Remark = " Syntax rules for the DC warning file ----------------------------------- There are two types of records in the file: - Identification of the NE AS type to which the commands belong. - Records with dangerous command and associated warning text. Empty lines outside strings are ignored. The FileInfo record is optional. Only one record is allowed. If it is present, it must be placed first in the file, and NeAsType must be present. A Remark is optional. No checks are done on the content of NeAsType. Command records must contain Command and WarningText, in that order. A Remark is optional and can be placed anywhere within the record. The commands, and their associated warning text, for this --------------------------------------------------------- particular file is suggested as a starting kit for any dc file ------------------------------------------------------------- created for AXE. ---------------- Therefore, when making a dc file for an NE-AS type, make a copy of this file and edit the file by adding the commands for the local needs. Keep the commands included at delivery, including the AP commands, in particular the command 'mml' but feel free to modify the warning texts as appropriate.
" FileInfoEnd EntryBegin Command = "afpfti" WarningText = "This command shall not be used by the operator as it will only make APG initiate a file notification that the OSS will not ract to. The file will not be transferred to OSS. Use 'ftp' instead. " EntryEnd EntryBegin Command = "ANBAI" WarningText = "This command may cause heavy traffic loss if analysis tables are incomplete." EntryEnd EntryBegin Command = "CACLS" WarningText = "Initial Load Only. Double Check Date, Time and Date Parameters. Affects Tariff." EntryEnd EntryBegin Command = "IOREI" WarningText = "WARNING. May cause System Restart. Contact OSS before use. See command description for details." EntryEnd EntryBegin Command = "mml" WarningText = "This command shall not be used by the operator unless direct AP node (A or B) access was requested. For exit to MML mode from AP mode invoked by the command APLOC, use command 'exit' instead." EntryEnd EntryBegin Command = "SYBUP" WarningText = "This Command will perform an EXCHANGE DUMP! Are you sure?" EntryEnd EntryBegin Command = "SYREI" WarningText = "WARNING! SYSTEM RESTART !! Are you really sure?" EntryEnd EntryBegin Command = "SYRTS" WarningText = "WARNING. May cause immediate Restart." EntryEnd EntryBegin Command = "TEST" WarningText = "Use of this command 'TEST SYSTEM' may cause serious disturbances!" EntryEnd