Académique Documents
Professionnel Documents
Culture Documents
OMNIMUX
MULTI-E1/T1 OVER OPTICAL ETHERNET
Evolutionary Convergence in Transmission of Traditional Voice and Data over Ethernet Network
SPECIFICATION
USER INTERFACE (DOWNLINK)
that are used to carry data, voice and Clock recovery block for Ingress
video. PDH (PSN -> TDM) clock
H x W x D: 44 x 370 x 215 (mm)
generation. Recovered clock jitter is
TRANSPARENT TRANSMISSION compliant to ITU-T G.824/ANSI
T1.105(E1/T1 Jitter Control).
MAIN POWER SUPPLY
OmniMux can transparently transport ● Independent configurable jitter AC: 110 ~ 240V @ 47 ~ 65Hz
proprietary signaling that are required buffer depth to compensate up to DC: -72V ~ -36V (Option)
to support PBX features, including call 250ms of Packet Delay Variation.
conference, call forwarding and SS7. ● Lost packets processing/ ENVIRONMENT CONDITION
Customer can easily apply and enjoy compensation via PW (Pseudo
better integration of TDM and Ethernet Wire) control field Sequence
devices with lower network expense. Ambient temperature: 0℃ ~ 50℃ (0℃
Number. ~ 65℃, optional)
BYPASS INTERNATIONAL TOLL ● Provide Subscriber side Data traffic Storage temperature: 0℃~ 85℃
bandwidth control to guarantee Relative humidity: 5 ~ 95% non
With a pair of OmniMuxs and enough TDM payload bandwidth. condensing
guaranteed internet bandwidth, it is ● PDH LOS detection triggered PW L
sure to save cost dramatically, and to field or payload AIS generation at CONFIGURATION AND MANAGEMENT
ensure the QoS of voice based on Egress direction (TDM -> PSN).
interconnections of TDM ● Configurable IEEE 802.3 DA/SA RS-232 console port (Craft Terminal)
telecommunications equipment. assignment. or SNMP-based management
● Configuration can be made through
RS-232 console port or GUI
(Graphic User Interface).
Page 1 of 2
OMNIMUX APPLICATION
ORDERING INFORMATION
Feature Options:
[ Downlink Interface ] □ 1x E1/T1 □ 2x E1/T1 □ 4x E1/T1
[ Management ] □ Craft terminal □ Craft terminal + SNMP-based GUI management
[ Power ] □ 1x AC □ 1x AC + 1x DC
[ SFP Module ] □ SFP-101 (155M Transceiver for FastEthernet/OC-3/STM-1 FX S1.1, 1310nm@MM)
□ SFP-102 (155M Transceiver for FastEthernet/OC-3/STM-1 FX S1.1, 1310nm@SM)
Tel: +886-2-23886868
Fax: +886-2-23882699
8F., No. 85, Yanping S. Rd., Taipei City 100, Taiwan, R.O.C.
supports@links-system.com
http://www.links-system.com
Page 2 of 2