INSTRUCTIONS: This is Self-Check Instrument will give the trainer necessary date or information which is essential in planning training sessions. Please check the appropriate box of your answer to the question below CORE COMPETENCIES CAN I? YES NO 1. Plan and prepare for installation 1.1. Plan and prepare to ensure OH&S policies and procedures are followed, the work is appropriately sequenced in accordance with requirements
X
1.2 Consult an appropriate personnel to ensure if the work is coordinated effectively with others involved on the work site
x 1.3 Obtained devices / systems in accordance with established procedures and to comply with requirements X 1.4 Locate in which devices / systems are to be installed is determined from job requirements X 1.5 Complete the work with necessary materials that are obtained in accordance with established procedures and checked against job requirements X 1.6 Carry out the tools, equipment and testing devices needed to the installation of work that are obtained in accordance with established procedures and checked for correct operation and safety x
1.7 Check preparatory work to ensure no unnecessary damage has occurred and complies with requirements x 2. Install equipment / device / system 2.1 Follow OH&S policies and procedures for installing devices/systems
X 2.2 Install devices / systems in accordance with requirements, without damage or distortion to the surrounding environment or services
X 2.3 Carry out variation to devices / systems installation in accordance to customer/client requirements X 2.4 Terminate and connect devices / systems in accordance with requirements X 2.5 Respond to unplanned events or conditions in accordance with established procedures X 2.6 Obtain approval in accordance with established procedures from appropriate personnel before any contingencies are implemented x 2.7 Check the quality of the work that are undertaken in accordance with established procedures x
3. Conduct test 3.1 Follow OH&S policies and procedures X 3.2 Check circuits and systems as being isolated where necessary by using specified testing procedures X 3.3 Conduct the test to protect against loss or damage in accordance with established procedures when parts or connections of the installation or service are removed x 3.4 Respond unplanned events or conditions in accordance with established procedures X 3.5 Obtain approval in accordance with established procedures from appropriate personnel before any contingencies are implemented
X 3.6 Test devices / systems and/or installation to determine whether it conforms to requirements
x 3.7 Remove parts, and/or connections for the purpose of testing are returned to pre-test conditions in accordance with established procedures
x x 3.8 Undertake final inspections to ensure the installed devices / systems conforms to requirements
X 3.9 Forward documentation in relation to the test to appropriate personnel and/or authority in accordance with requirements x
Form 1.2 Evidence/ Proof of Current Competencies Current competencies Proof/Evidence Means of validating 1.1 Plan and prepare to ensure OH&S policies and procedures are followed, the work is appropriately sequenced in accordance with requirements Project such as presentation/ reporting the importance of OH&S Quizzes or Recitation about policies and procedures of OH&S 1.6 Carry out the tools, equipment and testing devices needed to the installation of work that are obtained in accordance with established procedures and checked for correct operation and safety Demonstration on the correct establishment of tools and testing devices. Actual presentation on the establishment of tools and testing devices. 2.1 Follow OH&S policies and procedures for installing devices/systems Allow students to watch videos and pictures with the set of instructions on how OH&S are being applied. Actual installing of devices/systems in accordance to the videos and pictures they have watched. 2.4 Terminate and connect devices / systems in accordance with requirements Allow students to watch videos and pictures with the set of instructions on how to terminate and connect devices. Presentation on how to terminate and connect devices/ systems. 3.1 Follow OH&S policies and procedures Project such as presentation / reporting in how the OH&S procedure is done. Quizzes or Recitation about policies and procedures of OH&S 3.7 Remove parts, and/or connections for the purpose of testing are returned to pre-test conditions in accordance with established procedures
Presentations of videos and actual demonstration on how to assemble and disassemble the parts of a certain device. Actual removing and connecting of parts and/or connections of the device with a given procedures.
Identifying Training Gaps
From the accomplished Self-Assessment Check (Form 1.1) and the evidences of current competencies (Form 1.2), the Trainer will be able to identify what the training needs of the prospective trainee are.
Form 1.3 Summaries of Current Competencies Versus Required Competencies Required Units of Competency/Learning Outcomes based on CBC Current Competencies Training Gaps/Requirements 1. Plan Training Session 1.1 Plan and prepare to ensure OH&S policies and procedures are followed, the work is appropriately sequenced in accordance with requirements To ensure OH&S policies and procedures are followed the work is appropriately sequenced in accordance with requirements
1.2 Consult an appropriate personnel to ensure if the work is coordinated effectively with others involved on the work site
1.3 Obtained devices / systems in accordance with established procedures and to comply with requirements
1.4 Locate in which devices / systems are to be installed is determined from job requirements
1.5 Complete the work with necessary materials that are obtained in accordance with established procedures and checked against job requirements
1.6 Carry out the tools, equipment and testing devices needed to the installation of work that are obtained in accordance with established procedures and checked for correct operation and safety
1.7 Check preparatory work to ensure no unnecessary damage has occurred and complies with requirements
2.Install equipment / device / system 2.1 Follow OH&S policies and procedures for installing devices/systems
2.2 Install devices / systems in accordance with requirements, without damage or distortion to the surrounding environment or
services 2.3 Carry out variation to devices / systems installation in accordance to customer/client requirements
2.4 Terminate and connect devices / systems in accordance with requirements
2.5 Respond to unplanned events or conditions in accordance established procedures
2.6 Obtain approval in accordance with established procedures from appropriate personnel before any contingencies are implemented
2.7 Check the quality of the work that are undertaken in accordance with established procedures
3. Conduct test 3.1 Follow OH&S policies and procedures
3.2 Check circuits and systems as being isolated where necessary by using specified testing procedures
3.3 Conduct the test to protect against loss or damage in accordance with established procedures when parts or connections of the installation or service are removed
3.4 Respond unplanned events or conditions in accordance with established procedures
3.5 Obtain approval in accordance with established procedures from appropriate personnel before any contingencies are implemented
3.6 Test devices / systems and/or installation to determine whether it conforms to requirements
3.7 Remove parts, and/or connections for the purpose of testing are returned to pre- test conditions in accordance with established procedures
3.8 Undertake final inspections to ensure the installed devices / systems conforms to
requirements 3.9 Forward documentation in relation to the test to appropriate personnel and/or authority in accordance with requirements
Self- Check of 1.2-4
Multiple Choice: Choose the correct letter that best describe the statement. Write your answer in capital letter on your answer sheet.
1. The type of bus used for laptop computers .? a. PCMCIA (Personal Computer Memory Card International Association) b. PCMCAI (Personal Computer Memory Card Association Incorporated) c. PCI (Peripherals Components Interconnect) d. AGP (Accelerated Graphics Port)
2. An expansion card that facilitates the input and output of audio signals to/from a computer under control of computer programs.
a. Network Card b. PCI c. Sound Card d. Video Card
3. A connector that is used for connecting some keyboards and mice to a PC compatible computer system. a. USB Connector b. IDE Cable c. Sata Connector d. PS/2
4. An expansion card that allows computers to communicate over a computer network.
a. Network Card b. PCI c. Video Card d. Sound Card
5. A serial bus interface standard for high-speed communications and isochronous real-time data transfer, frequently used in a personal computer.
a. PCI b. AGP c. Firewire d. Sata Cable
Self- Check of 1.2-4
Multiple Choice: Choose the correct letter that best describe the statement. Write your answer in capital letter on your answer sheet.
1. The type of bus used for laptop computers .? a. PCMCIA (Personal Computer Memory Card International Association) b. PCMCAI (Personal Computer Memory Card Association Incorporated) c. PCI (Peripherals Components Interconnect) d. AGP (Accelerated Graphics Port)
2. An expansion card that facilitates the input and output of audio signals to/from a computer under control of computer programs.
a. Network Card b. PCI c. Sound Card d. Video Card
3. A connector that is used for connecting some keyboards and mice to a PC compatible computer system. a. USB Connector b. IDE Cable c. Sata Connector d. PS/2
4. An expansion card that allows computers to communicate over a computer network.
a. Network Card b. PCI c. Video Card d. Sound Card
5. A serial bus interface standard for high-speed communications and isochronous real-time data transfer, frequently used in a personal computer.
a. PCI b. AGP c. Firewire d. Sata Cable
ANSWER KEY Self- Check of 1.2-4
1. A 2. C 3. D 4. C
Self- Check of 1.2-5 A. IDENTIFICATION. Direction: Identify the Precautions and Procedures write TRUE if the statement is correct and FALSE if the statement is wrong.
________1. Protective Eyewear enclose or protect the nose area in order to prevent particulates, infectious fluids, or chemicals
________2. Uni-tester is an electronic device for measuring instrument that combines several measurement and functions
________3. Fliers are hand tool used to hold objects firmly for beding or physical Compression
________4. A screw is a tool for driving screws and often rotating other machine elements with the mating drive system
________5. A Soldering Gun is a tool for soldering metals using tin-based solder to achieve a highly conductive contact
B. MATCHING TYPE Direction: Select your answer on the choices below that will correspond on the statement. Write the letter of your answer on the space provided.
1. Mirror 2. Flash light 3. Gloves 4. Tweezers 5. IC Insertion and Extracting Tool ______ 1. A hand held portable electric light source ______ 2. Used for extracting and inserting BIOS Chip ______ 3. Used for inspecting peripherals ______ 4. Intended for picking up objects too small for human hands ______ 5. Used for hand protection