Académique Documents
Professionnel Documents
Culture Documents
The surface setback regulations in the revised draft SGEIS must be taken into account in order to determine New Yorks likely recoverable shale gas reserves. The table below is a summary of the relevant proposed water, land, and buildings setback regulations. Each of the setbacks listed is to the edge of the well pad. There is no setback for infrastructure or ancillary systems, such as pits, compressors, etc.
Setback regulations were modeled in GIS software using source data from a variety of publicly available sources. Setback distances were applied to each individual instance of a setback object as indicated below. NYS GIS Clearinghouse (rivers, creeks, streams, ponds, lakes, reservoirs, wells, public water supplies, state parks, state lands, WMAs, land use) PA Spatial Data Access Broome County GIS (buildings, storm drains, water wells, public water supplies) National Atlas FEMA (flood plains) Cornell University Geospatial Information Repository (CUGIR) Water and land object data was available across the entire 6 county fairway area Chemung, Tioga, Broome, Chenango, Delaware, Sullivan. Broome County had the most complete data across all object types, and includes the broadest range of area development profiles ranging from the highly populated areas along the Susquehanna River to very rural areas in northern and eastern parts of the county. As a result Broome County has the largest percentage of area restricted by setbacks as depicted in the map below. Only the area above the 150 feet shale thickness line was considered in the calculations.
Broome County had the highest restricted percentage at 47%. Chenango county had the lowest percentage restricted area at 24%. The combined percentage of restricted area within the fairway across all 6 counties was 39%, representing 966 square miles. This leaves a total of 1,474 square miles of Marcellus fairway accessible for well pad locations.