Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure 1
Trainer Preparation Guide for Course 6421B:
Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure
2 Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure Required Materials to Teach This To teach this course, you need the following materials: Course Handbook Course Companion Content Microsoft Hyper-V Classroom Setup Guide. Course virtual machines.
Important: It is recommended that you use Microsoft Office PowerPoint 2003 to display the slides for this course. If you use PowerPoint Viewer or an earlier version of PowerPoint, all the features of the slides might not be displayed correctly.
Prerequisite Knowledge to Teach This Course To present this course, you must have: Extensive hands-on experience with Windows Server operating systems. Proficient hands-on experience with TCP/IP including IPv4 and IPv6. Proficient with new Windows Server 2008 and Windows Server 2008 R2 Sp1 features, including NAP, DirectAccess and BranchCache. Proficient experience with IPsec and general network security. Extensive hands-on experience managing and troubleshooting server roles such as DNS, DHCP, and WINS.
Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure 3 Preparation Tasks Complete the following tasks to prepare for this course. Courses or Workshops It is highly recommended that you audit and are familiar with the content within the following courses or workshops: Course 6420B: Fundamentals of a Windows Server 2008 Network Infrastructure and Application Course 6425C: Configuring Windows Server 2008 Active Directory Domain Services
Exams To identify your technical proficiency with the content of this clinic, it is highly recommended that you pass the following exams: Exam 70-642: TS: Windows Server 2008 Network Infrastructure, Configuring
Technical Preparation Activities It is highly recommended that you complete the following technical preparation activities: Read the additional readings and references included on the Course Web site. Practice using the Microsoft product(s) and tools associated with this course. Practice setting up the classroom by following the instructions in the Microsoft Hyper-V Classroom Setup Guide. Review the Windows Server 2008 Web site at http://www.microsoft.com /windowsserver2008 for updated information. Review the product error log, which is available in the Microsoft Download Center.
4 Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure Instructional Preparation Activities It is highly recommended that you complete the following instructional preparation activities: Preparation activities Read the About This Course at the beginning of the Course handbook for the course. Walk through the Introduction slide deck for the course. Walk through each module presentation slide deck and read the corresponding Instructor Notes (located in the notes view of the presentation slide deck) for the module. Note that additional hidden slides are used in each slide deck to accommodate the amount of Instructor Notes information for a given topic. Familiarize yourself with the Course handbook and the Course Companion Web site on http://www.microsoft.com/Learning. Make note of when to direct students' attention to the Course Companion Web site for further learning support. Practice presenting each module: Identify the key points and must-know information for each topic. Perform each demonstration and hands-on lab. Anticipate the questions that students might have. Identify examples, analogies, impromptu demonstrations, and additional delivery tips that will help to clarify module content and provide a more meaningful learning experience for your specific audience. Note any problems that you might encounter during a demonstration or a lab exercise, and determine a course of action for how you will resolve the problems in the classroom. The lab answer keys are located in the end of the instructor and student manuals. Work through the Module Review and Takeaways section at the end of each module and determine how you will use this section to reinforce student learning and promote knowledge transfer to on-the-job performance. Also in Module 5 there is a demonstration on Installing and configuring Direct Access. The demonstration utilizes pre-recorded demonstrations available for download on the companion content web site. You should download and become familiar with them as part of your preparation activities. Customize and enhance your instructor notes. Consult the MCT newsgroup for additional tips and strategiesposted by your fellow MCTsfor teaching the course. Review the updated information about the Microsoft Certification Program on the Microsoft Learning Certifications Web site.
Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure 5 Instructor Computer Setup Set up the instructor computer by following the setup instructions in the Microsoft Hyper-V Setup Guide document. This document provides hardware requirements for the instructor computer in addition to detailed setup instructions. Course Timing The following schedule is an estimate of the course timing. Your timing might vary. Every student might not finish every lab. Use your judgment to set a reasonable time to move on to the next module. Day 1 Start End Module 9:00 9:30 Introduction 9:30 10:30 Module 1: Planning and Configuring IPv4 10:30 10:45 Break 10:45 11:30 Lab: Planning and Configuring IPv4 11:30 12:15 Module 2: Configuring and Troubleshooting DHCP 12:15 1:15 Lunch 1:15 1:45 Module 2: Configuring and Troubleshooting DHCP 1:45 2:45 Lab: Configuring and Troubleshooting the DHCP Server Role 2:45 3:00 Break 3:00 4:15 Module 3: Configuring and Troubleshooting DNS 4:15 5:15 Lab: Configuring and Troubleshooting DNS
6 Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure Day 2 Start End Module 9:00 9:30 Day 1 review 9:30 10:15 Module 4: Configuring and Troubleshooting IPv6 TCP/IP 10:15 10:30 Break 10:30 11:00 Lab A: Configuring an ISATAP Router 11:00 11:30 Module 4: Configuring and Troubleshooting IPv6 TCP/IP 11:30 12:00 Lab B: Converting the Network to Native IPv6 12:00 1:00 Lunch 1:00 2:00 Module 5: Configuring and Troubleshooting Routing and Remote Access 2:00 3:00 Lab A: Configuring and Managing Network Access 3:00 3:15 Break 3:15 4:15 Module 5: Configuring and Troubleshooting Routing and Remote Access (continued) 4:15 5:15 Lab B: Configuring and Managing DirectAccess
Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure 7 Day 3 Start End Module 9:00 9:30 Day 2 review 9:30 10:45 Module 6: Installing, Configuring, and Troubleshooting the Network Policy Server Role Service 10:45 11:00 Break 11:00 12:00 Lab: Configuring and Managing Network Policy Server 12:00 1:00 Lunch 1:00 2:15 Module 7: Implementing Network Access Protection 2:15 3:15 Lab: Implementing NAP into a VPN Remote Access Solution 3:15 3:30 Break 3:30 4:15 Module 8: Increasing Security for Windows Servers 4:15 5:00 Lab: Increasing Security for Windows Servers
8 Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure Day 4 Start End Module 9:00 9:30 Day 3 review 9:30 10:30 Module 9: Increasing Security for Network Communication 10:30 10:45 Break 10:45 11:30 Lab: Increasing Security for Network Communication 11:30 12:15 Module 10: Configuring and Troubleshooting Network File and Print Services 12:15 1:15 Lunch 1:15 2:15 Module 10: Configuring and Troubleshooting Network File and Print Services 2:15 3:15 Lab: Module 10: Configuring and Troubleshooting Network File and Print Services 3:15 3:30 Break 3:30 4:30 Module 11: Optimizing Data Access for Branch Offices 4:30 5:00 Lab: Implementing DFS
Trainer Preparation Guide for Course 6421B: Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure 9 Day 5 Start End Module 9:00 9:30 Day 4 review 9:30 10:00 Module: Optimizing Data Access for Branch Offices (continued) 10:00 10:30 Lab: Implementing BranchCache 10:30 10:45 Break 10:45 11:45 Module 12: Controlling and Monitoring Network Storage 11:45 12:30 Lab: Controlling and Monitoring Network Storage 12:30 1:30 Lunch 1:30 2:10 Module 13: Recovering Network Data and Servers 2:10 2:55 Lab: Recovering Network Data and Servers 2:55 3:10 Break 3:10 4:10 Module 14: Monitoring Windows Server 2008 Network Infrastructure Servers 4:10 4:55 Lab: Monitoring Windows Server 2008 Network Infrastructure Servers