Académique Documents
Professionnel Documents
Culture Documents
product
range
SCHMOLZ + BICKENBACH Group
Eupener Strae 70
D-40549 Dsseldorf / Germany
www.schmolz-bickenbach.com
0.8 130 mm
2 60 mm
2 60 mm
2 18 mm
10 x 3 100 x 40 mm
Stainless and heat-resistant steel
Tool steel
Engineering steel
Aerospace materials
Austenitic
Duplex steels
Ferritic
Martensitic
Alloyed / unalloyed
Cold-work tool steels
High-speed steels
Hot-work tool steels
Plastic mould steels
Alloyed / unalloyed
Case hardening steels
Creep-resistant
structural steels
Free cutting steels
High-grade steels
Nitriding steels
Quenched and
tempered steels
Wear-resistant steels
Drill collars
diameter up to 280 mm
(round)
length up to 10 m
Pre-machined
rotationally symmetrical
forgings forged to shape
Pre-machined rotationally
symmetrical forgings
forged to shape
Welded
Outside diameter: 10.2 711 mm
Wall thickness: 1.4 32 mm
Seamless
Outside diameter: 17.2 660 mm
Wall thickness: 4.5 100 mm
0.8 130 mm
2 22 mm
2 18 mm
0.8 250 mm
Drawn: up to 100 mm
Ground bright: 110 150 mm
7 100 mm
2 60 mm
6 x 3 mm 500 x 40 mm
Width: up to 2000 mm
Thickness: 2 205 mm
Width: up to 2000 mm
Thickness: 0.5 50 mm
Length: up to 6000 mm
Wire rod
5 32 mm
12,4 28 mm
Drawn wire
0.013 22 mm
Coils, spools,
baskets, reels
Profiles
1 60 mm
2
Coils, reels,
straightened products
Wire rod
5.5 27 mm
Wire rod
5.5 27 mm
Ingots
0.6 40 t
Continuous casting
138, 150, 265 mm
475 x 340 mm
Semi-finished products
50 320 mm,
rising in 1 mm increments
Ingots
1 40 t
Continuous casting
138, 150, 265 mm
475 x 340 mm
Semi-finished products
50 320 mm,
rising in 1 mm increments
Ingots
1 40 t
Continuous casting
138, 150, 205, 265 mm
475 x 340 mm
Semi-finished products
50 320 mm,
rising in 1 mm increments
7 250 mm
50 160 mm
Width: 80 510 mm
Thickness: 24 160 mm
Width/thickness
ratio 10:1 max.
Open-die forgings,
rotationally symmetrical
forgings forged to shape
on request up to 50 t
single-piece weight
65 700 mm
50 750 mm
Single-piece weight
up to 23 t
Open-die forgings, rotationally
symmetrical forgings forged
to shape on request up to
50 t single-piece weight
65 900 mm
50 750 mm
Single-piece weight
up to 23 t
Open-die forgings,
rotationally symmetrical
forgings forged to shape
on request up to 50 t
single-piece weight
65 900 mm
50 750 mm
Single-piece weight
up to 23 t
Pre-machined parts, turned
parts, pre-machined moulds,
dies and frames to customer
specification
Cold rolls
20 750 mm diameter
Mandrels diameter
up to 280 mm (round)
length up to 28 m
Pre-machining Tubes Forged products /
Extruded aluminium
products
Bright steel Hot bars
rolled
Wire rod /
Drawn wire
Sheet steel Ingots
Continuous casting
Semi-finished products
Standard product range
Steel
7 250 mm
3 60 mm
50 160 mm
Width: 80 510 mm
Thickness: 24 160 mm
Width/thickness
ratio 10:1 max.
7 250 mm
50 160 mm
Width: 80 510 mm
Thickness: 24 160 mm
Width/thickness ratio 10:1 max.
Ferro-Titanit