Académique Documents
Professionnel Documents
Culture Documents
April 2013
Supersedes issue dated August 2012
08_120806e-03/Page 1 of 4
Last change WF-No. 1746
Librel
RMX 26
= Registered trademark of BASF Multi-Micronutrient EDTA Chelate
08_120806e-03 April 2013 Page 2 of 4 Librel
RMX 26
Product Information
Product Type Mixture of micronutrients and secondary nutrients.
Intended Use To correct multiple micronutrient deficiencies in most agricultural, horticultural and
ornamental crops.
Typical Analysis
Element (%) Water Soluble
Boron
Copper
Iron
Magnesium
Manganese
Molybdenum
Zinc
(as B)
(as Cu)
(as Fe)
(as Mg)
(as Mn)
(as Mo)
(as Zn)
0.50
1.50
4.00
2.00
4.00
0.10
1.50
as inorganic salt
chelated by EDTA
chelated by EDTA
as inorganic salt
chelated by EDTA
as inorganic salt
chelated by EDTA
Practical pH Stability Range 4 9 (in aqueous solution)
Analytical Method Available upon request.
PRD-No.* 30569830
* BASFs commercial product numbers.
Solubility (in water) ~150 g/l @ 20 C
Typical Particle Size HELOS (H1539) & GRADIS, R7: 0.5/18.0...3500m
10 50 100 500 1000 5000
particle size/m
c
u
m
u
l
a
t
i
v
e
d
i
s
t
r
i
b
u
t
i
o
n
Q
3
(
x
)
%
100
90
80
70
60
50
40
30
20
10
0
d
e
n
s
i
t
y
d
i
s
t
r
i
b
u
t
i
o
n
q
3
l
g
(
x
)
3.00
2.75
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0
X10 m X50 m VMD m X90 m X100 m Peak m
138.6 223.1 236.6 353.7 600 223
Description Ethylenediamine tetraacetate (EDTA) chelates of iron, copper, manganese and
zinc as their sodium or disodium salts, also inorganic salts of boron, molybdenum
and magnesium.
Appearance Green spray agglomerated microgranule.
08_120806e-03 April 2013 Page 3 of 4 Librel
RMX 26
Specification See separate document: Standard Specification available via BASFs WorldAccount:
https://www.worldaccount.basf.com (registered access).
Packaging Detailed information on the packaging is available via BASFs WorldAccount:
https://www.worldaccount.basf.com (registered access).
Storage a) Librel
RMX 26
has a shelf life of at least four years in its original packaging.
Safety We know of no ill effects that could have resulted from using Librel
RMX 26 for
the purpose for which it is intended and from processing it in accordance with
current practices.
According to the experience that we have gained over many years and other
information at our disposal, Librel
RMX 26
Directions For Use
General Information Librel
RMX 26 gives best results when crops have adequate supplies of water and
major nutrients and are not under stress for any other reason. Conditions that are
responsible for one particular deciency can also induce deciencies of other
micronutrients. Always ensure that deciencies are conrmed before treatment is
carried out.
Rates of use and method of application depend on local practices, crop, degree
of deciency, etc.
Mixing With Water Simply add the powder, slowly, to water while it is being agitated, do not pre-mix.
Continue agitation for a short while to ensure the product is completely dissolved.
Compatibility Librel
RMX 26 is compatible with all other Librel chelates and many crop care
chemicals. It is also fully compatible with solutions containing soluble phosphates
such as liquid feeds and foliar fertilisers.
Statutory Caution To be used only where there is a recognised need. Do not exceed the appropriate
dose rate.
Note This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors may
affect processing or application/use, we recommend that you make tests to
determine the suitability of a product for your particular purpose prior to use. It
does not relieve our customers from the obligation to perform a full inspection of
the products upon delivery or any other obligation. NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE
CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.
April 2013