Académique Documents
Professionnel Documents
Culture Documents
6
KNOWN: Large vertical plate with uniform surface temperature of 130C suspended in quiescent air at 25C and atmospheric pressure. FIND: (a) Boundary layer thickness at 0.25 m from lower edge, (b) Maximum velocity in boundary layer at this location and position of maximum, (c) Heat transfer coefficient at this location, (d) Location where boundary layer becomes turbulent. SCHEMATIC:
ASSUMPTIONS: (1) Isothermal, vertical surface in an extensive, quiescent medium, (2) Boundary layer assumptions valid. -6 2 PROPERTIES: Table A-4, Air Tf = ( Ts + T ) / 2 = 350K, 1 atm : = 20.92 10 m /s, k =
0.030 W/mK, Pr = 0.700. ANALYSIS: (a) From the similarity solution results, Fig. 9.4 (see above right), the boundary layer thickness corresponds to a value of 5. From Eqs. 9.13 and 9.12,
y = x ( Grx / 4 )
1/ 4
(1)
(3) <
1/ 2 2 1/2 2 20.92 106 m 2 / s 3 9 u= Grx f ( ) = 0.275 = 0.47 m/s. 6.718 10 ( 0.25 ) x 0.25m
< <
The maximum velocity occurs at a value of = 1; using Eq. (3), it follows that this corresponds to a position in the boundary layer given as
1/ 4 1/ 4 9 0.25 3 / 4 Nu x = h x x/k = ( Grx / 4 ) g ( Pr ) = 6.718 10 ( ) 0.50 = 35.7 h x = Nu x k/x = 35.7 0.030 W/m K/0.25 m = 4.3 W/m2 K.
The value for g(Pr) is determined from Eq. 9.20 with Pr = 0.700. (d) According to Eq. 9.23, the boundary layer becomes turbulent at xc given as
< <
Excerpts from this work may be reproduced by instructors for distribution on a not-for-profit basis for testing or instructional purposes only to students enrolled in courses for which the textbook has been adopted. Any other reproduction or translation of this work beyond that permitted by Sections 107 or 108 of the 1976 United States Copyright Act without the permission of the copyright owner is unlawful.