0 évaluation0% ont trouvé ce document utile (0 vote)
87 vues4 pages
Don't allow anyone else to use your password because you might get blamed. Don't touch a computer that is being used by someone else. Label practically everything. Clearly label all equipment with its hostname or other identifier. Do not run any cables across the floor, or suspended in a catenary.
Don't allow anyone else to use your password because you might get blamed. Don't touch a computer that is being used by someone else. Label practically everything. Clearly label all equipment with its hostname or other identifier. Do not run any cables across the floor, or suspended in a catenary.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme DOCX, PDF, TXT ou lisez en ligne sur Scribd
Don't allow anyone else to use your password because you might get blamed. Don't touch a computer that is being used by someone else. Label practically everything. Clearly label all equipment with its hostname or other identifier. Do not run any cables across the floor, or suspended in a catenary.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme DOCX, PDF, TXT ou lisez en ligne sur Scribd
your password because you might get blamed for something they do. 2. Only use the Internet with permission and remember that your Email address identifies who you are. 3. Don't touch a computer that is being used by someone else and always ask before logging off an unused computer. 4. Ask before you print and always put your name on your work. 5. No food and drink in computer rules because it can damage the equipment 6. Sit properly and comfortably and tell your teacher if you regularly get headaches after using computers. 7. Treat the equipment with respect and always report any damaged equipment. 8. Transfer data files but not programs Large files will be deleted. Do not attempt to install software on the network. Computer Room RULES Copyright (C) 1996, 2006 JXH Consulting <jxh@jxh.com> Please give proper credit when using this information. 1. Label practically everything. • Clearly label all equipment with its hostname or other identifier, on both the front and back panels. • Label all peripherals with the hostname and device name or number (e.g. host:c1t2). • Label all cords and cables greater than 1 meter long, at both ends, with the name of the host or equipment, the port number on the equipment if more than one (e.g. host:le0), and the type of cable if ambiguous (e.g. "RS-232" on RJ-11 cords). • Label phone cords with their type and group-number (e.g. "Modem 1", "ISDN 3") at both ends, and each jack with its directory number. • Label data circuit cords (e.g. RJ-48S), at both ends, with the name of the far end of the circuit (e.g. "Trumbull"), and each jack with its circuit identifier. 2. Dress all cords and cables neatly. • Do not run any cables across the floor, or suspended in a catenary. • Run all cables inside an approved cable duct, even under a raised floor. • Support all cables greater than 1 meter long at regular intervals along their length, not more than 0.5 meter apart. Tie cables to fixed supports near the ends. • Run cables between enclosures only through the intended entry areas. Close all doors and panels afterward. • Do not run "temporary" cords or cables in violation of these rules, even for an instant. GET A LONGER CABLE. Where electrical specifications limit cable length (e.g. SCSI), relocate the equipment. 3. Install all equipment in fixed racks, if possible. • Obtain rack-mount kits, if not supplied. • Pay attention to unit boundaries (1.75"); the holes are not evenly spaced. 4. Remove all unused equipment from the racks. 5. Do not store equipment or materials in the computer room. 6. Keep all surfaces neat and clean at all times.
A Computer Laboratory Is A Room That Is Specially Designed and Prepared To Facilitate The Installation of Computers and To Provide A Safe and Conducive Environment For Using The Computers