0 évaluation0% ont trouvé ce document utile (0 vote)
48 vues7 pages
The document provides instructions for setting up and using a Bluetooth headset. It describes connecting the headset to a phone via Bluetooth pairing, operating the call and volume buttons, charging the battery using a micro USB port, and specifications like talk time and battery life. Safety instructions, fitting the headset, troubleshooting tips, and customer support contact information are also included.
The document provides instructions for setting up and using a Bluetooth headset. It describes connecting the headset to a phone via Bluetooth pairing, operating the call and volume buttons, charging the battery using a micro USB port, and specifications like talk time and battery life. Safety instructions, fitting the headset, troubleshooting tips, and customer support contact information are also included.
The document provides instructions for setting up and using a Bluetooth headset. It describes connecting the headset to a phone via Bluetooth pairing, operating the call and volume buttons, charging the battery using a micro USB port, and specifications like talk time and battery life. Safety instructions, fitting the headset, troubleshooting tips, and customer support contact information are also included.
TAKE A GOOD LOOK Be safe! Please read the safety guide before using your new headset. MICRO USB CHARGING PORT Use with the AC wall charger: 1 hour before rst use 2 hours (100% charge) Do not use headset while charging VOLUME BUTTONS Volume: up/down (tap + or buttons per level change) LED Charging (solid red) Low battery (3 red ashes at powering on) On a call (blue ash every 2 seconds) Missed call (purple ashes. Repeats for 5 minutes or until cancelled). Pairing mode (repeating red/blue ashes) CALL BUTTON Take a call or end it (1 tap) Redial (2 taps) Initiate phones voice-dialing (2 second press until tone is heard) Reconnect lost Bluetooth connection (1 tap if the headset doesnt automatically reconnect) Activate pairing mode after initial set up (press until red/blue LED ashes) Cancel missed call LED (1 tap) POWER SWITCH On (slide to reveal black) Off (slide to reveal red) CONNECT TO YOUR PHONE Pairing is the set-up process of introducing your headset to your phone. Before using your headset for the rst time, you must pair it with your Bluetooth-enabled phone. Pairing is a one-time process unless your phone loses the connection or you want to pair a new phone. PLT_MLXX 1. READY Activate the Bluetooth feature on your phone, then get phone to add / search / discover new Bluetooth devices. Phones Have Different Menus to Select From: iPhone: Settings > General > Bluetooth > On (starts the search for devices) BlackBerry smartphone: Settings/options > Bluetooth: On > Search for devices VIDEO TUTORIAL FOR USA: www.plantronics.com/pairing 2. SET First Time, Right out of the Box: With headset turned off, activate Bluetooth pairing mode by sliding Power switch on. The LED ashes red/blue to indicate pairing mode. Pairing New Phone/Reconnecting Original: With headset turned off, slide Power switch on. Press and hold the Call button until the LED ashes red/blue. 3. CONNECT Select PLT_MLXX from the list of Bluetooth devices shown on your phone. If phone asks for a passcode, enter four zeros (0000). You may see **** on screen. Some phones also ask to conrm headset connection after pairing. Headset LED will stop ashing red/blue once successfully paired/connected. You can now make a call using your phones keypad or voice-dialing feature. FIT EITHER EAR 2 1 Left ear Right ear TIPS Understand the Tones You Hear: This headset beeps different tones to advise you on what it is doing. Usually, a high tone requires you to act (e.g. you lost the Bluetooth connection or need to recharge battery) but a low tone is just a reaction to you pressing a button (e.g. volume changes, call start/end). Stay Near Your Phone: Bluetooth has a working range of up to 30 feet between the phone and headset before audio degrades and the connec- tion is lost. Know How to Reconnect: Your headset tries to reconnect a lost connection. If it cant, then tap the Call button once or manually reconnect via the phones Bluetooth device menu. SPECIFICATIONS Talk Time Up to 7 hours Standby Time Up to 8 days Operating Distance (Range) Up to 33 feet (10 meters), Class II Headset Weight 11.5 grams Charge Connector Micro USB charging Battery Type Rechargeable non-replaceable lithium ion polymer Charge Time (Maximum) 90 minutes for full Power Requirements 5V DC 180mA Bluetooth Version Bluetooth v2.0 Bluetooth Proles Hands-Free (HFP) Prole 1.5 and Headset (HSP) Prole 1.1 Operating Temperature 32F - 104F (0 - 40C) Storage Temperature 32F - 104F (0 - 40C) Charging Temperature 32F - 104F (0 - 40C) NEED MORE HELP? Dont return to the store - call our friendly customer support team at 1-866-363-2583 (USA) or visit plantronics.com/support for local numbers outside the US. 2011 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. U.S. Patents Pending. 85663-01 EN-US Z109 N10687
Iphone 14 User Guide: A Complete Step by Step Picture Manual for Beginners and Seniors (The Most Comprehensive and Intuitive Guide on How to Use Your New Iphone 14 With Tips and Tricks)