Académique Documents
Professionnel Documents
Culture Documents
GB FR I HU
Kdszm:
Kaminofen Bedienungs- und Aufstellanleitung Kdszm: 123789 Fireplace user instruction Chemine mode demploi Istruzioni per uso e installazione Kandall hasznlati tmutat
KF 198 51 KF 198 52 KF 198 55
KF 198 50 / 53
LUXOR
PLUTO PANORAMA
PLUTO RADIANT
COUNTRY
KF 198 56
PLUTO RONDO
COUNTRY - H
KF 198 57
D Vorwort
Sehr verehrter Kunde, wir beglckwnschen Sie zum Erwerb unseres Kaminofens. Sie haben die richtige Wahl getroffen. Mit dem Kauf dieses Produktes haben Sie die Garantie fr Hohe Qualitt durch Verwendung bester und bewhrter Materialien Funktionssicherheit durch ausgereifte Technik, die streng nach der europischen Norm DIN EN 13240 geprft ist (Gerte sind fr die Mehrfachbelegung geeignet) Lange Lebensdauer durch die robuste Bauweise Damit Sie recht lange Freude an Ihrem neuen Kaminofen haben, sollten Sie die folgende Bedienungsanleitung studieren. Hierin finden Sie alles Wissenswerte sowie einige zustzliche Tipps.
ACHTUNG Bei Ersatzteilbestellungen die am Typschild des Gertes eingetragene Artikel-Nr./Article No. und Fertigungs-Nr./Serial No. angeben.
Inhaltsverzeichnis
Vorwort ..........................................................................................................................2 Inhaltsverzeichnis ..........................................................................................................2 SICHERHEITSHINWEISE .............................................................................................3 1. Bedienung ................................................................................................................5 1.1 Gerteaufbau ......................................................................................................5 1.2 Inbetriebnahme ...................................................................................................6 1.3 Auerbetriebnahme ............................................................................................7 1.4 Hinweise zum Heizen ..........................................................................................7 1.5 Reinigung und Pflege ..........................................................................................8 1.6 Strungsursachen, Behebung ...........................................................................11 2. Aufstellung .............................................................................................................12 2.1 Vorschriften .......................................................................................................12 2.2 Aufstellrume ....................................................................................................12 2.3 Gerteabstnde ................................................................................................12 2.4 Schornsteinanschluss .......................................................................................13 3. Technische Daten ..................................................................................................15 3.1 Mazeichnungen ...............................................................................................15 3.2 Mae und Gewichte ..........................................................................................18 3.3 EG-Konformittserklrung .................................................................................20
2
SICHERHEITSHINWEISE
1. 2. Die Gerte sind nach DIN EN 13240 oder nach DIN EN 12815 geprft (Type nschild). Fr die Aufstellung und den abgasseitigen Anschluss sind die Forderungen der Feuerungsverordnung (FeuVO), die jeweiligen Lnderbauordnungen sowie die DIN 4705, DIN EN 13384, DIN 18160, DIN EN 1856-2 und der DIN EN 15287 zu beachten. Zur einwandfreien Funktion Ihres Gertes muss der Schornstein, an den sie das Gert anschlieen wollen, in einwandfreiem Zustand sein. Vor Erstinbetriebnahme und vor dem Schornsteinanschluss, die Bedienungsanleitung grndlich durchlesen und den zustndigen Schornsteinfegermeister i nformieren. Es wird empfohlen bei Aufstellung der Gerte saubere Baumwollhandschuhe zu tragen, um Fingerabdrcke, die spter schwierig zu entfernen sind, zu verme iden. Im Interesse der Luftreinhaltung und der sicheren Funktion des Gertes sollten die in der Bedienungsanleitung angegebenen max. Brennstoffaufgabemengen nicht berschritten werden und die Tren der Gerte geschlossen sein, da sonst die Gefahr des berheizens besteht, was zu Beschdigungen am Gert fhren kann. Beschdigungen solcher Art, unterliegen nicht der Garantiepflicht. Die Tren der Gerte mssen whrend des Betriebes immer geschlo ssen sein. Die zugelassenen Brennstoffe sind: - Naturbelassenes Scheitholz (bis max. 35cm Lnge) - Braunkohlebriketts (siehe zulssige Brennstoffe in der Bedienungsanleitung) Keine flssigen Anzndhilfen verwenden. Zum anznden sollten spezielle Anznder oder Holzwolle verwendet werden. Die Verbrennung von Abfllen, Feinhackschnitzeln, Rinden, Kohlegru, Spanplattenresten, feuchtem und mit Holzschutzmitteln behandeltem Holz, Papier, Pappe o.. ist verboten Beim ersten Anheizen knnte es zu Rauchentwicklung und Geruchsbelstigung kommen. Unbedingt fr gute Raumbelftung sorgen (Fenster und Tren ffnen) und mindestens eine Stunde auf max. Nennwrmeleistung heizen. Sollte beim ersten Heizvorgang die max. Temperatur nicht erreicht werden, so knnen diese Erscheinungen auch spter noch auftreten. Die Bedienelemente und die Einstelleinrichtungen sind entsprechend der Bedienungsanleitung einzustellen. Bitte benutzen sie bei heiem Gert die Hilfswerkzeuge oder einen Schutzhandschuhe zur Bedienung. Beim ffnen der Heiztr kann es bei Fehlbedienung oder bei nicht ausreiche ndem Schornsteinzug zu Rauchaustritt kommen. Es ist unbedingt zu beachten, dass die Heiztr nur langsam, zuerst einen Spalt und nach ein paar Sekunden ganz geffnet werden darf. Auerdem soll vor dem ffnen der Heiztr zum nachlegen von Brennstoff nur noch das Glutbett im Brennraum vorhanden sein, dass heit, es drfen keine Flammen mehr sichtbar sein. Im Heizbetrieb knnen alle Oberflchen und besonders die Sichtscheiben sowie die Griffe und Bedieneinrichtungen sehr hei werden. Machen sie Kinder und Jugendliche, ltere Menschen und Tiere auf diese Gefahren aufmerksam, und 3
3.
4.
5.
6. 7.
8. 9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21. 22.
23.
24. 25.
halten sie sie whrend des Heizbetriebes von der Feuersttte fern. Verwenden Sie zur Bedienung den beigelegten Schutzhandschuh oder das Hilfswerkzeug. Kinder und Jugendliche unter 16 Jahren drfen den Ofen ohne Aufsicht Erzi ehungsberechtigter nicht bedienen. Es ist darauf zu achten, dass der Aschekasten immer bis Anschlag eingeschoben ist und besonders darauf zu achten, dass keine heie Asche entsorgt wird (Brandgefahr). In der bergangszeit kann es zu Strungen des Schornsteinzuges kommen, so dass die Abgase nicht vollstndig abgezogen werden. Die Feuersttte ist dann mit einer geringen Brennstoffmenge, am besten mit Holzspne/ -Wolle zu befllen und unter Kontrolle in Betrieb zu nehmen, um den Schornsteinzug zu stabilisieren. Der Rost sollte sauber sein. Nach jeder Heizperiode ist es angebracht, die Gerte durch einen Fachmann kontrollieren zu lassen. Ebenfalls sollte eine grndlic he Reinigung der Abgaswege und der Abgasrohre erfolgen. Wenn Ausbesserungen oder Erneuerungen vorgenommen werden mssen, wenden sie sich bitte rechzeitig unter Angabe der genauen Art.-Nr. und Fert.-Nr. an Ihren Fachhndler. Es sind nur Original Wamsler-Ersatzteile zu verwenden. Arbeiten, wie insbesondere Installation, Montage, Erstinbetriebnahme und Servicearbeiten sowie Reparaturen, drfen nur durch einen ausgebildeten Fachb etrieb (Heizungs- oder Luftheizungsbau) durchgefhrt werden. Bei unsachgemen Eingriffen erlschen Gewhrleistung und Garantie. Da der Festbrennstoff-Ofen/Herd die zur Verbrennung bentigte Luft dem Aufstellungsraum entnimmt, ist dafr zu sorgen, dass ber die Un dichtheiten der Fenster oder Auentren stets gengend Luft nachstrmt. Ma n kann davon ausgehen, dass dieser durch ein Raumvolumen von mind. 4m je kW Nennwrmeleistung gewhrleistet ist. Ist das Volumen geringer, kann ber Lftungsf fnungen ein Verbrennungsluftverbund mit anderen Rumen hergestellt werden (min. 150 cm). Es ist darauf zu achten, dass die Abstnde zu brennbaren Bauteilen und Mater ialien -seitlich und hinten- eingehalten werden. Diese Abstnde entnehmen sie der Bedienungsanleitung oder dem Typenschild. Die Feuersttte darf nicht verndert werden. Der Anschluss an einem Schornstein, dessen wirksame Hhe unter 4 m, bei Mehrfachbelegung 5 m liegt, ist unzulssig. An dem zum Anschluss des Ofens vorgesehenen Schornstein drfen hchstens zwei weitere Feuersttten ang eschlossen sein. Bei einem Schornsteinbrand verschlieen sie sofort alle ffnungen am Gert und verstndigen sie die Feuerwehr. Versuchen sie auf keinen Fall selbst zu lschen. Danach unbedingt den Schornstein vom Fachmann berprfen lassen. Festbrennstoffe erzeugen naturgem Ru, ein Verschmutzen der Sichtsc heibe ist dadurch niemals vllig ausgeschlossen und stellt keinen Mangel dar. Speck- und Sandstein ist ein Naturstein, daher sind Farbabweichungen und Farbnderungen normal und kein Grund zur Reklamation!
1. Bedienung
1.1 Gerteaufbau
Abgasstutzen Wrmefach
Primrluftschieber
Bild 1
1.2 Inbetriebnahme
Brennstoffe Das Gert ist fr den Betrieb mit nachfolgend aufgefhrten Brennstoffen geeignet. Nur damit ist ein raucharmer und strungsfreier Betrieb gewhrleistet. Verwenden Sie nur natur belassenes, trockenes Scheitholz mit einer Restfeuchte von max. 20%. Brennstoffart Hartholz Weichholz Heizwert ca. KJ/kg 14.600 11.500
Nicht zulssige Brennstoffe sind z.B.: Die Verbrennung von Abfllen, Feinhackschnitzeln, Rinden, Spanplattenresten, Kohl egru, feuchtem oder mit Hol zschutzmitteln behandeltem Holz, Papier und Pappe o. . ist verboten. Zum Anznden sollte Holzwolle oder Grillanznder verwendet werden. Keine flssigen Anzndhilfen verwenden! Achtung! Beim ersten Anheizen knnte es zu Rauchentwicklung und Geruchsbelstigung kommen. Unbedingt fr gute Raumbelftung sorgen (Fenster und Tren ffnen) und mindestens eine Stunde auf max. Nennwrmeleistung heizen. Sollte beim ersten Heizvorgang die max. Temperatur nicht erreicht werden, so knnen diese Erscheinungen auch spter noch auftreten. Mit dem Primrluftschieber knnen Sie innerhalb des Regelbereiches alle gewnschten Heizleistungen stufenlos einstellen. Verbrennungslufteinstellung: Die Schiebereinstellungen mssen immer in der Mitte der Bezeichnungen Brennstoff Scheitholz Nennwrmeleistung Scheitholz Anheizen Tabelle 1 Fllmengen: Fllmenge bei Holz (Scheitholz, max. Lnge 35 cm) max. 2 Scheite pro Fllung ca. 1,8 kg. Holzbrikett max. 1,4 kg Primrluftschieber-Stellung H A
Erstes Anheizen Vor Inbetriebnahme sind die Transportsicherungen auf der Umlenkplatte ber dem Feuerraum (Bild 5) herauszunehmen und evtl. Aufkleber auf der Sichtscheibe rckstandsfrei zu entfernen.
Die Heiztr ffnen durch Heben des Griffes nach oben (Bild 2). Bei heiem Gert ist dazu ein isolierter Handschuh zu benutzen. Den Primrluftschieber (Bild 3) entsprechend der Tabelle 1 in Kapitel 1.2 einstellen. Kohleanznder oder Holzwolle auf den Rost legen, darber Holzspne geben. Darauf erst kleineres, dann greres Holz geben, anznden und Tr wieder verschlieen. Wenn das Feuer lebhaft brennt und eine ausreichende Grundglut vorhanden ist erneut Brennstoff aufgeben. Danach den Primrluftschieber entsprechend der Tabelle 1 Verbrennungsluf teinstellung einstellen. Das erste Anheizen sollte sanft verlaufen, mit geringer Menge Brennmaterial, damit sich die Ofenteile an die Hitze gewhnen knnen. Beim ersten Anheizen knnte es zu Rauchentwicklung und Geruchsbelstigung kommen. Unbedingt fr gute Raumbel ftung sorgen (Fenster und Tren ffnen) und mindestens eine Stunde auf max. Nennwrmeleistung heizen. Sollte beim ersten Heizvorgang die max. Temperatur nicht e rreicht werden, so knnen diese Erscheinungen auch spter noch auftreten. Den Brennstoff nicht in den Brennraum einwerfen, sondern einlegen, da sonst die Ausmauerung beschdigt werden kann. Achtung! Beim ffnen der Heiztr kann es bei Fehlbedienung oder bei nicht ausreiche ndem Schornsteinzug zu Rauchaustritt kommen. Es ist unbedingt zu beachten, dass die Heiztr nur langsam, zuerst einen Spalt und nach ein paar Sekunden ganz geffnet werden darf. Auerdem soll vor dem ffnen der Tr zum Nachlegen von Brennstoff nur noch das Glutbett im Brennraum vorhanden sein, das heit, es drfen keine Flammen mehr sichtbar sein.
1.3 Auerbetriebnahme
Tren schlieen, Primrluftschieber in geschlossene Stellung bringen. Restglut ausbrennen und Ofen abkhlen lassen. Feuerraum und Aschenkasten bei kaltem Gert reinigen und entleeren!
Schornsteinzug, da dieser bei hohen Auentemperaturen sehr gering sein kann. Zu diesem Zweck halten Sie ein brennendes Zndholz in die ein wenig geffnete Heiztr. Wenn die Flamme nicht deutlich angesaugt wird, ist zunchst ein sogenanntes Loc kfeuer zu erzeugen. Hierzu wird kurzzeitig Holzspne/-Wolle im Ofen oder in der Reinigungsffnung des Schornsteins entzndet. Der Rost sollte vor jeder Brennstoffaufgabe gereinigt werden, um eine gute Verbrennungsluftzufuhr zu gewhrleisten. Der Asche nkasten ist regelmig im kalten Zustand zu entleeren (Bild 4). Bei heiem Gert beiliegenden Handschuh verwenden. Bitte beachten Sie dabei, dass keine glhenden Ve rbrennungsrckstnde in die Mlltonne gelangen. Es ist darauf zu achten, dass der Aschenkasten immer bis Anschlag eingeschoben wird. Achtung ! Im Interesse der Luftreinhaltung und dem Ofen sollten die angegebenen max. Brennstoffaufgabemengen nicht berschritten werden, da sonst die Gefahr des berheizens besteht, was zu Beschdigungen am Gert fhren kann. Beschd igungen solcher Art, unterliegen nicht der Garantiepflicht. Bei Kaminfen ist nur eine einlagige Brennstoffaufgabe gestattet. Eine reduzierte Heizleistung sollte nur durch Verringerung der Aufgabemenge und nicht durch Reduzierung der Primrluft erfolgen.
Reinigen Sie Ihre ROBAX-S-Sichtscheibe vor der ersten Benutzung mit einem feuchten sauberen Tuch. Verreiben Sie danach einige Tropfen eines Pflegemittels fr Glaskeramik Scheiben mit einem Kchenpapier auf beiden Seiten der Scheibe. Nach dem Nachwischen und Trockenpolieren ist die hochwertige Oberflche von ROBAX S mit einem unsichtbaren Film berzogen, dieser hilft die Scheibe sauber zu halten und erleichtert bei regelmiger Wiederholung die Reinigung. Pflege von Keramikteilen: Schmutz und Fett kann mit Seife und Wasser entfernt werden. Pflege von Speckstein und Sandstein: Speck- und Sandstein ist ein Naturstein, daher sind Farbabweichungen und Farbnderungen normal und kein Grund zur Reklamation! Schmutz und Fett kann mit Seife und Wasser, kleine Kratzer mit Nassschleifpapier (Krnung 240) entfernt werden. Hinweis: Auf keinen Fall sollten Sie Schwmme, Scheuermittel, aggressive oder kratzende Reinigungsmittel verwenden! Arbeiten, wie insbesondere Installation, Montage, Erstinbetriebnahme und Servicearbeiten sowie Reparaturen, drfen nur durch einen ausgebildeten Fachbetrieb (Heizungs- oder Luftheizungsbau) durchgefhrt werden. Bei unsachgemen Eingriffen erlschen Gewhrleistung und Garantie.
Bild 2
Bild 3
Bild 5
10
Zu langes und undichtes Abgasrohr Undichtheiten an der Glas-/Heiz-/Aschentr Verbrennung von zu feuchtem Holz
11
2. Aufstellung
2.1 Vorschriften
Fr die Aufstellung und den abgasseitigen Anschluss sind die Forderungen der Feuerungsverordnung (FeuVO), die jeweiligen Lnder bauordnungen sowie die DIN 4705, DIN EN 13384, DIN 18160, DIN EN 1856-2 und der DIN EN 15287 zu beachten. Zur einwandfreien Funktion Ihres Gertes muss der Schornstein, an den sie das Gert anschlieen wollen, in einwandfreiem Zustand sein.
2.2 Aufstellrume
Da der Kaminofen die zur Verbrennung bentige Luft dem Aufstellungsraum e ntnimmt ist dafr zu sorgen, dass ber die Undichtheiten des Fensters oder Auentren stets gengend Luft nachstrmt. Zustzlich ist sicherzustellen, dass ein 3 Raum-Leistungsverhltnis von mind. 4 m je kW Nennwrmeleistung gewhrleistet ist. Fr den Kaminofen bedeutet dies, dass der Aufstellungsraum mindestens 3 26 m gro sein muss. Ist das Volumen geringer, muss ber Lftungsffnungen ein Verbrennungsluftverbund mit anderen Rumen hergestellt werden (Verbundffnungen mind. 150 cm).
2.3 Gerteabstnde
Alle brennbaren Bauteile, Mbel oder auch z.B. Dekostoffe in der nheren Umgebung des Ofens sind gegen Hitzeeinwirkung zu schtzen. Einrichtungsgegenstnde im Strahlungsbereich Im Sichtbereich (Strahlungsbereich) des Feuers muss zu brennbaren Bauteilen, Mbel oder auch z.B. zu Dekostoffen ein Abstand von mindestens 80 cm (A), gemessen ab Vorderkante Feuerraumffnung eingehalten werden. Der Siche rheitsabstand reduziert sich auf 40 cm (B), wenn ein belfteter Strahlungsschutz vor das zu schtzende Bauteil montiert wird (Beispiel siehe Bild 6) Einrichtungsgegenstnde auerhalb des Strahlungsbereichs Die Stellwnde seitlich und hinter dem Gert drfen nicht aus brennbaren Ba ustoffen hergestellt, oder mit brennbaren Baustoffen verkleidet sein, sofern ein Abstand von seitlich 30 cm und hinten 20 cm unterschritten wird. Der Seitenabstand zu Mbelteilen aus Holz oder Kunststoff muss ebenfalls 30 cm betragen (Bild 7).
Bild 6
12
Bild 7
Boden unter und vor dem Ofen Fubden aus brennbarem Material, wie Teppich, Parkett oder Kork, mssen unter dem Ofen sowie von der Feuerraumffnung 50 cm nach Vorne und 30 cm seitlich durch einen Belag aus nicht brennbaren Baustoffen, z.B. Keramik, Stein, Glas oder einer Bodenplatte aus Stahl, ersetzt oder geschtzt werden.
2.4 Schornsteinanschluss
ACHTUNG! Vor dem Anschluss des Gertes ist in jedem Fall der zustndige Bezirks Schornsteinfegermeister zu Rate zu ziehen! Verbindungsstcke mssen am Gert und untereinander fest und dicht verbunden sein. Sie drfen nicht in den freien Schornsteinquerschnitt hineinragen. Das Verbindungsstck zwischen Kaminofen und Schornstein soll den gleichen Querschnitt haben wie der Rohrstutzen am Ofen. Waagerechte Verbindungsst cke ber 0,5 m sollen zum Schornstein hin um 10 Grad ansteigen. Rohre, die nicht wrmegeschtzt oder senkrecht gefhrt sind, sollen nicht lnger als einen Meter sein. Es sind die Forderungen der Feuerungsverordnung (FeuVO), die jeweiligen Lnderbauordnungen sowie fr X den Schornstein die DIN 4705, DIN EN 13384, DIN 18160 und der DIN EN 15287 zu beachten. Verbindungstcke mssen nach DIN EN 1856-2 geprft sein. Das Ma X (Abstand zu brennbaren Baustoffen / Materialien) muss nach Angaben des Herstellers des Verbindungsstckes eingehalten werden.
Bild 8 ACHTUNG! Der Anschluss an einem Schornstein, dessen wirksame Hhe unter 4 m, bei Mehrfachbelegung 5 m liegt, ist unzulssig. Beachten Sie die Daten zur Schornsteinberechnung in Kapitel 3.1. An dem zum Anschluss des Ofens vorgesehenen Schornstein drfen hchstens zwei weitere Feuersttten angeschlossen sein.
In der Regel kann der Ofen mit einem Bogen direkt an den Schornstein angeschlossen werden.
Bei geringem Schornsteinzug sollte der Ofen durch ein Senkrechtes Abgasrohr, das als Anlaufstrecke dient, mit dem Schornstein verbunden werden.
Bild 9
13
Richtig
mind. 50 cm
Falsch
mind. 5m
mind. 30 cm
14
unter 5m
3. Technische Daten
3.1 Mazeichnungen KF 198 50 KF 198 53 KF 198 51
KF 198 52
KF 198 55
15
PLUTO PANORAMA
COUNTRY
LUXOR
COUNTRY-H
16
PLUTO RADIANT
PLUTO RONDO
KF 198 56
KF 198 57
17
Typ Nennwrmeleistung Raumheizvermgen bei Zeitheizung in m - bei gnstigen, - weniger gnstigen und - ungnstigen Heizbedingungen nach DIN 18893/TAB. 2 Abgaswerte: Brennstoff: Abgasmassenstrom Abgastemperatur min. Frderdruck bei Nennwrmeleistung Staub (bezogen auf 13% O2) CO (bezogen auf 13% O2) Wirkungsgrad
198 50/51/52/53/55/56/57 6,5 kW 132 78 52 Scheitholz 6 g/s 300 C 11 Pa < 40 mg/m 0,12 % > 78%
001985000 001985004 001985005 001985006 001985009 001985010 001985011 001985012 001985014 001985015 001985020 001985022 001985024 001985026 001985030 001985035 001985038 001985040 001985045 001985048 001985050 001985051 001985052 001985053 001985054 001985055 001985060 001985066 001985070 001985080 001985085 001985100
557 557 557 557 557 557 557 588 557 588 557 588 588 588 557 557 557 851 557 593 557 557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 427 468 468 531 427 435 427 531 531 531 516 516 516 408 468 468 427 427 427 427 427 427 427 427 427 427 427 427
904 904 904 904 904 1057 1057 904 904 904 904 924 924 924 924 904 924 1254 904 1032 904 904 904 904 904 904 904 1022 904 904 904 1022
88 88 88 88 88 85 131 84 93 80 114 96 96 96 151 87 98 112 130 135 123 101 101 101 101 123 88 85 88 101 101 85
98 98 98 98 98 95 141 97 103 92 124 109 109 109 163 99 110 132 140 145 133 111 111 111 111 133 98 100 98 111 111 100
001985101 001985103 001985140 001985160 001985175 001985170 001985185 001985190 001985200 001985201 001985202 001985203 001985204 001985205 001985211 001985221 001985222 001985225 001985241 001985242 001985245 001985252 001985255 001985260 001985300 001985301 001985302 001985304 001985305 001985306 001985307 001985310
557 610 557 557 557 557 610 610 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557
427 452 427 427 427 427 452 452 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427
1022 1050 1022 1022 1022 1022 1050 1050 980 980 980 980 980 980 980 980 980 980 980 980 980 940 940 940 904 904 904 929 904 904 904 924
85 103 118 115 103 85 103 103 86 86 86 86 86 86 112 117 86 124 124 124 89 112 83 83 83 119 88 83 83 131
100 118 133 130 118 100 118 118 88 88 88 101 101 88 114 119 101 126 139 126 104 127 85 85 85 129 90 85 85 133
18
Art.Nr. 001985340 001985344 001985345 001985346 001985348 001985380 001985500 001985505 001985508 001985520 001985525
Breite (mm) A 557 557 557 557 557 557 557 557 557 557 557
Tiefe (mm) B 427 427 427 427 468 427 427 427 427 427 427
Hhe (mm) C 929 904 904 929 904 904 1023 1023 1023 1023 1023
Gewicht netto: (Kg) 152 131 131 119 118 101 88 88 88 119 119
Gewicht brutto: (Kg) 162 133 133 129 120 111 96 96 96 127 127
Art.Nr.
Breite (mm) A
Tiefe (mm) B
Hhe (mm) C
001985540 001985550 001985610 001985615 001985621 001985701 001985711 001985715 001985721 001985740
557 557 557 557 557 557 557 557 557 557
427 427 492 492 492 516 516 516 516 516
1023 1023 930 930 930 905 929 929 929 905
Die angefhrten Abmessungs- und Gewichtangaben sind nur zur Information! Wir behalten uns das Recht von Konstruktionsnderungen vor, falls diese das technische Niveau erhhen, oder die Qualitt v erbessern!
19
3.3 EG Konformittserklrung
Wir behalten uns nderungen vor, die dem technischen Fortschritt dienen und/oder Qualittsverbesserungen bewirken. Fr Druckfehler und nderungen nach Drucklegung bernehmen wir keine Haftung.
20
GB
Foreword
Dear Customer! Thank you for choosing our product! By purchasing this product you receive guarantee for good quality originating from the usage of the finest and proven materials, operating security which is controlled according to German and European norms (Corresponds to the standards DIN 18891 Construction Shape 1 and EN 13240) long life ensured by the robust structure. In order to be able to use your new fireplace for a long time please read the following instructions manual. You will find all the necessary information in it and some additional advice. ATTENTION! It is necessary to quote the article number and the serial number on the model plate when ordering parts!
Contents
Foreword ......................................................................................................................21 Contents ......................................................................................................................21 SAFETY INSTRUCTIONS ...........................................................................................22 1. Usage ......................................................................................................................24 1.1 Structure of the equipment ................................................................................24 1.2 Installation .........................................................................................................25 1.3 Putting out of operation .....................................................................................26 1.4 Heating instructions ...........................................................................................26 1.5 Cleaning and maintenance ...............................................................................27 1.6 Potential problems and how to tackle them ......................................................29 2. Placing ....................................................................................................................30 2.1 Prescriptions .....................................................................................................30 2.2 Place of installation ...........................................................................................30 2.3 Distances ..........................................................................................................30 2.4 Connection of the fireplace ...............................................................................31 3. Technical specification .........................................................................................33 3.1 Dimensional drawings .......................................................................................33 3.2 Dimension .........................................................................................................36 3.3 EC Declaration of Conformity ............................................................................37
21
SAFETY INSTRUCTIONS
1. This equipment has been certified under the requirements of standard DIN EN 13240 or DIN EN 12815 (see the model plate). 2. For setting purposes and connection to the chimney, the fire protection requirements as prescribed in the given locations, as well as standards DIN 4705, DIN EN 13384, DIN EN 1856-2 and DIN EN 15287 should be complied with. For the problem-free functioning of the equipment, the chimney that the fireplace is to be connected to has to be in perfect conditions (Germany). 3. Before the first commissioning and connection to the chimney, these user instructions are to be read thoroughly, and the competent chimney sweeper has to be informed. 4. It is recommended to use clean cotton gloves for the setting of the equipment in order to avoid the appearance of fingerprints that would be hard to eliminate later on. 5. In order to keep the air clean and maintain the equipment properly, the maximum fuel quantities specified in these safety instructions may not be exceeded, and the doors of the equipment have to be kept closed, otherwise the equipment may overheat, leading to damage. No guarantee is provided for such damage. 6. During operations, the doors of the equipment are to be kept always closed. 7. Permissible fuels: - natural wood (max. 35 cm in length) - brown coal briquette (see user instructions) 8. Never use liquid igniters. Use special ignition materials or wood wool for the kindling of the fire. 9. Never use wastes, fine wooden chips, mulch, coal debris, particle board wastes, wet wood or wood treated with wood-protective agents, paper or cardboard, or similar materials for burning. 10. Upon the first kindling, smoke and unpleasant smell may be generated. Always ensure the proper ventilation of the room (by opening windows and doors), and heat the fireplace at maximum rated heating performance. If with the first heating the maximum temperature is not reached, the above-mentioned effects may as well arise later on. 11. The operating elements and adjustment units are to be used as described in these user instructions. If the equipment is hot, use auxiliaries or protective gloves for the handling of the equipment. 12. When opening the furnace chamber door, any incorrect handling or insufficient draught may induce smoke. Always ensure that the furnace chamber door may be opened only slowly, first just to a small extent, and then fully after a few seconds. In addition, if you intend to put additional fuel into the fire, before the opening of the door only there
22
13.
14. 15.
16.
17.
18.
19.
20. 21.
22.
may be only ember bed in the burning space, i.e. no flames may be visible. In heating mode, the surfaces, inspection glasses and handles may become very hot. Warn children of these threats, and keep them away from the fireplace when heated. Ensure that the ashtray should be fully inserted, and in particular never remove hot ash from the fireplace (fire risk). In transitional periods, chimney draught may drop, resulting in the imperfect suction of the generated flue gases. In such cases, the fireplace is to be filled with smaller quantities of fuel, preferably wooden chips or wood wool, and it is to be commissioned under control with the stabilization of the chimney draught. The fire grate should always be kept clean. After the heating season, it is recommended to have the equipment inspected by an expert. It is also advisable to clean the routes of flue gases and pipes. Should repairs or reconditioning be needed, please, contact your dealer in a timely manner with the accurate specification of the article and serial number. Only original Wamsler parts may be used. As the air needed for burning is drawn from the room where the fireplace is located, ensure that sufficient air supply is received via the 3 gaps by the windows and external doors. Make sure that 4 m of air should be provided to each kW of rated performance. For this fireplace, it means that the room has to be at least 26 m in volume. If the room is smaller, sufficient air supply can be secured by opening air 2 connections to other rooms with air openings (at least 150 cm ). Ensure to keep proper lateral and rear distances from combustible parts and materials. The associated values are specified in these user instructions or the model plate. The fireplace may not be modified. The connection of the fireplace to the chimney is not permissible if the effective height of the chimney is less than 4 m, or 5 m with multiple loading. To the chimney that the fireplace uses, a maximum of two other fireplaces, ovens may be connected. In the event of any chimney fire, immediately close all the openings of the equipment, and call the fire service. Never try to extinguish the fire with water. Thereafter, always have the chimney inspected by an expert.
23
1. Usage
1.1 Structure of the equipment
picture 1
24
GB 1.2 Installation
Fuels The equipment can be used with fuels detailed in the followings. This way the low-smoke and trouble-free operation can be secured. Use only dry wood with a moisture of maximum 20%.
Filling quantities -Split billet: max. length: 35 cm max. 2 billets per filling, appr. 1.8 kg -Wooden briquette: max. 1.4 kg Fuel Wood Wood Nominal heating performance Warming up, kindling Table 1 IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with preventive chemicals, furthermore paper and cardboard. For kindling please use wood scrapings or grill starter but never use liquid auxiliaries! The first kindling At the first fire set-up could be a little smoke, but is not dangerous, normal! In this time, please ventilate the room carefully! Warning! Upon the first kindling, smoke and unpleasant smell may be generated. Always ensure the proper ventilation of the room (by opening windows and doors), and heat the fireplace at maximum rated heating performance. If with the first heating the maximum temperature is not reached, the above-mentioned effects may as well arise later on. Setting of the primary air regulator H A
25
Before installation pull out the delivery securer off the refractory brick through the furnace chamber (picture no. 5). Open the door by raising the handle (Picture 2). If the equipment is hot, you can use insulated gloves. Adjust the primary air regulator and the fuel switch (Picture 3) according to the Table 1. Put coal lighter or wood wool onto the fire grate, followed by wood chips. First insert small pieces of wood, and then larger ones, light them and close the door again. When the wood burns quickly, and leaves sufficient glowing embers, put additional fuel on the fire. Thereafter, adjust the primary air regulator and the fuel switch according to the Table 1 (Adjustment of the burning air). The first kindling should be performed finely with little fuel only, so that the parts of the fir eplace be adapted to heat. During the first kindling, the generation of smell is normal and absolutely undangerous.
26
GB
Warning! In order to keep the air clean and safeguard the fireplace, do not exceed the specified maximum fuel quantity, otherwise overheating may occur, which potentially damage the equipment. Such damage is not covered with any guarantee. Only a single layer of fuel is allowable to be prepared in the fireplace. Try to reach lower heating performance only by decreasing the quantity of fuel, and not by cutting the primary air supply.
27
picture 2
picture 3
picture 4
picture 5
28
Actions to be in chimney fire! Chimney fire may occur upon the improper cleaning of the chimney, the use of inappropriate fuels (e.g. excessively wet wood) or the inadequate setting of the burning air. In such cases, close the burning air at the fire, and call the fire service. Never try to extinguish the fire with water!
29
GB
2. Placing
2.1 Prescriptions
When placing the fire-place and jointing the smoke tube side the fire protection requirements of the relevant construction provisions must be taken into consideration. For the problem-free functioning of the equipment the chimney which the fireplace uses must be in perfect condition.
2.3 Distances
All combustible equipment, furniture or e.g. decoration materials which are in the close environment of the fire-place shall be protected from the heat. Furnishings in the radiation area Keep a minimal distance of 80 cm (A) between the front cover of the fire-place and the combustible equipment, furniture or e.g. decoration materials. The security distance can be lowered to 40 cm if a heat shield is put in front of the object to be protected (B) (see our example on drawing no. 6). Furnishings outside the radiation area The walls beside and behind the fire-place shall not be made of combustible materials and they cannot be covered by such materials, unless the distance on the sides is more than 30 cm and behind is more than 20 cm. Similarly to the wooden and plastic furniture on the sides a distance of 30 cm shall be kept (see drawing no. 7).
picture 6
30
picture 7
Floor in front of and under the fireplace Floors made from combustible materials, such as carpets, parquet floors or cork is to be protected by a shield of non-combustible material for example ceramics, stone, glass or steel placed under the fireplace so that it should reach out to 50 cm in front and 30 cm besides.
With weak chimney draught, the fireplace is to be connected to the chimney through a vertical flue gas pipe facilitating discharge.
31
GB Right
min.50cm min.5m
Not right
Lower as the top of the roof Tightening cross section of the chimney because the smoke tube is pushed into the chimney too much Obstruction because the smoke tubes are led as facing each other Faulty draught because a fire-places door (not in use) is open False air because of an open tube joint False air because of a leaky tube joint False air because of open fire-place door
min.30cm
32
below 5m
3. Technical specification
3.1 Dimensional drawings KF 198 50 KF 198 53 KF 198 51
KF 198 52
KF 198 55
33
LUXOR
COUNTRY-H
34
KF 198 56
KF 198 57
Typ Nominal performance Heating capacity (m ) -under favourable -less favourable -not favourable heating circumstances according to 18893/TAB2 DIN standard
35
3
132 78 52
Flue gas values: fuel: Flue gas stream: Flue gas temperature: Min. blast pressure at nominal performance:
3.2 Dimension
Art.No. width (mm) draught (mm) height (mm) weight netto (Kg) weight brutto (Kg) Art.No. width (mm) draught (mm) height (mm) weight netto (Kg) weight brutto (Kg)
001985000 001985004 001985005 001985006 001985009 001985010 001985011 001985012 001985014 001985015 001985020 001985022 001985024 001985026 001985030 001985035 001985038 001985040 001985045 001985048 001985050 001985051 001985052 001985053 001985054 001985055 001985060 001985066 001985070 001985080 001985085 001985100
557 557 557 557 557 557 557 588 557 588 557 588 588 588 557 557 557 851 557 593 557 557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 427 468 468 531 427 435 427 531 531 531 516 516 516 408 468 468 427 427 427 427 427 427 427 427 427 427 427 427
904 904 904 904 904 1057 1057 904 904 904 904 924 924 924 924 904 924 1254 904 1032 904 904 904 904 904 904 904 1022 904 904 904 1022
88 88 88 88 88 85 131 84 93 80 114 96 96 96 151 87 98 112 130 135 123 101 101 101 101 123 88 85 88 101 101 85
98 98 98 98 98 95 141 97 103 92 124 109 109 109 163 99 110 132 140 145 133 111 111 111 111 133 98 100 98 111 111 100
001985101 001985103 001985140 001985160 001985175 001985170 001985185 001985190 001985200 001985201 001985202 001985203 001985204 001985205 001985211 001985221 001985222 001985225 001985241 001985242 001985245 001985252 001985255 001985260 001985300 001985301 001985302 001985304 001985305 001985306 001985307 001985310
557 610 557 557 557 557 610 610 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557
427 452 427 427 427 427 452 452 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427
1022 1050 1022 1022 1022 1022 1050 1050 980 980 980 980 980 980 980 980 980 980 980 980 980 940 940 940 904 904 904 929 904 904 904 924
85 103 118 115 103 85 103 103 86 86 86 86 86 86 112 117 86 124 124 124 89 112 83 83 83 119 88 83 83 131
100 118 133 130 118 100 118 118 88 88 88 101 101 88 114 119 101 126 139 126 104 127 85 85 85 129 90 85 85 133
Art.No.
width (mm)
draught (mm)
height (mm)
36
001985520 001985525
557 557
427 427
1023 1023
119 119
127 127
Art.No.
width (mm)
draught (mm)
height (mm)
The specified dimensions and weights are approximate values, and thus have only informative purposes. We reserve the right to modify the designs as required in terms of technology or quality!
001985540 001985550 001985610 001985615 001985621 001985701 001985711 001985715 001985721 001985740
557 557 557 557 557 557 557 557 557 557
427 427 492 492 492 516 516 516 516 516
1023 1023 930 930 930 905 929 929 929 905
37
ppa.
FR
Prambule
Cher Client, Nous vous flicitons davoir achet un pole Wamsler. Vous avez fait le bon choix car ce produit est pour vous une garantie de grande qualit, grce lemploi de matriaux excellents et prouvs
38
de scurit de fonctionnement, grce une technique parfaitement au point et svrement contrle selon la norme europenne EN 13240. de longvit, grce la robustesse de construction. Pour utiliser longtemps votre appareil, lisez attentivement cette notice. Vous trouverez des informations concernant linstallation, lutilisation, lentretien ainsi que des indications vous permettant dconomiser lnergie. Cette notice cite certaines rglementations, mais n'est en aucun cas exhaustive. Pour une installation correcte, il convient donc de se reporter aux normes et rglementations locales et nationales ainsi qu'aux normes europennes. En particulier il est impratif de respecter les normes suivantes avec leurs additifs et leur ventuelles mise jour. - la norme franaise DTU 24.1 P1 / 51-201 relative aux travaux de fumisterie. - la norme europenne EN 13384-1 relative une mthode de calcul des conduits de fume. - la norme europenne EN 12391-1 relative la mise en oeuvre de conduits double parois en mtal. (Cette norme doit tre prochainement remplace par la norme europenne EN 15287-1 relative a la mise en oeuvre des conduits pression ngative) Les normes DTU peuvent tre commandes par internet l'adresse : http://boutique.cstb.fr Les normes EN peuvent tre commandes par internet l'adresse : http://www.boutique.afnor.org Pour garantir une combustion propre et prserver notre environnement les chambres de combustion des poles doivent tre les plus chaudes possibles. Pour cela elles sont isoles avec des plaques de vermiculite. La vermiculite est un excellent isolant qui rsiste au contact de la flamme mais qui est sensib le aux chocs. Ces plaques sont des produits dits consommables et vous pourrez tre amen les remplacer. La garantie de ces pices est assure pendant 6 mois contre tout dfautFR de fabrication. Pour les prserver il faut veiller respecter les quantits maximum de bois (indiques dans cette notice) et viter les chocs lors de l'introduction des bches. Ainsi vous pourrez profiter de votre pole plusieurs saisons sans les remplacer. La pierre ollaire est un produit naturel avec des nuances de couleur et des veines, en aucun cas l'aspect de la pierre est un motif de rclamation. Attention
39
Pour toute commande de pices de rechange indiquer le de type, le de rfrence et le de srie inscrits sur la plaque signaltique de lappareil.
Sommaire
Prambule .............................................................................................................. 38 Sommaire ............................................................................................................... 40 CONSIGNES DE SECURITE ................................................................................. 40 1. Utilisation .......................................................................................................... 43 1.1 Description de lappareil ............................................................................... 43 1.2 Mise en service ............................................................................................ 44 1.3 Extinction...................................................................................................... 45 1.4 Le pole ne peut fonctionner quavec la porte ferme ................................. 45 1.5 Nettoyage et entretien .................................................................................. 45 1.6 Anomalies .................................................................................................... 48 2. Installation ......................................................................................................... 49 2.1 Prescriptions d installation........................................................................... 49 2.2 Air de combustion ........................................................................................ 49 2.3 Distances minimum ...................................................................................... 50 2.4 Raccordement au conduit de chemine....................................................... 51 3. Donnes technipues ........................................................................................ 52 3.1 Plans avec les dimensions ........................................................................... 52 3.2 Dimensions .................................................................................................. 55 3.3 Dclaration de conformit CE ...................................................................... 56
FR CONSIGNES DE SECURITE
1. 2. Les appareils ont t examins suivant les normes DIN EN 13240 ou DIN EN 12815 (tableau dfinissant le type de lappareil). En ce qui concerne linstallation et le raccordement de lappareil la chemine, il faut respecter les dispositions nationales relatives au chauffage et les dispositions des normes DIN 4705 et DIN 18160. Pour le bon fonctionnement de lappareil, il est indispensable que la chemine laquelle lappareil sera raccord soit en parfait tat (Germania).
40
3.
4. 5.
6. 7. 8. 9.
10.
11.
12.
13.
14.
Avant la mise en service de lappareil et son raccordement la chemine, il faut lire attentivement le mode demploi et informer le ramoneur comptent. Pour linstallation de lappareil, nous vous conseillons dutiliser des gants de laine propres pour viter les traces de doigts. Pour viter des problmes dair et lintrt du bon fonctionnement de lappareil, il est interdit de dpasser la quantit maximale de combustible, indique dans les instructions dutilisation et il faut tenir fermes les portes de lappareil. Nous pouvons ainsi viter le surchauffage qui pourrait causer lendommagement de lappareil. La garantie ne couvre pas ces types dendommagement. Pendant le fonctionnement de lappareil, les portes doivent rester fermes. Combustibles autoriss: bois naturel (longueur maximale: 35 cm) ventuellement lignite agglomr ( voir les instructions dutilisation) Il est interdit dutiliser de combustible liquide. Pour allumer le feu, il faut utiliser une matire inflammable spciale ou de la fibre de bois. Il est interdit de brler dans lappareil des ordures, menu bois, corce, dbris de charbon, restes de planche de copeaux, bois humide ou trait de produit chimique, papier, carton et des choses pareilles. Au cours de la premire utilisation, il se produit ventuellement de la fume et des odeurs dsagrables. Il faut veiller la bonne aration de la pice (fentres et portes ouvertes) et il faut garder le chauffage pendant au moins une heure la valeur nominale maximale. Si la premire utilisation, la valeur natteint pas la temprature maximale, les phnomnes ci-dessus mentionns peuvent se reproduire. Linstallation et lutilisation de lappareil doivent se faire selon les instructions du mode demploi. Si la temprature extrieure de lappareil est trop leve, nous vous conseillons dutiliser pour le maniement les accessoires ou les gants de protection. Louverture de la porte peut mener au mauvais fonctionnement, o u en cas de tirage de chemine insuffisant, la production de fume. Au moment de louverture de la porte il faut procder lentement, dabord lentrouvrir, et aprs quelques secondes louvrir compltement. Si vous voulez ajouter du combustible, avant louverture de la porte, il faut vrifier qu lintrieur il ne reste que du lit de braise, cest--dire il ny a plus de flammes. En mode de chauffage, la surface de lappareil, les fentres et les poignes peuvent devenir trs chaudes. Il faut informer les enfants de ce danger et veiller ce quils ne puissent pas toucher la chemine. Il faut vrifier que le cendrier est mis sa place correctement, il faut faire une attention particulire ne jamais vacuer la cendre chaude (risque dincendie).
41
15. Pendant les priodes transitoires, lintensit du tirage de chemine peut baisser ce qui peut baisser lintensit de lvacuation des gaz produits. Dans ce cas-l, il faut charger la chemine dune plus petite quantit de combustible, par exemple de fibres de bois ou de laines de bois, la mettre en service sous surveillance et stabiliser le tirage de chemine. La grille doit tre toujours nettoye. 16. A la fin de chaque priode de chauffage, un spcialiste doit faire une vrification globale de lappareil. Nous vous conseillons de nettoyer les tuyaux de gaz et des conduites. 17. Si des travaux de rparation ou de rnovation deviennent ncessaires, adressez-vous temps votre reprsentant commercial avec lindication exacte du numro darticle et du numro de fabrication. Il faut toujours utiliser des pices de rechange de Wamsler. 18. Etant donn que les chemines combustible solide utilisent lair du local pour la combustion, il faut assurer la quantit dair ncessaire travers les fentres et les portes extrieures. Comme point de dpart, il faut calculer 4 cubes dair par 1 kW de puissance calorifique nominale. Si le volume dair est infrieur cette valeur, il faut assurer de lair pour la combustion par la connection avec les autres pices (min. 150cm2). 19. Il faut respecter les distances obligatoires par rapport des matires et des objets inflammables ct et derrire lappareil. Ces distances sont indiques dans les instructions dutilisation ou sur la plaque de donnes. 20. Il est interdit de raliser des changements techniques sur la chemine. 21. Il est interdit de raccorder lappareil une chemine dont la hauteur efficace est infrieure 4 mtres ou, en cas de charges multiples, 5 mtres. Sur la mme chemine, on peut raccorder au maximum deux appareils. 22. En cas dincendie dans la chemine, il faut fermer toutes les ouvertures de lappareil et avertir les pompiers. Il ne faut jamais essayer dteindre le feu. Aprs lincident, il faut faire faire une vrication globale par un spcialiste.
42
FR
1. Utilisation
1.1 Description de lappareil
Porte foyre
Cendrier
Poigne douverture
Bcher
fig. 1
43
Rglage dair primaire : Utilisation Bois Bois Puissance nominale Allumage 1 tabelle Rglage air primaire H A
44
FR
Avant le premier allumage:
Avant le premier allumage retirez les lments de protection pour le transport (voir figure 5).
Le premier allumage :
ATTENTION : Il est normal que lors des premires utilisations de votre appareil, il y ait un dgagement d'odeurs et de fumes dues la cuisson de la peinture. CONSEIL : Choisir une belle journe pour raliser les premiers allumages, cela vous permettra douvrir les fentres. Commencez par un petit feu dune heu re puis augmentez progressivement l'allure. L'allumage vrifier que votre prise d'air extrieure est ouverte. ouvrir la porte en basculant la poigne vers le haut. (voir fig. 2.) ouvrir la prise dair primaire (voir fig. 3.) disposez un peu de papier ou dallume feu conseill pour le bois (sans soufre), sur la grille puis un peu de petit bois et ensuite du bois plus gros. Allumez et fermez la porte. Nutilisez en aucun cas de produit inflammable liquide.
1.3 Extinction
Laissez toujours brler compltement le pole jusqu ce quil steigne de lui mme. Ne jamais utiliser de l'eau pour teindre votre pole. Lors de la mise hors service en fin de saison de chauffage, videz le foyer et le tiroir cendres, fermez la porte et le rglage dair primaire. La prise d'air extrieur peut galement tre ferme.
Avant de commencer le nettoyage assurez-vous que le pole soit bien froid. Lintervalle entre les nettoyages dpend du temps d'utilisation et de la qualit des combustibles utiliss. Aspiration des cendres Dans ltre le bois brle et laisse des cendres. Attention : il peut rester des tisons chauds dans les cendres. Mettez les dans un bidon en tle. La cendre peut tre aussi pousse dans le cendrier qui se trouve sous la grille de combustion. La cendre est un produit naturel. Mlange la terre c'est un engrais de grande qualit appropri au jardin, la pelouse et aux fleurs en pot. Nettoyage de la vitre Le combustible bois produit naturellement de la suie, ce qui entrane la salissure de la vitre. Vous devez utiliser des produits spciaux pour vitre d'appareil de chauffage au bois. Ces produits lave vitres ne doivent tre utiliss que pour le nettoyage de la partie intrieure de la vitre. Toutes les autres surfaces vitres se nettoient facilement avec un chiffon humide ou un lave vitres et se rincent avec un chiffon doux. Lors de ces nettoyages veillez ne pas projeter de produit sur les parties peintes. (rin cez immdiatement leau claire et essuyez avec un chiffon doux.) La vitre reste propre plus longtemps si vous suivez ces quelques recommandations : Utilisez de petites bches et en petites quantits Pas de combustible humide ! Lors de la combustion de la vapeur deau schappe du bois , se dpose, et condense sur la vitre froide. Utilisez des allumes feux adapts, pas de papier glac ni de carton. Faites le feu le plus loin possible de la vitre afin d'viter un contact direct avec celle-ci. Nettoyage des parties peintes Les surfaces peintes doivent tre nettoyes avec un chiffon doux et lgrement humide, nutilisez pas de produit dtergent. Nettoyage des pierres ollaires Pour le nettoyage de la pierre vous pouvez utiliser de l'eau savonneuse. Vous pouvez galement utiliser du papier de verre grain 240 pour les taches rsistant au nettoyage avec l'eau savonneuse. Attention Nutilisez jamais de dtergent agressif, dponges abrasives ou tout autre pr oduit dentretien rcurant.
46
FR
fig. 2.
fig. 3.
fig. 4
fig. 5
47
FR 1.6 Anomalies
Cause
Solution
Durcissement de la peinture et Chauffez le pole comme dcrit vaporation des rsidus d pendant quelques heures sur la huile. position minimum. Ensuite le faire chauffer au maximum pendant quelques heures. Capacit de chauffage insuffisante. Tirage de la chemine insuffisant. Faites contrler le dgagement de chaleur par votre revendeur. Le tirage dans la chemine doit tre au minimum de 11 pascal. Vrifiez l tanchit de la chemine. Contrlez surtout les clapets de nettoyage qui ne sont pas ferms. Traitez dventuelles fuites laide dun produit dtanchit. Vrifiez ltanchit. Si ncessaire, remplacer les joint de vitre et de porte. Nutilisez que du bois bien sec. Nutilisez que du bois bien sec. Faire chauffer plus fortement le pole avec plusieurs bches, ensuite rglez une puissance plus faible. Vrifiez sil faut ramoner la chemine. Ouvrez une entre d'air extrieure
Combustion de bois trop humide. Les vitres se salissent Combustion de bois trop humide. Utilisation d'une puissance de combustion insuffisante.
Tirage de la chemine trop faible. Aration insuffisante dans la pice causant une dpression.
48
2. Installation
2.1 Prescriptions d installation
Le bon fonctionnement de votre pole est fortement li la qualit de son installation. L'installation doit tre effectue par un professionnel ou une personne qualifie. Cette notice comprend des recommandations propres votre pole. Il est impratif de suivre ces recommandations pour bnficier des meilleures performances mais aussi de la garantie sur cet appareil. Le non respect de ces recommandations annule la garantie.
49
fig.6
fig.7
50
51
3. Donnes technipues
3.1 Plans avec les dimensions KF 198 50 KF 198 53 KF 198 51
KF 198 52
KF 198 55
52
PLUTO PANORAMA
COUNTRY
LUXOR
COUNTRY-H
53
PLUTO RADIANT
PLUTO RONDO
KF 198 56
KF 198 57
54
- Type - Puissance nominale Gaz de combustion: Combustible: - Dbit massique des fumes - Temprature moyenne de fumes - Tirage minimum - Rendement - CO 13% O2
3.2 Dimensions
Art.no. la largeur (mm) la profendeur (mm) laltitude (mm) poids netto poids brutto Art.no. la largeur (mm) la profendeur (mm) laltitude (mm) poids netto poids brutto
001985000 001985004 001985005 001985006 001985009 001985010 001985011 001985012 001985014 001985015 001985020 001985022 001985024 001985026 001985030 001985035 001985038 001985040 001985045 001985048 001985050 001985051 001985052 001985053 001985054 001985055 001985060 001985066 001985070 001985080 001985085 001985100
557 557 557 557 557 557 557 588 557 588 557 588 588 588 557 557 557 851 557 593 557 557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 427 468 468 531 427 435 427 531 531 531 516 516 516 408 468 468 427 427 427 427 427 427 427 427 427 427 427 427
904 904 904 904 904 1057 1057 904 904 904 904 924 924 924 924 904 924 1254 904 1032 904 904 904 904 904 904 904 1022 904 904 904 1022
88 88 88 88 88 85 131 84 93 80 114 96 96 96 151 87 98 112 130 135 123 101 101 101 101 123 88 85 88 101 101 85
98 98 98 98 98 95 141 97 103 92 124 109 109 109 163 99 110 132 140 145 133 111 111 111 111 133 98 100 98 111 111 100
001985101 001985103 001985140 001985160 001985175 001985170 001985185 001985190 001985200 001985201 001985202 001985203 001985204 001985205 001985211 001985221 001985222 001985225 001985241 001985242 001985245 001985252 001985255 001985260 001985300 001985301 001985302 001985304 001985305 001985306 001985307 001985310
557 610 557 557 557 557 610 610 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557
427 452 427 427 427 427 452 452 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427
1022 1050 1022 1022 1022 1022 1050 1050 980 980 980 980 980 980 980 980 980 980 980 980 980 940 940 940 904 904 904 929 904 904 904 924
85 103 118 115 103 85 103 103 86 86 86 86 86 86 112 117 86 124 124 124 89 112 83 83 83 119 88 83 83 131
100 118 133 130 118 100 118 118 88 88 88 101 101 88 114 119 101 126 139 126 104 127 85 85 85 129 90 85 85 133
55
Art.no.
la largeur (mm)
la profendeur (mm)
laltitude (mm)
poids netto
poids brutto
Art.no.
la largeur (mm)
la profendeur (mm)
laltitude (mm)
poids netto
poids brutto
001985340 001985344 001985345 001985346 001985348 001985380 001985500 001985505 001985508 001985520 001985525
557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 468 427 427 427 427 427 427
929 904 904 929 904 904 1023 1023 1023 1023 1023
001985540 001985550 001985610 001985615 001985621 001985701 001985711 001985715 001985721 001985740
557 557 557 557 557 557 557 557 557 557
427 427 492 492 492 516 516 516 516 516
1023 1023 930 930 930 905 929 929 929 905
Notre firme la structure modification entretenir doit, en tant quils levent technique niveau ou ils amliorent le qualit! 3.3 Dclaration de conformit CE
Wamsler Haus- und Kchentechnik GmbH Dclaration de conformit CE Fabricant: Wamsler Haus- und Kchentechnik GmbH, Gutenbergstr. 25, 85748 Garching Dnomination du produit: Chemine Types 198 50 198 51 198 52 198 53 198 54 198 55 198 56 198 57 Les produits ci-dessus indiqus sont en conformit avec les dispositions des directives europennes. 89/106/CEE Directive concernant les produits de btiment La conformit des produits ci-dessus indiqus avec les dispositions des directives numres est atteste par le respect des normes suivantes : EN 13240 : 2005 Munich, le 11-04-2008 Signature officielle Cette dclaration atteste la conformit avec les directives numres, mais elle ne garantit pas les propits des produits. Il faut se rfrer la documentation des produits annexe. Si des modifications sont ralises par des tiers sur les appareils ci -dessus indiques, la prsente dclaration perd sa validit.
ppa.
56
Gentilissimo Cliente, ci complimentiamo con Lei per aver acquistato questa stufa da riscaldamento e per lottima scelta effettuata! Questo prodotto Le garantisce qualit elevata grazie allutilizzo di ottimi materiali testati funzionamento sicuro grazie alle avanzate tecnologie verificate in modo rigoroso in base alla norma europea DIN EN 13240
Per garantire un lungo funzionamento nel tempo della Sua stufa importa nte leggere attentamente le seguenti istruzioni, nelle quali trover tutte le informazioni necessarie oltre che utili suggerimenti. ATTENZIONE Per la richiesta di pezzi di ricambio indicare il N di articolo/Article No. e il N di serie/Serial No. riportati sulla targa di identificazione dellapparecchio.
INDICE
Gentilissimo Cliente .....................................................................................................57 INDICE.........................................................................................................................57 AVVERTENZE DI SICUREZZA ...................................................................................58 1. Istruzioni per luso .................................................................................................61 1.1 Struttura stufa ....................................................................................................61 1.2 Accensione ........................................................................................................62 1.3 Spegnimento .....................................................................................................64 1.4 Generalit sul funzionamento ...........................................................................64 1.5 Pulizia e manutenzione .....................................................................................65 1.6 Cause e risoluzione anomalie ...........................................................................67 2. Installazione ...........................................................................................................68 2.1 Prescrizioni e norme .........................................................................................68 2.2 Distanze di sicurezza ........................................................................................69 2.3 Collegamento alla canna fumaria......................................................................70 3. Schede tecniche ....................................................................................................75 3.2 Informazioni sul peso e dati tecnici ...................................................................78 3.3 Dichiarazione di conformit CE .........................................................................80
57
AVVERTENZE DI SICUREZZA
1.
L apparecchio e i suoi dispositivi sono stati testati sulla base della norma DIN EN 13240 o secondo DIN EN 12815 (vedi targa di identificazione). 2. Per un funzionamento ottimale della Sua stufa fondamentale che la canna fumaria alla quale volete effettuare il collegamento sia in condizioni perfette. Linstallazione e luso delle apparecchiature, deve avvenire esclusivamente in ambiente giudicato idoneo dagli enti preposti e soprattutto in conformit alle norme e prescrizioni vigenti in materia. Gli impianti tecnologici e linstallazione degli apparecchi devono essere effettuati da personale professionalmente qualificato, autorizzato a rilasciare certificato di conformit e rispondenza alle norme in vigore. Nel luogo di installazione devono essere rispettate tutte le leggi, norme e direttive in vigore, in materia di edilizia civile e/o industriale, utilizzando sempre i dispositivi di sicurezza individuale e gli altri mezzi di protezione previsti per legge. Devono inoltre essere rispettate tutte le leggi, norme, direttive in vigore in materia di impiantistica, canne fumarie, elettricit, acqua, ventilazione/aspirazione. 3. Prima di procedere allaccensione dell apparecchio, leggere attentamente tutte le istruzioni per luso e contattare un tecnico specializzato. 4. Per il posizionamento degli apparecchi si consiglia di indossare guanti puliti di cotone per evitare di lasciare impronte digitali difficili da rimuovere in seguito. 5. Per mantenere laria pulita e garantire un funzionamento sicuro dellapparecchio, il carico del combustibile non deve superare le quantit massime indicate nelle istruzioni per luso. Gli sportelli devono inoltre rimanere sempre chiusi per evitare un surriscaldamento che danneggerebbe la stufa. Eventuali danni come quello appena descritto non sono coperti dalla garanzia. 6. Quando lapparecchio in funzione gli sportelli devono sempre rimanere chiusi. 7. Sono ammessi i seguenti combustibili: - ceppi di legna allo stato naturale (lunghezza max 35 cm) - mattonelle di lignite (v. tabella dei combustibili ammessi nelle istruzioni per luso) 8. Non utilizzare combustibili liquidi per laccensione. Utilizzare solo appositi accendi fuoco o bricchetti di legno. 9. vietato bruciare rifiuti, minuzzoli di legna, corteccia, polverino di ca rbone, trucioli, legna umida e trattata con antisettici, carta, cartone e simili.
58
11.
12.
13.
14.
15.
16. 17.
18.
19.
sgradevoli. Provvedere subito ad arieggiare bene il locale (aprire porte e finestre) e riscaldare alla potenza termica nominale massima per almeno un'ora. Se non viene raggiunta la temperatura massima con il primo riscaldamento, questi fenomeni potrebbero ripresentarsi anche in seguito. Gli elementi di comando e i dispositivi di impostazione sono da regolare secondo le istruzioni per luso. Se lapparecchio caldo si raccomanda di servirsi di attrezzi speciali o dei guanti di protezione. Aprendo lo sportello del focolare potrebbe verificarsi unuscita di fumo dovuta ad un utilizzo improprio o ad uno scarso tiraggio della canna fumaria. Si raccomanda pertanto, di aprire lo sportello lentamente e solo di qualche centimetro, prima di aprirlo completamente. Prima di aprire lo sportello per la ricarica di combustibile, assicurarsi che nel focolare vi sia solo il letto di brace e che le fiamme siano tutte spente. Quando la stufa in funzione tutte le superfici, in particolare i vetri, le maniglie e i dispositivi di comando, possono raggiungere temperature elevate. importante controllare che bambini, adolescenti, persone anziane e animali domestici mantengano una distanza di sicurezza dallapparecchio quando questo in funzione. Per manipolare la stufa servirsi del guanto di protezione o degli attrezzi speciali forniti. Bambini e adolescenti al di sotto dei 16 anni possono utilizzare la stufa solo se sorvegliati da adulti. Assicurarsi che il cassetto cenere venga sempre spinto nella sua sede fino al raggiungimento dello scatto e, soprattutto, che non vengano smaltiti tizzoni/braci ardenti (pericolo di incendio). Nei periodi di mezza stagione possono verificarsi anomalie della canna fumaria che possono compromettere la corretta espulsione dei gas combusti. In questo caso opportuno riempire la camera di combustione con una quantit minore di combustibile, meglio se con trucioli o bricchetti di legno. Quindi mettere in funzione la stufa e con attenzione, stabilizzarne il tiraggio. Per un buon funzionamento della stufa la Griglia Focolare deve essere pulita quotidianamente. Dopo ogni accensione stagionale opportuno far ispezionare la stufa da tecnici qualificati ed effettuare una pulizia completa di tubi e giro fumi. Per eventuali riparazioni o sostituzioni contattare tempestivamente il proprio rivenditore avendo cura di comunicare lesatto n di articolo e di serie dellapparecchio. Tutti i componenti dovranno essere sostituiti esclusivamente con pezzi originali Wamsler. Eventuali lavori, in particolare linstallazione, il montaggio, la prima accensione, nonch i servizi di assistenza e di riparazione possono essere eseguiti solo da una ditta specializzata (in impianti di riscaldamento o riscaldamento ad aria). Eventuali installazioni errate faranno decadere ogni forma di garanzia. importante che vengano rispettate le distanze di sicurezza ai lati e sul retro per tutti i componenti e materiali infiammabili. Le distanze sono riportate nelle istruzioni per luso o sulla targa dellapparecchio.
59
21.
22. 23.
24. 25.
Non ammesso il collegamento ad una canna fumaria con altezza utile inferiore ai 4 metri. In caso di incendio della canna fumaria chiudere subito tutte le aperture dellapparecchio e avvertire i Vigili del Fuoco. Non provare in nessun caso a spegnerlo autonomamente. Dopo lincendio assolutamente necessario far ispezionare la canna fumaria da un tecnico specializzato. Poich i combustibili solidi bruciando producono fuliggine, sul vetro della stufa potrebbero formarsi depositi; ci non da considerarsi un difetto dellapparecchio. Essendo la pietra ollare/arenaria pietre naturali, eventuali alterazioni cromatiche sono normali e non costituiscono motivo di reclamo. Lapparecchiatura deve essere impiegata solo per luso per il quale stata esplicitamente concepita, altri impieghi sono impropri e pertanto pericolosi. L apparecchiatura non deve essere utilizzata come inceneritore. In caso di vetro del portello focolare rotto e/o incrinato, cos come in caso di anomalie di funzionamento, lapparecchio non pu essere messo in funzione, se non dopo aver rimosso lanomalia. Non ostruire le aperture o feritoie di aspirazione o di smaltimento del calore. Tutti i regolamenti locali, inclusi quelli riferiti alle Norme Nazionali ed Europee devono essere rispettate nellistallazione dellapparecchio. Il funzionamento dell apparecchio di tipologia intermittente , quindi richiede che il combustibile venga caricato manualmente durante il funzionamento.
60
Fig. 1
61
1.2 Accensione
Combustibili Per garantire un corretto funzionamento della stufa e una formazione minima di fumo devono essere utilizzati esclusivamente i combustibili elencati di seguito: legna secca allo stato naturale con umidit mass ima del 20%.
Tipo di combustibile Legna dura Legna morbida vietato bruciare i seguenti combustibili:
Rifiuti, minuzzoli di legna, corteccia, polverino di carbone, trucioli, legna umida e trattata con antisettici, carta, cartone e simili. Per laccensione utilizzare bricchetti di legno o accendi fuoco da grill. N.B. Per l accensione non utilizzare mai : alcool, benzina, o altri combustibili liquidi. Attenzione! Durante la prima accensione la stufa potrebbe emanare fumi e odori sgradevoli. Provvedere subito ad arieggiare bene il locale (aprire porte e finestre) e riscaldare alla potenza termica nominale massima per almeno unora. Se non viene raggiunta la temperatura massima con la prima accensione, questi fenomeni potrebbero ripresentarsi anche in seguito. Mediante la leva dellaria primaria possibile impostare in continuo i valori compresi nel campo di regolazione per ottenere la potenza calorica desiderata.
62
Impostazione aria di combustione: Le leve devono sempre trovarsi al centro dei simboli. Combustibile Accensione Ceppi di legna Potenza termica nominale Spegnimento
Tabella 1 Quantit di carico orario: Per il legno non superare una quantit di due ceppi (lunghezza max 35 cm) per un carico di circa 1,8 kg. Prima accensione Prima di procedere allaccensione rimuovere il materiale di imballaggio del parafiamma sopra il focolare (fig. 5) ed eventualmente anche il nastro adesivo del vetro senza lasciare residui.
Aprire lo sportello del focolare sollevando la maniglia verso lalto (fig. 2). Se lapparecchio caldo, utilizzare un guanto di protezione isolato. Impostare l aria primaria e la scelta di combustibile (fig. 3) secondo quanto indicato dalla tabella 1. Posizionare sulla griglia focolare bricchetti di legno o accendi fuoco e aggiungervi sopra dei trucioli di legno. Procedere con una piccola carica di legna per poi aumentarne la quantit, accendere, e poi richiudere lo sportello del focolare. Quando la fiamma si ben sviluppata, e si formato un buon strato di brace, aggiungere unulteriore carica di combustibile. In seguito impostare laria primaria secondo quanto indicato dalla tabella 1. Per la prima accensione opportuno procedere in modo lieve con piccole quant it di combustibile, per consentire ai componenti di abituarsi al calore. Durante questa fase la stufa potrebbe emanare fumi e odori sgradevoli. Provvedere subito ad arieggiare bene il locale (aprire porte e finestre) e riscaldare alla potenza termica nominale massima per almeno un'ora. Se non viene raggiunta la temperatura massima con la prima accensione, questi fenomeni potrebbero ripresentarsi anche in seguito.
Il combustibile non deve essere gettato, ma appoggiato nel focolare con delicatezza per evitare di danneggiare la parte in muratura dellapparecchio.
63
Attenzione! Aprendo lo sportello del focolare potrebbe verificarsi unuscita di fumo dovut a ad un utilizzo improprio o ad uno scarso tiraggio della canna fumaria. Si raccomanda pertanto di aprire lo sportello lentamente, e solo di qualche centimetro, prima di aprirlo completamente. Prima di aprire lo sportello per la ricarica di combustibile, assicurarsi che nel focolare vi sia solo il letto di brace e che le fiamme siano tutte spente.
1.3 Spegnimento
Chiudere gli sportelli e portare la regolazione dellaria primaria in posizione chi usa. Lasciar consumare la brace rimasta e far raffreddare la stufa. Pulire e svuotare il focolare e il cassetto cenere solo quando la stufa si raffreddata a temperatura ambiente! Raccomandiamo di far attenzione alla possibile presenza di braci o tizzoni caldi.
Attenzione! Per garantire aria pulita e una buona resa dellapparecchio, il carico del combustibile non deve superare le quantit max indicate nelle istruzioni per luso per evitare un surriscaldamento che danneggerebbe la stufa. Eventuali danni come quello appena descritto non sono coperti dalla garanzia. Una minore resa
64
termica si ottiene soltanto riducendo le quantit di carico e non mediante diminuzione dellaria primaria.
65
Eventuali lavori, in particolare linstallazione, il montaggio, la prima accensione, nonch i servizi di assistenza e di riparazione possono essere eseguiti solo da una ditta specializzata (in impianti di riscaldamento o riscaldamento ad aria). Eventuali installazioni errate faranno decadere ogni forma di garanzia.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Formazione di odori: Asciugatura della vernice utilizzata ed evaporazione dei residui di olio.
Sportelli vetro, focolare o cenere non ermetici Combustione di legna troppo umida
Provvedimenti da attuare in caso di incendio di canna fumaria Una pulizia non completa della canna fumaria, lutilizzo di combustibile non idoneo (per esempio legna troppo umida) o limpostazione sbagliata dellaria della combustione potrebbero provocare un incendio della canna fumaria. In questo caso chiudere la presa daria della stufa e chiamare immediatamente i Vigili del Fuoco.
67
2. Installazione
2.1 Prescrizioni e norme
Leggere attentamente il contenuto del presente manuale, in quanto fornisce importanti indicazioni ed istruzioni riguardanti linstallazione, luso, la manutenzione e soprattutto la sicurezza del prodotto. Linstallazione e luso delle apparecchiature, deve avvenire esclusivamente in ambiente giudicato idoneo dagli enti preposti e soprattutto in conformit alle norme e prescrizioni vigenti in materia. Gli impianti tecnologici e linstallazione degli apparecchi devono essere effettuati da personale professionalmente qualificato, autorizzato a rilasciare certificato di conformit e rispondenza alle norme in vigore. Nel luogo di installazione devono essere rispettate tutte le leggi, norme e direttive in vigore, in materia di edilizia civile e/o industriale, utilizzando sempre i dispositivi di sicurezza individuale e gli altri mezzi di protezione previsti per legge. Devono inoltre essere rispettate tutte le leggi, norme, direttive in vigore in materia di impiantistica, canne fumarie, elettricit, acqua, ventilazione/aspirazione. Il costruttore declina ogni responsabilit derivante da installazione errata, manomissione, utilizzo non corretto dellapparecchio , uso improprio, cattiva manutenzione, inosservanza delle normative vigenti e imperizia duso.
Operazioni preliminari Togliere delicatamente limballo. Il materiale che compone limballo va riciclato mettendolo negli appositi contenitori o conferito al sito preposto nel comune di residenza. Prima dellinstallazione assicurasi dellintegrit dellapparecchio, in caso di dubbio non utilizzarlo e rivolgersi al rivenditore. Posizionamento apparecchio Il sito dinstallazione dellapparecchio deve prevedere: Una pavimentazione di adeguata capacit di carico, superiore al peso dellapparecchio. Se la costruzione esistente non soddisfa questo requisito, misure appropriate dovranno essere prese (Es. piastra di distribuzione di carico). Una pavimentazione adatta allirraggiamento calorico che garantisca l edificio contro i rischi di incendio. L installazione dell apparecchio deve garantire facile accesso per la pulizia dellapparecchio stesso, dei condotti dei gas di scarico e della canna fumaria.
68
Fig. 6
Pavimento sotto e davanti alla stufa
Fig. 7
I pavimenti in materiale infiammabile come moquette, parquet o sughero devono essere sostituiti o protetti sotto la stufa, davanti fino a 50 cm dal bordo del focolare e lateralmente fino a 30 cm da un rivestimento in materiale non infiammabile, come ceramica, pietra, vetro o da una base salva-pavimento in acciaio.
69
ATTENZIONE!
Per il dimensionamento della canna fumaria consultare i dati relativi all apparecchio nella sezione 3.
Generalmente la stufa pu essere collegata direttamente alla canna fumaria mediante impiego di curve.
Se il tiraggio scarso la stufa dovrebbe essere collegata alla canna fumaria mediante un tubo di scarico fumi verticale.
70
CAMINO O CANNA FUMARIA Il camino o canna fumaria deve rispondere ai seguenti requisiti: Essere a tenuta dei prodotti della combustione, impermeabile ed adeguatamente isolato e coibentato alla stregua delle condizioni di impiego (UNI 9615); Essere realizzato in materiali adatti a resistere alle normali sollecitazioni meccaniche, al calore, allazione dei prodotti della combustione e alle eventuali condense; Avere andamento prevalentemente verticale con devia zioni dellasse non superiori a 45; Essere adeguatamente distanziato da materiali combustibili o infiammabili mediante intercapedine daria od opportuno isolante; Avere sezione interna preferibilmente circolare; le sezioni quadrate o rettangolari devono avere angoli arrotondati con raggio non inferiore a 20 mm; Avere sezione interna costante, libera e indipendente; Avere le sezioni rettangolari con rapporto massimo tra i lati di 1,5; Dovranno essere rispettate le indicazioni del costruttore dellapparecchi o per quanto concerne la sezione e le caratteristiche costruttive della canna fumaria/camino. Per sezioni particolari, variazioni di sezione o di percorso dovr essere effettuata una verifica del funzionamento del sistema di evacuazione fumi con appropriato metodo di calcolo fluidodinamico (UNI 9615). E consigliato che il condotto fumario sia dotato di una camera per raccolta materiali solidi ed eventuali condense, situata sotto limbocco del canale da fumo, in modo da essere facilmente apribile ed ispezionabile da sportello a tenuta daria. In caso di incendio della canna fumaria munirsi di adeguati sistemi per soffocare le fiamme (es. utilizzare un estintore a polvere o ad anidride carbonica) e richiedere l'intervento dei Vigili del Fuoco.
COLLEGAMENTO DELLAPPARECCHIO ALLA CANNA FUMARIA ED EVACUAZIONE DEI PRODOTTI DELLA COMBUSTIONE (vedi anche normativa UNI 10683) Il collegamento tra lapparecchio di utilizzazione e la canna fumaria deve ricevere lo scarico da un solo generatore di calore. E ammessa la realizzazione di apparecchio composto da caminetto e forno di cottura con un unico punto di scarico verso il camino, per il quale il costruttore dovr fornire le caratteristiche costruttive del raccordo dei canali da fumo. E vietato convogliare nello stesso canale da fumo lo scarico proveniente da cappe sovrastanti gli apparecchi di cottura. E vietato lo scarico diretto verso spazi chiusi anche se a cielo libero.
71
Lo scarico diretto dei prodotti della combustione deve essere previsto a tetto ed il condotto fumario deve avere le caratteristiche previste precedentemente.
COMIGNOLO Il comignolo deve rispondere ai seguenti requisiti: Avere sezione interna equivalente a quella del camino; Avere sezione utile di uscita non inferiore al doppio di quella interna del camino; Essere costruito in modo da impedire la penetrazione nel camino di pioggia, neve, corpi estranei e in modo che anche in caso di venti di ogni direzione e inclinazione sia comunque assicurato lo scarico dei prodotti della combustione; Essere posizionato in modo da garantire una adeguata dispersione e diluizione dei prodotti della combustione e comunque al di fuori della zona di reflusso in cui favorita la formazione di contropressioni. Tale zona ha dimensioni e conformazioni diverse in funzione dellangolo di inclinazione della copertura, per cui risulta necessario adottare le altezze minime indicate negli schemi seguenti:
72
REALIZZAZIONE DELLALLACCIAMENTO ALLA CANNA FUMARIA Eseguire il collegamento dellapparecchio alla canna fumaria del camino esistente, assicurandosi che il tubo di uscita fumi non occupi la sezione libera della canna fumaria. Utilizzare esclusivamente tubi adatti allo smaltimento dei fumi della combustione. Limitare i tratti orizzontali del condotto di raccordo alla canna fumaria (max 1 metro) e luso di curve.
73
PRESA ARIA COMBUSTIONE DALLAMBIENTE DI INSTALLAZIONE Lapparecchio deve poter disporre dellaria necessaria a garantirne il regol are funzionamento mediante prese daria esterna. Le prese daria devono rispondere ai seguenti requisiti: a) Avere sezione libera totale minima di 200 cm; b) Essere comunicanti direttamente con lambiente di installazione; c) Essere protette con griglia, rete metallica o idonea protezione purch non riduca la sezione minima di cui al punto a) e posizionate in modo da evitare che possano essere ostruite. Lafflusso dellaria pu essere ottenuto anche da un locale adiacente a quello di installazione, purch tale flusso possa avvenire liberamente attraverso aperture permanenti comunicanti con lesterno. Il locale adiacente rispetto a quello di installazione non deve essere messo in depressione rispetto allambiente esterno per effetto del tiraggio contrario, provocato dalla presenza in tale locale di altro apparecchio di utilizzazione o di dispositivo di aspirazione. Nel locale adiacente le aperture permanenti devono rispondere ai requisiti di cui alle lettere a) e c). Il locale adiacente non pu essere adibito ad autorimessa, magazzino di materiale combustibile n comunque ad attivit con pericolo dincendio.
NOTA : Ventilatori di estrazione aria, quando usati nella stessa stanza o spazi vicini dellapparecchio, potrebbero causare problemi di funzionamento. NOTA : Il locale di installazione non deve essere messo in depressione da apparecchiature quali ad esempio: cappe di aspirazione,camini, canne fumarie,ecc.., presenti nel locale stesso o nei locali adiacenti posti in comunicazione.
74
3. Schede tecniche
3.1 Disegni dimensionali e dati KF 198 50 KF 198 53 KF 198 51
KF 198 52
KF 198 55
75
PLUTO PANORAMA
COUNTRY
LUXOR
COUNTRY-H
76
PLUTO RADIANT
PLUTO RONDO
KF 198 56
KF 198 57
77
Tipo Potenza nominale termica Volume riscaldabile per utilizzo non continuo in m - in condizioni favorevoli, - normali e - poco favorevoli secondo DIN 18893/TAB. 2 Valori delle emissioni per combustibile: Portata fumi: Temperatura dei fumi: Depressione minima con rendimento nominale Polveri (in riferimento ad un tenore O2 del 13 %) CO (in riferimento ad un tenore O2 del 13 %) Rendimento
198 50/51/52/53/55/56/57 6,5 kW 132 78 52 ceppi 6 g/s 300 C 11 Pa < 40 mg/m 0,12 % > 78%
001985000 001985004 001985005 001985006 001985009 001985010 001985011 001985012 001985014 001985015 001985020 001985022 001985024 001985026 001985030 001985035 001985038 001985040 001985045 001985048 001985050 001985051 001985052 001985053 001985054 001985055 001985060 001985066 001985070 001985080 001985085 001985100
557 557 557 557 557 557 557 588 557 588 557 588 588 588 557 557 557 851 557 593 557 557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 427 468 468 531 427 435 427 531 531 531 516 516 516 408 468 468 427 427 427 427 427 427 427 427 427 427 427 427
904 904 904 904 904 1057 1057 904 904 904 904 924 924 924 924 904 924 1254 904 1032 904 904 904 904 904 904 904 1022 904 904 904 1022
88 88 88 88 88 85 131 84 93 80 114 96 96 96 151 87 98 112 130 135 123 101 101 101 101 123 88 85 88 101 101 85
98 98 98 98 98 95 141 97 103 92 124 109 109 109 163 99 110 132 140 145 133 111 111 111 111 133 98 100 98 111 111 100
001985101 001985103 001985140 001985160 001985175 001985170 001985185 001985190 001985200 001985201 001985202 001985203 001985204 001985205 001985211 001985221 001985222 001985225 001985241 001985242 001985245 001985252 001985255 001985260 001985300 001985301 001985302 001985304 001985305 001985306 001985307 001985310
557 610 557 557 557 557 610 610 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557
427 452 427 427 427 427 452 452 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427
1022 1050 1022 1022 1022 1022 1050 1050 980 980 980 980 980 980 980 980 980 980 980 980 980 940 940 940 904 904 904 929 904 904 904 924
85 103 118 115 103 85 103 103 86 86 86 86 86 86 112 117 86 124 124 124 89 112 83 83 83 119 88 83 83 131
100 118 133 130 118 100 118 118 88 88 88 101 101 88 114 119 101 126 139 126 104 127 85 85 85 129 90 85 85 133
78
N art.
Altezza (mm)
N art.
Profond it (mm)
Altezza (mm)
001985340 001985344 001985345 001985346 001985348 001985380 001985500 001985505 001985508 001985520 001985525
557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 468 427 427 427 427 427 427
929 904 904 929 904 904 1023 1023 1023 1023 1023
001985540 001985550 001985610 001985615 001985621 001985701 001985711 001985715 001985721 001985740
557 557 557 557 557 557 557 557 557 557
427 427 492 492 492 516 516 516 516 516
1023 1023 930 930 930 905 929 929 929 905
Questi dati relativi alle dimensioni sono indicati a solo scopo informativo! Ci riserviamo il diritto di apportare eventuali modifiche strutturali a vantaggio del progresso tecnologico o del miglioramento qualitativo!
79
Si dichiara con la presente che i prodotti di cui sopra risultano in conformit a quanto previsto dalle seguenti direttive comunitarie: 89/106/CEE: Direttiva prodotti da costruzione La conformit dei prodotti elencati alle normative delle direttive summenzionate viene comprovata dal rispetto delle seguenti norme: EN 13240: 2005
Questa dichiarazione certifica la conformit alle direttive summenzionate, ma non contiene alcuna garanzia delle propriet del prodotto. opportuno consultare le avvertenze di sicurezza allegate alle istruzioni del prodotto. Questa dichiarazione perde validit nel caso in cui gli apparecchi descritti sopra vengano modificati da parte di terzi.
Ci riserviamo il diritto di apportare modifiche a vantaggio del progresso tecnologico e/o del miglioramento qualitativo. Non ci assumiamo nessuna responsabilit per eventuali errori di battitura o modifiche successive alla messa in stampa.
80
Elsz
Tisztelt Vsrl!
HU
Ksznjk megtisztel bizalmt, hogy termknket vlasztotta! Ezen termk megvsrlsval n garancit kap: a legjobb s mr bevlt anyagok felhasznlsval a j minsgre a mkdsi biztonsgra, amelyet a nmet s eurpai normk szerint elle nriznek (Megfelel a DIN 18891, ptsi alak 1, valamint EN 13240 szabvnyoknak.) a robosztus felpts ltal biztostott hossz lettartamra. Azrt, hogy valban hossz ideig rmt lelje az j kandalljban, t kell tanu lmnyoznia a kvetkez hasznlati tmutatt. Ebben megtall minden tudnivalt, valamint nhny kiegszt tippet. FIGYELEM! A tpustbln feltntetett cikkszmot s gyrtsi szmot a ptalkatrsz rendelsnl meg kell adni!
Tartalomjegyzk
Elsz ..........................................................................................................................81 Tartalomjegyzk ..........................................................................................................81 BIZTONSGI ELRSOK .........................................................................................82 1. Hasznlat ................................................................................................................84 1.1 A kandall felptse .........................................................................................84 1.2 zembe helyezs ..............................................................................................85 1.3 zemen kvl-helyezs .....................................................................................86 1.4 Ftsi tmutatsok ............................................................................................86 1.5 Tisztts s gondozs .......................................................................................87 1.6 zemzavar-okok,elhrtsuk .............................................................................89 2. Elhelyezs ..............................................................................................................90 2.1 Elrsok ...........................................................................................................90 2.2 Elhelyezsi helysg ...........................................................................................90 2.3 Tvolsgok ........................................................................................................90 2.4 Kmnycsatlakozs ..........................................................................................91 3. Mszaki adatok ......................................................................................................93 3.1 Mretrajz ...........................................................................................................93 3.2 EK Konformits-nyilatkozat ...............................................................................97
81
HU BIZTONSGI ELRSOK
1. A kszlkek a DIN EN 13240 vagy a DIN EN 12815 norma alapjn bevizsglsra kerltek (kszlk tpust meghatroz tbla). 2. A belltshoz s a kmnycsatlakoztatshoz az adott orszg tzvdem i rendelkezseit kell betartani. A kszlk tkletes mkdshez a kmnynek, amelyre a kszlket csatlakoztatni akarja, tkletes llapotban kell lennie. 3. Az els zembe helyezs s a kmnycsatlakoztats eltt a hasznlati tmutatt alaposan t kell olvasni, s az illetkes kmnyseprt tjko ztatni kell. 4. Ajnlatos a kszlk belltsakor tiszta pamutkesztyt hasznlni, hogy a ksbb nehezen eltntethet ujjlenyomatokat elkerljk. 5. A leveg tisztn tartsa s a kszlk rdekben a hasznlati tmutatban megadott maximlis tzelanyag-mennyisget nem szabad tllpni s a kszlk ajtajait zrva kell tartani, klnben fennll a tlfts veszlye, amely a kszlk krosodshoz vezethet. Az ilyen tpus krok esetn nem vllalunk garancit. 6. A kszlk ajtajainak mkds kzben mindig zrva kell lennik. 7. Engedlyezett tzelanyagok: - termszetes faanyag (max. 35 cm hosszsgban) - esetlegesen barnaszn-brikett (ld. hasznlati utasts) 8. Ne hasznljon folykony gyjtanyagot. A tz meggyjtshoz specilis gyjtanyagot vagy szraz gyjtst lehet hasznlni. 9. Hulladk, szntrmelk, forgcslapmaradkok, nedves s favd sze rrel kezelt fa, papr s karton vagy hasonlk getse tilos. 10. Az els begyjtsnl fst s kellemetlen szagok kpzdhetnek. Felttl enl gondoskodjon a helyisg megfelel szellzsrl (ablakok s ajtk nyitsa), s legalbb egy rn t a maximlis nvleges ftrtken ftsn. Amennyiben az els ftsnl nem ri el a maximlis hmrskletet, gy ezek a jelensgek ksbb is fellphetnek. 11. A kezelsi elemeket s a bellt egysgeket a hasznlati tmutatban lertaknak megfelelen kell belltani. Amennyiben a kszlk felf orrsodott, a kezelshez hasznlja a segdeszkzket vagy vdkesztyt. 12. A tzelajt nyitsakor, vagy elgtelen kmnyhuzat esetn fst keletkezhet. Felttlenl gyeljen arra, hogy a tzelajtt csak lassan szabad kinyitni, elszr csak rsnyire, majd nhny msodperc mlva teljesen. Ezen kvl, ha tovbbi tzelanyagot akar a tzre tenni, az ajt k inyitsa eltt mr csak a parzsgy lehet az gstrben, azaz nem sz abad, hogy lngok legyenek lthatk. 13. Ft zemmdban a felletek, a betekint ablakok s a fogk nagyon felforrsodhatnak. Figyelmeztesse a gyermekeket ezekre, a veszlyekre s a fts idejre tartsa ket tvol a kandalltl.
82
14. gyeljen r, hogy a hamulda mindig tkzsig be legyen tolva, s klnsen gyeljen arra, hogy a forr hamut soha ne vegye ki (tzveszly). 15. Az tmeneti idszakban a kmnyhuzat cskkenhet, melynek kvetke ztben a termeld gzok elszvsa nem tkletes. Ilyenkor a kandallt egy kisebb tzelsi mennyisggel, lehetleg faforgccsal vagy szraz gyjtssal kell megtlteni, ellenrzs mellett bezemelni, s ezzel a kmnyhuzatot stabilizlni. A rostly legyen mindig tiszta. 16. Minden ftsi szezon utn rdemes a berendezst szakemberrel tnzetni. Szintn ajnlatos alaposan kitiszttani a tvoz fstgzok tjt s a csveket is. 17. Ha javtsokat vagy feljtsokat kell vgezni, krjk idben, forduljon szakszervizhez, a pontos cikkszm s gyrtsi szm megadsval. Csak eredeti Wamsler alkatrszeket szabad hasznlni. 18. A szilrd tzels kszlk, az gshez szksges levegt, az azt krlvev helyisgbl vonja el. Ez abban az esetben biztostott, ha 1 kW n vleges ftrtkre 4 lgkbmter trfogat esik. Amennyiben ez a trfogat kisebb, gy szellznylsok segtsgvel az gshez leveg2 sszekttets teremthet ms helyisgekkel (min. 150cm ). 19. gyeljen az ghet alkatrszektl s anyagoktl val oldal - s hts irny tvolsgok betartsra. Ezeket, a tvolsgokat megtallja a kezelsi tmutatban vagy a tpustbln. 20. A kszlket tilos talaktani. 21. Tilos olyan kmnyre csatlakoztatni, melynek hat magassga 5 mternl alacsonyabb. A kszlk csatlakoztatsra kivlasztott kmn yre legfeljebb kt msik kszlk csatlakoztathat. 22. Kmnytz esetn azonnal zrjon be minden nylst a berendezsen, s rtestse a tzoltkat. Semmikpp ne prblkozzon a tz eloltsval. Ezutn felttlenl ellenriztesse a kmnyt szakembe rrel.
83
1. Hasznlat
1.1 A kandall felptse
Fstcscsonk Trolrsz
Primer levegszablyz
84
Tltsi mennyisgek: Hasbfa: max. hossz.: 35 cm max. 2 hasb tltsenknt kb. 1,8 kg Fabrikett: 1,4 kg Levegszablyoz-bellts: A primer levegszablyz gombnak mindig a jells kzepnl kell lennie. Tzelanyag Fa Fa Nvleges htelj. Felfts, begyjts 1.tblzat
TILOS krnyezetszennyez anyagok elgetse a kszlkben! A begyjtshoz vkony szraz gyjtst, faforgcsot, vagy grillbegyjtt kell felhasznlni, de semmi ese tben sem szabad folykony anyagot! ELS BEGYJTS zembe helyezs eltt a szlltsi biztostt a fels tztr falazattl, a tztren t el kell tvoltani (6. kp). Figyelem! Az els begyjtsnl fst s kellemetlen szagok kpzdhetnek. Fe lttlenl gondoskodjon a helyisg megfelel szellzsrl (ablakok s ajtk nyitsa), s legalbb egy rn t a maximlis nvleges ftteljestmnyen ftsn. Amennyiben az els ftsnl nem ri el a maximlis hmrskletet, gy ezek a jelensgek ksbb is fellphetnek mg.
Primerlevegszablyz llsa H A
85
zembehelyezs eltt a szlltsi biztostt a fels tztr falazattl, a tztren t el kell tvoltani (5. kp). Az ajtt a foganty emelsvel kinyitni (2.kp). ( Forr kszlknl ehhez egy hll keszty hasznlhat ! ) A primerlevegszablyozt (3.kp) az 1. tblzatnak megfelelen belltani, (Alls ). Helyezzen gyjtst vagy faforgcsot a rostlyra helyezni. Erre elszr kisebb, majd nagyobb ft rakni, meggyjtani s az ajtt ismt bezrni. Ha a fa lnken g s kielgt parzs kpzdtt, jbl tzelanyagot kell rrakni. Ezutn a prim.lev.szablyozt (3.kp) az 2. tblzatnak megfelelen be kell lltani,( Hlls ) Az els felfts legyen enyhe lefolys, csekly tzelanyag mennyisggel, hogy a kandalln a lakkrteg begjen. A szagkpzds az els begyjtsnl teljesen normlis, de szellztets szksges.
86
egyrtelmen szvja befel, akkor a kmnyhuzat nem megfelel. Ennek kikszblshez a kandallban, vagy a kmny tiszttnylsban rvid ideig faforgcsot kell meggyjtani. A rostlyt minden begyjts eltt ki kell tiszttani, hogy j levegra mlst biztostsunk az gshez. A hamuldt rendszeresen rteni kell (4. kp). g yeljen arra, hogy a hamulda mindig tkzsig be legyen tolva. Figyelem! A leveg tisztasga s a kandall rdekben ne lpje tl a megadott maximlis tzelanyag-mennyisgeket, klnben fennll a tlhevls veszlye, amely a kszlk krosodshoz vezethet. Az ilyen tpus krok esetn nem vllalunk garancit. A kandallknl csak egyrteg tzelanyag -bekszts megengedett. Alacsonyabb hteljestmnyt csak a tzelanyag mennyisgnek cskkentsvel, s ne az elsdleges leveg cskkentsvel prbljon elrni.
87
2.kp
3.kp
4.kp
5.kp
88
1.6 zemzavar-okok,elhrtsuk
zemzavar fajtja Lehetsges okai: A felhasznlt vdfestk kikemnyedse Olajmaradkok kigzlgse Elhrts: A kandallt a hasznlati utasts szerint tbb rn t kis fokozaton zemeltetni. Ezek utn tbb rra, maximlis teljestmnyre felfteni. Szakemberrel vizsgltassuk meg az n hsszksglett. A kmny huzatnak min.10 Pa-nak kell lennie. Ellenrizze a kmnynek a tmtettsgt, s hogy ms, ehhez a kmnyhez csatlakoz tzhelyek ajtajai tmtetten (jl) zrdnak. Mindenek eltt gyeljen a tmtetlen kmnytisztt becsatlakozsokra. Az sszes fstcsktsnek jl tmtettnek s tzllnak-szigeteltnek kell lennie. Tmtst ellenrizni, az ajtt jl bezrni. Esetlegesen a tmt zsinrt kicserlni. Csak jl kiszrtott ft alkalmazzunk.
Szagkpzds:
Tl csekly a kmnyhuzat
Teendk kmnytz esetn A kmny nem megfelel tiszttsa esetn, nem megfelel tzelanyag (pl. tl nedves fa) vagy nem megfelel gsi leveg-bellts esetn kmnytz keletkezhet. Ebben az esetben zrja el a kszlknl a gsi levegt s azonnal hvja a tzoltkat. A vz hasznlata az oltshoz tilos!
89
2. Elhelyezs
2.1 Elrsok
Az elhelyezsnl s a fstcsoldali becsatlakoztatsnl az egyes vonatkoz ptsi rendelkezsek tzvdelmi kvetelmnyeit kell figyelembe venni. Az n kandalljnak kifogstalan mkdse rdekben a kmnynek, amibe a kszlkt akarja becsatlakoztatni, kifogstalan llapotban kell lennie.
2.3 Tvolsgok
Minden ghet berendezst, btort, vagy pl. dekoranyagokat is a kandall kz vetlen krnyezetben a hhatstl vdeni kell. Berendezsi trgyak a sugrzsi tartomnyban A kandall sugrzsi tartomnyban 80 cm min. tvolsgot (A) kell betartani, az ghet berendezsek, btorok, vagy pl. dekoranyagok s a kandall ellapja kztt. A biztonsgi tvolsg 40 cm-re cskkenhet, ha egy sugrzsvd kerl a vdend trgy el. (B) (lsd a 6.kp). Berendezsi trgyak a sugrzsi tartomnyon kvl A kszlk mgtti s melletti falak nem kszlhetnek ghet anyagokbl, vagy nem lehetnek ilyen anyaqgokkal ( bevonva ) burkolva, hacsak a kszlk s a fal kztti tvolsg nincs oldalt 30 cm s htul 20 cm. A fa- s manyag-btorok esetn hasonlan 30 cm oldaltvolsgot kell betartani, (lsd a 7.kp).
6. kp
7. kp
90
A kandall alatti padlzat Az ghet anyagokbl kszlt padlt, mint pl. sznyeg, parketta, vagy parafa, a ka ndall alatt, valamint a tztr eltt 50 cm-re s oldalt 30 cm-re egy nem ghet anyagbl kszlt burkolval kell vdeni, mint pl.: kermia-, k-, veg-padl, vagy fm.
2.4 Kmnycsatlakozs
Figyelem ! A kszlk csatlakoztatsa eltt minden esetben az illetkes kmnysepr mester hozzjrulst kell krni. Az sszekt- s bektsi elemeknek mind a kszlkhez, mind pedig egym shoz jl tmtve s tartsan kell csatlakozniuk. A fstcs nem nylhat be a kmny szabad keresztmetszetbe. A kmny s a kandall kztti sszektelemnek ugyanolyan keresztmetszetnek kell lennie, mint a kandall cscsonkja. Azok a csvek, amelyek nem hvdettek, vagy nem fgglegesen vezetnek, 1 m tl ne legyenek hosszabak. Azoknak a vzszintes cscsatlakoz elemeknek, amelyek 0,5 m -nl hosszabbak,10 fokos emelkedssel kell csatlakozniuk a kandallhoz. A kandall bektelemeinek az ghet anyagoktl min. 40 cm -es tvolsgot kell betartani. Ha az sszekt elemek egy min. 2 cm vastagsg, nem ghet burkolattal vannak elltva, akkor azoknak az gh et anyagoktl val tvolsg min. 10 cm lehet. Az sszektelemeket, amennyiben ghet anyagokbl kszlt berendezseken vezetnek keresztl 1. min. 20 cm-es tvolsgban nem ghet anyagbl kszlt, vdcsvel kell elltni, vagy 2. min. 20 cm-es krzetben nem ghet anyaggal kell burkolni. Kisebb tvolsgok akkor engedlyezhetk, ha a kandall nvleges teljestmnyen val zemelskor, az ghet anyagokbl ksz lt berendezseken a hmrsklet nem tbb mint 85C. Figyelem ! Az olyan kmnycsatlakozs nem megengedhet, ahol a kmny toldsok hossza 5 m-tl kevesebb ( lsd a kmnyszmtsok adatait az 99. oldalon). A kandall csatlakozshoz tervbe vett kmnyhez maximum 2 tovbbi kszlk kthet be.
Rendszerint egy vvel csatlakoztathat a kandall a kmnyhez.
91
min.50cm min.5m
min.30cm
Fals leveg tmtetlen cscsatlakozs miatt. Hamis leveg beramlsa nyitott vagy tmtetlen kmnytisztt ajtn keresztl.
92
5m alatt
A tetgerincnl alacsonyabb
Helyes
Helytelen
3. Mszaki adatok
3.1 Mretrajz KF 198 50 KF 198 53 KF 198 51
KF 198 52
KF 198 55
93
LUXOR
COUNTRY-H
94
KF 198 56
KF 198 57
95
Tpus Nvleges teljestmny 18893/TAB 2 DIN szabvny szerinti ftkpessg m -kedvez -kevsb kedvez -kedveztlen ftsi feltteleknl -fstgzrtkek: Ftanyag: -fstgzramls -fstgzhmrsklet -a nvleges teljestmnyhez szksges huzatnyoms:
Ksztermkkd
Szl. (mm)
Mlys. (mm)
Mag. (mm)
Ksztermkkd
Szl. (mm)
Mlys. (mm)
Mag. (mm)
001985000 001985004 001985005 001985006 001985009 001985010 001985011 001985012 001985014 001985015 001985020 001985022 001985024 001985026 001985030 001985035 001985038 001985040 001985045 001985048 001985050 001985051 001985052 001985053 001985054 001985055 001985060 001985066 001985070 001985080 001985085 001985100
557 557 557 557 557 557 557 588 557 588 557 588 588 588 557 557 557 851 557 593 557 557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 427 468 468 531 427 435 427 531 531 531 516 516 516 408 468 468 427 427 427 427 427 427 427 427 427 427 427 427
904 904 904 904 904 1057 1057 904 904 904 904 924 924 924 924 904 924 1254 904 1032 904 904 904 904 904 904 904 1022 904 904 904 1022
88 88 88 88 88 85 131 84 93 80 114 96 96 96 151 87 98 112 130 135 123 101 101 101 101 123 88 85 88 101 101 85
98 98 98 98 98 95 141 97 103 92 124 109 109 109 163 99 110 132 140 145 133 111 111 111 111 133 98 100 98 111 111 100
001985101 001985103 001985140 001985160 001985175 001985170 001985185 001985190 001985200 001985201 001985202 001985203 001985204 001985205 001985211 001985221 001985222 001985225 001985241 001985242 001985245 001985252 001985255 001985260 001985300 001985301 001985302 001985304 001985305 001985306 001985307 001985310
557 610 557 557 557 557 610 610 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557 557
427 452 427 427 427 427 452 452 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427 427
1022 1050 1022 1022 1022 1022 1050 1050 980 980 980 980 980 980 980 980 980 980 980 980 980 940 940 940 904 904 904 929 904 904 904 924
85 103 118 115 103 85 103 103 86 86 86 86 86 86 112 117 86 124 124 124 89 112 83 83 83 119 88 83 83 131
100 118 133 130 118 100 118 118 88 88 88 101 101 88 114 119 101 126 139 126 104 127 85 85 85 129 90 85 85 133
96
HU
Sly netto (Kg) Sly brutto (Kg) Sly netto (Kg) Sly brutto (Kg)
Ksztermkkd
Szl. (mm)
Mlys. (mm)
Mag. (mm)
Ksztermkkd
Szl. (mm)
Mlys. (mm)
Mag. (mm)
001985340 001985344 001985345 001985346 001985348 001985380 001985500 001985505 001985508 001985520 001985525
557 557 557 557 557 557 557 557 557 557 557
427 427 427 427 468 427 427 427 427 427 427
929 904 904 929 904 904 1023 1023 1023 1023 1023
001985540 001985550 001985610 001985615 001985621 001985701 001985711 001985715 001985721 001985740
557 557 557 557 557 557 557 557 557 557
427 427 492 492 492 516 516 516 516 516
1023 1023 930 930 930 905 929 929 929 905
A feltntetett mret s slyadatok tjkoztat jellegek! Cgnk a konstrukci mdostsnak jogt fenntartja, amennyiben ezek a mszaki sznvonalat emelik vagy a minsget javtjk!
3.2 EK Konformits-nyilatkozat
Kszlt: 2008.08.
97