Académique Documents
Professionnel Documents
Culture Documents
7-3 Seminar
DNV 2.7-2, DNV 2.22 & Container-related services in DNV Houston
DNV Houston 10th October 2011
Topics Covered
DNV 2.7-2 DNV 2.22 and CG3 Certificates DNV Houston Services Q&A
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 2
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 3
DNV 2.7-2:
- Service container for temporary installation (laboratories, control and work vans, etc) - Structural code references DNV 2.7-1
DNV 2.7-3:
No requirements for defined structural geometry Can be for single installation events Under 50 tonnes (can be used for container shaped above 25 tonnes) Designed for specific cargo
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 4 Slide 4
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 5 Slide 5
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 6 Slide 6
Service Container
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 7 Slide 7
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 8
- Compliance with 2.22 is required if unit has DNVs Additional Class CRANE
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 9
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 10
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 11
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 12
CG3 Certificate
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 13
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 14
DNV-Houston Services
Verification
Calculations/Finite Element Analysis and review of manufacturing drawing Deliverables include Design Verification Report and Design Assessment for Type Approval
Survey
Witness/review of manufacturing process (i.e. material traceability, welding procedures, load testing, etc) Deliverables include Survey Reports
Certification
Verification + Survey Deliverables include Product Certificates and Type Approval Certificate
Dynamic Analysis
Mechanical event simulation for modeling DNV 2.7-3 drop test May submit .step file for initial analysis or for comparative results DNV-Houston may model unit for individual assessment
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 15
Equipment is DNV Certified once a Product Certificate has been issued. Note: a Survey Report is not a Product Certificate! In some cases (e.g., 2.7-1, 2.7-3), periodic examination and testing is required in order to maintain the validity of the Certificate
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 16
Does DNV have requirements for lifting/transportation when equipment is moved from unit to unit?
- No, but National Authorities and/or operators may have requirements for certification
Is the certification process different for equipment designed by one company but fabricated by another?
- No, the process is the same.
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 17
DNV 2.7-1 & 2.7-3 Seminar Det Norske Veritas AS. All rights reserved. 18