0 évaluation0% ont trouvé ce document utile (0 vote)
661 vues8 pages
The document provides instructions for configuring VLAN 100 across two OLT devices to allow connectivity between ONUs connected to each OLT. It involves:
1) Configuring VLAN 100 on each OLT, assigning IPs and enabling ARP proxy.
2) Configuring the uplink ports on each OLT to trunk VLAN 100.
3) Allowing VLAN 100 as a trunk between the OLTs to provide connectivity between ONUs on different OLTs.
The document provides instructions for configuring VLAN 100 across two OLT devices to allow connectivity between ONUs connected to each OLT. It involves:
1) Configuring VLAN 100 on each OLT, assigning IPs and enabling ARP proxy.
2) Configuring the uplink ports on each OLT to trunk VLAN 100.
3) Allowing VLAN 100 as a trunk between the OLTs to provide connectivity between ONUs on different OLTs.
The document provides instructions for configuring VLAN 100 across two OLT devices to allow connectivity between ONUs connected to each OLT. It involves:
1) Configuring VLAN 100 on each OLT, assigning IPs and enabling ARP proxy.
2) Configuring the uplink ports on each OLT to trunk VLAN 100.
3) Allowing VLAN 100 as a trunk between the OLTs to provide connectivity between ONUs on different OLTs.
Admin# cd vlan Admin\vlan# set service <vlan_name> vid_begin 100 vid_end 100 trunk 1 tagged service_type 8 Admin\vlan# set vlan_slot slot 11 vid 100 tagged Admin\vlan# set super-vlan 1 Admin\vlan# set super-vlan 1 add sub-vlan 100 Admin\vlan# set super-vlan 1 ip 192.168.0.1 mask 255.255.255.0 Admin\vlan# set arp-switch 1 route enable inner-subvlan enable among-subvlan enable Admin\vlan# cd device Admin\device# set slot_separate disable Admin\device# cd ngn Admin\ngn# set arp_proxy_entity hsw enable Admin\ngn# cd route Admin\route# set access-list arplist ipv4 Admin\route# set access-list arplist permit 192.168.0.10/24 Admin\route# set access-list arplist permit 192.168.0.20/24 Admin\route# set arp-proxy access-list arplist enable 2 - Configuration on the ONUs
1 Configure Uplink
2 - Configuration on the ONUs
3 Allow VLAN 100 on switch ports trunk between OLTs
1 - Configuration on the OLT 1 Login in the OLT (telnet and enable mode) Admin# cd vlan Admin\vlan# set service <vlan_name> vid_begin 100 vid_end 100 trunk 1 tagged service_type 8 Admin\vlan# set vlan_slot slot 11 vid 100 tagged Admin\vlan# set super-vlan 1 Admin\vlan# set super-vlan 1 add sub-vlan 100 Admin\vlan# set super-vlan 1 ip 192.168.0.1 mask 255.255.255.0 Admin\vlan# set arp-switch 1 route enable inner-subvlan enable among-subvlan enable Admin\vlan# cd device Admin\device# set slot_separate disable Admin\device# cd ngn Admin\ngn# set arp_proxy_entity hsw enable Admin\ngn# cd route Admin\route# set access-list arplist ipv4 Admin\route# set access-list arplist permit 192.168.0.10/24 Admin\route# set access-list arplist permit 192.168.0.20/24 Admin\route# set arp-proxy access-list arplist enable 2 - Configuration on the OLT 2 Login in the OLT (telnet and enable mode) Admin# cd vlan Admin\vlan# set service <vlan_name> vid_begin 100 vid_end 100 trunk 1 tagged service_type 8 Admin\vlan# set vlan_slot slot 11 vid 100 tagged Admin\vlan# set super-vlan 1 Admin\vlan# set super-vlan 1 add sub-vlan 100 Admin\vlan# set super-vlan 1 ip 192.168.0.2 mask 255.255.255.0 Admin\vlan# set arp-switch 1 route enable inner-subvlan enable among-subvlan enable Admin\vlan# cd device Admin\device# set slot_separate disable Admin\device# cd ngn Admin\ngn# set arp_proxy_entity hsw enable Admin\ngn# cd route Admin\route# set access-list arplist ipv4 Admin\route# set access-list arplist permit 192.168.0.30/24 Admin\route# set arp-proxy access-list arplist enable
3 Configure Uplink in both OLTs
4 - Configuration on the ONUs
5 Allow VLAN 100 on switch ports trunk between OLTs