Académique Documents
Professionnel Documents
Culture Documents
MX25-BFG
STANDARD MATERIALS Frame plate Mild steel, Epoxy painted Nozzles Carbon steel Metal lined: Stainless steel, Titanium Rubber lined: Nitrile, EPDM Plates Stainless Steel AISI 304, AISI316 or Titanium Gaskets Nitrile or EPDM
Flow principle of a plate heat exchanger
CONNECTIONS FMS PED Size 200/250 mm FMS pvcALS FGS PED FGS pvcALS FGS ASME FG PED FG pvcALS FG ASME FD PED FD ASME FS ASME Size 200/250 mm Size 200 mm Size 200/250 mm Size 8" Size 200/250 mm Size 200/250 mm Size 8"/10" Size 200/250 mm Size 8"/10" Size 8"/10"
DIN 2501 PN10, ASME Cl. 150 DIN 2501 PN10, ASME Cl. 150, JIS 10K DIN 2501 PN16, ASME Cl. 150 DIN 2501 PN16, ASME Cl. 150, JIS 16K ASME Cl. 150 DIN 2501 PN16, ASME CI. 150 DIN 2501 PN16, ASME Cl. 150, JIS 16 K ASME Cl.150 DIN 2501 PN25, ASME Cl. 300 ASME Cl. 300 ASME Cl. 400
1939
TECHNICAL DATA Pressure vessel codes PED, ASME, pvcALS Mechanical design pressure (g) / temperature FMS PED, pvcALS 1.0 MPa / 180C FGS PED, pvcALS 1.6 MPa / 180C FGS ASME 150 psig / 350F FG PED, pvcALS 1.6 MPa / 180C FG ASME 150 psig / 350F FD PED, pvcALS 2.5 MPa / 180C FD ASME 300 psig / 350F FS ASME 400 psig / 350F
Dimensions
W 439
1585 3385
Measurements (mm) Type H W MX25-FMS 2595 920 MX25-FGS 2595 920 MX25-FG 2895 920 MX25-FD 2895 940 MX25-FS 2895 940 The number of tightening bolts may vary depending on pressure rating Particulars required for quotation Flow rates or heat load Temperature program Physical properties of liquids in question (if not water) Desired working pressure Maximum permitted pressure drop Available steam pressure h 325 325 435 435 435 the
PPM00026EN 0412
Alfa Laval reserves the right to change specifications without prior notification.
How to contact Alfa Laval Contact details for all countries are continually updated on our website. Please visit www.alfalaval.com to access the information direct.