Académique Documents
Professionnel Documents
Culture Documents
Scott 120-00341-1
Optical Purge Flow Low
Integration Time 30 sec
Table 2. Instrument Operating Parameters
The analytical viewing zone was set by using a 10 ppm Mn standard. The optimum viewing position is
automatically selected by the Prodigys software.
Method
Sample Preparation
A High Carbon Steel (0.87% C)reference material, SRM 364 (NIST), was used in this study.
Approximately 1 gram of the material was then placed in a Teflon
ICP
standards. In addition, the standards were matrix-matched to the Fe concentration of the reference
material by using Plasma Pure