Académique Documents
Professionnel Documents
Culture Documents
NEW!
Measurement Values
Information
Display
Bar
SA
Bargraph
(Load factor Min - Max). The
bargraph indicates
the percentage
(0% to 100%) of full
range or full load
as programmed
into the PEL by the
user through the
DataView software.
FET Y
TM
RA
TIN G
ETHERNET
FEATURES
imple to use, single-, dual- (split-phase)
S
a
. nd three-phase (Y, ) power & energy loggers
rovides all the necessary functions for
P
P
. ower and Energy data logging for 50Hz, 60Hz,
4
. 00Hz and DC distribution systems
urrent measurements from 200mA up to
C
10,000A using flexible current sensors
utomatic recognition of the connected current
A
sensors/probes
ower measurements: VA, W and var
P
nergy measurements VAh, Wh (source/load
E
i
.ndication) and varh (including quadrant indication)
ecord cost of energy usage
R
ower Factor (PF), Cos (), Tan () and DPF
P
otal Harmonic Distortion (THD) for voltages
T
and currents
armonics up to the 50th order for 50/60Hz
H
voltages and currents and 7th order for 400Hz
imultaneous RMS measurements of each phase
S
@ 128 samples/cycle and DC
right blue, four line LCD on Model PEL 103
B
(3 phases shown simultaneously)
torage of measured and calculated values
S
on a SD-Card or SDHC-Card
onfiguration of current and voltage ratios
C
to external PT and CT ratios
SB, LAN, and Bluetooth communication
U
I
ncludes DataView software for data
storage, real-time display, analysis and report
generation with supplied pre-defined or custom
templates
Measurement
Units
Measurements
or Page Title
Mode Selection
Display Bar
DESCRIPTION
Phase Sequence reversal indicator or missing
phase (displayed in 3-Phase distribution systems)
Data available for recording (non-display indicates
possible internal problem)
Power Quadrant Indication
PRODUCT INCLUDES
Models PEL 102 & PEL 103
Models PEL 102 and PEL 103 include:
Small Classic Tool Bag, Three MiniFlex
MA193-10-BK Sensors (included with select
models), 5 ft USB Cable, Four Black Test Leads
and Alligator Clips, Power Cord, 12 Color-coded
ID Markers, Multifix Mounting System, Safety
Card for the PEL, Sensor Compliance Sheet, 2
GB SD-Card with USB-SD-Card Reader,
Quick Start User Guide and USB Stick
with DataView and User Manual.
www.aemc.com
SPECIFICATIONS
GENERAL
Sampling Frequency
Data Storage Rate
Demand Period Storage Rate
Recorded Parameters
(Single- and Poly-Phase)
Event Log
Front Panel Indicator LEDs
Storage Capacity
INPUTS
Voltage
Current
ELECTRICAL
VOLTAGE MEASUREMENT
50/60Hz
Single-Phase RMS Voltages
Phase-to-Phase RMS Voltages
400Hz
Single-Phase RMS Voltages
Phase-to-Phase RMS Voltages
DC
PT Ratios
CURRENT MEASUREMENT
Current Probe: MiniFlex Sensor MA193***
CT Ratios
POWER MEASUREMENTS
Active Power (P)*
Reactive Power (Q)*
Apparent Power (S)*
Power Factor
Tangent (active/reactive power ratio)
ENERGY MEASUREMENTS
Active Energy (EP)
Reactive Energy (EQ)
Apparent Energy (ES)
THD
Individual Harmonics
External Supply
Back-Up Power Source / Charge Time
Battery Life
MECHANICAL
Communication Ports
Dimension/Weight
Case / Index of Protection
RESOLUTION
0.1V
0.1 to 1V
0.1V
0.1 to 1V
0.1V
0.01V to 0.1V
* ACCURACY (% of Reading)
0.1Hz
0.2% Rdg 0.2V
0.2% Rdg 0.4V
1% Rdg 1V
1% Rdg 1V
1% Rdg 3V (typical)
200mA to 100Arms
0.8A to 400Arms
4A to 2000Arms
20A to 10,000Arms
1 to 100mA
10 to 100mA
0.1 to 1A
0.1 to 10A
Programmable from 1:1 to 25,000:1 (probe dependent)
1.2% 50mA
1.2% 0.2A
1.2% 1A
1.2%
-2 to 2GW
-2 to 2Gvar
0 to 2GVA
-1 to +1
-3.2 to +3.2
0.001W
0.001var
0.001VA
0.001
0.001
0 to 4 x 1018
0 to 4 x 1018
0 to 4 x 1018
1Wh
1varh
1Vah
655%
1 to 50 displayed in percentage; 1 to 7 at 400Hz
110V/250V (10%) @ 50/60Hz; 400Hz
Rechargeable 8.4V NiMH battery pack / Approximately 5 hours
Provides up to 30 minute ride through upon power loss
0.5% Rdg
2% Rdg
0.5% Rdg
Mounting / Security
Embedded magnets on back side, keyhole slot on back side / Kensington anti-theft system
DISPLAY
Display Type for Model PEL 103
2.63 x 2.16" (67 x 55mm), four line, monochrome, backlit LCD with adjustable brightness and contrast
ENVIRONMENTAL / SAFETY
Operating Temperature / Relative Humidity
32 to 122F (0 to 50C) / up to 85%
Storage Temperature
-4 to 122F (-20 to 50C) with batteries; -4 to 158F (-20 to 70C without batteries)
Safety Rating / CE Rating
Complies with IEC 61010-1:Ed3, and IEC 61010-2-030:Ed1 for 1000V CAT III / 600V CAT IV, Pollution Degree 2 / Yes
* Maximum value is current probe dependent. ** Computers with Class II Bluetooth will restrict range to 40ft. Computers without Bluetooth will require a Class I or Class II Bluetooth radio
adapter. *** Maximum current reduced by a factor of 2 for 400Hz fundamental frequency.
CATALOG NO.
DESCRIPTION
2137.51
2137.52
2137.61
2137.62
Power & Energy Logger Model PEL 102 (no LCD, w3 MA193-10-BK sensors)
Power & Energy Logger Model PEL 103 (with LCD, w3 MA193-10-BK sensors)
Power & Energy Logger Model PEL 102 (no LCD, no sensors)
Power & Energy Logger Model PEL 103 (with LCD, no sensors)
www.aemc.com