0 évaluation0% ont trouvé ce document utile (0 vote)
66 vues6 pages
ENVCWI-PTG1 is a cost-performance effective but most powerful IP Camera product which allows you to implement multiple applications of home surveillance, security or remote caring on LAN or over the Internet. With its high power performance design, it provides you the crystal clear M-JPEG video and image at maximum 30 frames per second in VGA, QVGA and QQVGA resolutions. The built-in microphone of the camera provides on-the-spot audio via the Internet, allowing you to monitor the
ENVCWI-PTG1 is a cost-performance effective but most powerful IP Camera product which allows you to implement multiple applications of home surveillance, security or remote caring on LAN or over the Internet. With its high power performance design, it provides you the crystal clear M-JPEG video and image at maximum 30 frames per second in VGA, QVGA and QQVGA resolutions. The built-in microphone of the camera provides on-the-spot audio via the Internet, allowing you to monitor the
ENVCWI-PTG1 is a cost-performance effective but most powerful IP Camera product which allows you to implement multiple applications of home surveillance, security or remote caring on LAN or over the Internet. With its high power performance design, it provides you the crystal clear M-JPEG video and image at maximum 30 frames per second in VGA, QVGA and QQVGA resolutions. The built-in microphone of the camera provides on-the-spot audio via the Internet, allowing you to monitor the
The ENCORE ENVCWI-PTG1 Wireless Network (IP) Camera with PAN & TILT is a cost-performance effective but most powerful IP Camera product which allows you to implement multiple applications of home surveillance, security or remote caring on LAN or over the Internet.
With user friendly in mind, the IP finder utility software provided could help you find the IP camera in your LAN and configure the IP address easily. With Ultra View software provided, you could configure and manage multiple IP Cameras in one application software. And, you could also manage the IP Camera through web browser software and look at the remote video image remotely over the Internet. With its high power performance design, it provides you the crystal clear M-JPEG video and image at maximum 30 frames per second in VGA, QVGA and QQVGA resolutions. With its Pan-Tilt capability, you could view most view angles of installed circumstance by remote control manually or 8 preset view angles.
The ENVCWI-PTG1 is the right tool you would ever need for applications of home surveillance, security or remote caring on LAN or over the Internet, with the ability to view most view angles of installed circumstance remotely.
Features and Benefits M-JPEG codec Supported: The camera provides you with excellent images by the M-JPEG codec technology, allowing you to adjust image size and quality, and bit rate according to the networking environment. 2-way Audio Capability: The built-in microphone of the camera provides on-the-spot audio via the Internet, allowing you to monitor the on-site voice. In addition, you can connect an external speaker to the camera to speak through the camera. Optimal Viewing: With the pan/tilt functions, you can easily monitor everywhere via the camera by moving the camera lens to the left/right (165/165 degrees) or up/down (90/15 degrees). In addition, you can assign up to eight positions for the camera, enabling you to move the camera lens to the desired position quickly. I/O Connectors Provided: The camera provides the I/O connectors on the rear panel (IN/OUT), which provide the physical interface to send and receive digital signals to a variety of external alarm devices. You can connect a special featured device, and then configure the settings and control the device from the GPIO Trigger window of Web Configuration. Remote Control Supported: By using a standard Web browser or the bundled UltraView software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network. Multiple Platforms Supported: The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 2000, Windows XP, Windows Vista, and so on. Multiple Applications Supported: Through the remote access technology, you can use the cameras to monitor various objects and places for your own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clips, so that you can keep the archives and restore them at any time. Surveillance Supported: The camera supports nightshot mode to deliver clearer images in the low lux environment. Enable motion detection and setup automated email alerts and upload FTP for security.
Specification Image Sensor Sensor 1/4" color CMOS Sensor Resolution 640x480 Minimum Illumination 0.5 LUX Lens Lens Type Board Lens Aperture (F/No.) 1.8 Focus Length 4.0mm View Angle(Diagonal) 64 degree Image Processing Compression M-JPEG Auto Exposure Control Yes Auto White Balance Yes Auto Gain control Yes Image Resolutions and Frame Rates VGA (640 x 480), QVGA (320 x 240), QQVGA (160 x 120): 30 fps max. System Hardware Processor ARM9 based processor RAM 32MB SDRAM ROM 4MB NOR Flash Power DC 12V Power Consumption 9 watts maximum Audio Audio In Internal Omni-directional Microphone, Sensitivity: -48dB +/- 3dB, Freq Response: 50~16000Hz Audio Out External output to active speaker ; Mono Audio Codec PCM Pan-Tilt Pan range +165 ~ -165 degrees Tilt Range +90 ~ -15 degrees Preset Positions 8 positions Communication Ethernet IEEE 802.3u 10/100Mbps Fast Ethernet with Auto-MDI-X Wireless IEEE 802.11g/b compliant wireless LAN interface Protocols supported TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, PPPoE, UPnP Interfaces GPIO 1 in / 1 out LAN One RJ-45 port WLAN One external detachable dipole antenna Reset One Reset button: push and hold for 5 seconds for factory default settings LED indicators Power LED (amber); Link/Act. LED (green) Software Features Image setting Brightness Saturation Contrast Upside down, Mirror Yes Digital Zoom 3x Frame Rate Setting Yes (1~25fps, auto) Compression Ratio Setting 5 levels setting: Lowest, Low, Normal, High, Highest IP Setting Static IP Address DHCP PPPoE Email Support SMTP mail Two destination email accounts Time Management Manual Time Setting Time Server and NTP Support Event Management Events Triggered by Motion Detection/according to Schedule/GPIO Image Upload/Send over email, FTP Rigger GPIO out Schedule Profile Flexible Schedule profile for scheduling Motion Detect / FTP upload / Send email / GPIO Trigger Motion Detection 2 scalable windows System Management Web Based Administration Application Software Device Configuration Backup/Restore to/from Configuration file User Administration Password protected and 3 levels of Authorization: General User can view Video and listen to Audio only. General User has all authority in live view page. Administrator has View video and All configuration setting. Wireless Security WEP 64/128 bit, WPA-PSK, WPA2-PSK System log 100 items (max.) stored in SDRAM Reset Function System reboot button. Reset all settings to factory default values button. LED control Normal / Off Smart Setup Wizard Step by step quick installation setup Browsers Support Internet Explorer 6.0 above Mozilla Firefox 2.0 or above Apple Safari 2 or above API For developing application software OS Supported Windows 2000/XP/Vista Application Software View channels:16 CHs Record Playback Motion detect Backup/Restore to/from Configuration file IP Finder Auto search IP address of camera on your LAN Operating Environment Temperature Operation: 05C ~ 45C Storage: -15C ~ 60C Humidity Operation: 20% ~ 85% non-condensing Storage: 0% ~ 90% non-condensing Safety Regulations FCC/CE Class B
System Requirements Networking LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet. WLAN: IEEE 802.11g/b compliant wireless LAN interface Accessing the Camera using Web Browser: Platform: Microsoft Windows 2000/XP/Vista CPU: Intel Pentium III 350MHz or above RAM: 128MB Resolution: 800x600 or above User Interface: Microsoft Internet Explorer 6.0 or above Apple Safari 2 or above Mozilla Firefox 2.00 or above Accessing the Camera using UltraView Platform: Microsoft Windows 2000/XP/Vista. Hardware Requirement: 1 camera connected: Intel Pentium III 800MHz; 512MB RAM 2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM 5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM 9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM Resolution: 1024x768 or above NOTE: If you connect multiple cameras to monitor various places simultaneously, you are recommended to use a computer with higher performance.
Package Contents One Wireless Network (IP) Camera with PAN & TILT. One AC Power Adapter. One External Antenna One Camera Stand. One Ethernet Cable (RJ-45 type). One Installation CD-ROM. One Quick Installation Guide.
The specifications and picture are subject to change without prior notice! Please refer to the directions in product package