Académique Documents
Professionnel Documents
Culture Documents
Pages 8-10
Kre8
Control
Pages 2-3
Wireless
Control
Pages 18-20
EDUCATIONAL
Tainer ........................11
Industrial Automation..................11
Infrared Control ..........................18
Infrared Sensor Packs ....................5
Kel-Botics
......................6
Robotics Kits ..............................12
ROVs ..........................................21
Smart Materials ..........................13
Space Wings................................13
Submersibles ..............................21
SUMO Car Wrestle
r
................8-10
Tamiya Robotics Kits ....................12
Tug-of-War/Tractor Pull Activity ......5
Turntable ......................................4
USB Relay Board Control Lab ........4
Wheels........................................30
Complete Science, Technology & Electronics Catalog Online at www.kelvin.com
CANADIAN SCHOOLS
Open P.O. accepted.
Shipping from Ontario
(U.S. orders ship from New York).
Catalog prices are in US $.
For More Information,
Visit www.kelvin.com
Toll-free USA & Canada,
1-800-KELVIN-9 (EST)
R O B O T I C S
Copyright Kelvin L.P.
2 www.kelvin.com KELVIN
Rods)
Two Low
Power
Outputs
(i.e. LEDs)
Inputs
(i.e. Switch)
Medium
Power
Output
(i.e. Small
Motor)
The Kre8
Brainy-
USB Board is a Low
Cost Microprocessor
project to Control
Motors with Live
Debug and Works
with Flowol
3
Software!
CONSTRUCTION SYSTEM
Kre8
Brainy-USB
This low-cost 8pin multi-purpose microcontroller in kit or
(assembled and tested), when assembled by soldering, makes a
versatile control board that can be programmed via a computer
using the latest Flowol
, using the
corner holes to fix in place. Users connect to the input or output
connections by soldering wires. *Alternatively screw connectors
can be soldered in place.
Live debug in real time (sometimes called in circuit emulation
or ICE for short)! The Flowol 3 software makes easy testing
and set up with its powerful facility to program as normal AND
also the ability to directly control the Brainy-USB in real time
while testing. Responding to PCB input feedback via the USB
cable before the program is finally downloaded for autonomous
use and the USB cable is removed. The Brainy-USB then works
independent of the computer and can be taken home as a
working project.
Assemble the microcontroller (or get it already assembled
and tested), program it and then use it to control your model.
Each kit includes: Brainy-USB PCB, chip holder, 3.5mm socket for
USB cable, resistors, capacitors, diodes, 6V battery holder and
additional information.
Teachers can also supply screws or removable connectors (so
the inputs and outputs can be changed without soldering),
LEDs, 3- 6V electric motors, switches and soldering equipment.
Soldering required. You will also need to purchase Optional Fairground
Kit (below), Flowol 3
3 Software
Students of all ages (ages 8 and older) can explore computer
control and robotics using the visual programming language of
flowcharts; no coding skills are required. Suitable for Grades 3
through college. Find more info online at www.kelvin.com.
Kre8 Fairground Ride
(optional) shown with the
Kre8 Brainy-USB Attached
Build the Kre8
Fairground
Ride & Use the Brainy-USB
to Control It!
R O B O T I C S
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 3
Copyright Kelvin L.P. Flowol is registered trademark of Keep I.T. Easy LLC FlowIC is registered trademark of Intelligent FirmwerX. Kre8 is registered trademark of KELVIN (USA)
Kre8
Red Robot
An easy to make, and easy to customize, robot that can be used
with the Brainy-Motor. The average middle school student, with
teacher support, will be able to make it - some soldering is needed
to connect the sensors, motors etc. It has large wheels driven by
two geared-down motors allowing it to work on carpet. Also
comes with micro-switches, 2 LEDs and a buzzer. Optional Kre8
software sold
separately (see below).
283707 Red Robot Kit Only..................$34.95 or $32.95 ea./5+ or $29.95 ea./10+
Kre8
Brainy-Motor Board
Assemble and solder your own Brainy-Motor Board (or get pre-
assembled, soldered and tested) and program it to control a
motorized model or robot, Designed for students by teachers
and educators This educational 14pin micro-controller kit is an
extremely useful low cost motor controller, which when assembled
by soldering, can be used for controlling three motors and is
ideally suited for robot work. It is programmed via a PC or Mac
computer using the latest Flowol
3 software makes
easy testing and set up with its powerful facility to program as
normal AND also the ability to directly control the Brainy-Motor
Board in real time while testing. Responding to PCB input feedback
via the USB cable before the program is finally downloaded for
autonomous use and the USB cable is removed. The Brainy-Motor
then works independent of the computer and can be taken home
as a working project.
Each kit includes the core parts to get going such as: PCB,
Resistors, Transistor, Diode, Capacitors, IC Driver Chip, LED, IC
Sockets, 6V Battery Holder, 9V Battery Snap, Connector, Cover,
Bolts, Spacers and directions. The kit version requires advanced
assembly skills and soldering.
Requires 4 AA alkaline batteries. Teachers can also supply
screws or removable connectors (so the inputs and outputs
can be changed without soldering), LEDs, 3- 6V electric motors,
switches and soldering equipment.
You will need to purchase Flowol
The Kre8
Brainy-Motor Board
is a Low Cost
Microprocessor
project to Control
Motors with Live
Debug and Works
with Flowol
3
Software!
FOUR INPUTS
(not Included)
Add switching devices such as:
1. push switch
2. slide switch
3. wires touching
4. tilt switch, etc
FOUR
OUTPUTS (not Included)
Motors can be small DC
motors or solar motors:
Low Power
Motor On/Off
Motor Reversing (Robot)
Flowol
3 Software
Students of all ages (ages 8 and older) can explore computer
control and robotics using the visual programming language of
flowcharts; no coding skills are required. Suitable for Grades 3
through college.
Find more info online at www.kelvin.com.
ROBOTIC ARM R O B O T I C S
Copyright Kelvin L.P.
4 www.kelvin.com KELVIN
s
Robotic Control System has superior
hardware and software for better robotic
arm response. KELVIN
Robotic Cell
Conveyor Belt
Increase height (low to high) or remove. Add
sensors to count, sort, read IDs, time, etc. 3 ft.
L x 4 W. Includes two stands for holders. Runs
6-12V DC. Requires variable power supply listed
below. Robotic Arm not included (see above).
841893 Assembled Conveyor Belt ................................$695
841051 Kel-K.P.S. #100 Variable Power Supply ............$125
Robotic
Arm,
Listed
Above.
Combine the
Conveyor Belt
& Turntable to
Create Your
Own Robotic
Manufacturing
Unit!
SAVE!
R O B O T I C S TUG OF WAR
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 5
Tug-of-War/Tractor Pull Competition Kit with Track
Classmates can compete directly against each other with the Kelvin Tug-of War Activity
or they can compete indirectly with the Kelvin Tractor Pull. By altering gear ratios, vehicle
weight, traction systems and wheel sizes students build vehicles with the greatest pulling power. They
can try to move the greatest weight or pull another vehicle across the threshold. A fun learning experience.
Requires variable power supply for operation (see below). Can be used with a single KELVIN
Competition Arena
This complete system for conducting all-out robotic arm
combat is an economical, one time expense for your school
because you can use it with all robotic classes. The challenge
is to design a robotic arm with an electromagnet head that
picks up balls with metal screws through them. The first team
to move six balls from the central container and put them in
their teams ball return container is the winner. Robotic arm
construction and team work throughout construction and
competition are keys to winning.
The system includes: an assembled metal arena board
(16"x47") with space to mount the robotic arms as well as the ball container, ball return tubes,
balls with screws attached, [6] assembled hand controllers on metal bases (three per team), [2]
switches for turning on/off the electromagnets (one per team), instructions, drawings PLUS [4]
Robotic Battle Ball
Robotic Arm Kits (enough essential parts for 4 teamssee #841333 for
content). Requires two 6V lantern batteries (#220045 or #220012).
841356 Arena Board, Controllers and Parts Kits ............................................................................................................$895
121208 KELVIN
Video ..............................................................................................................$29.95
Build Your Own
Battle Ball
Robotic Arm
Since we dont know the material or design students will choose for
their robotic arm, weve put together this kit with the parts they
must use, such as: [3] syringes, [3] syringe holders, magnet wire, bolt
and washers for magnet head, wire, and vinyl tubing for water. In
addition, we have added [3] 1x2x12 pieces of pine and [2] small
aluminum plates.
This is an open-ended design competition so we don't provide
plans; we recommend purchasing the Hydraulic Robotic Arm Demo
Unit (#841329) in order to get ideas. Requires 3 Competition Arena
Controllers (#841376) or the Electronic Power Pack Controllers
(#841330). One kit required for a team of 3-4 students.
841333 ................................................$24.95 or $22.95 ea./10+ or $19.95 ea./20+
Shown above is Marty Nelson, the competitions designer, and his students from Quince Orchard High School in Montgomery
County, Maryland. He and his students have successfully conducted this activity every year since 1997. the kids love it!!
DESIGN & LEARN
MEASURE
FABRICATE
TEAMWORK
ROBOTIC
BATTLE BALL
Robotic Arm Demo Unit
Each student controls an axis
and the electromagnet head.
Includes: assembled robotic arm,
[3] hand controllers, and balls
with screws. Requires 6V lantern
battery (#000000).
841329 Demo Unit Kit ............$395
Assembled Robotic Arm
Requires #841356
or #841330.
841384 ..........................$195
The KELVIN
Robotic Battle Ball Competition
is comprised of affordable,
multi-discipline activities with invention, design & engineering in mind.
MANUAL CONTROL
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 7
R O B O T I C S ROBOTIC BATTLE BALL
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 7
RoboTech
COMPUTER CONTROL
This robotic interface takes the place of
manual hand control switches. We also
include RoboTech
Electronic
Control Includes:
Power Pack Controller
(Assembled)
Water Reservoir
[4] Hand Control
Switch Units with
Forward and Reverse
Buttons
[4] Water Pumps
Vinyl Tubing
Instructions
Hydraulics
Control
Unit
RoboTech Electronic Control System with Assembled Robotic Arm
Electronic Control System (#841330) and an Assembled Robot Arm (#841384).
841694 RoboTech
WRESTLER R O B O T I C S
Copyright Kelvin L.P.
8 www.kelvin.com KELVIN
Arena
8ft. Diameter,
#282361, $395
The KELVIN
SUMO Wrestler
Kits
Kits include motors, plastic gearboxes, gear sets, bases, wheels,
traction bands, tether control, axles, washers, nuts and written
materials. Add-on bases include spacers and screws. Requires a
controller. MS to HS.
842069 7-1/2 Dia. Circular Base Kit ............................$49.95 or $44.50 ea./10+
842070 Add-On 7-1/2 Dia. Circular Base for 2nd Level ....$16.95 or $14.95 ea./10+
842071 7-1/2 L Rectangular Base Kit............................$49.95 or $44.50 ea./10+
842072 Add-On 7-1/2 L Rect. Base for 2nd Level ............$16.95 or $14.95 ea./10+
Advanced SUMO Wrestler
Kits
Kits include motors, larger metal gearboxes, gear sets, pre-
punched U-shape gear bracket, base, wheels, traction bands,
tether control, axles, washers, nuts and written materials. Add-
on bases include spacers and screws. Requires a controller.
Recommended for HS to College.
842073 10-1/2 Dia. Circular Base Kit ............................$59.95 or $57.95 ea./10+
842074 Add-On 10-1/2 Dia. Circular Base for 2nd Level ....$19.95 or $18.95 ea./10+
842075 10-1/2 L Rectangular Base Kit ..........................$59.95 or $57.95 ea./10+
842076 Add-On 10-1/2 L Rect. Base for 2nd Level ..........$19.95 or $18.95 ea./10+
SUMO Wrestler
Wireless Controller
Add your above kit (needed for each
competing SUMO Wrestler
if going
wireless). Can be added on the second
level. Includes servo motors, rechargeable
battery, battery charger, Receiver,
and KELVIN
PC board.
842077 Kit to Control 2 Motors ........................$195
842078 Kit to Control 4 Motors ..........................$295
Metal SUMO Wrestler
Kit
Students work with sheet metal to
design and fabricate their SUMO
Wrestler
Wired
SUMO Wrestler
Controller
The KELVIN
SUMO Controller
is a wired controller that can be
used to add remote control.
Ideal for testing vehicles with
no waitinghave a few in
the classroom or students
can even take it home! For
battery operation, [4] C
batteries are required (Alkaline,
#220015 or Ni-Cad, #220027). For a classroom
competition, we recommend the KELVIN
CAR WIRED
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 9
SUMO
Car
Wrestler controller.
841265 ................................$29.95
Battling SUMO
Car
Wired Arena!
SUMO
Car Arena
Keeps wires out of the way and provides a 4 ft. diameter arena
for competition. Use with the SUMO
Car with
wire. PC board with 2 DPDT
switches to control 2 motors.
Position switch to off, forward,
reverse, left and right.
280752 ........$6.95 or $5.95 ea./10+
Pushbutton Terminal
This pushbutton terminal has
spring loaded posts for easy
connection with four
positions; two red and two
black.
390737 ..............................$1.50
WIRED
Robotic Design and
Competition
SUMO
CAR
SUMO
CAR
Upgrade to
an Apache!
SUMO W2
Wireless Robotic Controller Set
The KELVIN
SUMO W2
SUMO
Car
Wrestlers. Includes [2] gear boxes with
adjustable gear ratios, wood base and [3]
wheels. Does not include electronic materials.
Includes [2] 1.54.5 VDC motors.
841293 Kit ..................................................$18.95
NOTE: Does not include servos, receiver or batteries use those supplied with the SUMO W2,
#841289, or the SUMO W4, #841292. Servos are also sold separately at right.
Students will design a car that is controlled by either two servo motors
and a controller (SUMO
W2
W4
SUMO
Wireless Robotic Car
.
220123 9.6V Battery Pack ..........$19.95
220122 9.6V Battery Charger ......$19.95
Precision Servo Motor
4.8-6V DC. For robotics and remote-
controlled prototypes. Lightweight plane
motor outputs 42-oz. of torque/in.
850719 ......................$19.95 or $19.45 ea./4+
Ping Pong Balls
870036 6/pkg. ........$2.10
WIRELESS
Robotic Car
Competition
SUMO
CAR
SUMO
CAR
Advanced Gear Set
Evenly spaced holes near
the edge, which can be
used with a slotted
opticoupler to
measure velocity,
acceleration or
distance of the gear
or vehicle. Holes can
also be used to attach
the gear to a wheel,
pulley or other objects.
Gear A has a 9/16 diameter with
13 teeth, Gear B has a 3/4 dia. with
18 teeth, Gear C has a 1-9/16 dia. with 38 teeth and Gear D
has a 2-11/32 dia. with 58 teeth. Set includes four center
hole inserts to 1/8 and one insert to 2mm.
391128 ..............................................................$2.45 or $1.95 ea./10+
Slotted Opticoupler
For the Advanced Gear Set. Use with your
circuit to measure the gear rotation speed.
270115 5V DC......................................................$3.95
c
A
D
An application of the
Advanced Gear Set
Use These Gears to Count
Movement with Sensors
Find Additional
Gears at
www.kelvin.com
B
10 www.kelvin.com KELVIN
CAR WIRELESS R O B O T I C S
Advanced Automation
& Programmable Control
A low cost and versatile Programmable Logic Controller
which is programmed with the industry-standard Ladder
Logic and BASIC language. With its 6 inputs and 4 outputs,
students can control verity of devices and before
downloading the Ladder Logic program, the simulator can
simulate the program. Ideal for Small projects, Robotics,
Timers, Counters and Alarm systems.
841734 PLC Trainer ........................................................................$745
841735 PLC Trainer with Computer and 19 LCD Display ....................$2,245
Industrial Automation
PLC Trainer
This Lab Includes:
[6] Inputs w/LED Indicators
(12-30V DC, NPN type)
[4] Outputs with LED
Indicators (1A@12-30V DC)
Input/Output Terminal Blocks
Input Toggle Switches
[4] Timers (0.1s to 25.4s)
[4] Counters (1 to 254)
Sequencer with
32 Steps (0-31)
90 Program Steps (1 contact = 1 step)
Advanced Industrial Automation PLC Trainer
Features 24 inputs and 16 outputs. With its built-in RS232
communication port, Clock/Calendar and the on-board
power supply, it becomes a versatile learning tool. The PLC
Trainer II meets and exceeds VICA requirements and is
programmable with the industry-standard Ladder Logic.
This Lab Includes:
[24] Inputs w/ LED
Indicators (12-30V DC, NPN type)
[16] Outputs w/ LED
Indicators (1A@12-30V DC)
Input/Output Terminal
Blocks
Input Toggle Switches
Start/Stop Switch
2,720 Program Steps
(1 contact = 1 step)
Emergency Stop Switch
Reset Button
Master Electro-
mechanical Relay
to Kill Power
841736 Advanced PLC Trainer ........................................................$1,945
841737 Advanced PLC Trainer with Computer and 19" LCD Display ........$3,445
BOTH IDEAL FOR HIGH SCHOOL/VOCATIONAL/COLLEGES
IfThen
Trainer
Sense & Control Programmable Logic Controller. Learn more
about the elements of condition programming. Also, use it to
control a model of your design such as a greenhouse, light show,
house alarm, doll house automation, etc. The IfThen
programming is written in simple logic for quick learning.
The assembled controller includes a light sensor, switch sensor,
buzzer, light bulb, motor and wall adapter. RS232 cable. Gr. 6+.
840990 KELVIN
IfThen
Software - Optional
This software to creates a program on
the computer and downloads it with
RS232 cable to the IfThen
Trainer
without tying it up. Put programs on disk
for use later. Has an IBM Site License for
the class.
120873 ..................................................$99.95
Programmable Control
Without a Computer
Features include:
On-Board Sense and
Control Programming
2-Line Alphanumeric,
Backlit Display
Input > Process > Output
Built-In Microprocessor
Built-In Keyboard
[4] Input Sensors: switch,
photocell, etc.
[8] Outputs (buzzers, lights,
etc.) or 4 Motor Outputs
Greenhouse
kit, batteries,
battery holder & linear
actuator motor shown
sold separately below.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 11
Copyright Kelvin L.P.
R O B O T I C S IF...THEN TRAINER
KITS R O B O T I C S
Copyright Kelvin L.P.
12 www.kelvin.com KELVIN
Kit (for advanced students) or buy already assembled. Kit versions require
soldering and assembly and are for advanced students. Optional Robotics Vehicle Base
(not included) to build and experiment with sold separately (see right). Gr. 9 and up.
Transmitter
The transmitter uses infrared light to transmit commands to the receiver. Visual and
audible methods are used to demonstrate methods of infrared technology
communication.
Each transmitter/controller can control 3 motors and a solenoid. The first and second
motor are assumed to be connected to the wheels and the controller can control
forward, backward, left and right movements. For the third motor the controller can
control the left and right direction of movement. The controller can turn the solenoid
on and off. Simple switch interface, easy to hold and operate.
Receiver
The microcontroller-based receiver module measures just a bit over 3x2 in size.
Screw terminal for the motors and the solenoid are used for easy access and
modifications. Four bi-color LEDs visually indicate the state of each motor driver. A
bank of small switches selects one of the sixteen supported devices.
842119 IR Control Mini Lab with 1Receiver & 1 Transmitter ..........................................................................$295
842134 IR Control Receiver & Transmitter Kits - Req. Soldering ..................................................................$199.95
WIRELESS
TECHNOLOGY FOR
CONTROL AND
ROBOTICS
Build a Wireless
Controller for
Control of 4
Motor Outputs
NEW!
Robotics Vehicle Base
Optional vehicle base includes [2]
Servos, battery holder, wheels, and
body. Design. Requires assembly.
842132 ..............................................$125
INFRARED (IR) CONTROL R O B O T I C S
Copyright Kelvin L.P.
18 www.kelvin.com KELVIN
Cars,
DC motor vehicles or other robotics vehicles. Available as a Build
Your Own
Trainer
This trainer is an excellent way to teach
hydraulics to students in high school and
up. The compact, heavy-duty trainer
includes resources that emphasize problem-
solving and a hands-on approach to
learning in technology education.
Hydraulic products like automobile lifts,
elevators, and robots are often operated
using oil as the working fluid. KELVINs
HydraBasics Trainer uses distilled water
instead of oil which, can be messy when
used in a classroom lab.
The workbook contains a series of
problems that investigate the control of
cylinders and the integration of hydraulics
with mechanical and electrical systems.
Hands-on learning activities include:
Hydraulic Basics, Pascals Law, Control Valves
and Cylinders, the Compressibility of Fluids,
Creative Circuitry Design and Industrial
Applications.
The assembled trainer includes
industrial-grade components, student
workbook and teacher guide.
840723 Assembled Trainer..................
$
1,595
Hydraulic Parts Only
Students are required to plan and design
their own system.
840735 Parts Only............................................$945
500027 Portable Air Compressor w/Built-In Air Tank ............$145
500026 Portable Air Tank, 7-Gallon Volume ....................$49.95
Pneumatic Parts Only
Students are required to plan and design their own system.
840733 Parts Only ............................................................................$795
R O B O T I C S WATER
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 21
Advanced Submarine Design Challenge
The sight of a submarine disappearing into the vast ocean deep captures
the imagination of both the young and old. How does the sub descend
and then climb back to the waters surface? What propels the submarine
deep underwater?
The KELVIN
Car or Invention
Push Pull Wires
Flexible and solid rod for use with controls,
horns, bell crank and mini push pull rod
(20 long), nylon connectors (mini kwik
link), screws, couplers and nylon sleeves.
281874 2/pkg. ......................$3.45 or $3.25 ea./4+
Extra Flexible Control Cable
Use as cable for: rudder, elevator, flaps,
tail wheels, throttle, nose gear retract,
powerboat rudder, outboard steering, or
a sail. 2-56 size, 32 multi-strand. 36 long.
281879 ..........................$11.95 or $10.95 ea./4+
Pull-Pull
Cable System
System Includes: 15 feet of
metal coated nylon cable ,
[4] kwik link connectors and
keepers, [4] hex nuts, [4]
couplers, [4] crimps and 4
heat shrink.
281875 ....$9.95 or $9.45 ea./3+
Nylon Hinges
Hinge pin locked in place.
7/16 W x 1-1/16 L. 6/pkg.
283102 ......$2.45 or $2.25 ea./3+
Bell Crank Kit
Includes [2] nylon bell
cranks, [2 ]brass bushings,
[2] nuts, bolts and washers.
2/pkg.
281868$1.75 or $1.65 ea./3+
T-Style Control Horns
Ideal for use as ailerons,
elevators, and rudder.
Includes screws. Nylon,1
long. 2/pkg.
281866$1.45 or $1.25 ea./3+
E-Z Connectors
283106 ......$2.15 or $1.95 ea./3+
Steering Arm
Assembly
1-1/4 Nylon assembly for
5/32 nose gear wire.
283105 ......$2.95 or $2.75 ea./3+
Flexible Cable
Heavy duty cable and sleeve for model
planes. Includes metal Kwik connect, plastic
connect and coupling screw. 20" long.
281876 ..............................$2.95 or $2.75 ea./4+
Flexible Control Cable
Extra long 48 Nylon cable (Type 2-56 size)
includes inside tubes, outside tube,
connectors and screws (2 sets).
281878 ..............................$7.95 or $7.65 ea./4+
Cut To Size Project Parts
Items that are useful for your projects
when you need matching screw shaft and
nut to hold it together. Screw thread with
extra long shaft, 2:56x12 long, can be cut
to size. Brass ty\ube is 12 long, cut to size.
390672 Screw Thread ............$1.95 or $1.85 ea./10+
390763 Brass Tube ..............$1.35 or $1.20 ea./10+
390049 Nuts, 2:56 x 3/16 100/pkg. ..............$2.25
Turntable Base
Make a turntable, storage
caddy, and much more!
390715 3 dia. base ............$2.95
Threaded Rod
3/8 dia. x 2 ft. long
390864 ...$4.45 or $3.95 ea./10+
Threaded Base Plate
Fits 3/8 dia. rod (above).
390958 ...$2.25 or $1.95 ea./10+
Servo
Arms Attachments
Regular Size
281870$10.95 or $9.95 ea./3+
Longer Size
281880...$11.95 or $10.95 ea./3+
Landing Gear Clamps
Use 1/8 clamps to keep
cables attached to project
body. 4/pkg.
281867$2.15 or $1.95 ea./3+
Plastic Rivets
4mm diameter rivet and
locking ring for easy joining
of roll tubes. Approx. 75
rivets and rings.
391142$3.25 or $2.95 ea./3+
L-Control
Bracket
1 with 1/8 hole. For
attaching cables and
control. 6/pkg.
281869$3.75 or $3.60 ea./3+
R O B O T I C S PULLEYS
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 23
Hanging
Pulleys
Use metal
pulleys for
mounting or
hanging
models and experiments. Ideal for
SUMO Car Wrestler
activities.
390706 1/2 dia. ............ $2.95 or $2.75 ea./3+
390455 1 dia................. $3.45 or $3.25 ea./3+
390743 Small Single Pulley ........................$4.95
390744 Small Dual Pulley ..........................$5.95
A
C
A
A
Pulley Packs
Each pulley is sized to fit a
3/16 diameter shaft.
390580 20mm, 20/pkg. ..........$9.95
390581 30mm, 20/pkg. ..........$9.95
390582 50mm, 20/pkg. ........$12.95
Pulley Activity Set
Experiment with
dragging loads up
inclines. Includes [2]
pulleys, double tandem
pulley, triple tandem
pulley and activity guide.
280341 ..............................................................$13.95
Pulley Wheel
Use to demonstrate
mechanical advantage
and conservation of
energy. Four coaxial
pulleys (42, 58, 75 &
112mm dia.) and a wheel fitted with a ball
bearing turn on a single steel rod.
710185 ..............................$14.95 or $13.95 ea./3+
Pulley Set
Set of seven
assorted pulleys:
10mm, [2]
12mm, 15mm,
20 mm, 25mm
and 30mm
diameter. 10mm fits a toy motor shaft.
390396 ..............................$4.95 or $4.45 ea./3+
Pulley Station
Structure with multiple pulleys for
experimenting in your class.
841266 ....................................................$99.95
B
C
A
Clothesline Pulleys
Use these pulleys to simulate conveyor belts
with cord and clothespins.
390742 Small Clothesline Pulley ......................$4.95
390374 5 Pulley ..................$5.95 or $5.65 ea./3+
280173 Spring Clothespins, 50/pkg. ..................$4.95
330346 Pulley Cord, #18 dia., 100 ft. ................$4.95
330333 General Cord, 3/16" dia., 100 ft. ..........$11.95
Drive Belts for Pulleys 5/pkg.
For precise motion transfer.
841937 60mm...$3.95 or $3.75 ea./3+
841429 90mm...$3.95 or $3.75 ea./3+
Set Screw Pulleys 5/pkg.
Pulleys with set screws, brass hubs and
4mm hole. Works with drive belts and hole
reducers below.
391088 10 mm dia. ..........$4.45 or $4.25 ea./3+
391089 20 mm dia. ..........$8.95 or $8.45 ea./3+
391090 40 mm dia. ..........$9.95 or $9.45 ea./3+
841537 60 mm dia. ......$11.95 or $10.95 ea./3+
Hole Reducers 10/pkg.
391091 4mm to 2mm ............$4.95 or $4.45 ea./3+
391294 4mm to 3mm ............$4.95 or $4.45 ea./3+
C
D
B
A
Creative
Crane Pulley
This pulley will fit a
2mm motor shaft or a
1/8" dia. axle. The inside
width is 3/8". The
overall width is 0.94".
The inner diameter is
0.28" and the outer
diameter is 1-1/2". Has
holes in side wall to
thread string through.
990212 10/pkg. ........................$9.95 or $8.95 ea./3+
High Quality Pulleys
High quality pulleys for all your
experiments. Style may vary. 50mm.
710062 Single ..............$1.65 or $1.45 ea./10+
710063 Double ..............$2.45 or $2.25 ea./10+
710064 Triple ................$2.95 or $2.75 ea./10+
710068 Quadruple..........$3.45 or $3.25 ea./10+
710065 Double Tandem ..$2.75 or $2.45 ea./10+
710075 Triple Tandem .... $3.45 or $3.25 ea./10+ F
E
D
C
B
A
Ball Bearing Pulley
1-1/2" dia. sized to fit a
1/4" diameter shaft.
390457 2/pkg. ................$7.95
A
B
C
D
Economy Pulley Set
An economical set of
four pulleys. 10mm.
dia, pulley fits 2mm
shaft. 20mm dia.
pulley fits 1/8 shaft.
30mm dia. pulley fits
1/8 shaft. 40mm dia.
pulley fits 1/8 shaft.
841538$1.95 or $1.75 ea./10+ or $1.45 ea./100+
841539 Bulk Pack of 20 Sets (4/Set) ................$19.95
Pulley on a Rod
Use it for incline plane or other
apparatus. 8mm shaft diameter
with plastic case.
710071 ....................................$5.95 or $4.95 ea./3+
A C D E B
A C D E F B
Open Side Jumbo Pulleys
Open side allows you to to run cord
more easily. 70mm.
710080 Double ..............$4.25 or $3.95 ea./10+
710081 Triple ................$4.95 or $4.45 ea./10+
710082 Quadruple ..........$5.95 or $5.75 ea./10+
710083 Double ..............$4.25 or $3.95 ea./10+
710084 Triple ................$4.95 or $4.45 ea./10+ E
D
C
B
A
Gear/Pulley
Combo Unit
Fits 2mm (toy
motor) shaft. 20/pkg.
390585, $3.95 or $3.45 ea./3+
GEARBOXES R O B O T I C S
Copyright Kelvin L.P.
24 www.kelvin.com KELVIN
3-6V
DC motor part (#850647). NOTE: Wheels,
Gears, Battery and Motor or Complete Kit
are available separately. Mounting
hardware for motor, bracket and gears is
listed below. 5/pkg.
990204 ....$9.95 or $8.95 ea./10+ or $7.95 ea./25+
To Attach Motors and Gears To The
Bracket, Use The Following:
390026 #6x3/8 Screw for Gears, 100/pkg. ........$2.40
390931 #4x1/4 Screw for Motors, 100/pkg. ......$2.45
#4:40x1/2 Screw for Motors
390007 100/pkg. ..................$4.95 or $4.45 ea./3+
#4 Nylon Lock Nut for Motors
390944 100/pkg. ..................$4.95 or $4.75 ea./3+
Small Motor Pinion
Gears
10-Tooth gears. 10/pkg.
Fits a 2mm diameter shaft.
390623 ..............$1.95
Small Motor Pinion Gears
Adapters/Reducers
Place in gear to fit
a toy motor shaft.
1/8 (3mm) to 2mm Shaft
390632 10/pkg. ............................................$1.45
3/16 (4mm) to 2mm Shaft
390629 10/pkg. ............................................$1.45
[4] 10-Tooth
Gears
[4] 20-Tooth
Gears
[4] 30-Tooth
Gears
[4] 40-Tooth
Gears
[4] 50-Tooth
Gears
[2] 1/4 Dia. Rack
& Pinion Gears; 8
turns/in.
[2] Racks: 8-teeth
per inch, 2 long
[2] 1/2" Dia. Rack
& Pinion Gears;
8 turns/in.
[2] Axles: 2
Long x 1/8 dia.
[2] Axles: 2-3/4
Long x 1/8 dia.
[2] Axles: 3-3/4
Long x 1/8 dia.
[2] Axles: 4-3/4
Long x 1/8 dia.
Deluxe Gear Set
For power transmission. Small gear and
worm gears fit a toy motor. Includes:
750112 Set ......................$36.95 or $34.95 ea./3+
Gear and Pulley Combo
10-tooth gear with built-in pulley. Will fit
a 2mm shaft.
390585 20/pkg. ....................$3.95 or $3.45 ea./3+
Double Molded Gears
EA.
Stock
#
Fig.
Fits Motor
Size (mm)
Fits Syringe
Size / Type
Size
(I.D.)
Qty. Price
10+
Price
282424 A 6cc Straight 1/2 1 75 49
390968 A 23.5 x 27 20cc Straight, 30cc Luer, 35cc Straight 7/8 1 75 49
390963 B 10cc Straight 11/16 1 75 49
390967 B 23.5 x 27 , 24 x 32 30cc Luer 15/16 1 75 49
390962 B 60cc Straight, 60cc Luer 1 1 $1.25 99
390726 C 23.5 x 27 , 24 x 32 35cc Straight 1-1/16 10 $1.25 99
390727 1-13/16 2 79 69
390588 20 x 25 10cc Straight, 6cc Luer, 35cc Straight 11/16 10 $5.95 $5.65
390572 D 23.5 x 27 20cc Straight 13/16 10 $5.95 $5.65
Stock
#
Fig.
Voltage
Range
Nominal
Voltage
Current
(Amps)
RPM
(Max.)
Torque
(g/cm)
Terminal Type
Shaft Dia.
(mm)
Shaft
Length
(mm)
Size
(DxL mm)
Price
10+
Price
100+
Price
851105 A 0.7-5.0 2 0.018 2,200 2.8 125mm Wires 2 6 25 x 13.5 $2.95 $2.75 $2.45
851255 B 1.0-6.0 6 0.041 10,500 4.3 Solder 1.5 4 15.5 x 24.1 $2.45 $2.25 $1.95
851256 C 1.5-3.0 2.4 0.096 15,800 2.7 Solder 1 3.6 12 x 15 $2.95 $2.75 $2.45
851257 D 0.9-1.6 1.5 0.1 6,500 Solder Vibrator 10 x 12.4 $3.45 $3.25 $2.95
851258 E 3.6-6.0 4.5 0.029 28,580 9.4 30mm Wires 1 2.8 10 x 12.4 $3.45 $3.25 $2.95
851259 F 1.0-2.4 1.5 0.056 21,300 6.4 30mm Wires 1 4.2 7 x 16.6 $2.95 $2.75 $2.45
851165 G 1.5-6.0 6 12,000 Solder 1.5 3.5 18 x 10 x 19 $1.15 89
79
850646 H 1.2-3.0 1.5 0.34 10,200 6.81 Solder 2 8.1 20 x 25 85 79
59
851254 H 1.0-1.5 1.5 0.7 14,400 12.4 Solder 2 8.1 20 x 25 $2.45 $2.25 $1.95
851230 I 1.5-3.0 11,000 125mm Wires 2 8.5 23.5 x 27 $1.25 $1.15
89
850647 J 3.0-6.0 6 0.26 17,000 20.72 Solder 2 6.5 23.5 x 27 85 79
69
850887 K 6.0-12.0 12 0.14 12,500 44.2 Solder 2 10 24 x 32 $1.75 $1.50 $1.35
850941 L 6.0-12.0 12 0.7 16,200 236.5 Solder 3 8.5 35.7 x 71.5 $7.95 $7.25 $6.95
850962 L 12.0-30.0 30 1.31 12,800 238.4 Solder 3 8.5 35.7 x 71.5 $9.95 $8.95 $8.45
Motors
Motors and syringes not included.
R O B O T I C S MOTORS
Copyright Kelvin L.P.
1-800-535-8469 (9AM to 5PM E.S.T.) FAX: 1-800-756-1025 OR 1-631-756-1763 www.kelvin.com 29
260 Motor
1.5 to 3V DC, 120mA, 6,500 RPM, 51G-CM,
23x31mm. Shaft length is 6mm and the
shaft diameter is 2mm. FE-260-18130.
851342 ..............................$1.65 or $1.40 ea./10+
280 Motor
1.5 to 3V DC, 200mA, 8,200 RPM, 142G-
CM. The overall motor size is 23x34mm.
Shaft length is 10mm and shaft diameter
is 2mm. FE-280-2865.
851343 ..............................$1.65 or $1.40 ea./10+
370 Motor
12VDC, 16mA, 3500 RPM, 119G-CM. Add
a propeller and place in front of a fan to
make a great generator. Can light an LED.
Overall motor size is 24x33mm. Shaft
length is 9mm and shaft diameter is 2mm.
851360 ............................$3.45 or $2.95 ea./10+
Motor Speed Control Kit
Uses Pulse-Width Modulation
(PWM) to vary the speed of a DC
motor from 0 to 100%. It can be
used for any DC motors from 3 to
25 Volt with a 3 Amp maximum
current draw. It is ideal to control
the speed of a fan, toy motor, model train and so on.
841732 ..................................................................$15.95 or $14.95 ea./10+
100 Front Wheels w/ End Cap
100 Front Wheels w/ Ctr. Hole
200 Dragster Wheels, Rear
20 Mouse Trap Wheels
40 CD Wheel Adapters
100 Gear Wheels
100 Front Gear Wheels
100 2-1/4" Axles
100 2-1/2 Axles
100 Economy Gears
80 Economy Cams
1 Sprocket Chain
10 Worm Gears
10 Bevel Gears
10 Rack Gears
100 Economy Pulleys
20 Economy Motors
20 Hi-Speed Motors
24 Hi-Performance Motors
24 Hi-Speed Propellers
10 1" Boat Propellers
20 Motor Holders
30 Crank Handles
100 Spring Assortment
2 Motor/Gear Box Kits
1 BONUS: Storage Cart
Mechanical
and Prototype Pack
A variety of parts you need
for your technology and
mechanical design center.
BONUS!! Storage Cabinet!
841328 .......................... $359
Pictures for Illustration Only
8 Propellers
8 Gears
8 Cams
8 Pulley Packs
1 Basic Solar Motor (2,200 rpm)
4 Adv. Solar Motors (10,200 rpm)
4 High Speed Motors (17,000 rpm)
8 SUMO Motor (12,500 rpm)
Project
Parts Assortments
An ECONOMICAL variety of
parts you need for your
project.
841586 ..$9.95 or $8.95 ea./6+
Project Motors
Four kinds of motors -
ten motors total.
841585, $9.95
or $8.95 ea./6+
Mechanical Wind-Up
Motor
An alternative to battery-powered
motors. Will easily drive a mechanical
toy, car or boat! Includes a key. The
spindle diameter is 2mm.
281907 ....................$3.75 or $3.65 ea./3+
Junior Solar Sprint Competition Motors
WHEELS R O B O T I C S
Copyright Kelvin L.P.
30 www.kelvin.com KELVIN