Vous êtes sur la page 1sur 2

8/12/2014 BSC6900 UMTS Product Documentation

http://localhost:7890/hdx.cgi?fe=1&lib=31184925&v=07&tocLib=31184925&tocV=07&id=WRFD%2d01061111&tocURL=resources%252fmbsc%252fm%252dbs 1/2
Configuring Downlink Enhanced CELL_FACH
This section describes how to activate, verify, and deactivate the optional feature WRFD-010688 Downlink
Enhanced CELL_FACH.
Prerequisites
Dependencies on Hardware
This feature does not have any special requirements for hardware.
Dependencies on Other Features
The configurations of the features on which this feature depends are complete. This
feature depends on the feature WRFD-010685 Downlink Enhanced L2.
License
The license controlling this feature has been activated.
Other Prerequisites
The UE should support this feature.
HBBI and HDLP on BTS3812E/BTS3812AE do not support this feature, EBBI, EDLP
is needed.
BBU3806 does not support this feature, EBBC or EBBCd is needed. EBBM is
needed by BBU3806C to support this feature.
3900 series NodeB: WBBPa does not support this feature, and WBBPb or WBBPd is
needed.
Context
This feature enables the FACH to be carried on the HS-DSCH. Based on this feature, the UE can receive
data at a higher rate in CELL_FACH state.
Procedure
Activation Procedure
1. Run the BSC6900 MML command MOD UCELLALGOSWITCH to select E_FACH
and DL_L2ENHANCED from the drop-down list Cell Hspa Plus function switch.
2. Run the BSC6900 MML command ADD UCELLHSDPA to add HUDPA parameters
of a cell.
3. Run the BSC6900 MML command ADD UCELLEFACH to add enhanced
CELL_FACH state parameters of a cell.
4. Run the BSC6900 MML command ACT UCELLHSDPA to activate HSDPA feature.
5. Run the BSC6900 MML command ACT UCELLEFACH to activate this feature.
Verification Procedure
1. Run the BSC6900 MML command DSP UCELL to check whether EFACH is
available.
The value of Status of EFACH is EFACH available.
Deactivation Procedure
8/12/2014 BSC6900 UMTS Product Documentation
http://localhost:7890/hdx.cgi?fe=1&lib=31184925&v=07&tocLib=31184925&tocV=07&id=WRFD%2d01061111&tocURL=resources%252fmbsc%252fm%252dbs 2/2
1. Run the BSC6900 MML command MOD UCELLALGOSWITCH to clear E_FACH
and DL_L2ENHANCED from the drop-down list Cell Hspa Plus function switch.
2. Run the BSC6900 MML command DEA UCELLEFACH to deactivate this feature.
Example
//Activating Downlink Enhanced CELL_FACH
MOD UCELLALGOSWITCH: CellId=11, HspaPlusSwitch=E_FACH-1&DL_L2ENHANCED-1;
ADD UCELLHSDPA: CellId=11, AllocCodeMode=Automatic, CodeAdjForHsdpaSwitch=ON;
ADD UCELLEFACH: CellId=11;
ACT UCELLHSDPA: CellId=11;
ACT UCELLEFACH: CellId=11;
//Deactivating Downlink Enhanced CELL_FACH
MOD UCELLALGOSWITCH: CellId=11, HspaPlusSwitch=E_FACH-0&DL_L2ENHANCED-0;
DEA UCELLEFACH: CellId=11;
Parent topic: RAN Feature Activation Guide
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.

Vous aimerez peut-être aussi