0 évaluation0% ont trouvé ce document utile (0 vote)
153 vues4 pages
Fluachem expansion joints are applied in channels and compensate for misalignments, vibrations and for movements in several directions simultaneously. They can be designed for wet or dry conditions Minimum reactive forces Robust designs allowing direct abrasion can be designed for abrasive and other corrosive media 100 % gas tight available with Nekal-tight design Drainage nozzle available Advantages Proven technology Tailor-made to specific requirements Applicable where acid load is high Easy to transport, install and store
Fluachem expansion joints are applied in channels and compensate for misalignments, vibrations and for movements in several directions simultaneously. They can be designed for wet or dry conditions Minimum reactive forces Robust designs allowing direct abrasion can be designed for abrasive and other corrosive media 100 % gas tight available with Nekal-tight design Drainage nozzle available Advantages Proven technology Tailor-made to specific requirements Applicable where acid load is high Easy to transport, install and store
Fluachem expansion joints are applied in channels and compensate for misalignments, vibrations and for movements in several directions simultaneously. They can be designed for wet or dry conditions Minimum reactive forces Robust designs allowing direct abrasion can be designed for abrasive and other corrosive media 100 % gas tight available with Nekal-tight design Drainage nozzle available Advantages Proven technology Tailor-made to specific requirements Applicable where acid load is high Easy to transport, install and store
Fluachem expansion joints Features Single-layered design High flexibility For wet or dry conditions Minimum reactive forces Robust designs allowing direct abrasion Can be designed for abrasive and other corrosive media For gas media installations with very low pressure 100 % gas tight Available with Nekal-tight design Drainage nozzle available Advantages Proven technology Tailor-made to specific requirements Applicable where acid load is high Easy to transport, install and store Require little space for installation One supplier and one shipment of fabric expansion joint an steel frames Risk of incorrect installation is low, when fabric expansion joint and steel frames are pre-assembled Item Description 1 Frames 2 Expansion joint 3 Clamp bar 4 Gasket Fluachem expansion joints (1) 26.09.2013 EagleBurgmann EagleBurgmann KE A/S Park All 34 6600 Vejen Denmark Tel: +45 753 61 811 Fax: +45 753 61 532 info@dk.eagleburgmann.com http://eagleburgmann-ej.com All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. Subject to change. Operating range Temperature: -35 C +300 C (30 F ... +570 F) Pressure: -0.35 0.35 bar (-5 ... 5 PSI) Maximal axial movements: 200 mm (8) Maximal lateral movements: 40 mm (1 1/2) Recommended applications Chemical industry Power plant technology Refining technology Metal production and processing Conventional boilers Flue gas duct systems Condensers Filtration / precipitators Scrubbers / absorbers Chemical reactors Stack, chimney solutions Functional description Fluachem expansion joints are applied in channels and compensate for misalignments, vibrations and for movements in several directions simultaneously. Standards and approvals Documentation: - EN 10204-2.2 certificate - Safety Data Sheets (SDS) for individual materials Installation, Details, Options Fluachem product properties Type Medium: Aggressive Temperature Pressure Flexibility P-flange V-flange No Yes Max. Max. Min. Max. Min. Axial Lateral Butyl 600GS Wet Wet 80 C (176 F) 80 C (176 F) -35 C (-31 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 25 % 13 % EPDM 400G Wet Wet 120 C (248 F) 120 C (248 F) -35 C (-31 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 35 % 18 % EPDM 600GG Wet Wet 120 C (248 F) 120 C (248 F) -35 C (-31 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 25 % 13 % EPDM 600S Wet Wet 120 C (248 F) 120 C (248 F) -35 C (-31 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 25 % 13 % FKM 320G Wet Wet 200 C (392 F) 200 C (392 F) -25 C (-13 F) 0.2 bar (2.9 PSI) -0.2 bar (-2.9 PSI) 35 % 18 % FKM 350S Wet Wet 200 C (392 F) 200 C (392 F) -25 C (-13 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 25 % 18 % FKM 450GS Wet Wet 200 C (392 F) 200 C (392 F) -25 C (-13 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 30 % 15 % FKM 600GG Wet Wet 200 C (392 F) 200 C (392 F) -25 C (-13 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 25 % 13 % FKM 600GS Wet Wet 200 C (392 F) 200 C (392 F) -25 C (-13 F) 0.35 bar (5 PSI) -0.35 bar (-5 PSI) 25 % 13 % C Wet Wet 270 C (518 F) 270 C (518 F) -35 C (-31F) 0.2 bar (2.9 PSI) -0.2 bar (-2.9 PSI) 50 % 20 % O Wet Wet 270 C (518 F) 270 C (518 F) -35 C (-31 F) 0.2 bar (2.9 PSI) -0.2 bar (-2.9 PSI) 50 % 20 % HD Wet Wet 300 C (572 F) 300 C (572 F) -35 C (-31F) 0.2 bar (2.9 PSI) -0.2 bar (-2.9 PSI) 50 % 20 % Fluachem expansion joints (2) 26.09.2013 EagleBurgmann EagleBurgmann KE A/S Park All 34 6600 Vejen Denmark Tel: +45 753 61 811 Fax: +45 753 61 532 info@dk.eagleburgmann.com http://eagleburgmann-ej.com All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. Subject to change. V-Flanges elastomeric expansion joint P-Flanges elastomeric expansion joint V-Flanges fluoroplastic expansion joint Fluachem expansion joints (3) 26.09.2013 EagleBurgmann EagleBurgmann KE A/S Park All 34 6600 Vejen Denmark Tel: +45 753 61 811 Fax: +45 753 61 532 info@dk.eagleburgmann.com http://eagleburgmann-ej.com All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. Subject to change. P-Flanges fluoroplastic expansion joint Product variants Pre-assembled units Pre-assembled expansion joint units consist of Fabric Expansion joint Metal frames/inner sleeves Gaskets (optional) Fasteners Frame Materials: S235 (1.0038), HII (1.0425), Corten A (1.8963), 16Mo3 (1.5415), 13CrMo4-5 (1.7335), 10CrMo9-10 (1.7380), 3Cr12 (1.4003), AISI 304 (1.4301), AISI 316 (1.4401), AISI 316L (1.4404), AISI 321 (1.4541), AISI 409 (1.4512), AISI 410 (1.4006). Pre-assembled expansion joint units can be supplied with surface treatment that is corrosion resistant (standard) and resistant to high temperatures. EagleBurgmann offers any RAL color code for the units. Units can be delivered with seaworthy packing or standard packing for road transportation. Fluachem expansion joints (4) 26.09.2013 EagleBurgmann EagleBurgmann KE A/S Park All 34 6600 Vejen Denmark Tel: +45 753 61 811 Fax: +45 753 61 532 info@dk.eagleburgmann.com http://eagleburgmann-ej.com All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. Subject to change.