The document describes the LTRON-AML microcontroller-based auto-manual loader. It has the following key features:
1. It is compact in size, microcontroller-based, and programmable on-site for various measurement applications.
2. It accepts 4-20mA input and can operate in auto or manual mode for valve positioning.
3. It has options for isolated re-transmission output, alarm/control functions, and communication ports.
4. The document provides details on the instrument's programming, calibration, and configuration modes for setting up ranges, decimal points, and other parameters.
The document describes the LTRON-AML microcontroller-based auto-manual loader. It has the following key features:
1. It is compact in size, microcontroller-based, and programmable on-site for various measurement applications.
2. It accepts 4-20mA input and can operate in auto or manual mode for valve positioning.
3. It has options for isolated re-transmission output, alarm/control functions, and communication ports.
4. The document provides details on the instrument's programming, calibration, and configuration modes for setting up ranges, decimal points, and other parameters.
The document describes the LTRON-AML microcontroller-based auto-manual loader. It has the following key features:
1. It is compact in size, microcontroller-based, and programmable on-site for various measurement applications.
2. It accepts 4-20mA input and can operate in auto or manual mode for valve positioning.
3. It has options for isolated re-transmission output, alarm/control functions, and communication ports.
4. The document provides details on the instrument's programming, calibration, and configuration modes for setting up ranges, decimal points, and other parameters.
Microcontroller-based Site Programmable program it, fit it, forget it! ompact Si!e - "#$"#$%&& mm onl' mA input (-)e' membrane )e'board for programming *( +dc output to po,er transmitters -solated (-*& mA manual loader output -ntroduction LTRON-AML are part of Lectroteks LTRON-series MICROCONTROLLR-based Process Measurement and Control products. The instruments are innoatie in terms of compact si!e "#$% &IN ' #$( &IN ersions) and cost-effectie* +et full-featured in terms of ease of use* pro,rammabilit+* optional communication port and re-transmission si,nal output. It has full ke+board based operation for ran,es* decimal point* selection and calibration. The LTRON--MLaccepts %-./ m- input and is useful for all ,eneral purpose measurement* 0ale positionin, in auto or manual mode. The instruments compact and hi,hl+ functional fascia consists of a % di,it 1-se,ment L2& displa+ and %-ke+ membrane ke+board for pro,rammin,$parameter selection purposes. The enclosure is a 345345#// mm "67&) si!ed en,ineerin, plastic enclosure suitable for mountin, in panel cutout of 3. 5 3. mm &IN si!e* ia . clamps. The instrument has an IP-8% front facia and IP%/ rear. .npac)ing, installallation 9npack the instrument and check for presence of this Operatin, Manual* pair of clamps and ph+sical dama,e: if an+. Report to the dealer for an+ shorta,es or ;arrant+ serice$replacement. Install the instrument on the panel in a cutout as per the instrument si!e purchased* ;ith the help of mountin, clamps supplied. Connect po;er suppl+ as ordered and marked on the instruments label. -lthou,h the instrument has an internal .8/ m- fuse* ;ire the instrument preferabl+ throu,h an e5ternal fuse and a /.8- MC< for additional protections a,ainst shorts$oer current protection. The instrument displa+ comes on ;hen po;er on is done. In case of no displa+ condition* check po;er suppl+ cord or connection point* or instruments internal fuse "if blo;n* replace). In case of further difficult+* please contact dealer. Operating Manual LECTROTEK SP/-0-AT-ONS -nputs1ranges 2site configurable3 see table belo, Input Ran,es "default) Resolution %-./ m-dc "linear$s=uare root) / to 3333 >$- # di,it Accurac' >$- /..8?@A >$- # di,it 4ispla' %di,its* 1 se,ment L2&* red* in #%.. mm hei,ht. 5e'board % ke+ membrane ke+board alibration @rom front ke+board * soft;are based Po,er Suppl' .%/$##/ 0 -C >$- #/?* 8/>$-B 7!* .8/m- fuse "internal). ontrol1Alarm function %-./m- output Au$ po,er output .%0dc* B/ m- output to po;er transmitters "standard feature). 6iring Acre;ed terminals* ma5. ..8 mm ;ire si!e /nclosure -<A* 345345#// mm or 345%(5.// "67&)* ;ith . mountin, clamps Panel utout 3.53. mm or 3.5%( mm "as ordered C see Orderin, Information). /n7ironmental -mbient temperature 8/ oC 8umidit' 3/? R7 ma5imum* non-condensin, ommon terminolog' -s abbreiations for commonl+ used instrument terms are referred to in this manual* a definition of these as used for LTRON-%/ is ,ien belo;D P0D Process 0alue such as the temperature or process ariable under measurement. APD Aet point or set alue* the alarm or trip limit point settable in an+ control function OPD Output* it is on-off t+pe as referred to LTRON-%/ 7ID 7i,h Limit* or a setpoint condition in ;hich rela+ is ener,i!ed in P0 less than AP condition* and de- ener,i!es ;hen P0 e5ceeds AP. LOD Lo; Limit* opposite to 7I limits. - setpoint condition in ;hich rela+ is ener,i!ed in P0 ,reater than AP condition* and de-ener,i!es ;hen P0 fall belo; AP. E-PD On-off rela+ h+sterisis* in LTRON-%/* this is site chan,eable. Aettin, rela+ differential is a compromise to be decided b+ user bet;een on-off dead-band and rela+$contactor life* as too narro; a band causes fre=uent rela+ operation* and hence lo;er contactor life. Programming The instruments can be operated in diided in B modesD Operation Mode T9is mode operates t9e LTRON-AML, ranges decimal point: alibration Mode .se t9is mode to calibrate t9e instrument;s input1output - - Operation Mode 5/<=OAR4 4-SPLA< S8O6S Normal 4ispla' LTRON normall+ displa+s the process alue on its %-di,it displa+. In case sensor$input is open or not connected* displa+ sho;s OP/n 5e'board consists of ( )e's S "Acroll @or;ard) "&ecrease) "Increase) "Acroll <ack;ard) #.B.% Process Value
In this mode %-./Ma output is proportional to process alue -MPORTANT NOT/D -N ALL S/T-ONS* 672N M9LTIPL2 F2G @9NCTIONA -R2 R2H9IR2&* T72 @IRAT F2G IA TO <2 PR2AA2& @IRAT* -N& F222PINE IT PR2AA2&* T72 A2CON& F2G 7-A TO <2 T72N PR2AA2&* TO EO INTO T72 P-RTIC9L-R MO&2. 2.E. ;hen S > ke+ press instruction is ,ien* press A ke+ first* and keepin, it pressed* press the ke+ ;ith another fin,er to ,et into setpoint chan,e mode. -- onfiguration Mode 5e'board operation 4ispla' s9o,s "se=uentiall+) 6hat is its functionI In this mode user can chan,e units input* ran,e hi,h* ran,e lo;* resolution "d.p.) and communication serial number. To ,et into this mode* press 1. S > ke+s first. 2. Then* press S > to,ether. B. Instrument sho;s the input confi,ured at present. %. Press S ke+ to select Ran,e 7i,h. 8. Press S ke+ a,ain* to select Ran,e lo;. 4. Press S ke+ to chan,e &.P 1. Press S Fe+ to displa+$chan,e the serial no. 8. Eet out of the mode b+ pressin, S > ke+s a,ain. Atep # C Press S > ke+s Atep . C Press S > ke+s. Atep B CC Press S ke+ to chan,e Ran,e 7i* Ran,e Lo;* select decimal point. Atep 8 C Press S* for serial no. Mode. Press S a,ain to ie; present serial no.* chan,e to re=uired sr. no. b+ * ke+s) M-IP (Linear nput) Rn,7 " Ran,e 7i,h -nnunciation) #././ "7i,h 0alue chan,e b+ *) Rn,L " Ran,e Lo; -nnunciation) ///./ "Lo; 0alue chan,e b+ *) &P (Select decimal by *) Arno. "Aelect this displa+ b+ S) ///#"Press S* reads sr. no.) /.%/ "9se *to adJust) --- -nput alibration Mode 5e'board operation 4ispla' s9o,s 6hat is Input Calibration modeI In this mode user can check or recalibrate the LTRON-%/ at site To ,et into this mode* press 1. S > ke+s first. .. Press S ke+ successiel+ to select Kero* Apan* 3. Eet out of the mode b+ pressin, S > ke+s a,ain. %. Connect calibration source m- at the I$P terminal. Atep# C Press S > ke+. Top displa+ sho;s K2RO. Atep . C Press ke+ to see input at !ero calibration side Atep B C Press *ke+s to adJust errors if an+. Atep %CPress * displa+s AP-n. Atep 8 C Repeat calibration for AP-N* ,ie full span input and adJust error b+ *ke+s. 25ample ,ien belo; is for an m- K2RO (Zero side I/P calibration). ///.B (4.00mA input feed to instrument ;ith an error of 0.) ///./ (0. error corrected ) AP-N (Span side I/P calibration) #/../ (!0"a input feed to instrument) #//./ (After ad#ustin$ error) Huit the calibration mode b+ pressin, S > ke+s to,ether. -+ Output alibration Mode 5e'board operation 4ispla' s9o,s 6hat is Output Calibration I In this mode user can calibrate the LTRON-aml isolated re- transmission si,nal output to %- ./ m- "or chan,e it to /-./ m-.) To ,et into t9is mode, press 1. S > ke+s to,ether. 2. Eet out of the mode b+ pressin, S > ke+s a,ain. Atep #- Connect a &MM at the Ltrons output terminals* to read the retransmission output. Atep . C Press S > ke+s to,ether. &ispla+ sho;s nA&(: Atep B C Press *ke+s to adJust m- output to % Ma or / m-. Atep % C Press ke+ to displa+ the span side output "nA*&). Atep 8 C Confirm instrument output is ./ m-* -dJust m- error if an+ b+ *ke+s. 25ample ,ien belo; is for an RT& input confi,ured LTRON-%/ n-/%(Zero side %/P calibration). n-./(Span side %/P calibration). P P % N N C N O P # P . P B N C N C N C C N O N O N O O A 9 P P L G A N - - - R < E T C % - . / m - - > - > ? + 4 O 9 T - P t # / / > > . 6 I R 2 T R - N A M I T T 2 R I N P 9 T * ( + 4 O 1 P % - . / m - I n p u t > > > L T R O N L < F 4 " & - * @ & + A @ # ? ( B * % " % & % % % * % B % ( * * * % * & % " % A % @ % # % ? * B * ( * ? * # / L T R O N ( & = T A & CCCD- 0or ma input connect %? o9m bet,een terminal %" and *% 0or ?7 4c to pin no *( and negati7e to pin no *? 0or cu-?B connect same as pt -%&& LTRON-(& 6-R-NE 4-AERAM 2.N.S/4 OPT-ONS 6-LL =/ -N =LAN5 .TO.TS3 Notes #. NC-P#-NO denote Normall+ Closed$Phase"Pole)$Normall+ open conditions of the rela+s. "and so on for . nd -% th rela+s as ordered). These can be confi,ured in failsafe mode "NO contacts can be pro,rammed and made to be ener,i!ed as per 7i,h or Lo; limit re=uirement Csee Aection II C Operation ). .. Terminals shall be proided as per order for no. of rela+s and optional feature "Retransmission and Communication port) F.-5 AL-=RAT-ON MO4/ 2Fuic)-al3 The LTRON-%/ can be =uickl+ calibrated for its input b+ adoptin, the follo;in, procedure. @irst confi,ure the instrument for re=uired input "e.,.* PT#//). 2nter into Input K2RO side calibration Mode" see section III)* and press S > to,ether. The input automaticall+ ,ets calibrated to the user confi,ured Ran,e Lo. Aimilarl+ repeat the same procedure for Input AP-N side calibration. @ine calibration ma+ be further re=uired. %&in$ to continuous de'elopments( specifications/operational details in t)is manual are sub#ect to c)an$e &it)out prior notice( and is specific to t)e instrument/s supplied( &it) Soft&are *ode L+40,!.0 L/TROT/5 S<ST/MS P+T: LT4: " /lectronic /state, Pune-(%%&&" 2-ndia3: ,,,:lectrote):com SAL/SGL/TROT/5:OM