Académique Documents
Professionnel Documents
Culture Documents
The first time you run tint2, it will create the config file in
$HOME/.config/tint2/tint2rc . (this is true if you have done a clean install. running tint2
in the source directory without doing 'make install' will not create the config file.)
You can specify another file on the command line with -c option. eg. : tint2 -c
$HOME/tint2.conf
When you change the config file, the command line 'killall -SIGUSR1 tint2' will force tint2 to
reload it.
Configuration marked as SVN ONLY are not yet supported and could change in the next stable
release.
tint2 automatically identifies each background with a number (1, 2, ...). then you can
applied background on objects (panel, taskbar, task, clock, systray) with
panel_background_id = 1
taskbar_background_id = 0
task_background_id = 0
task_active_background_id = 2
systray_background_id = 0
clock_background_id = 0
Panel
panel_monitor = monitor (all, 1, 2, ...) Which monitor tint2 draws the
panel on
the first monitor is 1
use panel_monitor = all to get one panel per monitor (unless it's included
into another one)
panel_position
orientation
value for
value for
value for
= vertical_position horizontal_position
vertical_position : bottom, top, center
horizontal_position : left, right, center
orientation : horizontal, vertical
panel_items = LTSBC define the items tint2 will show and the order of those items.
panel_items = STC will show the Systray, the taskbar and the clock (from left to right). SVN
ONLY.
L to show Launcher
T to show Taskbar
S to show Systray (also called notification area)
B to show Battery status
C to show Clock
panel_margin = horizontal_margin vertical_margin
horizontal_margin = 0 to get full monitor width
horizontal_spacing
font_shadow = boolean (0 or 1)
panel_background_id = integer : Which background to use
wm_menu = boolean (0 or 1) : Allow tint2 to forward mouse event to your
Window Manager.
panel_dock = boolean (0 or 1) : Put tint2 into the window managers dock. For
the openbox window manager I can advise to use also a modifier for the moveButton option,
otherwise the mouse click is not forwarded to tint2 (in ~/.config/openbox/rc.xml).
panel_layer = bottom,normal,top : Puts tint2 into the bottom/normal/top layer.
Default is the bottom layer, but for real transparency normal or top layer may be a nice
alternative.
strut_policy = follow_size/minimum/none : STRUTs are used by the
window manager to decide the size of maximized windows. Should the 'maximized
windows' follow tint2 size (follow_size) or use the minimum size (minimum), or use the
screen size (none). minimum option is interresting when used with autohide_height
parameter.
Task
urgent_nb_of_blink = integer : Number of blink on 'get attention' event
task_icon = boolean (0 or 1) : Display task icon or not
task_text = boolean (0 or 1) : Display task text or not
task_centered = boolean (0 or 1) : Task name centered or not
task_maximum_size = width height
width is used with horizontal panel. width = 0 to get
full taskbar width
height is used with vertical panel
task_padding = horizontal_padding vertical_padding
task_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
task_font_color = color opacity (0 to 100)
task_icon_asb = alpha (0 to 100) saturation (-100 to 100)
brightness (-100 to 100) : adjust icon's color and transparency for task.
task_background_id = integer : Which background to use for non selected tasks
For the next 3 options STATUS can be active / iconified / urgent.
task_STATUS_font_color = color opacity (0 to 100)
task_STATUS_icon_asb = alpha (0 to 100) saturation (-100 to
100) brightness (-100 to 100) : adjust icon's color and transparency for active
task
task_STATUS_background_id = integer : Which background to use when task is
selected
task_tooltip = boolean (0 or 1) : enabled(=1) or disabled(=0) tooltip on task
System Tray
systray = boolean (0 or 1) : enabled(=1) or disabled(=0) systray
systray_padding = horizontal_left_right_padding
vertical_padding horizontal_spacing
systray_background_id = integer : Which background to use for non selected
tasks
systray_sort = ascending/descending/left2right/right2left :
Sorting order for icon's systray (if left2right or right2left the order can be different on
restart)
systray_icon_size = max_icon_size : Set the maximum system tray icon size
to number. Set to 0 for automatic icon size
systray_icon_asb = alpha (0 to 100) saturation (-100 to 100)
brightness (-100 to 100) : adjust icon's color and transparency for system tray
icons
Clock
time1_format = %H:%M
time1_format, time2_format and clock_tooltip use 'strftime' syntax. more info on
parameters on http://www.manpagez.com/man/3/strftime/
comment time1_format and time2_format to hide clock
time1_timezone = :US/Hawaii
time1_timezone, time2_timezone and clock_tooltip_timezone can be used to specify
a timezone. If you do not specify a value the system-wide timezone is used. The
timezones can usually be found in /usr/share/zoneinfo. If your timezones are in a
different directory, you need to specify the absolute path, i.e. time1_timezone =
:/different/zoneinfo/dir/US/Hawaii (always prepend with a ':')
time1_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
time2_format = %A %d %B
time2_timezone = :Europe/Berlin
time2_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
clock_font_color = color opacity (0 to 100)
clock_padding = horizontal_padding vertical_padding
clock_background_id = integer : Which background to use
clock_tooltip = %a, %d. %b %Y : clock tooltip text
clock_tooltip_timezone = :UTC
clock_lclick_command = text : Which command to execute on left click
Tooltip
tooltip_padding = horizontal_padding vertical_padding
tooltip_show_timeout = float : delay to show tooltip in second. Use '.' as
decimal separator.
tooltip_hide_timeout = float : delay to close tooltip in second. Use '.' as
decimal separator.
tooltip_background_id = integer : Which background to use (in fake
transparency the alpha channel and rounded are not respected)
tooltip_font_color = color opacity (0 to 100)
tooltip_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
Battery
battery = boolean (0 or 1) : enabled(=1) or disabled(=0) battery applet
battery_hide = never or an integer (0 to 100): At what battery percent
does the battery hide
battery_low_status = integer: At what battery percent does the icon show
battery low command
battery_low_cmd = notify-send "battery low" :What to do when battery is
low
bat1_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
bat2_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
battery_font_color = color opacity (0 to 100)
battery_padding = horizontal_padding vertical_padding
battery_background_id = integer : Which background to use
If a mouse action is set to none and wm_menu = 1 is set, the mouse click is forwarded to the
window manager
Panel autohide
autohide = boolean (0 or 1) : enable(=1) or disable(=0) autohiding
autohide_show_timeout = float : show timeout in seconds. Use '.' as decimal
separator.
autohide_hide_timeout = float : hide timeout in seconds. Use '.' as decimal
separator.
autohide_height = integer : panel height (width for vertical panels) in hidden
mode
An example tint2rc
#--------------------------------------------# TINT2 CONFIG FILE
#--------------------------------------------#--------------------------------------------# BACKGROUND AND BORDER
#--------------------------------------------rounded = 7
border_width = 2
background_color = #000000 60
border_color = #ffffff 18
rounded = 5
border_width = 0
background_color = #ffffff 40
border_color = #ffffff 50
rounded = 5
border_width = 0
background_color = #ffffff 18
border_color = #ffffff 70
#--------------------------------------------# PANEL
#--------------------------------------------panel_monitor = all
panel_position = bottom center
panel_size = 94% 30
panel_margin = 0 0
panel_padding = 7 0
font_shadow = 0
panel_background_id = 1
wm_menu = 0
panel_dock = 0
panel_layer = bottom
#--------------------------------------------# TASKBAR
#--------------------------------------------#taskbar_mode = multi_desktop
taskbar_mode = single_desktop
taskbar_padding = 2 3 2
taskbar_background_id = 0
#taskbar_active_background_id = 0
#--------------------------------------------# TASKS
#--------------------------------------------task_icon = 1
task_text = 1
task_maximum_size = 140 35
task_centered = 1
task_padding = 6 3
task_font = sans 7
task_font_color = #ffffff 70
task_background_id = 3
task_icon_asb = 100 0 0
# replace STATUS by 'urgent', 'active' or 'iconfied'
#task_STATUS_background_id = 2
#task_STATUS_font_color = #ffffff 85
#task_STATUS_icon_asb = 100 0 0
# example:
task_active_background_id = 2
task_active_font_color = #ffffff 85
task_active_icon_asb = 100 0 0
urgent_nb_of_blink = 8
#--------------------------------------------# SYSTRAYBAR
#--------------------------------------------systray = 1
systray_padding = 0 4 5
systray_background_id = 0
systray_sort = left2right
systray_icon_size = 0
systray_icon_asb = 100 0 0
#--------------------------------------------# CLOCK
#--------------------------------------------time1_format = %H:%M
time1_font = sans 8
time2_format = %A %d %B
time2_font = sans 6
clock_font_color = #ffffff 76
clock_padding = 1 0
clock_background_id = 0
#clock_lclick_command = xclock
clock_rclick_command = orage
#clock_tooltip = %A %d %B
#time1_timezone = :US/Hawaii
#time2_timezone = :Europe/Berlin
#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris
#--------------------------------------------# BATTERY
#--------------------------------------------battery = 0
battery_hide = 98
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 76
battery_padding = 1 0
battery_background_id = 0
#--------------------------------------------# TOOLTIP
#--------------------------------------------tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.7
tooltip_hide_timeout = 0.3
tooltip_background_id = 1
tooltip_font_color = #OOOOOO 80
tooltip_font = sans 10
#--------------------------------------------# MOUSE ACTION ON TASK
#--------------------------------------------mouse_middle = none
mouse_right = close
mouse_scroll_up = toggle
mouse_scroll_down = iconify
#--------------------------------------------# AUTOHIDE OPTIONS
#--------------------------------------------autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 2
autohide_height = 4
strut_policy = minimum