P.O. Box 778 2900 AT Capelle aan den IJssel The Netherlands Tel: +31 10 2402 111 Fax: +31 10 2402 119 e-mail: europecontact@eastman.com
72.001-E10 November 2005 (supersedes 72.001-E9)
Piccotac 1095-N - 72.001-E10 page 1
Piccotac 1095-N Hydrocarbon Resin
Piccotac 1095-N Hydrocarbon Resin is a narrow-molecular-weight-distribution, aliphatic hydrocarbon resin designed for the adhesives industry. Its polymerisation process closely resembles that used by Eastman for the production of Piccotac 1095 Resin and the resin grades therefore show very similar physical and applicational properties.
PRODUCT SPECIFICATIONS 1 Softening point, Ring & Ball, C 94-100 Colour, Gardner, 50% resin solids in toluene max 5
TYPICAL PROPERTIES Softening point, Ring & Ball, C 96 Colour, Gardner, 50% resin solids in toluene 3 Density at 25 C, kg/dm3 0.95 Molecular weight, Size Exclusion Chromatography, Mw 2000 Mn 1200 Mw/Mn 1.7 Mz 3600 Melt viscosity, mPa.s at 120 C 23000 140 C 3100 160 C 750
OUTSTANDING CHARACTERISTICS Compatible at all ratios, or in limited but practically useful proportions, with natural and synthetic rubbers, EVA (ethylene-vinyl acetate) copolymers, SIS (styrene-isoprene-styrene) block copolymers, low molecular weight polyethylene, paraffin and microcrystalline waxes.
Soluble at all useful proportions in aliphatic, aromatic and chlorinated hydrocarbons, esters and ethers. Insoluble in alcohols, glycols and water.
REGULATORY STATUS Piccotac 1095-N Hydrocarbon Resin is in compliance with the requirements of the U.S. Food and Drug Administration for use in food packaging and food processing operations as specified in the Code of Federal Regulations, Title 21, under the following sections and subject to the provisions therein:
Piccotac 1095-N - 72.001-E10 page 2
175.105 Adhesives 175.300 Resinous and polymeric coatings 176.170 Components of paper and paperboard in contact with aqueous and fatty foods 176.180 Components of paper and paperboard in contact with dry food 177.1210 Closures with sealing gaskets for food containers
Piccotac 1095-N Hydrocarbon Resin is in compliance with the requirements of the Bundesinstitut fr Risiko- bewertung (BfR) of the Federal Republic of Germany for use in food packaging and food processing operations as specified in the BfR Recommendations, under the following chapters and subject to the provisions therein:
Chapter XXV Paraffin and microcrystalline waxes and blends of these with waxes, resins and polymers
In some European countries, Piccotac 1095-N Hydrocarbon Resin is permitted for use as a component in several food- contact applications. Because of the variation in legislation from country to country, detailed listings have not been included in this datasheet. Specific information may be obtained by consulting the regulations themselves. Eastman will be pleased to provide further information if required.
Piccotac 1095-N Hydrocarbon Resin is in compliance with the requirements of the European Toy Safety Legislation 88/378/EEC, European Standard CEN EN 71, Part 3: migration of certain elements.
All components used for the production of Piccotac 1095-N Hydrocarbon Resin are listed in the European Inventory of Existing Commercial Chemical Substances (EINECS).
PACKAGING AND SUPPLY Piccotac 1095-N Hydrocarbon Resin is pastillated and packed in polyethylene bags of 20 kg net, and supplied on shrink- wrapped pallets of 50 bags (1000 kg) each, from Eastman's facilities in The Netherlands and from warehouses located in Europe.
STORAGE AND INVENTORY CONTROL Flaked and pastillated forms of resins may fuse, block or lump under any of the following conditions: (1) in hot weather climates, (2) if stored near steam pipes or other sources of heat and (3) upon prolonged storage. Storage at temperatures above 30 C should be avoided. Inside storage in a temperature-controlled area is necessary in order to prevent problems, such as lumping. Due to the nature of the product, claims regarding lumping cannot be accepted.
Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.
Piccotac 1095-N Hydrocarbon Resin material will remain within product specification limits, as mentioned under the heading "Product Specifications", for a period of at least twelve months after shipment from Eastman's production facilities in The Netherlands, provided storage conditions outlined in this data sheet are observed.
However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, we recommend that the material be tested upon receipt.
PRODUCT SAFETY Safety Data are available upon request.
Alterations in this issue: changed : Trademark, Sales Address, Storage and Inventory Control, Regulatory Status deleted : No deletions added : No additions