Académique Documents
Professionnel Documents
Culture Documents
Agenda
> Sheet Metal User Experience Projects > Creo Parametric Flexible Modeling Extension
Sketcher Enhancements
Select any planar surface or datum Select a sketch-based feature Immediately in sketcher Sketcher references automatically selected
Attached geometry preview shows feature fully regenerated Attached preview guarantees feature will succeed No surprises when you commit to the feature definition
No Preview
Unattached Preview
Attached Preview
7
Automatic Regeneration
10
11
13
14
15
16
17
18
19
21
22
23
24
25
> Geometry
Convert Solid to Sheet Metal Wall Extend / Trim Corner Relief
Sketched Rip Edge Rip Surface Rip Rip Connect Split Area (Deformation Area)
26
27
Corner Relief
> Dynamic Preview
28
2008 PTC
29
> Switch between Solid Walls, Solid Cut and Surface > Add Bends on Sharp Edges
> Automatic Merge Option > SMT Cut in Solidify Tool
30
Bend
> Dynamic Preview
> Directly Manipulate the Default Bend Line with Drag Handles and Offsets
> Or create the Bend Line in Sketcher
31
32
Regular Unbend
> Dynamic Preview
> Manual or Automatic Selection of Bent Geometry > Uses Part Default Fixed Geometry if defined
> Deformation Control adds the ability to Rip Out Deformation Areas > Control whether or not previously designated relief geometry is created
> Improved Troubleshooter messages
33
> Show or Hide with a Push Button > Flat Pattern is Enhanced
Use Unbend All Tool to Define Deformation Areas and Control Use pre-defined fixed geometry Flatten All Forms
> Flat State functionality is preserved under a config option enable_flat_state yes
34
35
> New Preferences dialog to set SMT Parameters > Convert SMT internal Params to Standard part params
> Added param types for:
Bend and corner relief types, edge treatment
37
> Recognition
Pattern Recognition & Editing Symmetry Recognition & Editing
> Propagation
Combine transformations with recognition
> Transformations
Move
With dragger By dimension By assembly
38
39
Recognition Tools
40
41
42
Selection
Multiple shape rules can be combined via control key Any surfaces can be excluded via control key Rules are alive like all selection rules
43
Selection
44
Keeps original geometry in original location; makes a copy Allows the use of advanced selection techniques to exclude surfaces from the selection set.
Special Collector for Moving Curves and Datums with the Geometry Set
45
Move surfaces via multiple, recorded steps Move with no steps: Free Move
Only final position is recorded 3 Translations, OR 1 Rotation
Apply parametric control to key surfaces Enable design studies Develop families of imported models
Define new design intent on older models Explore what-if scenarios not possible with existing design intent
46
Move by Constraints
47
48
Next
Extension Edges
49
Next Next
Bounding Edge
50
When unchecked, system will not attempt to recreate rounds at the final location May need to manually create rounds or modify some geometry first Controls how the system reacts to changes in topology around the flex move feature. When checked, the system will fail the feature if the system cannot apply the remembered solution because of a topology change When un-checked, the system try to apply the remembered solution, but switch to the first found default solution if possible.
51
52
Use Flip to get the complementary solution Splitting Extending Surfaces Surface
Flip
53
54
Modify Analytic
55
Substitute
56
Edit Rounds
> Selection
Use Round recognition or the system analyzes round geometry from selected round surface automatically Does NOT rely on round feature definitions Works the same for imported or native geometry
Existing rounds are removed and recreated at constant radius (including variable radius rounds) Options:
Unattach Leave interfering rounds alone Remove rounds
57
Offset
The Big Brother of Core Offset
> Uses the Same Technology as Move
Removes and recreates rounds Extends surfaces to attach to surrounding geometry
Tool calculations done as you enter the tool, even with no drag
58
59
Attach
Attach Quilts in Difficult Locations
> Extends One-Sided Edges of the Quilt to Attach
No need to embed the quilt in the solid
Allows you to edit the quilt in the final location before attaching Always extends one-sided edges to try to find geometry Multiple solutions possible if multiple depths are possible
Build a new quilt in the desired location, attach using this tool
Attach
Remove
Keep removed surfaces makes a copy useful for complex selection sets Leave open removes the selected surfaces and does not extend adjacent surfaces to close. New Quilt when working with surfaces, this option creates a new quilt from the extended geometry Surface when working with solids, this option creates the surface extensions as a separate quilt, unattached to the model
61
Mirror
> Only Option is to Split Extending Surfaces > Workflow like Standard Feature Mirror
62
63
64
65
Propagation
66
67
Thank You
Brian Thompson
Director of Product Management
brthompson@ptc.com