Académique Documents
Professionnel Documents
Culture Documents
What is salt? Salt is an ionic compound formed when the hydrogen ion, H+ from acid is replaced by a metal ion or ammonium ion, NH4+
In the preparation of salts, we must identify the type of salt. This can be done by analysing the cations and the anions that are present in salts.
Two types of salts Soluble salt salts that can be dissolve in water at room temperature Insoluble salt salts cannot be dissolve in water at room temperature Solubility in water All dissolves in water
Type of salt Sodium salts Potassium salts Ammonium salts Nitrate salts
All dissolves in water All dissolves in water, Except: Lead(II) chloride, Silver chloride, Mercury chloride, Except: Lead(II) sulphate, Barium sulfat, Calcium sulfat, PbCl2 AgCl HgCl PbSO4 BaSO4 CaSO4
Carbonate salts
All did not dissolves in water, Except: Sodium carbonate, Na2CO3 Potassium carbonate, K2CO3 Ammonium carbonate, (NH4)2CO3
Special Properties of lead(II) chloride and lead(II) iodide NOTES: Lead halide such as lead(II) chloride (PbCl2), lead(II) bromide (PbBr2), and lead(II) iodide (PbI2) did not dissolve in cold water but dissolve in hot water.
Use of salts; Item Flavor Food preparation Preservatives Baking powder Agriculture Nitrogen fertilizers Pesticide Reduce stomach acidic (gastric) Sniff salt (fainted) Plaster of Paris (cement to support broken bone) Use Example Monosodium glutamate (MSG) Sodium chloride Sodium chloride - salted fish Sodium benzoate - sauce Sodium nitrite - processed meat, burger Sodium hydrogen carbonate Potassium nitrate Sodium nitrate Copper(II) sulphate Iron(II) sulphate Calcium carbonate Calcium hydrogen carbonate Ammonium carbonate Calcium sulphate
Medicine
A. Preparation of Salt
The procedure of preparation salt depends to the type of salt.
a. Insoluble salt is prepared through precipitation reaction. b. Soluble salt is prepared by one of these reactions; i. Acid and alkali ii. Acid and metal oxide iii. Acid and metal carbonate iv. Acid and reactive metal
Na+ NO3-
Na+ NO3-
Na+ ions and NO3- ions do not take part in the reaction and are free to move in the solution
PbCl2
Chemical and ionic equations Chemical equation : MX(aq) + solution M+(aq) + NY(aq) MY(s) + solution precipitate Y-(aq) MY(s) NX(aq) solution
Ionic equation
Study this reaction carefully In the formation of the precipitate of barium sulphate, BaSO4, the chemical equation can be written:
BaCl2(aq) + Na2SO4 (aq) BaSO4(s) + 2NaCl (aq)
Ions
Ba
2+
+ Cl + Na + SO4 BaSO4 + Na + Cl
2-
Ions , CO3 , Cl
2-
Ionic equation Zn
2+
2-
Ag Ba Pb Pb
Ag
2-
2+
, SO4 , Cl
-
Ba Pb
2+
2+
2+
2+
, SO4
2-
Pb
2+
PbSO4 CaCO3
Ca
2+
, CO3
2-
Ca
2+
+ CO3
2-
1. 20 cm3 lead(II) nitrate 0.1 mol dm-3 solution is measured with measuring cylinder 50 ml, and poured into a beaker. 2. 20 cm3 potassium iodide 0.1 mol dm-3 solution is measured with measuring cylinder 50 ml and poured into a beaker contains lead(II) nitrate solution. 3. The mixture is stirred with a glass rod. A yellow precipitate is formed.
Precipitate of lead(II) iodide (yellow) Filter funnel Beaker Sodium nitrate solution
Retort stand
4. The mixture is filtered to obtain the yellow solids of lead(II) iodide as the residue. 5
Glass rod
5. The residue is rinsed with distilled water to remove other ions in it.
Filter paper
6. The yellow solid is dried by pressing between two pieces of filter paper.
EASY LAH !
Notes: Reactive metal is magnesium, aluminium, and zinc Unreactive metal is iron, lead, silver a. Sodium, potassium or ammonium salts prepared from acid and alkali reaction. Salt NaCl K2SO4 NH4NO3 CH3COONa Alkali NaOH KOH NH3/NH4OH NaOH HCl H2SO4 HNO3 CH3COOH Acid Chemical equation NaOH + HCl NaCl + H2O 2KOH + H2SO4 K2SO4 + 2H2O NH3 + HNO3 NH4NO3 + H2O NaOH + CH3COOH CH3COONa + H2O
Note: To prepare the above salts, titration technique is use. b. Soluble salt (except sodium, potassium and ammonium salt) is prepared using these methods - Acid and metal - Acid and metal oxide - Acid and metal carbonate Acid that must be used HCl HNO3 H2SO4 HNO3 Substance that can be use to react with acid Metal Zn Mg Metal oxide ZnO MgO CuO PbO Metal carbonate ZnCO3 MgCO3 CuCO3 PbCO3 7
The reaction between acid and alkali is known as what process? Refer to acids and bases notes ok. Dont worry Ill help you.! Kita bukan along kita cuma nak tolong.
Burette
Retort stand
Hydrochloric acid
Conical flask 25 cm3 NaOH + phenolphthalein indicator 1. 25.0 cm3 sodium hydroxide solutions is pipette into conical flask. 2. Two drops of phenolphthalein indicator are added into conical flask. The colour of solution is recorded. 3. A 50 cm3 burette is filled with hydrochloric acid. The initial burette reading is recorded. 4. Hydrochloric acid is added gradually from a burette into conical flask and swirling the conical flask. 5. Titration is stopped when phenolphthalein changes from pink to colourless. The final burette reading is recorded. 6. The volume of hydrochloric acid used is calculated. 7. The experiment is repeated by adding hydrochloric acid (known volume) to 25.0 cm3 sodium hydroxide in a beaker without using phenolphthalein. Step 2: Preparation (Crystallization)
Salt solution
8. The mixture is transferred into a evaporating dish. 9. The colourless solution is slowly heated/evaporated until its saturated or to about one-third (1/3) of the original volume. 10. The saturated solution is then cooled to allow crystallization to occur. Step 3: Purification
Distilled water
Glass rod
10. The white crystals formed are then filtered, rinsed with a little distilled water and dried by pressing between filter paper.
Note: Phenolphthalein indicator is used at the beginning of the experiment to determine the volume of hydrochloric acid that is required to react completely with 25 cm3 of sodium hydroxide. However experiment is repeated without using phenolphthalein so that the salt prepared will not contaminated by the indicator.
10
B. Preparing soluble salt through reaction between acid i. Metal oxide. ii. Metal iii. Metal carbonate Procedure To Prepare a Soluble Salt (not Na, K or NH4+) 50 cm3 of acid is measured using a measuring cylinder and poured into a beaker. The acid is heated slowly. Using a spatula, metal / metal oxide / metal carbonate powder is added a little at a time while stirring the mixture with a glass rod. The addition of the solid powder is stopped when some solids no longer dissolve anymore. (the solid is excess and all the acid is completely neutralised by the solid)
Acid
The filtrate is transferred to an evaporating dish. The filtrate is heated until saturated. (The filtrate is evaporated to about one-third (1/3) of the original volume) The saturated solution is then allowed to cool to room temperature and the salt crystals are formed. The crystals are filtered and rinsed with a little cold distilled water. Salt crystals are then dried by pressing it between filter papers.
Filtrate Heating
Example: Preparing copper(II) sulphate (Sulphuric acid and copper(II) oxide powder) Step 1: Preparation Spatula Stir Copper(II) oxide
Bunsen burner
1. 50 cm3 sulphuric acid 0.1 mol dm-3 is put in a beaker and is heated. 2. Using spatula copper(II) oxide powder is added a little at a time to the hot sulphuric acid while stirring continuously with glass rod. 3. The addition of copper(II) oxide is stopped when solids powder remain undissolved.
4. The mixture is filtered to remove the excess copper(II) oxide. 5. The filtrate is transferred to an evaporating dish.
12
6. The filtrate is slowly heated/evaporated until its saturated, or to about one-third (1/3) of the original volume. 7. The saturated solution is then allowed to cool to room temperature. Step 3: Purification
Copper(II) sulphate
8. The crystals are filtered and rinsed with a little cold distilled water. 9. Salt crystals are then dried by pressing it between filter papers. REMEMBER. THIS NOTES OK Unreactive metal such as lead (Pb), copper (Cu), and silver (Ag) cannot react with dilute asid. So to prepare salt contains lead ions (Pb2+), copper ions (Cu2+) or silver ions (Ag+), we must use either oxide powder or carbonate powder only. Example: CuO CuCO3 Cu + + + H2SO4 H2SO4 H2SO4 CuSO4 + H2O (ok)
All crystals have these physical characteristics: a) Reqular geometry shapes, such as cubic or hexagonal. b) Flat faces, straight edges and sharp angles. c) Same angle between adjacent faces. d) All crystals of the same salt have the same shape although the sizes may be different.
Start to memorize the solubility of a salt in water OK. It will help you a lot to better understand this chapter. KNOWLEDGE IS POWER
The solubility of a salt in water depends on the types of cations and anions present. Salt Sodium, potassium and ammonium salts + + + (Na , K , NH4 ) Nitrate salt (NO3 )
-
All are soluble All chloride salts are soluble in water except
2-
14
In the qualitative analysis of salts, we need to identify the ions that are present in salts. This can be done by analysing their physical and chemical properties.
Salt 1. Ammonium chloride NH4Cl 2. Ammonium nitrateNH4(NO3)3 3. Calcium carbonate CaCO3 4. Calcium nitrate Ca(NO3)2 5. Magnesium sulphate MgSO4 6. Magnesium carbonate MgCO3 7. Zinc sulphate Zn SO4 8. Zinc nitrate Zn(NO3)2 9. Lead(II) chloride , PbCl2 10. Lead(II) sulphate , PbSO4 11. Lead(II) carbonate , PbCO3 12. Copper(II) chloride , CuCl2 13 Copper(II) sulphate , PbSO4 14. Copper(II) carbonate , PbCO3 15. Iron(II) sulphate , FeSO4 16. Iron(III) chloride , FeCl3 17. Sodium nitrate , NaNO3 18, Sodium carbonate , Na2CO3 19. Potassium nitrate , KNO3 20. Potassium carbonate , K2CO3
Colour in solid white white white white white white white white white white white Blue Blue Green Green Brown / Yellow white white white white
Colour in Aqueous solution colourless colourless colourless colourless colourless colourless Blue Blue Pale green Brown/Yellow/ Yellowish brown colourless colourless colourless colourless
15
The table shows the colour of different cations in the solid form or in aqueous solution Observation Blue solution Inference Ion copper (Cu
2+
) present
Ion Iron(II) Fe
2+
present
3+
present
Hydrated Fe
, CuCO3
Brown solid
Hydrated Fe
+
3+
salt
+ + 2+
White solid
, Ca
2+
Al
3+
, Zn
2+
, Pb
2+
Colourless solution
, Ca
2+
, Al
3+
, Zn
2+
, Pb
2+
The table shows the solubility of different types of salts in water Compounds Sodium salts Potassium salts Ammonium salts Nitrate salts Solubility in water
Chloride salts
All are soluble except AgCl, HgCl and PbCl2 (soluble in hot water)
Sulphate salts
Carbonate salts
All are insoluble except sodium carbonate, potassium carbonate and ammonium carbonate
16
Oxygen gas, O2
Hydrogen gas , H2
Test with moist blue litmus paper Test with a drop of concentrated ammonia NH3 solution Bubble the gas produced into purple acidified potassium manganate (VII), KMnO4 solution Test with moist blue litmus paper
Moist blue litmus paper turns red and then turns white
17
3.
Effect of heat on carbonate salts Colour of salt before heating Colour of residue Effect on lime water Hot Black powder cold Black powder The gas liberated turns lime water milky/chalky The gas liberated turns lime water milky/chalky The gas liberated turns lime water milky/chalky No change The gas liberated turns lime water milky/chalky No change The gas liberated turns lime water milky/chalky
Carbonaate salt
Copper (II) carbonate, CuCO3 Zinc carbonate , ZnCO3 Lead(II) carbonate, PbCO3 Sodium carbonate, Na2CO3 Calcium carbonate, CaCO3 Potassium carbonate, K2CO3 Magnesium carbonate, MgCO3
Green powder
White solid
Yelow solid
White solid
White solid
Brown sold
Yelow solid
White solid
White solid
White solid
White solid
White solid
White solid
White solid
White solid
White solid
White solid
White solid
White solid
Effect of heat on nitrate salts Colour of salt before heating Colour of residue Hot Black powder cold Black powder
Nitrate Salt
Test on gases liberated A brown gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter A browan gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter A browan gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter A colourless gas that rekindles a glowing splinter is liberated A browan gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter
Blue solid
White solid
Yellow solid
White solid
White solid
Brown solid
Yellow solid
White solid
White solid
White solid
White solid
White solid
White solid
18
White solid
White solid
White solid
A colourless gas that rekindles a glowing splinter is liberated A browan gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter A browan gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter A browan gas that turns blue litmus paper red is liberated. The gas liberated also ignites a glowing splinter
White solid
White solid
White solid
Brown solid
ReddishBrown solid
The table shows the comparison of the effect of heat on carbonate and nitrate salts Metal Potassium Sodium Calcium Magnesium Aluminium Zinc Iron Tin Lead Copper Mercury Silver Gold Effect of heat on carbonate salt Are not decomposed by heat Effect of heat on nitrate salt Decompose to nitrite salt and oxygen gas.
Most sulphate salts are not decomposed by heat. Only a few sulphate such as iron(II) sulphate,zinc sulphate and copper sulphate decompose to sulphur dioxide or sulphur trioxide gas when heated. All chloride salts are stable when heated except ammonium chloride. Ammonium chloride sublimes and decomposes to produce ammonia gas and hydrogen chloride gas. The table shows the deduction of the types of ion present based on the gas produced Type of gas produced CO2 O2 NO2 SO2 NH3 Type of ion present(anion) Carbonate ion (CO3
2-
Nitrate ion (NO3 ) present Nitrate ion (NO3 ) present except NaNO3 and KNO3 Sulphate ion (SO4
2-
) present
19
+ 2H CO2 +
2 cm of nitric acid + 2 cm of the unknown solution pour 3 into a test tube + 2 cm silver nitrate solution
3
Cl ion
Ag + Cl AgCl
2 cm of dilute hydrochloric 3 acid / nitric acid + 2 cm of the unknown solution pour into 3 a test tube + 2 cm of barium chloride / barium nitrate solution shake well
3
SO4 ion
2-
Ba
2+
+ SO4 BaSO4
2-
2 cm of the unknown solution pour into a test tube 3 2 cm of dilute sulphuric acid + 3 2 cm of iron(II) sulphate solution shake well. Then drop carefully and slowly a few drops of concentrated sulphuric acid along the side of a slanting test tube into the mixture without shaking it.
Brown ring is formed at the boundary between the concentrated H2SO4 (top layer) and aqueous solution of the mixture (bottom layer)
NO3 ion
20
Tests for cations Confirmatory Test for Fe2+, Fe3+, Pb2+, NH4+ Ions
Confirmatory Test for Fe Reagent Potassium hexacyanoferrate(II) solution Potassium hexacyanoferrate(III) solution Potassium thiocyanate solution Confirmatory Test for Pb Method
2+ 2+
Observation Pale blue precipitate Dark blue precipitate Dark blue precipitate Greenish-brown solution Pale red colouration Blood red colouration
Conclusion Fe ion is present 3+ Fe ion is present 2+ Fe ion is present 3+ Fe ion is present 2+ Fe ion is present 3+ Fe ion is present
2+
Observation - A white precipitate is formed When heated dissolve in water to form colourless solution When cooled white precipitate reappear
Ionic Equation Pb
2+
Using aqueous solution of chloride 3 - 2 cm of any solution of Cl + 3 2+ 2 cm of any solution of Pb 3 dilute with 5 cm of distilled water heat until no further change occurs allow the content to cool to room temperature using running water from the tap
+ 2Cl PbCl2
Using aqueous solution of iodide 3 - 2 cm of any solution of I + 3 2+ 2 cm of any solution of Pb 3 dilute with 5 cm of distilled water heat until no further change occurs allow the content to cool to room temperature using running water from the tap
- A yellow precipitate is formed When heated dissolve in water to form colourless solution When cooled yellow precipitate reappear
Pb
2+
+ 2I PbI2
Observation
+ 3
2 cm of any solution of NH4 + 2 cm of NaOH / KOH / Ca(OH)2 heat put a piece of moist red litmus paper at the mouth of the test tube
Reaction with Nesslers Reagent 3 + 3 2 cm of any solution of NH4 + 2 cm of Nesslers Reagent shake well
21
Easylah
Cations
+ NaOH (aq)
No precipitate
Precipitate produced
White precipitate
Coloured precipitate
NH4
Na
Green Fe
2+
Blue Cu
2+
Brown Fe
2+
Pb
2+
Zn
2+
Al
3+
Ca
2+
Mg
2+
Pb Zn Al Ca Mg
2+ 2+ 2+ 2+
3+
: White precipitate dissolves/larut in excess NaOH : White precipitate insoluble/tidak larut in excess NaOH 22
Easylah
Cations
+ NH3 (aq)
No precipitate
Precipitate produced
White precipitate
Coloured precipitate
NH4
Na
Ca
2+
Green Fe
2+
Blue Cu
2+
Brown Fe
2+
Zn
2+
Pb
2+
Al
3+
Mg
2+
Zn Pb Al Mg
2+ 2+ 3+
: White precipitate dissolves/larut in excess NH3 : White precipitate insoluble/tidak larut in excess NH3 23
2+
Zn2+ ion is the only cation that form white precipitate and dissolves in both excess NaOH and NH3 solutions. Mg2+ ion is the only cation that form white precipitate and insoluble in both excess NaOH and NH3 solutions. Ca2+ ion in the only cation that form white precipitate in NaOH solutions, but no precipitate in NH3 solution. Fe2+ , Fe3+ and Cu2+ ions is easy to spot because the ions shows coloured precipitate. Pb2+ ion and Al3+ ion form white precipitate and dissolves in excess NaOH solution, but insoluble in excess NH3 solutions.
A chemical tests can be carried out in the laboratory to differentiate between Pb2+ and Al3+. (Please refer to Confirmatory Test for Pb2+, in ealier notes).
Example: lead(II) nitrate solution and aluminium nitrate solution Sodium sulphate solution is added slowly into 2 cm3 of the solution to be tested in a test tube. If a white precipitate is formed, then then the solution tested is lead(II) nitrate. If no change occurs, then the solution tested is aluminium nitrate.
24
Now let see some questions about salt. Try to solve it by yourself first and then compare with the answers provided.
Example 1:
Describe chemical tests that can be carried out in the laboratory to differentiate between (a) lead(II) nitrate solution and aluminium nitrate solution Sodium sulphate solution is added slowly into 2 cm of the solution to be tested in a test tube. If a white precipitate is formed, then then the solution tested is lead(II) nitrate. If no change occurs, then the solution tested is aluminium nitrate.
3
(b) aluminium nitrate solution and zinc nitrate solution Aqueous ammonia solution is poured slowly into 2 cm of the solution to be tested in a test tube until in excess. If a white precipitate that dissolves in excess aqueous ammonia solution is formed, than the solution tested is zinc nitrate. If a white precipitate that is insoluble in excess aqueous ammonia solution is formed, than the solution tested is aluminium nitrate.
3
(c) ammonium chloride solution and potassium chloride solution Nesslers Reagent is added to 2 cm of the solution to be tested in a test tube. If a brown precipitate is formed, then the solution tested is ammonium chloride. If no change occurs, then the solution tested is potassium chloride
3
(d) iron(II) sulphate solution and iron(III) sulphate solution Potassium hexacyanoferrate(II) solution is poured into 2 cm of the solution to be tested in a test tube. If a dark blue precipitate is formed, then the solution tested is iron(III) chloride. If no change occurs, then the solution tested is iron(II) chloride. Or Potassium hexacyanoferrate(III) solution is poured into 2 cm of the solution to be tested in a test tube. If a greenish-brown solution is formed, then the solution tested is iron(III) chloride. If no change occurs, then the solution tested is iron(II) chloride. Or
3 3
25
Potassium thiocyanate solution is poured into 2 cm of the solution to be tested in a test tube. If a blood red colouration is formed, then the solution tested is iron(III) chloride. If no change occurs, then the solution tested is iron(II) chloride.
(e) sodium chloride and sodium sulphate Silver nitrate solution is poured into 2 cm of the solution to be tested in a test tube. If a white precipitate is formed, then the solution tested is sodium chloride. If no change occurs, then the solution tested is sodium sulphate. Or Barium chloride solution is poured into 2 cm of the solution to be tested in a test tube. If a white precipitate is formed, then the solution tested is sodium sulphate. If no change occurs, then the solution tested is sodium chloride.
3 3
Example 2:
1. State three examples of a) soluble salts Potassium carbonate Lead(II) nitrate Ammonium chloride
Lead(II) chloride
Sodium carbonate
Calcium sulphate
Barium sulphate
3. Identify the gas that turns moist red litmus paper blue Ammonia gas
26
5.
Salt P
Heat
Metal oxide X
Gas Y
Colour of metal oxide X is yellow when hot and white when cold. Gas Y turns lime water milky. a) Name gas Y b) Name metal oxide X c) Name salt P : carbon dioxide gas : zinc oxide : zinc carbonate
d) Write an equation to represent the action of heat on salt P ZnCO3 (s) ZnO (s) + CO2 (g)
6. A sample of copper(II) nitrate, Cu(NO3)2 was heated strongly. Write down the expected observation. Copper(II) nitrate decompose to produce black colour of residue when hot and cold. A brown gas that changed moist blue litmus paper to red and colourless gas that lighted up a glowing wooden splinter are produced.
27
Example 1; Ammonium phosphate, (NH4)3PO4 is use as a fertilizer. 29.8g of this salt is prepared by neutralizing phosphoric acid, H3PO4 with ammonium gas, NH3. Calculate the volume of ammonium gas, NH3 reacted at room conditions. ( Relative atomic mass; H, 1: N, 14: P, 31; O, 16; Molar volume; 24 dm3 mol-1 at room conditions) Solutions;
= a. Calculate the number of moles = 0.2 mol 2.88 g [3(14) + 12(1) + 31 + 4(16)
b. Write a balanced chemical equation Compare the mole ratio of NH3 and (NH4)3PO4 c. Calculate the number of moles of NH3 base on the mole ratio
-1
28
Example 2: 3.9 g of potassium is burnt completely in the air as shown in the following equation; 4K(s) + O2(g) 2K2O(s) What is the mass of potassium oxide produced? [Relative atomic mass: K, 39; O, 16] Solutions Tip: Solve the question step by step Step 1: Write Chemical Equation 4K(s) + O2(g) 2K2O(s) 4 mol of K react with 1 mol of O2 produce 2 mol K2O Step 2: Calculate the number of mole [Get the information from the question] mass No. of mol K = Molar mass 3.9 g = 39 gmol-1 0.1 mol
Step 3: Find the coefficient From Balance Chemical Equation FBCE; 4 mol of K produce 2 mol K2O Thus; 0.1 mol of K produce 2/4 mol K2O = 0.2 mol K2O FBCE; [Sebelah kiri] Bil. mol yang telah dikira 4 mol K 0.1mol K = = [Sebelah kanan] Bil. Mol yang hendak ditentukan 2 mol K2O 2/4 x 0.1mol K2O = 0.05 mol K2O
No. of mol of K2O = 0.05 mol Step 4: Solve the questions Thus; Mass of K2O = 0.05 mol Molar mass = 0.05 mol 55 g mol-1 = 2.75 g 29
Example 3: Acids reacts with calcium carbonate, CaCO3 in limestone to form a salt and carbon dioxide, CO2. A piece of limestone reacted completely with 100 cm3 of 31.5 g dm-3 nitric acid, HNO3. [Relative atomic mass: H, 1; C, 12; N, 14; O, 16; Ca, 40. Molar volume: 24 dm3 mol-1 at room conditions] a. Calculate the mass of salt produced. b. What is the volume of carbon dioxide, CO2 liberated at room conditions? Step 1: Write Chemical Equation Chemical Equation: 2HNO3 + CaCO3 Step 2: Calculate the number of mole Get the information from the question; Concentration of HNO3
-3 = 31.5 g dm
-3 = 0.5 mol dm
= = FBCE; 2HNO3 + CaCO3 2 mol HNO3 0.05 mol HNO3 = = 0.05 mol
1000
Ca(NO3)2 + CO2 + H2O 1 mol Ca(NO3)2 x 0.05 mol Ca(NO3)2 = 0.025 mol Ca(NO3)2
No. of mol of Ca(NO3)2 = 0.025 mol Mass of Ca(NO3)2 = 0.025 mol 40 + 2[14 + 3(16)] g mol-1 = 4.1 g
30
= =
Ca(NO3)2 + CO2 + H2O 1 mol CO2 x 0.05 mol CO2 = 0.025 mol CO2
No. of mol of CO2 = 0.025 mol Volume of CO2 = 0.025 mol 12 + 2(16) dm3 mol-1 = 1.1 dm3
Example 4: Pb(NO3)2 compound decomposes when heated as shown in the following equation. If 6.62 g of Pb(NO3)2 compound is heated, calculate; [Relative atomic mass: N, 14; O, 16; Pb, 207; 1 mol of gas occupies 22.4 dm3 at s.t.p.] (i) mass of PbO that is produced (ii) volume of nitrogen dioxide produced at s.t.p (ii) volume of oxygen produced at s.t.p Solution: 2Pb(NO3)2 2PbO + 4NO2 + O2
mass No of mol Pb(NO3)2 = Molar mass 6.62 g = 331 gmol-1 0.02 mol 2PbO + 4NO2 + O2 2 mol PbO 0.02 mol PbO
= FBCE; 2Pb(NO3)2 2 mol Pb(NO3)2 0.02 mol Pb(NO3)2 No of mol PbO = 0.02 mol Mass of PbO = 0.02 x 223 = 4.46 g = =
31
FBCE;
= =
FBCE;
Numerical Problems involving stoichiometric reactions in the precipitation of salts Question 1: A student prepare copper(II) nitrate, Cu(NO3)2 by reacting copper(II) oxide, CuO with 200 cm3 of 2.0 moldm-3 nitric acid, HNO3. Calculate the mass of copper(II) oxide, CuO needed to react completely with the acid. [Relative atomic mass: Cu, 64 ; O, 16] Question 2: X cm3 of 0.5 moldm-3 sulphuric acid, H2SO4 is added to 100 cm3 of 1.0 moldm-3 lead(II) nitrate solution to produce lead(II) sulphate, PbSO4. [Relative atomic mass: Pb, 20; O, 16; S, 32] a. Calculate the value of X. b. Calculate the mass of lead(II) sulphate obtained.
Start to do exercises from any book. I will help and guide you to master this topic.
Prepared by; Kamal Ariffin Bin Saaim SMKDBL 32