Académique Documents
Professionnel Documents
Culture Documents
28
Features
Compact and robust stainless steel assembly 1.4435 (316L) Piezoresistive measuring element Gauge, absolute or sealed gauge Standard DIN pressure ranges from 0100 mbar to 01000 bar Calibration available for all common pressure units Complies with the EMC directive 89/336/EEC High reliability Short delivery time Customized versions due to modular assembly Reverse polarity and short circuit protected Media temperature up to 150 C (optional) Interface RS232C or RS485
Specifications
Pressure range Overpressure [bar] 0.1 0.5 3 bar > 0.5 2 3 x FS
(min. 3 bar)
> 2 25 3 x FS
> 25 600 3 x FS
(max. 850 bar, optional 1500 bar)
> 850
(optional 1500 bar)
Zero based non-conformity according to DIN 16086, including hysteresis and repeatability
Each DTM has a serial number and a customer programmable mark Materials
Electromagnetic compability
Standard Emission: EN 50081-1:1992 EN 55022:1994 Immunity: EN 50082-2:1995 EN 61000-4-2:1995 ENV 50140:1993 ENV 50204:1995 EN 61000-4-4:1995 ENV 50141:1993 Generic emission standard Emission, class B Level Typical interferences
Generic immunity Electrostatic discharge Radiated electro-magnetic field Radiated electro-magnetic field (GSM) Fast transients (burst) Conducted radio-frequency
4kV contact, 8kV air 10V/m, 80-1000 MHz, 80% AM 1kHz 10V/m, 950 MHz, 200Hz on/off 2 kV 10V, 0.15-80 MHz, 80% AM 1kHz
Cellular phones, radio sets Digital portable phones Motors, valves Cellular phones, radio sets
The pressure transmitter DTM fulfill the emission and immunity requirements described in the EMC directive 89/336/EEC.
Ordering Information
Type Pressure type DTM Gauge Absolute Sealed gauge 0100 mbar 0160 mbar 0250 mbar 0400 mbar 0600 mbar 01.0 bar 01.6 bar 02.5 bar 04.0 bar 06.0 bar 010 bar 016 bar 025 bar 040 bar 060 bar 0100 bar 0160 bar 0250 bar 0400 bar 0600 bar 01000 bar Special calibration G 1/4 female G 1/4 M G 1/4 M, Manometer DIN 16288 G 1/2 M G 1/2 M, frontal diaphragm G 1/2 M, flush diaphragm G 1/2 M, Manometer DIN 16288 1/4 NPT M 1/2 NPT M Special process connection Connector DIN 43650 (screwed on) 3) Connector Binder 723, 5-pin 3) Connector MIL C26482, (10-6) 3) PE cable 4) 5) PUR cable 4) Teflon cable 4) Special electrical connection RS232C RS485 0.25% FS (for pressure ranges 500 mbar) 0.1 % FS (for pressure ranges > 500 mbar) Compensated 070C (media temperature 0 80C) Compensated -2585C (media temperature -25100C) Compensated -2585C (media temperature -25150C) Special temperature range Throttle 2) Electronics packed in gel: Gauge pressure Absolute and sealed gauge pressure Temperature measurement (ambient temperature) Special oil filling: ASEOL Food Halocarbon Seals: EPDM Kalrez Special options
5)
Pressure range
3 3 3 3 3 3 3 3 (Fig. 1) (Fig. 2) (Fig. 3) (Fig. 4) (Fig. 5) (Fig. 6) (Fig. 7) (Fig. 8) (Fig. 10) (Fig. 11) (Fig. 13) (Fig. 14) (Fig. 14) (Fig. 14)
Process connection
Electrical connection
Interface
Accuray
1 2
Temperature range
0 1 2 9 A C D E G H S T Z
Options
2) 3)
Available only with fig. 2, fig. 4 or fig. 7 Cable socket connector not included 4) Please specify the required cable length
Pressure Connection
Dimensions
Version for media temperature up to 100C
Electrical Connection
46.5
G 1/4 F
SW27
24
32,5
Fig. 1
Fig. 10
12
3 1 2
32,5 16
Fig. 2
Version for media temperature up to 150C
G 1/4 M
Fig. 11
24
68
SW27
35,5 13,5
Fig. 3
L
G 1/2 M
SW27
L = 121 mm for connector DIN 43650 (Fig. 10) Pin RS232C RS485
32,5
20,5
Fig. 4
74.5
G 1/2 M 18,4 SW27
1 2 3 4
Fig. 12 Fig. 5
Cable socket connector
A B F E D
34,5
19,5
G 1/2 M
18,4
SW27
33,5
Fig. 6
62.5
Pin RS232C RS485 A B C D +Vin GND RxD TxD +Vin GND +RS485 - RS485
25
G 1/2 M
Fig. 13
SW27
43
Fig. 7
Colour RS232C RS485 white yellow brown green +Vin GND RxD TxD +Vin GND +RS485 - RS485
17
1/2 NPT M
PG9
SW27
Fig. 14
31,5
Fig. 8