Académique Documents
Professionnel Documents
Culture Documents
Flow measurement circuit Pressure gauge Pressure gauge Flow meter (flow meter device)
p2
Flow control valve Standard flow rate qn The standard flow rate is measured at an input pressure of p1 = 6 bar and an output pressure with respect to atmospheric pressure (p2 = 0 bar). Flow control at both sides p1 Input pressure p2 Output O pressure
1 2
Typical applications Mini slide SLT with standard flow control valves
Internet: www.festo.com/catalogue/...
Description
Adjustable speed of advance and return strokes. The air flow is identical in both directions.
Single-acting cylinder with one-way flow control valve Exhaust and supply air flow control Adjustable speed of advance and return strokes. The air flow can be adjusted differently for both directions.
Single-acting cylinder with flow control valve Flow control acting at both sides Speed adjustment through flow control at both sides is often applied in the case of single-acting or small cylinders. The benefit of this application lies in its simplicity.
Internet: www.festo.com/catalogue/...
-V- New
VFOC-S Flow control valves and one-way flow control valves
Product range overview Function Version Type yp Material Flow rate characteristic1) One-way flow control function Supply air Exhaust air Z A
Both O
Standard flow control Rotatable 360 around the screw-in axis after installation valve with Q QS p push-in Adjustment via slotted head screw fitting g GRLA--QS--D Q Metal Low flow GRLZ--QS--D Q Adjustment via slotted head screw GRLA--QS--MF-D
Metal
Medium flow
Chromed metal
Medium flow
Metal
Low flow
Metal
Medium flow
Adjustment via slotted head screw, swivel connection rotatable 360 GRXA--QS--D Metal Low flow
Polymer
High flow
Polymer
Medium flow
Adjustment via slotted head screw, push-in sleeve for QS push-in fittings VFOC-E- Metal Low flow VFOC-S-
1)
Low flow: precision adjustment for low speed Medium flow: precision adjustment for medium speed High flow: precision adjustment for high speed
Internet: www.festo.com/catalogue/...
-V- New
VFOC-S Flow control valves and one-way flow control valves
Product range overview Type yp Pneumatic connection Thread Tubing [mm] 3 4 6 Free of copper pp and PTFE Page/Internet g /
Tubing g type yp 1) 8 10 12
Rotatable 360 around the screw-in axis after installation Adjustment via slotted head screw GRLA--QS--D Q M5 GRLZ--QS--D Q Gx G Gy G Adjustment via slotted head screw GRLA--QS--MF-D Gx
13 3
13
20
Adjustment via knurled screw GRLA--QS--RS-D Q M5 Gx G Gy G Adjustment via knurled screw GRLA--QS--RS-MF-D Gx
13 3
13
Adjustment via slotted head screw, swivel connection rotatable 360 GRXA--QS--D M5 Gx G Adjustment via knurled screw GRLA--QS--RS-B Gx G Gy Adjustment via rotary knob VFOV-LE Gx
13
20
26
Adjustment via slotted head screw, push-in sleeve for QS push-in fittings VFOC-E- VFOC-S-
29
1)
Tubing
Internet: tubing
Internet: www.festo.com/catalogue/...
Both O
Metal
Medium flow
Metal
Medium flow
Adjustment via slotted head screw GRLA--PK--B GRLZ--PK--B GRLO--PK--B Adjustment via knurled screw GRLA--PK--RS-B GRLZ--PK--RS-B
Metal
Medium flow
2)
Metal
Medium flow
1)
2)
Low flow: precision adjustment for low speed Medium flow: precision adjustment for medium speed High flow: precision adjustment for high speed Only for tubing I.D. 3 mm
Internet: www.festo.com/catalogue/...
Tubing g type yp 1) 8 10 12
Adjustment via slotted head screw GRLA--B M5 GRLZ--B Gx GRLO--B G Gy G G Adjustment via knurled screw GRLA--RS-B M5 GRLZ--RS-B Gx G
Dependent p on fitting g
47 7
Adjustment via slotted head screw GRLA--PK--B M5 GRLZ--PK--B Gx GRLO--PK--B G Adjustment via knurled screw GRLA--PK--RS-B M5 GRLZ--PK--RS-B Gx G
53
53
1)
Tubing
Internet: tubing
Internet: www.festo.com/catalogue/...
Both O
Adjustment via slotted head screw GRLA--QS- GRLZ--QS- GRLO--QS- GRLA--QS--LF-C GRLZ--QS--LF-C GRLO--QS--LF-C GRGA--QS- GRGZ--QS- GRGO--QS- GRGA--QS-LF-C GRGZ--QS-LF-C GRGO--QS-LF-C Adjustment via slotted head screw GRLA- GRLZ- GRLO- GRLA--LF-C GRLZ--LF-C GRLO--LF-C Adjustment via slotted head screw GRLA--PK--LF-C GRLZ--PK--LF-C GRLO--PK--LF-C GRGA--PK--LF-C GRGZ--PK--LF-C GRGO--PK--LF-C Adjustment via slotted head screw CRGRLA--B
Metal
Low flow
Metal
Low flow
Metal
Low flow
Metal
Low flow
Corrosion resistant one-way y flow control valve with female threaded connection
Stainless steel
Medium flow
1)
Low flow: precision adjustment for low speed Medium flow: precision adjustment for medium speed High flow: precision adjustment for high speed
Internet: www.festo.com/catalogue/...
Adjustment via slotted head screw GRLA--QS- M3 GRLZ--QS- GRLO--QS- GRLA--QS--LF-C M5 GRLZ--QS--LF-C GRLO--QS--LF-C GRGA--QS- M3 GRGZ--QS- GRGO--QS- GRGA--QS-LF-C M5 GRGZ--QS-LF-C GRGO--QS-LF-C Adjustment via slotted head screw GRLA- M3 GRLZ- GRLO- GRLA--LF-C M5 GRLZ--LF-C GRLO--LF-C Adjustment via slotted head screw GRLA--PK--LF-C M5 GRLZ--PK--LF-C GRLO--PK--LF-C GRGA--PK--LF-C M5 GRGZ--PK--LF-C GRGO--PK--LF-C Adjustment via slotted head screw CRGRLA--B M5 Gx G Gy G
1) Tubing Internet: tubing
Dependent on fitting
59
62
Dependent p on fitting g
65 5
Internet: www.festo.com/catalogue/...
Both O
Polymer y
Metal
Medium flow
Flow control/silencer / Adjustment via slotted head screw, directly screwed into valve combinations, , threaded GRE- Metal Medium flow design g
GRU-
Polymer y
High g flow
Standard flow control valve with barbed fitting connection PK, frame assembly Precision flow control valve with barbed fitting connection PK Precision flow control valve on sub-base
Metal
Low flow
Adjustment via rotary knob GRP---PK- GRPO---PK- GRP-- x-AL GRPO-- x-AL
Polymer
Low flow
Polymer
Low flow
Functional combination with one-way flow control valve and piloted non-return p valve
Metal
High flow
Precision adjustment via internal hex and setting of the ranges using a selector switch GRLSA- x-QS-6 Metal Low flow
1)
Low flow: precision adjustment for low speed Medium flow: precision adjustment for medium speed High flow: precision adjustment for high speed
10
Internet: www.festo.com/catalogue/...
Dependent p on fitting g
72 7
Adjustment via slotted head screw, directly screwed into valve GRE- Gx G Gy G GRU- Gx G Gy G G Adjustment via knurled screw GRF-PK-3-
77
80
Adjustment via rotary knob GRP---PK- GRPO---PK- GRP-- x-AL GRPO-- x-AL Gx
86 82
38
Precision adjustment via internal hex and setting of the ranges using a selector switch GRLSA- x-QS-6 Gx
29
1)
Tubing
Internet: tubing
Internet: www.festo.com/catalogue/...
11
Tubing connection Type of connection QS Push-in connector for standard O.D. tubing PK Barbed fitting connector for standard I.D. tubing For tubing O.D. or tubing I.D. 3 3 mm 4 4 mm 6 6 mm 8 8 mm 10 10 mm Setting component RS Knurled screw Slotted head screw
Flow rate characteristic LF, MF Generation B C D1) Series A Series B Series C Series D Low flow, medium flow
The series D is entirely free of copper and PTFE and thus does not have an additional CT note in the type code
12
Internet: www.festo.com/catalogue/...
GRL-QS--D
GRL-QS--RS-D
GRXA--QS-D
One-way flow control valve for supply air GRLZ General technical data Screw-in thread Valve function Setting component Type of mounting Assembly position Special p features Max. tightening torque GRLA/GRXA GRLZ
M5
Gx
Gy
[Nm]
One-way flow control function for exhaust air One-way flow control function for supply air Slotted heard or knurled screw Can be screwed in Any Freely rotatable around the screw-in axis after installation Swivel joint, freely rotatable 1.5 5.5 11
20
40
Operating and environmental conditions Screw-in thread Operating medium Operating pressure Storage temperature Ambient temperature Temperature of medium [bar] [C] [C] [C]
M5
Gx
Gy
Dried air, lubricated or unlubricated, grade of filtration 40m 0.2 10 10 +40 10 +60 10 +60
Weights [g] Screw-in thread GRL-D GRXA--D GRLA--MF-D GRLA--RS-D GRLA--RS-QSD GRLA--RS-QSMF-D
M5 13 14
Gx 22 16 32 23 24 40
G 42 26 30 50
Gy 60 47 40 72
G 106 124
Internet: www.festo.com/catalogue/...
13
Gx MF 0 400 290 420 0 475 325 500 LF 0 130 100 130 0 160 120 190 0 185 160 240 0 215 175 250
0 130 100 130 0 160 120 190 0 185 160 240 0 215 175 250
Standard flow rate qn [l/min] at 6 bar > 0 bar Screw-in thread M5 One-way flow control function for exhaust air Flow rate characteristic GRLA-/GRXA/ -D QS-3 Q 3 D1) R2) QS-4 Q D R QS-6 Q D R QS-8 Q D R QS-10 Q D R QS-12 Q D R One-way flow control function for supply air GRLZ--D QS-3 Q 3 D R QS-4 Q D R QS-6 Q D R QS-8 Q D R
1) 2) D: Flow control direction R: Non-return direction
Gx MF LF 0 180 200 220 0 250 270 300 0 370 330 390 0 400 330 410
0 200 180 200 0 300 260 290 0 340 390 460 0 370 390 470
14
Internet: www.festo.com/catalogue/...
qnN [l/min]
qn [l/min]
n Screw-in thread Gx
Screw-in thread Gx
qnN [l/min]
qn [l/min]
qnN [l/min]
qn [l/min]
qnN [l/min]
qn [l/min]
Internet: www.festo.com/catalogue/...
15
qnN [l/min]
qn [l/min]
qnN [l/min]
qn [l/min]
Materials Sectional view 1 2 Flow control valve 1 5 4 3 2 3 4 5 Regulating g g screw Swivel joint Threaded collar Seal Release ring Material note Slotted head screw: Brass Knurled screw: Stainless steel Die-cast zinc Wrought aluminium alloy (M5: nickel-plated brass) Nitrile rubber Polyacetal Designs free of copper, PTFE and silicone Ordering data
16
Internet: www.festo.com/catalogue/...
Screw-in thread D
Tubing O.D. D1
D2 8.2 +0.15 10.0 0.2 12.0 0.2 10 2 0.2 10.2 0 2 12.5 0.2 14.5 0.2 12.5 0.2 14.5 0.2 12.5 0.2 14.5 0.2 17.5 0.2 12.5 0.2 14.5 0.2 17.5 0.2 20.5 0.15
D3
H1
L max.
L1
L2
Swivel joint, elbow outlet, slotted head screw M5 5 3 8.9 4 9.9 6 12 Gx 3 4 6 13 8 13.8 8 Gx ( (MF) ) 6 8 G 6 8 17.8 7 10 Gy 6 8 22.4 10 G 12 27.8 Swivel joint, elbow outlet, knurled screw M5 5 3 8.9 4 9.9 6 12 Gx 3 4 13.8 3 6 Gx ( (MF) ) 6 13 8 13.8 8 G 6 8 17.8 7 10 Gy 6 8 22.4 10 G 12 27.8
8.9 9 0.07
13 8 0.07 13.8 0 07
22.4 24.7 26.5 31.9 29.4 32.6 35.6 36.6 39.6 36 6 36.6 42.0 39.8 44.1 46.7 55.3
17.8 7 0.15
18 20.3 22 25 22.5 25.7 28.7 27.7 30.7 27.7 30.7 33.1 28.6 32.9 35.5 41.4
21.4
3.7 3 7 +0.17/0.25 /
12
17 2 17.2
15 5
16.1 20.3 36.0 3 42.3 6.95 95 +0.15/0.3 / 8.15 +0.15/0.3 19 3 19.3 23.0 19 9 24
8.2 +0.15 10.0 0.2 12.0 0.2 10.2 0.2 10.2 0.2 12.5 0.2 12.5 0.2 14.5 0.2 12.5 0.2 14.5 0.2 17.5 0.2 12.5 0.2 14.5 0.2 17.5 0.2 20.5 0.15
8.9 9 0.07
13.8 3 0.07
22.4 24.7 26.5 31.9 29.4 32.6 36.6 39.6 36 6 36.6 42.0 39.8 44.1 46.7 55.3
17.8 7 0.15
18 20.3 22 25 22.5 25.7 27.7 30.7 27.7 30.7 33.1 28.6 32.9 35.5 41.4
31.3 3 3
3.7 3 7 +0.17/0.25 /
40.4
5.1 +0.17/0.25 5 /
12
48
48.3 3
55.3 55 3 65.7
19 3 19.3 23.0
19 9 24
Internet: www.festo.com/catalogue/...
17
Screw-in thread D M5 5
Tubing O.D. D1 3 4 6 3 4 6 8 6 8 10
D2
+0.15/0.1
D3
H1
H2
L1
L2
L3
8.9 9.9 12
Gx
13 8 13.8
17.8 7
8.9 9 0.07
13 8 0.07 13.8 0 07
17.8 7 0.15
20.7 22.4 24.7 27.6 27.6 29.6 31.6 33.6 35.6 38.9
12.15 12.95 14.15 15.6 15.6 16.6 17.6 18.6 19.6 21.25
21.4 21.4 21.4 26.9 26.9 26.9 26.9 31.5 31.5 31.5
3.6 3.6 3.6 4.9 4.9 4.9 4.9 5.7 5.7 5.7
11.5 11.5 11.5 14.1 14.1 14.1 14.1 17.5 17.5 17.5
8 8 8 12 12 12 12 15 15 15
18
Internet: www.festo.com/catalogue/...
Screw-in thread
Flow
One-way flow control function for exhaust air Part No. Type 193 137 193 138 193 139 193 142 193 143 193 144 537 075 193 145 537 076 193 146 193 147 193 148 193 149 193 150 193 151 193 152 GRLA-M5-QS-3-D GRLA-M5-QS-4-D GRLA-M5-QS-6-D GRLA-x-QS-3-D GRLA-x-QS-4-D GRLA-x-QS-6-D GRLA-x-QS-6-MF-D GRLA-x-QS-8-D GRLA-x-QS-8-MF-D GRLA--QS-6-D GRLA--QS-8-D GRLA--QS-10-D GRLA-y-QS-6-D GRLA-y-QS-8-D GRLA-y-QS-10-D GRLA--QS-12-D
One-way flow control function for supply air Part No. Type 193 153 193 154 193 155 193 156 193 157 193 158 193 159 GRLZ-M5-QS-3-D GRLZ-M5-QS-4-D GRLZ-M5-QS-6-D GRLZ-x-QS-3-D GRLZ-x-QS-4-D GRLZ-x-QS-6-D GRLZ-x-QS-8-D
Swivel joint, elbow outlet, slotted head screw M5 5 3 4 6 Gx 3 4 6 6 8 8 G 6 8 10 Gy 6 8 10 G 12 Swivel joint, elbow outlet, knurled screw Free of copper, PTFE and silicone M5 5 3 4 6 Gx 3 4 6 6 8 8 G 6 8 10 Gy 6 8 10 G 12 Swivel joint, outlet parallel and rotatable, slotted head screw M5 5 3 4 6 Gx 3 4 6 8 G 6 8 10
LF LF LF LF LF LF MF LF MF LF LF LF LF LF LF LF
LF LF LF LF LF LF MF LF MF LF LF LF LF LF LF LF
197 576 197 577 197 578 197 579 197 580 197 581 537 072 534 337 537 073 534 338 534 339 534 340 534 341 534 342 534 343 534 344
GRLA-M5-QS-3-RS-D GRLA-M5-QS-4-RS-D GRLA-M5-QS-6-RS-D GRLA-x-QS-3-RS-D GRLA-x-QS-4-RS-D GRLA-x-QS-6-RS-D GRLA-x-QS-6-RS-MF-D GRLA-x-QS-8-RS-D GRLA-x-QS-8-RS-MF-D GRLA--QS-6-RS-D GRLA--QS-8-RS-D GRLA--QS-10-RS-D GRLA-y-QS-6-RS-D GRLA-y-QS-8-RS-D GRLA-y-QS-10-RS-D GRLA-y-QS-12-RS-D
LF LF LF LF LF LF LF LF LF LF
195 806 195 807 195 808 195 809 195 810 195 811 195 812 195 813 195 814 195 815
GRXA-M5-QS-3-D GRXA-M5-QS-4-D GRXA-M5-QS-6-D GRXA-x-QS-3-D GRXA-x-QS-4-D GRXA-x-QS-6-D GRXA-x-QS-8-D GRXA--QS-6-D GRXA--QS-8-D GRXA--QS-10-D
Internet: www.festo.com/catalogue/...
19
General technical data Screw-in thread Valve function Adjustment component Type of actuation Type of mounting Installation position Special features Max. tightening torque
Gx
[Nm]
One-way flow control function for exhaust air Slotted head screw Manual Screw-in Any Freely rotatable around the screw-in axis after installation 5.5 11
Operating and environmental conditions Screw-in thread Operating medium Operating pressure Storage temperature Ambient temperature Temperature of medium Corrosion resistance class CRC
1)
Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m 0.2 10 10 +150 0 +150 0 +150 31)
Corrosion resistance class 3 to Festo standard 940 070 Components requiring higher corrosion resistance. External visible parts in direct contact with industrial atmospheres or media such as solvents and cleaning agents, with a predominantly functional requirement for the surface.
Gx/4 25
Gx/6 25
Gx/8 25
G/6 37
G/8 37
20
Internet: www.festo.com/catalogue/...
Standard flow rate qn [l/min] at 6 bar } 0 bar Screw-in thread Gx One-way flow control function for exhaust air GRLA-F- -D QS-4 Q D1) R2) QS-6 D R QS-8 D R
1) 2) D: Flow control direction R: Non-return direction
Standard nominal flow rate qnN at 6 bar } 5 bar as a function of turns of the adjusting screw n Screw-in thread Gx Screw-in thread G
Materials Sectional view 1 2 5 4 3 One-way flow control valve 1 2 3 4 5 Regulating screw Swivel joint Hollow bolt Seal Release ring High-alloy stainless steel Nickel and chrome plated brass Wrought aluminium alloy Fluorocarbon rubber Nickel and chrome plated brass Free of copper and PTFE
Internet: www.festo.com/catalogue/...
21
Screw-in thread D Gx
Tubing outer D1 4 6 8 6 8
D2 9 11 13 11 13
L max. 31.6 3
L1
13.8 3
5.2 5
12
17 8 17.8
34 9 34.9
59 5.9
15
Screw-in thread
One-way flow control function for exhaust air Part No. Type 195 597 195 598 195 599 195 600 195 601 GRLA-F-x-QS-4-D GRLA-F-x-QS-6-D GRLA-F-x-QS-8-D GRLA-F--QS-6-D GRLA-F--QS-8-D
22
Internet: www.festo.com/catalogue/...
One-way flow control valve for exhaust air GRLA General technical data Screw-in thread Valve function Setting component Type of mounting Assembly position Special features Max. tightening torque Permissible actuation torque for the regulating screw
GRLA--QS--RS-B
Gx
Gy
[Nm] [Nm]
One-way flow control function for exhaust air Knurled screw Can be screwed in Any Freely rotatable around the screw-in axis after installation 4 11 0.4
40
Operating and environmental conditions Screw-in thread Operating medium Operating pressure Ambient temperature Temperature of medium [bar] [C] [C]
Gx
Gy
Filtered compressed air, lubricated or unlubricated, grade of filtration 40m 0.2 10 10 +60 10 +60
Gx 25
G 30
Gy 40
Internet: www.festo.com/catalogue/...
23
Standard flow rate qn [l/min] at 6 bar > 0 bar Screw-in thread Gx One-way flow control function for exhaust air GRLA QS-6 Q D1) R2) QS-8 Q D R
1) 2) D: Flow control direction R: Non-return direction
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n Screw-in thread Gx, G, Gy
Standard flow rate qn at 6 bar > 0 bar as a function of turns of the adjusting screw n Screw-in thread Gx, G, Gy
qnN [l/min]
qn [l/min]
Materials Sectional view 1 2 Flow control valve 1 2 3 4 5 Regulating screw Swivel joint Threaded collar Seal Release ring Brass PBT-reinforced Wrought aluminium alloy Nitrile rubber Polyacetal
5 3 4
24
Internet: www.festo.com/catalogue/...
Screw-in thread D Gx G Gy
Tubing O.D. D1 6 8 6 8 6 8
D2 13 17 13 17 13 17
L1
L2
47 4.7 58 5.8 6
13 17 19
Screw-in thread
One-way flow control function for exhaust air Part No. Type 162 965 162 966 162 967 162 968 162 969 162 970 GRLA-x-QS-6-RS-B GRLA-x-QS-8-RS-B GRLA--QS-6-RS-B GRLA--QS-8-RS-B GRLA-y-QS-6-RS-B GRLA-y-QS-8-RS-B
Internet: www.festo.com/catalogue/...
25
General technical data Screw-in thread 2 QS push-in fitting 1 Valve function Actuation type Means of setting Type of mounting Mounting position Special features Max. tightening torque [mm]
Gx 4 6 One-way flow control function for exhaust air Manual Rotary knob Screw-in Any Freely rotatable around the screw-in axis after installation 3 8
[Nm]
Operating and environmental conditions Screw-in thread Operating medium Operating pressure Storage temperature Ambient temperature Temperature of medium [bar] [C] [C] [C]
Gx Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m 0.2 10 10 +40 10 +60 10 +60
26
Internet: www.festo.com/catalogue/...
Standard flow rate qn [l/min] at 6 bar > 0 bar Screw-in thread One-way flow control function for exhaust air VFOV QS-4 Q D1) R2) QS-6 Q D R QS-8 Q D R
1) 2) D: Flow control direction R: Non-return direction
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of the turns of the adjusting screw n Screw-in thread Gx
Standard flow rate qn at 6 bar > 0 bar as a function of the turns of the adjusting screw n Screw-in thread Gx
Q4 Q6/8
Q4 Q6/8
Internet: www.festo.com/catalogue/...
27
www.festo.com
Screw-in thread D Gx
Tubing O.D. D1 4 6 8
D3 16
L 24.2
L1 5.5 5 5
14
Screw-in thread
QS p Q push-in fitting g
Weight [g] 10 10 12
4 6 8
28
Internet: www.festo.com/catalogue/...
General technical data Screw-in thread Valve function Means of adjustment Actuation type Type of mounting Mounting position Special features Max. tightening torque
Gx One-way flow control function for exhaust air Internal hex Manual Screw-in Any Freely rotatable around the screw-in axis after installation 5.5
[Nm]
Operating and environmental conditions Screw-in thread Operating/control medium Operating pressure Storage temperature Ambient temperature Temperature of medium Pneumatic connection 2 Pneumatic connection 1 [bar] [C] [C] [C]
Gx Dried air, lubricated or unlubricated, grade of filtration 40 m 0.2 10 10 +40 10 +60 10 +60 Gx QS-6
Gx 19.5
Standard nominal flow rate qnN at 6 bar > 5 bar Screw-in thread Flow control direction Non-return direction [l/min] [l/min]
Standard flow rate qn at 6 bar > 0 bar Screw-in thread Flow control direction Non-return direction [l/min] [l/min]
Internet: www.festo.com/catalogue/...
29
Standard flow rate qn at 6 bar > 0 bar as a function of spindle swivel angle n = 300 degrees
30
Internet: www.festo.com/catalogue/...
Dimensions
www.festo.com
D Gx
D1 6
B 12.5
B1 13.8
B2 15
H 25.7
L 36.6
L1 5.1
L2 13.6
L3 2
1 12
2 3
Screw-in thread
2
QS [mm] 6
Type GRLSA-x-QS-6
Gx
Internet: www.festo.com/catalogue/...
31
One-way flow control valve for exhaust air GRLA General technical data Screw-in thread Valve function Setting component Type of mounting Assembly position Special features Max. tightening torque Permissible actuation torque for the regulating screw
Gx
[Nm] [Nm]
One-way flow control function for exhaust air Slotted head screw Threaded Any Freely rotatable around the screw-in axis after installation 4 11 0.4
Operating and environmental conditions Screw-in thread Operating medium Operating pressure Storage temperature Ambient temperature Temperature of medium [bar] [C] [C] [C]
Gx
Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m 0.2 10 10 +40 10 +60 10 +60
32
Internet: www.festo.com/catalogue/...
Standard flow rate qn [l/min] at 6 bar > 0 bar Screw-in thread One-way flow control function for exhaust air GRLA QS-6 Q D1) R2) QS-8 Q D R
1) 2) D: Flow control direction R: Non-return direction
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n Screw-in thread Gx, G
Standard flow rate qn at 6 bar > 0 bar as a function of turns of the adjusting screw n Screw-in thread Gx, G
qnN [l/min]
qn [l/min]
Materials Sectional view 1 2 5 Flow control valve 1 2 3 4 5 Regulating screw Rotatable connection Threaded spigot Seal Release ring Brass Polybutylene terephthalate, reinforced Wrought aluminium alloy Nitrile rubber Polyacetate
4 3
Internet: www.festo.com/catalogue/...
33
Screw-in thread D Gx G
Tubing O.D. D1 6 8 8
B 0.1 17.9 79
H 36.2 44 4 44.4
H1 27.2 35 4 35.4
L1
L2
47 4.7 5.8
22 8 22.8 22.8
One-way flow control function for exhaust air Part No. Type 540 358 540 359 540 360 GRLA-x-QS-6-B-20 GRLA-x-QS-8-B-20 GRLA--QS-8-B-20
34
Internet: www.festo.com/catalogue/...
-V- New
VFOC-S One-way flow control valves VFOC
Technical data Function One-way flow control valve Exhaust air QS push-in connectors Adjustment via slotted head screw Push-in sleeve for QS push-in fittings Exhaust air flow control Supply air flow control
Supply air
General technical data Push-in connector Valve function Adjustment QS push-in connectors for tubing O.D. Type of mounting Mounting position
QS-4
QS-6
[mm]
One-way flow control function for exhaust or supply air Via slotted head screw 4 6 Push-in sleeve Any
Operating and environmental conditions Push-in connector Operating/control medium Operating pressure Storage temperature Ambient temperature Temperature of medium [bar] [C] [C] [C]
QS-4
QS-6
Dried air, lubricated or unlubricated, grade of filtration 40 m 0.2 10 10 +40 10 +60 10 +60
QS-4 9.2
QS-6 21.6
Standard nominal flow rate qnN [l/min] at 6 bar > 5 bar Push-in connector Flow control direction Non-return direction
Standard flow rate qn [l/min] at 6 bar > 0 bar Push-in connector Flow control direction Non-return direction
Internet: www.festo.com/catalogue/...
35
-V- New
VFOC-S One-way flow control valves VFOC
Technical data Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n Standard flow rate qn at 6 bar > 0 bar as a function of turns of the adjusting screw n
S6-Q6 S4-Q4
S6-Q6 S4-Q4
Materials Sectional view 1 2 One-way flow control valve 1 2 3 4 E S Adjusting screw Stainless steel Swivel connection Die-cast zinc Seal Nitrile rubber Release ring Polyacetal Arrangement of non-return valve for exhaust air flow control (colourless anodised push-in sleeve) Arrangement of non-return valve for supply air flow control (blue anodised push-in sleeve)
-H-
Note
The push-in sleeves of the one-way flow control valves VFOC are exclusively matched to QS fittings from Festo www.festo.com/catalogue. This combination alone guarantees a secure grip in the push-in fitting.
36
Internet: www.festo.com/catalogue/...
-V- New
VFOC-S One-way flow control valves VFOC
Technical data Dimensions Download CAD data www.festo.com
D S4 S6
D1 QS-4 QS-6
D2 10 12.5
D3 8.9 13.8
H 24.7 32.6
H1 20.3 25.7
L 23.2 28
L1 14.8 16.5
L2 13.2 15.8
Push-in connector
One-way flow control valve for exhaust air Part No. 540 362 540 363 Type VFOC-E-S4-Q4 VFOC-E-S6-Q6
One-way flow control valve for supply air Part No. 559 723 559 724 Type VFOC-S-S4-Q4 VFOC-S-S6-Q6
QS-4 QS-6
Internet: www.festo.com/catalogue/...
37
Functional combination with one-way flow control valve and piloted nonreturn valve
General technical data Screw-in thread Valve function Setting component QS push-in fittings for tubing O.D. Type of mounting Assembly position Max. tightening torque
Gx One-way flow control function for exhaust air and d additional dditi l piloted il t d non-return t valve l Slotted head screw 4; 6 Screw in via male thread Any 5.5
[mm]
6; 8
[Nm]
11
Operating and environmental conditions Screw-in thread Operating medium / pilot medium Operating pressure Pilot pressure Storage temperature Ambient temperature Temperature of medium [bar] [bar] [C] [C] [C]
Gx
Dried air, lubricated or unlubricated, grade of filtration 40 m 0.5 10 2 10 10 +40 10 +60 10 +60
Gx 27
G 58
-H-
Note A supplementary risk analysis by the user/designer is essential. The instructions and notices on the enclosed product leaflets must be observed.
The GRXA-HG product family and all of its design variants must ONLY be used in safety-relevant applications in combination with additional measures detailed in EN 954-1.
38
Internet: www.festo.com/catalogue/...
Functional combination
Technical data Standard nominal flow rate qnN [l/min] at 6 bar > 5 bar Screw-in thread Gx One-way flow control function for exhaust air and piloted non-return valve GRXA-HG QS-4 Q D1) 130 R2) 100 140 B3) 100 140 QS-6 Q D 140 R 115 165 B 120 160 QS-8 Q D R B
1) 2) 3) D: Flow control direction R: Non-return direction B: Non-return direction actuated
G 280 200 260 180 140 280 200 280 190 260
Standard flow rate qn [l/min] at 6 bar > 0 bar Screw-in thread Gx One-way flow control function for exhaust air and piloted non-return valve GRXA-HG QS-4 Q D1) 210 R2) 230 260 B3) 220 250 QS-6 Q D 280 R 270 300 B 260 300 QS-8 Q D R B
1) 2) 3) D: Flow control direction R: Non-return direction B: Non-return direction actuated
G 430 430 490 410 470 470 460 520 440 500
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n One-way flow control valve
Standard flow rate qn at 6 bar > 0 bar as a function of turns of the adjusting screw n One-way flow control valve
qnN [l/min]
qn [l/min]
n GRXA-HG- -QS-8 GRXA-HG- -QS-6 GRXA-HG- x-QS-6 GRXA-HG- x-QS-4 GRXA-HG- -QS-8 GRXA-HG- -QS-6 GRXA-HG- x-QS-6 GRXA-HG- x-QS-4
Internet: www.festo.com/catalogue/...
39
Functional combination
Technical data Minimum pilot pressure as a function of operating pressure Non-return valve, piloted
p21 [bar]
p1 [bar]
Materials Sectional view 4 2 1 4 Functional combination 1 2 3 4 Adjusting screw Rotatable connection Seal Release ring Brass Die-cast zinc Nitrile rubber Polyacetate
40
Internet: www.festo.com/catalogue/...
Functional combination
Technical data Dimensions Rotatable connection, elbow outlet, slotted head screw Download CAD data www.festo.com
Pneumatic connection D Gx G
D1 4 4
D2 4 6 6 8
D3 14.5 5 19 9
D4 14.8 19 9
D5 9 9
D6 10 12.5 12.5 17
H1 34.5 3 5 42.7 7
H3 15 5 21
L 49.5 95 56.3 5 3
L1 4.9 9 5.6 5
L2 44.6 51.4 5
L3 17.4 7 21.1
1 13 3 17 7
2 12 16
Screw-in thread
2
Part No.
Type
Gx G
Internet: www.festo.com/catalogue/...
41
Flow control acting at both sides GRLO/GRGO GRL Low flow: Precision adjustment for low speed QS push-in connector Adjustment with slotted head screw GRG
General technical data Screw-in thread Valve function GRLA/GRGA GRLZ/GRGZ GRLO/GRGO
M3 One-way flow control function for exhaust air One-way flow control function for supply air Flow control function Slotted head screw Threaded Any 0.3
M5
[Nm]
1.5
Operating and environmental conditions Screw-in thread Operating medium Operating p gp pressure Ambient temperature Temperature of medium GRL/GRG GRLO/GRGO [bar] [bar] [C] [C]
M3
M5
Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 0 10 10 +60 10 +60
M3 7 14
M5 9 14
42
Internet: www.festo.com/catalogue/...
M5 0 40 46 70 0 40 50 75
0 41 27 50
0 41 27 44
0 48 36 52 0 48 40 65
0 18 0 41
0 40 0 48 0 40 0 48
Standard flow rate qn [l/min] at 6 bar > 0 bar Screw-in thread M3 One-way flow control function for exhaust air GRLA/GRGA / QS-3 Q 3 F1) N2) QS-4 Q F N One-way flow control function for supply air GRLZ/GRGZ / QS-3 Q 3 F N QS-4 Q F N Flow control function, acting at both sides GRLO/GRGO / QS-3 Q 3 F N QS-4 Q F N
1) 2) F: Flow control direction N: Non-return direction
M5 0 95 90 130 0 95 95 140
0 95 75 110
0 95 75 100
0 50 0 95
0 90 0 105 0 90 0 105
Internet: www.festo.com/catalogue/...
43
qnN [l/min]
qn [l/min]
qnN [l/min]
n n
44
Internet: www.festo.com/catalogue/...
qn [l/min]
3 1
Screw-in thread D
Tubing O.D. D1
B 0.15
H1
H2
L1
L2
L3
Swivel joint, elbow outlet, slotted head screw M3 3 8 M5 5 3 9.8 4 9.8 Swivel joint, parallel outlet, slotted head screw M3 3 8 M5 5 3 9.8 4 9.8
20 22.4 22.2
7 7.3 7.3
7 7 7
18 19.8 19.8
14 15.8 15.8
9.25 10 10
22 26.2 25.7
7 7 7
Internet: www.festo.com/catalogue/...
45
Screw-in thread
For tubing O.D. One-way flow control function for exhaust air [mm] Part No. Type GRLA-M3-QS-3 GRLA-M5-QS-3-LF-C GRLA-M5-QS-4-LF-C
One-way flow control function for supply air Part No. Type 175 043 175 055 175 058 GRLZ-M3-QS-3 GRLZ-M5-QS-3-LF-C GRLZ-M5-QS-4-LF-C
Flow control function acting at both sides Part No. Type 175 042 175 054 175 057 GRLO-M3-QS-3 GRLO-M5-QS-3-LF-C GRLO-M5-QS-4-LF-C
QS push-in connector, elbow outlet, slotted head screw M3 3 175 041 M5 5 3 175 053 4 175 056 QS push-in connector, parallel outlet, slotted head screw M3 3 175 044 M5 5 3 175 062 4 175 065
46
Internet: www.festo.com/catalogue/...
General technical data Screw-in thread Valve function GRLA GRLZ GRLO
M5
Gx
Gy
[Nm]
One-way flow control function for exhaust air One-way flow control function for supply air Flow control function Slotted head or knurled screw Threaded Any 1.5 6 11
20
40
60
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Operating and environmental conditions Screw-in thread Operating medium Operating p gp pressure Ambient temperature Temperature of medium GRLA/GRLZ GRLO [bar] [bar] [C] [C]
M5
Gx
Gy
Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 0.3 10 0 10 10 +60 10 +60
M5 11 12
Gx 28 30
G 60 59
Gy 97
G 204
G 377
Internet: www.festo.com/catalogue/...
47
0 95 76 95
0 95 76 95
0 95
48
Internet: www.festo.com/catalogue/...
qnN [l/min]
qn [l/min]
Screw-in thread Gx
Screw-in thread Gx
qnN [l/min]
qn [l/min]
Screw-in thread G
Screw-in thread G
qnN [l/min]
qn [l/min]
Internet: www.festo.com/catalogue/...
49
qnN [l/min]
qn [l/min]
Screw-in thread G
Screw-in thread G
qnN [l/min]
qn [l/min]
Screw-in thread G
Screw-in thread G
qnN [l/min]
qn [l/min]
50
Internet: www.festo.com/catalogue/...
Screw-in thread D
Connecting thread D
H1
L1
L2
17.5 28 36 41 53 64
4 0.3 5.3 +0.45/0.35 8.2 +0.45/0.35 8.8 +0.45/0.35 12.8 0.45 13.5 0.5
9 14 17 22 27 36
M5 Gx G
17.5 28 36
12.5 20 26
9 14 17
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Internet: www.festo.com/catalogue/...
51
Screw-in thread
Connecting thread
One-way flow control function for exhaust air Part No. Type 151 160 151 165 151 172 151 178 151 179 151 180 GRLA-M5-B GRLA-1/8-B GRLA-1/4-B GRLA-3/8-B GRLA-1/2-B GRLA-3/4-B
One-way flow control function for supply air Part No. Type 151 183 151 188 151 195 GRLZ-M5-B GRLZ-1/8-B GRLZ-1/4-B
Flow control function, acting at both sides Part No. Type 151 181 GRLO-M5-B
Female thread, elbow outlet, slotted head screw M5 M5 Gx Gx G G Gy Gy G G G G Female thread, elbow outlet, knurled screw M5 M5 Gx Gx G G
Female thread, elbow outlet, slotted head screw Free of copper, PTFE and silicone M5 M5 Gx Gx G G Gy Gy G G G G
165 663 165 654 165 648 165 662 165 647 165 661
-U-U-U-U-U-U-
52
Internet: www.festo.com/catalogue/...
Series B: Mid flow: Precision adjustment for average speed One-way flow control for supply air GRLZ
Adjustment with slotted head screw Adjustment with knurled screw With screw-in thread Gx and G with union nut
General technical data Screw-in thread Valve function GRLA GRLZ GRLO
M5
Gx
[Nm]
One-way flow control function for exhaust air One-way flow control function for supply air Flow control function Slotted head or knurled screw Threaded Any 1.5 6
11
Operating and environmental conditions Screw-in thread Operating medium Operating p gp pressure Ambient temperature Temperature of medium GRLA/GRLZ GRLO [bar] [bar] [C] [C]
M5
Gx
Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 0.3 10 0 10 10 +60 10 +60
M5 10 11
Gx 25 26
G 44 45
Internet: www.festo.com/catalogue/...
53
M5 0 83 72 83 0 83 76 88
F N F N F N
0 83 72 83 0 83 76 88
PK-3
0 83
54
Internet: www.festo.com/catalogue/...
qnN [l/min]
qn [l/min]
Screw-in thread Gx
Screw-in thread Gx
qnN [l/min]
qn [l/min]
Screw-in thread G
Screw-in thread G
qnN [l/min]
qn [l/min]
Internet: www.festo.com/catalogue/...
55
3 4
Dimensions Slotted head screw, screw-in thread M5 Slotted head screw, screw-in thread Gx, G
3 Barbed fitting
4 Union nut H H1 14.7 16.7 19.1 22.2 22.3 24.2 24.3 L 17.6 17.6 25.2 25.2 25.2 30.8 30.8 L1 4 0.3 4 0.3 5.3 +0.45/0.35 5.3 +0.45/0.35 5.3 +0.45/0.35 8.2 8.2 L2 8.5 8.5 13.4 13.4 12 16.9 17.2 9 9 14 14 14 17 17
Screw-in thread D M5 5 Gx
Tubing I.D. 3 4 3 4 6 4 6
56
Internet: www.festo.com/catalogue/...
3 Barbed fitting Screw-in thread D M5 Gx G Tubing I.D. 3 4 6 4 6 B 10 0.15 16 0.15 16 0.15 20 0.2 20 0.2 H 19.7 30.2 30.3 34.2 34.3 H1 14.7 22.2 22.3 24.2 24.3 L max. 27.3 38.6 38.6 54.8 54.8 L1 4 0.3 5.3 +0.45/0.35 5.3 +0.45/0.35 8.2 +0.45/0.35 8.2 +0.45/0.35
Internet: www.festo.com/catalogue/...
57
Screw-in thread
One-way flow control function for exhaust air Part No. Type 151 161 151 162 151 166 151 167 151 168 151 173 151 174 GRLA-M5-PK-3-B GRLA-M5-PK-4-B GRLA-1/8-PK-3-B GRLA-1/8-PK-4-B GRLA-1/8-PK-6-B GRLA-1/4-PK-4-B GRLA-1/4-PK-6-B
One-way flow control function for supply air Part No. Type 151 184 151 185 151 189 151 190 151 191 151 196 151 197 GRLZ-M5-PK-3-B GRLZ-M5-PK-4-B GRLZ-1/8-PK-3-B GRLZ-1/8-PK-4-B GRLZ-1/8-PK-6-B GRLZ-1/4-PK-4-B GRLZ-1/4-PK-6-B
Flow control function acting at both sides Part No. Type 151 182 GRLO-M5-PK-3-B
Barbed fitting, elbow outlet, slotted head screw M5 5 3 4 Gx 3 4 6 G 4 6 Barbed fitting, elbow outlet, knurled screw M5 3 Gx 4 6 G 4 6 Barbed fitting, elbow outlet, slotted head screw Free of copper, PTFE and silicone M5 5 3 4 Gx 3 4 6 G 4 6
1)
151 164 151 170 151 171 151 176 151 177
151 187 151 193 151 194 151 199 151 200
165 664 165 666 165 655 165 656 165 658 165 649 165 651
-U-U-U-U-U-U-U-
Union nut for barbed fitting only with screw-in thread Gx and G
58
Internet: www.festo.com/catalogue/...
General technical data Screw-in thread Valve function GRLA GRLZ GRLO
M3 One-way flow control function for exhaust air One-way flow control function for supply air Flow control function Slotted head or knurled screw Threaded Any 0.3
M5
[Nm]
1.5
Operating and environmental conditions Screw-in thread Operating medium Operating p gp pressure Ambient temperature Temperature of medium GRLA/GRLZ GRLO [bar] [bar] [C] [C]
M3
M5
Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 0.2 10 0 10 10 +60 10 +60
M3 2
M5 7
Internet: www.festo.com/catalogue/...
59
M3 0 18 18 20
M5 0 40 50 75
F N
0 18 18 20
0 40 40 65
F N
0 18 0 18
0 40 0 48
1) 2)
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n Screw-in thread M3 Screw-in thread M5
qnN [l/min]
qnN [l/min]
60
Internet: www.festo.com/catalogue/...
Screw-in thread D M3 M5
Connecting thread D M3 M5
B 5 8
H 9 16
H1 6.5 12
L 13.3 17.7
L1 2.5 3.1
L2 6.4 8.2
4.5 7
One-way flow control function for exhaust air Part No. Type 175 038 GRLA-M3
One-way flow control function for supply air Part No. Type 175 040 GRLZ-M3
Flow control function acting at both sides Part No. Type 175 039 GRLO-M3
M5
M5
175 047
GRLA-M5-LF-C
175 049
GRLZ-M5-LF-C
175 048
GRLO-M5-LF-C
Internet: www.festo.com/catalogue/...
61
Low flow: Precision adjustment for low speed Barbed fitting connection Adjustment with slotted head screw One-way flow control for supply air GRLZ
General technical data Screw-in thread Valve function GRLA GRLZ GRLO
M5 One-way flow control function for exhaust air One-way flow control function for supply air Flow control function Slotted head or knurled screw Threaded Any 1.5
[Nm]
Operating and environmental conditions Screw-in thread Operating medium Operating p gp pressure Ambient temperature Temperature of medium GRLA/GRLZ GRLO [bar] [bar] [C] [C]
M5 Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 10 +60 10 +60
M5 7
62
Internet: www.festo.com/catalogue/...
M5 0 40 42 63
F N
0 40 35 58
GRLO/GRGO /
F N
0 40 0 48
1) 2)
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n Screw-in thread M5
qnN [l/min]
Materials Sectional view 4 1 Flow control valve 1 2 3 4 Threaded collar Swivel joint Seals Regulating screw Brass, nickel-plated Die-cast zinc Nitrile rubber Brass
Internet: www.festo.com/catalogue/...
63
3 Barbed fitting
3 Barbed fitting
Screw-in thread D
Tubing I.D.
H1
H2
L1
L2
L3
17.7
13.7
17.7
3.1
9.4
15.8
11.8
8.3
17.7
3.1
8.7
21
Screw-in thread
One-way flow control function for exhaust air Part No. Type 175 050 GRLA-M5-PK-3-LF-C
One-way flow control function for supply air Part No. Type 175 052 GRLZ-M5-PK-3-LF-C
Flow control function acting at both sides Part No. Type 175 051 GRLO-M5-PK-3-LF-C
175 059
GRGA-M5-PK-3-LF-C
175 061
GRGZ-M5-PK-3-LF-C
175 060
GRGO-M5-PK-3-LF-C
64
Internet: www.festo.com/catalogue/...
General technical data Screw-in thread Valve function Setting component Type of mounting Mounting position Max. tightening torque
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
M5
Gx
Gy
[Nm]
One-way flow control function for exhaust air Slotted head screw Threaded Any 1.5 6 11
20
40
Operating and environmental conditions Screw-in thread Operating medium Operating pressure Ambient temperature Temperature of medium Weights [g] Screw-in thread [bar] [C] [C]
M5
Gx
Gy
Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 0.3 10 20 +80 10 +60
M5 14
Gx 44
G 83
Gy 150
G 315
Standard nominal flow rate qnN [l/min] at 6 bar > 5 bar Screw-in thread M5 One-way flow control function for exhaust air F1) N2)
1) 2) F: Flow control direction N: Non-return direction
0 95 77 95
Internet: www.festo.com/catalogue/...
65
qnN [l/min]
qn [l/min]
qnN [l/min]
qn [l/min]
66
Internet: www.festo.com/catalogue/...
Screw-in thread D M5 Gx G Gy G
Connecting thread D M5 Gx G Gy G
H1 12.5 20 26 28.5 37
9 14 17 22 27
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Screw-in thread M5 Gx G Gy G
Connecting thread M5 Gx G Gy G
One-way flow control function for exhaust air Part No. Type 161 403 161 404 161 405 161 406 161 407 CRGRLA-M5-B CRGRLA-x-B CRGRLA--B CRGRLA-y-B CRGRLA--B
Internet: www.festo.com/catalogue/...
67
Flow control acting at both sides GRO-QS General technical data Push-in connector1) Valve function Setting component Type of mounting Mounting position Max. tightening torque
1) For standard O.D. tubing
QS-3
QS-4
QS-6
QS-8
[Nm]
One-way flow control function Knurled screw Front panel mounting, in-line installation, via through-holes, with accessories Any 0.9
Operating and environmental conditions Push-in connector Operating medium Operating pressure Ambient temperature Temperature of medium [bar] [C] [C]
QS-3
QS-4
QS-6
QS-8
Compressed air, filtered (to 40m), lubricated or unlubricated 0.2 10 10 +60 10 +60
QS-3 15
QS-4 15
QS-6 25
QS-8 26
68
Internet: www.festo.com/catalogue/...
F1) N2) F N F
0 25 65 70 0 25
Standard flow rate qn [l/min] at 6 bar > 0 bar Push-in connector GR GR-LF GRO
1) 2) F: Flow control direction N: Non-return direction
F1) N2) F N F
Standard nominal flow rate qnN at 6 bar > 5 bar as a function of turns of the adjusting screw n Push-in connector QS-3/QS-4
Standard flow rate qn at 6 bar > 0 bar as a function of turns of the adjusting screw n Push-in connector QS-3/QS-4
qnN [l/min]
qn [l/min]
qnN [l/min]
qn [l/min]
Internet: www.festo.com/catalogue/...
69
4 2 3
Dimensions
www.festo.com
1 Cover cap GRK 2 Hex nut GRM Push-in connector QS-3 QS-4 QS-6 QS-8 Push-in connector QS-3 QS-4 QS-6 QS-8 Ordering data Push-in connector QS-3 QS-4 Q QS-6 Q QS-8
1)
B 14 14 16 16 H7
0.1
D3 0.1
H1 min. 36 36 40.5 40.5 L1 41.8 42.4 51.6 53.4 max. 40 40 44.5 44.5 L2 36 36 43 43
43 4.3
45 4.5
35 3.5
Flow rate characteristic1) Mid flow Mid flow Low flow Mid flow Low flow Mid flow
One-way flow control function Part No. Type 193 965 193 967 193 966 193 969 193 968 193 970 GR-QS-3 GR-QS-4 GR-QS-4-LF GR-QS-6 GR-QS-6-LF GR-QS-8
Flow control function at both sides Part No. Type 193 971 193 972 193 973 GRO-QS-3 GRO-QS-4 GRO-QS-6
Low flow: Precision adjustment for low speed Mid flow: Precision adjustment for average speed
70
Internet: www.festo.com/catalogue/...
GR-H-QS
Dimensions and ordering data For one-way y flow control valve Pneumatic connection QS-3/QS-4 Pneumatic connection QS-6/QS-8 For one-way y flow control valve Pneumatic connection QS-3/QS-4 Pneumatic connection QS-6/QS-8
D1 3.2 3.2 L1 24 24
H 16 19.2
H2 5.7 5.7
GR-H-QS-3-4 GR-H-QS-6-8
GRM Ordering data For one-way flow control valve Pneumatic connection QS-3/QS-4 Pneumatic connection QS-6/QS-8 Cover cap GRK Materials: Polypropylene
GRK Ordering data For one-way flow control valve Pneumatic connection QS-3/QS-4 Pneumatic connection QS-6/QS-8
Internet: www.festo.com/catalogue/...
71
General technical data Connecting thread Valve function Setting component Type yp of mounting g Mounting position Max. tightening torque
M3
M5
Gx
Gy
[Nm]
One-way flow control function Knurled screw Through-hole Front panel mounting Any 0.15 0.9 0.9
0.8
1.2
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Operating and environmental conditions Connecting thread M3 Operating medium Grade of filtration of medium Temperature of medium Ambient temperature [m] [C] [C]
M5
Gx
Gy 40 20 +75 20 +75
G 40 20 +75 20 +75
G 40 10 +60 10 +60
Filtered compressed air, lubricated or unlubricated 5 40 40 40 10 +60 20 +60 20 +60 20 +75 10 +60 20 +60 20 +60 20 +75
M3 2.5
M5 21
Gx 34
G 180
Gy 225
G 517
G 1 100
Standard nominal flow rate qnN [l/min] at 6 bar > 5 bar Connecting thread M3 M5 F1) N2)
1) 2) F: Flow control direction N: Non-return direction
Gx 0 220 0 217
G 0 420 0 780
Gy 0 1 010 0 1 150
G 0 1 620 0 2 760
G 0 3 300 0 4 800
0 29.5 26 27.5
0 94 0 115
72
Internet: www.festo.com/catalogue/...
qnN [l/min]
qnN [l/min]
qnN [l/min]
Internet: www.festo.com/catalogue/...
73
M3
M5
Gx
G Die-cast zinc
Gy
Connecting thread M5
Connecting thread Gx
74
Internet: www.festo.com/catalogue/...
Connecting thread G
Connecting thread G
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Connecting thread M3 M5 Gx G Gy G G
One-way flow control function Part No. Type 15 899 151 213 151 215 6 509 6 308 3 720 2 103 GR-M3 GR-M5-B GR-x-B GRA--B GR-y-B GR- GR-
Internet: www.festo.com/catalogue/...
75
GRM Ordering data For one-way flow control valve Pneumatic connection M5 Pneumatic connection Gx Pneumatic connection G, Gy
Brief description Hex nut M10x1 Hex nut M12x1 Hex nut M20x1.5
GRK Ordering data For one-way flow control valve Pneumatic connection M5 Pneumatic connection Gx Pneumatic connection G, Gy
76
Internet: www.festo.com/catalogue/...
General technical data Screw-in thread Valve function Setting component Noise level Type of mounting Mounting position Max. tightening torque
Gx
Gy
GRE GRU
[Nm]
87 74
90 76
80
20
40
60
Operating and environmental conditions Screw-in thread Operating p g medium Operating pressure Temperature of medium Ambient temperature GRE GRU [bar] [C] [C]
Gx
Gy
Filtered compressed air, lubricated or unlubricated Dried and filtered compressed air, lubricated or unlubricated 0 10 10 70 10 70
Gx 15 10
G 25 25
Gy 50 55
G 75 100
G 170
Standard flow rate qn [l/min] at 6 bar > 0 bar Female thread GRE GRU
Gx 2 520 0 1000
G 2 996 0 1 500
Gy 3 2 000 0 1 700
G 3 3 600 0 4 000
G 0 8 000
Internet: www.festo.com/catalogue/...
77
qn [l/min]
qn [l/min]
1 2 3 4
Metal design GRE 1 Seal 2 Regulating screw 3 Silencer 4 Housing Note on materials Nitrile rubber Brass Bronze Wrought aluminium alloy GRE- y: RoHS-compliant
78
Internet: www.festo.com/catalogue/...
D1 15 18.2 25 27
L1
28.5 34 42 48
6.5 8 8 12
14 17 22 24
16 19.5 25 28 38
14 17 19 24 32
Type GRE-x
Type GRE-
Type GRE-y
Type GRE-
G Part No.
Type
Polymer design 9 516 GRU-x-B 9 517 GRU--B 9 518 GRU-y-B 9 519 GRU--B 9 520 GRU--B
Internet: www.festo.com/catalogue/...
79
General technical data Type Valve function Pneumatic connection Setting component Type of mounting Mounting position Max. tightening torque
GRF-PK-3 One-way flow control function Barbed fitting PK-3 Knurled screw Via through-holes Any 6
[Nm]
11
Operating and environmental conditions Type Operating medium Operating pressure Temperature of medium Ambient temperature [bar] [C] [C]
GRF-PK-3X2
GRF-PK-3 95
GRF-PK-3X2 145
Standard nominal flow rate qnN [l/min] at 6 bar > 5 bar Type GRF-PK-3 GRF 0 45
GRF-PK-3X2 0 45
Standard nominal flow rate qnN [l/min] at 6 bar > 5 bar as a function of turns of the adjusting screw n GRF
qnN [l/min]
80
Internet: www.festo.com/catalogue/...
3 4
Dimensions GRF-PK-3/GRF-PK-3X2
Two one-way flow control valves Part No. Type 4 566 GRF-PK-3X2
Internet: www.festo.com/catalogue/...
81
GRP/GRPO
Flow control valve, operative in both directions GRPO General technical data Type Valve function Pneumatic connection Means of setting Type of mounting Installation position Type of actuation
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
GRP/GRPO-70- x-AL GRP GRPO One-way flow control function Bi-directional flow control function Gx Rotary knob On sub-base Any Manual
GRP/GRPO-160- x-AL
Operating and environmental conditions Type Operating medium Operating pressure Operating pressure 2 > 1 Temperature of medium Ambient temperature [bar] [bar] [C] [C]
GRP/GRPO-70- x-AL
GRP/GRPO-160- x-AL
Filtered compressed air, lubricated or unlubricated, neutral gases 08 GRP: 0 8, GRPO: 0 0.5 10 50 10 50
Standard flow rate qn [l/min] 1 bar > 0 bar Type GRP GRPO
1) 2) D: Flow control direction R: Non-return direction
GRP/GRPO-70- x-AL 0 19 20 60 0 19
GRP/GRPO-160- x-AL 0 38 25 90 0 38
82
Internet: www.festo.com/catalogue/...
qnN [l/min]
qnN [l/min]
Materials Sectional view 1 2 3 Flow control valve 1 2 3 Locking screw Rotary knob Seals Brass Reinforced polyamide Nitrile rubber
Internet: www.festo.com/catalogue/...
83
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
One-way flow control valve Part No. Type 542 022 542 023 GRP-70-x-AL GRP-160-x-AL
Bi-directional flow control valve Part No. Type 542 024 542 025 GRPO-70-x-AL GRPO-160-x-AL
84
Internet: www.festo.com/catalogue/...
Flow control valve, operative in both directions GRPO General technical data Type Valve function Pneumatic connection Means of setting Type of mounting Installation position GRP GRPO
GRP/GRPO-10-PK-3
GRP/GRPO-70-PK-3
GRP/GRPO-160-PK-4
One-way flow control function Bi-directional flow control function Barbed connector PK-3 Barbed connector PK-3 Rotary knob Front panel mounting or on sub-base Any
Operating and environmental conditions Type Operating medium Operating pressure Operating pressure 2 > 1 Temperature of medium Ambient temperature [bar] [bar] [C] [C]
GRP/GRPO-10-PK-3
GRP/GRPO-70-PK-3
GRP/GRPO-160-PK-4
Filtered compressed air, lubricated or unlubricated, neutral gases 06 GRP: 0 8, GRPO: 0 0.5 10 50 10 50
GRP/GRPO-10-PK-3 48
GRP/GRPO-70-PK-3 48
GRP/GRPO-160-PK-4 48
Standard flow rate qn [l/min] 1 bar > 0 bar Type GRP GRPO
1) 2) D: Flow control direction R: Non-return direction
GRP/GRPO-70-PK-3 0 19 20 60 0 19
GRP/GRPO-160-PK-4 0 38 25 90 0 38
Internet: www.festo.com/catalogue/...
85
qnN [l/min]
qnN [l/min]
qnN [l/min]
Materials Sectional view 1 2 3 Flow control valve 1 2 3 4 5 Locking screw Rotary knob Seals Back plate Mounting plate Brass Reinforced polyamide Nitrile rubber Wrought aluminium alloy Wrought aluminium alloy
4 5
86
Internet: www.festo.com/catalogue/...
X = 1.5 10 mm
One-way flow control function Part No. Type 12 743 10 802 12 961 GRP-10-PK-3 GRP-70-PK-3 GRP-160-PK-4
Bi-directional flow control function Part No. Type 13 229 10 803 13 230 GRPO-10-PK-3 GRPO-70-PK-3 GRPO-160-PK-4
Internet: www.festo.com/catalogue/...
87
APL-2N-GRPX2
Ordering data For no. of flow control valves 1 Hole [mm] 22.5 Product weight [g] 16 Part No. 10 391 Type APL-2N-GRP
2 x 22.5
22
10 392
APL-2N-GRPX2
88
Internet: www.festo.com/catalogue/...