0 évaluation0% ont trouvé ce document utile (0 vote)
103 vues13 pages
Tenderers are advised to visit the site and acquaint themselves with the surroundings and take any measurements deem necessary. Tenderers shall provide all materials, labour and plant required to execute the relative works. Any disposal of demolished / unwanted material should be dumped in an approved dumping site and any related fees to be borne by the tenderer.
Tenderers are advised to visit the site and acquaint themselves with the surroundings and take any measurements deem necessary. Tenderers shall provide all materials, labour and plant required to execute the relative works. Any disposal of demolished / unwanted material should be dumped in an approved dumping site and any related fees to be borne by the tenderer.
Tenderers are advised to visit the site and acquaint themselves with the surroundings and take any measurements deem necessary. Tenderers shall provide all materials, labour and plant required to execute the relative works. Any disposal of demolished / unwanted material should be dumped in an approved dumping site and any related fees to be borne by the tenderer.
Item Description Quantity Unit incl. Vat Incl. Vat
Euro Euro Bill no. 1 Demolition / Structural Alterations Preambles a Tenderers are advised to visit the site and acquaint themselves with the surroundings and take any measurements deem necessary as no claims will be accepted due to lack of knowledge of the site. b Tenderers are to ensure that during the course of works the inconvenience to third parties should be very minimal and special care should be taken to existing surroundings. c Tenderers shall provide all materials, labour and plant required to execute the relative works. d Tenderers are informed that works on site may be interrupted to allow for other works to be undertaken by third parties. e All precautionary measures should be taken for the whole works to be carried out in conformity with the local national Health and Safety Regulations. Any related fees to be borne by the tenderer. f Any disposal of demolished / unwanted material should be dumped in an approved dumping site and any related fees to be borne by the tenderer. g Rates are to include for working by hand including any double handling for removal or providing of any materials, hoisting, lowering, transporting and disposal. h Quantities shall be measured net and no openings shall be deucted. Rates are to include for all the waste and straight / circular work. c/f BILL C - STRUCTURAL AND FINISHING WORKS BOQ C - Structural and Finishing (2) 1 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro b/f i Rates for openings are to include for all the necessary masonry works such as any necessary joggle joints, perpendicular jambs, etc. as required by trade and as approved by architect. 1.01 Break up, remove, cart away and dispose of all existing wall ceramic tiles including the removal of all sanitary fittings, fixtures and ware. Load, cart away and dipose of resultant material. 1.00 item 1.02 Disconnect and plug adequately both the direct / indirect water supply to premises. Take up, remove, and dispose of all the plumbing and drainage pipework system (either surface mounted and/or embedded in walls / floors and including any holding clips / brackets) other related fittings and fixtures. Rate is also inclusive for all material is to be loaded, carted away and disposed of. 1.00 item 1.03 Take down, remove, load, cart away and dipose of all existing internal only timber, (single and / or double leaf) doors, cupboards, high level timber skirting, glazed timber 'anti-porta' and all other apertures and/or furniture. Material will become the property of the tenderer. 1.00 item 1.04 Ditto but heavy duty single and/or double leaf metal door. 2.00 no. 1.05 Take down, remove, load, cart away and dispose of all existing internal aluminium (single and / or double leaf) doors, cupboards, partition walls including glazing and partition doors, venetion and vertical blinds, metal railings and all other furniture. Material will become the property of the tenderer. Item does not include windows. 1.00 item 1.06 Ditto but timber/gypsum parition walls including partition doors. 1.00 item c/f BOQ C - Structural and Finishing (2) 2 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro b/f 1.07 Take down, remove, load, cart away and dispose of all existing suspended ceiling soffits. Rate is inclusive of the removal of all framing, brackets and/or clips soffit panels, etc. 1.00 item 1.08 Break up, remove, load, cart away and dispose of all the existing (2 layers) of terrazzo / cement floor tiles, including any timber flooring attached and any surrounding skirting. Torba bed is to be left on site for re-use but any buried unusable utilities are to be removed. 752.04 sq.m 1.09 Take down existing single skin walls up to 2 courses below exsiting dpc level including any suspended steel beams and breaking up of any concrete plinths. Load, cart away and dispose of material. 50.00 sq.m 1.10 Adequately block up window on the external side with single skin softstone (fair faced & 'Fuq il-Fil finish'), neatly laid to match faade courses and pointed with cement/lime mortar. ref. w 8 1.00 no. 1.11 Ditto including also on the inner side. ref. w 9 1.00 no. 1.12 Block up existing door opening in single skin walls (dims. n.e. 1.82m x 2.20m). Rate is to include for all the necessary masonry works to start from foundations (thus including any excavation, foundation concrete and dpc layer) and to be made flush to the existing walls from both sides. ref dr.1; dr.3 dr.5; dr.6 4.00 no. 1.13 Ditto but in double skin wall. ref dr.7 1.00 no. 1.14 Form door opening in existing single skin softstone wall, (dims n.e. 1.52m x 2.20m). Rate is to include for the formation perpendicular jambs and the supply and fixing of softsone lintols. ref do.1; do.2; do.5; do.9; do.10; do.11; do.12; do.13. 9.00 no. c/f BOQ C - Structural and Finishing (2) 3 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro b/f 1.15 Ditto but in double skin wall ref do.7 1.00 no. 1.16 Construct 175mm thick single skin walls, set and laid in gauged mortar. Rate is also to include fro any excavation until rock is exposed, concrete strip footing, dpc layer and wall bearing (mursalli) to existing walls. 170.00 sq.m 1.17 Form door opening n.e. 1000mm wide from existing dor opening n.e. 1600mm wide in single skin wall. ref do.7; do.8 2.00 no. 1.18 Form door opening n.e. 1000mm wide from existing dor opening n.e. 1200mm wide in single skin wall. ref do.6 1.00 no. 1.19 Scrape off existing deteriorated / spalling, concrete / plaster, expose reinforcement and prepare patch for curing. Sand down reinforcement, clean area and apply approved rust inhibitor to reinforcement and approved mortar to cover up patch as directed and to the approval of the architect in charge. 75.00 sq.m 1.20 Carefully take down and remove any deteriorated softstone blocks from walls and replace by new and accordingly cut to size softstone blocks with gauged mortar. 30.00 sq.m 1.21 Take up and/or repair and/or patch up exsiting deteriorated waterproofing membrane by new torch welded 3.5mm thick water proofing membrane. 10.00 sq.m Bill no. 1 Demolition / Structural Alterations Works c/f to summary BOQ C - Structural and Finishing (2) 4 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro Bill no. 2 Tiling, Sanitary Ware and Marble Works Preambles a All works shall be measured net as laid. Rates are to include for all waste, straight or raked cutting, any pattern, fixing with sand / cement (1:3) mortar and grouting of joints with approved coloured grouting material. b For wall tiling, rates are to include for the necessary hacking of walls as and where necessary. c Colour and / or pattern, if any, of wall tiles is to be decided by architect in charge. d Supply and fixing of fixtures and other fittings. Colour to match the wall or floor tiling or as approved by architect in charge. e All sanitary fixtures are deemed to be including all the necessary 32 / 50 /110mm diameter pvc drain pipes connections, fittings, ironmongery and any chasing in wall for foul water run off from fixture to the drainage system,. 2.01 Supply, spread and level bed of 10 mm chippings/sand 75mm (average) thick, over existing torba or as where required to make up levels to receive floor tiles. Rate is also inclusive for the provision and fixing of pvc damp proofing fixed to perimeter walls to eliminate dampness due to any new finished floor levels. 752.04 sq.m 2.02 Supply and lay in cement and sand mortar, gress ceramic floor tiles, semi matt and non slip as per specifications, dims 600mm x 600mm for internal use. Rate also includes for the grouting of joints with approved material. 752.04 sq.m 2.03 Glazed ceramic wall tiles, as per specifications, dims 600mm x 300mm. Rate is also inclusive for the supply and fix of pvc edging finishing strips. 130.00 sq.m c/f BOQ C - Structural and Finishing (2) 5 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro b/f 2.04 Vitreous china wash hand lavatory basin (without column) fixed with pair of brackets, waste fittings and chain, a pair of chrome pillar cocks for hot and cold water supply, 30mm diameter plastic bottle trap, 2no. Chrome plated angle valves and flexible connectors. 7.00 no. 2.05 Vitreous china low level water closets complete with a heavy duty plastic cover and push button flushing cistern (cistern to be fixed behind wall), chrome plated angle valve complete with flexible connector. 5.00 no. 2.06 Complete vitreaous china set for handicap use including wash hand basin, water closet with flushing water cistern and grab rails and all relative angle valves, connectors, etc. 2.00 no. 2.07 Vitreous china Toilet roll holder (recessed type). 7.00 no. 2.08 Ditto but soap holders. 7.00 no. 2.09 Ditto but towel rails. 7.00 no. Bill no. 2 Tiling, Sanitary Ware and Marble Works c/f to summary BOQ C - Structural and Finishing (2) 6 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro Bill no. 3 Plastering and Decorating Works a No openings whatsoever will be deducted for the purpose of measurements. b Rendering to window cills, lintels and jambs are to be included in the works. 3.01 Strip off / sand down and remove existing wall painting/finishes until original softstone surface is exposed. 2,507.78 sq.m 3.02 Hacking of walls as and where necessary prior to any rendering / plastering keying. 100.00 sq.m 3.03 Clean down, scrape where required, rake out joints and point with lime / cement mortar surface of walls, internally. 2,507.78 sq.m 3.04 Rendering in gypsum plaster 10mm thick, starting with a base coat and finished by a top coat in white gypsum plaster obtaining a straight and level finish surface on horizontal and verical planes including the provision and fixing of aluminium angle beads around openings and/or wall edges. 350.00 sq.m 3.05 Prepare surfaces and apply two finishing coats of approved emulsion paint, to wall surfaces including gypsum partition surfaces. Colours to be approved by architect in charge. 2,957.78 sq.m 3.06 Supply 600mm x 600mm mineral fibre tagular type suspended ceiling with white in colour exposed fixed in position with approved hangers at 1.20m intervals and all necessary and relevant ironmongery. Lighting fixtures are not included. 500.00 sq.m c/f BOQ C - Structural and Finishing (2) 7 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro b/f 3.07 Provide and fix gypsum boards suspended false ceiling, including all necessary framing, fixing, brackets and ironmongery all as approved by architect in charge. Lighting fixtures are not included. 50.00 sq.m 3.08 Provide and instal 100mm thick gypsum partition wall, mounted and fixed on galvanized steel support frame including rock wool infill and min 16mm thick gypsum boards on both sides. 20.00 sq.m 3.09 Ditto but inclufing fire proof proof material. 28.00 sq.m 3.10 Provide and instal 150mm thick gypsum partition wall, mounted and fixed on galvanized steel support frame including rock wool infill and min 2 no. 16mm thick gypsum boards on both sides. 7.70 sq.m 3.11 Extra over item 3.10 for the supply and fixing of single leaf door (dims. n.e. 1000mm x 2120mm). 1.00 no. Bill no. 3 - Plastering and Decorating Works Carried to Summary BOQ C - Structural and Finishing (2) 8 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro Bill no. 4 Aluminium, Timber and Metal Works a Rates for aluminium works are to include for manufacture, fixing, sections to be dark green in colour to match existing aluminium sections. All doors and windows are to include double galzing (otherwise as indicated) , all necessary fittings and the sealing with approved mastic material both internally and externally. b Rates for internal joinery are to include for the manufacture and fixing of solid, laminated surfaces flush doors inclusive of all necessary frames / lining / architraves and glazing if and where necessary. c Rates for metal works are to include for hot dip galvanizing, 2 coats of calcium plumbate paint and all the necessary ironmongery. d Sizes stated in bill of quantities are only indicative and tenderer is responsible for taking physical measurements of all openings on site. 4.01 Aluminium, window with fixed lower part and top hinged outwards including single glazed obscurred glass. (approx. dims.0.60m x 0.80m) 7.00 no. 4.02 Timber, single leaf internal flush doors. (approx. dims. n.e. 1.20m x 2.5m). 21.00 no. 4.03 Extra over previous item for the supply and fixing of electric locks. 3.00 no. 4.04 Ditto but double leaf internal flush doors. (approx. dims. n.e. 2.00m x 2.5m). 7 no. 4.05 Ditto but fire doors and including magnet hold open position. Tenderer is to provide an official certification. 2 no. c/f BOQ C - Structural and Finishing (2) 9 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro b/f 4.06 Maintenace to existing 2 leaf timber main entrance door. Strip off existing paint, repair timber where and as required, apply 1 undercoat and 2 coats gloss oil paint, replace any existing defective ironmongery with new. Rate is to apply for both sides of the door. (approx. dims. n.e. 2.50m x 3.00m). 1 no. 4.07 Maintenace to existing 2 leaf metal main entrance door. Sand down existing paint, repair where and as required, apply 1 undercoat and 2 coats gloss oil paint, replace any existing defective ironmongery with new. Rate is to apply for both sides of the door. (approx. dims. n.e. 1.80m x 3.00m). 1 no. Bill no. 4 Aluminium, Timber and Metal Works Total carried to Summary BOQ C - Structural and Finishing (2) 10 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro Bill no. 5 Plumbing Works Preambles a All items in this bill are subject to measurement. b Supply, install, test and commission the following. 5.01 Provide and instal approved type upvc plumbing pipes including relative fittings for both cold and hot water plumbing system. Rate is inclusive for all the necessary bracketing, supports, chasing in walls and well clipped pipework. Chases shall also be made good in 1:3 cement/sand mortar. a 16mm diameter 100.00 m b 22mm diameter 50.00 m 5.02 Connect water supply of new plumbing system with existing. Rate is inclusive of all the necessary fittings, gate valves, reducers, etc. to provide an efficient water supply. 1.00 no. 5.03 Testing and commissioning of complete system 1.00 no. 5.04 Provide one set negatives and two sets of prints of as fitted drawings 1.00 no. Bill no. 5 Plumbing Works Total carried to Summary BOQ C - Structural and Finishing (2) 11 of 13 20/06/12 Rate Amount Item Description Quantity Unit incl. Vat Incl. Vat Euro Euro Bill no. 6 - Drainage Works Preambles a Pipes shall be measured in metres over all fittings and branches. b Fittings shall be enumerated and given as extra over the pipe in which they occur. Joints in the running length should be deemed to be included. c All builders' work, connection to existing drainage mains and testing and commissioning shall be deemed to be included. d Inspection chamber manholes shall include for all necessary excavation, connecting up and shall be enumerated. 6.01 Excavate trenches in any type of material to accommodate upvc pipes (measured separately) to the required levels, load, cart away and dispose of material. 22.50 cu.m 6.02 Provide and cast concrete grade C.25 to bed and square surround to 110mm diameter pipes. 10.13 cu.m 6.03 Provide, lay and align heavy duty 110mm diameter uPVC pipes in trenches as directed inclusive of all necessary fittings (e.g. bends, gulleys, hoppers, y's, etc.) 65.00 m 6.04 Provide and fix heavy duty 600mm x 600mm manhole including cover lids including all necessary concrete grade C20 bedding and surround. 4.00 no. Bill no. 6 - Drainage Works Total carried to Summary BOQ C - Structural and Finishing (2) 12 of 13 20/06/12 BILL C - GENERAL SUMMARY Tender for Civil / Repair Works and Finishings at the Evans Building, Lower Level, Valletta. 1.00 Bill no. 1 Demolition / Structural Alterations Works 2.00 Bill no. 2 Tiling And Sanitary Ware 3.00 Bill no. 3 Plastering and Decorating Works 4.00 Bill no. 4 Aluminium, Timber and Metal Works 5.00 Bill no. 5 Plumbing Works 6.00 Bill no. 6 Drainage Works Grand Total BOQ C - Structural and Finishing (2) 13 of 13 20/06/12