Vous êtes sur la page 1sur 1783

136077411.xls.

ms_office
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
support@huawei.com
Copyright Huawei Technologies Co., Ltd. 2009. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
RNC
V200R009
Address:
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company
headquarters.
Huawei Technologies Co., Ltd.
BSC6810 V200R011C00SPC100
Parameter Reference
3/24/2013 11783
136077411.xls.ms_office
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company
headquarters.
BSC6810 V200R011C00SPC100
Parameter Reference
3/24/2013 21783
136077411.xls.ms_office
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
3/24/2013 31783
136077411.xls.ms_office
Purpose
This describes RNC parameters, including the meaning, values, and usage of RNC parameters.
Version
The product version related to this document is: BSC6810 V200R011C00SPC100.
Intended Audience
Network planners
Field engineers
System engineers
Shift operators
Organization
Each parameter is described in the following aspects.
Description
Parameter ID
Parameter Name
MML Command
NE
Meaning
Value Type
GUI Value Range
Actual Value Range
Unit
Default Value
Recommended Value
Impact
Parameter Relationship
Service Interrupted After Modification
Interruption Scope
Interruption Duration (min)
Caution
3/24/2013 41783
136077411.xls.ms_office
Access
Attribute
Introduced in Version
3/24/2013 51783
136077411.xls.ms_office
This describes RNC parameters, including the meaning, values, and usage of RNC parameters.
The product version related to this document is: BSC6810 V200R011C00SPC100.
Each parameter is described in the following aspects.
Remarks
Simple string for identifying a parameter
Full name of the parameter
Commands for setting the parameter, and optional/mandatory attribute of the
parameter in each command
NEs on which the parameter is set
Functions, functioning ways, and protocols of the parameter
Parameter value type
Parameter value range displayed on the GUI
Actual parameter value range corresponding to the GUI Value Range. For
example, the GUI Value Range is 0, and the corresponding Actual Value
Range is OFF.
Parameter value unit
Initial value provided by the system
Values recommended in different scenarios
Parameter impact scope, that is, objects specified when the parameter is set
Relationship between this parameter and other parameters. For example, to
use this parameter, you need to set related switches and parameters.
Whether modifying the parameter value may interrupt the existing services
Possible interruption scope in the case that modifying the parameter value
may interrupt the existing services
Possible interruption duration in the case that modifying the parameter value
may interrupt the existing services
Cautions to be taken during the modification
3/24/2013 61783
136077411.xls.ms_office
Whether this parameter is read/write or read only
Whether this parameter is a radio parameter, a transport parameter, or an
equipment parameter
Version in which this parameter is introduced
3/24/2013 71783
Parameter ID Parameter Name MML Command NE
AAL2PATHT AAL2 Path Type ADD AAL2PATH(Mandatory) RNC
AbsTime Specify Time SET POOLPRIMHOSTPOLICY(Mandatory) RNC
Ac09ToAsc AC 0~9 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
Ac10ToAsc AC 10 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
Ac11ToAsc AC 11 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
Ac12ToAsc AC 12 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
Ac13ToAsc AC 13 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
Ac14ToAsc AC 14 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
Ac15ToAsc AC 15 to ASC mapping ADD PRACHACTOASCMAP(Optional) RNC
AccessServiceClass Access service class ADD PRACHASC(Mandatory) RNC
ACFC Address and control field compress
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
RNC
AcIntervalOfCell AC Restriction Interval Of Cell SET ACALGO(Mandatory) RNC
AcIntervalOfCells Access Class Restriction interval between Cells SET DSACAUTOALGO(Mandatory) RNC
AcRange Range of restrained Access Class
SET
DSACAUTOALGO(Mand
atory)
ADD
CELLDSACMANUALPA
RA(Mandatory)
RNC
AcRestriction AC Restriction Indicator ADD CELLDSACMANUALPARA(Mandatory) RNC
AcRstrctIntervalLen Interval length of Domain Specific Access Class Restriction
SET
DSACAUTOALGO(Mand
atory)
SET
ACALGO(Mandatory)
ADD
CELLDSACMANUALPA
RA(Mandatory)
RNC
AcRstrctPercent AC Restriction Percent SET ACALGO(Mandatory) RNC
AcRstrctSwitch AC Restriction Switch SET ACALGO(Optional) RNC
ACTOBJECT Activate Object ACT LICENSE(Optional) RNC
ACTTYPE Type ACT GPS(Mandatory) RNC
ACU Added CPU occupancy STR CPUUSAGETST(Mandatory) RNC
AFSetObj AFSetObj SET ADMCTRL(Mandatory)RNC
AgpsActivateFlag A-GPS Method Active Flag ADD SMLCCELL(Optional)RNC
AGPSAddAssDataSendFlag A-GPS Additional Data Send Flag SET SMLC(Optional) RNC
AGPSMethodType A-GPS Method Type SET SMLC(Optional) RNC
AGPSRECEIVERID GPS ID
ADD GPS(Mandatory)
ACT GPS(Mandatory) RNC
AGPSRECEIVERTYPE GPS type ADD GPS(Mandatory) RNC
AICHPowerOffset AICH power offset ADD CHPWROFFSET(Optional) RNC
AICHTxTiming AICH transmission timing ADD AICH(Optional) RNC
aid Alarm ID
SET
ALMLVL(Mandatory)
SET BOXRPT(Mandatory)
SET ALMPORT(Optional)
RNC
AlignMode align type SET HSSCCHLESSOPPARA(Mandatory) RNC
AllBw Bandwidth ADD RSCGRP(Mandatory) RNC
AllocCodeMode Allocate Code Mode ADD CELLHSDPA(Optional) RNC
ALTITUDE GPS antenna altitude ADD GPS(Mandatory) RNC
ALTITUDEIMP GPS antenna altitude ADD GPS(Mandatory) RNC
alvl Alarm Severity SET ALMLVL(Mandatory) RNC
AmntOfRpt2B 2B event retry max times
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
AmntOfRpt2C 2C event retry max times
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
RNC
AmntOfRpt3A 3A event retry max times
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
AmntOfRpt3C 3C event retry max times
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
AmRlcCfgPara RLC AM mode parameters selection ADD TYPRABRLC(Mandatory) RNC
AMRQosPerform QOS Switch For AMR Traffic SET QOSACT(Optional) RNC
AmrRabAbnormRelRatioThdAMR call drop ratio Per Spu SET KPIALMTHD(Optional) RNC
AmrRabEstabAttMinNum The minimum of AMR Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC
AmrRabEstabSuccRatioThd AMR Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC
AmrRabRelMinNum The number of AMR drop Per Spu SET KPIALMTHD(Optional) RNC
AmrUlRateAdjTimerLen Wait Timer For AMR Uplink Rate SET QOSACT(Optional) RNC
ANI Adjacent Node ID
ADD
ADJNODE(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
AAL2RT(Mandatory)
ADD
ADJMAP(Mandatory)
ADD IPPATH(Mandatory)
ADD
IPPATHBIND(Mandatory)
ACT IPPM(Mandatory)
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
RNC
AntennaAltitudeMeter Cell Antenna Altitude ADD SMLCCELL(Optional)RNC
AntennaAltitudeMeterImp Cell Antenna Altitude ADD SMLCCELL(Optional)RNC
AntennaLatitudeDegree Cell Antenna Latitude ADD SMLCCELL(Optional)RNC
AntennaLatitudeDegreeSec Cell Antenna Latitude ADD SMLCCELL(Optional)RNC
AntennaLongitudeDegree Cell Antenna Longitude ADD SMLCCELL(Optional)RNC
AntennaLongitudeDegreeSecCell Antenna Longitude ADD SMLCCELL(Optional)RNC
AntennaOpening Cell Antenna Opening ADD SMLCCELL(Mandatory) RNC
AntennaOrientation Cell Antenna Orientation ADD SMLCCELL(Mandatory) RNC
APFlag APFlag ADD NRNCCELL(Optional)RNC
APP Application type ADD SCTPLNK(Mandatory)RNC
AppliedDirect RAB applied direction ADD TYPRABBASIC(Mandatory) RNC
AREAFLAG Area flag SYN BRDAREA(Optional) RNC
AREAFLAG Area flag LOD PATCH(Optional) RNC
ARP10Priority User_priority of Allocation/Retention priority 10 SET USERPRIORITY(Optional) RNC
ARP11Priority User_priority of Allocation/Retention priority 11 SET USERPRIORITY(Optional) RNC
ARP12Priority User_priority of Allocation/Retention priority 12 SET USERPRIORITY(Optional) RNC
ARP13Priority User_priority of Allocation/Retention priority 13 SET USERPRIORITY(Optional) RNC
ARP14Priority User_priority of Allocation/Retention priority 14 SET USERPRIORITY(Optional) RNC
ARP1Priority User_priority of Allocation/Retention priority 1 SET USERPRIORITY(Optional) RNC
ARP2Priority User_priority of Allocation/Retention priority 2 SET USERPRIORITY(Optional) RNC
ARP3Priority User_priority of Allocation/Retention priority 3 SET USERPRIORITY(Optional) RNC
ARP4Priority User_priority of Allocation/Retention priority 4 SET USERPRIORITY(Optional) RNC
ARP5Priority User_priority of Allocation/Retention priority 5 SET USERPRIORITY(Optional) RNC
ARP6Priority User_priority of Allocation/Retention priority 6 SET USERPRIORITY(Optional) RNC
ARP7Priority User_priority of Allocation/Retention priority 7 SET USERPRIORITY(Optional) RNC
ARP8Priority User_priority of Allocation/Retention priority 8 SET USERPRIORITY(Optional) RNC
ARP9Priority User_priority of Allocation/Retention priority 9 SET USERPRIORITY(Optional) RNC
ARPRETRY ARP packet resend times STR IPCHK(Optional) RNC
ARPTIMEOUT ARP packet time-out STR IPCHK(Optional) RNC
ATMLOGICPORT The ATM Logic Port Number STR NODEBBWRPT(Mandatory) RNC
ATMSN NodeB ATM_TRANS Slot No. ADD NODEBIP(Mandatory)RNC
ATMSRN NodeB ATM_TRANS Subrack No. ADD NODEBIP(Mandatory)RNC
ATT Attach/detach indication ADD CNDOMAIN(Optional) RNC
AUTHMODE Validate mode
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
RNC
AUTHNAME Validate user name
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
RNC
AUTHPWD Validate password
ADD
PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
RNC
AUTHTYPE Validate protocol type
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
RNC
AUTO Auto negotiation SET ETHPORT(Optional) RNC
AvailablesignatureEndIndex Available signature end indexADD PRACHASC(Optional)RNC
AvailablesignatureStartIndexAvailable signature start index ADD PRACHASC(Optional)RNC
AvailableSubchannelCtrlWord Available subchannel control word ADD PRACHASC(Optional)RNC
AvailCap Capability of CN Node ADD CNNODE(Mandatory)RNC
AVOL Alarm VOL. SET ALMPORT(Optional) RNC
BACK8KCLKSW1 Output Switch of backplane 8K OutClock 1 SET CLK(Optional) RNC
BACK8KCLKSW2 Output Switch of backplane 8K OutClock 2 SET CLK(Optional) RNC
BackgroundNoise Background noise ADD CELLCAC(Optional) RNC
BACKUPPATH Path of Backup File BKP DB(Optional) RNC
BAKIP Backup port IP address STR IPCHK(Optional) RNC
BAKMASK Backup port mask STR IPCHK(Optional) RNC
BAMIP BAM External Network Virtual IP ADD EMSIP(Optional) RNC
BAMMASK BAM External Network MaskADD EMSIP(Optional) RNC
BandInd Band indicator
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Mandatory)
RNC
BandWidthForFACH Bandwidth of Fach SET FACHBANDWIDTH(Optional) RNC
BCC BS color code ADD GSMCELL(Mandatory) RNC
BcchArfcn Inter-RAT cell frequency number ADD GSMCELL(Mandatory) RNC
BcchHspdschPower BCCH HS-PDSCH power ADD CELLEFACH(Optional) RNC
BcchHsscchPower BCCH HS-SCCH power ADD CELLEFACH(Optional) RNC
BCHPower BCH transmit power ADD BCH(Optional) RNC
BearType Bear Type SET USERGBR(Mandatory)RNC
BEARTYPE DSP bear type ADD N7DPC(Mandatory) RNC
BeatDectThred HeatBeat Lost Times Threshold ADD RNCPOOL(Optional) RNC
BeatRecvrThred HeatBeat Recover Times Threshold ADD RNCPOOL(Optional) RNC
BeatSendingDis HeatBeat Sending Time Interval ADD RNCPOOL(Optional) RNC
BeBitRateThd BE service handover rate threshold SET HOCOMM(Optional) RNC
BeCpc2EFachStateTransTimer BE CPC to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeCpc2FStateTransTimer BE CPC to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeD2EFachStateTransTimerBE DCH to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeD2FStateTransTimer BE DCH to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeDlAct1 First Action For BE Downlink QOS SET QOSACT(Optional) RNC
BeDlAct2 Second Action For BE Downlink QOS SET QOSACT(Optional) RNC
BeDlAct3 Third Action For BE Downlink QOS SET QOSACT(Optional) RNC
BeE2FStateTransTimer BE E-DCH To FACH State Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeEFach2CpcTvmThd BE E_FACH2CPC 4A Threshold SET UESTATETRANS(Optional) RNC
BeEFach2CpcTvmTimeToTrig BE E_FACH2CPC 4A Time SET UESTATETRANS(Optional) RNC
BeEFach2DTvmThd BE E_FACH2D 4A Threshold SET UESTATETRANS(Optional) RNC
BeEFach2DTvmTimeToTrigBE E_FACH2D 4A Time SET UESTATETRANS(Optional) RNC
BeEFach2HTvmThd BE E_FACH2HS-DSCH 4A Threshold SET UESTATETRANS(Optional) RNC
BeEFach2HTvmTimeToTrigBE E_FACH2HS-DSCH 4A Time SET UESTATETRANS(Optional) RNC
BeF2CpcETvmThd BE F2CPC_E-DCH 4A Threshold SET UESTATETRANS(Optional) RNC
BeF2CpcETvmTimeToTrig BE FACH2CPC_E-DCH 4A Time SET UESTATETRANS(Optional) RNC
BeF2CpcHTvmThd BE F2CPC_HS-DSCH 4A Threshold SET UESTATETRANS(Optional) RNC
BeF2CpcHTvmTimeToTrig BE F2CPC_HS-DSCH 4A Time SET UESTATETRANS(Optional) RNC
BeF2DTvmThd BE F/R2D 4A Threshold SET UESTATETRANS(Optional) RNC
BeF2DTvmTimeToTrig BE F/R2D 4A Time SET UESTATETRANS(Optional) RNC
BeF2ETvmThd BE F2E-DCH 4A Threshold SET UESTATETRANS(Optional) RNC
BeF2ETvmTimeToTrig BE F2E-DCH 4A Time SET UESTATETRANS(Optional) RNC
BeF2HTvmThd BE F2HS-DSCH 4A Threshold SET UESTATETRANS(Optional) RNC
BeF2HTvmTimeToTrig BE F2HS-DSCH 4A Time SET UESTATETRANS(Optional) RNC
BeF2PStateTransTimer BE FACH to PCH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeH2EFachStateTransTimerBE HSPA to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeH2FStateTransTimer BE HS-DSCH to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
BeH2FTvmPTAT BE HS-DSCH2F 4B Pending Time SET UESTATETRANS(Optional) RNC
BeH2FTvmThd BE HS-DSCH2F 4B Threshold SET UESTATETRANS(Optional) RNC
BeH2FTvmTimeToTrig BE HS-DSCH2F 4B Time SET UESTATETRANS(Optional) RNC
BeHsupa2msTtiRateThs Rate threshold of BE on 2ms TTI of HSUPA SET FRC(Optional) RNC
BEInterIurRateUpTimer Timer For BE Inter Iur Rate SET QOSACT(Optional) RNC
BePwrMargin BE Event F Reporting Power Margin
ADD
CELLDCCC(Optional)
SET DCCC(Optional) RNC
BEQosPerform QOS Switch For BE Traffic SET QOSACT(Optional) RNC
BetaC Reference BetaC ADD TYPRABBASIC(Mandatory) RNC
BetaD Reference BetaD ADD TYPRABBASIC(Mandatory) RNC
BeUlAct1 First Action For BE Uplink QOS SET QOSACT(Optional) RNC
BeUlAct2 Second Action For BE Uplink QOS SET QOSACT(Optional) RNC
BeUlAct3 Third Action For BE Uplink QOS SET QOSACT(Optional) RNC
BeUlEvTrigInd Indicator For BE Uplink QOS Event SET QOSACT(Optional) RNC
BeUlQos5AMcSwitch Measurement Of 5A Switch SET QOSACT(Optional) RNC
BeUlQos6A1McSwitch Measurement Of 6A1 SwitchSET QOSACT(Optional) RNC
BeUlQos6DMcSwitch Measurement Of 6D Switch SET QOSACT(Optional) RNC
BeUlRateAdjTimerLen Wait Timer For BE Uplink Rate SET QOSACT(Optional) RNC
BFDDETECTCOUNT detect multiplier of BFD packet STR IPCHK(Optional) RNC
BGGBR Background MAC-c flow GBR ADD CELLEFACH(Optional) RNC
BGMBR Background MAC-c flow MBR ADD CELLEFACH(Optional) RNC
BgnAbnormalThd Background noise abnormal threshold ADD CELLCAC(Optional) RNC
BGNAdjustTimeLen Background noise update continuance time ADD CELLCAC(Optional) RNC
BgnEndTime Background noise update end time ADD CELLCAC(Mandatory)RNC
BGNEqUserNumThd Equivalent user number threshold for background noise ADD CELLCAC(Optional) RNC
BgnStartTime Background noise update start time ADD CELLCAC(Mandatory)RNC
BGNSwitch Auto-adaptive background noise update switch ADD CELLCAC(Optional) RNC
BgnUpdateThd Background noise update trigger threshold ADD CELLCAC(Optional) RNC
BLERQuality Target value of service DCH_BLER ADD TYPRABOLPC(Mandatory) RNC
BlindHoFlag Blind handover flag
ADD
GSMNCELL(Optional)
ADD
INTERFREQNCELL(Optio
nal)
RNC
BlindHOIntrafreqMRAmount Intrafrequency measurement report amount of blind handover SET INTRAFREQHO(Optional) RNC
BlindHOIntrafreqMRIntervalIntrafrequency measurement report interval of blind HO SET INTRAFREQHO(Optional) RNC
BlindHOPrio Blind handover Priority ADD GSMNCELL(Mandatory) RNC
BlindHOQualityCondition Blind handover condition ADD INTERFREQNCELL(Optional) RNC
BlindHORSCP1FThreshold 1F event blind handover trigger condition
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
BLOREQTMR Blocking request timer SET AAL2TMR(Optional) RNC
boxflg Report Flag SET BOXRPT(Mandatory) RNC
BRDCLASS Board class ADD BRD(Mandatory) RNC
BRDTYPE Board type ADD BRD(Optional) RNC
BRDTYPE Board type. SET ETHPORT(Mandatory) RNC
BRDTYPE Board type ADD PPPLNK(Mandatory) RNC
BRDTYPE Board type ADD MPLNK(Mandatory) RNC
BSICVerify BSIC verify switch
ADD
CELLINTERRATHONCO
V(Optional)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHONCOV(Opt
ional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
BT Board type SET E1T1LOP(Mandatory) RNC
BT Board type LOP E1T1(Mandatory) RNC
BT Board type STR E1T1TST(Mandatory) RNC
BT Board type LOD PATCH(Mandatory) RNC
BT Board type SET CLK(Mandatory) RNC
BT Board type SET E1T1(Mandatory) RNC
BT Board type SET CPUTHD(Mandatory) RNC
BT Board Type ADD IMAGRP(Mandatory) RNC
BT Board type SET OPT(Mandatory) RNC
BT Board type ADD ATMLOGICPORT(Optional) RNC
BWADJ Auto adjust bandwidth switchADD IPLOGICPORT(Optional) RNC
BWDCONGBW Backward congestion threshold
ADD PPPLNK(Optional)
ADD IMAGRP(Optional)
ADD FRALNK(Optional)
ADD UNILNK(Optional)
ADD MPGRP(Optional)
RNC
BWDCONGBW Backward congestion threshold ADD IPLOGICPORT(Optional) RNC
BWDCONGBW Backward congestion threshold ADD ATMLOGICPORT(Optional) RNC
BWDCONGBW Backward congestion threshold ADD AAL2PATH(Optional)RNC
BWDCONGBW Backward congestion threshold ADD IPPATH(Optional) RNC
BWDCONGBW Backward congestion threshold ADD RSCGRP(Optional) RNC
BWDCONGCLRBW Backward congestion clear threshold
ADD PPPLNK(Optional)
ADD IMAGRP(Optional)
ADD FRALNK(Optional)
ADD UNILNK(Optional)
ADD MPGRP(Optional)
RNC
BWDCONGCLRBW Backward congestion clear threshold ADD IPLOGICPORT(Optional) RNC
BWDCONGCLRBW Backward congestion clear threshold ADD ATMLOGICPORT(Optional) RNC
BWDCONGCLRBW Backward congestion clear threshold ADD AAL2PATH(Optional)RNC
BWDCONGCLRBW Backward congestion clear threshold ADD IPPATH(Optional) RNC
BWDCONGCLRBW Backward congestion clear threshold ADD RSCGRP(Optional) RNC
BWDHORSVBW Backward handover reserved bandwidth
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD UNILNK(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
RNC
BWDHORSVBW Backward handover reserved bandwidth ADD IPLOGICPORT(Optional) RNC
BWDHORSVBW Backward handover reserved bandwidth ADD ATMLOGICPORT(Optional) RNC
BWDHORSVBW Backward handover reserved bandwidth ADD AAL2PATH(Optional)RNC
BWDHORSVBW Backward handover reserved bandwidth ADD IPPATH(Optional) RNC
BWDHORSVBW Backward handover reserved bandwidth ADD RSCGRP(Optional) RNC
BWMAXRATIO Max bandwidth estimate ratioADD IPLOGICPORT(Optional) RNC
BWMODE Bandwidth Mode ADD RSCGRP(Mandatory) RNC
BWRTPTH Load Control algorithm BandWidth THD ADD IPLOGICPORT(Optional) RNC
CacSwitch CAC algorithm switch SET CACALGOSWITCH(Optional) RNC
CallShockCtrlSwitch Call Shock Control Switch SET CALLSHOCKCTRL(Optional) RNC
CallShockJudgePeriod Call Shock Judge Period time length SET CALLSHOCKCTRL(Optional) RNC
CarrierTypePriorInd Indicator of Carrier Type Priority SET USERPRIORITY(Optional) RNC
CARRYF Bearing subrack No. ADD AAL2PATH(Mandatory) RNC
CARRYFLAG Carry Flag ADD IPPATH(Optional) RNC
CARRYFRAATMLNKN Bearing FRAATM link No.
ADD IPOAPVC(Optional)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
ATMLOGICPORT(Option
al)
RNC
CARRYIMAGRPN Bearing IMA group No.
ADD IPOAPVC(Optional)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
ATMLOGICPORT(Option
al)
RNC
CARRYLNKT Bearing link type
ADD NCP(Mandatory)
ADD CCP(Mandatory) RNC
CARRYNCOPTN Bearing NCOPT port No.
ADD
IPOAPVC(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
RNC
CARRYPN Optical port No. ADD ATMLOGICPORT(Optional) RNC
CARRYSN Bearing slot No.
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
RNC
CARRYSRN Bearing subrack No. ADD SAALLNK(Mandatory) RNC
CARRYT The bearing type of the logic port ADD IPLOGICPORT(Mandatory) RNC
CARRYT The bearing type of the logical port ADD ATMLOGICPORT(Mandatory) RNC
CARRYT Bearing type
ADD
AAL2PATH(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
IPOAPVC(Mandatory)
RNC
CARRYUNILNKN Bearing UNI link No.
ADD IPOAPVC(Optional)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
ATMLOGICPORT(Option
al)
RNC
CARRYVCI Bearing VCI
ADD
SAALLNK(Mandatory)
ADD IPOAPVC(Optional)
RNC
CARRYVPI Bearing VPI
ADD
SAALLNK(Mandatory)
ADD IPOAPVC(Optional)
RNC
CARRYVPN Bearing ATMLGCPORT port No.
ADD
IPOAPVC(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
RNC
CBCIPADDR CBS CBC IP address ADD CBSADDR(Mandatory) RNC
CBCMASK Subnet mask ADD CBSADDR(Mandatory) RNC
CBS Consent burst size ADD IPLOGICPORT(Optional) RNC
CBSOpIndex CBS Operator Index ADD QUICKCELLSETUP(Mandatory) RNC
CBSSAC CBS SAC
ADD
CELLCBSSAC(Mandatory
)
ADD
QUICKCELLSETUP(Man
datory)
RNC
CBSwitch CB Switch SET RNCCBPARA(Optional) RNC
CCCHGBR CCCH MAC-c flow GBR ADD CELLEFACH(Optional) RNC
CCCHMBR CCCH MAC-c flow MBR ADD CELLEFACH(Optional) RNC
CCHPRIPATH Common channel primary path ADD TRMMAP(Optional) RNC
CCHPRITH Common channel pri path load threshold ADD LOADEQ(Optional) RNC
CCHSECPATH Common channel secondary path ADD TRMMAP(Optional) RNC
CCHSECWHT Common channel pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
CCMINTERVAL CCM Send Prid ADD ETHMA(Optional) RNC
CCMODE Activation mode ACT VCLCC(Optional) RNC
CCTMR Timer_CC ADD SAALLNK(Optional) RNC
CDVT Cell delay variation toleranceADD ATMTRF(Optional) RNC
CellAmrRrcNum AMR_RRC Number per Second for Cell SET CALLSHOCKCTRL(Optional) RNC
CellAverageHeight Cell Average Altitude ADD SMLCCELL(Optional)RNC
CellAverageHeightImp Cell Average Altitude ADD SMLCCELL(Optional)RNC
CellCapacityAutoHandleSwitch Cell Capability Auto Handle Switch ADD CELLALGOSWITCH(Optional) RNC
CellCapContainerFdd Cell capability container ADD NRNCCELL(Mandatory) RNC
CellCenterAltitude Cell Center Altitude ADD SMLCCELL(Optional)RNC
CellCenterAltitudeImp Cell Center Altitude ADD SMLCCELL(Optional)RNC
CellCenterLatitude Cell Center Latitude ADD SMLCCELL(Optional)RNC
CellCenterLatitudeSec Cell Center Latitude ADD SMLCCELL(Optional)RNC
CellCenterLongitude Cell Center Longitude ADD SMLCCELL(Optional)RNC
CellCenterLongitudeSec Cell Center Longitude ADD SMLCCELL(Optional)RNC
CellChoice Target cell choice HO CELL(Mandatory) RNC
CellEnvironment Cell Environment Case ADD SMLCCELL(Optional)RNC
CellEnvType Cell environment type ADD CELLCAC(Optional) RNC
CellHeightStd Cell Altitude Standard Deviation ADD SMLCCELL(Optional)RNC
CellHeightStdImp Cell Altitude Standard Deviation ADD SMLCCELL(Optional)RNC
CellHighPriRrcNum HiPri_RRC Number per Second for Cell SET CALLSHOCKCTRL(Optional) RNC
CellHostType Cell Host Type ADD NRNCCELL(Optional)RNC
CellId Cell ID
ADD
CELLSETUP(Mandatory)
ADD GPS(Mandatory)
ADD
CELLCMCF(Mandatory)
ADD
CELLINTRAFREQHO(Ma
ndatory)
ADD
CELLQOSHO(Mandatory)
ADD
GSMNCELL(Mandatory)
ADD
CELLINTERFREQHOCO
V(Mandatory)
ADD
CELLINTERFREQHONC
OV(Mandatory)
ADD
CELLHOCOMM(Mandator
y)
ADD
CELLINTERRATHOCOV
(Mandatory)
ADD
CELLINTERRATHONCO
V(Mandatory)
ADD
INTERFREQNCELL(Man
datory)
ADD
INTRAFREQNCELL(Man
datory)
ADD
RNC
CellIDChgPeriod Cell ID Changing Period time length SET CIDCHG(Optional) RNC
CellIDChgSwitch Cell ID Changing Switch SET CIDCHG(Optional) RNC
CellidRttActivateFlag CELLID+RTT Method Active Flag ADD SMLCCELL(Optional)RNC
CELLIDRTTMethodType CELLID+RTT Method TypeSET SMLC(Optional) RNC
CellLdrSfResThd Cell LDR SF reserved threshold ADD CELLLDR(Optional) RNC
CellLocCfgType Cell Location Setting Type ADD SMLCCELL(Mandatory) RNC
CellName Cell name
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
NRNCCELL(Mandatory)
RNC
CellOverrunThd Cell overload threshold ADD CELLLDB(Optional) RNC
CellReSelectCounter Cell Reselection Counter Threshold SET UESTATETRANS(Optional) RNC
CellReSelectTimer Cell Reselection Timer SET UESTATETRANSTIMER(Optional) RNC
CellReservationExtension Cell reservation extension ADD CELLACCESSSTRICT(Optional) RNC
CellReservedForOperatorUseCell reserved for operator useADD CELLACCESSSTRICT(Optional) RNC
CellsForbidden1A Affect 1A threshold flag ADD INTRAFREQNCELL(Optional) RNC
CellsForbidden1B Affect 1B threshold flag ADD INTRAFREQNCELL(Optional) RNC
CellTotalRrcNumThd Cell Call Shock Trigger Threshold SET CALLSHOCKCTRL(Optional) RNC
CellUnderrunThd Cell underload threshold ADD CELLLDB(Optional) RNC
CfgRacInd RAC Configuration Indication
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
NRNCCELL(Mandatory)
ADD
GSMCELL(Mandatory)
RNC
CfgSwitch Channel configuration strategy switch SET CORRMALGOSWITCH(Optional) RNC
ChannelRetryHoTimerLen Channel Retry Ho Timer Length SET COIFTIMER(Optional) RNC
ChannelRetryTimerLen Channel Retry Timer Length SET COIFTIMER(Optional) RNC
ChCodingType Channel code type ADD FACH(Optional) RNC
CHECKCOUNT Ping Check Timeout Counts ADD IPPATH(Optional) RNC
ChIdx Channel Index SET MBMSPERF(Mandatory) RNC
CHKN Check Index
ADD
IPPATHBIND(Mandatory)
STR IPCHK(Optional)
RNC
CHKSUMRX Calculate checksum when receive message ADD SCTPLNK(Optional) RNC
CHKSUMTX Calculate checksum when send message ADD SCTPLNK(Optional) RNC
CHKSUMTYPE Checksum arithmetic ADD SCTPLNK(Optional) RNC
CHKTYPE Check type STR IPCHK(Mandatory) RNC
ChoiceRprtUnitForDlBasicMeas Time unit for DL basic meas rprt cycle
SET LDM(Optional)
SET SATLDM(Optional) RNC
ChoiceRprtUnitForDlOlcMeas Time unit for DL OLC meas rprt cycle
SET LDM(Optional)
SET SATLDM(Optional) RNC
ChoiceRprtUnitForHsdpaPwrMeas Time unit of HSDPA need pwr meas cycle
SET LDM(Optional)
SET SATLDM(Optional) RNC
ChoiceRprtUnitForHsdpaRateMeas Time unit of HSDPA bit rate meas cycle
SET LDM(Optional)
SET SATLDM(Optional) RNC
ChoiceRprtUnitForHsupaRateMeas Time unit of HSUPA bit rate meas cycle SET LDM(Optional) RNC
ChoiceRprtUnitForUlBasicMeas Time unit for UL basic meas rprt cycle
SET LDM(Optional)
SET SATLDM(Optional)
RNC
ChoiceRprtUnitForUlOlcMeas Time unit for UL OLC meas rprt cycle
SET LDM(Optional)
SET SATLDM(Optional) RNC
ChoiceRptUnitForAmrE AMR Reporting Period Unit For Event E
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
ChoiceRptUnitForBeE BE Reporting Period Unit For Event E
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
ChoiceRptUnitForBeF BE Reporting Period Unit For Event F
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
ChoiceRptUnitForVpE VP Reporting Period Unit For Event E
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
ChSwitch Channel Switch SET MBMSPERF(Mandatory) RNC
CID GSM cell ID ADD GSMCELL(Mandatory) RNC
CIO Cell oriented Cell Individual Offset
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional) RNC
CIO Cell Individual Offset ADD GSMCELL(Optional) RNC
CIOOffset Neighboring cell oriented CIOADD GSMNCELL(Optional)RNC
CIOOffset Neighboring cell oriented CIO
ADD
INTERFREQNCELL(Optio
nal)
ADD
INTRAFREQNCELL(Opti
onal)
RNC
CIR Bandwidth ADD IPLOGICPORT(Mandatory) RNC
CLKTYPE Clock board type SET CLKTYPE(Mandatory) RNC
CLTAModeInd Closed loop time adjust mode indication ADD CELLSETUP(Optional) RNC
CmCap Compression mode capabilityADD NODEBLMTPARA(Optional) RNC
CmcfCellType CM cell type
ADD
CELLCMCF(Optional)
SET CMCF(Optional)
RNC
CmcfSwitch CMCF algorithm switch SET CORRMALGOSWITCH(Optional) RNC
CmchRsrcRspTmr CMCH RSRC response timerSET STATETIMER(Optional) RNC
CmpSwitch Compatibility switch SET CORRMALGOSWITCH(Optional) RNC
CNDomainId CN domain ID
ADD
CNDOMAIN(Mandatory)
ADD
CELLRLPWR(Mandatory)
ADD
TYPRABBASIC(Mandator
y)
ADD
CNNODE(Mandatory)
RST
IURESOURCE(Mandatory)
RST IU(Mandatory)
RNC
CNId CN node ID
ADD
CNNODE(Mandatory)
SET
IUTIMERANDNUM(Man
datory)
ADD
NRIGLBCNIDMAP(Mand
atory)
ADD
IMSIIDNNSCNIDMAP(M
andatory)
RST IU(Mandatory)
RST
IURESOURCE(Mandatory)
RNC
CNLoadStatus Status of CN Node ADD CNNODE(Mandatory)RNC
CNMNGMODE Resource Management ModeADD ADJMAP(Mandatory) RNC
CNOPERATORINDEX Cn Operator Index ACT LICENSE(Optional) RNC
CnOperatorName Cn Operator Name ADD CNOPERATOR(Mandatory) RNC
CnOpGrpIndex Cn Operator Group Index ADD CNOPERGROUP(Mandatory) RNC
CnOpGrpIndex CN Operator Group Index
ADD
NRNCCELL(Mandatory)
ADD
GSMCELL(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
CELLSETUP(Mandatory)
RNC
CnOpGrpName Cn Operator Group Name ADD CNOPERGROUP(Mandatory) RNC
CnOpIndex Cn Operator Index ADD NRNCURA(Mandatory) RNC
CnOpIndex Cn Operator Index
ADD
CNOPERATOR(Mandator
y)
ADD
RSCGRP(Mandatory)
ADD
ADJMAP(Mandatory)
ADD
IPLOGICPORT(Mandatory
)
ADD
ATMLOGICPORT(Option
al)
ADD CZ(Mandatory)
RST IU(Mandatory)
RST
IURESOURCE(Mandatory)
ADD
CELLCBSSAC(Mandatory
)
SET
IUTIMERANDNUM(Man
datory)
ADD
CNNODE(Mandatory)
ADD
NRIGLBCNIDMAP(Mand
atory)
ADD
IMSIIDNNSCNIDMAP(M
andatory)
ADD
RNCCBCPUID(Mandatory
)
RNC
CnOpIndex1 Operator 1 Index ADD CNOPERGROUP(Mandatory) RNC
CnOpIndex2 Operator 2 Index ADD CNOPERGROUP(Mandatory) RNC
CnOpIndex3 Operator 3 Index ADD CNOPERGROUP(Mandatory) RNC
CnOpIndex4 Operator 4 Index ADD CNOPERGROUP(Mandatory) RNC
CnOpIndexComm Common Operator Index ADD CNOPERGROUP(Optional) RNC
CnOpNum Operator Number ADD CNOPERGROUP(Mandatory) RNC
CNProtclVer CN protocol version ADD CNNODE(Mandatory)RNC
CodeAdjForHsdpaSwitch Code Adjust Switch for HSDPA ADD CELLHSDPA(Optional) RNC
CodeAdjForHsdpaUserNumThd User Number for Code Adjust for HSDPA ADD CELLHSDPA(Optional) RNC
CodeBalancingDrdCodeRateThd Code occupied rate threshold for code balance drd
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
CodeBalancingDrdMinSFThdMinimum SF threshold for code balance drd
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
CodeBalancingDrdSwitch Code balance drd switch
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
CodeCongSelInterFreqHoIndCode congestion select inter-freq indication ADD CELLLDR(Optional) RNC
CodeScheme Code Scheme SET RNCCBPARA(Optional) RNC
CoexistMeasThdChoice InterFreq and InterRat coexist measure threshold choice
ADD
CELLHOCOMM(Optional)
SET HOCOMM(Optional)
RNC
CombNCellPercent Combine Neighbour Cell Percent SET RNCMBMSPARA(Optional) RNC
CombPwrMargin Comb Event F Reporting Power Margin
ADD
CELLDCCC(Optional)
SET DCCC(Optional) RNC
CommPlmnUsingType Comm Plmn Using Type SET OPERATORSHARINGMODE(Optional) RNC
COMTMR1 Timer T1 ADD SAALLNK(Optional) RNC
COMTMR2 Timer T2 ADD SAALLNK(Optional) RNC
COMTMR3 Timer T3 ADD SAALLNK(Optional) RNC
CONGCLRTHD0 Recover threshold of queue 0ADD PORTFLOWCTRLPARA(Optional) RNC
CONGCLRTHD1 Recover threshold of queue 1ADD PORTFLOWCTRLPARA(Optional) RNC
CONGCLRTHD2 Recover threshold of queue 2ADD PORTFLOWCTRLPARA(Optional) RNC
CONGCLRTHD3 Recover threshold of queue 3ADD PORTFLOWCTRLPARA(Optional) RNC
CONGCLRTHD4 Recover threshold of queue 4ADD PORTFLOWCTRLPARA(Optional) RNC
CONGCLRTHD5 Recover threshold of queue 5ADD PORTFLOWCTRLPARA(Optional) RNC
CONGTHD0 Congestion threshold of queue 0 ADD PORTFLOWCTRLPARA(Optional) RNC
CONGTHD1 Congestion threshold of queue 1 ADD PORTFLOWCTRLPARA(Optional) RNC
CONGTHD2 Congestion threshold of queue 2 ADD PORTFLOWCTRLPARA(Optional) RNC
CONGTHD3 Congestion threshold of queue 3 ADD PORTFLOWCTRLPARA(Optional) RNC
CONGTHD4 Congestion threshold of queue 4 ADD PORTFLOWCTRLPARA(Optional) RNC
CONGTHD5 Congestion threshold of queue 5 ADD PORTFLOWCTRLPARA(Optional) RNC
ConnCellBarred Cell barred indicator for SIB4ADD CELLACCESSSTRICT(Mandatory) RNC
ConnectFailRrcRedirSwitch RRC redirect switch SET DRD(Optional) RNC
ConnIntraFreqReselection Intra-freq cell reselection ind for SIB4 ADD CELLACCESSSTRICT(Optional) RNC
CONNPWR Is connecting power monitor ADD SUBRACK(Optional) RNC
ConnQhyst1s Hysteresis 1 for connect modeADD CELLSELRESEL(Optional) RNC
ConnQhyst2s Hysteresis 2 for connect modeADD CELLSELRESEL(Optional) RNC
ConnQoffset1sn ConnQoffset1sn
ADD
INTERFREQNCELL(Optio
nal)
ADD
INTRAFREQNCELL(Opti
onal)
RNC
ConnQoffset2sn ConnQoffset2sn
ADD
INTERFREQNCELL(Optio
nal)
ADD
INTRAFREQNCELL(Opti
onal)
RNC
ConnSintersearch Inter-freq cell reselection threshold for connect mode ADD CELLSELRESEL(Optional) RNC
ConnSintrasearch Intra-freq cell reselection threshold for connect mode ADD CELLSELRESEL(Optional) RNC
ConnTbarred Time barred for SIB4 ADD CELLACCESSSTRICT(Optional) RNC
Constantvalue Constant value for calculating initial TX power ADD PRACHBASIC(Optional) RNC
CONTEXTTYPE Context Type RST IUR(Mandatory) RNC
CONTPING Continue ping or not PING IP(Optional) RNC
ConverDlMBR Downlink maximum bit rate of Conversation SET USERMBR(Optional) RNC
ConverUlMBR Uplink maximum bit rate of Conversation SET USERMBR(Optional) RNC
CONVGBR Conversational MAC-c flow GBR ADD CELLEFACH(Optional) RNC
CONVMBR Conversational MAC-c flow MBR ADD CELLEFACH(Optional) RNC
CopperMaxMode Max Mode Of Wideband AMRC For Copper Users
ADD
CELLAMRCWB(Optional)
SET AMRCWB(Optional)
RNC
CopperMaxMode Max Mode Of Narrowband AMRC For Copper Users
ADD
CELLAMRC(Optional)
SET AMRC(Optional)
RNC
COUNT Send PKT Count PING MAC(Optional) RNC
CountCThreshold Count-C threshold SET CNTCHK(Mandatory) RNC
CounterCheckSwitch Counter check switch SET CNTCHK(Optional) RNC
CP1SupInd CP1 support indicator
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
RNC
CqiDtxTimer CQI Activity Timer SET DTXDRXPARA(Optional) RNC
CQIFbCkinInDTXDRXmodeCQI Feedback Cycke in DTX-DRX mode SET DTXDRXPARA(Optional) RNC
CRMaxNum Max number of cell reselection ADD CELLHCS(Optional) RNC
CROSSIPFLAG Cross IP address available flag ADD SCTPLNK(Optional) RNC
CSCONVDL R99 CS conversational service downlink factor ADD TRMFACTOR(Optional) RNC
CSCONVPRIPATH R99 CS conversational primary path ADD TRMMAP(Optional) RNC
CSCONVPRITH R99 CS conversational pri path load threshold ADD LOADEQ(Optional) RNC
CSCONVSECPATH R99 CS conversational secondary path ADD TRMMAP(Optional) RNC
CSCONVSECWHT R99 CS conversational pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
CSCONVUL R99 CS conversational service uplink factor ADD TRMFACTOR(Optional) RNC
CsErlang Max User Number of CS ACT LICENSE(Optional) RNC
CSHOOut2GloadThd CS domain Reloc GSM load THD
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
CsInfoUpdFlag CS Information Update Switch SET OPERATORCFGPARA(Optional) RNC
CsInfoUpdTmr CS Information Update Protection Timer SET OPERATORCFGPARA(Mandatory) RNC
CsNriCfgMode Feature Supporting Mode of CS Domain SET OPERATORCFGPARA(Optional) RNC
CSNRILength Length of CS NRI in bits SET OPERATORCFGPARA(Mandatory) RNC
CsRestriction Restriction for CS
SET
DSACAUTOALGO(Mand
atory)
ADD
CELLDSACMANUALPA
RA(Mandatory) RNC
CSServiceHOSwitch Inter-RAT CS handover switch ADD CELLHOCOMM(Optional) RNC
CSSTRMDL R99 CS streaming service downlink factor ADD TRMFACTOR(Optional) RNC
CSSTRMPRIPATH R99 CS streaming primary path ADD TRMMAP(Optional) RNC
CSSTRMPRITH R99 CS streaming pri path load threshold ADD LOADEQ(Optional) RNC
CSSTRMSECPATH R99 CS streaming secondary path ADD TRMMAP(Optional) RNC
CSSTRMSECWHT R99 CS streaming pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
CSSTRMUL R99 CS streaming service uplink factor ADD TRMFACTOR(Optional) RNC
CsSwitch CS algorithm switch SET CORRMALGOSWITCH(Optional) RNC
CSVoiceChlType CS voice channel type SET FRCCHLTYPEPARA(Optional) RNC
CSVoiceHspaDlRelDelay CS Voice Hspa Dl Relative Delay SET FRC(Optional) RNC
CSVoiceHspaUlRelDelay CS Voice Hspa Ul Relative Delay SET FRC(Optional) RNC
CSVoiceHsupaTti HSUPA TTI type of CS voice traffic SET FRC(Optional) RNC
CSVoiceOverHspaSuppInd CS Voice Over Hspa Support Indication ADD NRNC(Optional) RNC
CTFC Calculated transport format combination
ADD
SCCPCHTFC(Mandatory)
ADD
PRACHTFC(Mandatory) RNC
CTFCSize CTFC length of TFCS
ADD
SCCPCHBASIC(Optional)
ADD
PRACHBASIC(Optional) RNC
CtrlPlnSharingOutOffset Control plane sharing out offset SET CTRLPLNSHAREPARA(Optional) RNC
CtrlPlnSharingOutThd Control plane sharing out threshold SET CTRLPLNSHAREPARA(Optional) RNC
CTRLSLOT Slot No. ADD RSCGRP(Mandatory) RNC
CTRLSW CM control enable switch SET CMCTRLSW(Mandatory) RNC
CXT Cross type ADD VPCLCX(Mandatory) RNC
CZ Classified Zone ID ADD CZ(Mandatory) RNC
D2F2PTvmThd BE D2F/R Or F/R2P 4B Threshold SET UESTATETRANS(Optional) RNC
D2FTvmPTAT BE D2F/R 4B Pending Time SET UESTATETRANS(Optional) RNC
D2FTvmTimeToTrig BE D2F/R 4B Time SET UESTATETRANS(Optional) RNC
Dccc1APenaltyTime 1A Rate Down Penalty Time Length SET DCCC(Optional) RNC
DcccShoPenaltyTime Period of penalty timer for SHO failure after down rate SET INTRAFREQHO(Optional) RNC
DcccStg DCCC Strategy SET DCCC(Optional) RNC
DcccUpPenaltyLen DCCC Rate Up Fail Penalty Time Length SET DCCC(Optional) RNC
DchThrouMeasPeriod DCH Throu Meas Period SET DCCC(Optional) RNC
DchThrouPendingTime4B Period Amount after trigger 4B on DCH ADD TYPRABDCCCMC(Optional) RNC
DchThrouTimetoTrigger4B Period Amount to trigger 4B on DCH ADD TYPRABDCCCMC(Optional) RNC
DEBUGSUBNET Debugging Subnet No. SET SUBNET(Optional) RNC
DefaultCnOp Default CnOperator SET OPERATORSHARINGMODE(Optional) RNC
DefaultConstantValue Constant value configured by default SET FRC(Optional) RNC
DefPcpichEcNo Default PCPICH Ec/No ADD CELLCAC(Optional) RNC
Delay Delay Time Length SET POOLPRIMHOSTPOLICY(Mandatory) RNC
DELAY Max diff delay ADD IMAGRP(Optional) RNC
DelayClass Delay Class
ADD
TYPRABOLPC(Mandatory
)
ADD
TYPRABRLC(Mandatory) RNC
DeltaCodeOccupiedRate Delta code occupied rate SET DRD(Optional) RNC
DeltaQrxlevmin Delta Min Rx level
ADD
CELLSELRESEL(Mandato
ry)
ADD
NRNCCELL(Mandatory)
RNC
DENO Destination entity No.
ADD M3DE(Mandatory)
ADD M3RT(Mandatory)
ADD M3LKS(Mandatory)
RNC
DESTIP Destination IP address PING IP(Mandatory) RNC
DESTIP Destination IP address TRC IPADDR(Mandatory) RNC
DESTMEPID RMEP ID PING MAC(Mandatory) RNC
DESTMEPID RMEP ID TRC MAC(Mandatory) RNC
DGPSPERIOD DGPS data report period ADD GPS(Optional) RNC
Direction Direction ADD TYPRABDCCCMC(Mandatory) RNC
DivCtrlField Softer handover combination indication switch SET HOCOMM(Optional) RNC
DlAmrConvAF DL AF of R99 AMR conv service SET ADMCTRL(Optional) RNC
DlAmrTrigTimeE AMR Trigger Time Of Event E
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
DlBackgroundAF DL AF of R99 background service SET ADMCTRL(Optional) RNC
DlBasicCommMeasFilterCoeff DL basic common measure filter coeff
SET LDM(Optional)
SET SATLDM(Optional) RNC
DlBeH2DInitialRate DL rate of HSDPA BE traffic as H2D SET FRC(Optional) RNC
DlBeTraffDecThs DL BE traffic DCH decision threshold
SET
FRCCHLTYPEPARA(Opti
onal)
ADD CELLFRC(Optional)
RNC
DlBeTraffInitBitrate DL BE traffic Initial bit rate SET FRC(Optional) RNC
DlBeTraffThsOnHsdpa DL BE traffic threshold on HSDPA SET FRCCHLTYPEPARA(Optional) RNC
DlBeTrigTimeE BE Trigger Time Of Event E
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
DlBeTrigTimeF BE Trigger Time Of Event F
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
DlCacAvgFilterLen DL CAC smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
DlCCHLoadRsrvCoeff DL common channel load reserved coefficient ADD CELLCAC(Optional) RNC
DlCellTotalThd DL total power threshold ADD CELLCAC(Optional) RNC
DlCmMethod Downlink Compression Method ADD NODEBLMTPARA(Optional) RNC
DLCODENO Reserved DL code No ADD RESERVEOVSF(Mandatory) RNC
DlConvAMRThd DL threshold of Conv AMR service ADD CELLCAC(Optional) RNC
DlConvNonAMRThd DL threshold of Conv non_AMR service ADD CELLCAC(Optional) RNC
DlCSInterRatShouldBeHOUeNum DL CS should be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlCSInterRatShouldNotHOUeNum DL CS should not be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlDcccRateThd Downlink Bit Rate Threshold For DCCC SET DCCC(Optional) RNC
DlFullCvrRate Downlink Full Coverage Bit Rate
ADD
CELLDCCC(Optional)
SET DCCC(Optional)
RNC
DlGBR Downlink GBR for BE service SET USERGBR(Optional) RNC
DlHoCeCodeResvSf DL handover credit and code reserved SF ADD CELLCAC(Optional) RNC
DlHOThd DL handover access thresholdADD CELLCAC(Optional) RNC
DlHSUPARsvdFactor DL HSUPA reserved factor ADD CELLCAC(Optional) RNC
DlInteractAF DL AF of R99 interactive service SET ADMCTRL(Optional) RNC
DlInterFreqHoBWThd DL HO maximum bandwidthADD CELLLDR(Optional) RNC
DlInterFreqHoCellLoadSpaceThd DL HO load space threshold ADD CELLLDR(Optional) RNC
DlLdrAMRRateReductionRabNum DL LDR-AMR rate reduction RAB number ADD CELLLDR(Optional) RNC
DlLdrAvgFilterLen DL LDR smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
DlLdrBERateReductionRabNum DL LDR-BE rate reduction RAB number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrCreditSfResThd DL LDR credit SF reserved threshold
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrEighthAction DL LDR eighth action ADD CELLLDR(Optional) RNC
DlLdrFifthAction DL LDR fifth action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrFirstAction DL LDR first action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrFourthAction DL LDR fourth action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrNinthAction DL LDR ninth action ADD CELLLDR(Optional) RNC
DlLdrPsRTQosRenegRabNum DL LDR un-ctrl RT Qos re-nego RAB num
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrRelThd DL LDR release threshold ADD CELLLDM(Optional) RNC
DlLdrSecondAction DL LDR second action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrSeventhAction DL LDR seventh action ADD CELLLDR(Optional) RNC
DlLdrSixthAction DL LDR sixth action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrTenthAction DL LDR tenth action ADD CELLLDR(Optional) RNC
DlLdrThirdAction DL LDR third action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlLdrTrigThd DL LDR trigger threshold ADD CELLLDM(Optional) RNC
DlLdTrnsHysTime DL State Trans Hysteresis threshold ADD CELLLDM(Optional) RNC
DlMaxNumOfTfc Downlink Maximum Number of TFC ADD NODEBLMTPARA(Optional) RNC
DlMBMSRsvdFactor DL MBMS reserved factor ADD CELLCAC(Optional) RNC
DlMeasFilterCoef DL TCP Measurement Filter Coefficient
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
DlMidRateCalc Downlink Mid Bit Rate Calculate Method SET DCCC(Optional) RNC
DlMidRateThd Downlink Mid Bit Rate Threshold SET DCCC(Mandatory) RNC
DlModeChangeTimerLen DL Mode Change Waiting Timer Length
SET AMRC(Optional)
SET AMRCWB(Optional)
RNC
DlNonAmrConvAF DL AF of R99 non AMR conv service SET ADMCTRL(Optional) RNC
DlOlcAvgFilterLen DL OLC smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
DlOlcFTFRstrctRabNum DL OLC fast TF restrict RAB number ADD CELLOLC(Optional) RNC
DlOlcFTFRstrctTimes DL OLC fast TF restrict times ADD CELLOLC(Optional) RNC
DlOlcMeasFilterCoeff DL overload measure filter coeff
SET LDM(Optional)
SET SATLDM(Optional) RNC
DlOlcRelThd DL OLC release threshold ADD CELLLDM(Optional) RNC
DlOlcTraffRelRabNum DL OLC traff release RAB number ADD CELLOLC(Optional) RNC
DlOlcTrigHyst DL OLC trigger hysteresis
SET LDM(Optional)
SET SATLDM(Optional) RNC
DlOlcTrigThd DL OLC trigger threshold ADD CELLLDM(Optional) RNC
DlOtherThd DL threshold of other services ADD CELLCAC(Optional) RNC
DLOVSFSF Reserved DL code OVSF ADD RESERVEOVSF(Mandatory) RNC
DlPSInterRatShouldBeHOUeNum DL PS should be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlPSInterRatShouldNotHOUeNum DL PS should not be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
DlQosAmrAdjSwitch Switch Of AMR Downlink Rate Adjustment SET QOSACT(Optional) RNC
DlQosAmrInterFreqHoSwitchInterFreq HO Switch For Downlink AMR SET QOSACT(Optional) RNC
DlQosAmrInterRatHoSwitchInterRat HO Switch For Downlink AMR SET QOSACT(Optional) RNC
DLQosMcTimerLen Down Link Qos Measure timer length
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
RNC
DlQosVpInterFreqHoSwitch InterFreq HO Switch For Downlink VP SET QOSACT(Optional) RNC
DlQosWAmrAdjSwitch Switch For WAMR Downlink Rate SET QOSACT(Optional) RNC
DlQosWAmrInterFreqHoSwitch InterFreq HO Switch For WAMR Downlink SET QOSACT(Optional) RNC
DlQosWAmrInterRatHoSwitch InterRat HO Switch For WAMR Downlink SET QOSACT(Optional) RNC
DlR99CongCtrlSwitch DL R99 Congestion Control Switch SET DPUCFGDATA(Optional) RNC
DlRateDnAdjLevel Downlink Rate Decrease Adjust Level SET DCCC(Optional) RNC
DlRateUpAdjLevel Downlink Rate Increase Adjust Level SET DCCC(Optional) RNC
DlRscpQosHyst Down Link RSCP Used-Freq THD Hyst
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
RNC
DlSF Downlink spreading factor ADD CELLRLPWR(Mandatory) RNC
DlSFLimitCMInd Dl SF limit CM ind SET CMCF(Optional) RNC
DlSFTurnPoint DL SF threshold
ADD
CELLCMCF(Optional)
SET CMCF(Optional)
RNC
DlSrbActFactor DL AF of SRB SET ADMCTRL(Optional) RNC
DlStreamAF DL AF of R99 Streaming service SET ADMCTRL(Optional) RNC
DlStrThsOnHsdpa DL streaming traffic threshold on HSDPA SET FRCCHLTYPEPARA(Optional) RNC
DlThdE1 DL E1 Event Relative Threshold
SET AMRC(Optional)
SET AMRCWB(Optional)
RNC
DlThdE2 DL E2 Event Relative Threshold
SET AMRC(Optional)
SET AMRCWB(Optional)
RNC
DlThdF1 DL F1 Event Relative Threshold
SET AMRC(Optional)
SET AMRCWB(Optional)
RNC
DlThdF2 DL F2 Event Relative Threshold
SET AMRC(Optional)
SET AMRCWB(Optional)
RNC
DlTotalEqUserNum DL total equivalent user number ADD CELLCAC(Optional) RNC
DlVpTrigTimeE VP Trigger Time Of Event E
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
DLYGB Expected diff delay guard-band ADD IMAGRP(Optional) RNC
DomainType Blocked domain type ADD RNCALLCELLBLK(Mandatory) RNC
DOOR_ENGINE_MASK Enable Door Status Alarm Reporting ADD EMU(Optional) RNC
DPC DSP code ADD N7DPC(Mandatory) RNC
DpcchBurst1 DPCCH Transmission Burst 1SET DTXDRXPARA(Optional) RNC
DpcchBurst2 DPCCH Transmission Burst 2SET DTXDRXPARA(Optional) RNC
DpcchSlotFmtForHspa prefered DPCCH slot format for HSPA SET FRC(Optional) RNC
DPCDNF DSP code ADD N7DPC(Mandatory) RNC
DpchDivModforMIMO DPCH diversity mode for MIMO user
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional) RNC
DpchPrioTxDiversityMode DPCH priority Tx diversity mode
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
RNC
DpcMode DL power control mode SET FRC(Optional) RNC
DPCT DSP type ADD N7DPC(Mandatory) RNC
DPORTNO Dst Port NO. STR IPLOPTST(Mandatory)RNC
DPUSN DPUb Slot No. STR IPLOPTST(Mandatory)RNC
DPX DSP index
ADD N7DPC(Mandatory)
ADD M3DE(Mandatory)
ADD
MTP3LKS(Mandatory)
ADD
ADJNODE(Mandatory)
ADD
CNNODE(Mandatory)
ADD NRNC(Mandatory)
ADD
MTP3RT(Mandatory)
RNC
DR Activation direction ACT VCLCC(Optional) RNC
DraSwitch Dynamic resource allocation switch SET CORRMALGOSWITCH(Optional) RNC
DRDEcN0Threshhold Drd Ec/N0 threshold
ADD
GSMNCELL(Optional)
ADD
INTERFREQNCELL(Optio
nal)
RNC
DrlAal2EstIndTmr DRL AAL2 establishment indication timer SET STATETIMER(Optional) RNC
DrlRecfgCmitTmr DRL reconfiguration commit timer SET STATETIMER(Optional) RNC
DRMaxGSMNum Max inter-RAT direct retry number
SET DRD(Optional)
ADD
CELLDRD(Optional) RNC
DrncBeDlRlcQosSwitch Drnc Parameter for BE Downlink RLC QOS SET QOSACT(Optional) RNC
DROPPKTTHD0 Packet discard threshold of queue 0 ADD PORTFLOWCTRLPARA(Optional) RNC
DROPPKTTHD1 Packet discard threshold of queue 1 ADD PORTFLOWCTRLPARA(Optional) RNC
DROPPKTTHD2 Packet discard threshold of queue 2 ADD PORTFLOWCTRLPARA(Optional) RNC
DROPPKTTHD3 Packet discard threshold of queue 3 ADD PORTFLOWCTRLPARA(Optional) RNC
DROPPKTTHD4 Packet discard threshold of queue 4 ADD PORTFLOWCTRLPARA(Optional) RNC
DROPPKTTHD5 Packet discard threshold of queue 5 ADD PORTFLOWCTRLPARA(Optional) RNC
DrSwitch Direct retry switch SET CORRMALGOSWITCH(Optional) RNC
DrxCycle DRX Cycle SET DTXDRXPARA(Optional) RNC
DrxCycleLenCoef Paging DRX cycle coefficient SET FRC(Optional) RNC
DRXCycleLenCoef DRX cycle length coefficientADD CNDOMAIN(Optional) RNC
DrxGrantMonitoring UE DRX Grant Monitoring Decision SET DTXDRXPARA(Optional) RNC
Drxvalid DRX Parameter Switch SET DTXDRXPARA(Optional) RNC
DS1 E1T1 port No.
ADD
PPPLNK(Mandatory)
ADD MPLNK(Mandatory)
RNC
DsacAutoSwitch Switch for auto DSAC SET DSACAUTOALGO(Optional) RNC
DSCP Differentiated services code point
PING IP(Optional)
SET
DSCPMAP(Mandatory)
ADD SCTPLNK(Optional)
SET
PHBMAP(Mandatory)
RNC
DSPNO Dsp No. STR IPLOPTST(Mandatory)RNC
DST DaylightSave SET TZ(Optional) RNC
DSTE1T1LNKN Destination link No. ADD TSCROSS(Mandatory)RNC
DSTIP Destination IP address
ADD IPRT(Mandatory)
ADD
IPRTBIND(Mandatory)
ADD FLOW(Mandatory)
RNC
DSTMASK Destination address mask ADD IPRT(Mandatory) RNC
DSTMASK Destination address mask ADD IPRTBIND(Mandatory) RNC
DSTTSN Destination time slot No. ADD TSCROSS(Mandatory)RNC
DtxCycle1 DPCCH Transmission Cycle 1 SET DTXDRXPARA(Optional) RNC
DtxCycle2 DPCCH Transmission Cycle 2 SET DTXDRXPARA(Optional) RNC
DtxDrxEnablingDelay delay time of DTX_DRX in action SET FRC(Optional) RNC
DtxLongPreamble Long DPCCH Preamble SET DTXDRXPARA(Optional) RNC
Dtxvalid DTX Parameter Switch SET DTXDRXPARA(Optional) RNC
DUPLEX Duplex Mode SET ETHPORT(Optional) RNC
DynCellOpenJudgeTimerlen Period Timer Length For Cell Dynamic ShutDown feature SET RNCCELLSHUTDOWNPARA(Optional) RNC
DynCellShutdownProtectTimerlen Protect Timer Length For Cell Dynamic ShutDown feature SET RNCCELLSHUTDOWNPARA(Optional) RNC
DynCellShutDownSwitch Cell Dynamic ShutDown Switch For RNC SET RNCCELLSHUTDOWNPARA(Optional) RNC
DynShutdownSwitch Cell Dynamic ShutDown Switch ADD CELLDYNSHUTDOWN(Mandatory) RNC
DynShutDownType Cell Dynamic ShutDown Type ADD CELLDYNSHUTDOWN(Optional) RNC
E1T1LNKN Bearing link No. ADD FRALNK(Mandatory) RNC
E2FThrouMeasPeriod E-DCH Throu Meas Period SET UESTATETRANS(Optional) RNC
E2FThrouPTAT E-DCH2F 4B Pending Period Amount SET UESTATETRANS(Optional) RNC
E2FThrouThd E-DCH2F 4B Threshold SET UESTATETRANS(Optional) RNC
E2FThrouTimeToTrig E-DCH2F 4B Period AmountSET UESTATETRANS(Optional) RNC
EagchCodeNum Code Number for E-AGCH ADD CELLHSUPA(Optional) RNC
ECHOIP Check IP address ADD IPPATH(Mandatory) RNC
EcN0AdjStep Ec/N0 Adjustment Step SET RACHMEASUREPARA(Optional) RNC
EcN0AdjTimerLen Ec/N0 Adjustment Measurement Period SET RACHMEASUREPARA(Optional) RNC
EcN0EffectTime Ec/N0 effective time
SET FRC(Optional)
ADD CELLFRC(Optional)
RNC
EcN0MaxDownAdjStep Maximum Ec/N0 Down StepSET RACHMEASUREPARA(Optional) RNC
EcN0MaxUpAdjStep Maximum Ec/N0 Up Step SET RACHMEASUREPARA(Optional) RNC
EcN0Ths Ec/N0 threshold
SET FRC(Optional)
ADD CELLFRC(Optional)
RNC
EDAY End date SET TZ(Mandatory) RNC
EdchMacdPduSize1 E-DCH MAC-D PDU size1 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize10 E-DCH MAC-D PDU size10ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize11 E-DCH MAC-D PDU size11ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize12 E-DCH MAC-D PDU size12ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize2 E-DCH MAC-D PDU size2 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize3 E-DCH MAC-D PDU size3 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize4 E-DCH MAC-D PDU size4 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize5 E-DCH MAC-D PDU size5 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize6 E-DCH MAC-D PDU size6 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize7 E-DCH MAC-D PDU size7 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize8 E-DCH MAC-D PDU size8 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSize9 E-DCH MAC-D PDU size9 ADD TYPRABHSPA(Optional) RNC
EdchMacdPduSizeNum The Number of E-DCH MAC-D PDU Size ADD TYPRABHSPA(Optional) RNC
EdchPendingTime4A Period Amount after trigger 4A on EDCH ADD TYPRABDCCCMC(Optional) RNC
EdchPendingTime4B Period Amount after trigger 4B on EDCH ADD TYPRABDCCCMC(Optional) RNC
EdchRateAdjustSet HSUPA UpLink Rate Adjust Set SET EDCHRATEADJUSTSET(Optional) RNC
EdchSirMaxDownStep Maximum E-DCH SIR decrease step ADD TYPRABOLPC(Mandatory) RNC
EdchTargetLargeRetransNumEdch Target Large Number of E-DCH PDU retransfer ADD TYPRABOLPC(Mandatory) RNC
EdchTargetLittleRetransNumEdch Little Target Number of E-DCH PDU retransfer ADD TYPRABOLPC(Mandatory) RNC
EdchTimetoTrigger4A Period Amount to trigger 4A on EDCH ADD TYPRABDCCCMC(Optional) RNC
EdchTimetoTrigger4B Period Amount to trigger 4B on EDCH ADD TYPRABDCCCMC(Optional) RNC
EdchTtiType Edch TTI type SET DTXDRXPARA(Mandatory) RNC
EFACHDL EFACH channel forward factor ADD TRMFACTOR(Optional) RNC
EFACHDTCHGBP EFACH DTCH GBP ADD CELLEFACH(Optional) RNC
EFachSupInd EFachSupInd ADD NRNCCELL(Mandatory) RNC
EFachSwitch switch for RRC established on E_FACH SET RRCESTCAUSE(Optional) RNC
EHSPACMPermissionInd CM permission ind on HSPA+ SET CMCF(Optional) RNC
EM EndType SET TZ(Mandatory) RNC
EmcPreeRefVulnSwitch Preemptvulnerability for Emergency call switch SET QUEUEPREEMPT(Optional) RNC
EMERGENCY Emergency verification ADD MTP3LKS(Optional) RNC
EmergLCSSwitch Emergency LCS Switch SET SMLC(Optional) RNC
EMONTH End month SET TZ(Mandatory) RNC
EMSIP EMS IP Address ADD EMSIP(Mandatory) RNC
EncryptionAlgo Encryption algorithm SET UEA(Optional) RNC
EndTime1 First Cell Dynamic ShutDown Interval End Time ADD CELLDYNSHUTDOWN(Mandatory) RNC
EndTime2 Second Cell Dynamic ShutDown Interval End Time ADD CELLDYNSHUTDOWN(Mandatory) RNC
EndTime3 Third Cell Dynamic ShutDown Interval End Time ADD CELLDYNSHUTDOWN(Mandatory) RNC
ENTITYT Destination entity type
ADD M3DE(Mandatory)
ADD M3LE(Mandatory) RNC
ERFAMEventPara Err Frmae Event Para ACT ETHOAMAH(Optional) RNC
ERFAMEventPrid Err Frmae Event Prid ACT ETHOAMAH(Optional) RNC
ERFAMPRDEventPara Err Frmae Cyc Event Para ACT ETHOAMAH(Optional) RNC
ERFAMPRDEventPrid Err Frmae Cyc Event Prid ACT ETHOAMAH(Optional) RNC
ERFAMSCDEventPara Err Frmae Sec Event Para ACT ETHOAMAH(Optional) RNC
ERFAMSCDEventPrid Err Frmae Sec Event Prid ACT ETHOAMAH(Optional) RNC
ErgchEhichCodeNum Code Number for E-RGCH/E-HICH ADD CELLHSUPA(Optional) RNC
ESTINDTMR Establishment indication timer SET AAL2TMR(Optional) RNC
ESTREQTMR Establishment request timer SET AAL2TMR(Optional) RNC
ET EndTime SET TZ(Mandatory) RNC
Event4aThd Traffic Measurement Event 4A threshold ADD TYPRABDCCCMC(Optional) RNC
Event4bThd Traffic Measurement Event 4B threshold ADD TYPRABDCCCMC(Mandatory) RNC
EventAReportDelay Event A report delay ADD TYPRABRLC(Optional) RNC
EventAThred Event A threshold ADD TYPRABRLC(Optional) RNC
EventBThred Event B threshold ADD TYPRABRLC(Optional) RNC
EWEEK End week SET TZ(Mandatory) RNC
EWSEQ End week sequence SET TZ(Mandatory) RNC
EX_ANO1_SIG_MAX Upper Limit of Signal Output of External Analog 1 ADD EMU(Optional) RNC
EX_ANO1_SIG_MIN Lower Limit of Signal Output of External Analog 1 ADD EMU(Optional) RNC
EX_ANO1_TYPE Sensor Type of External Analog 1 ADD EMU(Optional) RNC
EX_ANO1_VAL_MAX Upper Limit of Measurement Range of External Analog 1 ADD EMU(Optional) RNC
EX_ANO1_VAL_MIN Lower Limit of Measurement Range of External Analog 1 ADD EMU(Optional) RNC
EX_ANO2_SIG_MAX Upper Limit of Signal Output of External Analog 2 ADD EMU(Optional) RNC
EX_ANO2_SIG_MIN Lower Limit of Signal Output of External Analog 2 ADD EMU(Optional) RNC
EX_ANO2_TYPE Sensor Type of External Analog 2 ADD EMU(Optional) RNC
EX_ANO2_VAL_MAX Upper Limit of Measurement Range of External Analog 2 ADD EMU(Optional) RNC
EX_ANO2_VAL_MIN Lower Limit of Measurement Range of External Analog 2 ADD EMU(Optional) RNC
EX_ANO3_SIG_MAX Upper Limit of Signal Output of External Analog 3 ADD EMU(Optional) RNC
EX_ANO3_SIG_MIN Lower Limit of Signal Output of External Analog 3 ADD EMU(Optional) RNC
EX_ANO3_TYPE Sensor Type of External Analog 3 ADD EMU(Optional) RNC
EX_ANO3_VAL_MAX Upper Limit of Measurement Range of External Analog 3 ADD EMU(Optional) RNC
EX_ANO3_VAL_MIN Lower Limit of Measurement Range of External Analog 3 ADD EMU(Optional) RNC
EX_ANO4_SIG_MAX Upper Limit of Signal Output of External Analog 4 ADD EMU(Optional) RNC
EX_ANO4_SIG_MIN Lower Limit of Signal Output of External Analog 4 ADD EMU(Optional) RNC
EX_ANO4_TYPE Sensor Type of External Analog 4 ADD EMU(Optional) RNC
EX_ANO4_VAL_MAX Upper Limit of Measurement Range of External Analog 4 ADD EMU(Optional) RNC
EX_ANO4_VAL_MIN Lower Limit of Measurement Range of External Analog 4 ADD EMU(Optional) RNC
F2PTvmPTAT BE F2P 4B Pending Time SET UESTATETRANS(Optional) RNC
F2PTvmTimeToTrig BE F2P 4B Time SET UESTATETRANS(Optional) RNC
FachId FACH ID ADD CTCH(Mandatory) RNC
FachIdforMcch FACH ID for MCCH ADD CELLMCCH(Mandatory) RNC
FachMaxPower Fach Max Power
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional)
SET
MSCHFACH(Optional)
RNC
FACHMeasInd FACH Meas Indicator ADD CELLMEAS(Optional)RNC
FACHPwrReduceValue FACH power reduce value ADD CELLOLC(Optional) RNC
FACTOR SPI Factor SET SPIFACTOR(Mandatory) RNC
FACTOR Factor SET CTRLFACTOR(Mandatory) RNC
FailTimeTh DCCC Rate Up Fail Time Threshold SET DCCC(Optional) RNC
FC Flow Control SET ETHPORT(Optional) RNC
FCINDEX Flow control parameter index
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
SET OPT(Mandatory)
SET
ETHPORT(Mandatory)
ADD MPGRP(Optional)
ADD PPPLNK(Optional)
ADD UNILNK(Optional)
ADD
ATMLOGICPORT(Option
al)
ADD
PORTFLOWCTRLPARA(
Mandatory)
ADD
IPLOGICPORT(Optional)
RNC
FCSTYPE CRC check mode
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
RNC
FddTpcDlStepSize FDD DL power control step size SET FRC(Optional) RNC
FdpchDivModforMIMO F-DPCH diversity mode for MIMO user
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional) RNC
FdpchDivModforNonMIMOF-DPCH diversity mode for non MIMO user
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional) RNC
FdpchMaxRefPwr FDPCH maximum reference power SET FDPCHRLPWR(Optional) RNC
FdpchMinRefPwr FDPCH minimum reference power SET FDPCHRLPWR(Optional) RNC
FdpchPO2 F-DPCH Power Offset SET FDPCHPARA(Optional) RNC
FEDHCPSVRIP FE Dhcp Server IP ADD NODEBESN(Mandatory) RNC
FILENAME Export file name
EXP CFGMML(Optional)
BKP DB(Optional)
RNC
FILEPATH Export file path EXP CFGMML(Optional) RNC
FilterCoef Intra-freq meas L3 filter coeffSET INTRAFREQHO(Optional) RNC
FilterCoefOf2D2F 2D2F filter coeff
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
FixedMachsWinSize Fixed MAC-hs window size ADD NODEBLMTPARA(Optional) RNC
FlcAlgoSwitch Flc Algo Switch ADD CELLMCCH(Optional) RNC
FLOWCTRLSWITCH Flow control switch
ADD FRALNK(Optional)
SET OPT(Optional)
ADD PPPLNK(Optional)
ADD IMAGRP(Optional)
ADD
IPLOGICPORT(Optional)
ADD MPGRP(Optional)
ADD UNILNK(Optional)
ADD
ATMLOGICPORT(Option
al)
SET ETHPORT(Optional)
RNC
FLOWID Flow ID ADD FLOW(Mandatory) RNC
FN File Name ACT LICENSE(Optional) RNC
FN File Name EXP ELABEL(Optional) RNC
ForcedSHOSwitch ForcedSho Switch In CELLID+RTT Method SET SMLC(Optional) RNC
FPMUXSWITCH FPMUX flag ADD IPPATH(Optional) RNC
FPTIMER the maximal time for FP MUXADD IPPATH(Optional) RNC
FRAGSIZE MP flake size ADD MPGRP(Optional) RNC
FRALNKN Fractional link No. ADD FRALNK(Mandatory) RNC
FRALNKT Fractional link type ADD FRALNK(Mandatory) RNC
FRMLEN TX frame length ADD IMAGRP(Optional) RNC
FTI Factor table index ADD ADJMAP(Mandatory) RNC
FTI Factor table index ADD TRMFACTOR(Mandatory) RNC
FUNCTIONSWITCH1 Function Switch1 ACT LICENSE(Optional) RNC
FUNCTIONSWITCH2 Function Switch2 ACT LICENSE(Optional) RNC
FUNCTIONSWITCH3 Function Switch3 ACT LICENSE(Optional) RNC
FUNCTIONSWITCH4 Function Switch4 ACT LICENSE(Optional) RNC
FWDCONGBW Forward congestion threshold
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
ADD
IPLOGICPORT(Optional)
RNC
FWDCONGBW Forward congestion thresholdADD ATMLOGICPORT(Optional) RNC
FWDCONGBW Forward congestion thresholdADD AAL2PATH(Optional)RNC
FWDCONGBW Forward congestion thresholdADD IPPATH(Optional) RNC
FWDCONGBW Forward congestion thresholdADD RSCGRP(Optional) RNC
FWDCONGCLRBW Forward congestion clear threshold
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
RNC
FWDCONGCLRBW Forward congestion clear threshold ADD IPLOGICPORT(Optional) RNC
FWDCONGCLRBW Forward congestion clear threshold ADD ATMLOGICPORT(Optional) RNC
FWDCONGCLRBW Forward congestion clear threshold ADD AAL2PATH(Optional)RNC
FWDCONGCLRBW Forward congestion clear threshold ADD IPPATH(Optional) RNC
FWDCONGCLRBW Forward congestion clear threshold ADD RSCGRP(Optional) RNC
FWDHORSVBW Forward handover reserved bandwidth
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
ADD
IPLOGICPORT(Optional)
RNC
FWDHORSVBW Forward handover reserved bandwidth ADD ATMLOGICPORT(Optional) RNC
FWDHORSVBW Forward handover reserved bandwidth ADD AAL2PATH(Optional)RNC
FWDHORSVBW Forward handover reserved bandwidth ADD IPPATH(Optional) RNC
FWDHORSVBW Forward handover reserved bandwidth ADD RSCGRP(Optional) RNC
GainFactorBetaC Gain Factor BetaC ADD PRACHTFC(Mandatory) RNC
GainFactorBetaD Gain Factor BetaD ADD PRACHTFC(Optional)RNC
GATEWAY Check IP address STR IPCHK(Mandatory) RNC
GCDF Geo-coordinate data format ADD SMLCCELL(Optional)RNC
GCDF GCDF ADD GPS(Optional) RNC
GENCCHDL General common channel service downlink factor ADD TRMFACTOR(Optional) RNC
GENCCHUL General common channel service uplink factor ADD TRMFACTOR(Optional) RNC
GoldMaxMode Max Mode Of Wideband AMRC For Golden Users
ADD
CELLAMRCWB(Optional)
SET AMRCWB(Optional)
RNC
GoldMaxMode Max Mode Of Narrowband AMRC For Golden Users
ADD
CELLAMRC(Optional)
SET AMRC(Optional)
RNC
GoldUserLoadControlSwitchGold user load control switchADD CELLLDR(Optional) RNC
GPSPERIOD GPS data report period ADD GPS(Optional) RNC
GRPID Transport Resource Group No. ADD RSCGRP(Mandatory) RNC
GRPT Transport Resource Group Type ADD RSCGRP(Mandatory) RNC
GSMCellIndex GSM cell index
ADD
GSMCELL(Mandatory)
HO CELL(Optional)
ADD
GSMNCELL(Mandatory) RNC
GSMCellName GSM cell name ADD GSMCELL(Mandatory) RNC
HangBlockNum5A Interval Block Number ADD TYPRABQUALITYMEAS(Mandatory) RNC
HappyBR Happy bit rate SET USERHAPPYBR(Optional) RNC
HarqPreaCap HARQ Preamble capability indication ADD NRNCCELL(Optional)RNC
HBDelaycnd Happy bit delay time ADD TYPRABHSPA(Optional) RNC
HBINTER Heartbeat interval ADD SCTPLNK(Optional) RNC
HCARRYT High bearing type ADD VPCLCX(Mandatory) RNC
HCodeAdjPunshTimerLengthPunish Timer Length for Code Adjust for HSDPA ADD CELLHSDPA(Optional) RNC
HCSPrio HCS priority level
ADD CELLHCS(Optional)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Optional)
RNC
HDBKGDL HSDPA background service downlink factor ADD TRMFACTOR(Optional) RNC
HDBKGPRIPATH HSDPA background primary path ADD TRMMAP(Optional) RNC
HDBKGPRITH HSDPA background pri path load threshold ADD LOADEQ(Optional) RNC
HDBKGSECPATH HSDPA background secondary path ADD TRMMAP(Optional) RNC
HDBKGSECWHT HSDPA background pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDCONVDL HSDPA conversational service downlink factor ADD TRMFACTOR(Optional) RNC
HDCONVPRIPATH HSDPA conversational primary path ADD TRMMAP(Optional) RNC
HDCONVPRITH HSDPA conversational pri path load threshold ADD LOADEQ(Optional) RNC
HDCONVSECPATH HSDPA conversational secondary path ADD TRMMAP(Optional) RNC
HDCONVSECWHT HSDPA conversational pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDHIGHINTERACTPRITHHSDPA high interactive pri path load threshold ADD LOADEQ(Optional) RNC
HDHIGHINTERACTSECWHT HSDPA high pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDINTERDL HSDPA interactive service downlink factor ADD TRMFACTOR(Optional) RNC
HDINTHGHPRIPATH HSDPA high PRI interactive primary path ADD TRMMAP(Optional) RNC
HDINTHGHSECPATH HSDPA high PRI interactive secondary path ADD TRMMAP(Optional) RNC
HDINTLOWPRIPATH HSDPA low PRI interactive primary path ADD TRMMAP(Optional) RNC
HDINTLOWSECPATH HSDPA low PRI interactive secondary path ADD TRMMAP(Optional) RNC
HDINTMIDPRIPATH HSDPA middle PRI interactive primary path ADD TRMMAP(Optional) RNC
HDINTMIDSECPATH HSDPA middle PRI interactive secondary path ADD TRMMAP(Optional) RNC
HDLOWINTERACTPRITHHSDPA low interactive pri path load threshold ADD LOADEQ(Optional) RNC
HDLOWINTERACTSECWHT HSDPA low interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDMIDINTERACTPRITH HSDPA mid interactive pri path load threshold ADD LOADEQ(Optional) RNC
HDMIDINTERACTSECWHT HSDPA mid interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDSIPDL HSDPA IMS signal downlink factor ADD TRMFACTOR(Optional) RNC
HDSIPPRIPATH HSDPA IMS Signal primary path ADD TRMMAP(Optional) RNC
HDSIPPRITH HSDPA IMS Signal pri path load threshold ADD LOADEQ(Optional) RNC
HDSIPSECPATH HSDPA IMS Signal secondary path ADD TRMMAP(Optional) RNC
HDSIPSECWHT HSDPA IMS Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDSRBDL HSDPA signal downlink factor ADD TRMFACTOR(Optional) RNC
HDSRBPRIPATH HSDPA Signal primary path ADD TRMMAP(Optional) RNC
HDSRBPRITH HSDPA Signal pri path load threshold ADD LOADEQ(Optional) RNC
HDSRBSECPATH HSDPA Signal secondary path ADD TRMMAP(Optional) RNC
HDSRBSECWHT HSDPA Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDSTRMDL HSDPA streaming service downlink factor ADD TRMFACTOR(Optional) RNC
HDSTRMPRIPATH HSDPA streaming primary path ADD TRMMAP(Optional) RNC
HDSTRMPRITH HSDPA streaming pri path load threshold ADD LOADEQ(Optional) RNC
HDSTRMSECPATH HSDPA streaming secondary path ADD TRMMAP(Optional) RNC
HDSTRMSECWHT HSDPA streaming pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HDVOICEDL HSDPA voice service downlink factor ADD TRMFACTOR(Optional) RNC
HDVOICEPRIPATH HSDPA Voice primary path ADD TRMMAP(Optional) RNC
HDVOICESECPATH HSDPA Voice secondary pathADD TRMMAP(Optional) RNC
HFRAATMLNKN High FRAATM link No. ADD VPCLCX(Optional) RNC
HhoRelocProcSwitch Relocation with HHO process switch ADD NRNC(Optional) RNC
HHOTRIG HHO cross IUR trigger ADD NRNC(Mandatory) RNC
HIMAGRPN High IMA group No. ADD VPCLCX(Optional) RNC
HoAsuTmr HO active set update response timer SET STATETIMER(Optional) RNC
HoCellUpdateRspTmr HO cell update response timer SET STATETIMER(Optional) RNC
HOCovPrio The priority of coverage based inter-frequency handover ADD INTERFREQNCELL(Optional) RNC
HoPagingRspTmr HO paging response timer SET STATETIMER(Optional) RNC
HoPhychRecfgTmr HO PhyCh reconfiguration timer SET STATETIMER(Optional) RNC
HoRelocReqTmr HO relocation request timer SET STATETIMER(Optional) RNC
HostType NodeB Host Type ADD NODEB(Optional) RNC
HoSwitch HandOver switch SET CORRMALGOSWITCH(Optional) RNC
HOThdEcN0 Inter-freq measure target frequency trigger Ec/No THD ADD CELLMBDRINTERFREQ(Optional) RNC
HOThdRscp Inter-freq measure target frequency trigger RSCP THD ADD CELLMBDRINTERFREQ(Optional) RNC
HoWtTrchRecfgRspTmr HO wait timer for TrCH or RB reconfiguration response SET STATETIMER(Optional) RNC
HPN High NCOPT port No. ADD VPCLCX(Optional) RNC
HsdpaBackGroundAF AF of hsdpa background service SET ADMCTRL(Optional) RNC
HsdpaBePBRThd HSDPA best effort PBR threshold ADD CELLCAC(Optional) RNC
HsdpaCMPermissionInd CM permission ind on HSDPA SET CMCF(Optional) RNC
HsdpaConvAF AF of hsdpa conv service SET ADMCTRL(Optional) RNC
HsdpaInteractAF AF of hsdpa interactive service SET ADMCTRL(Optional) RNC
HsdpaNeedPwrFilterLen HSDPA need power filter len
SET LDM(Optional)
SET SATLDM(Optional) RNC
HsdpaPrvidBitRateFilterLen HSDPA bit rate filter len
SET LDM(Optional)
SET SATLDM(Optional) RNC
HsdpaRabEstAttMinNum The minimum of HSDPA Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC
HsdpaRabEstSuccRatioThd HSDPA Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC
HsdpaStreamAF AF of hsdpa streaming service SET ADMCTRL(Optional) RNC
HsdpaStrmPBRThd HSDPA streaming PBR threshold ADD CELLCAC(Optional) RNC
HSDPAthroughput Max throughput of HSDPA ACT LICENSE(Optional) RNC
HsdpaUserNumThd Cell Dynamic ShutDown Hsdpa User number Threshold ADD CELLDYNSHUTDOWN(Optional) RNC
HsdschMacdPduSize1 HS-DSCH MAC-D PDU size1 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize2 HS-DSCH MAC-D PDU size2 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize3 HS-DSCH MAC-D PDU size3 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize4 HS-DSCH MAC-D PDU size4 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize5 HS-DSCH MAC-D PDU size5 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize6 HS-DSCH MAC-D PDU size6 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize7 HS-DSCH MAC-D PDU size7 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSize8 HS-DSCH MAC-D PDU size8 ADD TYPRABHSPA(Optional) RNC
HsdschMacdPduSizeNum The Number of HS-DSCH MAC-D PDU Size ADD TYPRABHSPA(Optional) RNC
HSN High slot No. ADD VPCLCX(Mandatory) RNC
HspaEnhSwitch Cell Hspa Enhanced function switch ADD CELLALGOSWITCH(Optional) RNC
HSPAPlusSelection prefered HSPA PLUS character SET FRC(Optional) RNC
HspaPlusSwitch Cell Hspa Plus function switch ADD CELLALGOSWITCH(Optional) RNC
HspaPower The Offset of HSPA Total Power ADD CELLHSDPA(Optional) RNC
HspaTimerLen HSPA hysteresis timer lengthSET HOCOMM(Optional) RNC
HspdcchSecondCodeSupp1 Support second code Flag for Tb1 SET HSSCCHLESSOPPARA(Optional) RNC
HspdcchSecondCodeSupp2 Support second code Flag for Tb2 SET HSSCCHLESSOPPARA(Optional) RNC
HspdcchSecondCodeSupp3 Support second code Flag for Tb3 SET HSSCCHLESSOPPARA(Optional) RNC
HspdcchSecondCodeSupp4 Support second code Flag for Tb4 SET HSSCCHLESSOPPARA(Optional) RNC
HsPdschCodeNum Code Number for HS-PDSCHADD CELLHSDPA(Optional) RNC
HsPdschMaxCodeNum Code Max Number for HS-PDSCH ADD CELLHSDPA(Optional) RNC
HsPdschMinCodeNum Code Min Number for HS-PDSCH ADD CELLHSDPA(Optional) RNC
HsPdschMPOConstEnum HS-PDSCH MPO Constant ADD CELLHSDPA(Optional) RNC
HspdschPrioTxDiversityMode Hspdsch priority Tx diversity mode
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
RNC
HSRN High subrack No. ADD VPCLCX(Mandatory) RNC
HsScchCodeNum Code Number for HS-SCCH ADD CELLHSDPA(Optional) RNC
Hsupa10msSchPrdForGrant HSUPA TTI 10ms schedule period with grant SET FRC(Optional) RNC
Hsupa10msSchPrdForNonGrant HSUPA TTI 10ms schedule period without grant SET FRC(Optional) RNC
Hsupa2msSchPrdForGrant HSUPA TTI 2ms schedule period with grant SET FRC(Optional) RNC
Hsupa2msSchPrdForNonGrant HSUPA TTI 2ms schedule period without grant SET FRC(Optional) RNC
HsupaBackGroundAF AF of hsupa background service SET ADMCTRL(Optional) RNC
HsupaBeShoRateThd HSUPA BE SHO THD RATESET DCCC(Optional) RNC
HsupaCeConsumeSelection HSUPA Credit Consume Type ADD NODEBALGOPARA(Optional) RNC
HsupaCMPermissionInd CM permission ind on HSUPA SET CMCF(Optional) RNC
HsupaConvAF AF of hsupa conv service SET ADMCTRL(Optional) RNC
HsupaDcccStg HSUPA DCCC Strategy SET DCCC(Optional) RNC
HsupaEqualPriorityUserPBRThd Equal priority HSUPA user PBR threshold ADD CELLCAC(Optional) RNC
HsupaHighPriorityUserPBRThd High priority HSUPA user PBR threshold ADD CELLCAC(Optional) RNC
HsupaInitialRate Initial rate of HSUPA BE traffic SET FRC(Optional) RNC
HsupaInteractAF AF of hsupa interactive service SET ADMCTRL(Optional) RNC
HsupaLowPriorityUserPBRThd Low priority HSUPA user PBR threshold ADD CELLCAC(Optional) RNC
HsupaPrvidBitRateFilterLen HSUPA bit rate filter len SET LDM(Optional) RNC
HsupaRabEstAttMinNum The minimum of HSUPA Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC
HsupaRabEstSuccRatioThd HSUPA Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC
HsupaStreamAF AF of hsupa streaming service SET ADMCTRL(Optional) RNC
HSUPAthroughput Max throughput of HSUPA ACT LICENSE(Optional) RNC
HsupAuRetrnsLdRelThd HSUPA auto retransmit load release threshold ADD CELLLDM(Optional) RNC
HsupAuRetrnsLdTrigThd HSUPA auto retransmit load trigger threshold ADD CELLLDM(Optional) RNC
HsupaUserNumThd Cell Dynamic ShutDown Hsupa User number Threshold ADD CELLDYNSHUTDOWN(Optional) RNC
HUBKGPRIPATH HSUPA background primary path ADD TRMMAP(Optional) RNC
HUBKGPRITH HSUPA background pri path load threshold ADD LOADEQ(Optional) RNC
HUBKGSECPATH HSUPA background secondary path ADD TRMMAP(Optional) RNC
HUBKGSECWHT HSUPA background pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUBKGUL HSUPA background service uplink factor ADD TRMFACTOR(Optional) RNC
HUCONVPRIPATH HSUPA conversational primary path ADD TRMMAP(Optional) RNC
HUCONVPRITH HSUPA conversational pri path load threshold ADD LOADEQ(Optional) RNC
HUCONVSECPATH HSUPA conversational secondary path ADD TRMMAP(Optional) RNC
HUCONVSECWHT HSUPA conversational pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUCONVUL HSUPA conversational service uplink factor ADD TRMFACTOR(Optional) RNC
HUHIGHINTERACTPRITHHSUPA high interactive pri path load threshold ADD LOADEQ(Optional) RNC
HUHIGHINTERACTSECWHT HSUPA high interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUINTERUL HSUPA interactive service uplink factor ADD TRMFACTOR(Optional) RNC
HUINTHGHPRIPATH HSUPA high PRI interactive primary path ADD TRMMAP(Optional) RNC
HUINTHGHSECPATH HSUPA high PRI interactive secondary path ADD TRMMAP(Optional) RNC
HUINTLOWPRIPATH HSUPA low PRI interactive primary path ADD TRMMAP(Optional) RNC
HUINTLOWSECPATH HSUPA low PRI interactive secondary path ADD TRMMAP(Optional) RNC
HUINTMIDPRIPATH HSUPA middle PRI interactive primary path ADD TRMMAP(Optional) RNC
HUINTMIDSECPATH HSUPA middle PRI interactive secondary path ADD TRMMAP(Optional) RNC
HULOWINTERACTPRITHHSUPA low interactive pri path load threshold ADD LOADEQ(Optional) RNC
HULOWINTERACTSECWHT HSUPA low interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUM_MASK Enable Humidity Alarm Reporting ADD EMU(Optional) RNC
HUM_THD_HIGH Upper Limit of Humidity Alarm ADD EMU(Optional) RNC
HUM_THD_LOW Lower Limit of Humidity Alarm ADD EMU(Optional) RNC
HUMIDINTERACTPRITH HSUPA mid interactive pri path load threshold ADD LOADEQ(Optional) RNC
HUMIDINTERACTSECWHT HSUPA mid interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUNILNKN High UNI link No. ADD VPCLCX(Optional) RNC
HUSIPPRIPATH HSUPA IMS Signal primary path ADD TRMMAP(Optional) RNC
HUSIPPRITH HSUPA IMS Signal pri path load threshold ADD LOADEQ(Optional) RNC
HUSIPSECPATH HSUPA IMS Signal secondary path ADD TRMMAP(Optional) RNC
HUSIPSECWHT HSUPA IMS Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUSIPUL HSUPA IMS signal uplink factor ADD TRMFACTOR(Optional) RNC
HUSRBPRIPATH HSUPA Signal primary path ADD TRMMAP(Optional) RNC
HUSRBPRITH HSUPA Signal pri path load threshold ADD LOADEQ(Optional) RNC
HUSRBSECPATH HSUPA Signal secondary path ADD TRMMAP(Optional) RNC
HUSRBSECWHT HSUPA Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUSRBUL HSUPA signal uplink factor ADD TRMFACTOR(Optional) RNC
HUSTRMPRIPATH HSUPA streaming primary path ADD TRMMAP(Optional) RNC
HUSTRMPRITH HSUPA streaming pri path load threshold ADD LOADEQ(Optional) RNC
HUSTRMSECPATH HSUPA streaming secondary path ADD TRMMAP(Optional) RNC
HUSTRMSECWHT HSUPA streaming pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
HUSTRMUL HSUPA streaming service uplink factor ADD TRMFACTOR(Optional) RNC
HUVOICEPRIPATH HSUPA Voice primary path ADD TRMMAP(Optional) RNC
HUVOICESECPATH HSUPA Voice secondary pathADD TRMMAP(Optional) RNC
HUVOICEUL HSUPA voice service uplink factor ADD TRMFACTOR(Optional) RNC
HVCI High VCI ADD VPCLCX(Optional) RNC
HVPI High VPI ADD VPCLCX(Mandatory) RNC
HystFor1A 1A hysteresis
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
HystFor1B 1B hysteresis
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
HystFor1C 1C hysteresis
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
HystFor1D 1D hysteresis
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
HystFor1F 1F hysteresis
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
HystFor1J 1J hysteresis
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
HystFor2B 2B hysteresis
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
Hystfor2C 2C hysteresis
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
HystFor2D 2D hysteresis
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
HystFor2F 2F hysteresis
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
Hystfor3A 3A hysteresis
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
Hystfor3C 3C hysteresis
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
HystforInterRAT Inter-RAT hysteresis
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
HystForPrdInterFreq HHO hysteresis
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
IARXTMR Inactive RX timer SET SCCPTMR(Optional) RNC
IATXTMR Inactive TX timer SET SCCPTMR(Optional) RNC
ICMPPKGLEN ICMP packet Length ADD IPPATH(Optional) RNC
ID Task ID STR SCHTSK(Optional) RNC
IdleCellBarred Cell barred indicator for SIB3ADD CELLACCESSSTRICT(Mandatory) RNC
IdleIntraFreqReselection Intra-freq cell reselection ind for SIB3 ADD CELLACCESSSTRICT(Optional) RNC
IdleQhyst1s Hysteresis 1 for idle mode ADD CELLSELRESEL(Optional) RNC
IdleQhyst2s Hysteresis 2 for idle mode ADD CELLSELRESEL(Optional) RNC
IdleQoffset1sn IdleQoffset1sn
ADD
INTERFREQNCELL(Optio
nal)
ADD
INTRAFREQNCELL(Opti
onal)
RNC
IdleQoffset2sn IdleQoffset2sn
ADD
INTERFREQNCELL(Optio
nal)
ADD
INTRAFREQNCELL(Opti
onal)
RNC
IdleSintersearch Inter-freq cell reselection threshold for idle mode ADD CELLSELRESEL(Optional) RNC
IdleSintrasearch Intra-freq cell reselection threshold for idle mode ADD CELLSELRESEL(Optional) RNC
IdleTbarred Time barred for SIB3 ADD CELLACCESSSTRICT(Optional) RNC
IDLETMR Timer_Idle ADD SAALLNK(Optional) RNC
IFAntiPingpangTimerLengthThe timer length of anti pingpong NCOV interfreq handover SET HOCOMM(Optional) RNC
IgorTmr TigOR SET IUTIMERANDNUM(Optional) RNC
IMAGRPN IMA group No.
ADD
IMAGRP(Mandatory)
ADD
FRALNK(Mandatory)
ADD
IMALNK(Mandatory) RNC
IMAID IMA ID ADD IMAGRP(Optional) RNC
IMALNKN IMA link No.
ADD
IMALNK(Mandatory)
STR IMATST(Mandatory)
RNC
IMAVER IMA protocol version ADD IMAGRP(Optional) RNC
ImsBearEnhancedSwitch IMS Bear enhanced switch SET FRC(Optional) RNC
ImsChlType IMS channel type SET FRCCHLTYPEPARA(Optional) RNC
IMSGBR IMS MAC-c flow GBR ADD CELLEFACH(Optional) RNC
IMSI IMSI ID RST IUR(Mandatory) RNC
ImsiMax The end of IMSI ADD IMSISNAMAP(Mandatory) RNC
ImsiMin The start of IMSI ADD IMSISNAMAP(Mandatory) RNC
ImsInitialAccessRate IMS initial rate SET FRC(Mandatory) RNC
ImsiRtMax Maximum of IMSI route parameter in IDNNS ADD IMSIIDNNSCNIDMAP(Mandatory) RNC
ImsiRtMin Minimum of IMSI route parameter in IDNNS ADD IMSIIDNNSCNIDMAP(Mandatory) RNC
IMSMBR IMS MAC-c flow MBR ADD CELLEFACH(Optional) RNC
InactThsForCycle2 Threshold For DPCCH Transmission Cycle 2 SET DTXDRXPARA(Optional) RNC
InactThsForDrxCycle DRX Inactivity Threshold SET DTXDRXPARA(Optional) RNC
InactThsForGrantMonitoringInactivity Threshold for UE Grant Monitoring SET DTXDRXPARA(Optional) RNC
INFRA_RED_MASK Enable Infrared Sensor Alarm Reporting ADD EMU(Optional) RNC
INHT Inhibit Type INH BRD(Mandatory) RNC
INHTMR Timer_NO-CREDIT ADD SAALLNK(Optional) RNC
IntegrityProtectAlgo Integrity protection algorithmSET UIA(Optional) RNC
INTERACTGBR Interactive MAC-c flow GBRADD CELLEFACH(Optional) RNC
INTERACTMBR Interactive MAC-c flow MBRADD CELLEFACH(Optional) RNC
InterFreqActiveType MBDR switch ADD CELLMBDRINTERFREQ(Optional) RNC
InterFreqCovHOThdEcN0 Inter-freq measure target frequency trigger Ec/No THD ADD CELLINTERFREQHONCOV(Optional) RNC
InterFreqCSThd2DEcN0 Inter-freq CS measure start Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqCSThd2DRSCP Inter-freq CS measure start RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqCSThd2FEcN0 Inter-freq CS measure stop Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqCSThd2FRSCP Inter-freq CS measure stop RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqDlMbdrTrigThreshold DL theshold ADD CELLMBDRINTERFREQ(Optional) RNC
InterFreqFilterCoef Inter-frequency measure filter coeff
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
InterFreqHOSwitch Inter-freq handover type switch ADD CELLHOCOMM(Optional) RNC
InterFreqHThd2DEcN0 Inter-freq H measure start Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqHThd2DRSCP Inter-freq H measure start RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqHThd2FEcN0 Inter-freq H measure stop Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqHThd2FRSCP Inter-freq H measure stop RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqInterRatMeasInd Inter-freq/Inter-RAT Meas Ctrl Info Ind ADD CELLMEAS(Optional)RNC
InterFreqMeasQuantity Inter-freq Measure Quantity ADD CELLMBDRINTERFREQ(Optional) RNC
InterFreqMeasTime Inter-freq measure timer length
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
InterFreqNCellDetectSwitch Inter-Frequency Neighboring Cell Detect Switch SET NCELLDETECTSWITCH(Optional) RNC
InterFreqNCovHOThdEcN0 Inter-freq measure target frequency trigger Ec/No THD SET INTERFREQHONCOV(Optional) RNC
InterFreqR99PsThd2DEcN0 Inter-freq R99 PS measure start Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqR99PsThd2DRSCPInter-freq R99 PS measure start RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqR99PsThd2FEcN0 Inter-freq R99 PS measure stop Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqR99PsThd2FRSCP Inter-freq R99 PS measure stop RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
InterFreqRATSwitch Inter-freq and Inter-RAT coexist switch ADD CELLHOCOMM(Optional) RNC
InterFreqReportMode Inter-frequency measure report mode
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
InterFreqTreselScalingFactorInter-freqency scaling factor for reselection delay ADD CELLSELRESEL(Optional) RNC
InterFreqUlMbdrTrigThreshold UL theshold ADD CELLMBDRINTERFREQ(Optional) RNC
InterPlmnHoAllowedInterRatInter RAT Inter Plmn Ho Allowed SET OPERATORSHARINGMODE(Optional) RNC
InterPlmnHoAllowedIntraRatIntra RAT Inter Plmn Ho Allowed SET OPERATORSHARINGMODE(Optional) RNC
InterRatActiveType MBDR switch ADD CELLMBDRINTERRAT(Optional) RNC
InterRATCSThd2DEcN0 Inter-RAT CS measure start Ec/No THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATCSThd2DRSCP Inter-RAT CS measure start RSCP THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATCSThd2FEcN0 Inter-RAT CS measure stop Ec/No THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATCSThd2FRSCP Inter-RAT CS measure stop RSCP THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRatDlMbdrTrigThreshold DL theshold ADD CELLMBDRINTERRAT(Optional) RNC
InterRATFilterCoef Inter-RAT filter coeff
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
InterRATHOAttempts Inter-RAT handover max attempt times
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
InterRatHOPermit Emergency LCS Inter-Rat Handover Permit SET SMLC(Optional) RNC
InterRATHOThd Inter-RAT CS handover decision THD ADD CELLMBDRINTERRAT(Optional) RNC
InterRatHOType Inter-Rat Handover Type SET SMLC(Optional) RNC
InterRATHThd2DEcN0 Inter-RAT H measure start Ec/No THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATHThd2DRSCP Inter-RAT H measure start RSCP THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATHThd2FEcN0 Inter-RAT H measure stop Ec/No THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATHThd2FRSCP Inter-RAT H measure stop RSCP THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATMeasTime Inter-RAT measure timer length
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
InterRatNCellDetectSwitch Inter-Rat Neighboring Cell Detect Switch SET NCELLDETECTSWITCH(Optional) RNC
InterRATNCovHOCSThd Inter-RAT CS handover decision THD
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
InterRATNCovHOPSThd Inter-RAT PS handover decision THD
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
InterRATPeriodReportInterval Inter-RAT period report interval
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
InterRatPhyChFailNum Inter-RAT HO physical channel failure THD
ADD
CELLINTERRATHOCOV
(Optional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHOCOV(Optio
nal)
SET
INTERRATHONCOV(Opt
ional)
RNC
InterRATPingPongHyst Inter-RAT PingPong Hyst
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATPingPongTimer Inter-RAT PingPong timer
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATR99PsThd2DEcN0Inter-RAT R99 PS measure start Ec/No THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATR99PsThd2DRSCPInter-RAT R99 PS measure start RSCP THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATR99PsThd2FEcN0 Inter-RAT R99 PS measure stop Ec/No THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRATR99PsThd2FRSCPInter-RAT R99 PS measure stop RSCP THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
InterRatReportMode Inter-RAT report mode
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
InterRatTreselScalingFactor Inter-RAT scaling factor for reselection delay ADD CELLSELRESEL(Optional) RNC
InterRatUlMbdrTrigThreshold UL theshold ADD CELLMBDRINTERRAT(Optional) RNC
INTERVAL Send PKT Interval STR ETHOAMLOOPTST(Optional) RNC
IntraAblThdFor1FEcNo 1F event absolute EcNo threshold
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraAblThdFor1FRSCP 1F event absolute RSCP threshold
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraFreqFilterCoef Intra-freq meas L3 filter coeffADD CELLINTRAFREQHO(Optional) RNC
IntraFreqLdbPeriodTimerLenIntra-frequency LDB period timer length
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
RNC
IntraFreqMeasInd Intra-freq Meas Ctrl Info Ind ADD CELLMEAS(Optional)RNC
IntraFreqMeasQuantity Intra-freq Measure Quantity
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraFreqNCellDetectSwitch Intra-Frequency Neighboring Cell Detect Switch SET NCELLDETECTSWITCH(Optional) RNC
IntraRelThdFor1A 1A Event Relative ThresholdSET SMLC(Mandatory) RNC
IntraRelThdFor1ACSNVP CS non VP service 1A event relative THD
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraRelThdFor1ACSVP VP service 1A event relative THD
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraRelThdFor1APS PS service 1A event relative threshold
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraRelThdFor1B 1B Event Relative ThresholdSET SMLC(Mandatory) RNC
IntraRelThdFor1BCSNVP CS non VP service 1B event relative THD
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraRelThdFor1BCSVP VP service 1B event relative THD
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntraRelThdFor1BPS PS service 1B event relative threshold
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
IntrTmr TinTR SET IUTIMERANDNUM(Optional) RNC
IPADDR IP address LOP VCL(Mandatory) RNC
IPADDR Local IP address
ADD ETHIP(Mandatory)
ADD DEVIP(Mandatory)
ADD
IPOAPVC(Mandatory)
ACT VCLCC(Mandatory)
ADD
ETHTRKIP(Mandatory)
RNC
IPADDR Next Hop IP Address ADD VLANID(Mandatory) RNC
IPADDR Local IP address ADD IPPATH(Mandatory) RNC
IPHC Head compress ADD PPPLNK(Optional) RNC
IPHC Head compress ADD MPGRP(Optional) RNC
IPINDEX IP address index
ADD ETHIP(Mandatory)
ADD
ETHTRKIP(Mandatory) RNC
IPLOGPORTFLAG Whether Binding logical port or not ADD NODEBIP(Mandatory)RNC
IPLPN Logic port No. ADD NODEBIP(Mandatory)RNC
IPSN NodeB IP_TRANS Slot No. ADD NODEBIP(Mandatory)RNC
IPSRN NodeB IP_TRANS Subrack No. ADD NODEBIP(Mandatory)RNC
IPTRANSAPARTIND IP Trans Apart Ind ADD NODEB(Mandatory) RNC
IPTYPE IP address type
ADD ETHIP(Mandatory)
ADD
ETHTRKIP(Mandatory)
RNC
IsAccessClass0Barred Access class 0 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass10Barred Access class 10 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass11Barred Access class 11 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass12Barred Access class 12 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass13Barred Access class 13 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass14Barred Access class 14 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass15Barred Access class 15 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass1Barred Access class 1 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass2Barred Access class 2 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass3Barred Access class 3 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass4Barred Access class 4 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass5Barred Access class 5 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass6Barred Access class 6 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass7Barred Access class 7 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass8Barred Access class 8 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
IsAccessClass9Barred Access class 9 barred indicator ADD CELLACCESSSTRICT(Optional) RNC
ISCARRYMASTERFLG Carry port master flag or not ACT ETHOAMAH(Optional) RNC
ISFIRSTCLASS Is First Class Transport Resource Group ADD RSCGRP(Mandatory) RNC
IsFixedMachsWinSize Is MAC-hs window size fixed or not ADD NODEBLMTPARA(Optional) RNC
ISPRIMARYPLMN Primary Operator Flag ACT LICENSE(Optional) RNC
ISQOSPATH IS QOSPATH ACT IPPM(Mandatory) RNC
IsROOTNODE Is Root Node ADD ADJNODE(Mandatory) RNC
ITFT Interface Type
ADD
TRMMAP(Mandatory)
ADD
ADJMAP(Mandatory)
ADD IPPATH(Mandatory) RNC
IuAcIntervalOfCell AC Restriction Interval of Cell By IU SET ACALGO(Optional) RNC
IubDlOlcRelRabNum DL OLC released RAB number ADD NODEBOLC(Optional) RNC
IubUlOlcRelRabNum UL OLC released RAB number ADD NODEBOLC(Optional) RNC
IuCSRelNoRABTmr Iu CS Release protection timer SET STATETIMER(Optional) RNC
IuPSRelNoRABTmr Iu PS Release protection timer SET STATETIMER(Optional) RNC
IurCongCtrlSuppInd Congestion Control Indicator over IUR for NRNC ADD NRNC(Optional) RNC
IurExistInd IUR Interface Existing Indication ADD NRNC(Mandatory) RNC
IurHsdpaSuppInd Hsdpa cap ind over IUR for NRNC ADD NRNC(Optional) RNC
IurHsupaSuppInd Hsupa cap ind over IUR for NRNC ADD NRNC(Optional) RNC
IUSIGCONNID IU signalling Id RST IURESOURCE(Mandatory) RNC
IuStatePolicyForPool Iu State Policy For RncPool ADD RNCPOOL(Optional) RNC
J0RXT J0 expected incept type SET OPT(Optional) RNC
J0RXVALUE J0 expected incept value SET OPT(Optional) RNC
J0TXT J0 transmit type SET OPT(Optional) RNC
J0TXVALUE J0 transmit value SET OPT(Optional) RNC
J1RXT J1 expected incept type SET OPT(Optional) RNC
J1RXVALUE J1 expected incept value SET OPT(Optional) RNC
J1TXT J1 transmit type SET OPT(Optional) RNC
J1TXVALUE J1 transmit value SET OPT(Optional) RNC
J2RXT J2 hope incept type SET COPTLNK(Optional) RNC
J2RXVALUE J2 hope incept value SET COPTLNK(Optional) RNC
J2TXT J2 transmit type SET COPTLNK(Optional) RNC
J2TXVALUE J2 transmit value SET COPTLNK(Optional) RNC
K2MODE K2 Mode SET MSP(Optional) RNC
KEEPTMR Timer_Keep-Alive ADD SAALLNK(Optional) RNC
KEYCHK Key detect or not STR IPCHK(Mandatory) RNC
KpiAlarmChkTimes The Period of KPI Alarm Check SET KPIALMTHD(Optional) RNC
KpiAlarmSwitch RNC Report KPI Alarm Switch SET KPIALMTHD(Optional) RNC
LAC Location area code
ADD LAC(Mandatory)
ADD RAC(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD SAC(Mandatory)
ADD
NRNCCELL(Mandatory)
ADD
GSMCELL(Mandatory)
ADD CZ(Mandatory)
ADD
LASNAMAP(Mandatory)
RNC
LATITUDE GPS antenna latitude ADD GPS(Mandatory) RNC
LATITUDESEC GPS antenna latitude ADD GPS(Mandatory) RNC
LATPRD Delay measure period ADD IPLOGICPORT(Optional) RNC
LATSUSTM Delay adjust suspend period ADD IPLOGICPORT(Optional) RNC
LATTH Rate down threshold for delayADD IPLOGICPORT(Optional) RNC
LATUDK average delay down filter mantissa ADD IPLOGICPORT(Optional) RNC
LATUPK average delay up filter mantissa ADD IPLOGICPORT(Optional) RNC
LCARRYT Low bearing type ADD VPCLCX(Mandatory) RNC
LdbAvgFilterLen LDB smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
LdbDRDchoice Load balance DRD choice
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
LdbDRDLoadRemainThdDCH Dl load balance DRD power remain threshold for DCH
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
LdbDRDLoadRemainThdHSDPA Dl load balance DRD power remain threshold for HSDPA
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
LdbDRDOffsetDCH Load balance DRD offset for DCH SET DRD(Optional) RNC
LdbDRDOffsetHSDPA Load balance DRD offset for HSDPA SET DRD(Optional) RNC
LdbDRDSwitchDCH Load balance DRD switch for DCH
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
LdbDRDSwitchHSDPA Load balance DRD switch for HSDPA
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
LdbDRDTotalPwrProThd Load balance DRD total power protect threshold SET DRD(Optional) RNC
LdcSwitch load control algorithm switchSET LDCALGOPARA(Optional) RNC
LdrCodePriUseInd LDR code priority indicator ADD CELLLDR(Optional) RNC
LdrCodeUsedSpaceThd InterFreq HO code used ratio space threshold ADD CELLLDR(Optional) RNC
LdrFirstPri first priority for load reshuffling SET LDCALGOPARA(Optional) RNC
LdrFourthPri fourth priority for load reshuffling SET LDCALGOPARA(Optional) RNC
LdrPeriodTimerLen LDR period timer length
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
RNC
LdrSecondPri second priority for load reshuffling SET LDCALGOPARA(Optional) RNC
LdrThirdPri third priority for load reshuffling SET LDCALGOPARA(Optional) RNC
LEI Path Load EQ Threshold Table Index ADD LOADEQ(Mandatory) RNC
LEIBRZ Bronze user Load EQ index ADD ADJMAP(Mandatory) RNC
LEIGLD Gold user Load EQ index ADD ADJMAP(Mandatory) RNC
LEISLV Silver user Load EQ index ADD ADJMAP(Mandatory) RNC
LENO Local entity No.
ADD M3LE(Mandatory)
ADD M3DE(Mandatory)
RNC
LEVEL Alarm mask switch SET ALMML(Mandatory) RNC
LEVEL MD Level ADD ETHMD(Optional) RNC
LFRAATMLNKN Low FRAATM link No. ADD VPCLCX(Optional) RNC
LGCAPPTYPE Logic function type LOD PATCH(Optional) RNC
LGCAPPTYPE Logic function type ADD BRD(Optional) RNC
LGCAPPTYPE Logic function type SET OPT(Mandatory) RNC
LIMAGRPN Low IMA group No. ADD VPCLCX(Optional) RNC
LimitCMDlSFThd Dl SF threshold to limit CM SET CMCF(Mandatory) RNC
LittleRateThd Low Activity Bit Rate Threshold SET DCCC(Optional) RNC
LL Lower Limit SET ALMPORT(Optional) RNC
LNKCODE Line code SET E1T1(Optional) RNC
LNKN Link No.
SET E1T1LOP(Optional)
LOP E1T1(Optional)
STR E1T1TST(Optional)
SET E1T1(Optional)
SET
COPTLNK(Mandatory)
RNC
LNKREDFLAG Initial bearing traffic active tag ADD M3LNK(Optional) RNC
LNKSLSMASK Signalling link mask
ADD MTP3LKS(Optional)
ADD M3LKS(Optional) RNC
LNKT Frame Structure SET E1T1(Optional) RNC
LNKT Link type
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
RNC
LOCALIP Local IP address ADD PPPLNK(Mandatory) RNC
LOCALIP Local IP address ADD MPGRP(Mandatory) RNC
LOCALIP Local IP STR IPLOPTST(Mandatory)RNC
LoCell Local cell ID
ADD
LOCELL(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
RNC
LOCIP1 First local IP address ADD SCTPLNK(Mandatory)RNC
LOCIP2 Second local IP address ADD SCTPLNK(Optional) RNC
LOCPN Local SCTP port No. ADD SCTPLNK(Mandatory)RNC
LODCTRL Board start load control. SET LODCTRL(Mandatory)RNC
LOGPORTFLAG Logic Port Flag ADD SCTPLNK(Mandatory)RNC
LOGPORTNO Logic Port No. ADD SCTPLNK(Mandatory)RNC
LOGPORTSN Logic Port Slot No. ADD SCTPLNK(Mandatory)RNC
LONGITUDE GPS antenna longitude ADD GPS(Mandatory) RNC
LONGITUDESEC GPS antenna longitude ADD GPS(Mandatory) RNC
LOPT Loop type
SET
E1T1LOP(Mandatory)
SET OPTLOP(Mandatory)
RNC
LOSTSUSTM Lost adjust suspend period ADD IPLOGICPORT(Optional) RNC
LPN Low NCOPT port No. ADD VPCLCX(Optional) RNC
LPN Logic port No.
ADD
IPLOGICPORT(Mandatory
)
ADD IPPATH(Mandatory) RNC
LPN The Logical Port Number ADD ATMLOGICPORT(Optional) RNC
LPNSN IP Logic Port Slot No. ADD IPPATH(Mandatory) RNC
LPNTYPE Type of the logical port ADD ATMLOGICPORT(Mandatory) RNC
LS Link select SET E1T1(Optional) RNC
LS Link select SET COPTLNK(Mandatory)RNC
LSN Low slot No. ADD VPCLCX(Mandatory) RNC
LSRN Low bearing subrack No. ADD VPCLCX(Mandatory) RNC
LUNILNKN Low UNI link No. ADD VPCLCX(Optional) RNC
LVCI Low VCI ADD VPCLCX(Optional) RNC
LVPI Low VPI ADD VPCLCX(Mandatory) RNC
M3UASRVPN M3UA service listening port No. SET SCTPSRVPORT(Optional) RNC
MaccPageRepeatTimes Number of page re-TX SET DPUCFGDATA(Optional) RNC
MacDtxCycle MAC Transmission Cycle SET DTXDRXPARA(Optional) RNC
MacInactiveThreshold MAC Inactivity Threshold SET DTXDRXPARA(Optional) RNC
MacPduMaxSizeForEFach Cell_FACH L2 enhance max PDU size SET FRC(Optional) RNC
MacPduMaxSizeForL2Enhance Cell_DCH L2 enhance max PDU size SET FRC(Optional) RNC
MAIDX MA Index
ADD ETHMA(Mandatory)
ADD
ETHMEP(Mandatory)
ACT ETHCC(Mandatory)
PING MAC(Mandatory)
TRC MAC(Mandatory)
RNC
MAINLINK Main link type
ADD NCP(Optional)
ADD CCP(Optional) RNC
MANAME MA Name ADD ETHMA(Mandatory) RNC
MapSwitch Service mapping strategy switch SET CORRMALGOSWITCH(Optional) RNC
MASK SRNTI Mask RST IUR(Mandatory) RNC
MASK Subnet mask ADD DEVIP(Mandatory) RNC
MASK Subnet mask ADD PPPLNK(Mandatory) RNC
MASK Subnet mask ADD MPGRP(Mandatory) RNC
MASK Subnet mask ADD ETHIP(Mandatory) RNC
MASK Subnet mask ADD EMSIP(Mandatory) RNC
MASK Subnet mask ADD ETHTRKIP(Mandatory) RNC
MaxAllowedUlTxPower Max allowed UE UL TX power
ADD
CELLSELRESEL(Optional
)
ADD
NRNCCELL(Mandatory)
RNC
MaxAllowedUlTxPowerInd Max allowed UE UL TX power ind ADD NRNCCELL(Optional)RNC
MaxAntennaRange Cell Antenna Max Coverage ADD SMLCCELL(Optional)RNC
MaxAntennaRangeImp Cell Antenna Max Coverage ADD SMLCCELL(Optional)RNC
MAXASSOCRETR Association max retransfer ADD SCTPLNK(Optional) RNC
MaxAttNum Inter-Freq DRD max attempt times ADD CELLMBDRINTERFREQ(Optional) RNC
MaxAttNum Inter-RAT DRD max attempt times ADD CELLMBDRINTERRAT(Optional) RNC
MaxBitRate Max rate
ADD
TYPRABBASIC(Mandator
y)
ADD
CELLRLPWR(Mandatory) RNC
MAXBW Max bandwidth ADD IPLOGICPORT(Mandatory) RNC
MaxCAPSLowLoad Max capability normal load SET CTRLPLNSHAREPARA(Optional) RNC
MaxCAPSMidLoad Max capability middle load SET CTRLPLNSHAREPARA(Optional) RNC
MAXCC MaxCC ADD SAALLNK(Optional) RNC
MaxCellInActiveSet Max number of cell in active set
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
MaxCmchPi Max Common channel priority ADD FACH(Optional) RNC
MaxEcN0Value Maximum Ec/N0 Value SET RACHMEASUREPARA(Optional) RNC
MaxEdchCellInActiveSet Max number of cell in EDCH active set SET HOCOMM(Optional) RNC
MaxEdchRetransNum Maximum Number of E-DCH PDU retransfer ADD TYPRABOLPC(Mandatory) RNC
MaxEFachUserNum Maximum EFACH user number ADD CELLCAC(Optional) RNC
MaxFachPower Max transmit power of FACHADD FACH(Optional) RNC
MAXFRAMELEN Maximum Frame Length ADD IPPATH(Optional) RNC
MaxGpsSats Maximum Num Of GPS Satellites SET SMLC(Optional) RNC
MaxHsdpaUserNum Maximum HSDPA user number ADD CELLCAC(Optional) RNC
MaxHsupaUserNum Maximum HSUPA user number ADD CELLCAC(Optional) RNC
MaxMeasContInvalidTimes Max number of continuous invalid measurement
SET LDM(Optional)
SET SATLDM(Optional) RNC
MAXMFLEN PPP mux max mux-frame length
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
RNC
MaxNrOfUlDpchs Maximum codes of uplink DPDCH ADD NODEBLMTPARA(Optional) RNC
MAXNRP Max_NRP ADD SAALLNK(Optional) RNC
MAXPATHRETR Path max retransfer ADD SCTPLNK(Optional) RNC
MaxPCPICHPower Max transmit power of PCPICH ADD PCPICH(Optional) RNC
MAXPD Max Poll Data Count ADD SAALLNK(Optional) RNC
MaxQueueTimeLen Max queuing time length SET QUEUEPREEMPT(Optional) RNC
MAXSFLEN PPP mux max son-frame length
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
RNC
MaxTargetUlLoadFactor Maximum Target Uplink load Factor ADD CELLHSUPA(Optional) RNC
MAXTIME Maximum time for posave STR POSAVE(Optional) RNC
MaxTxPower Max transmit power of cell
ADD
CELLSETUP(Optional)
ADD
QUICKCELLSETUP(Optio
nal) RNC
MaxUlTxPowerforBac Max UL TX power of background service ADD CELLCAC(Optional) RNC
MaxUlTxPowerforConv Max UL TX power of conversational service ADD CELLCAC(Optional) RNC
MaxUlTxPowerforInt Max UL TX power of interactive service ADD CELLCAC(Optional) RNC
MaxUlTxPowerforStr Max UL TX power of streaming service ADD CELLCAC(Optional) RNC
MaxUserNumCodeAdj Max user number of code adjust ADD CELLLDR(Optional) RNC
MBDRFlag The flag of the MBDR
ADD
INTERFREQNCELL(Optio
nal)
ADD
GSMNCELL(Optional)
RNC
MBDRPrio The priority of MBDR neighbor cell
ADD
INTERFREQNCELL(Optio
nal)
ADD
GSMNCELL(Optional)
RNC
MBFDCHKN Check Check Index ADD IPRTBIND(Mandatory) RNC
MBFDLOCALIP Multi hop BFD detect local ipSTR IPCHK(Mandatory) RNC
MBFDSN Check Slot No. ADD IPRTBIND(Mandatory) RNC
MBFDSRN Check Subrack No. ADD IPRTBIND(Mandatory) RNC
MbmsAF AF of MBMS service SET ADMCTRL(Optional) RNC
MBMSCCHDL MBMS common channel service downlink factor ADD TRMFACTOR(Optional) RNC
MbmsChInd Mbms Channel Indicator ADD SCCPCHBASIC(Optional) RNC
MbmsDecPowerRabThd MBMS descend power rab threshold ADD CELLLDR(Optional) RNC
MbmsInactTmr Set mbms data check timer SET MBMSALARMPARA(Mandatory) RNC
MbmsIubSharingSwitch MBMS Iub Sharing switch SET MBMSSWITCH(Optional) RNC
MbmsMCC Mobile country code ADD MBMSALARMSERVICE(Mandatory) RNC
MbmsMNC Mobile network code ADD MBMSALARMSERVICE(Mandatory) RNC
MbmsNCellInd MBMS neighboring cell indicator ADD INTRAFREQNCELL(Optional) RNC
MbmsOlcRelNum MBMS services number released ADD CELLOLC(Optional) RNC
MbmsPreemptAlgoSwitch Mbms PreemptAlgoSwitch SET QUEUEPREEMPT(Optional) RNC
MbmsPtpUlBitRate Mbms Ptp UpLink Bit Rate SET RNCMBMSPARA(Optional) RNC
MbmsSaId MBMS SA ID
ADD
CELLMBMSSA(Mandator
y)
ADD
MBMSSA(Mandatory)
ADD
SAMBMSPARA(Mandator
y)
RNC
MbmsServiceId MBMS ServiceId ADD MBMSALARMSERVICE(Mandatory) RNC
MbmsSwitch MBMS Control Switch SET MBMSSWITCH(Mandatory) RNC
MBMSthroughput Max throughout of MBMS ACT LICENSE(Optional) RNC
MbmsTransMode Mbms Transfer Mode
ADD
CELLMBMSPARA(Option
al)
ADD
SAMBMSPARA(Optional)
SET
RNCMBMSPARA(Optiona
l)
RNC
MBS Max burst size ADD ATMTRF(Optional) RNC
MCC Mobile country code
ADD
CNOPERATOR(Mandator
y)
ADD
LASNAMAP(Mandatory)
ADD
IMSISNAMAP(Mandatory)
ADD
GSMCELL(Mandatory)
SET
MBMSPERF(Mandatory)
RNC
McchAccessPeriodCoef Mcch Access Period coefficient SET MCCHPERIODCOEF(Optional) RNC
McchModPeriodCoef Mcch Mod Period coefficientSET MCCHPERIODCOEF(Optional) RNC
McchRepPeriodCoef Mcch Repetition Period coefficient SET MCCHPERIODCOEF(Optional) RNC
MCCLASS MC PRI number ADD MPGRP(Optional) RNC
MCR Minimum cell rate ADD ATMTRF(Optional) RNC
MDIDX MD Index
ADD ETHMD(Mandatory)
ADD ETHMA(Mandatory)
RNC
MDNAME MD Name ADD ETHMD(Mandatory) RNC
MeasQuantityOf3A 3A Measure Quantity
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
MEPID MEP ID
ADD
ETHMEP(Mandatory)
ACT ETHCC(Mandatory) RNC
MEPSN MEP Slot No. ADD ETHMEP(Mandatory) RNC
MEPTYPE MEP Type ADD ETHMEP(Mandatory) RNC
MHF MP/MC list head option ADD MPGRP(Optional) RNC
MichId MICH ID ADD CELLMCCH(Mandatory) RNC
MichPower MICH Power ADD CELLMCCH(Optional) RNC
MichSttdInd MICH STTD Indicator ADD CELLMCCH(Optional) RNC
MINBW Min bandwidth ADD IPLOGICPORT(Mandatory) RNC
MinCmchPi Min Common channel priority ADD FACH(Optional) RNC
MinDlChCodeLen Minimum SF of downlink DPCH ADD NODEBLMTPARA(Optional) RNC
MinEcN0Value Minimum Ec/N0 Value SET RACHMEASUREPARA(Optional) RNC
MinForAmrE AMR Event E Reporting Period In Min
ADD
CELLQUALITYMEAS(M
andatory)
SET
QUALITYMEAS(Mandato
ry) RNC
MinForBeE BE Event E Reporting Period In Min
ADD
CELLQUALITYMEAS(M
andatory)
SET
QUALITYMEAS(Mandato
ry) RNC
MinForBeF BE Event F Reporting Period In Min
ADD
CELLQUALITYMEAS(M
andatory)
SET
QUALITYMEAS(Mandato
ry) RNC
MinForDlBasicMeas DL basic meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory)
RNC
MinForDlOlcMeas DL OLC meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
MinForHsdpaPrvidRateMeasHSDPA bit rate meas cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
MinForHsdpaPwrMeas HSDPA need pwr meas cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
MinForHsupaPrvidRateMeasHSUPA bit rate meas cycle SET LDM(Mandatory) RNC
MinForUlBasicMeas UL basic meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory)
RNC
MinForUlOlcMeas UL OLC meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
MinForVpE VP Event E Reporting Period In Min
ADD
CELLQUALITYMEAS(M
andatory)
SET
QUALITYMEAS(Mandato
ry) RNC
MINLNKNUM Min Number of Links Activated ADD IMAGRP(Optional) RNC
MinPCPICHPower Min transmit power of PCPICH ADD PCPICH(Optional) RNC
MINRXINT Min interval of BFD packet receive STR IPCHK(Optional) RNC
MINTXINT Min interval of BFD packet send STR IPCHK(Optional) RNC
MinUlChCodeLen Minimum SF of uplink DPDCH ADD NODEBLMTPARA(Optional) RNC
Mmax Max preamble loop ADD RACH(Optional) RNC
MNC Mobile network code
ADD
CNOPERATOR(Mandator
y)
ADD
GSMCELL(Mandatory)
ADD
LASNAMAP(Mandatory)
ADD
IMSISNAMAP(Mandatory)
SET
MBMSPERF(Mandatory)
RNC
MocnControlSwitch MOCN Control Switch SET OPERATORSHARINGMODE(Optional) RNC
MOCNSupport MOCN Support SET OPERATORSHARINGMODE(Optional) RNC
MODE Configure mode SET QUICKCFG(Mandatory) RNC
MODE Backup mode SET MSP(Optional) RNC
MODE System clock working mode SET CLKMODE(Mandatory)RNC
MODE Check mode STR IPCHK(Mandatory) RNC
MODE Signalling link mode ADD SCTPLNK(Mandatory)RNC
MODINDTMR AAL2 modifying indication timer SET AAL2TMR(Optional) RNC
MODREQTMR AAL2 modifying request timer SET AAL2TMR(Optional) RNC
MoniterPrd re-TX monitor period ADD TYPRABRLC(Optional) RNC
MoniTimeLen DCCC Rate Up Fail Monitor Time length SET DCCC(Optional) RNC
MPDHCPSVRIP MP Dhcp Server IP ADD NODEBESN(Mandatory) RNC
MPGRPN MLPPP Group No.
ADD MPGRP(Mandatory)
ADD MPLNK(Mandatory)
RNC
MPS Management proving status ADD SAALLNK(Optional) RNC
MPTYPE MLPPP type ADD MPGRP(Optional) RNC
MPUSLOT MPU Slot No. ADD BRD(Optional) RNC
MrIntraFreqPeriod MR Intra-freq Measurement period SET MRRNCCTRL(Optional) RNC
MRScopeCtrl Set ON or OFF SET MRSCOPECTRL(Mandatory) RNC
MrSwitch MR Switch SET MRRNCCTRL(Optional) RNC
MrTrafficType MR Trace Traffic Type SET MRRNCCTRL(Optional) RNC
MschSwitchForMtchMulti Msch Switch For MtchMulti Sccpch SET MBMSSWITCH(Optional) RNC
MschSwitchForNonMtchMulti Msch Switch For NonMtchMulti Sccpch SET MBMSSWITCH(Optional) RNC
MsgContent Msg Content ADD CELLCBSSAC(Mandatory) RNC
MsgInd Message Indicator ADD CELLCBSSAC(Optional) RNC
MSPCMD MSP Control Command SET MSPCMD(Mandatory) RNC
MtchMaxPwr MTCH maximal power ADD CELLCAC(Optional) RNC
MtchMaxSf MTCH maximal SF ADD CELLCAC(Optional) RNC
MtchMinPerc0 Mtch Minimal Power Percent for priority 0
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional) RNC
MtchMinPerc15 Mtch Minimal Power Percent for priority 15
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional) RNC
MtchMultiplexThd MTCH Multiplex Threshold SET RNCMBMSPARA(Optional) RNC
MtchRohcSwitch Mtch Rohc Switch SET MTCH(Optional) RNC
MtchRsvPwr MTCH reserve power ADD CELLCAC(Optional) RNC
MtchRsvSf MTCH reserve SF ADD CELLCAC(Optional) RNC
MTRLGY Metrology ADD SMLCCELL(Optional)RNC
MTRLGY MTRLGY ADD GPS(Optional) RNC
MTU MTU
SET ETHPORT(Optional)
ADD SCTPLNK(Optional)
RNC
MUXTIME PPP mux frame group out-time
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
RNC
MYDISCRIMINATOR My discriminator of BFD STR IPCHK(Optional) RNC
N1 N1 ADD SAALLNK(Optional) RNC
N300 Constant 300 SET IDLEMODETIMER(Optional) RNC
N302 Constant 302 SET CONNMODETIMER(Optional) RNC
N304 Constant 304 SET CONNMODETIMER(Optional) RNC
N308 Constant 308 SET CONNMODETIMER(Optional) RNC
N312 Constant 312
SET
CONNMODETIMER(Opti
onal)
SET
IDLEMODETIMER(Optio
nal) RNC
N313 Constant 313 SET CONNMODETIMER(Optional) RNC
N315 Constant 315 SET CONNMODETIMER(Optional) RNC
N381 Constant 381 SET CONNMODETIMER(Optional) RNC
NAME Signalling Route name
ADD
MTP3RT(Mandatory)
ADD
MTP3LKS(Mandatory)
ADD
ADJNODE(Mandatory)
ADD
MTP3LNK(Mandatory)
ADD M3DE(Mandatory)
ADD M3LE(Mandatory)
ADD M3LKS(Mandatory)
ADD M3LNK(Mandatory)
ADD M3RT(Mandatory)
ADD N7DPC(Mandatory)
ADD OPC(Mandatory)
RNC
NB01max Random back-off upper limitADD RACH(Optional) RNC
NB01min Random back-off lower limitADD RACH(Optional) RNC
NBAmrRrcNum AMR_RRC Number per Second for NodeB SET CALLSHOCKCTRL(Optional) RNC
NBAPSRVPN NBAP service listening port No. SET SCTPSRVPORT(Optional) RNC
NBATMOAMIP NodeB ATM_TRANS IP address ADD NODEBIP(Mandatory)RNC
NBATMOAMMASK NodeB ATM_TRANS IP Mask ADD NODEBIP(Mandatory)RNC
NBHighPriRrcNum HiPri_RRC Number per Second for NodeB SET CALLSHOCKCTRL(Optional) RNC
NBIPOAMIP NodeB IP_TRANS IP address ADD NODEBIP(Mandatory)RNC
NBIPOAMMASK NodeB IP_TRANS IP Mask ADD NODEBIP(Mandatory)RNC
NBLB1 The First Serial Number ADD NODEBESN(Mandatory) RNC
NBLB2 The Second Serial Number ADD NODEBESN(Mandatory) RNC
NBMCacAlgoSwitch Cell CAC algorithm switch ADD CELLALGOSWITCH(Optional) RNC
NBMDlCacAlgoSelSwitch Downlink CAC algorithm switch ADD CELLALGOSWITCH(Mandatory) RNC
NBMLdcAlgoSwitch Cell LDC algorithm switch ADD CELLALGOSWITCH(Optional) RNC
NbmLdcBHOUeSelSwitch BHO Select User algorithm switch ADD CELLALGOSWITCH(Optional) RNC
NBMMachsResetAlgoSelSwitch Mac-hs Reset algorithm switch ADD CELLALGOSWITCH(Optional) RNC
NBMUlCacAlgoSelSwitch Uplink CAC algorithm switchADD CELLALGOSWITCH(Mandatory) RNC
NbmWpsAlgorithmPriority Set WPS user priority SET WPSALGO(Optional) RNC
NbmWpsAlgorithmSwitch Set WPS Algorithm Switch SET WPSALGO(Optional) RNC
NBTotalRrcNumThd NodeB Call Shock Trigger Threshold SET CALLSHOCKCTRL(Optional) RNC
NBTRANTP NodeB TransType ADD NODEBIP(Mandatory)RNC
NCC Network color code ADD GSMCELL(Mandatory) RNC
NCellId Neighboring cell ID
ADD
INTERFREQNCELL(Man
datory)
ADD
INTRAFREQNCELL(Man
datory) RNC
NCellLdrRemainThd Cell Dynamic ShutDown Neighbour Cell Load Remain threshold ADD CELLDYNSHUTDOWN(Optional) RNC
NCellRncId RNC ID of a neighboring cell
ADD
INTRAFREQNCELL(Man
datory)
ADD
INTERFREQNCELL(Man
datory) RNC
NcMode Network Control Mode ADD GSMCELL(Optional) RNC
NCountingThd Counting Threshold
ADD
CELLMBMSPARA(Option
al)
ADD
SAMBMSPARA(Optional)
SET
RNCMBMSPARA(Optiona
l)
RNC
NcovHoOn2GldInd NCOV Reloc Ind based on GSM cell load SET INTERRATHONCOV(Optional) RNC
Ncrnonhcs Non-HCS NCR ADD CELLSELRESEL(Optional) RNC
NEIGHBOR Adjacent flag ADD N7DPC(Optional) RNC
NEXTHOP Forward route address ADD BAMIPRT(Mandatory)RNC
NEXTHOP Forward route address
ADD IPRT(Mandatory)
ADD
IPRTBIND(Mandatory)
RNC
NFastSpdEst Threshold for UE fast speed decision
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
RNC
NI Network ID ADD OPC(Mandatory) RNC
NInsyncInd Num of continuous in sync ind ADD CELLSETUP(Optional) RNC
NMO Network mode of operation ADD CNDOMAIN(Optional) RNC
NNSfTmr Timer NNSF SET OPERATORCFGPARA(Optional) RNC
NODEBCABN NodeB Cab No. STR NODEBBWRPT(Mandatory) RNC
NodeBHsdpaMaxUserNum NodeB Max HSDPA User Number ADD NODEBALGOPARA(Optional) RNC
NodeBHsupaMaxUserNum NodeB Max HSUPA User Number ADD NODEBALGOPARA(Optional) RNC
NodeBId NodeB ID
ADD NODEB(Mandatory)
ADD
ADJNODE(Mandatory)
SET
MRSCOPECTRL(Mandato
ry)
ADD
NODEBIP(Mandatory)
ADD
NODEBESN(Mandatory)
STR
NODEBDETECT(Mandato
ry)
RNC
NODEBIMAGRPN NodeB IMA group No. STR NODEBBWRPT(Mandatory) RNC
NodeBLdcAlgoSwitch NodeB LDC algorithm switchADD NODEBALGOPARA(Optional) RNC
NodeBName NodeB name
ADD NODEB(Mandatory)
ADD
NBNODESYNCMONPAR
A(Mandatory)
ADD
LOCELL(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
NODEBLDR(Mandatory)
ADD
NODEBALGOPARA(Man
datory)
ADD IPDL(Mandatory)
ADD NCP(Mandatory)
ADD CCP(Mandatory)
ADD
NODEBOLC(Mandatory)
STR
NODEBBWRPT(Mandator
y)
RNC
NodeBProtclVer NodeB Protocol version ADD NODEB(Optional) RNC
NODEBRPTPERIOD Report period STR NODEBBWRPT(Optional) RNC
NODEBRPTTYPE Report type STR NODEBBWRPT(Optional) RNC
NODEBSN NodeB Slot No. STR NODEBBWRPT(Mandatory) RNC
NODEBSRN NodeB Subrack No. STR NODEBBWRPT(Mandatory) RNC
NODEBSUBBRDTYPE NodeB Subboard type STR NODEBBWRPT(Mandatory) RNC
NodeBType NodeB Type ADD NODEB(Optional) RNC
NodeSyncPeriod Measurement period ADD NBNODESYNCMONPARA(Mandatory) RNC
NodeSyncTime Measurement start time ADD NBNODESYNCMONPARA(Mandatory) RNC
NODET Adjacent Node Type ADD ADJNODE(Mandatory) RNC
NodeType Small-scaled base station typeADD NODEBLMTPARA(Mandatory) RNC
NonhcsInd Non-HCS indicator ADD CELLSELRESEL(Optional) RNC
NonServToTotalEdchPwrRatio Target Non-serving E-DCH to Total E-DCH Power ratio ADD CELLHSUPA(Optional) RNC
NOutsyncInd Num of continuous out of sync ind ADD CELLSETUP(Optional) RNC
NPrio The priority of neighbor cell
ADD
INTERFREQNCELL(Man
datory)
ADD
GSMNCELL(Mandatory)
RNC
NPrio The priority of neighbor cell ADD INTRAFREQNCELL(Mandatory) RNC
NPrioFlag The flag of the priority
ADD
INTERFREQNCELL(Optio
nal)
ADD
INTRAFREQNCELL(Opti
onal)
ADD
GSMNCELL(Optional)
RNC
NPtpToPtmOffset Ptp To Ptm Offset
ADD
CELLMBMSPARA(Option
al)
ADD
SAMBMSPARA(Optional)
SET
RNCMBMSPARA(Optiona
l)
RNC
NRI Network resource identity ADD NRIGLBCNIDMAP(Mandatory) RNC
NRncId Neighboring RNC ID
ADD NRNC(Mandatory)
ADD
NRNCURA(Mandatory)
ADD
NRNCCELL(Mandatory)
ADD
RNCPOOLMEMBER(Man
datory)
RNC
NSAP Source ATM address ADD RNCBASIC(Mandatory) RNC
NSAP Destination ATM address
ADD
AAL2RT(Mandatory)
ADD NODEB(Mandatory)
RNC
NSlowSpdEst Threshold for UE slow speed decision
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
RNC
NullNRI NullNRI VALUE SET OPERATORCFGPARA(Optional) RNC
NumberOfACs Number of restrained Access Class every time
SET
DSACAUTOALGO(Mand
atory)
ADD
CELLDSACMANUALPA
RA(Mandatory)
RNC
OAMFLOWBW OAM flow minimum bandwidth
ADD PPPLNK(Optional)
SET ETHPORT(Optional)
ADD MPGRP(Optional)
ADD
IPLOGICPORT(Optional)
RNC
OAMFLOWDSCP DSCP of OAM flow SET QUEUEMAP(Mandatory) RNC
OAMMINBWKEY OAM flow min bandwidth switch SET QUEUEMAP(Optional)RNC
OffQoffset1Heavy Qoffset1 offset 2 ADD CELLPUC(Optional) RNC
OffQoffset1Light Qoffset1 offset 1 ADD CELLPUC(Optional) RNC
OffQoffset2Heavy Qoffset2 offset 2 ADD CELLPUC(Optional) RNC
OffQoffset2Light Qoffset2 offset 1 ADD CELLPUC(Optional) RNC
OffSinterHeavy Sintersearch offset 2 ADD CELLPUC(Optional) RNC
OffSinterLight Sintersearch offset 1 ADD CELLPUC(Optional) RNC
OlcPeriodTimerLen OLC period timer length
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
RNC
OperatorType Operator Type ADD CNOPERATOR(Mandatory) RNC
OppositeTrchType Opposite direction transport channel type ADD TYPRABRLC(Mandatory) RNC
OPTDS1MAPMODE Map mode of opt and DS1 SET COPTLNK(Optional) RNC
OptionalIESendSwitch Optional IE Send Switch SET SMLC(Optional) RNC
OPTM Optical interface standard SET OPT(Optional) RNC
OrientOfMajorAxis Cell Center Orientation Of Major Axis ADD SMLCCELL(Mandatory) RNC
OT Operation type LOD PATCH(Optional) RNC
OtdoaActivateFlag OTDOA Method Active FlagADD SMLCCELL(Optional)RNC
OTDOAMethodType OTDOA Method Type SET SMLC(Optional) RNC
OverLayMobilityFlag OverLay Network Mobility Flag ADD NRNCCELL(Optional)RNC
OWNERSHIP AAL2 Path ownership ADD AAL2PATH(Optional)RNC
OWNERSHIP Destination ATM address ownership ADD AAL2RT(Optional) RNC
PATHCHK IP Path check flag ADD IPPATH(Optional) RNC
PATHID AAL2 Path ID
ADD
AAL2PATH(Mandatory)
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
RNC
PATHID IP Path ID
ADD IPPATH(Mandatory)
ACT IPPM(Mandatory)
ADD
IPPATHBIND(Mandatory)
RNC
PATHT IP path type ADD IPPATH(Optional) RNC
PATTYPE Patch Type. LOD PATCH(Mandatory) RNC
PCHPower PCH power ADD PCH(Optional) RNC
PCPICHPower PCPICH transmit power
ADD PCPICH(Optional)
ADD
QUICKCELLSETUP(Optio
nal)
RNC
PCPICHPowerPace Pilot power adjustment step ADD CELLLDB(Optional) RNC
PCR Peak cell rate ADD ATMTRF(Optional) RNC
PcSwitch Power control switch SET CORRMALGOSWITCH(Optional) RNC
PDTMRVALUE PENDING timer ADD M3LKS(Optional) RNC
PDUPrid PDU Send Prid ACT ETHOAMAH(Optional) RNC
PDUSize PDU Pkt Len ACT ETHOAMAH(Optional) RNC
PeerCellId Peer Cell ID
ADD
QUICKCELLSETUP(Man
datory)
ADD
CELLSETUP(Mandatory) RNC
PEERIP Peer IP address ADD PPPLNK(Mandatory) RNC
PEERIP Peer IP address ADD MPGRP(Mandatory) RNC
PEERIP Peer IP STR IPLOPTST(Mandatory)RNC
PEERIP1 First destination IP address ADD SCTPLNK(Mandatory)RNC
PEERIP2 Second destination IP addressADD SCTPLNK(Optional) RNC
PEERIPADDR Peer IP address
ADD
IPOAPVC(Mandatory)
LOP VCL(Mandatory)
ACT VCLCC(Mandatory)
RNC
PEERIPADDR Peer IP address ADD IPPATH(Mandatory) RNC
PeerIsValid Peer Cell Is Valid Or Not
ADD
QUICKCELLSETUP(Optio
nal)
ADD
CELLSETUP(Optional) RNC
PEERMASK Peer subnet mask ADD IPPATH(Optional) RNC
PeerNodebId Peer NodeB ID ADD NODEB(Mandatory) RNC
PEERPN Destination SCTP port No. ADD SCTPLNK(Mandatory)RNC
PeerRncId Peer RNC ID ADD NODEB(Mandatory) RNC
PEERT Peer type ADD IPOAPVC(Mandatory)RNC
PenaltyTimeForPhyChFail Inter-Rat HO physical channel failure penalty timer
ADD
CELLINTERRATHOCOV
(Optional)
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHOCOV(Optio
nal)
SET
INTERRATHONCOV(Opt
ional)
RNC
PenaltyTimer Inter-RAT Penalty timer length ADD CELLMBDRINTERRAT(Optional) RNC
PendingTime4A Pending time after trigger 4AADD TYPRABDCCCMC(Optional) RNC
PendingTime4B Pending time after trigger 4BADD TYPRABDCCCMC(Optional) RNC
PendingTimeA Event A pending time after trigger ADD TYPRABRLC(Optional) RNC
PendingTimeB Event B pending time after trigger ADD TYPRABRLC(Optional) RNC
PERIOD Ping Check Period ADD IPPATH(Optional) RNC
PeriodFor2B 2B event retry period
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
PeriodFor2C 2C event retry period
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
RNC
PeriodFor3A 3A event retry period
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
PeriodFor3C 3C event retry period
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
PeriodMRReportNumfor1A 1A event to periodical rpt number
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional) RNC
PeriodMRReportNumfor1C 1C event to periodical rpt number
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional) RNC
PeriodMRReportNumfor1J 1J event to periodical rpt number
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional) RNC
PeriodProtectTimerCoeff Period common measure protect timer coeff
SET LDM(Optional)
SET SATLDM(Optional) RNC
PersistScalingFactor Persist Scaling Factor ADD PRACHASC(Mandatory) RNC
PFC Protocol field compress
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
RNC
PHB PHB ACT IPPM(Mandatory) RNC
PHB Per-Hop Behavior SET PHBMAP(Mandatory) RNC
PhyChId SCCPCH ID
ADD
SCCPCHBASIC(Mandator
y)
ADD PCCPCH(Optional)
ADD AICH(Optional)
ADD RACH(Optional)
ADD PCPICH(Optional)
ADD
SCCPCHTFC(Mandatory)
ADD PCH(Mandatory)
ADD
PRACHACTOASCMAP(O
ptional)
ADD
PRACHSLOTFORMAT(O
ptional)
ADD
PRACHASC(Optional)
ADD PICH(Mandatory)
ADD FACH(Mandatory)
ADD
PRACHTFC(Optional)
ADD
PRACHBASIC(Optional)
ADD PSCH(Optional)
ADD SSCH(Optional)
RNC
PhyChIdforMcch SCCPCH ID for MCCH ADD CELLMCCH(Mandatory) RNC
PICHId PICH ID ADD PICH(Optional) RNC
PICHMode PICH mode ADD PICH(Optional) RNC
PICHPowerOffset PICH power offset ADD CHPWROFFSET(Optional) RNC
PIUSN Piu Slot No. STR IPLOPTST(Mandatory)RNC
PKTCOUNT PKT Count STR ETHOAMLOOPTST(Optional) RNC
PKTLEN PKT Size STR ETHOAMLOOPTST(Optional) RNC
PKTMAXLEN Max Packet Length STR IPLOPTST(Optional) RNC
PKTSIZE Size of packet PING IP(Optional) RNC
PKTSIZE PKT Size PING MAC(Optional) RNC
PlmnValTagMax Max PLMN value tag
ADD LAC(Mandatory)
ADD RAC(Mandatory)
RNC
PlmnValTagMin Min PLMN value tag
ADD LAC(Mandatory)
ADD RAC(Mandatory)
RNC
PLPRD Packet lost measure period ADD IPLOGICPORT(Optional) RNC
PLTH Packet discard threshold ADD IPLOGICPORT(Optional) RNC
PMPRD IPPM packet send period ACT IPPM(Optional) RNC
PN Port No.
SET ETHPORT(Optional)
SET
MSPCMD(Mandatory)
CLR MSPREP(Optional)
SET OPTLOP(Mandatory)
SWP
ETHPORT(Mandatory)
SET MSP(Mandatory)
ACT MSP(Optional)
SET OPT(Optional)
SET
COPTLNK(Mandatory)
ACT
ETHPORT(Mandatory)
ADD
ETHREDPORT(Mandatory
)
ADD ETHIP(Mandatory)
ADD
IPLOGICPORT(Mandatory
)
ADD CCP(Mandatory)
RNC
PN Port No. SET SCUPORT(Optional) RNC
PN Port No. ACT ETHOAMAH(Mandatory) RNC
PN Port NO. ADD ETHMEP(Optional) RNC
PN Port No. STR ETHOAMLOOPTST(Mandatory) RNC
PN Port No. STR IPCHK(Mandatory) RNC
PN Port No. SET ALMPORT(Mandatory)RNC
POINTDESINFO Rollbackpoint Description ADD ROLLBACKPOINT(Optional) RNC
POINTNAME Rollbackpoint Name ADD ROLLBACKPOINT(Mandatory) RNC
PollTimerLen Poll timer length SET QUEUEPREEMPT(Optional) RNC
POLLTMR Timer_Poll ADD SAALLNK(Optional) RNC
Port Destination Port ADD FTPSCLTDPORT(Mandatory) RNC
PORTPROTYPE Port protocol type ADD PORTFLOWCTRLPARA(Mandatory) RNC
PORTTYPE Port Type ADD ETHMEP(Mandatory) RNC
POWER_RELAY1 Switch for Relay 1 ADD EMU(Optional) RNC
POWER_RELAY2 Switch for Relay 2 ADD EMU(Optional) RNC
POWER_RELAY3 Switch for Relay 3 ADD EMU(Optional) RNC
POWER_RELAY4 Switch for Relay 4 ADD EMU(Optional) RNC
POWER_RELAY5 Switch for Relay 5 ADD EMU(Optional) RNC
POWER_RELAY6 Switch for Relay 6 ADD EMU(Optional) RNC
PowerOffsetPpm Power offset ADD PRACHTFC(Mandatory) RNC
PowerRampStep Power increase step ADD PRACHBASIC(Optional) RNC
PPPDHCPSVRIP PPP Dhcp Server IP ADD NODEBESN(Mandatory) RNC
PPPLNK PPP link No. ADD IPLOGICPORT(Mandatory) RNC
PPPLNKN PPP link No.
ADD PPPLNK(Optional)
ADD MPLNK(Mandatory)
RNC
PPPMUX PPP mux
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
RNC
PQNUM Priority queue number ADD PORTFLOWCTRLPARA(Mandatory) RNC
PRACHPhyChId PRACH ID ADD AICH(Optional) RNC
PrdReportInterval Inter-frequency measure periodical rpt period
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
PreambleRetransMax Max preamble retransmissionADD PRACHBASIC(Optional) RNC
PreambleSignatures Preamble signatures ADD PRACHBASIC(Mandatory) RNC
PreemptAlgoSwitch Preempt algorithm switch SET QUEUEPREEMPT(Optional) RNC
PreemptRefArpSwitch PreemptRefArpSwitch SET QUEUEPREEMPT(Optional) RNC
Priority Block priority BLK CELL(Optional) RNC
PRIORITY Priority ADD IPRT(Mandatory) RNC
PRIORITY Signalling link priority
ADD
MTP3LNK(Optional)
ADD M3LNK(Optional)
RNC
PRIORITY Route priority
ADD MTP3RT(Optional)
ADD M3RT(Optional)
RNC
PriorityReference Integrate Priority Configured Reference SET USERPRIORITY(Optional) RNC
PriorityServiceForExtRab Service priority of Other service ADD SPG(Optional) RNC
PriorityServiceForHSDPA Service priority of HSDPA service ADD SPG(Optional) RNC
PriorityServiceForHSUPA Service priority of HSUPA service ADD SPG(Optional) RNC
PriorityServiceForR99NRT Service priority of R99 NRT service ADD SPG(Optional) RNC
PriorityServiceForR99RT Service priority of R99 RT service ADD SPG(Optional) RNC
ProcessDuration Processing duration ADD RNCALLCELLBLK(Mandatory) RNC
PROCESSSWITCH Process switch SET RRCTRLSWITCH(Mandatory) RNC
PROT SS7 protocol type ADD N7DPC(Optional) RNC
ProtectTmrForBac Background service T2 SET PSINACTTIMER(Optional) RNC
ProtectTmrForCon Conversational service T2 SET PSINACTTIMER(Optional) RNC
ProtectTmrForImsSig IMS signal T2 SET PSINACTTIMER(Optional) RNC
ProtectTmrForInt Interactive service T2 SET PSINACTTIMER(Optional) RNC
ProtectTmrForStr Streaming service T2 SET PSINACTTIMER(Optional) RNC
PS Port select SET OPT(Mandatory) RNC
PsBeProcType Handover Type for PS BE Traffic ADD NRNC(Optional) RNC
PSBKGDL R99 PS background service downlink factor ADD TRMFACTOR(Optional) RNC
PSBKGPRIPATH R99 PS background primary path ADD TRMMAP(Optional) RNC
PSBKGPRITH R99 PS background pri path load threshold ADD LOADEQ(Optional) RNC
PSBKGSECPATH R99 PS background secondary path ADD TRMMAP(Optional) RNC
PSBKGSECWHT R99 PS background pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
PSBKGUL R99 PS background service uplink factor ADD TRMFACTOR(Optional) RNC
PSCHPower PSCH transmit power ADD PSCH(Optional) RNC
PSCONVDL R99 PS conversational service downlink factor ADD TRMFACTOR(Optional) RNC
PSCONVPRIPATH R99 PS conversational primary path ADD TRMMAP(Optional) RNC
PSCONVPRITH R99 PS conversational pri path load threshold ADD LOADEQ(Optional) RNC
PSCONVSECPATH R99 PS conversational secondary path ADD TRMMAP(Optional) RNC
PSCONVSECWHT R99 PS conversational pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
PSCONVUL R99 PS conversational service uplink factor ADD TRMFACTOR(Optional) RNC
PScrambCode DL primary scrambling code
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
NRNCCELL(Mandatory)
RNC
PSHIGHINTERACTPRITH R99 PS high interactive pri path load threshold ADD LOADEQ(Optional) RNC
PSHIGHINTERACTSECWHT R99 PS high interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
PSHOOut2GloadThd PS domain Reloc GSM load THD
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
RNC
PsInactTmrForBac Background service T1 SET PSINACTTIMER(Optional) RNC
PsInactTmrForCon Conversational service T1 SET PSINACTTIMER(Optional) RNC
PSInactTmrForImsSig IMS signal T1 SET PSINACTTIMER(Optional) RNC
PsInactTmrForInt Interactive service T1 SET PSINACTTIMER(Optional) RNC
PsInactTmrForStr Streaming service T1 SET PSINACTTIMER(Optional) RNC
PsInfoUpdFlag PS Information Update Switch SET OPERATORCFGPARA(Optional) RNC
PsInfoUpdTmr PS Information Update Protection Timer SET OPERATORCFGPARA(Mandatory) RNC
PSINTERDL R99 PS interactive service downlink factor ADD TRMFACTOR(Optional) RNC
PSINTERUL R99 PS interactive service uplink factor ADD TRMFACTOR(Optional) RNC
PSINTHGHPRIPATH R99 PS high PRI interactive primary path ADD TRMMAP(Optional) RNC
PSINTHGHSECPATH R99 PS high PRI interactive secondary path ADD TRMMAP(Optional) RNC
PSINTLOWPRIPATH R99 PS low PRI interactive primary path ADD TRMMAP(Optional) RNC
PSINTLOWSECPATH R99 PS low PRI interactive secondary path ADD TRMMAP(Optional) RNC
PSINTMIDPRIPATH R99 PS middle PRI interactive primary path ADD TRMMAP(Optional) RNC
PSINTMIDSECPATH R99 PS middle PRI interactive secondary path ADD TRMMAP(Optional) RNC
PSLOWINTERACTPRITH R99 PS low interactive pri path load threshold ADD LOADEQ(Optional) RNC
PSLOWINTERACTSECWHT R99 PS low interactive pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
PSMIDINTERACTPRITH R99 PS mid interactive pri path load threshold ADD LOADEQ(Optional) RNC
PSMIDINTERACTSECWHTR99 PS mid pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
PsNriCfgMode Feature Supporting Mode of PS Domain SET OPERATORCFGPARA(Optional) RNC
PSNRILength Length of PS NRI in bits SET OPERATORCFGPARA(Mandatory) RNC
PsRabAbnormRelRatioThd PS call drop ratio Per Spu SET KPIALMTHD(Optional) RNC
PsRabEstAttMinNum The minimum of PS Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC
PsRabEstSuccRatioThd PS Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC
PsRabRelMinNum The number of PS drop Per Spu SET KPIALMTHD(Optional) RNC
PsRestriction Restriction for PS
SET
DSACAUTOALGO(Mand
atory)
ADD
CELLDSACMANUALPA
RA(Mandatory) RNC
PSServiceHOSwitch Inter-RAT PS handover switch ADD CELLHOCOMM(Optional) RNC
PSSTRMDL R99 PS streaming service downlink factor ADD TRMFACTOR(Optional) RNC
PSSTRMPRIPATH R99 PS streaming primary path ADD TRMMAP(Optional) RNC
PSSTRMPRITH R99 PS streaming pri path load threshold ADD LOADEQ(Optional) RNC
PSSTRMSECPATH R99 PS streaming secondary path ADD TRMMAP(Optional) RNC
PSSTRMSECWHT R99 PS streaming pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
PSSTRMUL R99 PS streaming service uplink factor ADD TRMFACTOR(Optional) RNC
PsSwitch PS rate negotiation switch SET CORRMALGOSWITCH(Optional) RNC
Psthroughput Max throughput of PS ACT LICENSE(Optional) RNC
PT Port Type SET ALMPORT(Mandatory)RNC
PTIP NodeB Interface IP Address ADD NODEBESN(Mandatory) RNC
PTIPMASK NodeB Interface IP Mask ADD NODEBESN(Mandatory) RNC
PtmNullStrmPasiSwitch Ptm Null Stream Passivity Switch SET RNCMBMSPARA(Optional) RNC
PtmPreemptSwitch Ptm Preempt Switch SET RNCMBMSPARA(Optional) RNC
PtmStrmPasiSwitch Ptm Stream Passivity Switch SET RNCMBMSPARA(Optional) RNC
PTYPE Port type SET ETHPORT(Mandatory) RNC
PucAvgFilterLen PUC smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
PucPeriodTimerLen PUC period timer length
SET
LDCPERIOD(Optional)
SET
SATLDCPERIOD(Optional
)
RNC
PunishTime Punish Time SET RNCMBMSPARA(Optional) RNC
PwrCtrlAlg Power control algorithm selection SET FRC(Optional) RNC
Q0MINDSCP Min DSCP of queue 0 SET QUEUEMAP(Optional)RNC
Q1MINDSCP Min DSCP of queue 1 SET QUEUEMAP(Optional)RNC
Q2MINDSCP Min DSCP of queue 2 SET QUEUEMAP(Optional)RNC
Q3MINDSCP Min DSCP of queue 3 SET QUEUEMAP(Optional)RNC
Q4MINDSCP Min DSCP of queue 4 SET QUEUEMAP(Optional)RNC
QAAL2VER Qaal2 Protocol Version ADD ADJNODE(Optional) RNC
Qhcs Quality threshold for HCS reselection
ADD CELLHCS(Optional)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Optional)
RNC
Qhyst1sfach Hysteresis 1for UE in CELL_FACH state ADD CELLSELRESEL(Optional) RNC
Qhyst1spch Hysteresis 1 for UE in CELL_PCH or URA_PCH state ADD CELLSELRESEL(Optional) RNC
Qhyst2sfach Hysteresis 2 for UE in CELL_FACH state ADD CELLSELRESEL(Optional) RNC
Qhyst2spch Hysteresis 2 for UE in CELL_PCH or URA_PCH state ADD CELLSELRESEL(Optional) RNC
Qoffset1sn Qoffset1sn ADD GSMNCELL(Optional)RNC
Qqualmin Min quality level
ADD
CELLSELRESEL(Optional
)
ADD
NRNCCELL(Mandatory)
RNC
QqualminInd Min quality level ind ADD NRNCCELL(Optional)RNC
Qrxlevmin Min RX level ADD GSMNCELL(Optional)RNC
Qrxlevmin Min Rx level
ADD
CELLSELRESEL(Optional
)
ADD
NRNCCELL(Mandatory)
RNC
QrxlevminExtSup Min Rx level Extend Support
ADD
CELLSELRESEL(Optional
)
ADD
NRNCCELL(Optional)
RNC
QrxlevminInd Min RX level ind ADD NRNCCELL(Optional)RNC
QualMeas Cell Sel-reselection quality measure ADD CELLSELRESEL(Optional) RNC
QueueAlgoSwitch Queue algorithm switch SET QUEUEPREEMPT(Optional) RNC
QueueLen Queue length SET QUEUEPREEMPT(Optional) RNC
RabIndex Service parameter index
ADD
TYPRABOLPC(Mandatory
)
ADD
TYPRABDCCCMC(Mand
atory)
ADD
TYPRABRLC(Mandatory)
ADD
TYPRABHSPA(Mandatory
)
ADD
TYPRABBASIC(Mandator
y)
ADD
TYPRABQUALITYMEAS
(Mandatory)
RNC
RabModifyTimerLen Rab Modify Timer Length SET COIFTIMER(Optional) RNC
RAC Routing area code
ADD RAC(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD
GSMCELL(Mandatory)
ADD
NRNCCELL(Mandatory)
RNC
RACHSubChNo RACH sub channel no. ADD PRACHBASIC(Mandatory) RNC
RafcTmr Trafc SET IUTIMERANDNUM(Optional) RNC
RANSharingSupport RAN Sharing Support SET OPERATORSHARINGMODE(Optional) RNC
RatCellType Inter-RAT cell type ADD GSMCELL(Mandatory) RNC
RatcTmr Tratc SET IUTIMERANDNUM(Optional) RNC
RateMatchingAttr Rate matching attribute
ADD FACH(Optional)
ADD RACH(Optional)
ADD PCH(Optional) RNC
RateRecoverTimerLen DL TF rate recover timer length ADD CELLOLC(Optional) RNC
RateRstrctCoef DL TF rate restrict coefficient ADD CELLOLC(Optional) RNC
RateRstrctTimerLen DL TF rate restrict timer length ADD CELLOLC(Optional) RNC
RBPNAME name of rollback point
BEG
FORWARD(Mandatory)
BEG
ROLLBACK(Mandatory) RNC
RBPTYPE type of rollback point BEG FORWARD(Mandatory) RNC
RbRecfgRspTmr Wait RB reconfiguration response timer SET STATETIMER(Optional) RNC
RbRelRspTmr Wait RB release response timer SET STATETIMER(Optional) RNC
RbSetupRspTmr Wait RB setup response timerSET STATETIMER(Optional) RNC
RDC Rate down coefficient ADD IPLOGICPORT(Optional) RNC
RecountingPeriod Recounting Period SET RNCMBMSPARA(Optional) RNC
RecoverCoef DL TF rate recover coefficient ADD CELLOLC(Optional) RNC
RECOVERTHD Decrease rate alarm recover threshold ADD IPLOGICPORT(Optional) RNC
RED Backup ADD BRD(Mandatory) RNC
ReDirBandInd ReDirection target band indicator
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
RNC
RedirFactorOfLDR Redirection Factor Of LDR
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
RNC
RedirFactorOfNorm Redirection Factor Of Normal
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
RNC
RedirSwitch Redirection Switch
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal) RNC
ReDirUARFCNDownlink Redirection target downlink UARFCN
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
RNC
ReDirUARFCNUplink Redirection target uplink UARFCN
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
RNC
ReDirUARFCNUplinkInd Redirection target UL frequency configuration ind
SET DRD(Optional)
ADD
CELLDRD(Optional)
SET
REDIRECTION(Optional)
ADD
CELLREDIRECTION(Opti
onal)
RNC
REF2MCLKSRC Clock source of output clock SET CLK(Optional) RNC
REF2MCLKSRCBAK Backup clock source of output clock SET CLK(Optional) RNC
REF2MCLKSW1 Output switch of 2M output clock 1 SET CLK(Optional) RNC
REF2MCLKSW2 Output switch of 2M output clock 2 SET CLK(Optional) RNC
RegByFachSwitch Register Bear by Fach SwitchSET CALLSHOCKCTRL(Optional) RNC
ReHostPolicy Re-host Policy Type SET POOLPRIMHOSTPOLICY(Optional) RNC
RELINDTMR Release indication timer SET AAL2TMR(Optional) RNC
RelocAnotherTmr Relocation another request timer SET STATETIMER(Optional) RNC
RelocCmdTmr Relocation Command timer SET STATETIMER(Optional) RNC
RelocCommitTmr Relocation commit timer SET STATETIMER(Optional) RNC
RelocDataFwdTmr Relocation data forwarding timer SET STATETIMER(Optional) RNC
RelocFailIuRelCmdTmr Relocation failed Iu release command timer SET STATETIMER(Optional) RNC
RelocIuRelCmdTmr Relocation Iu release command timer SET STATETIMER(Optional) RNC
RelocMobilConfTmr Relocation mobile info confirmation timer SET STATETIMER(Optional) RNC
RelocPhychRecfgTmr Relocation PhyCh reconfiguration timer SET STATETIMER(Optional) RNC
RelocUtranHoCmpTmr Relocation Inter-RAT HO completion timer SET STATETIMER(Optional) RNC
RELREQTMR Release request timer SET AAL2TMR(Optional) RNC
RelThdForDwnGrd Relative threshold of SHO failure SET INTRAFREQHO(Optional) RNC
REMARK Route use description
ADD IPRT(Optional)
ADD ATMTRF(Optional)
RNC
REMARK Use description
ADD
LOADEQ(Mandatory)
ADD TRMMAP(Optional)
ADD
TRMFACTOR(Mandatory) RNC
RepeatNum Repeat Number SET RNCCBPARA(Optional) RNC
RepeatPeriod Repeat Period SET RNCCBPARA(Optional) RNC
ReportIntervalfor1A 1A event to periodical rpt period
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional) RNC
ReportIntervalfor1C 1C event to periodical rpt period
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional) RNC
ReportIntervalfor1J 1J event to periodical rpt period
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional) RNC
Req2GCap Required 2G Capability ADD TYPRABBASIC(Mandatory) RNC
ReservedSwitch0 CORRM Algo reserved switch 0 SET CORRMALGOSWITCH(Optional) RNC
ReservedSwitch1 CORRM Algo reserved switch 1 SET CORRMALGOSWITCH(Optional) RNC
ReservedU32Para0 CORRM Algo reserved U32 Para 0 SET CORRMALGOSWITCH(Optional) RNC
ReservedU32Para1 CORRM Algo reserved U32 Para 1 SET CORRMALGOSWITCH(Optional) RNC
ReservedU8Para0 CORRM Algo reserved U8 Para 0 SET CORRMALGOSWITCH(Optional) RNC
ReservedU8Para1 CORRM Algo reserved U8 Para 1 SET CORRMALGOSWITCH(Optional) RNC
RESREQTMR Reset request timer SET AAL2TMR(Optional) RNC
RESTARTTMR son-protocol confer out time
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
RNC
RestrictionType Restriction Type ADD CELLDSACMANUALPARA(Mandatory) RNC
ReTransRatioFilterCoef re-TX measure filter coef ADD TYPRABRLC(Optional) RNC
RetryCapability BIT MAP of retry HSPA PLUS character SET FRC(Optional) RNC
RlcMode RLC mode selection ADD TYPRABRLC(Mandatory) RNC
RLCSize RLC size
ADD
FACHDYNTFS(Mandatory
)
ADD
PCHDYNTFS(Mandatory)
ADD
RACHDYNTFS(Mandator
y)
RNC
RlMaxDlPwr RL Max DL TX power ADD CELLRLPWR(Mandatory) RNC
RlMinDlPwr RL Min DL TX power ADD CELLRLPWR(Mandatory) RNC
RlRecfgReadyTmr RL reconfiguration timer SET STATETIMER(Optional) RNC
RlRelRspTmr RL release timer SET STATETIMER(Optional) RNC
RlRstrTmr RL restoration timer SET STATETIMER(Optional) RNC
RlSetupRspTmr RL setup response timer SET STATETIMER(Optional) RNC
RNCId RNC ID
ADD
CELLINTRAFREQHO(Ma
ndatory)
ADD
INTRAFREQNCELL(Man
datory)
ADD
INTERFREQNCELL(Man
datory)
ADD
GSMNCELL(Mandatory)
ADD
SMLCCELL(Mandatory)
RST IUR(Mandatory)
ADD
RNCBASIC(Mandatory)
ADD GPS(Mandatory)
RST RNC(Mandatory)
RNC
RNCIPADDR CBS RNC IP address ADD CBSADDR(Mandatory) RNC
RncPoolIndex RncPool Index ADD RNCPOOL(Mandatory) ADD RNCPOOLMEMBER(Mandatory) RNC
RncPoolName RncPool Name ADD RNCPOOL(Mandatory) RNC
RncProtclVer RNC protocol version ADD NRNC(Mandatory) RNC
RPTTHD Decrease rate alarm report threshold ADD IPLOGICPORT(Optional) RNC
RrcCause Cause of RRC connection establishment SET RRCESTCAUSE(Mandatory) RNC
RrcConnEstabAttMinNum The minimum of Rrc connection request Per Spu SET KPIALMTHD(Optional) RNC
RrcConnEstabSuccRatioThd Rrc connection successful ratio Per Spu SET KPIALMTHD(Optional) RNC
RrcConnRejWaitTmr Wait Time In RRC Connection Reject Message SET STATETIMER(Optional) RNC
RrcInitDtTmr RRC initial DT timer SET STATETIMER(Optional) RNC
RrcIuRelCmdTmr RRC Iu release command timer SET STATETIMER(Optional) RNC
RrcPaingType1Tmr RRC paging type 1 response timer SET STATETIMER(Optional) RNC
RrcRelRetranTmr RRC release retransmission timer SET STATETIMER(Optional) RNC
RrcRlcAckCmpTmr RRC RLC completion acknowledgement timer SET STATETIMER(Optional) RNC
RrcSecrtModeCmpTmr RRC security mode completion timer SET STATETIMER(Optional) RNC
RrcUeRspTmr RRC UE response timer SET STATETIMER(Optional) RNC
RSCGRPFLAG Add To Rscgrp Flag ADD AAL2PATH(Mandatory) RNC
RSCGRPN Rscgrp No. ADD AAL2PATH(Mandatory) RNC
RSCGRPN Rscgrp No. ADD IPPATH(Mandatory) RNC
RscMngMode Resource Management ModeADD NODEB(Optional) RNC
RSCMNGMODE Resource management mode
ADD
IPLOGICPORT(Mandatory
)
ADD
RSCGRP(Mandatory)
ADD
ATMLOGICPORT(Option
al)
RNC
RSNDES Lock Reason LCK CMCTRL(Mandatory) RNC
RSPTMR Timer_No-Response ADD SAALLNK(Optional) RNC
RSTCNTYPE CN Type by Reset RST IU(Mandatory) RNC
RSTFUN Restart switch ADD OPC(Optional) RNC
RstRsndNum Times of resending reset message to CN SET IUTIMERANDNUM(Optional) RNC
RSTTYPE Reset Type RST IUR(Mandatory) RNC
RsvdPara1 Reserved parameter 1 SET RRCTRLSWITCH(Optional) RNC
RsvdPara1 Reserved parameter 1 ADD NRNC(Optional) RNC
RsvdPara1 Reserved parameter 1 ADD CNNODE(Optional) RNC
RSVDPARA1 Reserved Parameter 1 SET DEVPATCHPARA(Optional) RNC
RsvdPara1 Reserved parameter 1
ADD
CELLALGOSWITCH(Opti
onal)
ADD
NODEBALGOPARA(Opti
onal)
SET
CACALGOSWITCH(Optio
nal)
RNC
RsvdPara1 Reserved Parameter1 SET DPUCFGDATA(Optional) RNC
RSVDPARA10 Reserved Parameter 10 SET DEVPATCHPARA(Optional) RNC
RsvdPara10 Reserved Parameter10 SET DPUCFGDATA(Optional) RNC
RsvdPara11 Reserved Parameter11 SET DPUCFGDATA(Optional) RNC
RsvdPara12 Reserved Parameter12 SET DPUCFGDATA(Optional) RNC
RsvdPara13 Reserved Parameter13 SET DPUCFGDATA(Optional) RNC
RsvdPara14 Reserved Parameter14 SET DPUCFGDATA(Optional) RNC
RsvdPara15 Reserved Parameter15 SET DPUCFGDATA(Optional) RNC
RsvdPara16 Reserved Parameter16 SET DPUCFGDATA(Optional) RNC
RsvdPara2 Reserved parameter 2 ADD NRNC(Optional) RNC
RsvdPara2 Reserved parameter 2 ADD CNNODE(Optional) RNC
RSVDPARA2 Reserved Parameter 2 SET DEVPATCHPARA(Optional) RNC
RsvdPara2 Reserved parameter 2
ADD
CELLALGOSWITCH(Opti
onal)
ADD
NODEBALGOPARA(Opti
onal)
SET
CACALGOSWITCH(Optio
nal)
RNC
RsvdPara2 Reserved Parameter2 SET DPUCFGDATA(Optional) RNC
RSVDPARA3 Reserved Parameter 3 SET DEVPATCHPARA(Optional) RNC
RsvdPara3 Reserved parameter 3
ADD
CELLALGOSWITCH(Opti
onal)
ADD
NODEBALGOPARA(Opti
onal)
SET
CACALGOSWITCH(Optio
nal)
RNC
RsvdPara3 Reserved Parameter3 SET DPUCFGDATA(Optional) RNC
RSVDPARA4 Reserved Parameter 4 SET DEVPATCHPARA(Optional) RNC
RsvdPara4 Reserved Parameter4 SET DPUCFGDATA(Optional) RNC
RSVDPARA5 Reserved Parameter 5 SET DEVPATCHPARA(Optional) RNC
RsvdPara5 Reserved Parameter5 SET DPUCFGDATA(Optional) RNC
RSVDPARA6 Reserved Parameter 6 SET DEVPATCHPARA(Optional) RNC
RsvdPara6 Reserved Parameter6 SET DPUCFGDATA(Optional) RNC
RSVDPARA7 Reserved Parameter 7 SET DEVPATCHPARA(Optional) RNC
RsvdPara7 Reserved Parameter7 SET DPUCFGDATA(Optional) RNC
RSVDPARA8 Reserved Parameter 8 SET DEVPATCHPARA(Optional) RNC
RsvdPara8 Reserved Parameter8 SET DPUCFGDATA(Optional) RNC
RSVDPARA9 Reserved Parameter 9 SET DEVPATCHPARA(Optional) RNC
RsvdPara9 Reserved Parameter9 SET DPUCFGDATA(Optional) RNC
RT Revertive type SET MSP(Optional) RNC
RTCONTEXT Routing Context
ADD M3LE(Optional)
ADD M3DE(Optional) RNC
RTCPBWRatio RATE OF RTCP BANDWIDTH ADD CNNODE(Optional) RNC
RtCpc2EFachStateTransTimer Realtime CPC to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
RtCpc2FStateTransTimer Realtime CPC to FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
RTCPSwitch RTCP SWITCH ADD CNNODE(Optional) RNC
RTDEST Destination network address ADD BAMIPRT(Mandatory)RNC
RTDESTMASK Destination address mask ADD BAMIPRT(Mandatory)RNC
RtDH2EFachStateTransTimer Realtime DCH or HSPA to E_FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
RtDH2FStateTransTimer Realtime DCH or HSPA To FACH Transition Timer SET UESTATETRANSTIMER(Optional) RNC
RtDH2FTvmPTAT RT D/HSPA2F 4B Pending Time SET UESTATETRANS(Optional) RNC
RtDH2FTvmThd RT D/HSPA2F 4B ThresholdSET UESTATETRANS(Optional) RNC
RtDH2FTvmTimeToTrig RT D/HSPA2F 4B Time SET UESTATETRANS(Optional) RNC
RtEFach2CpcTvmThd RT E_FACH2CPC_HSPA 4A Threshold SET UESTATETRANS(Optional) RNC
RtEFach2CpcTvmTimeToTrig RT E_FACH2CPC_HSPA 4A Time SET UESTATETRANS(Optional) RNC
RtEFach2DHTvmThd RT E_FACH2D/HSPA 4A Threshold SET UESTATETRANS(Optional) RNC
RtEFach2DHTvmTimeToTrig RT E_FACH2D/HSPA 4A Time SET UESTATETRANS(Optional) RNC
RtF2CpcTvmThd RT F2CPC_HSPA 4A Threshold SET UESTATETRANS(Optional) RNC
RtF2CpcTvmTimeToTrig RT F2CPC_HSPA 4A Time SET UESTATETRANS(Optional) RNC
RtF2DHTvmThd RT F2D/HSPA 4A ThresholdSET UESTATETRANS(Optional) RNC
RtF2DHTvmTimeToTrig RT F2D/HSPA 4A Time SET UESTATETRANS(Optional) RNC
RTOALPHA RTO alpha value ADD SCTPLNK(Optional) RNC
RTOBETA RTO beta value ADD SCTPLNK(Optional) RNC
RTOINIT RTO initial value ADD SCTPLNK(Optional) RNC
RTOMAX RTO max value ADD SCTPLNK(Optional) RNC
RTOMIN RTO min value ADD SCTPLNK(Optional) RNC
RTX Route index ADD AAL2RT(Optional) RNC
RUS Rate up step ADD IPLOGICPORT(Optional) RNC
RUSPRD Rate up step adjust period ADD IPLOGICPORT(Optional) RNC
RXBW Backward bandwidth ADD ATMLOGICPORT(Mandatory) RNC
RXBW Backward bandwidth ADD IPPATH(Mandatory) RNC
RxBw Backward Bandwidth ADD RSCGRP(Mandatory) RNC
RXTRFX RX traffic record index
ADD
SAALLNK(Mandatory)
ADD
AAL2PATH(Mandatory)
ADD
VPCLCX(Mandatory)
ADD IPOAPVC(Optional)
RNC
RxTxtoTrig6F 6F event trigger threshold SET HOCOMM(Optional) RNC
RxTxtoTrig6G 6G event trigger threshold SET HOCOMM(Optional) RNC
SAALLNKN SAAL link No. ADD CCP(Mandatory) RNC
SAALLNKN SAAL link No. ADD NCP(Mandatory) RNC
SAALLNKN SAAL link No.
ACT VCLCC(Mandatory)
LOP VCL(Mandatory)
RNC
SAALLNKN Saal Link No.
ADD
ADJNODE(Mandatory)
ADD
MTP3LNK(Mandatory)
RNC
SAALLNKT Interface type ADD SAALLNK(Mandatory) RNC
SAALTMR SAAL link connection timer SET MTP3TMR(Optional) RNC
SAC Service area code
ADD SAC(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory)
ADD CZ(Mandatory)
RNC
SATELLITEIND Satellite Trans Ind ADD NODEB(Optional) RNC
SCCPCHOffset SCCPCH offset ADD SCCPCHBASIC(Optional) RNC
ScopeType Scope Type SET MRSCOPECTRL(Mandatory) RNC
SCR Sustainable cell rate ADD ATMTRF(Optional) RNC
ScrambCode Scrambling code ADD SCCPCHBASIC(Mandatory) RNC
SCRAMBLESW Scramble Switch
SET E1T1(Optional)
SET OPT(Optional)
RNC
SCTPLNKN SCTP link No.
ADD
SCTPLNK(Mandatory)
ADD M3LNK(Mandatory)
ADD CCP(Mandatory)
ADD NCP(Mandatory)
RNC
SDAY Start date SET TZ(Mandatory) RNC
SDENABLE SD Enable SET MSP(Optional) RNC
SDSFPRI SDSF Priority SET MSP(Optional) RNC
Seed Seed of the pseudo-random sequence generator ADD IPDL(Mandatory) RNC
SelectType Detect type STR NODEBDETECT(Optional) RNC
SeqOfUserRel Sequence of user release ADD CELLOLC(Optional) RNC
ServerIP FTP Server IP Address ADD FTPSCLTDPORT(Mandatory) RNC
SERVERNAME Server name ADD PPPLNK(Mandatory) RNC
ServiceBitRate Service Bit Rate
ADD
CELLMBMSSCCPCH(Ma
ndatory)
SET
MBMSSCCPCH(Mandator
y)
ADD
CELLMBMSFACH(Manda
tory)
SET
MBMSFACH(Mandatory)
SET MTCH(Mandatory)
RNC
ServiceDiffDrdSwitch Service differential drd switch
SET DRD(Optional)
ADD
CELLDRD(Optional)
RNC
ServiceId Service ID SET MBMSPERF(Mandatory) RNC
ServiceInd CN domain indication ADD NRNC(Mandatory) RNC
ServiceType Service Type
ADD
CELLMBMSSCCPCH(Ma
ndatory)
SET
MBMSSCCPCH(Mandator
y)
ADD
CELLMBMSFACH(Manda
tory)
SET
MBMSFACH(Mandatory)
SET MTCH(Mandatory)
RNC
SGSNFLG SGSN FLAG ADD ADJNODE(Mandatory) RNC
SharingOutCAPSMidLoad Sharing out capability middle load SET CTRLPLNSHAREPARA(Optional) RNC
SharingType Sharing Type Of NodeB ADD NODEB(Mandatory) RNC
SHCSRat HCS inter-rat reselection threshold ADD CELLHCS(Optional) RNC
SHInd Service Handover Indicator ADD TYPRABBASIC(Mandatory) RNC
ShoFailNumForDwnGrd Threshold number of SHO failure SET INTRAFREQHO(Optional) RNC
ShoFailPeriod Max evaluation period of SHO failure SET INTRAFREQHO(Optional) RNC
SHOQualmin Min quality THD for SHO
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
SET SMLC(Mandatory)
RNC
SHOTRIG SHO cross IUR trigger ADD NRNC(Mandatory) RNC
SIB11Ind SIB11 Indicator
ADD
INTRAFREQNCELL(Opti
onal)
ADD
INTERFREQNCELL(Optio
nal)
ADD
GSMNCELL(Optional)
RNC
SIB12Ind SIB12 Indicator
ADD
INTRAFREQNCELL(Opti
onal)
ADD
INTERFREQNCELL(Optio
nal)
ADD
GSMNCELL(Optional)
RNC
SibCfgBitMap SIB switch ADD CELLSIBSWITCH(Optional) RNC
SigChType channel type for RRC establishment SET RRCESTCAUSE(Optional) RNC
SIGLKSX Signalling linkset index
ADD
MTP3LKS(Mandatory)
ADD
MTP3LNK(Mandatory)
ADD
MTP3RT(Mandatory)
ADD M3RT(Mandatory)
ADD M3LKS(Mandatory)
ADD M3LNK(Mandatory)
RNC
SIGLNKID Signalling link ID ADD M3LNK(Mandatory) RNC
SigRbInd Bearing signal indication ADD FACH(Optional) RNC
SIGSLC Signalling link code ADD MTP3LNK(Mandatory) RNC
SilverMaxMode Max Mode Of Wideband AMRC For Silver Users
ADD
CELLAMRCWB(Optional)
SET AMRCWB(Optional)
RNC
SilverMaxMode Max Mode Of Narrowband AMRC For Silver Users
ADD
CELLAMRC(Optional)
SET AMRC(Optional)
RNC
SingalDlMBR Downlink maximum bit rate of Signal SET USERMBR(Optional) RNC
SingalUlMBR Uplink maximum bit rate of Signal SET USERMBR(Optional) RNC
SIPADDR Source IP address PING IP(Mandatory) RNC
SIPDL IMS SRB service downlink factor ADD TRMFACTOR(Optional) RNC
SIPPRIPATH IMS SRB primary path ADD TRMMAP(Optional) RNC
SIPPRITH IMS Signal pri path load threshold ADD LOADEQ(Optional) RNC
SIPSECPATH IMS SRB secondary path ADD TRMMAP(Optional) RNC
SIPSECWHT IMS Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
SIPUL IMS SRB service uplink factor ADD TRMFACTOR(Optional) RNC
SlimitSearchRat HCS search inter-rat limit threshold ADD CELLHCS(Optional) RNC
SlotFormat Slot format ADD SCCPCHBASIC(Mandatory) RNC
SlotFormat1 Slot format 1 ADD PRACHSLOTFORMAT(Optional) RNC
SlotFormat2 Slot format 2 ADD PRACHSLOTFORMAT(Optional) RNC
SlotFormat3 Slot format 3 ADD PRACHSLOTFORMAT(Optional) RNC
SlotFormat4 Slot format 4 ADD PRACHSLOTFORMAT(Optional) RNC
SlotFormatNum Number of PRACH slot formats ADD PRACHSLOTFORMAT(Mandatory) RNC
SLSMASK Signalling route mask ADD N7DPC(Optional) RNC
SM StartType SET TZ(Mandatory) RNC
SmlcMethod UE Positioning Method SET SMLC(Optional) RNC
SMOKE_MASK Enable Smoke Alarm Reporting ADD EMU(Optional) RNC
SMONTH Start month SET TZ(Mandatory) RNC
SN Slot No.
ADD
CBSADDR(Mandatory)
SET
NCELLDETECTSWITCH(
Mandatory)
ADD
IURCOMMSCCP(Mandato
ry)
ADD NODEB(Mandatory)
RNC
SN Slot No. SET MRSCOPECTRL(Mandatory) RNC
SN Slot No. ACT CRC(Optional) RNC
SN Slot No. ADD RNCCBCPUID(Mandatory) RNC
SN Slot No. SWP BRD(Mandatory) RNC
SN Slot No. LOP VCL(Mandatory) RNC
SN Slot No. LOD PATCH(Optional) RNC
SN Slot No. SET OPTLOP(Mandatory) RNC
SN Slot No. PING IP(Mandatory) RNC
SN Slot No.
ADD BRD(Optional)
CLR BRD(Mandatory)
STR
CPUUSAGETST(Mandator
y)
ULD
RSTINFO(Mandatory)
RNC
SN Slot No. SET QUEUEMAP(Mandatory) RNC
SN Slot No. SET E1T1(Mandatory) RNC
SN Slot No.
ACT MSP(Mandatory)
SET
MSPCMD(Mandatory)
CLR MSPREP(Mandatory)
SWP
ETHPORT(Mandatory)
SET MSP(Mandatory)
ADD
ETHREDPORT(Mandatory
)
RNC
SN Slot No. INH BRD(Optional) RNC
SN Slot No. UIN BRD(Optional) RNC
SN Slot No. SET COPTLNK(Mandatory)RNC
SN Slot No.
ADD
PPPLNK(Mandatory)
STR IMATST(Mandatory)
SET
E1T1LOP(Mandatory)
LOP E1T1(Mandatory)
STR
E1T1TST(Mandatory)
TRC IPADDR(Mandatory)
SET CLK(Mandatory)
ADD
FRALNK(Mandatory)
ADD
TSCROSS(Mandatory)
ADD
IMAGRP(Mandatory)
ADD
UNILNK(Mandatory)
ADD
IMALNK(Mandatory)
ADD DEVIP(Mandatory)
ADD IPRT(Mandatory)
SET OPT(Mandatory)
ACT
ETHPORT(Mandatory)
SET
ETHPORT(Mandatory)
ADD MPGRP(Mandatory)
ADD MPLNK(Mandatory)
ADD ETHIP(Mandatory)
ADD
VLANID(Mandatory)
ADD
IPPATHBIND(Mandatory)
RNC
SN Slot No. ACT FAN(Mandatory) RNC
SN Slot No. ACT VCLCC(Mandatory) RNC
SN Slot No. ADD SAALLNK(Mandatory) RNC
SN Slot No. ADD ADJNODE(Mandatory) RNC
SN Slot No. ADD SCTPLNK(Mandatory)RNC
SN Control slot No. ADD M3LNK(Mandatory) RNC
SN Slot No. SET PHBMAP(Mandatory) RNC
SN Slot No. ADD MTP3LNK(Mandatory) RNC
SNAC Sharing Network Area Code
ADD
LASNAMAP(Mandatory)
ADD
IMSISNAMAP(Mandatory)
RNC
SnaExistInd SNAC Configuration Indication ADD IMSISNAMAP(Mandatory) RNC
SndLdInfo2GsmInd Send Load Info to GSM Ind SET INTERRATHONCOV(Optional) RNC
SPC OSP code ADD OPC(Optional) RNC
SPCBITS OSP code bits ADD OPC(Mandatory) RNC
SPCDNF OSP code ADD OPC(Optional) RNC
SpdEstSwitch Algorithm Switch for UE speed estimation ADD CELLHCSHO(Optional) RNC
SPDF Signal point data format
ADD N7DPC(Optional)
ADD OPC(Optional) RNC
SPEED FE port speed SET ETHPORT(Optional) RNC
SpeedDependentScalingFactor Speed dependent scaling factor for reselection delay ADD CELLSELRESEL(Optional) RNC
SpgId Service priority group Identity
ADD SPG(Mandatory)
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory) RNC
SPI Scheduling Priority Indicator
SET
SPIFACTOR(Mandatory)
SET
SCHEDULEPRIOMAP(M
andatory) RNC
SPORTNO Src Port NO. STR IPLOPTST(Mandatory)RNC
SpucHeavy Load level division threshold 1 ADD CELLPUC(Optional) RNC
SpucHyst Load level division hysteresisADD CELLPUC(Optional) RNC
SpucLight Load level division threshold 2 ADD CELLPUC(Optional) RNC
SPUShareThd SPU traffic share threshold SET SPUSHARETHD(Optional) RNC
SrbChlType SRB channel type SET FRCCHLTYPEPARA(Optional) RNC
SrbChlTypeRrcEffectFlag SRB channel type RRC effect flag SET FRCCHLTYPEPARA(Optional) RNC
SRBDL SRB service downlink factor ADD TRMFACTOR(Optional) RNC
SRBGBR SRB MAC-c flow GBR ADD CELLEFACH(Optional) RNC
SRBMBR SRB MAC-c flow MBR ADD CELLEFACH(Optional) RNC
SRBPRIPATH SRB primary path ADD TRMMAP(Optional) RNC
SRBPRITH Signal pri path load thresholdADD LOADEQ(Optional) RNC
SRBSECPATH SRB secondary path ADD TRMMAP(Optional) RNC
SRBSECWHT Signal pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
SRBUL SRB service uplink factor ADD TRMFACTOR(Optional) RNC
SRCE1T1LNKN Source link No. ADD TSCROSS(Mandatory)RNC
SRCGRD Clock source priority ADD CLKSRC(Mandatory) RNC
SRCGRD Currently system clock priority SET CLKMODE(Mandatory)RNC
SRCIP Source IP ADD FLOW(Mandatory) RNC
SRCMEPID MEP ID
PING MAC(Mandatory)
TRC MAC(Mandatory)
RNC
SRCT Clock source type ADD CLKSRC(Mandatory) RNC
SRCTSN Source time slot No. ADD TSCROSS(Mandatory)RNC
SRECTMR Timer_REPEAT-SREC ADD SAALLNK(Optional) RNC
SRN Subrack No.
ADD
CBSADDR(Mandatory)
SET
NCELLDETECTSWITCH(
Mandatory)
ADD
IURCOMMSCCP(Mandato
ry)
ADD NODEB(Mandatory)
RNC
SRN Subrack No.
FMT DATA(Optional)
SET OFFLINE(Optional)
SET ONLINE(Optional)
ACT CRC(Optional)
SET
MRSCOPECTRL(Mandato
ry)
RNC
SRN Subrack No. ADD SUBRACK(Mandatory) RNC
SRN Subrack No.
ADD BRD(Mandatory)
SWP BRD(Mandatory)
CLR BRD(Mandatory)
SET
MSPCMD(Mandatory)
CLR MSPREP(Mandatory)
ULD
LOGTOBAM(Mandatory)
STR
CPUUSAGETST(Mandator
y)
STR IMATST(Mandatory)
SET
E1T1LOP(Mandatory)
LOP E1T1(Mandatory)
STR
E1T1TST(Mandatory)
LOD PATCH(Optional)
SET OPTLOP(Mandatory)
ULD
RSTINFO(Mandatory)
PING IP(Mandatory)
SWP
ETHPORT(Mandatory)
SET
QUEUEMAP(Mandatory)
SET E1T1(Mandatory)
SET MSP(Mandatory)
ACT MSP(Mandatory)
ADD
FRALNK(Mandatory)
ADD
TSCROSS(Mandatory)
ADD
RNC
SRN Subrack No. SET CLK(Mandatory) RNC
SRN Subrack No. ADD EMU(Mandatory) RNC
SRN Subrack No. ADD SAALLNK(Mandatory) RNC
SRN Subrack No. ADD ADJNODE(Mandatory) RNC
SRN Subrack No. ADD SCTPLNK(Mandatory)RNC
SRN Subrack No. ADD RSCGRP(Mandatory) RNC
SRN Control subrack No. ADD M3LNK(Mandatory) RNC
SRN Subrack No. SET PHBMAP(Mandatory) RNC
SRN Subrack No. ADD MTP3LNK(Mandatory) RNC
SRName Subrack name ADD SUBRACK(Mandatory) RNC
SrncBeDlRlcQosSwitch Srnc Parameter for BE Downlink RLC QOS SET QOSACT(Optional) RNC
SrnsRabCnDomainType SRNS relocation-allowed traffic type SET SRNSR(Optional) RNC
SRNSRDelayOffset Estimated non-measurement delay offset SET SRNSR(Optional) RNC
SRNSRExpiryTime SRNS relocation expiry time SET SRNSR(Optional) RNC
SRNSRIurReselectTimerLenSRNSR Iur reselection timer SET SRNSR(Optional) RNC
SrnsrSeparateDuration Duration of triggering static relocation SET SRNSR(Optional) RNC
SrnsrSwitch SRNSR algorithm switch SET CORRMALGOSWITCH(Optional) RNC
SRNSRTrigTimer Relocation trigger timer after IurCCH SET SRNSR(Optional) RNC
SRNTI SRNTI RST IUR(Mandatory) RNC
SRT Subrack type SET CLK(Mandatory) RNC
SSCHPower SSCH transmit power ADD SSCH(Optional) RNC
SSCPUAVEUSAGEALMTHD CPU occupancy alarm clearance threshold SET CPUTHD(Optional) RNC
SSCPUMAXUSAGEALMTHD CPU occupancy alarm threshold SET CPUTHD(Optional) RNC
Ssd Source description ADD TYPRABBASIC(Mandatory) RNC
SSDSPAVEUSAGEALMTHD DSP occupancy alarm clearance threshold SET CPUTHD(Optional) RNC
SSDSPMAXUSAGEALMTHD DSP occupancy alarm threshold SET CPUTHD(Optional) RNC
SsearchHCS HCS cell reselection threshold ADD CELLHCS(Optional) RNC
SsearchRat Inter-RAT cell reselection threshold ADD CELLSELRESEL(Optional) RNC
SSN Subsystem No.
ACT CRC(Optional)
CMP
TBLDATA(Mandatory) RNC
SSN Subsystem No.
ADD
RNCCBCPUID(Mandatory
)
SET
MRSCOPECTRL(Mandato
ry)
ADD NODEB(Optional)
STR
CPUUSAGETST(Mandator
y)
ULD
RSTINFO(Mandatory)
RNC
ST StartTime SET TZ(Mandatory) RNC
ST Service type ADD ATMTRF(Mandatory) RNC
StaBlkNum5A Statistic Block Number For 5A Event ADD TYPRABQUALITYMEAS(Mandatory) RNC
StartFlag GPS Frame Timing Active Flag ADD CELLGPSFRMTIMING(Optional) RNC
StartTime1 First Cell Dynamic ShutDown Interval Start Time ADD CELLDYNSHUTDOWN(Mandatory) RNC
StartTime2 Second Cell Dynamic ShutDown Interval Start Time ADD CELLDYNSHUTDOWN(Mandatory) RNC
StartTime3 Third Cell Dynamic ShutDown Interval Start Time ADD CELLDYNSHUTDOWN(Mandatory) RNC
StateIndTmr CN protection timer SET IUTIMERANDNUM(Optional) RNC
StateIndTMR Sccp state ind protection timer ADD NRNC(Optional) RNC
STATLEN MaxSTAT ADD SAALLNK(Optional) RNC
STP STP function switch ADD N7DPC(Optional) RNC
STPMODE Stop mode STR CPUUSAGETST(Mandatory) RNC
StreamDlMBR Downlink maximum bit rate of Streaming SET USERMBR(Optional) RNC
STREAMGBR Streaming MAC-c flow GBRADD CELLEFACH(Optional) RNC
StreamHsupa2msTtiRateThs Rate threshold of Streaming on 2ms TTI of HSUPA SET FRC(Optional) RNC
STREAMMBR Streaming MAC-c flow MBRADD CELLEFACH(Optional) RNC
StreamUlMBR Uplink maximum bit rate of Streaming SET USERMBR(Optional) RNC
STTDInd STTD indicator
ADD
SCCPCHBASIC(Optional)
ADD AICH(Optional)
ADD PICH(Optional)
ADD
CELLMBMSSCCPCH(Opt
ional)
SET
MBMSSCCPCH(Optional)
RNC
STTDSupInd STTD support indicator
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
RNC
SubflowIndex Service subflow index
ADD
TYPRABOLPC(Mandatory
)
ADD
TYPRABRLC(Mandatory) RNC
SUBFRAMELEN Max subframe length ADD IPPATH(Optional) RNC
SUBNET Subnet No. SET SUBNET(Mandatory) RNC
SupBmc CBS support ADD QUICKCELLSETUP(Optional) RNC
SuppDlSf512 Support downlink DPCH SF 512 ADD NODEBLMTPARA(Optional) RNC
SuppDpcmodeChgFlag Support DPC mode Change ind ADD NRNCCELL(Optional)RNC
SuppDpcTriplet Support DPC mode TRIPLETADD NODEBLMTPARA(Optional) RNC
SuppIurCch IUR CCH support flag ADD NRNC(Optional) RNC
SUPPORTBAKCLKSRC Is support back clock source SET CLK(Optional) RNC
SupportCRType CR support type ADD CNNODE(Optional) RNC
SuppPSHOFlag Inter-RAT cell support PS HO indicator ADD GSMCELL(Optional) RNC
SuppPsRtServOnHsdpa Support PS realtime traffic on HSDPA ADD NODEBLMTPARA(Optional) RNC
SuppRIMFlag Inter-RAT cell support RIM indicator ADD GSMCELL(Optional) RNC
SW Switch SET ALMPORT(Optional) RNC
SWEEK Start week SET TZ(Mandatory) RNC
Switch Port switch SET SCUPORT(Mandatory) RNC
SWITCH Bfd Protocol Switch SET BFDPROTOSW(Mandatory) RNC
Switch3GPP25415CR0125 Switch3GPP25415CR0125 ADD CNNODE(Optional) RNC
SWITCHBACKFLAG Switch primary IP address flag ADD SCTPLNK(Optional) RNC
SWITCHBACKHBNUM Switch back HB number ADD SCTPLNK(Optional) RNC
SwitchParameter1 SwitchParameter1 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter10 SwitchParameter10 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter2 SwitchParameter2 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter3 SwitchParameter3 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter4 SwitchParameter4 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter5 SwitchParameter5 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter6 SwitchParameter6 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter7 SwitchParameter7 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter8 SwitchParameter8 SET SS7PATCHSWITCH(Optional) RNC
SwitchParameter9 SwitchParameter9 SET SS7PATCHSWITCH(Optional) RNC
SWSEQ Start week sequence SET TZ(Mandatory) RNC
SysAmrRrcNum AMR_RRC Number per Second for System SET CALLSHOCKCTRL(Optional) RNC
SYSCONTACT Contact mode of the manufacturer SET SYS(Optional) RNC
SYSDESC System description SET SYS(Optional) RNC
SysHighPriRrcNum HiPri_RRC Number per Second for System SET CALLSHOCKCTRL(Optional) RNC
SysHoPsResumeTmr PS resume timer after SYSHOSET STATETIMER(Optional) RNC
SYSLOCATION System Location SET SYS(Optional) RNC
SYSOBJECTID System ID SET SYS(Optional) RNC
SysRrcRejNum Max RRC_REJ Number per Second for System SET CALLSHOCKCTRL(Optional) RNC
SYSSERVICES System services SET SYS(Optional) RNC
SysTotalRrcNumThd System Call Shock Trigger Threshold SET CALLSHOCKCTRL(Optional) RNC
T10TMR Signalling route set test timerSET MTP3TMR(Optional) RNC
T12TMR Uninhibit ACK timer SET MTP3TMR(Optional) RNC
T13TMR Force uninhibit timer SET MTP3TMR(Optional) RNC
T14TMR Inhibition ACK timer SET MTP3TMR(Optional) RNC
T17TMR Link realignment timer SET MTP3TMR(Optional) RNC
T1TMR Time-control changeover timer SET MTP3TMR(Optional) RNC
T22TMR Local inhibit test timer SET MTP3TMR(Optional) RNC
T23TMR Remote inhibit test timer SET MTP3TMR(Optional) RNC
T2TMR Changeover ACK timer SET MTP3TMR(Optional) RNC
T300 Timer 300 SET IDLEMODETIMER(Optional) RNC
T302 Timer 302 SET CONNMODETIMER(Optional) RNC
T304 Timer 304 SET CONNMODETIMER(Optional) RNC
T305 Timer 305 SET CONNMODETIMER(Optional) RNC
T307 Timer 307 SET CONNMODETIMER(Optional) RNC
T308 Timer 308 SET CONNMODETIMER(Optional) RNC
T309 Timer 309 SET CONNMODETIMER(Optional) RNC
T312 Timer 312
SET
CONNMODETIMER(Opti
onal)
SET
IDLEMODETIMER(Optio
nal) RNC
T313 Timer 313 SET CONNMODETIMER(Optional) RNC
T314 Timer 314 SET CONNMODETIMER(Optional) RNC
T315 Timer 315 SET CONNMODETIMER(Optional) RNC
T316 Timer 316 SET CONNMODETIMER(Optional) RNC
T3212 Periodical location update timer ADD CNDOMAIN(Optional) RNC
T381 Timer 381 SET CONNMODETIMER(Optional) RNC
T3TMR Time-control changeback timer SET MTP3TMR(Optional) RNC
T4TMR Changeover ACK first attempt timer SET MTP3TMR(Optional) RNC
T5TMR Changeover ACK second attempt timer SET MTP3TMR(Optional) RNC
T8TMR Transmission prohibited inhibition timer SET MTP3TMR(Optional) RNC
TagetRlcRetrans Target RLC Retransmission rate SET RACHMEASUREPARA(Optional) RNC
TargetFreqCsThdEcN0 Inter-freq CS target frequency trigger Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TargetFreqCsThdRscp Inter-freq CS target frequency trigger RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TargetFreqHThdEcN0 Inter-freq H target frequency trigger Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TargetFreqHThdRscp Inter-freq H target frequency trigger RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TargetFreqR99PsThdEcN0 Inter-freq R99 PS target frequency trigger Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TargetFreqR99PsThdRscp Inter-freq R99 PS target frequency trigger RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TargetRatCsThd Inter-RAT CS handover decision THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
TargetRatHThd Inter-RAT H handover decision THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
TargetRatR99PsThd Inter-RAT R99 PS handover decision THD
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
TB Output Segment No. EXP DEVFILE(Optional) RNC
TbIndexNum Configured TBS Count for HS-SCCH Less Mode SET HSSCCHLESSOPPARA(Optional) RNC
TbNumber1 TB number of TF1
ADD
FACHDYNTFS(Optional)
ADD
PCHDYNTFS(Optional)
ADD
RACHDYNTFS(Optional)
RNC
TbNumber2 TB number of TF2
ADD
FACHDYNTFS(Optional)
ADD
PCHDYNTFS(Optional)
ADD
RACHDYNTFS(Optional) RNC
TbNumber3 TB number of TF3 ADD FACHDYNTFS(Optional) RNC
TbSizeIndex1 TB Size Index 1 SET HSSCCHLESSOPPARA(Optional) RNC
TbSizeIndex2 TB Size Index 2 SET HSSCCHLESSOPPARA(Optional) RNC
TbSizeIndex3 TB Size Index 3 SET HSSCCHLESSOPPARA(Optional) RNC
TbSizeIndex4 TB Size Index 4 SET HSSCCHLESSOPPARA(Optional) RNC
TC Test code ADD MTP3LNK(Optional) RNC
TCell Time offset
ADD
CELLSETUP(Mandatory)
ADD
QUICKCELLSETUP(Man
datory) RNC
TCellId Target cell ID HO CELL(Optional) RNC
TCLEN Test code length ADD MTP3LNK(Optional) RNC
TCRmax Time for evaluating max cell reselection ADD CELLHCS(Optional) RNC
TCrmaxHyst Time before revert to low-mobility meas ADD CELLHCS(Optional) RNC
Tcrmaxhystnonhcs Non-HCS TCR max hysteresis ADD CELLSELRESEL(Optional) RNC
Tcrmaxnonhcs Non-HCS max TCR ADD CELLSELRESEL(Optional) RNC
TCycleSlow Period of UE slow speed decision
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
RNC
TEMP_MASK Enable Temperature Alarm Reporting ADD EMU(Optional) RNC
TEMP_THD_HIGH Upper Limit of Temperature Alarm ADD EMU(Optional) RNC
TEMP_THD_LOW Lower Limit of Temperature Alarm ADD EMU(Optional) RNC
TempOffset1 HCS Cell Reselect TempOffset1
ADD
INTRAFREQNCELL(Opti
onal)
ADD
INTERFREQNCELL(Optio
nal)
ADD
GSMNCELL(Optional)
RNC
TempOffset2 HCS Cell Reselect TempOffset2
ADD
INTRAFREQNCELL(Opti
onal)
ADD
INTERFREQNCELL(Optio
nal) RNC
TenMsecForAmrE AMR Event E Reporting Period In 10ms
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
TenMsecForBeE BE Event E Reporting Period In 10ms
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
TenMsecForBeF BE Event F Reporting Period In 10ms
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
TenMsecForDlBasicMeas DL basic meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory)
RNC
TenMsecForDlOlcMeas DL OLC meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
TenMsecForHsdpaPrvidRateMeas HSDPA bit rate meas cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory)
RNC
TenMsecForHsdpaPwrMeas HSDPA need pwr meas cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
TenMsecForHsupaPrvidRateMeas HSUPA bit rate meas cycle SET LDM(Mandatory) RNC
TenMsecForUlBasicMeas UL basic meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory)
RNC
TenMsecForUlOlcMeas UL OLC meas rprt cycle
SET LDM(Mandatory)
SET
SATLDM(Mandatory) RNC
TenMsecForVpE VP Event E Reporting Period In 10ms
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
TFastSpdEst Time window for UE fast speed decision
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
RNC
TFCIpresence TFCI existing indicator ADD SCCPCHBASIC(Mandatory) RNC
TFsNumber Number of TFs
ADD
FACHDYNTFS(Mandatory
)
ADD
PCHDYNTFS(Mandatory)
ADD
RACHDYNTFS(Mandator
y)
RNC
TG Target BAM SWP BAMAREA(Mandatory) RNC
Thd5A Event 5A Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
ThdEa Event Ea Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
ThdEb Event Eb Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
THP Traffic Handling Priority SET SCHEDULEPRIOMAP(Mandatory) RNC
THP10Class User Class of Traffic Handler Priority 10 SET IAVUSERTHPCLASS(Optional) RNC
THP11Class User Class of Traffic Handler Priority 11 SET IAVUSERTHPCLASS(Optional) RNC
THP12Class User Class of Traffic Handler Priority 12 SET IAVUSERTHPCLASS(Optional) RNC
THP13Class User Class of Traffic Handler Priority 13 SET IAVUSERTHPCLASS(Optional) RNC
THP14Class User Class of Traffic Handler Priority 14 SET IAVUSERTHPCLASS(Optional) RNC
THP15Class User Class of Traffic Handler Priority 15 SET IAVUSERTHPCLASS(Optional) RNC
THP1Class User Class of Traffic Handler Priority 1 SET IAVUSERTHPCLASS(Optional) RNC
THP2Class User Class of Traffic Handler Priority 2 SET IAVUSERTHPCLASS(Optional) RNC
THP3Class User Class of Traffic Handler Priority 3 SET IAVUSERTHPCLASS(Optional) RNC
THP4Class User Class of Traffic Handler Priority 4 SET IAVUSERTHPCLASS(Optional) RNC
THP5Class User Class of Traffic Handler Priority 5 SET IAVUSERTHPCLASS(Optional) RNC
THP6Class User Class of Traffic Handler Priority 6 SET IAVUSERTHPCLASS(Optional) RNC
THP7Class User Class of Traffic Handler Priority 7 SET IAVUSERTHPCLASS(Optional) RNC
THP8Class User Class of Traffic Handler Priority 8 SET IAVUSERTHPCLASS(Optional) RNC
THP9Class User Class of Traffic Handler Priority 9 SET IAVUSERTHPCLASS(Optional) RNC
THPClass Traffic Handler Priority ClassSET USERGBR(Mandatory)RNC
TIMEOUT Reply Time-Out PING IP(Optional) RNC
TIMEOUT Time Out
PING MAC(Optional)
TRC MAC(Optional) RNC
Timer Block time BLK CELL(Mandatory) RNC
TIMERCU Timer_CU timer ADD AAL2PATH(Optional)RNC
TIMES Number of ping packets PING IP(Optional) RNC
TimeToInterfreqHO Inter-freq coverage handover delay trig time
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TimeToMoniter Time to start re-TX monitor ADD TYPRABRLC(Optional) RNC
TimeToTrig2B 2B event trigger delay time
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TimeToTrig2D 2D event trigger delay time
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TimeToTrig2F 2F event trigger delay time
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
RNC
TimeToTrigForNonVerify Time to trigger for non-verified GSM cell
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
TimeToTrigForPrdInterFreq HHO period trigger delay time
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
TimeToTrigForVerify Time to trigger for verified GSM cell
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
TimetoTrigger4A Time to trigger 4A ADD TYPRABDCCCMC(Optional) RNC
TimetoTrigger4B Time to trigger 4B ADD TYPRABDCCCMC(Optional) RNC
TimeToTriggerA Event A time to trigger ADD TYPRABRLC(Optional) RNC
TimeToTriggerB Event B time to trigger ADD TYPRABRLC(Optional) RNC
TMI TRMMAP ID ADD TRMMAP(Mandatory)RNC
TMIBRZ Bronze user TRMMAP indexADD ADJMAP(Mandatory) RNC
TMIGLD Gold user TRMMAP index ADD ADJMAP(Mandatory) RNC
TMISLV Silver user TRMMAP index ADD ADJMAP(Mandatory) RNC
TMT1TMR Signalling link test ACK timer SET MTP3TMR(Optional) RNC
TMT2TMR Signalling link repeat test timer SET MTP3TMR(Optional) RNC
TnlBearerType IUB trans bearer type ADD NODEB(Optional) RNC
TnlBearerType IUR transmission bearer typeADD NRNC(Mandatory) RNC
TnlBearerType Iu transfers bearer type ADD CNNODE(Optional) RNC
TO AdjustMethod SET TZ(Mandatory) RNC
ToAWE Time of arrival window endpoint
ADD FACH(Mandatory)
ADD PCH(Optional)
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional)
RNC
ToAWS Time of arrival window startpoint
ADD FACH(Mandatory)
ADD PCH(Optional)
ADD
CELLMBMSFACH(Option
al)
SET
MBMSFACH(Optional)
RNC
TotalUserNumThd Cell Dynamic ShutDown Total User number Threshold ADD CELLDYNSHUTDOWN(Optional) RNC
TP Log type COL FAMLOG(Mandatory) RNC
TpenaltyHcsReselect HCS Cell Reselect Penalty Timer
ADD
INTRAFREQNCELL(Opti
onal)
ADD
INTERFREQNCELL(Optio
nal)
ADD
GSMNCELL(Optional)
RNC
TrafficClass Traffic Class ADD TYPRABBASIC(Mandatory) RNC
TrafficClass Traffic Class
SET
SCHEDULEPRIOMAP(M
andatory)
SET
USERGBR(Mandatory)
SET
FACHBANDWIDTH(Man
datory)
SET
USERHAPPYBR(Mandato
ry)
SET
DTXDRXPARA(Mandator
y)
SET
HSSCCHLESSOPPARA(
Mandatory)
RNC
TrafficType Traffic Type
SET
REDIRECTION(Mandator
y)
ADD
CELLREDIRECTION(Man
datory) RNC
TRAMODE Traffic mode ADD M3LKS(Optional) RNC
TransCchUserNum Transfer Common Channel User number ADD CELLOLC(Optional) RNC
TRANSDELAY IUB Trans Delay ADD NODEB(Optional) RNC
TRANST Transport Type ADD IPPATH(Optional) RNC
TRANST Transport Type
ADD
TRMMAP(Mandatory)
ADD
ADJMAP(Mandatory)
ADD
ADJNODE(Mandatory)
RNC
TrChId FACH ID
ADD FACH(Mandatory)
ADD
FACHLOCH(Mandatory)
ADD RACH(Optional)
ADD
PCHDYNTFS(Optional)
ADD
FACHDYNTFS(Mandatory
)
ADD PCH(Optional)
ADD
RACHDYNTFS(Optional)
ADD BCH(Optional)
RNC
TrchType Transport channel type ADD TYPRABHSPA(Mandatory) RNC
TrchType Transport channel type ADD TYPRABOLPC(Mandatory) RNC
TrchType Transport channel type ADD TYPRABRLC(Mandatory) RNC
TRelateLength Related length for 1D records
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
RNC
Treselections Reselection delay time ADD CELLSELRESEL(Optional) RNC
Treselectionsfach Reselection delay time for UE in CELL_FACH state ADD CELLSELRESEL(Optional) RNC
Treselectionspch Reselection delay time for UE in PCH state ADD CELLSELRESEL(Optional) RNC
TRFX Traffic record index ADD ATMTRF(Mandatory) RNC
TrigTime1A 1A event trigger delay time
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
SET SMLC(Mandatory)
RNC
TrigTime1B 1B event trigger delay time
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
SET SMLC(Mandatory)
RNC
TrigTime1C 1C event trigger delay time
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
TrigTime1D 1D event trigger delay time
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
TrigTime1F 1F event trigger delay time
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
TrigTime1J 1J event trigger delay time
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
TrigTime2C 2C event trigger delay time
ADD
CELLINTERFREQHONC
OV(Optional)
SET
INTERFREQHONCOV(O
ptional)
ADD
CELLMBDRINTERFREQ(
Optional)
RNC
TrigTime2D 2D event trigger delay time
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
TrigTime2F 2F event trigger delay time
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
TrigTime3A 3A event trigger delay time
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
TrigTime3C 3C event trigger delay time
ADD
CELLINTERRATHONCO
V(Optional)
SET
INTERRATHONCOV(Opt
ional)
ADD
CELLMBDRINTERRAT(
Optional)
RNC
TrigTime6F 6F event trigger delay time SET HOCOMM(Optional) RNC
TrigTime6G 6G event trigger delay time SET HOCOMM(Optional) RNC
TRKLNKPN Trunk Link No. ADD ETHTRKLNK(Mandatory) RNC
TRKLNKSN Trunk Link Slot No. ADD ETHTRKLNK(Mandatory) RNC
TRKN Trunk No.
ADD
ETHTRK(Mandatory)
ADD
ETHTRKIP(Mandatory)
ADD
ETHTRKLNK(Mandatory) RNC
TRlFailure Radio link failure timer lengthADD CELLSETUP(Optional) RNC
TRncId RNC ID of Target Cell HO CELL(Optional) RNC
TRUNKDHCPSVRIP TRUNK Dhcp Server IP ADD NODEBESN(Mandatory) RNC
TRUNKIP NodeB Interface IP Address ADD NODEBESN(Mandatory) RNC
TRUNKIPMASK NodeB Interface IP Mask ADD NODEBESN(Mandatory) RNC
TRUNKN The Trunk group No. ADD IPLOGICPORT(Mandatory) RNC
TS time slot No. LOP E1T1(Mandatory) RNC
TS16ENABLE 16TimeSlot switch SET E1T1(Optional) RNC
TSBITMAP Bearing time slot
ADD
PPPLNK(Mandatory)
ADD
FRALNK(Mandatory)
ADD MPLNK(Mandatory)
RNC
TSCROSSX Time slot cross index ADD TSCROSS(Optional) RNC
TSKN Task Name STR SCHTSK(Optional) RNC
TSlowSpdEst Time window for UE slow speed decision
ADD
CELLHCSHO(Optional)
SET HCSHO(Optional)
RNC
TstImsi MGWTST USER IMSI SET MGWTST(Mandatory) RNC
TSTLEN Test Len STR IPLOPTST(Optional) RNC
TstSwitch MGWTST SWITCH SET MGWTST(Mandatory) RNC
TTIME Duration time STR CPUUSAGETST(Mandatory) RNC
TTL PKT TTL TRC MAC(Optional) RNC
TXBW Forward bandwidth ADD ATMLOGICPORT(Mandatory) RNC
TXBW Forward bandwidth ADD IPPATH(Mandatory) RNC
TxBw Forward Bandwidth ADD RSCGRP(Mandatory) RNC
TxDiversityInd TX diversity indication
ADD
CELLSETUP(Mandatory)
ADD
NRNCCELL(Mandatory) RNC
TXINT Interval of send PING IP(Optional) RNC
TXINT Interval of Packet Send STR IPLOPTST(Optional) RNC
TXTRFX TX traffic record index
ADD IPOAPVC(Optional)
ADD
AAL2PATH(Mandatory)
ADD
SAALLNK(Mandatory)
ADD
VPCLCX(Mandatory)
RNC
TYPE Application Type SET CTRLFACTOR(Mandatory) RNC
UARFCNDownlink Downlink UARFCN
ADD
CELLSETUP(Optional)
ADD
QUICKCELLSETUP(Optio
nal)
ADD
NRNCCELL(Optional)
RNC
UARFCNUplink Uplink UARFCN
ADD
CELLSETUP(Optional)
ADD
QUICKCELLSETUP(Optio
nal)
ADD
NRNCCELL(Optional)
RNC
UARFCNUplinkInd UL frequency ind
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional) RNC
UBLREQTMR Unblocking request timer SET AAL2TMR(Optional) RNC
UDPMUXLEN UDP MUX Max Length ADD IPPATH(Optional) RNC
UDPMUXMODRECV Receive UDP MUX Mode ADD IPPATH(Optional) RNC
UDPMUXMODSEND Sender UDP MUX Mode ADD IPPATH(Optional) RNC
UDPMUXTIME UDP MUX Max Time ADD IPPATH(Optional) RNC
UeAssAgpsAssDataSwitch UE-assisted A-GPS Data Send switch SET SMLC(Optional) RNC
UeBasAgpsAssDataSwitch UE-based A-GPS Data Send Switch SET SMLC(Optional) RNC
UeCapEnqRspTmr UE capability enquiry response timer SET STATETIMER(Optional) RNC
UeCntCheckRspTmr UE counter check response timer SET STATETIMER(Optional) RNC
UINT Uninhibit Type UIN BRD(Mandatory) RNC
UINTTIME Unit time STR E1T1TST(Optional) RNC
UL Upper Limit SET ALMPORT(Optional) RNC
UlAmrConvAF UL AF of R99 AMR conv service SET ADMCTRL(Optional) RNC
UlAmrTrigTime6A1 AMR Trigger Time 6A1
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlAmrTrigTime6A2 AMR Trigger Time 6A2
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlAmrTrigTime6B1 AMR Trigger Time 6B1
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlAmrTrigTime6B2 AMR Trigger Time 6B2
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlAmrTrigTime6D AMR Trigger Time 6D
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlBackgroundAF UL AF of R99 background service SET ADMCTRL(Optional) RNC
UlBasicCommMeasFilterCoeff UL basic common measure filter coeff
SET LDM(Optional)
SET SATLDM(Optional)
RNC
UlBeTraffDecThs UL BE traffic DCH decision threshold
SET
FRCCHLTYPEPARA(Opti
onal)
ADD CELLFRC(Optional)
RNC
UlBeTraffInitBitrate UL BE traffic Initial bit rate SET FRC(Optional) RNC
UlBeTraffThsOnHsupa UL BE traffic threshold on HSUPA SET FRCCHLTYPEPARA(Optional) RNC
UlBeTrigTime6A1 BE Trigger Time 6A1
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlBeTrigTime6A2 BE Trigger Time 6A2
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlBeTrigTime6B1 BE Trigger Time 6B1
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlBeTrigTime6B2 BE Trigger Time 6B2
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlBeTrigTime6D BE Trigger Time 6D
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlCacAvgFilterLen UL CAC smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
UlCCHLoadFactor UL common channel load reserved coefficient ADD CELLCAC(Optional) RNC
UlCellTotalThd UL total power threshold ADD CELLCAC(Optional) RNC
UlCmMethod Uplink Compression MethodADD NODEBLMTPARA(Optional) RNC
UlCSInterRatShouldBeHOUeNum UL CS should be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlCSInterRatShouldNotHOUeNum UL CS should not be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlDcccRateThd Uplink Bit Rate Threshold For DCCC SET DCCC(Optional) RNC
UlFpMode UL FP Mode ADD TYPRABBASIC(Mandatory) RNC
UlFullCvrRate Uplink Full Coverage Bit Rate
ADD
CELLDCCC(Optional)
SET DCCC(Optional) RNC
UlGBR Uplink GBR for BE service SET USERGBR(Optional) RNC
UlHoCeResvSf UL handover credit reserved SF ADD CELLCAC(Optional) RNC
UlHsDpcchRsvdFactor UL HS-DPCCH reserve factor ADD CELLCAC(Optional) RNC
UlIMSTransModeOnHsupa IMS signalling transmission mode on HSUPA SET FRC(Optional) RNC
UlInteractAF UL AF of R99 interactive service SET ADMCTRL(Optional) RNC
UlInterFreqHoBWThd UL HO maximum bandwidthADD CELLLDR(Optional) RNC
UlInterFreqHoCellLoadSpaceThd UL HO load space threshold ADD CELLLDR(Optional) RNC
UlLdrAMRRateReductionRabNum UL LDR-AMR rate reduction RAB number ADD CELLLDR(Optional) RNC
UlLdrAvgFilterLen UL LDR smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
UlLdrBERateReductionRabNum UL LDR-BE rate reduction RAB number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrCreditSfResThd UL LDR credit SF reserved threshold
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrEighthAction UL LDR eighth action ADD CELLLDR(Optional) RNC
UlLdrFifthAction UL LDR fifth action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrFirstAction UL LDR first action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrFourthAction UL LDR fourth action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrPsRTQosRenegRabNum UL LDR un-ctrl RT Qos re-nego RAB num
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrRelThd UL LDR release threshold ADD CELLLDM(Optional) RNC
UlLdrSecondAction UL LDR second action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrSeventhAction UL LDR seventh action ADD CELLLDR(Optional) RNC
UlLdrSixthAction UL LDR sixth action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrThirdAction UL LDR third action
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlLdrTrigThd UL LDR trigger threshold ADD CELLLDM(Optional) RNC
UlMaxNumOfTfc Uplink Maximum Number of TFC ADD NODEBLMTPARA(Optional) RNC
UlMeasFilterCoef UL Measurement Filter Coefficient
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlMidRateCalc Uplink Mid Bit Rate Calculate Method SET DCCC(Optional) RNC
UlMidRateThd Uplink Mid Bit Rate Threshold SET DCCC(Mandatory) RNC
UlModeChangeTimerLen UL Mode Change Timer Length
SET AMRC(Optional)
SET AMRCWB(Optional)
RNC
UlNonAmrConvAF UL AF of R99 non AMR conv service SET ADMCTRL(Optional) RNC
UlNonCtrlThdForAMR UL threshold of Conv AMR service ADD CELLCAC(Optional) RNC
UlNonCtrlThdForHo UL handover access thresholdADD CELLCAC(Optional) RNC
UlNonCtrlThdForNonAMR UL threshold of Conv non_AMR service ADD CELLCAC(Optional) RNC
UlNonCtrlThdForOther UL threshold of other services ADD CELLCAC(Optional) RNC
UlOlcAvgFilterLen UL OLC smoothing filter length
SET LDM(Optional)
SET SATLDM(Optional) RNC
UlOlcFTFRstrctRabNum UL OLC fast TF restrict RAB number ADD CELLOLC(Optional) RNC
UlOlcFTFRstrctTimes UL OLC fast TF restrict times ADD CELLOLC(Optional) RNC
UlOlcMeasFilterCoeff UL overload measure filter coeff
SET LDM(Optional)
SET SATLDM(Optional) RNC
UlOlcRelThd UL OLC release threshold ADD CELLLDM(Optional) RNC
UlOlcTraffRelRabNum UL OLC traff release RAB number ADD CELLOLC(Optional) RNC
UlOlcTrigHyst UL OLC trigger hysteresis
SET LDM(Optional)
SET SATLDM(Optional) RNC
UlOlcTrigThd UL OLC trigger threshold ADD CELLLDM(Optional) RNC
UlPSInterRatShouldBeHOUeNum UL PS should be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlPSInterRatShouldNotHOUeNum UL PS should not be HO user number
ADD CELLLDR(Optional)
ADD
NODEBLDR(Optional)
RNC
UlQosAmrAdjSwitch Adjustment Switch For AMR Uplink Rate SET QOSACT(Optional) RNC
UlQosAmrInterFreqHoSwitchInterFreq HO For Switch For Uplink AMR SET QOSACT(Optional) RNC
UlQosAmrInterRatHoSwitchInterRat HO Switch For Uplink AMR SET QOSACT(Optional) RNC
ULQosMcTimerLen Up Link Qos Measure timer length
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
RNC
UlQosVpInterFreqHoSwitch InterFreq HO Switch For Uplink VP SET QOSACT(Optional) RNC
UlQosWAmrAdjSwitch Switch Of WAMR Uplink Rate Adjustment SET QOSACT(Optional) RNC
UlQosWAmrInterFreqHoSwitch InterFreq HO Switch For Uplink WAMR SET QOSACT(Optional) RNC
UlQosWAmrInterRatHoSwitch InterRat HO Switch For Uplink WAMR SET QOSACT(Optional) RNC
UlRateDnAdjLevel Uplink Rate Decrease Adjust Level SET DCCC(Optional) RNC
UlRateUpAdjLevel Uplink Rate Increase Adjust Level SET DCCC(Optional) RNC
UlSFTurnPoint UL SF threshold
ADD
CELLCMCF(Optional)
SET CMCF(Optional)
RNC
UlSrbActFactor UL AF of SRB SET ADMCTRL(Optional) RNC
UlSRBTransModeOnHsupa SRB transmission mode on HSUPA SET FRC(Optional) RNC
UlStreamAF UL AF of R99 Streaming service SET ADMCTRL(Optional) RNC
UlStrThsOnHsupa UL streaming traffic threshold on HSUPA SET FRCCHLTYPEPARA(Optional) RNC
UlStrTransModeOnHsupa Streaming traffic transmission mode on HSUPA SET FRC(Optional) RNC
UlThd6A1 Uplink Event 6A1 Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
UlThd6A2 Uplink Event 6A2 Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
UlThd6B1 Uplink Event 6B1 Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
UlThd6B2 Uplink Event 6B2 Relative Threshold ADD TYPRABQUALITYMEAS(Mandatory) RNC
UlTotalEqUserNum UL total equivalent user number ADD CELLCAC(Optional) RNC
UlTpcStepSize UL closed loop power control step size SET FRC(Optional) RNC
UlVpTrigTime6A1 VP Trigger Time 6A1
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlVpTrigTime6B1 VP Trigger Time 6B1
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UlVpTrigTime6D VP Trigger Time 6D
ADD
CELLQUALITYMEAS(Op
tional)
SET
QUALITYMEAS(Optional
)
RNC
UncertAltitude Cell Center Uncertainty Altitude ADD SMLCCELL(Optional)RNC
UncertAltitudeImp Cell Center Uncertainty Altitude ADD SMLCCELL(Optional)RNC
UncertSemiMajor Cell Center Uncertainty Semi-major ADD SMLCCELL(Optional)RNC
UncertSemiMajorImp Cell Center Uncertainty Semi-major ADD SMLCCELL(Optional)RNC
UncertSemiMinor Cell Center Uncertainty Semi-minor ADD SMLCCELL(Optional)RNC
UncertSemiMinorImp Cell Center Uncertainty Semi-minor ADD SMLCCELL(Optional)RNC
UNILNKN UNI link No. ADD UNILNK(Mandatory) RNC
UpLimitCountingTime Up Limit Counting Time SET RNCMBMSPARA(Optional) RNC
UPPERANI Upper Ani ADD ADJNODE(Mandatory) RNC
UPPERGRPID Upper Class Transport Resource Group No. ADD RSCGRP(Mandatory) RNC
UPPERVP The Upper Logical port Number ADD ATMLOGICPORT(Optional) RNC
URA1 URA ID 1 ADD QUICKCELLSETUP(Mandatory) RNC
URA2 URA ID 2 ADD QUICKCELLSETUP(Mandatory) RNC
URA3 URA ID 3 ADD QUICKCELLSETUP(Mandatory) RNC
URA4 URA ID 4 ADD QUICKCELLSETUP(Mandatory) RNC
URA5 URA ID 5 ADD QUICKCELLSETUP(Mandatory) RNC
URA6 URA ID 6 ADD QUICKCELLSETUP(Mandatory) RNC
URA7 URA ID 7 ADD QUICKCELLSETUP(Mandatory) RNC
URA8 URA ID 8 ADD QUICKCELLSETUP(Mandatory) RNC
URAId URA ID
ADD URA(Mandatory)
ADD
CELLURA(Mandatory)
ADD
NRNCURA(Mandatory) RNC
URANUM URA number ADD QUICKCELLSETUP(Mandatory) RNC
UsedFreqCSThdEcN0 Inter-freq CS Used frequency trigger Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
UsedFreqCSThdRSCP Inter-freq CS Used frequency trigger RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
UsedFreqHThdEcN0 Inter-freq H Used frequency trigger Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
UsedFreqHThdRSCP Inter-freq H Used frequency trigger RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
UsedFreqMeasQuantityForQos3A 3A Used-Freq Measure Quantity for Qos
ADD
CELLQOSHO(Optional)
SET QOSHO(Optional)
RNC
UsedFreqR99PsThdEcN0 Inter-freq R99 PS Used frequency trigger Ec/No THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
UsedFreqR99PsThdRSCP Inter-freq R99 PS Used frequency trigger RSCP THD
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
USEFE Use FE or not ADD NODEBESN(Mandatory) RNC
UseMacehs Mac-ehs use flg SET HSSCCHLESSOPPARA(Mandatory) RNC
USEMP Use MP or not ADD NODEBESN(Mandatory) RNC
USENBLB2 Use the second Serial Number or not ADD NODEBESN(Optional)RNC
UseOfHcs Use of HCS
ADD CELLHCS(Optional)
ADD
GSMCELL(Optional)
ADD
NRNCCELL(Optional) RNC
USEPPP Use PPP or not ADD NODEBESN(Mandatory) RNC
UserPercentage UserPercentage ADD CELLMBDRINTERRAT(Optional) RNC
UserPlnSharingOutOffset Percentage of User Plane Sharing Out Offset SET USERPLNSHAREPARA(Optional) RNC
UserPlnSharingOutThd Percentage of User Plane Sharing Out threshold SET USERPLNSHAREPARA(Optional) RNC
UserPriority User Priority
SET
SCHEDULEPRIOMAP(M
andatory)
SET
USERGBR(Mandatory)
SET
FACHBANDWIDTH(Man
datory)
SET
USERHAPPYBR(Mandato
ry)
RNC
USETRUNK Use TRUNK or not ADD NODEBESN(Mandatory) RNC
UT Rate unit ADD ATMTRF(Optional) RNC
VCI Bearing VCI ADD AAL2PATH(Mandatory) RNC
VCLTYPE VCL act type ACT VCLCC(Mandatory) RNC
VLANFlAG VLANID Flag
ADD SCTPLNK(Optional)
ADD IPPATH(Optional)
RNC
VLANID VLAN ID
ADD
VLANID(Mandatory)
ADD IPPATH(Mandatory)
ADD
SCTPLNK(Mandatory)
ADD ETHMA(Mandatory)
RNC
VLANPRI VLAN Priority SET DSCPMAP(Optional) RNC
VOICEDL AMR voice service downlink factor ADD TRMFACTOR(Optional) RNC
VOICEPRIPATH AMR voice primary path ADD TRMMAP(Optional) RNC
VOICEPRITH AMR voice pri path load threshold ADD LOADEQ(Optional) RNC
VOICESECPATH AMR voice secondary path ADD TRMMAP(Optional) RNC
VOICESECWHT AMR voice pri sec path load ratio threshold ADD LOADEQ(Optional) RNC
VOICEUL AMR voice service uplink factor ADD TRMFACTOR(Optional) RNC
VoipChlType VOIP channel type SET FRCCHLTYPEPARA(Optional) RNC
VoipHsupaTti HSUPA TTI type of VOIP traffic SET FRC(Optional) RNC
VOL24_MASK Enable Alarm Reporting for 24V Power ADD EMU(Optional) RNC
VOL24_THD_HIGH Upper Limit of Alarm for 24V Power ADD EMU(Optional) RNC
VOL24_THD_LOW Lower Limit of Alarm for 24V Power ADD EMU(Optional) RNC
VOL48_MASK Enable Alarm Reporting for 48V Power ADD EMU(Optional) RNC
VOL48_THD_HIGH Upper Limit of Alarm for 48V Power ADD EMU(Optional) RNC
VOL48_THD_LOW Lower Limit of Alarm for 48V Power ADD EMU(Optional) RNC
VPCLCXN Cross connect index ADD VPCLCX(Optional) RNC
VPI Bearing VPI ADD AAL2PATH(Mandatory) RNC
VPLimitInd Cell VP limit indicator
ADD
QUICKCELLSETUP(Optio
nal)
ADD
CELLSETUP(Optional)
ADD
NRNCCELL(Optional)
RNC
VPQosPerform QOS Switch For VP Traffic SET QOSACT(Optional) RNC
VpRabAbnormRelRatioThd VP call drop ratio Per Spu SET KPIALMTHD(Optional) RNC
VpRabEstAttMinNum The minimum of VP Rab attempt setup Per Spu SET KPIALMTHD(Optional) RNC
VpRabEstSuccRatioThd VP Rab successful setup ratio Per Spu SET KPIALMTHD(Optional) RNC
VpRabRelMinNum The number of VP drop Per Spu SET KPIALMTHD(Optional) RNC
WAmrUlRateAdjTimerLen Wait Timer For WAMR Uplink SET QOSACT(Optional) RNC
WATER_MASK Enable Water Alarm Reporting ADD EMU(Optional) RNC
Weight Weighted factor
ADD
CELLINTRAFREQHO(Op
tional)
SET
INTRAFREQHO(Optional)
RNC
WeightForUsedFreq Weight for Used frequency
ADD
CELLINTERFREQHOCO
V(Optional)
SET
INTERFREQHOCOV(Opti
onal)
ADD
CELLINTERRATHOCOV
(Optional)
SET
INTERRATHOCOV(Optio
nal)
RNC
WINDOWSIZE Receiving window size ADD SAALLNK(Optional) RNC
WKMODE Work mode ADD M3LKS(Optional) RNC
WORKAREA Work area flag FMT DATA(Optional) RNC
WORKMODE Work Mode SET E1T1(Optional) RNC
WTRT WTR Time SET MSP(Optional) RNC
XOffset X Offset SET RNCMBMSPARA(Optional) RNC
ZeroRateUpFailToRelTimerLen Release 0 kbit/s Timer length for failed to rate up SET COIFTIMER(Optional) RNC
ZONET TimeZone SET TZ(Optional) RNC
Meaning Value Type GUI Value Range
The type of service carried by the AAL2 path that users expect. Enumeration Type R99, HSPA, SHARE
This parameter specifies the time to execute re-host policy for the primary hosted NodeB, after the RNC recovers from disaster and starts to operate. Compound Type hour, min, sec
It defines the mapping of AC 0~9 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
It defines the mapping of AC 10 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
It defines the mapping of AC 11 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
It defines the mapping of AC 12 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
It defines the mapping of AC 13 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
It defines the mapping of AC 14 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
It defines the mapping of AC 15 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 0~7
Identifying an ASC. Enumeration Type ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7
This parameter specifies whether to enable the address and control fields compression switch. Enumeration Type Disable, Enable
Interval of automatic access classes restriction between cells. When a subsystem of an RNC performs access classes restriction on cells managed by this subsystem, it selects the first cell at random. After waiting for the time specified in this parameter, the subsystem selects the second cell and the first cell is still with access classes restriction. The process lasts until all the cells are going through access classes restriction. For detailed information of this parameter, refer to 3GPP TS 22.011. Interval Type 1~36000
Specifies the interval between consecutive pollings imposed on the PS domain and CS domain in different cells according to the flexible polling restriction mode. Interval Type 1~36000
Specifies the restricted access class according to the flexible polling restriction mode. Bit Field Type AC0(Access Class 0 Restriction), AC1(Access Class 1 Restriction), AC2(Access Class 2 Restriction), AC3(Access Class 3 Restriction), AC4(Access Class 4 Restriction), AC5(Access Class 5 Restriction), AC6(Access Class 6 Restriction), AC7(Access Class 7 Restriction), AC8(Access Class 8 Restriction), AC9(Access Class 9 Restriction), AC10(Access Class 10 Restriction), AC11(Access Class 11 Restriction), AC12(Access Class 12 Restriction), AC13(Access Class 13 Restriction), AC14(Access Class 14 Restriction), AC15(Access Class 15 Restriction)
Specifies the access classes that are restricted according to the fixed restriction mode. Bit Field Type AC0(Access Class 0 Restriction), AC1(Access Class 1 Restriction), AC2(Access Class 2 Restriction), AC3(Access Class 3 Restriction), AC4(Access Class 4 Restriction), AC5(Access Class 5 Restriction), AC6(Access Class 6 Restriction), AC7(Access Class 7 Restriction), AC8(Access Class 8 Restriction), AC9(Access Class 9 Restriction), AC10(Access Class 10 Restriction), AC11(Access Class 11 Restriction), AC12(Access Class 12 Restriction), AC13(Access Class 13 Restriction), AC14(Access Class 14 Restriction), AC15(Access Class 15 Restriction)
Specifies the interval delay between consecutive pollings according to the flexible polling restriction mode. Interval Type 6~3600
Access restriction ratio. When a cell performs access classes restriction, you can select some access classes from AC0 to AC9 based on the ratio specified in this parameter and perform access classes restriction on the selected access classes. After access classes restriction goes on for AcRstrctIntervalLen, the original access classes restriction is released and other access classes of the local cell are selected for access classes restriction based on the ratio specified in this parameter. Interval Type 1~10
OFF indicates that the AC algorithm is automatically disabled. ON indicates that the AC algorithm is automatically enabled. Enumeration Type OFF, ON
This parameter specifies the license file to be activated. "Local" indicates the local license file is activated, and "SHARE" indicates that the shared value is activated. Enumeration Type LOCAL(Local File), SHARE(Share Value)
This parameter specifies the type of the GPS assistance data to be activated. Enumeration Type GPS(Global Position System), DGPS(Differential Global Position System), BOTH(both GPS and DGPS)
This parameter specifies the CPU usage to be increased. Interval Type 1~95
The activity factor at the radio layer varies with the service priority. The configuration of the activity factor is performed based on the priorities of gold, silver, and copper. The activity factor of SRB is priority insensitive. Enumeration Type NOPRIORITY(NOPRIORITY), GOLD(GOLD), SILVER(SILVER), COPPER(COPPER)
Flag of A-GPS location activation. Enumeration Type INACTIVE, ACTIVE
This parameter indicates whether the GPS Additional Assistance Data Request is sent when the A-GPS method is used. Enumeration Type NODELIVERY, DELIVERY
UE positioning mode when the A-GPS method is selected. The UE supports both UE-based A-GPS mode and UE-assisted A-GPS mode. Enumeration Type UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_ASSISTED_PREFERRED
This parameter specifies a GPS reference receiver. Interval Type 0~65534
This parameter specifies the type of the GPS reference receiver. A GPS reference receiver can be configured on the local RNC, a NodeB of the local RNC, or a neighboring RNC. Enumeration Type RNC(Local RNC), NODEB(Local NodeB), NRNC_RNC(Nearby RNC), NRNC_NODEB(NodeB in RNC)
Difference between the transmit power of AICH and that of PCPICH. If the value is set too small, the UEs on the cell edge cannot receive the acquisition indication properly. This problem affects the coverage of the downlink common channel and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For details, refer to the 3GPP TS 25.433 protocol. Interval Type -22~5
Transmission timing information of an AICH. "0" indicates that there are 7680 chips offset between the access preamble of the PRACH and AICH. "1" indicates that there are 12800 chips offset between them. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~1
This parameter specifies the alarm ID of the alarm configuration record to be modified. Interval Type 1~65535
This parameter specifies whether the configured HS-SCCH Less Operation parameters adopt the octet_align or bit_align mode. Enumeration Type BIT_ALIGN(Bit aligned mode), OCTET_ALIGN(Octet aligned mode)
The unit is kbps. This parameter is valid only when Transport Resource Group Type is IP and Bandwidth mode is HALF_DUPLEX. Interval Type 0~4000000
If Manual is chosen, allocating [Code Number for HS-PDSCH] the equal of configured HS-PDSCH code number. If Automatic is chosen, allocating HS-PDSCH code number between configured HS-PDSCH Maximum code number and HS-PDSCH Minimum code number. At the early stage of network construction, or when the traffic model of subscribers in a cell is not fixed, the parameter can be set to Automatic to have the HSDPA channel codes be automatically allocated. If the traffic model of subscribers in a cell is fixed and known, the parameter can be set to Manual to select the static allocation mode. Manual allocation leads to restriction of HSDPA code resource or leaves HSDPA code resource idle. For detailed information of this parameter, refer to 3GPP TS 25.308. Enumeration Type Manual(Manual), Automatic(Automatic)
This parameter specifies the antenna altitude of the GPS reference receiver. Interval Type -1000~10000
This parameter specifies the antenna altitude of the GPS reference receiver. (IMP unit: Feet) Interval Type -3281~32810
This parameter specifies the alarm severity to be set. Enumeration Type Critical(Critical), Major(Major), Minor(Minor), Warning(Warning)
Maximum number of times for event 2B retry.
This parameter defines the number of times for event
2B retry when the measurement control is valid. The
larger the value of this parameter, the larger the
number of times for inter-frequency handover retry,
and the higher probability for the UE to be
successfully handed over to the target cell whose load
is restored. After the maximum number of times for
event 2B retry, the RNC sends the inter-frequency
measurement control message again to hand over the
UEs to the other cells of this frequency.
If the measurement control message is released, the
retry will be immediately stopped.
Interval Type 0~63
Maximum retry times of the event 2C.
This parameter defines the number of times for event
2C retry when the measurement control is valid.
The larger the value of this parameter, the larger the
number of times for inter-frequency handover retry,
and the higher probability for the UE to be
successfully handed over to the target cell whose load
is restored. When the retry times reaches the
maximum value, the RNC stops the retry process. Or
if the measurement control message is released, the
retry will be immediately stopped.
Interval Type 0~63
Maximum retry times of the event 3A.
This parameter defines the number of times for event
3A retry when the measurement control is valid. The
larger the value of this parameter, the larger the
number of times for inter-RAT handover retry, and
the higher probability the UE is successfully handed
over to the target cell whose load is restored. When
the retry times reaches the maximum value, the RNC
stops the retry process. Or if the measurement control
message is released, the retry will be immediately
stopped.
Interval Type 0~63
Maximum retry times of the event 3C.
This parameter defines the number of times for event
3C retry when the measurement control is valid. The
larger the value of this parameter, the larger the
number of times for inter-RAT handover retry, and
the higher probability the UE is successfully handed
over to the target cell whose load is restored. When
the retry times reaches the maximum value, the RNC
stops the retry process. Or if the measurement control
message is released, the retry will be immediately
stopped.
Interval Type 0~63
This parameter specifies to edit sender parameters, receiver parameters, or flow control parameters. Enumeration Type SENDER_PARA, RECEIVE_PARA, FLOWCONTROL_PARA
When the parameter is set to YES, the QOS control algorithm is used for AMR services. When the parameter is set to NO, the QOS control algorithm is not used for AMR services.The QOS actions of AMR services include rate downsizing, inter frequency handover and inter rat handover. Enumeration Type NO, YES
AMR CDR(Call Drop Ratio) Per Spu, if the ratio is higher than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
The minimum number of AMR service attempt Per Spu, the sum of AMR service attempt need to be higher than this threshold to arise KPI alarm which type is AMR service successful setup ratio. Interval Type 0~65534
Successful AMR service setup ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
The Minimum number of AMR release Per Spu, the sum of AMR release need to be higher than this threshold to trigger arise KPI alarm which type is AMR call drop ratio. Interval Type 0~65534
Timer for triggering a second adjustment of the UL
AMR mode. This parameter specifies the duration of
waiting for the voice quality enhanced
acknowledgement after the UL AMR mode
adjustment when the associated command is
delivered.
The UL AMRC rate adjust timer starts when AMRC
mode adjustment procedure is triggered, and stops
when the next measurement report is received. If no
measurement report is received when the UL AMRC
timer expires, you can infer that the measured value
remains in the same state as that before the previous
UL AMRC mode adjustment. The previous AMRC
mode adjustment is not effective, and another
adjustment is required. The longer the UL AMRC
timer is, the less frequently the AMRC mode is
adjusted. In addition, the response to measurement
reports becomes slower accordingly.
Interval Type 20~64000
ID of the adjacent node. An RNC can be configured with at most 2000 adjacent nodes. Interval Type 0~1999
Altitude of the cell antenna in the WGS-84 coordinates. This is a necessary parameter, controlled by MTRLGY and valid when MET~0(metric system).The value of this parameter has effect on the location result. Interval Type -32767~32767
Altitude of the cell antenna in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement).The value of this parameter has effect on the location result. Interval Type -107502~107502
Latitude of the cell antenna in the WGS-84
coordinates. The value corresponding to the latitude A
degrees B minutes C seconds is [A + (B/60) +
(C/3600)] / 0.000001.
For example, the value corresponding to the latitude
31 degrees 30 minutes 36 seconds is [31 + (30/60) +
(36/3600)] / 0.000001 = 31510000.
This is controlled by GCDF and valid when
DEG~0(degree format).The value of this parameter
has effect on the location result.
Interval Type -90000000~90000000
This parameter specifies the latitude of the cell
antenna in the WGS-84 coordinates. The input format
is ddd:mm:ss.ssss.
This is controlled by GCDF and valid when
SEC~1(degree, minute, second format).The value of
this parameter has effect on the location result. String Type -
Longitude of the cell antenna in the WGS-84
coordinates. The value corresponding to the longitude
A degrees B minutes C seconds is [A + (B/60) +
(C/3600)] / 0.000001.
For example, the value corresponding to the longitude
121 degrees 40 minutes 36 seconds is [121 + (40/60)
+ (36/3600)] / 0.000001 = 121676666. This is
controlled by GCDF and valid when DEG~0(degree
format).The value of this parameter has effect on the
location result.
Interval Type -180000000~180000000
Longitude of the cell antenna in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. String Type -
Coverage angle of a sector. For an omni-directional cell, the value is 360.The value of this parameter has effect on the location result. Interval Type 0~3600
Azimuth of the main lobe of the cell antenna (the counter-clockwise angle from the direction of the main lobe to the north).The value of this parameter has effect on the location result. Interval Type 0~3600
Access point(AP) cell indicator. When the indicator is TRUE, it indicates that the cell is AP cell. Enumeration Type TRUE, FALSE
Upper-layer application type of the SCTP link.At Iu-b Interface the Upper-Layer application type is NBAP,at Iu-r, Iu-PS and Iu-CS Interface the Upper-Layer application type is M3UA. Enumeration Type NBAP, M3UA
This parameter specifies the direction where the current typical RAB parameters are applied. Enumeration Type APPLIED_ON_UPLINK, APPLIED_ON_DOWNLINK, APPLIED_ON_BOTH
Area flag. Enumeration Type PRIMARY(Active Area), STANDBY(Standby area), ALL
This parameter specifies the flag of the active and standby areas. Enumeration Type PRIMARY(Primary), STANDBY(Standby), ALL
User_priority corresponding to Allocation/Retention priority 10. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 11. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 12. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 13. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 14. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 1. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 2. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 3. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 4. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 5. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 6. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 7. Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention
priority 8.
Enumeration Type Gold, Silver, Copper
User_priority corresponding to Allocation/Retention priority 9. Enumeration Type Gold, Silver, Copper
This parameter specifies the number of times the ARP resends after the specified time exceeds. Assume that "ARP packet resend times" is set to N. If the number of times no response is received after the ARP is resent for N times, the L3 DETECT FAIL alarm is reported. In the case of a key detect, the switchover of ports may be triggered. Interval Type 3~10
This parameter specifies the time-out value for the ARP packets. Interval Type 3~10
This parameter specifies the number of an ATM logical port. Interval Type 0~255
This parameter specifies the number of the slot bearing NodeB ATM transport. Interval Type 14~27
This parameter specifies the number of the subrack bearing NodeB ATM transport. Interval Type 0~5
Indicating whether attach/detach is allowed. NOT_ALLOWED indicates that MS cannot apply the IMSI attach/detach procedure. ALLOWED indicates that MS can apply the IMSI attach/detach procedure. It is valid only when [CN domain ID] is set as CS_DOMAIN. Enumeration Type NOT_ALLOWED, ALLOWED
This parameter specifies the authentication mode during PPP or MLPPP link negotiation. Enumeration Type SERVER, CLIENT
This parameter specifies the user name for PPP or MLPPP link negotiation. String Type -
This parameter specifies the password for PPP or MLPPP link negotiation. String Type -
This parameter specifies the authentication protocol type during PPP or MLPPP link negotiation. Enumeration Type NO_V, PAP_V, CHAP_V
This parameter specifies whether the auto negotiation
is enabled.
1. The auto negotiation must be enabled when "Board
type " is set to FG2a, and "Port type" is set to GE.
2. If the auto negotiation is enabled, the transmission
rate over the FE port, work mode, and flow control
mode depend on the negotiation results. If the auto
negotiation not disabled, you can set the transmission
rate over the FE port, work mode, and flow control
mode. In this case, ensure that the settings are the
same as those of the peer end; otherwise, transport
failure may occur.
3. If the auto negotiation is enabled at the local end,
the auto negotiation must be enabled at the peer end.
Enumeration Type ENABLE, DISABLE
Identifying the available signature end index of an ASC. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type 0~15
Identifying the available signature start index of an ASC. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type 0~15
Identifying the available sub channels of an ASC. When a UE has been accessed to a sub channel, if [AICH transmission timing] is set to 1 (using the command ADD AICH), the 4 bits of this parameter will be repeated 3 times to form a Bitstring (12). Then, it is put into an "and " calculation together with the Bitstring (12) corresponding to the available sub channel allocated to the PRACH, and a 12-bit data stream is obtained finally. If a bit is 1, the corresponding sub channel is available for this ASC. If [AICH transmission timing] is set to 0, the lowest 3 bits of this parameter will be repeated 4 times to form a Bitstring (12). Then, it is put into an "and" calculation together with the Bitstring (12) corresponding to the available sub channel allocated to the PRACH, and a 12-bit data stream is obtained finally. If a bit is 1, the corresponding sub channel is available for this ASC. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type 0~15
The Capability of CN node. Interval Type 0~65535
This parameter specifies the alarm level. Enumeration Type LOW(Low), HIGH(High)
This parameter specified the output switch of 8 kHz output clock 1. Enumeration Type OFF, ON
This parameter specified the output switch of 8 kHz output clock 2. Enumeration Type OFF, ON
If [Auto-Adaptive Background Noise Update Switch] is set to OFF, it is used to set background noise of the cell. If [Auto-Adaptive Background Noise Update Switch] is set to ON, new background noise is restricted by this parameter and [PARA]BgnAbnormalThd[/PARA]. For detailed information of this parameter, refer to the 3GPP TS 25.133. Interval Type 0~621
This parameter specifies the full path for saving the backup file. If the specified path is not a full path, then it will be treated as the relative path under "installation path in the BAM active workspace\BACKUP\". String Type -
This parameter specifies the IP address of the standby port. IP Address Type -
This parameter specifies the mask of the standby port. IP Address Type -
This parameter specifies the virtual IP address for the BAM external network. IP Address Type -
This parameter specifies the subnet mask of the BAM external network. IP Address Type -
Indicating the selected frequency Band in the cell setup process. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
This parameter specifies the maximum available bandwidth for each traffic class in the Cell_FACH state with the downlink HSDSCH in use. If the actual data flow exceeds the maximum bandwidth, the traffic is buffered so that the buffer occupancy is increased. As a result, the state transition from Cell-FACH to DCH occurs. This parameter should be set according to the traffic class. Interval Type 1~1000
Uniquely identifying a neighboring base station with the same carrier. Interval Type 0~7
Identifying BCCH frequency number of the inter-
RAT cell.
BCCH: Broadcast Control Channel
GSM1900
Frequency number: (511-811)
GSM1800
Frequency number: (511-866)
GSM900
Frequency number: (0-125) or (954-1024)
GSM850
Frequency number: (127-252)
GSM450
Frequency number: (258-294)
GSM480
Frequency number: (305-341)
Interval Type 0~1023
This parameter specifies the transmission power of the HS-PDSCH that sends the data carried on the BCCH. When UE receive data from the HS-PDSCH in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HS-PDSCH. Interval Type -350~150
When UE is in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HS-PDSCH. Meanwhile, the HS-SCCH shall send signaling related to HS-PDSCH. This parameter specifies the transmission power of the HS-SCCH at the time. Interval Type -350~150
Offset of the BCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receive the system messages properly. This problem affects the coverage of the downlink common channel and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For detailed information of this parameter, refer to 3GPP TS 25.433 and TS 25.331. Interval Type -350~150
This parameter specifies the bearer type of the
service.
- R99: The service is carried on a non-HSPA channel.
- HSPA: The service is carried on an HSPA channel. Enumeration Type R99, HSPA
Indicating the bear type of the DSP is MTP3 or M3UA.Enumeration Type MTP3, M3UA
HeatBeat Sending Time Interval. Interval Type 1~10
HeatBeat Sending Time Interval. Interval Type 1~10
HeatBeat Sending Time Interval. Interval Type 1~60
The bit rate threshold used to determine whether to perform soft handover for the Best Effort (BE) service on DCH. If current DL DCH bit rates of all the BE services of a user are lower than or equal to this threshold, the system will perform soft handover for this user to guarantee the service quality. When the velocity of the downlink DCH exceeds the restriction of this parameter, RNC will perform intra-frequence hard handover. To avoid the great effect of the system capacity when multi-links transmit a great deal of the same data in the macro diversity. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
Timer for state transition from CPC_HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Interval Type 1~65535
Timer for state transition from CPC_HS-DSCH to FACH of BE services, used to detect whether a BE UE in CELL_DCH(with CPC_HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Interval Type 1~65535
Timer for state transition from DCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with DCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Interval Type 1~65535
Timer for state transition from DCH to FACH of BE services, used to check whether the UE in the CELL_DCH state with non-real-time services is in the stable low activity state. If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model. Interval Type 1~65535
The first action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO
The second action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO
The third action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO
Timer for state transition from E-DCH to FACH of BE services, used to check whether the UE with BE services carried over the E-DCH is in the stable low activity state. If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model. Interval Type 1~65535
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from E_FACH to CPC. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to CPC. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from E_FACH to DCH. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to DCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from E_FACH to HS-DSCH. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to HS-DSCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to E-DCH with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to HS-DSCH with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to HS-DSCH with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to DCH. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to DCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to E-DCH. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to HS-DSCH. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to HS-DSCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Timer for state transition from FACH to PCH of BE services, used to check whether the UE in the CELL_FACH state is in the stable low activity state. When this parameter is set to 65535, it is regarded that the state transition from FACH to PCH is not performed. If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the common channel resources are wasted. This parameter should be set on the basis of the BE service model. Interval Type 1~65535
Timer for state transition from HS-DSCH to E_FACH of BE services, used to detect whether a BE UE in CELL_DCH(with HS-DSCH) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the BE service model. Interval Type 1~65535
Timer for state transition from HS-DSCH to FACH of BE services, used to check whether the UE in the CELL_DCH(with HS-DSCH) state with BE services is in the stable low activity state. If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model. Interval Type 1~65535
Pending time after the traffic volume event 4B is reported. This parameter is used to prevent too many traffic volume events 4B being reported. Enumeration Type D250, D500, D1000, D2000, D4000, D8000, D16000
This parameter is used to check whether the UE in the low activity state. If the UE is on HS-DSCH channel, the low activity counter increases by 1 every time traffic volume event 4B is reported. Enumeration Type D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the rate threshold of 2ms TTI on the E-DCH for HSUPA BE service. When the cell capability and UE capability allows 2ms TTI, 2ms TTI on the E-DCH is used if the PS BE service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880
Timer for rejecting rate increase after rate decrease is performed across the Iur interface for BE services. If the best cell is on the DRNC, the timer starts when rate decrease based on RLC retransmission is triggered. Before the timer expires, requests for rate increase triggered by DL traffic volume event 4A will be rejected. Interval Type 0~1024
The ralative power margin of single BE traffic, used to calculate the triggering threshold of event F, can avoid the fluctuation of traffic rate in case the power becomes restricted after rate is increased. Interval Type 0~100
When the parameter is set to YES, the QOS control algorithm is used for BE services. When the parameter is set to NO, the QOS control algorithm is not used for BE services.The QOS actions of BE services include rate downsizing, inter frequency handover and inter rat handover. Enumeration Type NO, YES
This parameter specifies the power occupancy of the control part of reference TFC. For details of this parameter, refer to the 3GPP TS 25.214. Interval Type 1~15
This parameter specifies the power occupancy of the data part of reference TFC. For details of this parameter, refer to the 3GPP TS 25.214. Interval Type 1~15
The first action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO
The second action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO
The third action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Enumeration Type None, RateDegrade, InterFreqHO, InterRatHO
For BE service, When the parameter is set to SINGLE, an UL event 6A1 or 5A can independently trigger the QOS enhancement action. The 6A1, 5A switch settings decide whether to perform 6A1 or 5A measurement control. When the parameter is set to COMBINE, only combined events 6A1+5A can trigger the QOS enhancement action, and whether to perform 6A1 and 5A measurement is not controlled by the 6A1 and 5A measurement switch. Enumeration Type SINGLE, COMBINE
Event 5A measurement switch when BeUlEvTrigInd is set to SINGLE for BE service. If this parameter is set to YES, event 5A measurement is delivered. Enumeration Type NO, YES
Event 6A1 measurement switch when BeUlEvTrigInd is set to SINGLE for BE service. If this parameter is set to YES, event 6A1 measurement is delivered. Enumeration Type NO, YES
UL event 6D measurement switch for BE service. If this parameter is set to YES, event 6D measurement is delivered. Enumeration Type NO, YES
Timer to trigger the next QoS enhancement action for
UL BE services. This parameter specifies the duration
of waiting for the UL QoS enhanced
acknowledgement after UL rate adjustment.
The timer starts when the BE UL rate adjustment
procedure is triggered, and stops when the RNC
receives a 6B1/6B2 event or when the timer expires.
Interval Type 20~64000
This parameter specifies the number of times the BFD packets time out. If several consecutive packets are not received, the BFD session is regarded as down. Interval Type 3~10
The MAC-c flow on the Iub interface will increase after Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends background service data on the Iub interface. Interval Type 1~1000
The MAC-c flow on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends background service data on the Iub interface. Interval Type 1~2000
This parameter is applied when [PARA]BGNSwitch[/PARA] is set to ON. (1) If the difference of measured background noise without filtered and the current background noise is larger than the RTWP threshold, the background noise will not be updated. (2) If the difference of new background noise and the configured value is larger than the RTWP threshold, the background noise will not be updated. Interval Type 1~400
Only when the measured background noise's duration reaches this parameter, the output of the auto-adaptive background noise update filter could be regarded as effect background noise, and the current value is replaced with the new one. At the same time, the auto-adaptive status should be restarted; otherwise, the output could not be regarded as the effective background noise. Interval Type 1~6000
(1) This parameter, along with the [Algorithm start
time], is used to limit the validation time of the
background noise automatic updata algorithm. If
[Algorithm stop time] is greater than [Algorithm start
time], and the background noise automatic updata
algorithm is enabled, then the algorithm is activated
during the period of [Algorithm stop time] to
[Algorithm start time] each day. In other periods, the
algorithm fails. If [Algorithm stop time] is less than
[Algorithm start time], and the background noise
automatic updata algorithm is enabled, then the
algorithm is activated during the period of [Algorithm
stop time] each day to [Algorithm start time] of the
next day. In other periods, the algorithm fails.
(2) Input format: HH&MM&SS.
Compound Type hour, min, sec
When the number of uplink equivalent users is not larger than this parameter, the RTWP could be regarded as background noise. Therefore, the measured RTWP could be input to the auto-adaptive background noise update filter; otherwise, the RTWP could not be regarded as background noise, and should not be input to the filter, and at the same time, the auto-adaptive status should be reset. Interval Type 0~10
(1) This parameter, along with the [Algorithm stop
time], is used to limit the validation time of the
background noise automatic updata algorithm. If
[Algorithm stop time] is greater than [Algorithm start
time], and the background noise automatic updata
algorithm is enabled, then the algorithm is activated
during the period of [Algorithm stop time] to
[Algorithm start time] each day. In other periods, the
algorithm fails. If [Algorithm stop time] is less than
[Algorithm start time], and the background noise
automatic updata algorithm is enabled, then the
algorithm is activated during the period of [Algorithm
stop time] each day to [Algorithm start time] of the
next day. In other periods, the algorithm fails.
(2) Input format: HH&MM&SS.
Compound Type hour, min, sec
When the parameter is 'OFF', the auto-adaptive background noise update algorithm is switched off. Otherwise, the algorithm is switched on. Enumeration Type OFF, ON
The difference of RTWP that trigger the update of background noise. If the difference is larger than the threshold, the background will be updated. Interval Type 1~100
This parameter specifies the target transmission quality of DCH, that is, target BLER of DCH on the radio interface if the subflow is carried on DCH. This QoS-related parameter is used by the CRNC to determine the target SIR value for use in admission and power control. To calculate the value of this parameter, obtain the result of 10*Lg(BLER) where the BLER refers to the actual BLER, and then round the result up. Interval Type -63~0
Indicating whether to perform blind handover.
FALSE: The cell is not in the alternative cells for
blind handover, so blind handover to this cell cannot
be triggered.
TRUE: The cell is in the alternative cells for blind
handover, so blind handover to this cell might be
triggered.
Enumeration Type FALSE, TRUE
This parameter is used in the algorithm of the load reshuffling (LDR) intra-frequency blind handover. This parameter defines how many measurement reports are needed for making the blind handover decision. The RNC starts blind handover only if the UE continuously reports adequate intra-frequency measurement reports that meet the quality requirements of blind handover. During the measurement process, if the UE reports an unqualified measurement report, the process ends. And the RNC does not start blind handover on the target cell. Enumeration Type D1, D2, D4, D8
This parameter specifies the intra-frequency measurement report interval of blind handover. It determines the intra-frequency measurement reporting interval of Load Reshuffling (LDR) blind handover. The smaller the value of this parameter, the smaller the intra-frequency measurement reporting interval, and the smaller the time for intra-frequency measurement. But the greater the influence of signal fluctuation, which can result in wrong handover. On the contrary, the larger the value of this parameter, the longer the intra-frequency measurement reporting interval, and the less the influence of signal fluctuation, which can improve the possibility of successful blind handover. But if the time for intra-frequency measurement becomes long, the handover may not be performed timely. Enumeration Type D250, D500
Indicating the priority of blind handover.
The value 0 represents the highest priority. Priorities
0~15 are assigned to concentric neighboring cells,
which can ensure successful handover. Priorities
16~30 are assigned to neighboring cells for blind
handover, which cannot ensure successful handover.
Interval Type 0~30
Blind handover condition.
If the value is not -115, the handover is defined as
Conditional Blind HO, which is used for the inter-
frequency neighboring cells of the same coverage.
If the value is -115, the handover is defined as Direct
Blind HO, which is used for the inter-frequency
neighboring cells of larger coverage.
Interval Type -115~-25
This parameter specifies the quality threshold for the
event 1F reported cell to trigger blind handover. This
parameter defines the lowest quality threshold of the
emergency blind handover. The blind handover is
implemented only if the signal quality in the cell,
which reports event 1F, exceeds the specified
threshold. Otherwise, the report will be discarded.
This parameter is set to raise the possibility of
successful blind handover. If the signal quality in the
cells that report event 1F are all very poor, this
indicates that the user is located at the edge of
coverage area. Under this condition, if the blind
handover is initiated rashly, the possibility of call drop
increases.
Interval Type -115~-25
This timer is started when an AAL2 signaling entity sends the peer node a request for blocking an AAL2 path. Interval Type 2000~60000
This parameter specifies the flag for reporting the alarm to the alarm box. Enumeration Type nonrpt(Not Report), rpt(Report)
This parameter specifies the board class. Enumeration Type INT, DPU, XPU
This parameter specifies the type of a board. Enumeration Type PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, SPUa, DPUb
This parameter specifies the type of a board. Enumeration Type FG2a, GOUa
This parameter specifies the type of a board. Enumeration Type PEUa, POUa, UOIa
This parameter specifies the type of a board. Enumeration Type PEUa, POUa
Base Station Identity Code (BSIC) verification
switch.
1. BSIC(Base Station Identity Code): identity code of
the base station.
2. This parameter is used to control cells where inter-
RAT measurement reports are triggered. When the
value is REQUIRED, the measurement report is
triggered after the BSIC of the measured cell is
deciphered correctly; when the value is
NOT_REQUIRE, measurement reporting is triggered
whatever the BSIC is deciphered or not, if the
measured cell meets the reporting conditions. This
parameter is valid for both periodical report mode and
event report mode. To ensure the reliability of
handovers, the system reports only the cells of which
the BSIC is correctly decoded, that is, the
recommended value of the parameter is REQUIRED.
If the parameter is set to NOT_REQUIRED,
handovers occur more easily, the setting of
REQUIRED is of higher reliability for the handovers,
though.
Enumeration Type REQUIRED(Verify mode), NOT_REQUIRE(Non-verify mode)
This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa
This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa
This parameter specifies the type of a board. Enumeration Type PEUa(PEUa), AEUa(AEUa), AOUa(AOUa), POUa(POUa)
This parameter specifies the type of the board where the command is executed. Enumeration Type SCUa, GCUa, GCGa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, ALL
This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa, UOIa
This parameter specifies the type of a board. Enumeration Type AEUa, PEUa, AOUa, POUa
This parameter specifies the type of the board to be set.Enumeration Type SCUa, GCUa/GCGa, SPUa, DPUb, AEUa/PEUa/AOUa/UOIa/FG2a/GOUa/POUa, MPU
This parameter specifies the type of a board. Enumeration Type AEUa, AOUa
This parameter specifies the type of a board. Enumeration Type AOUa, POUa, UOIa
This parameter specifies the type of a board. Enumeration Type AEUa, AOUa, UOIa
This parameter specifies whether the dynamic bandwidth adjustment switch for the logical port is turned on. The function must be used together with IPPM. Enumeration Type OFF, ON
When the remaining receive bandwidth is smaller than or equal to this parameter value, the backward congestion alarm is triggered. Interval Type 0~1000000
This parameter specifies the backward congestion threshold. When the remaining bandwidth reaches this parameter value, the backward congestion alarm is reported. Interval Type 0~100000
This parameter specifies the remaining bandwidth threshold for generating the backward congestion alarm. Interval Type 0~149000
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted. Interval Type 0~320000
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted. Interval Type 0~3000000
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted. Interval Type 0~4000000
When the remaining receive bandwidth is greater than this parameter value, the backward congestion alarm is cleared. Interval Type 0~1000000
This parameter specifies the backward congestion clear threshold. When the remaining bandwidth reaches this parameter value, the backward congestion alarm is cleared. Interval Type 0~200000
This parameter specifies the remaining bandwidth threshold for clearing the backward congestion. Interval Type 0~149000
If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared. Interval Type 0~320000
If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared. Interval Type 0~3000000
If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared. Interval Type 0~4000000
This parameter specifies the receive bandwidth reserved for the user in handover. Interval Type 0~1000000
This parameter specifies the backward handover reserved bandwidth. It is the receive bandwidth reserved for the user in handover. Interval Type 0~50000
This parameter specifies the bandwidth reserved for the backward handover. Interval Type 0~149000
Reserved backward bandwidth for handover user. Interval Type 0~320000
Reserved backward bandwidth for handover user. Interval Type 0~3000000
Reserved backward bandwidth for handover user. Interval Type 0~4000000
This parameter specifies the maximum bandwidth estimate ratio. It is the ratio of the bandwidth of each rate up to the current bandwidth. Interval Type 100~1000
Bandwidth mode.This parameter is valid only when Transport Resource Group Type is IP. Enumeration Type FULL_DUPLEX, HALF_DUPLEX
This parameter specifies the bandwidth change threshold of the load control algorithm. When the bandwidth adjustment exceeds this threshold, the bandwidth of the logical port is updated. Interval Type 0~100
The parameter values are described as follows:
NODEB_CREDIT_CAC_SWITCH: The system
performs CAC based on the usage state of NodeB
credit. When the NodeB's credit is not enough, the
system rejects new access requests. Bit Field Type NODEB_CREDIT_CAC_SWITCH(NodeB Credit CAC Switch)
Indicating whether to control call shock. Bit Field Type SYS_LEVEL(SYS_LEVEL), NODEB_LEVEL(NODEB_LEVEL), CELL_LEVEL(CELL_LEVEL)
Indicating the period of call shock control judging. Interval Type 1~5
Decide which carrier is prior when ARP and TrafficClass are both identical. Enumeration Type NONE, DCH, HSPA
Number of the subrack from which the AAL2 Path is led out of RNC. Interval Type 0~5
This field indicate whether the IP Path is carried on IP logic port or resource group or null. Enumeration Type NULL, IPLGCPORT, RSCGRP
This parameter specifies the number of the fractional ATM link bearing PVC. The fractional ATM link must have been configured. Interval Type 0~31
This parameter specifies the number of the IMA group bearing the PVC. The IMA group must have been configured. Interval Type 0~83
SAAL, SCTP, SAAL-SCTP. When the NCP is based on ATM, set Bearing link type to SAAL. When the NCP is based on IP, set Bearing link type to SCTP. When the NCP is based on ATM/IP, set Bearing link type to SAAL-SCTP. For detailed information of this parameter, refer to 3GPP TS 25.430. Enumeration Type SAAL(SAAL Link Type ), SCTP(SCTP Link Type), SAAL-SCTP(SAAL-SCTP Link Tpye)
This parameter specifies the number of the port on the UOIa_ATM bearing VCL. Interval Type 0~3
This parameter specifies the number of the optical port that carries the logical port. Interval Type 0~3
Number of the slot bearing the SAAL link. Interval Type 14~27
Number of the subrack bearing the SAAL link. Interval Type 0~5
This parameter specifies the bearing type of a logical port. Enumeration Type ETHER, PPP, TRUNK
This parameter specifies the bearing type of a logical port. If the bearing type of a logical port is ATM, the upper-level logical port must be a Hub logical port. Enumeration Type IMA, UNI, FRA, NCOPT, ATMLOGICPORT
Type of the bearer. Enumeration Type UNI, IMA, FRAATM, NCOPT, ATMLGCPORT, NULL
This parameter specifies the number of the UNI link bearing PVC. The UNI link must have been configured. Interval Type 0~167
The value of bearing VCI.VCI of the SAAL link that goes out of the RNC. Interval Type 32~65535
The value of bearing VPI.VPI of the SAAL link that goes out of the RNC. Interval Type 0~255
This parameter specifies the number of the ATM logic port bearing VCL. Interval Type 0~383
IP address of the CBC (Cell Broadcast Center). IP Address Type -
Mask of the sub-network of the CBC IP address. IP Address Type -
This parameter specifies the maximum burst size. Interval Type 4500~32767
A CBS Operator of the cell. Interval Type 0~3
Together with PLMN code and LAC, uniquely corresponding to a cell. Interval Type 0~65535
Switch of inner CBS. Enumeration Type OFF(OFF), ON(ON)
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends common control channel data on the Iub interface. Interval Type 1~1000
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends common control channel data on the Iub interface. Interval Type 1~2000
Common channel primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
Common channel bearing primary path load threshold. Interval Type 0~100
Common channel secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
Common channel primary secondary path load ratio threshold. Interval Type 0~100
This parameter specifies the period of sending the CCMs in an MA. Enumeration Type 10, 100, 1000
This parameter specifies the mode of activating the CC on the VCL. In AUTO mode, the CC need not be activated on the peer. Enumeration Type AUTO, MANUAL
Protection timer started after the BGN, END, RS or ER messages are sent.If the timer expires, these messages are resent. Interval Type 100~1000
This parameter specifies the delay variation that can be tolerated. Physical unit: 0.1 us. Interval Type 1024~13300000
When call shock control starts, the AMR_RRC number can be accessed per second for cell. Interval Type 1~100
Average altitude of the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type -32767~32767
This parameter specifies the average altitude of the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type -107502~107502
The algorithms with the above values represent are as
follow:
TX_DIVERSITY_ON_TO_OFF:When TX Diversity
is on to off,the algorithms of cell capacity auto handle
is open.
TX_DIVERSITY_OFF_TO_ON:When TX Diversity
is off to on,the algorithms of cell capacity auto handle
is open.
Bit Field Type TX_DIVERSITY_ON_TO_OFF(TX diversity capability is on to off), TX_DIVERSITY_OFF_TO_ON(TX diversity capability is off to on)
1)DELAY_ACTIVATION_SUPPORT (delay
activation support indicator):when the indicator is
TRUE, it means that the cell support delay activation.
Delayed Activation IE indicates that the activation of
the DL power shall be delayed until an indicated CFN
or until a separate activation indication is received.
2)HSDSCH_SUPPORT(HSDSCH support
indicator):when the indicator is TRUE, it means that
the cell support HSDSCH and enable downlink traffic
to be established in HSDSCH.
3)FDPCH_SUPPORT(F-DPCH support
indicator):when the indicator is TRUE, it means that
the cell support F-DPCH and enable downlink signal
to be established in F-DPCH, but the cell can not
support F-DPCH if it does not support HSDSCH.
4)EDCH_SUPPORT(E-DCH support indicator):when
the indicator is TRUE, it means that the cell support E-
DCH.
5)EDCH_2MS_TTI_SUPPORT(E-DCH 2ms TTI
support indicator):when the indicator is TRUE, it
means that the cell support E-DCH 2ms TTI.
6)EDCH_2SF2_AND_2SF4_SUPPORT(E-DCH max
SF support 2SF2+2SF4 indicator):when the indicator
is TRUE, it means that the cell has E-DCH SF
capability of 2SF2+2SF4.
7)EDCH_2SF2_SUPPORT(E-DCH max SF support
2SF indicator):when the indicator is TRUE, it means
that the cell has E-DCH SF capability of 2SF2.
8)EDCH_2SF4_SUPPORT(E-DCH max SF support
2SF4 indicator):when the indicator is TRUE, it means
that the cell has E-DCH SF capability of 2SF4.
9)EDCH_SF4_SUPPORT(E-DCH max SF support
SF4 indicator):when the indicator is TRUE, it means
that the cell has E-DCH SF capability of SF4.
Bit Field Type DELAY_ACTIVATION_SUPPORT(delay activation support indication), HSDSCH_SUPPORT(HSDSCH support indication), FDPCH_SUPPORT(F-DPCH support indication), EDCH_SUPPORT(E-DCH support indication), EDCH_2MS_TTI_SUPPORT(E-DCH 2ms TTI support indicator), EDCH_2SF2_AND_2SF4_SUPPORT(E-DCH max SF support 2SF2+2SF4 indicator), EDCH_2SF2_SUPPORT(E-DCH max SF support 2SF2 indicator), EDCH_2SF4_SUPPORT(E-DCH max SF support 2SF4 indicator), EDCH_SF4_SUPPORT(E-DCH max SF support SF4 indicator), EDCH_SF8_SUPPORT(E-DCH max SF support SF8 indicator), EDCH_HARQ_IR_COMBIN_SUPPORT(E-DCH support HARQ IR Combining indicator), EDCH_HARQ_CHASE_COMBIN_SUPPORT(E-DCH support HARQ CHASE Combining indicator), CPC_DTX_DRX_SUPPORT(CPC DTX-DRX support indicator), CPC_HS_SCCH_LESS_OPER_SUPPORT(CPC HS-SCCH less operation support indicator), HSPAPLUS_MIMO_SUPPORT(MIMO support indicator), HSPAPLUS_UL_16QAM_SUPPORT(uplink 16QAM support indicator), FLEX_MACD_PDU_SIZE_SUPPORT(flexible MAC-d PDU Size support indicator), FDPCH_SLOT_FORMAT_SUPPORT(F-DPCH s
Altitude of the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). Interval Type -32767~32767
This parameter specifies the altitude of the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). Interval Type -107502~107502
Latitude of the cell center in the WGS-84
coordinates. The value corresponding to the latitude A
degrees B minutes C seconds is [A + (B/60) +
(C/3600)] x 0.000001.
For example, the value corresponding to the latitude
31 degrees 30 minutes 36 seconds is [31 + (30/60) +
(36/3600)] x 0.000001 = 31510000.
This is controlled by GCDF and valid when
DEG~0(degree format).
Interval Type -90000000~90000000
This parameter specifies the latitude of the cell center in the WGS-84 coordinates. The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC~1(degree, minute, second format). String Type -
Longitude of the cell center in the WGS-84
coordinates. The value corresponding to the longitude
A degrees B minutes C seconds is [A + (B/60) +
(C/3600)] x 0.000001.
For example, the value corresponding to the longitude
121 degrees 40 minutes 36 seconds is [121 + (40/60)
+ (36/3600)] x 0.000001 = 121676666.
This is controlled by GCDF and valid when
DEG~0(degree format).
Interval Type -180000000~180000000
This parameter specifies the longitude of the cell
center in the WGS-84 coordinates. The input format is
ddd:mm:ss.ssss.
This is controlled by GCDF and valid when
SEC~1(degree, minute, second format). String Type -
Indicating the target cell choose method. Enumeration Type ALLCELL(All cell), 3GCELL(3G cell), GSMCELL(GSM cell)
Environment type of the cell coverage area. Enumeration Type NLOS_ENVIRONMENT, LOS_ENVIRONMENT, MIXED_ENVIRONMENT
Defining the radio environment type of the cell, such as a typical town cell, urban cell, and mountain area cell. Enumeration Type TU, RA, HT
Deviation of altitude standard in the cell coverage
area in the WGS-84 coordinates.
This is controlled by MTRLGY and valid when
MET~0(metric system). Interval Type -10000~10000
This parameter specifies the standard deviation of
altitude in the cell coverage area in the WGS-84
coordinates.
This is controlled by MTRLGY and valid when
IMP~1(British measurement). Interval Type -32808~32808
When call shock control starts, the register and 3G->2G reselect number can be accessed per second for cell. Interval Type 1~100
This parameter specifies the host type of a cell. Enumeration Type SINGLE_HOST, DOUBLE_HOST
Uniquely identifying a cell. For detailed information of this parameter, refer to 3GPP TS 25.401. Interval Type 0~65535
This parameter is valid when [Cell ID Changing Switch] is ON. Indicate the period of cell ID changing. Interval Type 1~31
Indicating whether to use changing cell id in UU interface. Enumeration Type OFF, ON
Flag of CELLID+RTT location activation. Enumeration Type INACTIVE, ACTIVE
UE positioning mode when the CELLID+RTT method is selected. The UE supports both UE-based CELLID+RTT mode and UE-assisted CELLID+RTT mode. Enumeration Type UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_ASSISTED_PREFERRED
Cell SF reserved threshold. The code load reshuffling could be triggered only when the minimum available SF of a cell is higher than this threshold. The lower the code resource LDR trigger threshold is, the easier the downlink code resource enters the initial congestion status, the easier the LDR action is triggered, and the easier the subscriber perception is affected. But a lower code resource LDR trigger threshold causes a higher admission success rate because the resource is reserved. Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256)
Cell location configuration type. Enumeration Type CELL_ANTENNA, CELL_CENTER, BOTH
Identifying a cell name. String Type -
If the cell downlink load exceeds this threshold, the algorithm will decrease the pilot transmit power of the cell so as to increase the whole system's capacity. This parameter is based on network planning. When the cell breathing algorithm is activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is expanded and interference over other cells is increased. Interval Type 0~100
If the times the UE in the CELL_PCH state performs cell reselection is greater than or equal to the threshold, it is regarded that the cell reselection is frequent. When the timer expires, the target state is set to URA_PCH. In the next cell update procedure, the UE is informed of state transition to URA_PCH in the CELL_UPDATE_CONFIRM message. Interval Type 1~65535
Length of the cell reselection frequency timer. This parameter is used together with CellReSelectCounter to detect the frequency of cell reselection of the UE in the CELL_PCH state. Interval Type 1~65535
Indicating whether the cell is reserved for extension. If [Cell barred indicator] is NOT_BARRED, and the cell is not reserved for operators but for extension, the UEs regard the cell as barred. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type RESERVED, NOT_RESERVED
Indicating whether the cell is reserved for operators. If [Cell barred indicator] is NOT_BARRED, and the cell is reserved for operators, the UEs allocated with Access Class 11 or 15 in the local PLMN can select or reselect the cell. While the UEs allocated with Access Class 0~9, 12 and 14 cannot select or reselect the cell. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type RESERVED, NOT_RESERVED
Flag of whether adding a cell into the active set will
affect the relative threshold of the event 1A.
This parameter is a flag of whether adding the cell
into the active set will affect the relative threshold of
the event 1A NOT_AFFECT: Adding the cell into the
active set does not affect the relative threshold of the
event 1A. AFFECT: Adding the cell into the active set
affects the relative threshold of the event 1A.
Enumeration Type AFFECT, NOT_AFFECT
Flag of whether adding a cell into the active set will
affect the relative threshold of the event 1B.
This parameter is a flag of whether adding the cell
into the active set will affect the relative threshold of
the event 1B NOT_AFFECT: Adding the cell into the
active set does not affect the relative threshold of the
event 1B. AFFECT: Adding the cell into the active set
affects the relative threshold of the event 1B.
Enumeration Type AFFECT, NOT_AFFECT
When the RRC REQ total number of one cell reach this threshold the RRC flow control will be triggered. Interval Type 1~100
If the cell downlink load is lower than this threshold, the algorithm will increase the pilot transmit power of the cell so as to share load of other cells. This parameter is based on network planning. When the cell breathing algorithm is activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is expanded and interference over other cells is increased. Interval Type 0~100
This parameter indicates whether RAC is configured. If the RNC supports the PS domain, the value of this parameter must be REQUIRE. Enumeration Type NOT_REQUIRE, REQUIRE
Channel configuration strategy switch.
1) CFG_DL_BLIND_DETECTION_SWITCH: When
the switch is on, the DL blind transport format
detection function is used for single SRB and
AMR+SRB bearers. Note that the UE is only required
to support the blind transport format stipulated in
3GPP 25.212 section 4.3.1.
2) CFG_HSDPA_64QAM_SWITCH: When the
switch is on, 64QAM can be configured for the
HSDPA service.
3) CFG_HSDPA_MIMO_SWITCH: When the switch
is on, MIMO can be configured for the HSDPA
service.
4) CFG_HSPA_DTX_DRX_SWITCH: When the
switch is on, DTX_DRX can be configured for the
HSDPA service.
5) CFG_HSPA_HSSCCH_LESS_OP_SWITCH:
When the switch is on, HS-SCCH Less Operation can
be configured for the HSDPA service.
6) CFG_IMS_SUPPORT_SWITCH: When the switch
is on and the IMS license is activated, the RNC
supports IMS signaling.
7)
CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITC
H: When the switch is on, DL lossless RLC PDU size
change is supported.
8) CFG_LOSSLESS_RELOC_CFG_SWITCH: When
the switch is on and the UE supports lossless
relocation, the RNC configures lossless relocation for
PDCP parameters if the requirements of RLC mode,
discard mode, and sequential submission are met.
Then, lossless relocation is used for the UE.
9) CFG_MULTI_RAB_SWITCH: When the switch is
on, the RNC supports multi-RABs combinations such
Bit Field Type CFG_DL_BLIND_DETECTION_SWITCH, CFG_HSDPA_64QAM_SWITCH, CFG_HSDPA_MIMO_SWITCH, CFG_HSPA_DTX_DRX_SWITCH, CFG_HSPA_HSSCCH_LESS_OP_SWITCH, CFG_IMS_SUPPORT_SWITCH, CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITCH, CFG_LOSSLESS_RELOC_CFG_SWITCH, CFG_MULTI_RAB_SWITCH, CFG_PDCP_IPV6_HEAD_COMPRESS_SWITCH, CFG_PDCP_RFC2507_HC_SWITCH, CFG_PDCP_RFC3095_HC_SWITCH
This parameter specifies the value of the handover protection timer. If services can be set up on channels based on a higher technique after channel handover is completed, the handover protection timer will be started. When the timer expires, the RNC will try to carry services on channels based on a higher technique. Channel retry cannot be performed before this timer expires. Interval Type 0~999
This parameter specifies the value of the channel retry timer. The timer will start after traffic is set up or reconfigured, if higher technique is available. Channel retry will be performed after this timer expires. If the value of the parameter is set to 0, channel retry cannot be performed. Interval Type 0~180
The coding type of a transport channel.For detailed information of this parameter, refer to 3GPP TS 25.212. Enumeration Type NO_CODING, CONVOLUTIONAL, TURBO
IP Path Ping Timeout Counts.The IP Path fault alarm will occur when the number of unsuccessful ping operation reaches this value. Interval Type 1~5
Channel index for MBMS performance. Enumeration Type CH0(Channel 0), CH1(Channel 1), CH2(Channel 2), CH3(Channel 3), CH4(Channel 4)
This parameter specifies the index of the BFD. The check index is unique. If the check index is not specified, a unique value ranging from 0 to 31 is automatically allocated. Interval Type 0~31
Whether to calculate the checksum during message receiving. Enumeration Type NO, YES
Whether to calculate the checksum during message sending. Enumeration Type NO, YES
According to RFC4960, ALDER32 is not suitable for checksum in SCTP, CRC32 is recommended. Enumeration Type ALDER32, CRC32
This parameter specifies the type of the check on gateway. Enumeration Type SBFD, ARP, MBFD
If you set this parameter to TEN_MSEC, use [DL basic meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [DL basic meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [DL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [DL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [HSDPA need pwr meas cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA need pwr meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA bit rate meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA bit rate meas cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TEN_MSEC, MIN
Value range: TEN_MSEC, MIN
Physical value range: 10 milliseconds, 1 minute
Content: If you set this parameter to TEN_MSEC, use
[UL basic meas rprt cycle,Unit:10ms] to specify the
measurement report period. If you set this parameter
to MIN, use [UL basic meas rprt cycle,Unit:min] to
specify measurement report period. For detailed
information of this parameter, refer to 3GPP TS
25.433.
Recommended value: TEN_MSEC
Enumeration Type TEN_MSEC, MIN
If you set this parameter to TEN_MSEC, use [UL OLC meas rprt cycle,Unit:10ms] to specify the measurement report period. If you set this parameter to MIN, use [UL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TEN_MSEC, MIN
This parameter specifies the reporting period of the event E of the AMR service. The unit of the reporting period can be 10 ms or minute. Enumeration Type TEN_MSEC, MIN
This parameter specifies the reporting period of the event E of the BE service. The unit of the reporting period can be 10 ms or minute. Enumeration Type TEN_MSEC, MIN
This parameter specifies the reporting period of the event F of the BE service. The unit of the reporting period can be 10 ms or minute. Enumeration Type TEN_MSEC, MIN
This parameter specifies the reporting period of the event E of the VP service. The unit of the reporting period can be 10 ms or minute. Enumeration Type TEN_MSEC, MIN
This switch determines whether to take statistics of the performance based on the MBMS channel. One MBMS service is defined as a channel for independent MBMS measurement. Enumeration Type OFF(OFF), ON(ON)
Identifying a GSM cell. Interval Type 0~65535
This parameter works with the offset of neighboring cell-oriented Cell Individual Offset (CIO). It is used for intra- or inter-frequency handover decisions. The larger the sum, the higher the handover priority of the neighboring cell. The smaller the sum, the lower the handover priority of the neighboring cell. Usually it is configured to 0. The larger the parameter, the easier of the handover to the neighboring cell. The smaller the parameter, the harder the handover to the neighboring cell. For details, refer to 3GPP TS 25.331. Interval Type -20~20
It is set according to the topographic feature.
This parameter is used for the inter-RAT handover
decision in combination with the neighboring cell
oriented CIO. The larger the sum, the higher the
handover priority of the GSM cell. The smaller the
sum, the lower the handover priority of the GSM cell.
The parameter is generally set to 0.
As for the impact on network performance:
The larger the value of the parameter is, the easier it is
to be handed over to the GSM network. The smaller
the value of the parameter is, the harder it is to be
handed over to the GSM network.
Interval Type -50~50
Cell individual offset for the GSM cell, which is set
according to the topographic feature.
This parameter is used for decision making for the
inter-RAT handover. The larger the value of the
parameter, the higher the handover priority of the
GSM cell. The smaller the value of the parameter, the
lower the handover priority of the GSM cell.
Interval Type -50~50
Neighboring cell oriented Cell Individual Offset
(CIO).
This parameter defines the neighboring cell oriented
cell individual offset. The set value functions in
combination of the cell oriented CIO. Their sum is
added to the measurement quantity before the UE
evaluated whether an event has occurred. In handover
algorithms, this parameter is used for moving the
border of a cell.
Interval Type -20~20
This parameter specifies the number of a logical port. Interval Type 1~1000
This parameter specifies the type of the clock board. Enumeration Type GCUa, GCGa
Indicating whether the Closed loop time adjust mode in the cell is supported. Enumeration Type TRUE, FALSE
This parameter specifies the startup direction of
compressed mode that the NodeB supports.
- UL_ONLY: The NodeB supports activation of
compressed mode only in the uplink.
- DL_ONLY: The NodeB supports activation of
compressed mode only in the downlink.
- UL_DL_BOTH: The NodeB supports activation of
compressed mode in both uplink and downlink.
Bit Field Type UL_ONLY, DL_ONLY, UL_DL_BOTH
CM type of the cell.
WALKING_SPEED_AND_HOT_SPOT_CELL,MID
_SPEED_AND_HOT_SPOT_CELL,HIGH_SPEED_
AND_HOT_SPOT_CELL,LOW_SPEED_AND_ME
DIUM_COVERAGE_CELL,HIGH_SPEED_AND_
MEDIUM_COVERAGE_CELL,LOW_SPEED_AN
D_HIGH_COVERAGE_CELL,HIGH_SPEED_AND
_HIGH_COVERAGE_CELL,PICO_NODEB_TYPE
_COVERAGE_CELL,OTHER_CELL
The CMCF parameters are configured on the basis of
the CM type of the cell. After that, the cell can specify
the number of CM sequences.
Enumeration Type WALKING_SPEED_AND_HOT_SPOT_CELL, MID_SPEED_AND_HOT_SPOT_CELL, HIGH_SPEED_AND_HOT_SPOT_CELL, LOW_SPEED_AND_MEDIUM_COVERAGE_CELL, HIGH_SPEED_AND_MEDIUM_COVERAGE_CELL, LOW_SPEED_AND_HIGH_COVERAGE_CELL, HIGH_SPEED_AND_HIGH_COVERAGE_CELL, PICO_NODEB_TYPE_COVERAGE_CELL, OTHER_CELL
CMCF algorithm switch.
1) CMCF_DL_HLS_SWITCH: When the switch is
on, the compressed mode supports DL higher-layer
scheduling.
2) CMCF_UL_HLS_SWITCH: When the switch is
on, the compressed mode supports UL higher-layer
scheduling.
3) CMCF_UL_PRECFG_TOLERANCE_SWITCH:
When the switch is on, the compressed mode of the
UE in the compressed mode pre-configuration state
can be different from that required by current traffic.
4)
CMCF_WITHOUT_UE_CAP_REPORT_SWITCH:
When the RNC starts inter-frequency or inter-RAT
measurement, the RNC checks the information of
whether the compressed mode is required for
measurement on the frequency band of the cells in
measurement list. The information should be reported
by the UE in RRC connect setup complete message.
When the switch is on and no such information has
been reported, the RNC starts the compressed mode
and then delivers the measurement.
Bit Field Type CMCF_DL_HLS_SWITCH, CMCF_UL_HLS_SWITCH, CMCF_UL_PRECFG_TOLERANCE_SWITCH, CMCF_WITHOUT_UE_CAP_REPORT_SWITCH
A timer to SRNC wait for the response to common transport channel resources request in the Iur common transport channel procedure. Interval Type 1~10000
Compatibility switch.
1)
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH
: When the switch is on, the IMS signaling assigned
by the CN undergoes compatibility processing as an
ordinary PS service. When the switch is not on, no
special processing is performed.
2)
CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITC
H: When the switch is on, the IUUP version can be
rolled back to R99 when complete configurations are
applied during inter-RAT handover.
3)
CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWI
TCH: When the switch is on, H2D is performed
before a neighboring RNC cell whose version is
earlier than R5 is added to the active set; E2D is
performed before a neighboring RNC cell whose
version is earlier than R6 is added to the active set. If
the DRNC is of a version earlier than R5, DL services
cannot be mapped on the HS-DSCH. If the DRNC is
of a version earlier than R6, DL services cannot be
mapped on the HS-EDCH.
4) CMP_IUR_SHO_DIVCTRL_SWITCH: When the
switch is on, the diversity combination over the Iur
interface is configured on the basis of that of the local
RNC. When the switch is not on, the diversity
combination over the Iur interface is configured on the
basis of services. The flag of diversity combination
over the Iur interface can be set to MUST (for BE
services) or MAY (for other services).
5) CMP_UU_AMR_SID_MUST_CFG_SWITCH:
For narrowband AMR services, when the switch is on,
the SID frame is always configured; when the switch
Bit Field Type CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH, CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITCH, CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWITCH, CMP_IUR_SHO_DIVCTRL_SWITCH, CMP_UU_AMR_SID_MUST_CFG_SWITCH, CMP_UU_DST_SERV_CELL_D2E_SWITCH, CMP_UU_IGNORE_UE_RLC_CAP_SWITCH, CMP_UU_SERV_CELL_CHG_WITH_ASU_SWITCH, CMP_UU_SERV_CELL_CHG_WITH_RB_MOD_SWITCH, CMP_UU_VOIP_UP_PROC_AS_NORMAL_PS_SWITCH, CMP_UU_FDPCH_COMPAT_SWITCH, CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH, CMP_IU_QOS_ASYMMETRY_IND_COMPAT_SWITCH
Identifying the type of a CN. Enumeration Type CS_DOMAIN, PS_DOMAIN
Identifying a CN node. Interval Type 0~4095
The status of the CN node. Enumeration Type NORMAL, OFFLOAD, INHIBITED
Mode of resource management. When the interface type is Iub, the value of this parameter could be SHARE or EXCLUSIVE mode. When the interface type is Iur,Iucs,Iups, the RNC supports only EXCLUSIVE mode. Enumeration Type SHARE, EXCLUSIVE
This parameter specifies the index of an operator. Interval Type 0~3
Uniquely identifying Cn operator name. String Type -
Identify a Operator Group. Interval Type 0~31
This parameter specifies the index of the operator group that serves the cell. Interval Type 0~31
Uniquely identifying Cn operator name. String Type -
Indicating a Cn Operator. Interval Type 0~3,5~31
Cn Operator index. Interval Type 0~3
Cn Operator 1 index. Interval Type 0~3,5~31
Cn Operator 2 index. Interval Type 0~3,5~31
Cn Operator 3 index. Interval Type 0~3,5~31
Cn Operator 4 index. Interval Type 0~3,5~31
Common Operator Index. Interval Type 5~31,255
Identify operator number in operator group which is not belong to the common operator number. Enumeration Type ONE(One), TWO(Two), THREE(Three), FOUR(Four)
CN protocol version. Enumeration Type R99, R4, R5, R6, R7
Code reshuffle switch based on H. If the switch is enabled, code occupied by the R99 service is adjusted toward codes with small numbers. When [Allocate Code Mode] is set to Automatic, code can be used by HSDPA increases and HSDPA throughput is improved. Enumeration Type OFF(OFF), ON(ON)
H-based code tree reshuffle user number threshold. When the switch is enabled, if the number of users on the tree to be reshuffled is no greater than this parameter, the reshuffle is allowed. Otherwise, the reshuffle is given up. This parameter limits the number of users involved in one reshuffle so that reshuffle on lots of users at a time is avoided. Interval Type 1~16
This parameter specifies one of the triggering conditions of code balancing DRD. (The other condition is the minimum spreading factor.) This condition refers to that the code occupancy in the best cell is not lower than the value of this parameter. Interval Type 0~100
This parameter specifies one of the triggering conditions of code balancing DRD. (The other condition is the code occupancy.) This condition refers to that the minimum spreading factor of the best cell is not smaller than the value of this parameter. Enumeration Type SF4, SF8, SF16, SF32, SF64, SF128, SF256
This parameter specifies whether the code balancing
DRD algorithm will be applied.
- ON: The code balancing DRD algorithm will be
applied.
- OFF: The code balancing DRD algorithm will not be
applied. Enumeration Type ON, OFF
This switch is valid only when the inter-frequency handover switch is enabled. TRUE means that inter-frequency handover is selected in code resource congestion. FALSE means that inter-frequency handover is not selected in code resource congestion. This parameter should be set based on network resource usage. In the case of multi-frequency coverage, if code resources present a bottleneck, such as indoor environment, the parameter is recommended to be set to TRUE. When the value is TRUE, users can be selected for inter-frequency handover during code resource congestion, which can easily release code congestion and use multi-frequency resources. However, the risk of inter-frequency blink handover increases. Enumeration Type FALSE(FALSE), TRUE(TRUE)
The message code scheme. Enumeration Type GERMAN(German), ENGLISH(English), ITALIAN(Italian), FRENCH(French), SPANISH(Spanish), DUTCH(Dutch), SWEDISH(Swedish), DANISH(Danish), PORTUGUESE(Portuguese), FINNISH(Finnish), NORWEGIAN(Norwegian), GREEK(Greek), TURKISH(Turkish), HUNGARIAN(Hungarian), POLISH(Polish), LANGUAGEUNSPECIFIED(Languageunspecified)
Type of event 2D/2F measurement thresholds when
inter-frequency and inter-RAT measurements coexist.
COEXIST_MEAS_THD_CHOICE_INTERFREQ:
choosing the inter-frequency oriented parameters as
event 2D/2F measurement thresholds for inter-
frequency measurement.
COEXIST_MEAS_THD_CHOICE_INTERRAT:
choosing the inter-RAT oriented parameters as event
2D/2F measurement thresholds for inter-RAT
measurement.
When you set the previous parameters, consider the
following factors: event 2D/2F measurement
thresholds for inter-frequency measurement, inter-
frequency and inter-RAT handover decision
thresholds, and current handover policy. For example,
if the event 2D threshold for inter-RAT measurement
is higher than that for inter-frequency measurement,
and inter-frequency cells are preferred when inter-
RAT and inter-frequency cells coexist, then you can
choose
COEXIST_MEAS_THD_CHOICE_INTERFREQ.
Enumeration Type COEXIST_MEAS_THD_CHOICE_INTERFREQ(Choosing the inter-frequency oriented parameters), COEXIST_MEAS_THD_CHOICE_INTERRAT(Choosing the inter-RAT oriented parameters)
For a PTM service, if the ratio of the intra-frequency cells where the service is transmitted in PTM mode to the intra-frequency cells of a cell reaches the percentage specified by this parameter, the cell has gains in combining. Then, the power of the FACH carrying the service in the cell decreases by [PARA]SoftCombPwrOffset[/PARA]. Interval Type 0~100
The ralative power margin of combined traffics, used to calculate the triggering threshold of event F, can avoid the fluctuation of traffic rate in case the power becomes restricted after rate is increased. Interval Type 0~100
This parameter determines whether Common PLMN ID is used when the RNC sends the INIT UE MESSAGE to the CN. Enumeration Type NON-SUPPORTING_UE_ONLY(Non-Supporting UE Only), BOTH(Both), NEITHER(Neither)
Timer T1.Interval between failure of initial alignment and origination of next initial alignment. Interval Type 1~7
Timer T2.Total time SSCF will attempt alignment. Interval Type 30~90
Timer T3.Time between proving PDUs. Interval Type 10~200
The port flow control is disabled when the buffer duration of queue 0 is smaller than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the threshold of congestion recovery of the CBR queue. Interval Type 10~150
The port flow control is disabled when the buffer duration of queue 1 is smaller than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the threshold of congestion recovery of the CBR queue. Interval Type 10~150
The port flow control is disabled when the buffer duration of queue 2 is smaller than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the threshold of congestion recovery of the NRTVBR queue. Interval Type 10~150
The port flow control is disabled when the buffer duration of queue 3 is smaller than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the threshold of congestion recovery of the UBR queue. Interval Type 10~150
The port flow control is disabled when the buffer duration of queue 4 is smaller than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the threshold of congestion recovery of the UBR+ queue. Interval Type 10~150
The port flow control is disabled when the buffer duration of queue 5 is smaller than or equal to the value of this parameter. Interval Type 10~150
The port flow control is enabled when the buffer duration of queue 0 is larger than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the congestion threshold of the CBR queue. Interval Type 10~150
The port flow control is enabled when the buffer duration of queue 1 is larger than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the congestion threshold of the RTVBR queue. Interval Type 10~150
The port flow control is enabled when the buffer duration of queue 2 is larger than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the congestion threshold of the NRTVBR queue. Interval Type 10~150
The port flow control is enabled when the buffer duration of queue 3 is larger than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the congestion threshold of the UBR queue. Interval Type 10~150
The port flow control is enabled when the buffer duration of queue 4 is larger than or equal to the value of this parameter. When the port flow control type is ATM, this parameter specifies the congestion threshold of the UBR+ queue. Interval Type 10~150
The port flow control is enabled when the buffer duration of queue 5 is larger than or equal to the value of this parameter. Interval Type 10~150
Indicating whether the UE in connected mode is allowed to access the cell. When the cell status is BARRED, it indicates that the UEs in connected mode are barred to select/reselect the cell even in the case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
This parameter specifies the RRC redirection
strategy.
- OFF: RRC redirection is not allowed.
- Only_To_Inter_Frequency: Only RRC redirection to
inter-frequency cells is allowed.
- Allowed_To_Inter_RAT: RRC redirection to inter-
frequency cells and redirection to inter-RAT cells are
both allowed.
Enumeration Type OFF, Only_To_Inter_Frequency, Allowed_To_Inter_RAT
Indicating whether the UE in idle mode is allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator for SIB4] is BARRED. If this parameter is ALLOWED, the UE in connected mode can select another intra-frequency cell when the cell selection/reselection condition is satisfied. If this parameter is NOT_ALLOWED, the UE in idle mod cannot select another intra-frequency cell. The indicator can be neglected in case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type ALLOWED, NOT_ALLOWED
This parameter specifies whether the added RBS is connected to the WDMB. Enumeration Type YES, NO
The hysteresis value of the serving FDD cells in
connected mode in case the quality measurement for
cell selection and reselection is set to CPICH RSCP.
It is related to the slow fading feature of the area
where the cell is located. The greater the slow fading
variance is, the greater this parameter.
According to the R regulation, the current serving cell
involves in cell selection after the measurement value
is added with the hysteresis value. The measurement
hysteresis aims to prevent the ping-pong effect of the
cell reselection, which is caused by the slow fading
when the UE is on the edge of the cell. The ping-pong
effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates
(CELL_FACH, CELL_PCH), and thus increase the
load of network signaling and the consumption of UE
batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading
as well as ensuring timely cell updates of the UE.
According to the CPICH RSCP emulation report of
inter-frequency hard handovers, the measurement
hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm
by default when the slow fading variance is 8 dB and
the relative distance is 20 m. In the cells where the
slow fading variance is low and the average moving
speed of UEs is high, for example the suburbs and
countryside, reduce the measurement hysteresis to
guarantee timely location updates of UEs. The higher
the measurement hysteresis is, the less likely it is for
various types of cell reselections to occur, and the
better the slow fading resistance capability is, but the
slower the system reacts to the environment changes.
For detailed information of this parameter, refer to
3GPP TS 25.304.
Interval Type 0~20
The hysteresis value of the serving FDD cells in
connected mode in case the quality measurement for
cell selection and reselection is set to CPICH Ec/No.
It is related to the slow fading feature of the area
where the cell is located. The greater the slow fading
variance is, the greater this parameter. This parameter
is not configured when its value is 255.
According to the R regulation, the current serving cell
involves in cell selection after the measurement value
is added with the hysteresis value. The measurement
hysteresis aims to prevent the ping-pong effect of the
cell reselection, which is caused by the slow fading
when the UE is on the edge of the cell. The ping-pong
effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates
(CELL_FACH, CELL_PCH), and thus increase the
load of network signaling and the consumption of UE
batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading
as well as ensuring timely cell updates of the UE.
According to the CPICH RSCP emulation report of
inter-frequency hard handovers, the measurement
hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm
by default when the slow fading variance is 8 dB and
the relative distance is 20 m. In the cells where the
slow fading variance is low and the average moving
speed of UEs is high, for example the suburbs and
countryside, reduce the measurement hysteresis to
guarantee timely location updates of UEs. The higher
the measurement hysteresis is, the less likely it is for
various types of cell reselections to occur, and the
better the slow fading resistance capability is, but the
slower the system reacts to the environment changes.
For detailed information of this parameter, refer to
Interval Type 0~20,255
Offset of cell CPICH RSCP measurement value in
cell selection or reselection when the UE is in
connected mode.
This parameter is used for cell offset in cell selection
and reselection. During cell reselection, the cell offset
corresponding to CPICH Ec/No is QOffset2sn, that to
CPICH RSCP is QOffset1sn. Idle is used for idle
mode, and Conn for connected mode. ConnQoffset1sn
and ConnQoffset2sn are valid only when SIB12Ind =
TRUE, namely, the SIB12 message is existing.
Offset of neighboring cell CPICH measurement value.
This parameter is used for RSCP measurement. The
offset is subtracted from the neighboring cell
measurement value before cell reselection.
In cell reselection algorithm, this parameter is used for
moving the border of a cell. This parameter can be
configured by the Radio Network Planner(RNP)
according to reality.
For details of QOffset1sn and QOffset1sn, refer to
3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value the parameter, the higher the probability of
doing so.
Interval Type -50~50
Offset of cell CPICH Ec/No measurement value in
cell selection or reselection when the UE is in
connected mode.
This parameter is used for cell offset in cell selection
and reselection. During cell reselection, the cell offset
corresponding to CPICH Ec/No is QOffset2sn, that to
CPICH RSCP is QOffset1sn. Idle is used for idle
mode, and Conn for connected mode. ConnQoffset1sn
and ConnQoffset2sn are valid only when SIB12Ind =
TRUE, namely, the SIB12 message is existing.
Offset of neighboring cell CPICH measurement value.
This parameter is used for Ec/No measurement. The
offset is subtracted from the neighboring cell
measurement value before cell reselection.
In cell reselection algorithm, this parameter is used for
moving the border of a cell. This parameter can be
configured by the Radio Network Planner(RNP)
according to reality.
For details of QOffset1sn and QOffset1sn, refer to
3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value the parameter, the higher the probability of
doing so.
Interval Type -50~50
Threshold for inter-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the inter-frequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the UE may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections to be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication be Interval Type -16~10,127
Threshold for intra-frequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intra-frequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the UE may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections to be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communicatio Interval Type -16~10,127
This parameter is valid when [Cell barred indicator for SIB4] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set to BARRED. The time barred can be increased or reduced in network planning based on the actual time the cell is barred. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type D10(10 seconds), D20(20 seconds), D40(40 seconds), D80(80 seconds), D160(160 seconds), D320(320 seconds), D640(640 seconds), D1280(1280 seconds)
It is used to calculate the transmit power of the first preamble in the random access process. The formula is as follows: Preamble_Initial_Power = Primary CPICH DL TX power-CPICH_RSCP + UL interference + Constant Value. Where, Preamble_Initial_Power is the preamble initial TX power, Primary CPICH DL TX power is the downlink transmit (TX) power of PCPICH, CPICH_RSCP is the receive signaling code power of the PCPICH measured by UEs, and UL interference is the uplink interference. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type -35~-10
Context type of the Iur interface to be reset. Enumeration Type Context, Context_Group, All_Contexts
This parameter specifies whether to run the ping command consecutively. Enumeration Type NO, YES
This parameter specifies the DL maximum bit rate of conversation for PS domain user. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the UL maximum bit rate of conversation for PS domain user. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends conversational service data on the Iub interface. Interval Type 1~1000
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends conversational service data on the Iub interface. Interval Type 1~2000
Maximum rate of the wideband AMR speech service for copper users. Enumeration Type WBAMR_BITRATE_6.60K, WBAMR_BITRATE_8.85K, WBAMR_BITRATE_12.65K, WBAMR_BITRATE_14.25K, WBAMR_BITRATE_15.85K, WBAMR_BITRATE_18.25K, WBAMR_BITRATE_19.85K, WBAMR_BITRATE_23.05K, WBAMR_BITRATE_23.85K
Maximum rate of the narrowband AMR speech service for copper users. Enumeration Type NBAMR_BITRATE_4.75K, NBAMR_BITRATE_5.15K, NBAMR_BITRATE_5.90K, NBAMR_BITRATE_6.70K, NBAMR_BITRATE_7.40K, NBAMR_BITRATE_7.95K, NBAMR_BITRATE_10.20K, NBAMR_BITRATE_12.20K
This parameter specifies the number of sent packets. Interval Type 1~28
Count-C checking values. Interval Type 1024~4294967295
Counter check switch. Enumeration Type ON, OFF
This parameter indicates whether the closed loop TX diversity mode 1 supported. Enumeration Type CP1_Supported, CP1_not_Supported
This parameter specifies the number of subframes transmitted when the priority of reporting CQI is higher than the priority of transmitting patterns on the UL DPCCH in DTX mode after one HS-DSCH reception. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D0, D1, D2, D4, D8, D16, D32, D64, D128, D256, D512, INFINITY
This parameter specifies the CQI feedback cycle in DTX-DRX mode. Currently, the value of this parameter can be set to only D2 because the NodeB supports only D2. For details, refer to the 3GPP TS 25.433 protocol. Enumeration Type D0, D2, D4, D8, D10, D20, D40, D80, D160, D16, D32, D64
Maximum number of cell reselection. This parameter, along with the [Time for evaluating max cell reselection], is used for rate evaluation in HCS. For details, refer to 3GPP TS 25.304. Interval Type 1~16
This field indicate whether the cross IP address is available. Enumeration Type UNAVAILABLE, AVAILABLE
R99 CS conversational service downlink factor. Interval Type 0~100
R99 CS conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 CS conversational bearing primary path load threshold. Interval Type 0~100
R99 CS conversational secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 CS conversational primary secondary path load ratio threshold. Interval Type 0~100
R99 CS conversational service uplink factor. Interval Type 0~100
This parameter specifies maximum CS services. Interval Type 0~61200
CS domain Relocation GSM load THD.
This parameter specifies the CS domain relocation
GSM load threshold. When the GSM load policy is
used, that is, when [NcovHoOn2GldInd] in SET
INTERRATHONCOV is set to ON, the CS domain
inter-system relocation out process will be stopped if
the GSM system send its cell load to the RNC and the
cell load exceeds the CS domain Reloc GSM load
THD. Otherwise, the RNC does not stop the CS
domain inter-system relocation out process.
Interval Type 0~100
Indicating whether the CS domain permits the CN information to update . Enumeration Type OFF, ON
Cs Information Update protection timer. Interval Type 60~900
This parameter specifies feature mode of operators in the CS domain. You should configure the network resource identifier (NRI) when MOCN or Iu-Flex is supported. Enumeration Type SUPP_NONE, SUPP_IUFLEX, SUPP_MOCN, SUPP_IUFLEX_MOCN
NRI length for CS domain. Interval Type 1~10
Whether to impose the access restriction on the CS domain. Enumeration Type FALSE, TRUE
Indicating whether the cell allows CS service inter-
RAT handover.
ON: CS service inter-RAT handover is enabled.
OFF: CS service inter-RAT handover is disabled.
Service handover refers to the handover attribute and
related parameter configuration on the network side
for each service. When a service is established, the
related measurements and inter-RAT handover are
immediately triggered. These two switches are
enabled only for service handover; generally, they are
disabled by default.
Note that the service handover is enabled only when
the handover attribute is set to
HO_TO_GSM_SHOULD_BE_PERFORM and CS
service inter-RAT handover is set to ON. Both
conditions are mandatory. For hybrid services, the
service handover is not triggered.
Enumeration Type ON, OFF
R99 CS streaming service downlink factor. Interval Type 0~100
R99 CS streaming primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 CS streaming bearing primary path load threshold. Interval Type 0~100
R99 CS streaming secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 CS streaming primary secondary path load ratio threshold. Interval Type 0~100
R99 CS streaming service uplink factor. Interval Type 0~100
CS algorithm switch.
1) CS_AMRC_SWITCH: When the switch is on and
the AMRC license is activated, the AMR control
function is enabled for AMR services.
2)
CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH: When the switch is on, the default
configurations of signaling and RABs, which are
stipulated in 3GPP 25.331, are used for relocation of
the UE from GSM to WCDMA. When the switch is
not on, the default configurations are not used.
Instead, the complete information of RB, TrCH, and
PhyCH, which are in the HANDOVER TO UTRAN
COMMAND message is used.
3) CS_IUUP_V2_SUPPORT_SWITCH: When the
switch is on and the "Support IUUP Version 2"
license is activated, the RNC supports the TFO/TRFO
function.
4)
CS_ZERO_C_AMR_CFG_TWO_CODCH_SWITC
H: When the switch is on, the AMR speech service at
a maximum rate of 7.95 kbit/s is carried over two
DCHs. When the switch is not on, the narrowband
AMR speech service at a maximum rate of 7.95 kbit/s
is carried over three DCHs.
Bit Field Type CS_AMRC_SWITCH, CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_SWITCH, CS_IUUP_V2_SUPPORT_SWITCH, CS_ZERO_C_AMR_CFG_TWO_CODCH_SWITCH
Indicating the channel type of CS speech service.
-DCH: Both uplink and downlink are beared on DCH.
-HSPA:Uplink is beared on E-DCH, downlink beared
on HS-DSCH. Enumeration Type DCH(UL_DCH,DL_DCH), HSPA(UL_EDCH,DL_HSDSCH)
This parameter specifies the relative delay for jitter correction of the CS traffic over the downlink HSPA channel. This parameter indicates the maximum CS delay for the traffic transmitted to the UE. For details, see 3GPP TS 25.331. Interval Type -100~100
This parameter specifies the relative delay for jitter correction of the CS traffic over the uplink HSPA channel. The CS data is buffered on the PDCP layer and then sent to the higher layer in packets after CFN plus CSVoiceHspaUlRelDelay. In this way, the CS data can be transmitted over the HSPA channel at regular intervals. Interval Type -100~100
This parameter specifies the TTI type used for CS services over the uplink HSPA channel. Enumeration Type EDCH_TTI_10ms, EDCH_TTI_2ms
Indicating whether to support CS over HSPA of the neighboring RNC. Enumeration Type OFF, ON
Uniquely identifying a TFC on the SCCPCH. The specific parameter value depends on the CTFC Size (2 bits: 0~3, 4 bits: 0~15, 6 bits: 0~63, 8 bits: 0~255, 12 bits: 0~4095, 16 bits: 0~65535, 24 bits: 0~16777215). For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 0~16777215
Calculated TFC (CTFC) length of the Transport Format Combination Set (TFCS) on the SCCPCH. This parameter value is related to the maximum number of Transport Format Combinations (TFCs) on the transport channel. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type BIT2, BIT4, BIT6, BIT8, BIT12, BIT16, BIT24
The sharing offset should be added to the target subrack or subsystem. This parameter is used for preferable selection of the homing subrack and homing subsystem during call forwarding. Interval Type 1~10
Forwarding threshold of control plane load sharing. When the CPU usage is between the sharing threshold and overload threshold, and call number in each second reaches [SharingOutCAPSMidLoad], new arrival call attempts will be shared out to other CPU. Interval Type 0~100
Number of the MPU slot. Interval Type 0,2,4,8,10
This parameter specifies whether to support the configuration rollback function. Enumeration Type ON, OFF
This parameter specifies the type of VPL/VCL cross connection. Enumeration Type VPLCX, VCLCX
Uniquely identifying a classified zone. The value of Classified Zone ID is denoted by decimal numerals. Interval Type 0~4799
This parameter is used to check whether the UE in the low activity state. If the UE is on DCH channel, the low activity counter increases by 1 every time traffic volume event 4B is reported. If the UE is on FACH channel, the low activity counter increases by 1 if the traffic volume is 0 in the traffic volume event 4B report. Enumeration Type D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
Pending time after the traffic volume event 4B is reported. This parameter is used to prevent too many traffic volume events 4B being reported. Enumeration Type D250, D500, D1000, D2000, D4000, D8000, D16000
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
After the 1A measurement report is received, the rate is reduced to the threshold rate for soft handover and the timer specified by this parameter starts. The DL rate cannot be increased before the timer expires. Interval Type 1~255
This parameter defines the length of penalty timer for
SHO failure after rate reduction in the active set.
When the rate reduction in the active set is performed
which triggers the increase of SHOs in the target cell,
if the target cell fails to join the active again, the RNC
starts the penalty timer for SHO failure. This
parameter defines the length of the penalty timer.
Before the timer expires, the rate increasing in the
active set is prohibited, but rate reduction is not
prohibited.
Such penalty strategy is applied in the following
scenario:
If there is a cell, for some reason, it has high signal
strength but heavy load, and cannot join the active set
throughout by then. This cell may enter the SHO rate
reduction evaluation process repeatedly, which results
in rate reduction in the active set. If the cell fails to
join the active set, the rate in the active set may
increase during the evaluation process because of the
DCCC algorithm. To avoid such rate fluctuation, the
RNC uses a strategy of rate increase penalty after the
SHO failure again.
Interval Type 0~255
Strategy for adjustment of the rate of the PS BE service when the UE is in the CELL_DCH state. RATE_UP_AND_DOWN_ON_DCH indicates that the rate over the DCH can be raised or lowered. RATE_UP_ONLY indicates that the rate over the DCH can only be raised, which means that the UE can switch to the FACH state at any rate. Enumeration Type RATE_UP_AND_DOWN_ON_DCH, RATE_UP_ONLY_ON_DCH
Length of the penalty period within which the rate of a BE service cannot be increased even if the 4A measurement report is received. Increase of the BE service rate is triggered by the 4A measurement report.4A report will not be processed until this Penalty Timer expires. Interval Type 1~65535
This parameter specifies the period of DCH throughput ratio measurement.Macd performs statistic of traffic volume on DCH and reports 4B events which are used for the rate decrease process of BE service set up on DCH. Interval Type 1~1000
This parameter specifies the number of measurement periods during which no event 4B related to DCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel reconfiguration operations. The larger the value of this parameter, the longer the time from the last reporting of throughput-related event 4B on DCH to the next reporting, and the smaller the possibility of triggering throughput-related event 4B on DCH. Interval Type 0~1023
This parameter specifies the number of measurement periods from the moment when the DCH rate falls below the 4B threshold to the moment when the throughput-related event 4B on DCH is triggered. This parameter is set to avoid unnecessary reports triggered by DCH throughput fluctuation. The larger the value of this parameter, the longer the required duration of the DCH throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughput-related event 4B on DCH. Interval Type 0~1023
This parameter specifies the subnet number of the internal debugging IP address of the RNC. Interval Type 1~126,128~223
This parameter specifies the default operator that RNC chooses in the MOCN cell. The value 255 means that no default operator is defined. Interval Type 0~3,255
This parameter specifies the constant that is used by
the RNC to compute the DPCCH_Power_Offset
which is further used by the UE to calculate the UL
DPCCH_Initial_Power during the open-loop power
control. The formulas are as follows:
DPCCH_Power_Offset = Primary CPICH DL TX
power + UL interference + Default Constant Value
DPCCH_Initial_Power = DPCCH_Power_Offset -
CPICH_RSCP
where DPCCH_Power_Offset is the DPCCH initial
transmit (TX) power offset, Primary CPICH DL TX
power is the downlink TX power of P-CPICH, and
CPICH_RSCP is the received signal code power of
the P-CPICH measured by the UE.
A small value of DPCCH_Power_Offset might lead to
uplink synchronization failure at cell edges during
link setup, thus affecting the uplink coverage. A large
value of DPCCH_Power_Offset, however, has
instantaneous interference on uplink reception, thus
affecting the uplink reception performance. For
details of CPICH_RSCP, refer to the 3GPP TS
25.331.
Interval Type -35~-10
When the RNC is performing downlink open power control, it evaluates link consumption according to the PCPICH TX power and the PCPICH signal intensity detected in UE access. However, in some cases, the UE may not report the signal intensity. In this situation, the RNC uses this parameter to evaluate link consumption. Interval Type -30~30
This parameter specifies the delay time. When the RNC recovers from disaster and starts to operate, it performs re-host policy for the primary hosted NodeB after the specified delay time. Interval Type 0~3600
This parameter specifies the maximum delay difference between different IMA links in an IMA group. Interval Type 4~255
This parameter specifies the delay class. According to the specification, a maximum of five delay classes, that is, class 1 to class 5, are available. The five classes do not overlap each other. Interval Type 1~5
This parameter specifies the threshold of code occupancy offset between the current cell and the target cell when code balancing DRD is applied. Only when the cell code occupancy offset reaches this threshold can a neighboring cell be selected to be a candidate cell for DRD. Interval Type 0~100
Actual minimum required RX level = minimum required RX level + extended minimum required RX level. For details, refer to the 3GPP TS 25.304 protocol. Interval Type -2~-1
M3UA destination entity indexes and M3UA destination entity have a one-to-one correspondence. Interval Type 0~118
This parameter specifies the destination IP address. IP Address Type -
This parameter specifies a destination IP address. IP Address Type -
This parameter specifies the ID of a remote MEP. Interval Type 1~100
This parameter specifies an MEP in an MA. Interval Type 1~100
This parameter specifies the period of reporting the DGPS data. Interval Type 1~60
This parameter specifies the direction that the traffic
volume measurement is applicable to.
- DOWNLINK: indicates downlink traffic volume
measurement.
- UPLINK: indicates uplink traffic volume
measurement or E-DCH throughput measurement. Enumeration Type UPLINK, DOWNLINK
There are two combination methods for uplink
combination of soft handover: one is maximum ratio
combination at the NodeB Rake receiver, which gives
the highest combination gain; the other is selective
combination at the RNC, which gives a relatively
smaller combination gain. The default value of the
indication switch is MAY, which means the NodeB
decides whether to implement maximum ratio
combination according to its own physical conditions;
when MUST is selected, the NodeB is forced to carry
out maximum ratio combination which is usually used
in tests; when MUST_NOT is selected, the NodeB is
forbidden to carry out maximum ratio combination.
Consider the working status (test/normal operation)
and the propagation environment when deciding
whether to implement softer combination and to adopt
which kind of softer combination.
Enumeration Type MAY(NodeB chooses whether combine at NodeB), MUST(Must combine at NodeB), MUST_NOT(Must combine at RNC)
DL activity factor of the R99 AMR conversational service. Interval Type 0~100
Duration from when the AMR TX power is beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power. Interval Type 1~6000
DL activity factor of the R99 background service. Interval Type 0~100
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slow-fading capability, but the lower the signal change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
This parameter specifies the DL initial access rate used when HSDPA BE services switch to the DCH. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the default rate threshold for decision to use DCH to carry DL PS domain background/interactive services. If the FRC parameters of the best cell cannot be obtained, this default value will be used. Only when the DL service rate is higher than or equal to this threshold, and the UL service rate is higher than or equal to the uplink threshold, the service will be set up on DCH. Otherwise, it will be set up on CCH. According to the product specifications, only the background/interactive services whose rate is lower than 16 kbit/s can be carried on the common channel.Therefore, this parameter can only be set to 16 kbit/s or 8 kbit/s. Enumeration Type D8, D16
DL BE traffic Initial bit rate. When DCCC function is enabled, the downlink initial bit rate will be set to this value if the downlink max bit rate is higher than the initial bit rate. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the default rate threshold for decision to use HS-DSCH to carry DL PS domain background/interactive services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HS-DSCH. Otherwise, it will be carried on DCH. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384, D768, D1024, D1536, D1800, D2048, D3600, D7200, D10100, D13900
Duration from when the BE TX power is beyond the threshold Ea to when the event Ea is triggered or from when the BE TX power is below the threshold Eb to when the event Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power. Interval Type 1~6000
Duration within which the measured power being lower than the threshold is allowed for BE service. This parameter is used to avoid faulty reporting due to instability of power. If the value of this parameter is set too high, delay is caused. If the parameter is set to A, the hysteresis time is A x 10 ms. Interval Type 1~6000
Length of smoothing filter window of downlink CAC. Interval Type 1~32
Different admission policies are used for dedicated channel and common channel users. For common channel users, resources instead of separate power admission decision are reserved. For dedicated channel users, according to the current load factor and the characteristics of the new call, the CAC algorithm predicts the new TX power with the assumption of admitting the new call, then plus with the premeditated common channel DL load factor to get the predicted DL load factor. Then, compare it with the DL admission threshold. If the value is not higher than the threshold, the call is admitted; otherwise, rejected. Interval Type 0~100
Admission threshold of the total cell downlink power. If the value is too high, too many users will be admitted. However, the throughput of a single user is easy to be limited. If the value is too low, cell capacity will be wasted. Interval Type 0~100
This parameter specifies the compression method that
the NodeB supports in the downlink.
- SF/2: SF reduction by two
- HIGHER_LAYER_SCHDL: higher layer
scheduling
If both SF/2 and HIGHER_LAYER_SCHDL are
selected, the NodeB supports both of the compression
methods in the downlink.
Bit Field Type SF/2, HIGHER_LAYER_SCHDL
Number of the DL code to be reserved. For details, refer to the 3GPP TS 25.213 protocol. Interval Type 0~255
The percentage of the conversational AMR service
threshold to the 100% downlink load. It is applicable
to algorithm 1 and algorithm 2. The parameter is used
for controlling the AMR service admission. That is,
when an AMR service is accessing, the RNC
evalutates the measurement value of the downlink
load after the service is accessed. If the DL load of a
cell is higher than this threshold after the access of an
AMR speech service, this service will be rejected. If
the DL load of a cell will not be higher than this
threshold, this service will be admitted.
The DL load factor thresholds include parameters of
[DL threshold of Conv non_AMR service], [DL
handover access threshold] and [DL threshold of other
services]. The four parameters can be used to limit the
proportion between the conversational service,
handover user and other services in a specific cell,
and to guarantee the access priority of the
conversational AMR service. If the value is too high
the system load after admission may be over large,
which impacts system stability and leads to system
congestion. If the value is too low, the possibility of
user rejects may increase, resulting in waste in idle
resources and the failure to achieving network
planning target.
Interval Type 0~100
The percentage of the conversational non-AMR
service threshold to the 100% downlink load. It is
applicable to algorithm 1 and algorithm 2. The
parameter is used for controlling the non-AMR
service admission. That is, when a non-AMR service
is accessing, the RNC evalutates the measurement
value of the downlink load after the service is
accessed. If the DL load of a cell is higher than this
threshold after the access of a non-AMR speech
service, this service will be rejected. If the DL load of
a cell will not be higher than this threshold, this
service will be admitted.
The DL load factor thresholds include parameters of
[DL threshold of Conv non_AMR service], [DL
handover access threshold] and [DL threshold of other
services]. The four parameters can be used to limit the
proportion between the conversational service,
handover user and other services in a specific cell,
and to guarantee the access priority of the
conversational non-AMR service.If the value is too
high the system load after admission may be over
large, which impacts system stability and leads to
system congestion. If the value is too low, the
possibility of user rejects may increase, resulting in
waste in idle resource and the failure to achieving the
network planning target.
Interval Type 0~100
Number of users selected in a DL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value. Interval Type 1~10
Number of users selected in a DL LDR CS domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value. Interval Type 1~10
For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum DL rate is greater than the threshold. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
Maximum DL rate during network planning when coverage of the entire cell is ensured. When the DL TCP is limited, the current rate is reduced to the full coverage rate if the current rate is greater than the full coverage rate. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the DCCC algorithm is applied to BE services whose maximum DL rate is greater than the threshold. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the DL GBR of the BE service. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
Some cell resources can be reserved for handover UEs to guarantee handover success rate and improve access priority of handover services. This parameter defines the quantity of downlink code and CE resources reserved for handover. SFOFF refers to that no resources is reserved. SF32 refers to that a code resource with SF = 32 and its corresponding credit resource are reserved. The backer position the value is in {SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF}, the less code and credit resources reserved for handover UEs. The possibility of rejecting handover UE admissions increases and performance of UEs cannot be guaranteed. The more frontal position the value is, the more the possibility of rejecting new UEs is and some idle resources are wasted. Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF)
The percentage of the handover service admission
threshold to the 100% downlink load. It is applicable
to algorithm 1 and algorithm 2. The parameter is used
for controlling the handover admission. That is, when
a service is handing over to a cell, the RNC evalutates
the measurement value of the downlink load after the
service is accessed. If the DL load of a cell is higher
than this threshold after the access, this service will be
rejected. If the DL load of a cell will not be higher
than this threshold, this service will be admitted.
The DL load factor thresholds include parameters of
[DL threshold of Conv non_AMR service], [DL
handover access threshold] and [DL threshold of other
services]. The four parameters can be used to limit the
proportion between the non-handover service,
handover user and other services in a specific cell,
and to guarantee the access priority of the handover
service. This parameter is related to the cell radius
and cell maximum TX power. If the value is too high,
the system load after admission may be over large,
which impacts system stability and leads to system
congestion. If the value is too low, the possibility of
user rejects may increase, resulting in waste in idle
resources.
Interval Type 0~100
Reserved DL power factor for HSUPA user. The higher the value is, the more resources reserved for the HSUPA control channel, which leads to resource waste. If the value is too low, HSUPA user quality may be impacted. Interval Type 0~100
DL activity factor of the R99 interactive service. Interval Type 0~100
The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell load is decreased. However, high value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the inter-frequency load handover, and the easier it is to maintain the stability of the target cell load. Interval Type 0~400000
The inter-frequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find a qualified target cell for the blind handover. Excessively small value of the parameter, however makes the target cell easily enter the congestion status. The higher the parameter is, the more difficult it is for the inter-frequency blind handover occurs. Interval Type 0~100
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing downlink LDR-AMR voice service rate reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control may occur (the state of basic congestion turns into another extreme--underload). If the parameter value is too low, the LDR action has a slow response and the effect is not apparent, affecting the LDR performance. Interval Type 1~10
Length of smoothing filter window of downlink LDR. Interval Type 1~32
Number of RABs selected in a DL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value. Interval Type 1~10
Reserved SF threshold in downlink credit LDR. The downlink credit LDR could be triggered only when the SF factor corresponding to the downlink reserved credit is higher than the uplink or downlink credit SF reserved threshold. The lower the parameter value is, the easier the credit enters the congestion status, the easier the LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a higher admission success rate because the resource is reserved. The parameter should be set based on the operator's requirement. Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
NOACT: No load reshuffling action is taken.
INTERFREQLDHO: The inter-frequency load
handover is performed.
BERATERED: Channels are reconfigured for the BE
service.
QOSRENEGO: The renegotiation on the QoS of the
uncontrollable real-time service is performed.
CSINTERRATSHOULDBELDHO: The inter-RAT
SHOULDBE load handover of the CS domain is
performed.
PSINTERRATSHOULDBELDHO: The inter-RAT
SHOULDBE load handover of the PS domain is
performed.
AMRRATERED (AMR service rate decreasing): The
setting of the TFC subset and the negotiation of the
service rate can be performed for the AMR voice
service.
MBMSDECPOWER (MBMS power limiting): The
MBMS service is configured with the minimum
power.
CODEADJ (code tree reshuffling): The fragments of
the downlink code tree are arranged.
PSINTERRATSHOULDNOTBELDHO: The inter-
RAT SHOULDNOTBE load handover of the CS
domain is performed.
PSINTERRATSHOULDNOTLDHO: The inter-RAT
SHOULDNOTBE load handover of the PS domain is
performed.
The LDR takes the actions in the preset sequence and
judges whether each action is successful. If an action
is unsuccessful, the LDR turns to the next action. If an
action is successful, a parameter is set to NOACT, or
all the preceding actions are taken, the downlink LDR
is finished, and the system waits for the next
Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
Number of RABs selected in a DL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain real-time subscribers. The setting of this parameter is analogous to the setting of BE service rate reduction subscriber number. Because the number of subscribers performing QoS renegotiation may be smaller than the value of this parameter, for example, the candidate subscribers selected for downlink LDR do not meet the QoS renegotiation conditions, you must leave some margin when setting this parameter to ensure the success of load reshuffling. Interval Type 1~10
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The carrier shall make a trade-off between these factors. Interval Type 0~100
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(MBMS descend power), CodeAdj(Code adjust), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The carrier shall make a trade-off between these factors. Interval Type 0~100
If the DL load state of the cell is lasted longer than this threshold, the DL load state of the cell transfers. Interval Type 10~600000
This parameter specifies the maximum number of TFCs (Transport Format Combination) allowed in the downlink. The larger the value of this parameter, the larger the number of available TFCs in the downlink. Enumeration Type D16, D32, D48, D64, D96, D128, D256, D512, D1024
Reserved DL power factor for MBMS service. Interval Type 0~100
Smooth filtering coefficient for DL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. Smoothness is decided by the filtering coefficient of the measurement. The greater the filtering coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the respond to changes of the measured value becomes slower. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
This parameter determines whether automatic or manual mode is used for 3-step adjustment of the DL intermediate rate. Enumeration Type AUTO_CALC, HAND_APPOINT
Threshold of the DL intermediate rate when the 3-step mode is used for DL rate adjustment and the manual mode is used for DL intermediate rate adjustment. Enumeration Type D16, D32, D64, D128, D144, D256, D384
The AMRC needs to check whether the TFO/TrFO exists before adjusting DL AMR speech rate. If the TFO/TrFO does not exist, the CN has the associated encoder and the RNC delivers the RATE CONTROL command to the CN and starts the timer. If the TFO/TrFO exists, the CN has no associated encoder and the local RNC delivers to the peer RNC a command requesting the AMR mode at a lower level. In addition, the local RNC starts the timer. After the peer RNC receives the command, it directly uses the AMR mode at a lower level for the UL and returns the adjustment information to the local RNC. If the acknowledgement message is received before the timer expires, the adjustment of the DL AMR speech rate is successful. Otherwise, the adjustment fails. If there is no TFO/TrFO, it is recommended that the timer be set to 3000 ms. If there is the TFO/TrFO, it is recommended that the timer be set to 7000 ms because of more procedures involved in rate adjustment. Interval Type 1~4294967295
DL activity factor of the R99 non AMR conversational service. Interval Type 0~100
Length of smoothing filter window of downlink OLC. Interval Type 1~32
DL fast TF restriction refers to a situation where,
when the cell is overloaded and congested, the
downlink TF can be adjusted to restrict the number of
blocks transported in each TTI at the MAC layer and
the rate of user data, thus reducing the cell downlink
load.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of RABs selected in executing downlink OLC fast
restriction.
Selection of RABs of the OLC is based on the service
priorities and ARP values and bearing priority
indication. The RAB of low priority is under control.
In the actual system, UlOlcFTFRstrctRabNum and
DlOlcFTFRstrctRabNum can be set on the basis of
the actual circumstances. If the high-rate subscribers
occupy a high proportion, set
UlOlcFTFRstrctRabNum and
DlOlcFTFRstrctRabNum to comparatively low
values. If the high-rate subscribers occupy a low
proportion, set UlOlcFTFRstrctRabNum and
DlOlcFTFRstrctRabNum to comparatively high
values. The higher the parameters are, the more users
are involved in fast TF restriction under the same
conditions, the quicker the cell load decreases, and the
more user QoS is affected.
Interval Type 1~10
DL fast TF restriction refers to a situation where,
when the cell is overloaded and congested, the
downlink TF can be adjusted to restrict the number of
blocks transported in each TTI at the MAC layer and
the rate of user data, thus reducing the cell downlink
load.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of downlink OLC fast TF restriction performed in
entering/exiting the OLC status.
After the overload is triggered, the RNC immediately
executes OLC by first executing fast TF restriction.
The internal counter is incremented by 1 with each
execution. If the number of overloads does not exceed
the OLC action threshold, the system lowers the BE
service rate by lowering TF to relieve the overload. If
the number of overloads exceeds the OLC action
threshold, the previous operation has no obvious
effect on alleviating the overload and the system has
to release users to solve the overload problem. The
lower the parameters are, the more likely the users are
released, resulting in negative effect on the system
performance. If the parameters are excessively high,
the overload status is released slowly.
Interval Type 0~100
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slow-fading capability, but the lower the signal change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL overload and congestion control function of the cell is stopped. The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a ping-pong effect. The recommended difference between the OLC release threshold and the OLC trigger threshold is higher than 10%. It is desirable to set the two parameters a bit higher given that the difference between OLC trigger threshold and OLC release threshold is fixed. Interval Type 0~100
User release is an extreme method in reducing the
cell load and recovering the system when the cell is
overloaded and congested.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of RABs released in executing downlink OLC service
release.
For the users of a single service, the releasing of
RABs means the complete releasing of the users. The
releasing of RABs causes call drops, so
UlOlcFTFRstrctTimes or DlOlcFTFRstrctTimes
should be set to a low value. Higher values of the
parameter get the cell load to decrease more
obviously, but the QoS will be affected.
Interval Type 0~10
DL OLC trigger hysteresis. Interval Type 1~6000
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL overload and congestion control function of the cell is triggered. The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a ping-pong effect. The recommended difference between the OLC release threshold and the OLC trigger threshold is higher than 10%. It is desirable to set the two parameters a bit higher given that the difference between OLC trigger threshold and OLC release threshold is fixed. Interval Type 0~100
The percentage of other service thresholds to the
100% downlink load. The services refer to other
admissions except the conversational AMR service,
conversational non-AMR service, and handover
scenarios. It is applicable to algorithm 1 and algorithm
2. The parameter is used for controlling other service
admissions. That is, when a service is accessing, the
RNC evalutates the measurement value of the
downlink load after the service is accessed. If the DL
load of a cell is higher than this threshold after the
access of a service, this service will be rejected. If the
DL load of a cell will not be higher than this
threshold, this service will be admitted.
The DL load factor thresholds include parameters of
[DL threshold of Conv non_AMR service], [DL
handover access threshold] and [DL threshold of other
services]. The four parameters can be used to limit the
proportion between the conversational service,
handover user and other services in a specific cell,
and to guarantee the access priority of other services.
If the value is too high the system load after admission
may be over large, which impacts system stability and
leads to system congestion. If the value is too low, the
possibility of user rejects may increase, resulting in
waste in idle resources and the failure to achieving
network planning target.
Interval Type 0~100
Orthogonal Variable Spreading Factor (OVSF) of the DL code to be reserved. For details, refer to the 3GPP TS 25.213 protocol. Enumeration Type SF4, SF8, SF16, SF32, SF64, SF128, SF256
Number of users selected in a DL LDR PS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value. Interval Type 1~10
Number of users selected in a DL LDR PS domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value. Interval Type 1~10
Rate adjustment switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, DL rate of AMR services can be adjusted. Enumeration Type NO, YES
Inter-frequency handover switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, inter-frequency handover can be performed for AMR services to ensure the QoS. Enumeration Type NO, YES
Inter-RAT handover switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, inter-RAT handover can be performed for AMR services to ensure the QoS. Enumeration Type NO, YES
Timer length for downlink Qos measurement.
This parameter controls the time lengths for the inter-
frequency and inter-RAT measurement based on Qos.
After inter-frequency or inter-RAT measurement
starts, if no inter-frequency handover is performed
when this timer expires, the measurement is stopped,
and the compressed mode is deactivated, if any. If this
parameter is set to 0, this indicates that the timer will
not be started.
For the inter-frequency or inter-RAT measurement
based on coverage, the compressed mode can be
stopped through reporting event 2F. For measurement
that is not based on coverage, event 2F is not reported,
and the timer must be set but should not be set to 0.
As for the impact on network performance:
It reduces the influence of long time compressed
mode to the serving cell.
The compressed mode may be stopped ahead of time,
which can cause the result that the UE fails to initiate
inter-frequency or inter-RAT handover, and thus can
lead to call drops.
Interval Type 0~512
Inter-frequency handover switch of link stability control for DL QoS of VP services. When the parameter is set to YES, inter-frequency handover can be performed for VP services to ensure the QoS. Enumeration Type NO, YES
Rate adjustment switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, DL rate of WAMR services can be adjusted. Enumeration Type NO, YES
Inter-frequency handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, inter-frequency handover can be performed for WAMR services to ensure the QoS. Enumeration Type NO, YES
Inter-RAT handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can be performed for WAMR services to ensure the QoS. Enumeration Type NO, YES
When the switch is on, the congestion detection and control for DL R99 service is supported. Enumeration Type OFF(The switch of DL R99 congestion control is off), ON(The switch of DL R99 congestion control is on)
This parameter determines whether the DL rate is lowered to the minimum rate in one step or two steps for BE service set up on DCH in downlink. Enumeration Type 2_Rates, 3_Rates
This parameter determines whether the DL rate is raised to the maximum rate in one step or two steps for BE service set up on DCH in downlink. Enumeration Type 2_Rates, 3_Rates
Frequency hysteresis of downlink RSCP Qos.
This parameter controls the used frequency thresholds
for the inter-frequency and inter-RAT measurement
based on Qos.
In event mode, if the inter-frequency and inter-RAT
measurement events occurred for the downlink Qos
reason, the used frequency threshold of the RSCP
measurement quantity is equal to the used frequency
threshold that is configured on the BAM server in
coverage measurement plus this parameter.
As for the impact on network performance:
The larger the value of the parameter is, the more
easily event 2B, inter-frequency handover based on
Qos, and event 3A, inter-RAT handover based on
Qos, can be triggered, and thus the more timely the
handover to the target cell can be performed.
Interval Type -15~15
This parameter refers to the downlink spreading factor used by the RL carrying single service with the CN domain in typical environment. The downlink transmit power parameters of common services are obtained by emulation, and the value of [Downlink spreading factor] depends on such factors as service rate and puncturing limitation. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type D4(SF4), D8(SF8), D16(SF16), D32(SF32), D64(SF64), D128(SF128), D256(SF256), D512(SF512)
This parameter determines whether the compressed mode is limited to the downlink SF. Starting the compressed mode is resource consuming for the fast-moving UEs. Whether the spreading factors of the current DCH channels should be considered when the switch controlling the start compressed mode is set. When the switch is set to FALSE, you can infer that the start compressed mode does not consider the spreading factors of the DCH channels; when the switch is set to TRUE, you can infer that the start compressed mode considers the spreading factors of the DCH channels. Enumeration Type FALSE(Not Limited), TRUE(Limited)
CM implementation approach selection basis. When
the downlink spreading factor is greater than or equal
to this parameter value, the SF/2 approach will be
preferred. Otherwise, the high-layer scheduling will
be preferred.
The SF/2 approach consumes more system resources
and therefore this approach is recommended only for
low-rate users. The high-layer scheduling requires
variable multiplexing positions of transport channels
and is applicable to a relatively narrow range. In
addition, this approach affects the transmission rate of
users and therefore is recommended only when the
SF/2 approach is unavailable or there are high-rate
users.
Enumeration Type D8, D16, D32, D64, D128, D256
DL activity factor of SRB. Interval Type 0~100
DL activity factor of the R99 streaming service. Interval Type 0~100
This parameter specifies the default rate threshold for decision to use HS-DSCH to carry DL PS domain streaming services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HS-DSCH. Otherwise, it will be carried on DCH. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
Threshold E1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is higher than the upper threshold E1, AMRC lowers the DL AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater possibilities of meeting the requirement for lowering the AMR speech rate. Thus, it is easier to lower the AMR speech rate. Interval Type 0~559
Threshold E2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is lower than the upper threshold E2, AMRC stops adjusting the DL AMR speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less possibilities of meeting the requirement for stopping AMR speech rate adjustment. Thus, it is easier to lower the AMR speech rate. Interval Type 0~559
Threshold F1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is lower than the lower threshold F1, AMRC raises the DL AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less possibilities of meeting the requirement for raising the AMR speech rate. Thus, it is more difficult to raise the AMR speech rate. Interval Type 1~560
Threshold F2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement report is higher than the lower threshold F2, AMRC stops adjusting the DL AMR speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater possibilities of meeting the requirement for stopping AMR speech rate increase. Thus, it is more difficult to raise the AMR speech rate. Interval Type 1~560
When the algorithm 2 is used, this parameter defines the total equivalent user number corresponding to the 100% downlink load. he parameter should be related to the admission threshold and actual condition of the network. If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. Interval Type 1~200
Duration from when the VP TX power is beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power. Interval Type 1~6000
This parameter specifies the expected diff delay guard-band. (Unit: cells) Interval Type 3~505
This parameter specifies the blocked domain type. Enumeration Type PsBlk(BLOCK PS), CsAndPsBlk(BLOCK CS AND PS)
This parameter specifies whether the alarm reporting for door access is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
The DSP code must be input in hexadecimal format and cannot be 0. It is unique in the SS7 network. The number of the DSP code bits is equal to that of the OPC code bits. If the number of OSP code bits is BIT14, the value range of DSP code is from H'1 to H'3FFF (1~16383).If the number of OSP code bits is BIT16, the value range of DSP code is from H'1 to H'1~H'FFFF(1~65535). If BIT24, the value range is from H'1 to H'FFFFFF (1~16777215). Interval Type 1~16777215
This parameter specifies the number of consecutive subframes that can be transmitted on the UL DPCCH during one DtxCycle1. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D1, D2, D5
This parameter specifies the number of consecutive subframes that can be transmitted on the UL DPCCH during one DtxCycle2. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D1, D2, D5
This parameter specifies whether the DPCCH slot format 1 or DPCCH slot format 4 is used when all the traffic and signaling are transmitted over the HSPA channel and when the number of feedback information (FBI) bits is 0. Enumeration Type SLOT_FORMAT_1, SLOT_FORMAT_4
The DSP code must be input in divided number format. In addition, it should be allocated in the SS7 network and cannot be repeated. String Type -
This parameter indicates DPCH diversity mode for MIMO user. Enumeration Type None, STTD, CP1
This parameter indicates the TX diversity preferably selected by DPCH. Enumeration Type None, STTD, CP1
This parameter specifies the DL power control mode.
- SINGLE_TPC, a fast power control mode, indicates
that a unique TPC command is sent in each timeslot
on the DPCCH.
- TPC_TRIPLET_IN_SOFT, a slow power control
mode, indicates that the same TPC command is sent
over three timeslots. It is applicable to soft handover,
and it can decrease the power deviation.
- TPC_AUTO_ADJUST, an automatic adjustment
mode, indicates that the value of DPC_MODE can be
modified by sending the ACTIVE SET UPDATE
message to the UE.
For details of this parameter, refer to the 3GPP TS
25.214.
Enumeration Type SINGLE_TPC, TPC_TRIPLET_IN_SOFT, TPC_AUTO_ADJUST
Type of the DSP.
IUCS: indicating that the DSP is on the control plane
or user plane of the CS domain of the Iu interface
IUPS: indicating that the DSP is on the control plane
of the PS domain of the Iu interface
IUR: indicating an RNC signalling point
IUCS_ALCAP: indicating that the DSP is on the user
plane of the CS domain of the Iu interface
IUCS_RANAP: indicating that the DSP is on the
control plane of the CS domain of the Iu interface
STP: indicating a signalling transmission
point.AAL2SWITCH:indicating an ATM SWITCH.
Enumeration Type IUCS(Iu-CS node), IUPS(Iu-PS node), IUR(Iur node), IUCS_RANAP(Iu-CS RANAP node), IUCS_ALCAP(Iu-CS ALCAP node), AAL2SWITCH(Aal2 switch node), STP(STP node)
This parameter specifies the number of the destination port of the IP loopback test. Interval Type 1024~3584
This parameter specifies the number of the slot that holds the DPUb. Interval Type 8~19
Index of the DSP to be added.Uniquely identifying a DSP. Interval Type 0~118
This parameter specifies the direction of activating the check on a VCL. Enumeration Type SINK, SOURCE, BOTH
Dynamic resource allocation switch.
1) DRA_AQM_SWITCH: When the switch is on, the
active queue management algorithm is used for the
RNC.
2) DRA_BE_EDCH_TTI_RECFG_SWITCH: When
the switch is on, the TTI could be reconfigured to
HSUPA traffic dynamically between 2ms and 10ms.
3) DRA_BE_RATE_DOWN_BF_HO_SWITCH:
When the switch is on, the bandwidth for BE services
is reduced before soft handover. It is recommended
that the DCCC switch be on when this switch is on.
4) DRA_DCCC_SWITCH: When the switch is on,
the dynamic channel reconfiguration control algorithm
is used for the RNC.
5)
DRA_HSDPA_DL_FLOW_CONTROL_SWITCH:
When the switch is on, power control is enabled for
HSDPA services in AM mode.
6) DRA_HSDPA_STATE_TRANS_SWITCH: When
the switch is on, the status of the UE RRC that
carrying HSDPA services can be changed to
CELL_FACH at the RNC. If a PS BE service is
carried over the HS-DSCH, the switch
PS_BE_STATE_TRANS_SWITCH should be on
simultaneously. If a PS real-time service is carried
over the HS-DSCH, the switch
PS_NON_BE_STATE_TRANS_SWITCH should be
on simultaneously.
7) DRA_HSUPA_DCCC_SWITCH: When the switch
is on, the DCCC algorithm is used for HSUPA. The
DCCC switch must be also on before this switch takes
effect.
8) DRA_HSUPA_STATE_TRANS_SWITCH: When
the switch is on, the status of the UE RRC that
Bit Field Type DRA_AQM_SWITCH, DRA_BE_EDCH_TTI_RECFG_SWITCH, DRA_BE_RATE_DOWN_BF_HO_SWITCH, DRA_DCCC_SWITCH, DRA_HSDPA_DL_FLOW_CONTROL_SWITCH, DRA_HSDPA_STATE_TRANS_SWITCH, DRA_HSUPA_DCCC_SWITCH, DRA_HSUPA_STATE_TRANS_SWITCH, DRA_IU_QOS_RENEG_SWITCH, DRA_PS_BE_STATE_TRANS_SWITCH, DRA_PS_NON_BE_STATE_TRANS_SWITCH, DRA_R99_DL_FLOW_CONTROL_SWITCH, DRA_THROUGHPUT_DCCC_SWITCH
This parameter is used as the DRD Ec/No threshold
of whether to perform the blind handover.
This parameter is used as the DRD Ec/No threshold of
whether to perform the blind handover. When
choosing a DRD candidate cell, if the Ec/No value of
the current cell is greater than the threshold of inter-
RAT/inter-frequency neighboring cell, the DRD is
permitted.
Interval Type -24~0
A timer to DRNC wait for AAL2 setup indication. Interval Type 1~10000
A timer to DRNC wait for radio link reconfiguration commit. Interval Type 1~10000
This parameter specifies the maximum number of inter-RAT RAB directed retries. It decides the size of the candidate set for inter-RAT DRD. The value 0 indicates that inter-RAT RAB DRD is not applicable. This parameter can be cell-oriented. Interval Type 0~5
If the parameter is set to YES, QoS control for DL BE services based on RLC retransmission can be performed when the best cell is in the DRNC. Enumeration Type NO, YES
When the buffer duration of queue 0 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow control type is ATM, this parameter specifies the packet discard threshold of the CBR queue. Interval Type 10~150
When the buffer duration of queue 1 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow control type is ATM, this parameter specifies the packet discard threshold of the RTVBR queue. Interval Type 10~150
When the buffer duration of queue 2 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow control type is ATM, this parameter specifies the packet discard threshold of the NRTVBR queue. Interval Type 10~150
When the buffer duration of queue 3 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow control type is ATM, this parameter specifies the packet discard threshold of the UBR queue. Interval Type 10~150
When the buffer duration of queue 4 is larger than or equal to the value of this parameter, packets begin to be discarded. When the port flow control type is ATM, this parameter specifies the packet discard threshold of the UBR+ queue. Interval Type 10~150
When the buffer duration of queue 5 is larger than or equal to the value of this parameter, packets begin to be discarded. Interval Type 10~150
Direct retry switch.
1) DR_RRC_DRD_SWITCH(DRD switch for RRC
connection): When the switch is on, DRD and
redirection is performed for RRC connection if retry is
required.
2) DR_RAB_SING_DRD_SWITCH(DRD switch for
single RAB): When the switch is on, DRD is
performed for single service if retry is required.
3) DR_RAB_COMB_DRD_SWITCH(DRD switch
for combine RAB): When the switch is on, DRD is
performed for combined services if retry is required.
Bit Field Type DR_RRC_DRD_SWITCH, DR_RAB_SING_DRD_SWITCH, DR_RAB_COMB_DRD_SWITCH
This parameter specifies the size of patterns (that is, the number of subframes) that can be received on the HS-SCCH. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D4, D5, D8, D10, D16, D20
This parameter specifies the UTRAN-specific
Discontinuous Reception (DRX) cycle length
coefficient. In connected mode, the UE uses the
shorter one between CN-specific DRX cycle length
coefficient and UTRAN-specific DRX cycle length
coefficient. In idle mode, the UE can use the DRX
mode to receive paging indications so as to reduce
power consumption; in this case, the UE needs to
monitor only one paging indication in one paging
occasion during each DRX cycle.
- If the value of this parameter is too small, the UE
checks the paging channel frequently, thus having
great power consumption.
- If the value of this parameter is too large, the
response of the UE to the paging becomes slow, and
the core network may repeatedly page the UE and thus
increase the downlink interference.
Interval Type 3~9
CN domain specific DRX cycle length coefficient broadcast on SIB1 and used by UEs in Idle Mode. Interval Type 6~9
This parameter specifies whether the UE should monitor the transmission on the E-AGCH in the serving EDCH cell and the transmission on each E-RGCH in the serving EDCH radio link set if the data reception on the HS-SCCH overlaps with the data reception on the E-AGCH and on the E-RGCH. The value of this parameter is a Boolean value. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type TRUE, FALSE
This parameter specifies whether the parameters related to the DRX are valid. The parameters related to the DRX are optional and they can be set only when the parameters related to the DTX are set. Value OFF indicates that the parameters are invalid and cannot be set. Value ON indicates that the parameters are valid. Enumeration Type ON, OFF
This parameter specifies the number of the E1/T1 port bearing the PPP link. Interval Type 0~31
Whether to enable the automatically triggered DSAC algorithm. Enumeration Type OFF, ON
This parameter specifies the DiffServ Code Point for the ping command. Interval Type 0~63
This parameter specifies the number of a DSP. Interval Type 0~21
This parameter specifies whether the DST is used. Enumeration Type YES, NO
This parameter specifies the destination end of timeslot cross connection, corresponding to the electrical port of the board. Interval Type 0~31
This parameter specifies a destination IP address. IP Address Type -
This parameter specifies a subnet mask. IP Address Type -
This parameter specifies the subnet mask. IP Address Type -
This parameter specifies the number of the destination end of timeslot cross connection. Enumeration Type TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), TS30(Time_slot_30), TS31(Time_slot_31)
This parameter specifies the size of pattern 1 transmitted on the UL DPCCH. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D1, D4, D5, D8, D10, D16, D20
This parameter specifies the size of pattern 2 transmitted on the UL DPCCH. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D4, D5, D8, D10, D16, D20, D32, D40, D64, D80, D128, D160
This parameter specifies the delay time for DTX DRX being effective after it is enabled. For details, see 3GPP TS 25.331. Enumeration Type D0, D1, D2, D4, D8, D16, D32, D64, D128
If the interval at which two consecutive patterns are transmitted on the UL DPCCH is DtxCycle2, a certain number of timeslots should be transmitted before data is transmitted on the DPCCH. This parameter specifies the number of timeslots. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D2, D4, D15
This parameter specifies whether the parameters related to the DTX are valid. Value OFF indicates that the parameters are invalid and cannot be set. Value ON indicates that the parameters are valid. Enumeration Type ON, OFF
This parameter specifies the duplex mode of the transmission over the Ethernet port. This parameter can be set only when "Auto negotiation" is set to DISABLE. Enumeration Type Half(Half duplex), Full(Full duplex)
When the cell is automatically shut down, this parameter is used to repeatedly determine whether the cell needs to be automatically enabled. Interval Type 1~3600
When the cell is automatically enabled, the cell can be automatically disabled again only after a period delay. Interval Type 60~3600
When the switch is on, the Cell dynamic shutdown algorithm of the local RNC cell is enabled. When the switch is off, the Cell dynamic shutdown algorithm of the local RNC cell is disabled. Enumeration Type OFF(switch off), ON(switch on)
When the switch is on, the "Cell dynamic shutdown" feature is valid. Enumeration Type OFF(switch off), ON_1(switch on1), ON_2(switch on2), ON_3(switch on3)
When DynShutDownType is set to ForceShutDown, the cell will shut down in the shutdown time interval. When DynShutDownType is set to ConditionalShutDown, the cell will shut down with some conditions in the shutdown time interval. Enumeration Type FORCESHUTDOWN(ForceShutDown), CONDITIONALSHUTDOWN(ConditionalShutDown)
This parameter specifies the number of the E1/T1 link that carries the fractional ATM/IMA link. Interval Type 0~31
Period of E-DCH throughput ratio measurement. This parameter specifies the period of E-DCH throughput ratio measurement. The throughput ratio over the E-DCH is periodically measured to implement state transition from E-DCH to FACH and DCCC algorithm on EDCH. Interval Type 1~10000
Number of pending periods after the throughput ratio event 4B for state transition from E-DCH to FACH is triggered. This parameter is used to prevent too many throughput ratio events 4B being reported. Pending time after the throughput ratio event 4B is triggered = value of this parameter x 10 ms. Interval Type 0~1023
This parameter is used to check whether the UE in the low activity state. If the UE is on the E-DCH channel, the low activity counter increases by 1 every time throughput ratio event 4B is reported. Interval Type 0~384
Number of periods before the throughput ratio event 4B for state transition from E-DCH to FACH is triggered. When the throughput ratio is below the lower threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary throughput ratio events that are caused by throughput ratio instability from being triggered. Time to trigger the throughput ratio event 4B = value of this parameter x 10 ms. Interval Type 0~1023
The parameter specifies the number of codes (SF=256) used by the E-DCH Absolute Grant Channel (E-AGCH). If the parameter value is set too high, the downlink codes are wasted. If the parameter value is set too low, the uplink throughput of the HSUPA is restricted. For details about this parameter, refer to 3GPP TS 25.433. Interval Type 1~8
Check IP address. The IP address to be checked must be within the network segment specified by [Peer IP address] and [Peer subnet mask]. IP Address Type -
This parameter is used to count the adjusted step of Ec/N0 in the link quality adjust algorithm for E-FACH. Interval Type 0~5000
This parameter specifies the adjustment cycle of Ec/N0. This parameter is also used to determine the measurement period of the RLC retransmissions in the link quality adjust algorithm for E-FACH. Interval Type 1~1000
This parameter specifies the time duration when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting from the time when the RRC connection request is initiated) specified by this parameter. Check whether the reported Ec/N0 is valid before comparing it with EcN0Ths. Interval Type 0~65535
This parameter specifies the maximum value that Ec/N0 can be stepped down in the link quality adjust algorithm for E-FACH. Interval Type 0~5000
This parameter specifies the maximum value that Ec/N0 can be stepped up in the link quality adjust algorithm for E-FACH. Interval Type 0~5000
This parameter specifies the threshold for determining the signal quality in a cell. If the reported Ec/N0 exceeds the value of this parameter, you can infer that the signal quality in the cell is good and a high code rate can be set for initial access. Interval Type 0~49
This parameter specifies the end date of the DST. The value 30 and 31 is invalid in February. Interval Type 1~31
This parameter specifies the first MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the tenth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the eleventh MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the twelfth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the second MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the third MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the fourth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the fifth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the sixth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the seventh MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the eighth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the ninth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the number of sizes of E-DCH MAC-d PDUs. Currently, only VoIP services can be configured with multiple PDU sizes. Other services can have only one PDU size. Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12
This parameter specifies the number of measurement periods during which no event 4A related to E-DCH throughput is reported again after such an event 4A is reported. This parameter is set to avoid too many channel reconfiguration operations. The larger the value of this parameter, the longer the time from the last reporting of throughput-related event 4A on E-DCH to the next reporting, and the smaller the possibility of triggering throughput-related event 4A on E-DCH. Interval Type 0~1023
This parameter specifies the number of measurement periods during which no event 4B related to E-DCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel reconfiguration operations. The larger the value of this parameter, the longer the time from the last reporting of throughput-related event 4B on E-DCH to the next reporting, and the smaller the possibility of triggering throughput-related event 4B on E-DCH. Interval Type 0~1023
HSUPA UL rate adjustment set. It contains rates for rate adjustment and is used in the HSUPA DCCC algorithm. Bit Field Type RATE_8KBPS, RATE_16KBPS, RATE_32KBPS, RATE_64KBPS, RATE_128KBPS, RATE_144KBPS, RATE_256KBPS, RATE_384KBPS, RATE_608KBPS, RATE_1440KBPS, RATE_2048KBPS, RATE_2880KBPS, RATE_5740KBPS
This parameter specifies the maximum allowed SIR decrease step for HSUPA within an adjustment period of outer-loop power control. Interval Type 0~5000
The large target retransmit times for E-DCH MAC-ES PDU used to bear the service. Interval Type 0~15000
The little target retransmit times for E-DCH MAC-ES PDU used to the normal service. Interval Type 0~15000
This parameter specifies the number of measurement periods from the moment when the E-DCH rate exceeds the 4A threshold to the moment when the throughput-related event 4A on E-DCH is triggered. This parameter is used to avoid unnecessary reports triggered by E-DCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of the E-DCH uplink throughput exceeding the 4A threshold, and the smaller the possibility of triggering throughput-related event 4A on E-DCH. Interval Type 0~1023
This parameter specifies the number of measurement periods from the moment when the E-DCH rate falls below the 4B threshold to the moment when the throughput-related event 4B on E-DCH is triggered. This parameter is set to avoid unnecessary reports triggered by E-DCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of the E-DCH uplink throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughput-related event 4B on E-DCH. Interval Type 0~1023
This parameter specifies the E-DCH TTI type. Enumeration Type EDCH_10MS, EDCH_2MS
EFACH channel forward factor. Interval Type 0~100
This parameter specifies the minimum guaranteed power of the DTCH mapped onto the EFACH. Interval Type -350~150
E_FACH support indicator. When the indicator is TRUE, it indicates that the cell supports E_FACH. Enumeration Type TRUE, FALSE
This parameter specifies whether the RRC connection is established preferentially on the E-FACH. If this parameter is set to ON and both the UE and the serving cell support E-FACH, then the RRC connection is established preferentially on the E-FACH, regardless of the setting of SigChType. According to the related protocols, the UE cannot transmit signals over the FACH if both the UE and the cell support E-FACH. Thus, if this parameter is set to OFF and both the UE and the serving cell support E-FACH, then the RRC connection can only be established on the non-FACH, regardless of the setting of SigChType. Enumeration Type OFF, ON
This parameter specifies whether the compressed mode can be enabled for the HSPA+ service. When the parameter is set to TRUE, the compressed mode can be enabled for the HSPA+ service. When the parameter is set to FALSE, the uplink and downlink must return to the DCH before the compressed mode is enabled on for the HSPA+ service. This switch is set for compatibility with the HSPA+ terminals that might exist in the network because these terminals do not support the enabled compressed mode for the HSPA+ service. Enumeration Type FALSE(Forbidden), TRUE(Permit)
This parameter specifies the type of the end date. DATE indicates that the DST starts from a certain day. WEEK indicates that the DST starts from a certain week. DATEWEEK indicates that the DST starts from a certain day in a certain week. Enumeration Type DATE, WEEK, DATEWEEK
When the switch is enabled, users of emergency call can preempt all the users of non emergency call. When the switch is disabled, users of emergency call can only preempt users of non emergency call with the preempted attributes. Enumeration Type OFF, ON
It indicates whether verification is needed in the case of establishment of a signalling link in a link set. The value ON indicates that verification is not needed in an emergency. The value OFF indicates that verification is needed in a common case. Enumeration Type OFF, ON
This parameter specifies whether the RNC specially handles the LCS requests of emergency calls. In other words, the RNC provides highly accurate location for emergency calls regardless of license constraints. Enumeration Type OFF, ON
This parameter specifies the end month of the DST. Enumeration Type JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
This parameter specifies the IP address for the EMS. IP Address Type -
The encryption algorithm supported by RNC. Both UEA0 and UEA1 can be selected at one time. Bit Field Type UEA0, UEA1
End time of the first interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN
End time of the second interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN
End time of the third interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN
Type of the M3UA destination entity. Enumeration Type M3UA_SGP(M3UA SPG), M3UA_IPSP(M3UA IPSP), M3UA_SS7SP(M3UA SS7SP), M3UA_SP(M3UA SP)
This parameter specifies the number of detected error frames received in error frame events. Interval Type 1~1000
This parameter specifies the period of detecting error frame events. Interval Type 1~60
This parameter specifies the number of detected error frames received in error frame events. Interval Type 1~1000
This parameter specifies the period of detecting error frame events. Interval Type 1~4294967295
This parameter specifies the number of detected error frames received in error frame events. Interval Type 1~900
This parameter specifies the period of detecting error frame events. Interval Type 10~900
The parameter specifies the number of codes
(SF=128) used by the E-DCH Relative Grant Channel
(E-RGCH)/E-DCH Hybrid ARQ Indicator Channel (E-
HICH). The E-RGCH is used to adjust the uplink
power available for the UE. The E-HICH is used to
provide feedback on the ACK/NACK information,
which indicates whether the data that the RNC
receives from the E-DCH is correct or not. The E-
RGCH and E-HICH are dedicated channels shared by
multiple UEs. They share the OVSF channel code
with SF=128 and use the orthogonal signature
sequence to differentiate subscribers.
If the parameter value is set too high, the downlink
codes are wasted. If the parameter value is set too low,
the uplink throughput of the HSUPA is restricted. For
details about this parameter, refer to 3GPP TS 25.433.
Interval Type 1~8
AAL2 connection establishment indication timer.This timer is started when an AAL2 signaling entity sends the service user an indication for establishing an AAL2 connection. Interval Type 5000~30000
AAL2 connection establishment request timer.This timer is started when an AAL2 signaling entity sends the peer node a request for establishing an AAL2 connection. Interval Type 5000~30000
This parameter specifies the end time of the DST. Compound Type HOUR, MIN, SEC
This parameter specifies the threshold to trigger event 4A related to DCH traffic volume, that is, the upper limit of the traffic volume. The larger the value of this parameter, the smaller the possibility of triggering traffic-related event 4A on DCH. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2K, D3K, D4K, D6K, D8K, D12K, D16K, D24K, D32K, D48K, D64K, D96K, D128K, D192K, D256K, D384K, D512K, D768K
This parameter specifies the threshold to trigger event 4B related to DCH traffic volume, that is, the lower limit of the traffic volume. The smaller the value of this parameter, the smaller the possibility of triggering traffic-related event 4B on DCH. Enumeration Type D8, D16, D32, D64, D128, D256, D512, D1024, D2K, D3K, D4K, D6K, D8K, D12K, D16K, D24K, D32K, D48K, D64K, D96K, D128K, D192K, D256K, D384K, D512K
This parameter specifies the event A reporting period. It refers to the delay from the moment when event A is triggered to the moment when the event is reported. Interval Type 0~1000
This parameter specifies the threshold of event A, that is, the upper limit of RLC retransmission ratio. Interval Type 0~1000
This parameter specifies the threshold of event B, that is, the lower limit of RLC retransmission ratio. Interval Type 0~1000
This parameter specifies the DST start day in a week. Enumeration Type SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday)
This parameter specifies the DST end week in a month.Enumeration Type FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last)
This parameter specifies the upper threshold for signal output of external analog 1(unit:ampere/volt). String Type -
This parameter specifies the lower threshold for signal output of external analog 1(unit:ampere/volt). String Type -
This parameter specifies the sensor type of external analog 1. Enumeration Type VOLTAGE(Voltage), CURRENT(Current)
This parameter specifies the upper threshold for measurement range of external analog 1. String Type -
This parameter specifies the lower threshold for measurement range of external analog 1. String Type -
This parameter specifies the upper threshold for signal output of external analog 2(unit:ampere/volt). String Type -
This parameter specifies the lower threshold for signal output of external analog 2(unit:ampere/volt). String Type -
This parameter specifies the sensor type of external analog 2. Enumeration Type VOLTAGE(Voltage), CURRENT(Current)
This parameter specifies the upper threshold for measurement range of external analog 2. String Type -
This parameter specifies the lower threshold for measurement range of external analog 2. String Type -
This parameter specifies the upper threshold for signal output of external analog 3(unit:ampere/volt). String Type -
This parameter specifies the lower threshold for signal output of external analog 3(unit:ampere/volt). String Type -
This parameter specifies the sensor type of external analog 3. Enumeration Type VOLTAGE(Voltage), CURRENT(Current)
This parameter specifies the upper threshold for measurement range of external analog 3. String Type -
This parameter specifies the lower threshold for measurement range of external analog 3. String Type -
This parameter specifies the upper threshold for signal output of external analog 4(unit:ampere/volt). String Type -
This parameter specifies the lower threshold for signal output of external analog 4(unit:ampere/volt). String Type -
This parameter specifies the sensor type of external analog 4. Enumeration Type VOLTAGE(Voltage), CURRENT(Current)
This parameter specifies the upper threshold for measurement range of external analog 4. String Type -
This parameter specifies the lower threshold for measurement range of external analog 4. String Type -
Pending time after the traffic volume event 4B is reported. This parameter is used to prevent too many traffic volume events 4B being reported. Enumeration Type D250, D500, D1000, D2000, D4000, D8000, D16000
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Uniquely identifying a FACH in a cell. Interval Type 1~32
ID of the transport channel carrying the MCCH. Interval Type 1~32
This parameter specifies the maximum power of the FACH. Interval Type -350~150
Indicating whether the FACH measurement occasion period length coefficient should be delivered through the system information. If the inter-freq or inter-RAT measurement control information is broadcast through the system information, some UEs in CELL_FACH state need the FACH measurement occasion period length coefficient for measurement. When [Inter-freq/Inter-RAT Meas Ctrl Info Ind] is set to NOT_REQUIRE, this parameter is not required. This parameter need not be configured when there is no inter-RAT or intra-frequency cells. To have the UE perform inter-frequency or inter-RAT cell reselection, the FACH measurement indicator needs to be configured. Enumeration Type REQUIRE, NOT_REQUIRE
This parameter defines the reduce value in reducing FACH power Action. Interval Type 0~30
This parameter specifies the factor associated with the scheduling priority indicator. This factor is used to calculate the step of rate upsizing. Interval Type 0~100
This parameter specifies the activity factor. The configured bandwidth of the CCP, NCP, ALCAP, or OM link IPoA PVC multiplied by the activity factor is the bandwidth of the link. Interval Type 0~100
This parameter specifies the threshold of allowed times of rate increase consecutive failure within a certain monitoring period. Increase of the BE service rate is triggered by the report on 4A measurement that is performed in the UL and the DL separately. If the times of failure is beyond this threshold, subsequent rate increase is not allowed even if the 4A measurement report is received. Interval Type 1~255
This parameter specifies whether to send and receive flow control frame in the Ethernet. It indicates whether to enable the flow control. Enumeration Type ENABLE, DISABLE
This parameter specifies the flow control parameter index. Interval Type 0~1999
This parameter specifies the CRC check mode. Enumeration Type None, 16bit, 32bit
This parameter specifies the step size of the closed-loop power control performed on DL DPCH in Frequency Division Duplex (FDD) mode. For details of this parameter, refer to the 3GPP TS 25.214. Enumeration Type STEPSIZE_0.5DB, STEPSIZE_1DB, STEPSIZE_1.5DB, STEPSIZE_2DB
This parameter indicates FDPCH diversity mode for MIMO user. Enumeration Type None, STTD
This parameter indicates FDPCH diversity mode for non MIMO user. Enumeration Type None, STTD
This parameter specifies the maximum reference power for the F-DPCH. This parameter indicates the maximum value of reference F-DPCH TX power, that is, the value of the Maximum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433. Interval Type -350~150
This parameter specifies the minimum reference power for the F-DPCH. This parameter indicates the minimum value of reference F-DPCH TX power, that is, the value of the Minimum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433. Interval Type -350~150
This parameter specifies the power offset of TPC command in F-DPCH channel to reference F-DPCH TX power (expressed by the Initial DL Transmission Power IE). Interval Type 0~24
This parameter specifies the FE IP address for the DHCP server. IP Address Type -
This parameter specifies the name used to save the exported file. This name should not contain the directory. String Type -
This parameter specifies the path for saving the exported file. String Type -
According to the 3GPP TS 25.331, the filtering of the
measurement value is calculated using the following
formula, where k represents this parameter:
Fn = (1 - a) * Fn - 1 + a * Mn
Here,
Fn: the updated filtered measurement result
Fn - 1: the old filtered measurement result
Mn: the latest received measurement result from
physical layer measurements
a = (1/2)(k/2). When a is set to 1, this means L3
filtering will not be applied.
L3 filtering should be able to filter as much random
impulse as possible. Thus the filtered measurement
value can reflect the varying of the actual
measurement value. The input measurement value to
L3 filter has been filtered by L1 filter, where the
impact of fast fading is almost eliminated. So the L3
filtering should apply smooth filtering to shadow
fading and small amount of remaining fast fading,
thus providing more reliable measurement value for
event judgement.
As for the impact on network performance:
the larger the value of this parameter, the stronger the
smoothing effect and the higher the anti-fast-fading
capability, but the lower the signal tracing capability,
the greater the possibility of call drops. If the value of
this parameter is too small, unnecessary soft handover
or the ping-pong handover may occur.
Note that this parameter has great impact on the
overall performance of the handover, so you should be
cautious when adjusting this parameter.
Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
L3 filtering coefficient for event 2D or event 2F
measurement.
The larger the value of this parameter, the stronger the
smoothing effect and the higher the anti-fast-fading
capability, but the lower the signal change tracing
capability. If the value of this parameter is set too
small, unnecessary inter-system handovers may occur.
The parameter has the same physical meaning and
measurement model as the inter-frequency
measurement L3 filter coefficient. The report period is
480 ms. For specific analysis, refer to the intra-
frequency measurement layer 3 filter coefficients and
inter-frequency measurement layer 3 filter
coefficients.
The recommended values of the inter-RAT
measurement layer 3 filter coefficients in different
cells are as follows:
-In cells where the average moving speed of UEs is
low, there is a comparatively big shadow fading
square error, so the recommended value of inter-RAT
measurement layer 3 filter coefficients is 4. The value
can be increased in a certain degree;
-In cells where the average moving speed of UEs is
medium, there is a comparatively big shadow fading
square error, so the recommended value of inter-RAT
measurement layer 3 filter coefficients is 3;
-In cells where the average moving speed of UEs is
high, there is a comparatively small shadow fading
square error, so the recommended value of inter-RAT
measurement layer 3 filter coefficients is 2.
Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
This parameter specifies the fixed MAC-hs window size. It is valid when the [Is MAC-hs window size fixed or not] parameter is set to TRUE. Enumeration Type D4, D6, D8, D12, D16, D24, D32
Switch of the FLC algorithm. The FLC is a mandatory algorithm used in the multi-frequency network to guarantee that UEs camping on other frequencies can reselect the current frequency to receive the MBMS service. Therefore, the switch is on by default. Enumeration Type OFF(OFF), ON(ON)
This parameter specifies whether the switch of flow control on the link is turned on. Enumeration Type OFF, ON
This parameter specifies the flow ID. Interval Type 0~299
This parameter specifies the file name. The license file must be saved in \FTP\License. If the file name is not specified, the latest license file in \FTP\License is activated through this command. String Type -
This parameter specifies the file name. String Type -
When the CELLID+RTT method is selected, this parameter specifies whether forced soft handover is performed if the number of RTT measured result is smaller than 3. After soft handover is complete, accuracy of the CELLID+RTT method is enhanced when the RNC obtains more radio links. Enumeration Type OFF, ON
Indicating whether to check the link of the IP path with FPMUX. Only FG2a and GOUa board support FPMUX. Enumeration Type NO, YES
FPTIMER. Interval Type 1~10
This parameter specifies the MP flake size. Interval Type 128~1024
This parameter specifies the number of a fractional ATM/IMA link. Interval Type 0~31
This parameter specifies the type of a fractional link. Enumeration Type FRAATM, FRAIMA
The longer a TX frame is, the higher the transmission efficiency is but the less the sensitivity against error is. Enumeration Type D32, D64, D128, D256
Index of the factor table used by the current adjacent node. Interval Type 0~33
Factor table index. Interval Type 1~33
Function switch 1. Bit Field Type PDCP(PDCP header compress), AMRC(AMR voice coding rate control), TFOTRFO(TFO/TrFO), INDIRECRETRY(Intra system direct retry), INTERRATDIRECRETRY(Inter system direct retry), INTERRATREDIRECT(Inter system redirect), CBS(Cell broadcast service), CELLID(CELL ID LCS), OTDOA(OTDOA LCS), AGPS(AGPS LCS), PUC(Potential user control), INTRACELLLDB(Intra frequency load balancing), INTERCELLLDB(Inter frequency load balancing), MULTIRAB(Multiple RAB), HCS(Hierarchical cell structure), RABDOWNSIZING(RAB downsizing at admission control), QCPE(Queuing and pre-emption), INTERSERVICEHO(Inter system Service Handover), INTERLOADHO(Inter system load handover), IUQOSRENEG(RAB quality of service renegotiation over IU), LCSCZ(LCS Classified Zones), HSDPA(HSDPA), IUFLEX(IU FLEX), IUBSC(Satellite communication in Iub interface), IUBIP(IP transportation in Iub interface), MBMS(MBMS Function)
Function switch 2. Bit Field Type WBAMR(Wide band AMR), HSUPA(HSUPA), RANSHARE(RAN sharing), HSDPA3.6M(HSDP3.6M), HSDPA7.2M(HSDPA7.2M), ROHC(PDCP ROHC Function), IURLC(LCS over Iur), NACC(Network Assisted Cell Change), PSHBUG(PS Handover Between UMTS and GPRS), IMSIBH(IMSI Based Handover), 32HSDPAUPERCELL(32 HSDPA Users per Cell), 64HSDPAUPERCELL(64 HSDPA Users per Cell), STMTRAONHSDPA(Streaming Traffic Class on HSDPA), HSDPASTATETRAN(HSDPA State Transition), HSDPADRD(HSDPA DRD), ENHANCEDIUFLEX(Enhanced Iu Flex), STMTRAONHSUPA(Streaming Traffic Class on HSUPA), ATMIPDUALSTACK(IUB ATM/IP Dual Stack Transportation Function), IPTRANINIUR(IP Transportation in Iur Interface ), IPTRANINIU(IP Transportation in Iu Interface), FRACTIONALIP(Fractional IP), IPIUBOVERBOOKING(IP IUB overbooking Function), FRACTIONALATM(Fractional ATM), ATMOVERBOOKING(ATM IUB overbooking Function), IUBHYBRIDIPTRAN(IUB Hybrid IP Transportation Function), MBMS8CHANNELPERCELL(MBMS 8 Channels per Cell), 256KBPSCHNLRATEONMBMS(256Kbps Channel Rate on MBMS), MBMSFLCFLD(MBMS FLC
Function switch 3. Bit Field Type SRNSRWCUPDATE(SRNS Relocation with Cell/URA Update), LOSSLESSSRNSRELCT(Lossless SRNS Relocation), INTERFREQHARDHNDV(Inter frequency hard handover), IMPRVEDWNLNKCVRGE(Improved Downlink Coverage), ACRWHENSPUOVER(Access Class Restriction when SPU overload), CBWHENIUIFAULT(Cell Barring when IU in fault), 3G2GCOMMON_LOAD(3G/2G Common Load Management), FP_MUX(FP MUX), HSDPA_OVER_IUR(HSDPA over Iur), HS_DPCCH_PREAMBLE_SUPPORT(HS-DPCCH Preamble support), HSUPA_5_74MBPS(HSUPA 5.74Mbps per User), HSUPA_OVER_IUR(HSUPA over Iur), HUB_IUB_OVERBOOKING(HUB IUB overbooking Function), IMS_SIGNALING_OVER_HSPA(IMS Signaling over HSPA), DYN_BANDWIDTH_CTROL_IUB_IP(Dynamic Bandwidth Control of Iub IP), MBMS_OVER_IUR(MBMS over Iur), MBMS_PTP_OVER_HSDPA(MBMS PTP over HSDPA), MBMS_ENHANCED_BROADCAST(MBMS Enhanced Broadcast Mode), MBMS_ADMISSION_ENHANCE(MBMS Admission Enhancement), RAN_SHARING_ENHANCED_PACKAGE(RAN Sharing Enhanced Package), SRB_OVER_HSDPA(SRB over HSDPA), SRB_OVER_HSUPA(SRB over HSUPA), MULTI_FBNM(Multi Frequency Ban
Function switch 4. Bit Field Type DYNAMIC_POWER_ESTIMATION_FOR_MTCH(Dynamic Power Estimation for MTCH), ONE_TUNNEL(One Tunnel), MULCAR_SWOFF_BASEDON_TRALOAD(Multi-carrier switch off based on traffic load), CS_OVER_HSPA(CS voice over HSPA), VOIP_OVER_HSPA(VoIP over HSPA Introduction Pakage), 96_HSDPA_USERS_PER_CELL(96 HSDPA Users per Cell), HSPA_DOWN28_PER_USER(HSPA + Downlink 28 Mbit/s Per User), HSPA_DOWN21_PER_USER(HSPA + Downlink 21 Mbit/s Per User), 96_HSUPA_USERS_PER_CELL(96 HSUPA Users per Cell), MSCH_SCHEDULING(MSCH Scheduling), MBMS_CHANNEL(MBMS Channel Audience Rating Statistics), ENHANCED_CELL_FACH(Enhanced CELL_FACH), CPC_HS_SCCH(CPC-HS-SCCH Less Operation), CPC_DTX_DRX(CPC-DTX / DRX), UPLINK_MACRO_RECEIVE(Uplink Macro Diversity Intelligent Receiving), DOMAIN_ACCESS_CONTROL(Domain Specific Access Control (DSAC)), SERVICE_IN_RRC(Service Steering in RRC Connection Setup), TCP_ACCELERATOR(TCP Accelerator), UPLINK_CONTROL_OF_USER(Uplink Flow Control of User Plane), MOCN_PACKAGE(MOCN Introduction Package), IUCS_UDP_MUX(UDP MUX for Iu-C
When the remaining transmit bandwidth is smaller than or equal to this parameter value, the forward congestion alarm is triggered. Interval Type 0~1000000
This parameter specifies the remaining bandwidth threshold for generating the forward congestion alarm. Interval Type 0~149000
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted. Interval Type 0~320000
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted. Interval Type 0~3000000
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted. Interval Type 0~4000000
When the remaining transmit bandwidth is greater than this parameter value, the forward congestion alarm is cleared. Interval Type 0~1000000
This parameter specifies the forward congestion clear threshold. When the remaining bandwidth reaches this parameter value, the forward congestion alarm is cleared. Interval Type 0~200000
This parameter specifies the remaining bandwidth threshold for clearing the forward congestion. Interval Type 0~149000
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared. Interval Type 0~320000
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared. Interval Type 0~3000000
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared. Interval Type 0~4000000
This parameter specifies the transmit bandwidth reserved for the user in handover. Interval Type 0~1000000
This parameter specifies the bandwidth reserved for the forward handover. Interval Type 0~149000
Reserved forward bandwidth for handover user. Interval Type 0~320000
Reserved forward bandwidth for handover user. Interval Type 0~3000000
Reserved forward bandwidth for handover user. Interval Type 0~4000000
The power occupancy factor of the control part. For detailed information of this parameter, refer to 3GPP TS 25.214. Interval Type 1~15
The power occupancy factor of the data part. For detailed information of this parameter, refer to 3GPP TS 25.214. Interval Type 0~15
This parameter specifies the IP address for the check. IP Address Type -
Geo-coordinate data format, DEG or SEC. Enumeration Type DEG(Degree), SEC(Degree Minute and Second)
This parameter specifies the geographical coordinate data format (GCDF), either in degrees or in the form of degree:minute:second. Enumeration Type DEG(DEG), SEC(SEC)
General common channel service downlink factor. Interval Type 0~100
General common channel service uplink factor. Interval Type 0~100
Maximum rate of the wideband AMR speech service for gold users. Enumeration Type WBAMR_BITRATE_6.60K, WBAMR_BITRATE_8.85K, WBAMR_BITRATE_12.65K, WBAMR_BITRATE_14.25K, WBAMR_BITRATE_15.85K, WBAMR_BITRATE_18.25K, WBAMR_BITRATE_19.85K, WBAMR_BITRATE_23.05K, WBAMR_BITRATE_23.85K
Maximum rate of the narrowband AMR speech service for gold users. Enumeration Type NBAMR_BITRATE_4.75K, NBAMR_BITRATE_5.15K, NBAMR_BITRATE_5.90K, NBAMR_BITRATE_6.70K, NBAMR_BITRATE_7.40K, NBAMR_BITRATE_7.95K, NBAMR_BITRATE_10.20K, NBAMR_BITRATE_12.20K
Indicates whether gold users involve in the switch of congestion control. According to the policy set for gold users by operators, if service quality of gold users should be guaranteed even in resource congestion, the switch should be disabled. If the switch is enabled, LDR such as rate reduction and handover also occurs on gold users even in cell resource congestion, which impacts user service quality. If the switch is disabled, no action is performed on gold users. Enumeration Type OFF(OFF), ON(ON)
This parameter specifies the period of reporting the GPS data. Interval Type 1~60
Number of the transport resource group. Interval Type 0~119
Type of the transport resource group. Type of the transport resource group. Enumeration Type ATM, IP
Uniquely identifying a GSM cell. Interval Type 0~65535
A name identifying a GSM cell uniquely. String Type -
When event 5A is triggered, a pending timer is started, during which event 5A will not be reported before the specified number is reached. This parameter can control the frequency for reporting event 5A. Interval Type 1~512
This parameter specifies the Happy bit rate of the best-effort (BE) service with different user priorities. The Happy bit rate is the private information element on the Iub interface and it is used for the flow control by the NodeB. When resource is limited,the user rate reach the Happy bit rate,the user's scheduling priority will be reduced.When Happy bit rate is set to 0,the Happy bit rate function is closed. Interval Type 0~5000
This parameter indicates whether the cell of the neighboring RNC supports the HARQ Preamble capability. Mode1 means the cell supports the HARQ Preamble capability, whereas Mode0 means not supporting it. Enumeration Type Mode0, Mode1
This parameter specifies the time used for decision of HSUPA happy bit. The decision is based on whether all the buffered user data can be transmitted at the current rate during the time specified by this parameter. Enumeration Type D2, D10, D20, D50, D100, D200, D500, D1000
It can be used to calculate the heartbeat interval of the idle SCTP server. Interval Type 1000~600000
This parameter specifies the type of link that carries
the high-end VPL/VCL cross connection.
GUI value range: UNI, IMA, FRAATM, NCOPT. Enumeration Type UNI, IMA, FRAATM, NCOPT
This parameter is used for setting the punish timer length for adjusting hsdpa code again. Interval Type 0~300
HCS priority of the cell belongs to. The parameter depends on HCS rules. For details, refer to 3GPP TS 25.304. Interval Type 0~7
HSDPA background service downlink factor. Interval Type 0~100
HSDPA background primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA background bearing primary path load threshold. Interval Type 0~100
HSDPA background secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA background primary secondary path load ratio threshold. Interval Type 0~100
HSDPA conversational service downlink factor. Interval Type 0~100
HSDPA conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA conversational bearing primary path load threshold. Interval Type 0~100
HSDPA conversational secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA conversational primary secondary path load ratio threshold. Interval Type 0~100
HSDPA high priority interactive bearing primary path load threshold. Interval Type 0~100
HSDPA high priority interactive primary secondary path load ratio threshold. Interval Type 0~100
HSDPA interactive service downlink factor. Interval Type 0~100
HSDPA high PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA high PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA low PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA low PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA middle PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA middle PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA low priority interactive bearing primary path load threshold. Interval Type 0~100
HSDPA low priority interactive primary secondary path load ratio threshold. Interval Type 0~100
HSDPA middle priority interactive bearing primary path load threshold. Interval Type 0~100
HSDPA middle priority interactive primary secondary path load ratio threshold. Interval Type 0~100
HSDPA IMS downlink factor. Interval Type 0~100
HSDPA Signal primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA IMS Signal bearing primary path load threshold. Interval Type 0~100
HSDPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA IMS Signal primary secondary path load ratio threshold. Interval Type 0~100
HSDPA SRB downlink factor. Interval Type 0~100
HSDPA Signal primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA Signal bearing primary path load threshold. Interval Type 0~100
HSDPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA Signal primary secondary path load ratio threshold. Interval Type 0~100
HSDPA streaming service downlink factor. Interval Type 0~100
HSDPA streaming primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA streaming bearing primary path load threshold.Interval Type 0~100
HSDPA streaming secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSDPA streaming primary secondary path load ratio threshold. Interval Type 0~100
HSDPA voice service downlink factor. Interval Type 0~100
HSDPA Voice primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSDPA Voice secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
This parameter specifies the number of the Fractional link corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa in E1 transmission mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing Fractional link is configured. Interval Type 0~31
32-bit unsigned integer.
1) DL_DCCH_SWITCH. When it is checked, SRNC
will include the IE "RB Id for handover message" in
the IE "SRNS Relocation Info", the target RNC
should choose the IE "DL DCCH message" and
include the DL DCCH message that should be
transmitted transparently to the UE by the source
RNC. In that case, the target RNC is integrity
protecting the message if applicable.
2) IUR_TRG_SWITCH. When it is checked,
relocation execution may trigger as an implementation
option from the Iur interface.
Bit Field Type DL_DCCH_SWITCH, IUR_TRG_SWITCH
Indicating whether to trigger hard handover cross the Iur interface between the RNC and the neighboring RNC. Enumeration Type OFF, ON
This parameter specifies the number of the IMA group corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa, the number ranges from 0 to 83. The bearing IMA group is configured. Interval Type 0~83
A timer to RNC wait for the response to active set update in soft handover procedure. Interval Type 1~10000
A timer to RNC wait for the response to the cell update confirm from UE in forward handover procedure. Interval Type 1~10000
Priority of coverage-based inter-frequency handover.
"0" means that the coverage-based inter-frequency
handover is not supported.
"1" means the highest priority.
"3" means the lowest priority.
Interval Type 0~3
A timer to RNC wait for paging response in forward handover procedure. Interval Type 1~10000
A timer to RNC wait for the response to physical channel reconfiguration in hard handover procedure. Interval Type 1~10000
A timer to RNC wait for relocation request in forward handover procedure. Interval Type 1~10000
This parameter specifies the NodeB host type in RNC
Node Redundancy function. If the parameter value is
SINGLEHOST, the physical NodeB is managed only
by one RNC. If the parameter value is PRIMHOST or
SECHOST, the physical NodeB can be managed by
two RNCs.
By default, the NodeB is managed by the host RNC.
When the host RNC fails, the physical NodeB is
managed by the secondary RNC.
Enumeration Type SINGLEHOST(SingleHost), PRIMHOST(PrimHost), SECHOST(SecHost)
HandOver switch.
1) HO_ALGO_HCS_SPEED_EST_SWITCH: When
the switch is on, the RNC evaluates the UE's moving
speed in the HCS and initiates fast intra-layer or slow
inter-layer handover.
2) HO_ALGO_LDR_ALLOW_SHO_SWITCH:
When the switch is on, the LDR inter-frequency
handover is allowed during soft handover.
3) HO_ALGO_MBMS_FLC_SWITCH: When the
switch is on, the UE requires that the redirection
strategy be used for frequency layer convergence.
4) HO_ALGO_OVERLAY_SWITCH: When the
switch is on, the associated receiving and mobility
algorithms of the overlay network are used. When the
switch is not on, the associated algorithms are not
used. Overlay network is an UTRAN network
covering present network, it supports HSPA, MBMS
and other new features. To satisfy new requirements
of operator and restrictions of present network,
overlay network realizes operation distribution and
load sharing between new network and present
network, also gives special handling for mobility
management of network verge.
5) HO_INTER_FREQ_HARD_HO_SWITCH: When
the switch is on, the RNC is allowed to initiate inter-
frequency measure control or the load-based inter-
frequency hard handover upon the handover decision
on inter-frequency load.
6) HO_INTER_FREQ_RPRT_2D2F_SWITCH:
When the switch is on, quality measurement of the
active set is allowed. After service setup is complete,
the RNC initiates signal quality measurement on all
the cells in the active set. If SIGNAL_HO_SWITCH
is ON, this action is performed after RRC setup is
Bit Field Type HO_ALGO_HCS_SPEED_EST_SWITCH, HO_ALGO_LDR_ALLOW_SHO_SWITCH, HO_ALGO_MBMS_FLC_SWITCH, HO_ALGO_OVERLAY_SWITCH, HO_INTER_FREQ_HARD_HO_SWITCH, HO_INTER_FREQ_RPRT_2D2F_SWITCH, HO_INTER_RAT_CS_OUT_SWITCH, HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_SWITCH, HO_INTER_RAT_PS_3G2G_RELOCATION_SWITCH, HO_INTER_RAT_PS_OUT_SWITCH, HO_INTER_RAT_RNC_SERVICE_HO_SWITCH, HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWITCH, HO_INTRA_FREQ_DETSET_RPRT_SWITCH, HO_INTRA_FREQ_HARD_HO_SWITCH, HO_INTRA_FREQ_RPRT_1J_SWITCH, HO_INTRA_FREQ_RPRT_6F6G_SWITCH, HO_INTRA_FREQ_SOFT_HO_SWITCH, HO_MC_MEAS_BEYOND_UE_CAP_SWITCH, HO_MC_NCELL_COMBINE_SWITCH, HO_MC_SIGNAL_IUR_INTRA_SWITCH, HO_MC_SIGNAL_SWITCH, HO_MC_SNA_RESTRICTION_SWITCH
Threshold of signal quality of the target frequency for
triggering inter-frequency(Ec/No) measurement.
If the mode is set to event mode, this parameter is
used to set measurement control on the event 2C.
If the mode is set to periodical mode, this parameter is
used to estimate the periodical reports and only if
quality of the target frequency is beyond the
threshold, the DRD procedure is triggered.
Interval Type -24~0
Threshold of signal quality of the target frequency for
triggering inter-frequency(RSCP) measurement.
If the mode is set to event mode, this parameter is
used to set measurement control on the event 2C.
If the mode is set to periodical mode, this parameter is
used to estimate the periodical reports and only if
quality of the target frequency is beyond the
threshold, the DRD procedure is triggered.
Interval Type -115~-25
A timer to RNC wait for the response to the TrCH reconfiguration or RB reconfiguration response from UE in hard handover procedure. Interval Type 1~10000
This parameter specifies the number of the optical port corresponding to the high-end port. Interval Type 0~3
DL activity factor of the HSUPA background service. Interval Type 0~100
Average throughput admission threshold of the HSDPA best effort traffic. If the sum of PBR of all the accessed HSDPA BE users is lower than the average throughput admission threshold of the HSDPA BE service multiplied by the sum of GBR of all the accessed HSDPA BE users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA BE services are not allowed. Otherwise, the QoS can be satisfied and new HSDPA BE services are allowed. If the value is too high, admission requirement of the HSDPA BE service is strict, which improves the service quality of the HSDPA BE service but also may lead to HSDPA capacity waste. If the value is too low, admission requirement of the HSDPA BE service is loose, which allows more BE services but QoS of the HSDPA BE service cannot be guaranteed. Interval Type 0~100
This parameter determines whether the compressed
mode (CM) is permitted for the UE when the HSDPA
services exist. If the parameter value is set to TRUE,
compressed mode is permitted on HSDPA, and
HSDPA services can be set up when the compressed
mode is activated. If the parameter value is set to
FALSE, channel switch on H2D (from HS-DSCH to
DCH) should be performed before compressed mode
is started, and no HSDPA services should exist when
compressed mode is activated.
This switch is used for the compatibility of the
HSDPA terminals existing in the network because
these HSDPA terminals do not support the activated
compressed mode on HSDPA services existence.
Enumeration Type FALSE(Forbidden), TRUE(Permit)
DL activity factor of the HSUPA conversational service. Interval Type 0~100
DL activity factor of the HSUPA interactive service. Interval Type 0~100
Length of smoothing filter window of HSDPA power requirement. Interval Type 1~32
Length of smoothing filter window of HSDPA bit rate. Interval Type 1~32
The minimum number of HSDPA service setup attempt Per Spu, the sum of HSDPA serive setup attempt need to be higher than this threshold to arise KPI alarm which type is HSDPA service successful setup ratio. Interval Type 0~65534
Successful HSDPA service setup ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
DL activity factor of the HSUPA streaming service. Interval Type 0~100
Average throughput admission threshold of the HSDPA streaming service. If the sum of PBR of all the accessed streaming users is lower than the average throughput admission threshold of the HSDPA streaming service multiplied by the sum of GBR of all the accessed streaming users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA streaming services are not allowed. Otherwise, the QoS can be satisfied and new HSDPA streaming services are allowed. If the value is too high, admission requirement of the HSDPA streaming service is strict, which improves the service quality of the HSDPA streaming service but also may lead to HSDPA capacity waste. If the value is too low, admission requirement of the HSDPA streaming service is loose, which allows more HSDPA streaming services but QoS of the HSDPA streaming service cannot be guaranteed. Interval Type 0~100
The total HSDPA throughput of all the operators cannot exceed that defined in the license file. Interval Type 0~3910000
The cell will shut down automatically only when the HSDPA user number is not greater than the threshold. Interval Type 0~5
This parameter specifies the first MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the second MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the third MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the fourth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the fifth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the sixth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the seventh MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the eighth MAC-d PDU size on the HS-DSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits. Interval Type 1~5000
This parameter specifies the number of sizes of HS-DSCH MAC-d PDUs. Currently, only VoIP services can be configured with multiple PDU sizes. Other services can have only one PDU size. Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8
This parameter specifies the number of the slot in which the high-end port carries the VPL/VCL cross connection. Interval Type 14~27
If the HspaEnhSwitch is enabled, it indicates that the
enhanced FDPCH function is supported in the cell.
Note: The actual use of this function is also restricted
by the license and the physical capability of the
NodeB.
Enumeration Type E_F_DPCH_OFF, E_F_DPCH_ON
According to the relevant protocols, MIMO, 64QAM, and HS-SCCH Less Operation cannot be configured concurrently to the same UE. This parameter specifies the configuration preference of MIMO, 64QAM, and HS-SCCH Less Operation when both the UE and the cell support these three features. Enumeration Type MIMO, 64QAM
If the corresponding item of this parameter is selected, it indicates that the HspaPlusSwitch is enabled. Otherwise, it indicates that the HspaPlusSwitch is not enabled. Note that the actual use of this function is restricted by the license and the physical capability of the NodeB. The EFACH/MIMO switch specifies whether this EFACH/MIMO service is supported in the cell. The setting of the EFACH/MIMO switch does not affect the EFACH in the cell and the establishment of the MIMO cell. Bit Field Type 64QAM(Cell 64QAM Function Switch), MIMO(Cell MIMO Function Switch), E_FACH(Cell E_FACH Function Switch), DTX_DRX(Cell DTX_DRX Function Switch), HS_SCCH_LESS_OPERATION(Cell HS_SCCH LESS OPERATION Function Switch), L2ENHANCED(Cell L2ENHANCED Function Switch)
This parameter specifies the difference between the total HSPA power and the maximum transmission power of a cell. The maximum value of HSPA dynamical power can be adjusted to the total amount of HSPA power. If the parameter value is set too low, the total HSPA power will be too low, thus impacting the throughput of HSDPA subscribers at the border of a cell. For details about this parameter, refer to 3GPP TS 25.308. Interval Type -500~0
HSPA serving cell change is usually triggered by event 1D. To avoid frequent serving cell change which may affect the system performance, a protection timer TimerHSPA is needed. This timer shall be started upon HSPA handover completed, i.e. the serving HSDSCH cell changed or the EDCH serving cell changed. And no more 1D-triggered serving cell change shall be performed until the timer expires. However, this timer shall not restrict HSPA serving cell change to another cell in the active set if current serving cell is to be removed from the active set. The value 0 means this timer shall not be started and serving cell change be initiated immediately. Interval Type 0~1024
This parameter specifies whether index 1 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. Enumeration Type FALSE, TRUE
This parameter specifies whether index 2 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. Enumeration Type FALSE, TRUE
This parameter specifies whether index 3 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. Enumeration Type FALSE, TRUE
This parameter specifies whether index 4 of the size of a transport block transmitted in HS-SCCH Less Operation mode supports HS-SCCH type 2. For details, refer to the 3GPP TS 25.433 protocol. Enumeration Type FALSE, TRUE
The parameter specifies the number of HS-DPSCH codes. This parameter is valid only when "Allocate Code Mode" is set to "Manual". If the parameter value is set too low, the HSDPA code resources are restricted and the HSDPA performance is affect. If the parameter value is set too high, the HSDPA code resources are wasted, thus increasing the admission rejection rate of R99 services. For detailed information about this parameter, refer to 3GPP TS 25.308. Interval Type 1~15
The parameter determines the maximum number of HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to "Automatic". The number of codes used by the HS-PDSCH is dynamically set between "Code Max Number for HS-PDSCH" and "Code Min Number for HS-PDSCH", based on whether the code tree is idle or busy. When the code resource used by the non-HSPA services is little, the HS-PDSCH uses the rest idle codes as much as possible, and the maximum number of idle codes (SF=16 continuous codes) is equal to the value of "Code Max Number for HS-PDSCH". Interval Type 1~15
The parameter specifies the minimum number of the HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to Automatic. The number of codes used by the HS-PDSCH is dynamically set between "Code Max Number for HS-PDSCH" and "Code Min Number for HS-PDSCH", based on the idle state of the code tree. When the non-H services need more code resources, the non-H service will gradually occupy the codes used by the HS-PDSCH. The number of codes (SF=16 continuous codes) the HS-DPSCH reserved is not less than the value of Code Min Number for HS-PDSCH. Interval Type 1~15
Measure Power Offset (MPO) Constant is used to compute Measure Power Offset, as shown in Measure Power Offset = Max(-6, Min(13,CellMaxPower - PcpichPower - Measure Power OffsetConstant)). If the parameter value is unreasonable, the CQI in some scenarios will exceed the range of 0 to 30. As a result, the NodeB MAC-hs cannot schedule the subscriber in the corresponding time or cannot schedule multiple subscribers with the difference of channel conditions. For details of the IE "Measure Power Offset", refer to 3GPP TS 25.308. Enumeration Type Minus3.0DB(-3.0dB), Minus2.5DB(-2.5dB), Minus2.0DB(-2.0dB), Minus1.5DB(-1.5dB), Minus1.0DB(-1.0dB), Minus0.5DB(-0.5dB), 0.0DB(0.0dB), 0.5DB(0.5dB), 1.0DB(1.0dB), 1.5DB(1.5dB), 2.0DB(2.0dB), 2.5DB(2.5dB), 3.0DB(3.0dB), 3.5DB(3.5dB), 4.0DB(4.0dB), 4.5DB(4.5dB), 5.0DB(5.0dB), 5.5DB(5.5dB), 6.0DB(6.0dB), 6.5DB(6.5dB), 7.0DB(7.0dB), 7.5DB(7.5dB), 8.0DB(8.0dB), 8.5DB(8.5dB), 9.0DB(9.0dB), 9.5DB(9.5dB), 10.0DB(10.0dB), 10.5DB(10.5dB), 11.0DB(11.0dB), 11.5DB(11.5dB), 12.0DB(12.0dB), 12.5DB(12.5dB), 13.0DB(13.0dB), 13.5DB(13.5dB), 14.0DB(14.0dB), 14.5DB(14.5dB), 15.0DB(15.0dB), 15.5DB(15.5dB), 16.0DB(16.0dB), 16.5DB(16.5dB), 17.0DB(17.0dB), 17.5DB(17.5dB), 18.0DB(18.0dB), 18.5DB(18.5dB), 19.0DB(19.0dB)
This parameter indicates the TX diversity preferably selected by HSPDSCH. Enumeration Type None, STTD, CP1
This parameter specifies the number of the subrack whose high-end port carries the VPL/VCL cross connection. Interval Type 0~5
This parameter decides the maximum number of subscribers that the NodeB can schedule in a TTI period. In the scenarios like outdoor macro cells with power restricted, it is less likely to schedule multiple subscribers simultaneously, so two HS-SCCHs are configured. In the scenarios like indoor pico with code restricted, it is more likely to schedule multiple subscribers simultaneously, so four HS-SCCHs are configured. If excessive HS-SCCHs are configured, the code resource is wasted. If insufficient HS-SCCHs are configured, the HS-PDSCH code resource or power resource is wasted. Both affect the cell throughput rate. For detailed information of this parameter, refer to 3GPP TS 25.308. Interval Type 1~15
This parameter specifies the time interval of sending HSUPA scheduling information for TTI 10ms when the user has Schedule Grant. Enumeration Type D10, D20, D50, D100, D200, D500, D1000
This parameter specifies the time interval of sending HSUPA scheduling information alone for TTI 10ms when the user has no Schedule Grant and its buffer length is greater than zero. Enumeration Type D10, D20, D50, D100, D200, D500, D1000
This parameter specifies the time interval of sending HSUPA scheduling information for TTI 2ms when the user has Schedule Grant. Enumeration Type D2, D10, D20, D50, D100, D200, D500, D1000
This parameter specifies the time interval of sending HSUPA scheduling information alone for TTI 2ms when the user has no Schedule Grant and its buffer length is greater than zero. Enumeration Type D2, D10, D20, D50, D100, D200, D500, D1000
UL activity factor of the HSUPA background service. Interval Type 0~100
Threshold for rate decrease of HSUPA BE service soft handover. If the current rate is beyond the threshold, the rate over the EDCH is lowered to the threshold before the soft handover, thus ensuring the success of the soft handover of the HSUPA BE service. The rate increase of HSUPA in SHO status is not limitted by this parameter. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384, D608, D1450, D2048, D2890, D5760
When the dynamic CE algorithm on NodeB is not applied, this parameter indicates whether the CE consumption of HSUPA user is based on the GBR or MBR. When the dynamic CE algorithm on NodeB is applied, the CE consumption of HSUPA user is based on the GBR. If the CE consumption of HSUPA user is based on the GBR, the CE LDR will not select HSUPA users to do data rate reductio. If the CE consumption of HSUPA user is based on the MBR, the CE LDR will select HSUPA users to do data rate reduction on condition that the HSUPA DCCC switch is ON. Enumeration Type MBR, GBR
This parameter determines whether the compressed
mode (CM) is permitted for the UE when HSUPA
services exist. If the parameter value is set to Permit,
compressed mode is permitted on HSUPA, and
HSUPA services can be set up when the compressed
mode activated. If the parameter value is set to
Limited, channel switch on E2D (from E-DCH to
DCH) should be performed before the compressed
mode is started and no HSUPA services should exist
when the compressed mode is activated. If the
parameter value is set to BasedonUECap, the RNC
determines whether to activate the compressed mode
on E-DCH based on the UE capability, and whether to
establish an E-DCH when the compressed mode is
activated.
This switch is used for the compatibility of the
HSUPA terminals existing in the network because
these HSUPA terminals do not support the
compressed mode activated on the E-DCH.
Enumeration Type Limited, Permit, BasedOnUECap(Based On UE Capability)
UL activity factor of the HSUPA conversational service. Interval Type 0~100
Strategy of the UE for rate adjustment over the EDCH. RATE_UP_AND_DOWN_ON_EDCH indicates that the rate over the EDCH can be raised or lowered. RATE_UP_ONLY_ON_EDCH indicates that the rate over the EDCH can only be raised, which means that the UE can switch to the FACH state at any rate. Enumeration Type RATE_UP_AND_DOWN_ON_EDCH, RATE_UP_ONLY_ON_EDCH
Threshold of all the HSUPA user PBR whose schedule priority is the same as that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestion. Interval Type 0~100
Threshold of all the HSUPA user PBR whose schedule priority is higher than that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestionRecommended. Interval Type 0~100
HSUPA BE traffic Initial bit rate. When DCCC algorithm switch and HSUPA DCCC algorithm switch are enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial bit rate. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880, D5740
UL activity factor of the HSUPA interactive service. Interval Type 0~100
Threshold of all the HSUPA user PBR whose schedule priority is lower than that of users to be admitted. If this value is too high, the possibility of rejecting HSUPA schedule services increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and results in overload and system congestion. Interval Type 0~100
Length of smoothing filter window of HSUPA bit rate. Interval Type 1~32
The minimum number of HSUPA serive setup attempt Per Spu, the sum of HSUPA service setup attempt need to be higher than this threshold to arise KPI alarm which type is HSUPA service successful setup ratio. Interval Type 0~65534
Successful HSUPA service setup ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
UL activity factor of the HSUPA streaming service. Interval Type 0~100
The total HSUPA throughput of all the operators cannot exceed that defined in the license file. Interval Type 0~3910000
HSUPA auto retransmit load release threshold. Interval Type 0~100
HSUPA auto retransmit load trigger threshold. Interval Type 0~100
The cell will shut down automatically only when the HSUPA user number is not greater than the threshold. Interval Type 0~5
HSUPA background primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA background bearing primary path load threshold. Interval Type 0~100
HSUPA background secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA background primary secondary path load ratio threshold. Interval Type 0~100
HSUPA background service uplink factor. Interval Type 0~100
HSUPA conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA conversational bearing primary path load threshold. Interval Type 0~100
HSUPA conversational secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA conversational primary secondary path load ratio threshold. Interval Type 0~100
HSUPA conversational service uplink factor. Interval Type 0~100
HSUPA high priority interactive bearing primary path load threshold. Interval Type 0~100
HSUPA high priority interactive primary secondary path load ratio threshold. Interval Type 0~100
HSUPA interactive service uplink factor. Interval Type 0~100
HSUPA high PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA high PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA low PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA low PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA middle PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA middle PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA low priority interactive bearing primary path load threshold. Interval Type 0~100
HSUPA low priority interactive primary secondary path load ratio threshold. Interval Type 0~100
This parameter specifies whether the alarm reporting for humidity is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the upper threshold for humidity alarm. String Type -
This parameter specifies the lower threshold for humidity alarm. String Type -
HSUPA middle priority interactive bearing primary path load threshold. Interval Type 0~100
HSUPA middle priority interactive primary secondary path load ratio threshold. Interval Type 0~100
This parameter specifies the number of the UNI link corresponding to the high-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa in E1 transmission mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing UNI link is configured. Interval Type 0~167
HSUPA Signal primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA IMS Signal bearing primary path load threshold. Interval Type 0~100
HSUPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA IMS Signal primary secondary path load ratio threshold. Interval Type 0~100
HSUPA IMS uplink factor. Interval Type 0~100
HSUPA Signal primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA Signal bearing primary path load threshold. Interval Type 0~100
HSUPA Signal secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA Signal primary secondary path load ratio threshold. Interval Type 0~100
HSUPA SRB uplink factor. Interval Type 0~100
HSUPA streaming primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA streaming bearing primary path load threshold.Interval Type 0~100
HSUPA streaming secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA streaming primary secondary path load ratio threshold. Interval Type 0~100
HSUPA streaming service uplink factor. Interval Type 0~100
HSUPA Voice primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
HSUPA Voice secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
HSUPA voice service uplink factor. Interval Type 0~100
This parameter specifies the VCI of the high-end VCL. Interval Type 32~65535
This parameter specifies the VPI of the high-end VPL/VCL. If the VPL is cross connected, VPI cannot be 0. Interval Type 0~255
This parameter specifies the hysteresis value for
event 1A. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the less possibility of ping-pong effect or wrong
decision. But the event might not be triggered in time.
For the definition, refer to 3GPP TS 25.331.
The value of this parameter is ranged from 2 dB to 5
dB. Event 1A is a key event that adds a cell to the
active set. To ensure timely handover, the hysteresis
of event 1A should be set a little smaller than those of
events 1B, 1F, 1C, and 1D. But the difference should
not be too large, otherwise the soft handover ratio can
be affected. In addition, this parameter is related to
filter coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the
hysteresis means decrease of the SHO area. But for
the UE that leaves the SHO area, that means enlarging
of the SHO area. If the number of UEs entering the
area and the number of UEs leaving the area are
equal, the real SHO ratio will not be affected. The
larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the varying of
the signal in response to the handover algorithm
becomes slower.
Interval Type 0~15
This parameter specifies the hysteresis value for
event 1B. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the less possibility of ping-pong effect or wrong
decision. But the event might not be triggered in time.
For the definition, refer to 3GPP TS 25.331.
The value of this parameter is ranged from 2 dB to 5
dB. In addition, this parameter is related to filter
coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the
hysteresis means decrease of the SHO area. But for
the UE that leaves the SHO area, that means enlarging
of the SHO area. If the number of UEs entering the
area and the number of UEs leaving the area are
equal, the real SHO ratio will not be affected. The
larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the varying of
the signal in response to the handover algorithm
becomes slower.
Interval Type 0~15
This parameter specifies the hysteresis value for
event 1C. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the less possibility of ping-pong effect or wrong
decision. But the event might not be triggered in time.
For the definition, refer to 3GPP TS 25.331.
The value of this parameter is ranged from 2 dB to 5
dB. In addition, this parameter is related to filter
coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the
hysteresis means decrease of the SHO area. But for
the UE that leaves the SHO area, that means enlarging
of the SHO area. If the number of UEs entering the
area and the number of UEs leaving the area are
equal, the real SHO ratio will not be affected. The
larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the varying of
the signal in response to the handover algorithm
becomes slower.
Interval Type 0~15
This parameter specifies the hysteresis value for
event 1D. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the less possibility of ping-pong effect or wrong
decision. But the event might not be triggered in time.
For the definition, refer to 3GPP TS 25.331.
The value of this parameter is ranged from 2 dB to 5
dB. In addition, this parameter is related to filter
coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the
hysteresis means decrease of the SHO area. But for
the UE that leaves the SHO area, that means enlarging
of the SHO area. If the number of UEs entering the
area and the number of UEs leaving the area are
equal, the real SHO ratio will not be affected. The
larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the varying of
the signal in response to the handover algorithm
becomes slower.
Interval Type 0~15
This parameter specifies the hysteresis value for
event 1F. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the less possibility of ping-pong effect or wrong
decision. But the event might not be triggered in time.
For the definition, refer to 3GPP TS 25.331.
The value of this parameter is ranged from 2 dB to 5
dB. In addition, this parameter is related to filter
coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the
hysteresis means decrease of the SHO area. But for
the UE that leaves the SHO area, that means enlarging
of the SHO area. If the number of UEs entering the
area and the number of UEs leaving the area are
equal, the real SHO ratio will not be affected. The
larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the varying of
the signal in response to the handover algorithm
becomes slower.
Interval Type 0~15
This parameter specifies the hysteresis value for
event 1J. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the less possibility of ping-pong effect or wrong
decision. But the event might not be triggered in time.
For the definition, refer to 3GPP TS 25.331.
The value of this parameter is ranged from 2 dB to 5
dB. In addition, this parameter is related to filter
coefficient and trigger delay.
As for the impact on network performance:
For the UE that enters the SHO area, increase of the
hysteresis means decrease of the SHO area. But for
the UE that leaves the SHO area, that means enlarging
of the SHO area. If the number of UEs entering the
area and the number of UEs leaving the area are
equal, the real SHO ratio will not be affected. The
larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the varying of
the signal in response to the handover algorithm
becomes slower.
Interval Type 0~15
Hysteresis value for the event 2B.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
stronger the capability of resisting signal fluctuation.
Thus, the ping-pong effect can be resisted, but the
speed of the handover algorithm to respond to signal
change becomes lower, and therefore event 2B might
not be triggered in time.
Interval Type 0~29
Hysteresis value for the event 2C.
The value of this parameter correlates with slow
fading.
The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be resisted, but the speed of the
handover algorithm to respond to signal change
becomes lower, and therefore event 2B might not be
triggered in time.
Interval Type 0~29
Hysteresis value for the event 2D.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
smaller probability of ping-pong effect or wrong
decision, but event 2D might not be triggered in time.
In periodical report mode, this parameter is used to
resist the ping-pong effect of event 2D (the quality of
the currently used frequency is lower than the
threshold) and event 2F (the estimated quality of the
currently used frequency is higher than the threshold).
Event 2D is used to enable the compressed mode and
event 2F is used to disable the compressed mode.
Therefore, Hystfor2D can be increased on the basis of
recommended value and inter-frequency handover
ping-pong effect statistics. Hystfor2F can also be
increased to reduce frequent enabling or disabling of
compressed mode and to avoid unnecessary updates
of the active set.
To set the values of the parameters, you should
consider the following factors: radio environment
(with slow fading characteristic), actual handover
distance, and moving speed of the UE. The value
range of this parameter can be 2 dB to 5 dB. In
addition, this parameter is related to filter coefficient
and trigger delay.
Interval Type 0~29
Hysteresis value for the event 2F.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
smaller probability of ping-pong effect or wrong
decision, but event 2F might not be triggered in time.
In periodical report mode, this parameter is used to
resist the ping-pong effect of event 2D (the quality of
the currently used frequency is lower than the
threshold) and event 2F (the estimated quality of the
currently used frequency is higher than the threshold).
Event 2D is used to enable the compressed mode and
event 2F is used to disable the compressed mode.
Therefore, Hystfor2D can be increased on the basis of
recommended value and inter-frequency handover
ping-pong effect statistics. Hystfor2F can also be
increased to reduce frequent enabling or disabling of
compressed mode and to avoid unnecessary updates
of the active set.
To set the values of the parameters, you should
consider the following factors: radio environment
(with slow fading characteristic), actual handover
distance, and moving speed of the UE. The value
range of this parameter can be 2 dB to 5 dB. In
addition, this parameter is related to filter coefficient
and trigger delay.
Interval Type 0~29
Hysteresis value for the event 3A.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
stronger the capability of resisting signal fluctuation.
Thus, the ping-pong effect can be avoided, but the
speed of the handover algorithm to respond to signal
change becomes lower. If the inter-RAT handover
hysteresis is set to an excessively high value, the
GSM cell to which the UE is handed over must be of
good quality. Therefore, the conditions for triggering
the inter-RAT handover decision are hard to be
satisfied, and the call drop rate increases.
The emulation result shows that in a cell where the
average moving speed of UEs is high, for example a
cell that covers highways, HystforInterRAT can be set
to 1.5 dB, because in the cell the terrain is flat and
there are few barriers , which causes small shadow
fading variation. In a cell where the average moving
speed of UEs is low, there are usually many tall
buildings, so the shadow fading variation is
comparatively big, and HystforInterRAT can be set to
3.0 dB.
Interval Type 0~15
Hysteresis value for the event 3C.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
stronger the capability of resisting signal fluctuation.
Thus, the ping-pong effect can be avoided, but the
speed of the handover algorithm to respond to signal
change becomes lower. If the inter-RAT handover
hysteresis is set to an excessively high value, the
GSM cell to which the UE hands over must be of
good quality. Therefore, the conditions for triggering
the inter-RAT handover decision are hard to be
satisfied, and the call drop rate increases.
The emulation result shows that in a cell where the
average moving speed of UEs is high, for example a
cell that covers highways, HystforInterRAT can be set
to 1.5 dB, because in the cell the terrain is flat and
there are few barriers , which causes a small shadow
fading variation. In a cell where the average moving
speed of UEs is low, there are usually many tall
buildings, so the shadow fading variation is
comparatively big, and HystforInterRAT can be set to
3.0 dB.
Interval Type 0~15
Hysteresis value for inter-RAT measurement
periodical reports.
This parameter aims to prevent the mis-decision
caused by unexpected jitters of signals during inter-
RAT handover decisions. The HystforInterRAT and
the inter-RAT handover decision threshold determine
whether to trigger inter-RAT handovers.
The larger the value of this parameter, the stronger the
capability of resisting signal fluctuation. Thus, the
ping-pong effect can be avoided, but the speed of the
handover algorithm to respond to signal change
becomes lower. If the inter-RAT handover hysteresis
is set to an excessively high value, the GSM cell to
which the UE is handed over must be of good quality.
Therefore, the conditions for triggering the inter-RAT
handover decision are hard to be satisfied, and the call
drop rate increases.
The emulation result shows that in a cell where the
average moving speed of UEs is high, for example a
cell that covers highways, HystforInterRAT can be set
to 1.5 dB, because in the cell the terrain is flat and
there are few barriers , which causes small shadow
fading variation. In a cell where the average moving
speed of UEs is low, there are usually many tall
buildings, so the shadow fading variation is
comparatively big, and HystforInterRAT can be set to
3.0 dB.
Interval Type 0~15
Hysteresis for inter-frequency hard handover in
periodical report mode.
This parameter is used to estimate the inter-frequency
handover at the RNC. The larger the value of this
parameter, the stronger the capability of resisting
signal fluctuation. Thus, the ping-pong effect can be
resisted, but the speed of the handover algorithm to
respond to signal change becomes lower, and
therefore event 2B might not be triggered in time.
Interval Type 0~29
After a connection is established successfully, the timer is started. If the timer does not receive the detection message when the timer expires, the connection will be released. Interval Type 180~1260
After a connection is established successfully, the timer is started. When the timer expires, a detection message will be sent to the peer end. Interval Type 60~600
The ICMP Packet length include the IP header length. Interval Type 44~1024
This parameter specifies the ID of the scheduled task to be started. Interval Type 1~30,100~32767
Indicating whether the UE in idle mode is allowed to access the cell. When the cell status is BARRED, it indicates that the UEs in idle mode are barred to select/reselect the cell even in the case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE in idle mode is allowed to reselect another intra-frequency cell. This parameter is valid when [Cell barred indicator for SIB3] is BARRED. If this parameter is ALLOWED, the UE in idle mode can select another intra-frequency cell when the cell selection/reselection condition is satisfied. If this parameter is NOT_ALLOWED, the UE in idle mod cannot select another intra-frequency cell. The indicator can be neglected in case of emergency calls. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type ALLOWED, NOT_ALLOWED
The hysteresis value of the serving FDD cells in idle
mode in case the quality measurement for cell
selection and reselection is set to CPICH RSCP. It is
related to the slow fading feature of the area where the
cell is located. The greater the slow fading variance is,
the greater this parameter.
According to the R regulation, the current serving cell
involves in cell selection after the measurement value
is added with the hysteresis value. The measurement
hysteresis aims to prevent the ping-pong effect of the
cell reselection, which is caused by the slow fading
when the UE is on the edge of the cell. The ping-pong
effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates
(CELL_FACH, CELL_PCH), and thus increase the
load of network signaling and the consumption of UE
batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading
as well as ensuring timely cell updates of the UE.
According to the CPICH RSCP emulation report of
inter-frequency hard handovers, the measurement
hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm
by default when the slow fading variance is 8 dB and
the relative distance is 20 m. In the cells where the
slow fading variance is low and the average moving
speed of UEs is high, for example the suburbs and
countryside, reduce the measurement hysteresis to
guarantee timely location updates of UEs. The higher
the measurement hysteresis is, the less likely it is for
various types of cell reselections to occur, and the
better the slow fading resistance capability is, but the
slower the system reacts to the environment changes.
For detailed information of this parameter, refer to
3GPP TS 25.304.
Interval Type 0~20
The hysteresis value of the serving FDD cells in idle
mode in case the quality measurement for cell
selection and reselection is set to CPICH Ec/No. It is
related to the slow fading feature of the area where the
cell is located. The greater the slow fading variance is,
the greater this parameter. It is optional. If it is not
configured, [Hysteresis 1] will be adopted as the
value. This parameter is not configured when its value
is 255.
According to the R regulation, the current serving cell
involves in cell selection after the measurement value
is added with the hysteresis value. The measurement
hysteresis aims to prevent the ping-pong effect of the
cell reselection, which is caused by the slow fading
when the UE is on the edge of the cell. The ping-pong
effect may trigger frequent location updates (idle
mode), URA updates (URA_PCH), or cell updates
(CELL_FACH, CELL_PCH), and thus increase the
load of network signaling and the consumption of UE
batteries. Set a proper measurement hysteresis to
reduce as much as possible effect of the slow fading
as well as ensuring timely cell updates of the UE.
According to the CPICH RSCP emulation report of
inter-frequency hard handovers, the measurement
hysteresis ranges 4 dBm to 5 dBm and is set to 4 dBm
by default when the slow fading variance is 8 dB and
the relative distance is 20 m. In the cells where the
slow fading variance is low and the average moving
speed of UEs is high, for example the suburbs and
countryside, reduce the measurement hysteresis to
guarantee timely location updates of UEs. The higher
the measurement hysteresis is, the less likely it is for
various types of cell reselections to occur, and the
better the slow fading resistance capability is, but the
Interval Type 0~20,255
Offset of cell CPICH RSCP measurement value in
cell selection or reselection when the UE is in idle
mode.
Offset of neighboring cell CPICH measurement value.
This parameter is used for RSSI measurement. The
offset is subtracted from the neighboring cell
measurement value before cell reselection.
This parameter defines the offset of cell CPICH
RSCP measurement value in cell selection or
reselection when the UE is in idle mode.
In cell reselection algorithm, this parameter is used for
moving the border of a cell. This parameter can be
configured by the network planner according to
reality.
NOTE:
In FDD mode, this parameter is valid only when
SIB11 Indicator is set as TRUE.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value the parameter, the higher the probability of
doing so.
Interval Type -50~50
Offset of cell CPICH Ec/No measurement value in
cell selection or reselection when the UE is in idle
mode.
Offset of neighboring cell CPICH measurement value
This parameter is used for Ec/No measurement. The
offset is subtracted from the neighboring cell
measurement value before cell reselection.
In cell reselection algorithm, this parameter is used for
moving the border of a cell. This parameter can be
configured by the network planner according to
reality.
NOTE:
In FDD mode this parameter is valid only when SIB11
Indicator is set as TRUE.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value the parameter, the higher the probability of
doing so.
Interval Type -50~50
Threshold for inter-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the inter-frequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the UE may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections to be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication between Interval Type -16~10,127
Threshold for intra-frequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intra-frequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the UE may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections to be started, and the UE may not timely reside in the cells with good quality, affecting the quality of communication bet Interval Type -16~10,127
This parameter is valid when [Cell barred indicator for SIB3] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set to BARRED. The greater the value, the lower the frequency of the UE trying to read the cell bar status. The smaller the value, the higher the frequency of the UE trying to read the cell bar status. For detailed information, refer to 3GPP TS 25.331. Enumeration Type D10, D20, D40, D80, D160, D320, D640, D1280
Interval for sending the POLL message when no data is transmitted. Interval Type 100~30000
After the coverage based handover succeeds, to avoid the handover of the UE to another frequency due to the following factors: overload, speed estimation, MBMS channel reselection, and QoS, frequent handovers occur. The RNC will start the inter-frequency non-coverage based anti-ping-pong timer and prohibit the handover or measurement caused by the previous factors before the timeout of the timer. The larger this parameter, the better effect the anti-frequent handover. This, however, will affect the management policy of the cell or the quality of service felt by the users; the smaller this parameter, the more frequent the inter-frequency handover. Interval Type 0~120
CN flow control timer (short). The OVERLOAD message received repeatedly in this period will be discarded. Interval Type 5000~30000
This parameter specifies the number of an IMA group. Interval Type 0~83
This parameter specifies the IMA ID. Interval Type 0~255
This parameter specifies the number of an IMA link. Interval Type 0~167
This parameter specifies the IMA protocol version. Enumeration Type V1.0, V1.1
This parameter specifies whether it is allowed to use
the initial rate of IMS signaling set on the LMT, that
is, the value of [Ims initial rate].
- ON: If the IMS signaling is carried on the DCH, the
maximum rate of IMS signaling takes the value of
[Ims initial rate].
- OFF: The maximum rate of IMS signaling does not
take the value of [Ims initial rate].
Enumeration Type OFF, ON
This parameter specifies the channel type of IMS
signaling.
- DCH: Both uplink and downlink are preferably
carried on DCH.
- HSDPA: Uplink is preferably carried on DCH, and
downlink is preferably carried on HS-DSCH.
- HSPA: Uplink is preferably carried on E-DCH, and
downlink is preferably carried on HS-DSCH.
Enumeration Type DCH(UL_DCH,DL_DCH), HSDPA(UL_DCH,DL_HSDSCH), HSPA(UL_EDCH,DL_HSDSCH)
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends IMS data on the Iub interface. Interval Type 1~1000
UE IMSI ID. String Type -
The maximum of one IMSI range. String Type -
The minimum of one IMSI range. String Type -
This parameter specifies the initial access rate of IMS
signaling. When the [Ims Bear enhanced switch] is
ON:
- If the IMS signaling is carried on the DCH in the
downlink, the initial rate takes the larger value
between this parameter and the CN-assigned bit rate.
- If the IMS signaling is carried on the HSPA, the
MBR takes the larger value between this parameter
and the CN-assigned bit rate.
Enumeration Type D32, D64
Maximum of IMSI route parameter in IDNNS. Interval Type 0~999
Minimum of IMSI route parameter in IDNNS. Interval Type 0~999
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends IMS data on the Iub interface. Interval Type 1~2000
If data is not transmitted on the EDCH for several consecutive EDCH TTIs, the interval at which two consecutive patterns are transmitted on the UL DPCCH should be changed from DtxCycle1 to DtxCycle2. Here, the value of DtxCycle2 is an integer multiple of the value of DtxCycle1. This parameter specifies the number of EDCH TTIs. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D1, D4, D8, D16, D32, D64, D128, D256
This parameter specifies the number of consecutive subframes that the UE should monitor on each HS-SCCH of the HS-SCCH set immediately after the data reception on the HS-SCCH or HS-PDSCH. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D0, D1, D2, D4, D8, D16, D32, D64, D128, D256, D512
This parameter specifies the number of subframes that the UE should monitor on the E-AGCH of the serving radio link and on the E-RGCH of each radio link after the data transmission on the EDCH. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D0, D1, D2, D4, D8, D16, D32, D64, D128, D256
This parameter specifies whether the alarm reporting for infrared sensor is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the inhibit type (Physical inhibit, Logic inhibit). Enumeration Type LOGIC(Logic inhibit), PHYSICAL(Physical inhibit)
Maximum allowed no-credit time length. Interval Type 1200~2000
The integrity protection algorithm supported by RNC. Only UIA1 is supported currently. Bit Field Type UIA1
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends interactive service data on the Iub interface. Interval Type 1~1000
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends interactive service data on the Iub interface. Interval Type 1~2000
MBDR switch. Bit Field Type CSAMR_INTERFREQ(CS AMR inter-frequency switch), CSNONAMR_INTERFREQ(CS non AMR inter-frequency switch), PSR99_INTERFREQ(PSR99 inter-frequency switch), PSHSPA_INTERFREQ(PSHSPA inter-frequency switch)
Threshold of signal quality of the target frequency for
triggering inter-frequency measurement.
This parameter is used to set measurement control on
the event 2C.
The event 2C is triggered when the signal quality of
the target frequency is above this threshold. Interval Type -24~0
Threshold to trigger inter-frequency measurement
with measurement quantity of Ec/No for CS domain
services.
The inter-frequency measurement start Ec/No
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
moving speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to activate
compressed mode and start inter-frequency
measurement, if the UE reports event 2D when the
measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -17 dB; for
the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for
the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -14 dB.
Through emulation, the call drop rate remains low for
the UEs moving at the speed of 120 km/h when this
parameter is set to -14 dB.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -24~0
Threshold to trigger inter-frequency measurement
with measurement quantity of RSCP for CS domain
services.
The inter-frequency measurement start RSCP
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the moving speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to activate
compressed mode and start inter-frequency
measurement, if the UE reports event 2D when the
measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -100 dBm;
for the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -97 dBm;
for the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -93 dBm.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -95 dBm.
Through emulation, the call drop rate remains low for
the UEs moving at the speed of 120 km/h when this
parameter is set to -95 dBm.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -115~-25
Threshold to stop inter-frequency measurement with
measurement quantity of Ec/No for CS domain
services.
The inter-frequency measurement stop Ec/No
threshold (namely, compressed mode stop threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
moving speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it means that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -24~0
Threshold to stop inter-frequency measurement with
measurement quantity of RSCP for CS domain
services.
The inter-frequency measurement stop RSCP
threshold (namely, compressed mode stop threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the moving speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it means that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -115~-25
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this parameter is, the earlier downlink MBDR algorithm of inter frequency goes into overload state. When cell load is higher than the product of downlink cell admission control threshold and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter frequency is in overload state. Interval Type 0~100
L3 filtering coefficient for the inter-frequency
measurement.
The physical meaning of this parameter is the same as
the measurement model and intra-frequency
measurement. The difference is that the report period
for the inter-frequency measurement is 480 ms,
whereas the report period for the intra-frequency
measurement is 200 ms. In practice, it can be adjusted
according to traffic performance measurement.
The larger the value of this parameter, the stronger the
smoothing effect and the higher the anti-fast-fading
capability, but the lower the signal change tracing
capability. If the value of this parameter is set too
small, unnecessary hard handover or frequently
changed handover may occur.
Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
According to the cell inter-frequency hierarchical
selection, the RNC chooses the proper inter-frequency
measurement control parameters to implement
coverage, speed estimation, and traffic absorption.
INTER_FREQ_COV: coverage-based inter-frequency
handover.
INTER_FREQ_COV_NCOV: coverage-based inter-
frequency handover, and non-coverage-based inter-
frequency handover triggered by speed estimation.
INTER_FREQ_TA: traffic-based inter-frequency
handover, which includes the function similar to
coverage-based inter-frequency handover.
Enumeration Type INTER_FREQ_COV(Coverage-based inter-frequency handover), INTER_FREQ_COV_NCOV(Coverage-based and non-coverage-based inter-RAT handover), INTER_FREQ_TA(Traffic-based inter-frequency handover)
Threshold to trigger inter-frequency measurement
with measurement quantity of Ec/No for PS domain
HSPA services.
The inter-frequency measurement start Ec/No
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
moving speed of the UE and the cell radius.
For HSPA services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to activate
the compressed mode and start inter-frequency
measurement, if the UE reports event 2D when the
measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -17 dB; for
the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for
the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -14 dB.
Through emulation, the call drop rate remains low for
the UEs moving at the speed of 120 km/h when this
parameter is set to -14 dB.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -24~0
Threshold to trigger inter-frequency measurement
with measurement quantity of RSCP for PS domain
HSPA services.
The inter-frequency measurement start RSCP
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the moving speed of the UE and the cell radius.
For HSPA services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to activate
the compressed mode and start inter-frequency
measurement, if the UE reports event 2D when the
measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -100 dBm;
for the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -97 dBm;
for the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -93 dBm.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -95 dBm.
Through emulation, the call drop rate remains low for
the UEs moving at the speed of 120 km/h when this
parameter is set to -95 dBm.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -115~-25
Threshold to stop inter-frequency measurement with
measurement quantity of Ec/No for PS domain HSPA
services.
The inter-frequency measurement stop Ec/No
threshold (namely, compressed mode stop threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
moving speed of the UE and the cell radius.
For HSPA services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it means that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -24~0
Threshold to stop inter-frequency measurement with
measurement quantity of RSCP for PS domain HSPA
services.
The inter-frequency measurement stop RSCP
threshold (namely, compressed mode stop threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the moving speed of the UE and the cell radius.
For HSPA services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it means that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -115~-25
Indicating whether the inter-frequency/RAT measurement control information should be delivered through the system information. When a UE in the CELL_FACH state receives the FACH measurement occasion info message and in the message the inter-frequency FDD measurement indicator is set to TRUE, the UE performs inter-frequency measurement and cell reselection assessment according to the inter-frequency neighboring cell list in the SIB11 or SIB12. If in the preceding condition, the inter-RAT measurement indicator is set to TRUE, the UE performs inter-RAT measurement and cell reselection assessment according to the inter-RAT neighboring cell list in the SIB11 or SIB12. If the inter-frequency FDD measurement indicator and Inter-RAT measurement indicator are set to FALSE in the system message, the UE does not start corresponding measurement and cell reselection. If the inter-frequency FDD measurement indicator and Inter-RAT measurement indicator are set to TRUE but no inter-frequency or inter-RAT neighboring cell is Enumeration Type NOT_REQUIRE, INTER_FREQ, INTER_RAT, INTER_FREQ_AND_INTER_RAT
Measurement quantity used in measurement-based
inter-frequency DRD in event (2C) triggered or
periodical reporting mode.
- CPICH: Common Pilot Channel
- Ec/No: Signal-to-Noise Ratio
- RSCP: Received Signal Code Power
- CPICH_Ec/No: to use the Ec/No measurement
quantity for event 2C or Inter-Frequency periodical
measurement. The physical unit is dB.
- CPICH_RSCP: to use the RSCP measurement
quantity for event 2C or Inter-Frequency periodical
measurement. The physical unit is dBm.
- BOTH:both quantities of the target cell must be
satisfied when performing the handover
judgement.Valid when the Inter-Frequency
measurement chooses PERIODICAL_REPORTING
Mode. Recommended value (default value):
BOTH(PERIODICAL_REPORTING Mode),
CPICH_RSCP(EVENT_TRIGGER Mode)
Enumeration Type CPICH_EC/NO~0 CPICH_RSCP~1 BOTH
Timer length for inter-frequency measurement.
After inter-frequency measurement starts, if no inter-
frequency handover is performed when this timer
expires, the inter-frequency measurement and the
compressed mode (if started) are stopped. The value 0
indicates the timer is not to be enabled.
This parameter is used to prevent the long inter-
frequency measurement state (compressed mode) due
to unavailable measurement of the target cells that
meet the handover requirements.
Setting the value of this parameter smaller can reduce
the long-time impact of the compressed mode on the
serving cell. In this case, however, the compressed
mode might be stopped earlier and as a result the UE
cannot trigger inter-frequency handover. For the
coverage-based inter-frequency handover, call drops
may occur.
Interval Type 0~512
When it is checked, system supports inter-frequency neighboring detect function. Enumeration Type OFF, ON
Threshold of signal quality of the target frequency for
triggering inter-frequency measurement.
This parameter is used to set measurement control on
the event 2C.
The event 2C is triggered when the signal quality of
the target frequency is above this threshold. Interval Type -24~0
Threshold to trigger inter-frequency measurement
with measurement quantity of Ec/No for PS domain
non-HSPA services.
The inter-frequency measurement start Ec/No
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to activate
the compressed mode and start inter-frequency
measurement, if the UE reports event 2D when the
measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -17 dB; for
the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for
the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -14 dB.
Through emulation, the call drop rate remains low for
the UEs moving at the speed of 120 km/h when this
parameter is set to -14 dB.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -24~0
Threshold to trigger inter-frequency measurement
with measurement quantity of RSCP for PS domain
non-HSPA services.
The inter-frequency measurement start RSCP
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to activate
the compressed mode and start inter-frequency
measurement, if the UE reports event 2D when the
measured value is smaller than the value of this
parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -100 dBm;
for the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -97 dBm;
for the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -93 dBm.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -95 dBm.
Through emulation, the call drop rate remains low for
the UEs moving at the speed of 120 km/h when this
parameter is set to -95 dBm.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -115~-25
Threshold to stop inter-frequency measurement with
measurement quantity of Ec/No for PS domain non-
HSPA services.
The inter-frequency measurement stop Ec/No
threshold (namely, compressed mode stop threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it means that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -24~0
Threshold to stop inter-frequency measurement with
measurement quantity of RSCP for PS domain non-
HSPA services.
The inter-frequency measurement stop RSCP
threshold (namely, compressed mode stop threshold)
is one of the key parameters in the inter-frequency
handover policy. This parameter affects the proportion
of the UEs in compressed mode active status of a cell
and the success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the moving speed of the UE and the cell radius.
For PS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it means that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it means that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -115~-25
Cell-level switch for inter-frequency and inter-RAT
handover.
INTERFREQ: only measuring inter-frequency cells
and performing inter-frequency handover.
INTERRAT: only measuring GSM cells and
performing inter-RAT handover .
SIMINTERFREQRAT: measuring both inter-
frequency and inter-RAT cells, performing inter-
frequency or inter-RAT handover according to the
type of the cell that first meets the handover decision
condition.
The parameter decides the handover for each cell
when the inter-frequency and inter-RAT cells coexist.
Enumeration Type INTERFREQ(inter-frequency handover only), INTERRAT(inter-RAT handover only), SIMINTERFREQRAT(inter-frequency and inter-RAT handover)
Inter-frequency measurement report mode.
PERIODICAL_REPORTING: periodical inter-
frequency measurement report
EVENT_TRIGGER: event-triggered inter-frequency
measurement report
There are two inter-frequency handover report modes
in the RNC, namely, event-triggered measurement
report and periodical measurement report. The report
mode is selected by setting the inter-frequency report
mode switch that is RNC-oriented.
- Event-triggered measurement report
Use event 2B to decide whether to trigger inter-
frequency handover. This prevents the ping-pong
effect from occurring before and after inter-frequency
handover (The quality of the currently used frequency
is lower than the absolute threshold "used frequency
quality threshold", and the quality of the unused
frequency is higher than another absolute threshold
"target frequency trigger threshold". ) The reason is
that event 2B cannot change from event-triggered
mode to periodical mode and cannot reattempt if the
non-handover attempt fails, unless this cell can trigger
event 2B again.
The advantage of event-triggered report mode is that
the signaling transmission and processing load are
saved. Comparing the signal quality between intra-
frequency and inter-frequency handovers, the ping-
pong effect in handover is prevented to some extent.
The disadvantage of event-triggered report mode is
that the event is reported only once and cannot be
changed to periodical mode. If the handover fails, the
periodical report is triggered only by the internal
timer. For the cell-oriented algorithm parameters, each
time when the best cell is updated, the inter-frequency
Enumeration Type PERIODICAL_REPORTING(Periodical reporting), EVENT_TRIGGER(Event trigger)
This parameter is used to increase time of inter-freqency reselection. It is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type 4~19,255
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this parameter is, the earlier uplink MBDR algorithm of inter frequency goes into overload state. When cell load is higher than the product of uplink cell admission control threshold and this parameter, and is lower than the uplink cell admission control threshold, uplink MBDR algorithm of inter frequency is in overload state. Interval Type 0~100
This parameter specifies whether inter-RAT handover of the UE among different operators is allowed. Enumeration Type NO, YES
This parameter specifies whether intra-RAT handover of the UE among different operators is allowed. Enumeration Type NO, YES
MBDR switch. Bit Field Type CSAMR_INTERRAT(CS AMR inter-RAT switch)
Threshold to trigger inter-RAT measurement with
measurement quantity of Ec/No for CS domain
services.
The inter-RAT measurement start RSCP threshold
(namely, compressed mode start threshold) is one of
the key parameters in the inter-RAT handover policy.
This parameter affects the proportion of the UEs in
compressed mode active status of a cell and the
success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the
measurement quantity for inter-RAT measurement,
the RNC sends the signaling to activate compressed
mode and start inter-RAT measurement, if the UE
reports event 2D when the measured value is smaller
than the value of this parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -17 dB; for
the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for
the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -14 dB.
Through emulation, the call drop rate remains lower
for the UEs moving at the speed of 120 km/h when
this parameter is set to -14 dB.
If the cell is a macro cell, it indicates that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
Interval Type -24~0
Threshold to trigger inter-RAT measurement with
measurement quantity of RSCP for CS domain
services.
For CS domain services, when RSCP is used as the
measurement quantity for inter-RAT measurement,
the RNC sends the signaling to activate compressed
mode and start inter-RAT measurement, if the UE
reports the event 2D when the measured value is
smaller than the value of this parameter.
If you want to start the compressed mode earlier, set
the threshold for event 2D larger. Otherwise, set the
threshold for event 2D smaller; if you want to reduce
the ping-pong effect of starting and stopping the
compressed mode, set the difference between events
2D and 2F larger.
In most cases, UEs want to be maintained within a 3G
network. Thus, the start threshold of the inter-RAT
measurement is set smaller than that of the inter-
frequency measurement. This facilitates the triggering
of the inter-frequency handover. For scenarios where
no inter-frequency neighboring cells or where inter-
frequency coverage is not ample, the inter-RAT
measurement start threshold should be set relatively
larger so as to facilitate the triggering of inter-RAT
measurement. Thus, call drops reduce.
Interval Type -115~-25
Threshold to stop inter-RAT measurement with
measurement quantity of Ec/No for CS domain
services.
The inter-RAT measurement stop RSCP threshold
(namely, compressed mode stop threshold) is one of
the key parameters in the inter-RAT handover policy.
This parameter affects the proportion of the UEs in
compressed mode active status of a cell and the
success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the speed of the UE and the cell radius.
For CS domain services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it indicates that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it indicates that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -24~0
Threshold to stop inter-RAT measurement with
measurement quantity of RSCP for CS domain
services.
For CS domain services, when RSCP is used as the
measurement quantity for inter-RAT measurement,
the RNC sends the signaling to deactivate compressed
mode and stop inter-RAT measurement, if the UE
reports the event 2F when the measured value is larger
than the value of this parameter.
Interval Type -115~-25
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this parameter is, the earlier downlink MBDR algorithm of inter RAT goes into overload state. When cell load is higher than the product of downlink cell admission control threshold and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter RAT is in overload state. Interval Type 0~100
L3 filtering coefficient for inter-RAT measurement.
The larger the value of this parameter, the stronger the
smoothing effect and the higher the anti-fast-fading
capability, but the lower the signal change tracing
capability. If the value of this parameter is set too
small, unnecessary inter-system handovers may occur.
The parameter has the same physical meaning and
measurement model as the inter-frequency
measurement L3 filter coefficient. The report period is
480 ms. For specific analysis, refer to the intra-
frequency measurement layer 3 filter coefficients and
inter-frequency measurement layer 3 filter
coefficients.
The recommended values of the inter-RAT
measurement layer 3 filter coefficients in different
cells are as follows:
-In cells where the average moving speed of UEs is
low, there is a comparatively big shadow fading
square error, so the recommended value of inter-RAT
measurement layer 3 filter coefficients is 4. The value
can be increased in a certain degree;
-In cells where the average moving speed of UEs is
medium, there is a comparatively big shadow fading
square error, so the recommended value of inter-RAT
measurement layer 3 filter coefficients is 3;
-In cells where the average moving speed of UEs is
high, there is a comparatively small shadow fading
square error, so the recommended value of inter-RAT
measurement layer 3 filter coefficients is 2.
Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
The maximum number of attempts to perform non-
coverage-based inter-RAT handovers.
This parameter specifies the maximum number of
attempts for the RNC to perform inter-RAT handovers
after a non-coverage-based inter-RAT handover
failure. The handover attempts should involve the
target cells that have not been tried but satisfy the
handover conditions.
Interval Type 1~16
This parameter specifies whether the inter-RAT handover, for example, to the GSM network, is performed when the RNC cannot meet the accuracy requirements of the emergency calls for the LCS. This parameter enables emergency calls to obtain the LCS of significant accuracy in a different system. Enumeration Type NO, YES
Quality requirement for the inter-RAT cell during an
inter-RAT handover with CS domain services.
This parameter is used to set measurement control on
the event 3C. The event 3C is triggered when the
signal quality of the target frequency is above this
threshold. Note that the value 0 indicates that the
physical value is smaller than -110 dBm.
If the periodical report mode is used, the inter-RAT
handover decision thresholds are used for the
assessment of inter-RAT coverage handover, namely
as Tother_RAT in the following formulas. The inter-
RAT handover decision thresholds are the absolute
thresholds (RSSI) of inter-RAT cell quality for the
inter-RAT handover decision.
If the quality of another RAT in the inter-RAT
measurement report meets the following condition:
Mother_RAT + CIO >= Tother_RAT + H/2
the system starts the trigger timer and implements the
handover decision after timeout. If the quality of the
preceding RAT meets the following condition before
timeout:
Mother_RAT + CIO < Tother_RAT - H/2
The system stops the timer, and the RNC waits for
another inter-RAT measurement report.
In which,
Mother_RAT indicates the measurement result of the
GSM RSSI;
Tother_RAT indicates the inter-RAT handover
decision threshold;
Cell Individual Offset (CIO) indicates the offset of the
inter-RAT cell;
H represents the hysteresis. Hysteresis can reduce
wrong decisions caused by signal jitters.
The sensitivity of a GSM mobile phone is -102 dBm,
Interval Type 0~63
This parameter specifies the type of inter-RAT handover that is performed when the RNC cannot meet the accuracy requirements of the emergency calls for the LCS. Enumeration Type DRD, MEAS_BASED
Threshold to trigger inter-RAT measurement with
measurement quantity of Ec/No for HSDPA services.
The inter-frequency measurement start RSCP
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-RAT
handover policy.
This parameter affects the proportion of the UEs in
compressed mode active status of a cell and the
success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the speed of the UE and the cell radius.
For HSDPA services, when Ec/No is used as the
measurement quantity for inter-RAT measurement,
the RNC sends the signaling to activate compressed
mode and start inter-RAT measurement, if the UE
reports event 2D when the measured value is smaller
than the value of this parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -17 dB; for
the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for
the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -14 dB.
Through emulation, the call drop rate remains lower
for the UEs moving at the speed of 120 km/h when
this parameter is set to -14 dB.
If the cell is a macro cell, it indicates that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
Interval Type -24~0
Threshold to trigger inter-RAT measurement with
measurement quantity of RSCP for HSDPA services.
For non-HSDPA services, when RSCP is used as the
measurement quantity for inter-RAT measurement,
the RNC sends the signaling to activate compressed
mode and start inter-RAT measurement, if the UE
reports the event 2D when the measured value is
smaller than the value of this parameter.
If you want to start the compressed mode earlier, set
the threshold for event 2D larger. Otherwise, set the
threshold for event 2D smaller; if you want to reduce
the ping-pong effect of starting and stopping the
compressed mode, set the difference between events
2D and 2F larger.
In most cases, UEs want to be maintained within a 3G
network. Thus, the start threshold of the inter-RAT
measurement is set smaller than that of the inter-
frequency measurement. This facilitates the triggering
of the inter-frequency handover. For scenarios where
no inter-frequency neighboring cells or where inter-
frequency coverage is not ample, the inter-RAT
measurement start threshold should be set relatively
larger so as to facilitate the triggering of inter-RAT
measurement. Thus, call drops reduce.
Interval Type -115~-25
Threshold to stop inter-RAT measurement with
measurement quantity of Ec/No for HSDPA services.
The inter-RAT measurement stop RSCP threshold
(namely, compressed mode stop threshold) is one of
the key parameters in the inter-RAT handover policy.
This parameter affects the proportion of the UEs in
compressed mode active status of a cell and the
success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the speed of the UE and the cell radius.
For HSPA services, when Ec/No is used as the
measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it indicates that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it indicates that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
the ping-pong effect of starting and stopping the
Interval Type -24~0
Threshold to stop inter-RAT measurement with
measurement quantity of RSCP for HSDPA services.
For HSDPA services, when RSCP is used as the
measurement quantity for inter-RAT measurement,
the RNC sends the signaling to deactivate compressed
mode and stop inter-RAT measurement, if the UE
reports the event 2F when the measured value is larger
than the value of this parameter.
Interval Type -115~-25
Timer length for inter-RAT measurement.
After inter-RAT measurement starts, if no inter-RAT
handover is performed when this timer times out, the
inter-RAT measurement is stopped. In addition, the
compressed mode is deactivated, if any; If the value is
0, you can infer that the inter-RAT measurement timer
is not started.
To set this parameter, you need to consider the
following factors:
This parameter aims to prevent that the handover
conditions are not met and the compressed mode is
kept for a long time when the UE does not move or is
moving in a low speed. The service quality is
adversely affected and the total available capacity
decreases if the compressed mode is kept for a long
time.
Most inter-RAT handovers can be finished within 60
s.
As for the impact on network performance,
If the InterRATMeasTime is excessively low, the UE
cannot finish inter-RAT handovers. If
InterRATMeasTime is excessively high, it cannot
help improve the service quality. In actual networks,
statistics can be made to obtain the delay for a
successful inter-RAT handover so as to get a proper
value of InterRATMeasTime that satisfies most UEs.
Interval Type 0~512
When it is checked, system supports inter-rat neighboring detect function. Enumeration Type OFF, ON
Quality requirement for the inter-RAT cell during an
inter-RAT handover with CS domain services.
This parameter is used to set measurement control on
the event 3C. The event 3C is triggered when the
signal quality of the target frequency is above this
threshold. Note that the value 0 indicates that the
physical value is smaller than -110 dBm.
If the periodical report mode is used, the inter-RAT
handover decision thresholds are used for the
assessment of inter-RAT coverage handover, namely
as Tother_RAT in the following formulas. The inter-
RAT handover decision thresholds are the absolute
thresholds (RSSI) of inter-RAT cell quality for the
inter-RAT handover decision.
If the quality of another RAT in the inter-RAT
measurement report meets the following condition:
Mother_RAT + CIO >= Tother_RAT + H/2
the system starts the trigger timer and implements the
handover decision after timeout. If the quality of the
preceding RAT meets the following condition before
timeout:
Mother_RAT + CIO < Tother_RAT - H/2
The system stops the timer, and the RNC waits for
another inter-RAT measurement report.
In which,
Mother_RAT indicates the measurement result of the
GSM RSSI;
Tother_RAT indicates the inter-RAT handover
decision threshold;
Cell Individual Offset (CIO) indicates the offset of the
inter-RAT cell;
H represents the hysteresis. Hysteresis can reduce
wrong decisions caused by signal jitters.
The sensitivity of a GSM mobile phone is -102 dBm,
Interval Type 0~63
Quality requirement for the inter-RAT cell during an
inter-RAT handover with PS domain services.
This parameter is used to set measurement control on
the event 3C. The event 3C is triggered when the
signal quality of the target frequency is above this
threshold. Note that the value 0 indicates that the
physical value is smaller than -110 dBm.
If the periodical report mode is used, the inter-RAT
handover decision thresholds are used for the
assessment of inter-RAT coverage handover, namely
as Tother_RAT in the following formulas. The inter-
RAT handover decision thresholds are the absolute
thresholds (RSSI) of inter-RAT cell quality for the
inter-RAT handover decision.
If the quality of another RAT in the inter-RAT
measurement report meets the following condition:
Mother_RAT + CIO >= Tother_RAT + H/2
the system starts the trigger timer and implements the
handover decision after timeout. If the quality of the
preceding RAT meets the following condition before
timeout:
Mother_RAT + CIO < Tother_RAT - H/2
The system stops the timer, and the RNC waits for
another inter-RAT measurement report.
In which,
Mother_RAT indicates the measurement result of the
GSM RSSI;
Tother_RAT indicates the inter-RAT handover
decision threshold;
Cell Individual Offset (CIO) indicates the offset of the
inter-RAT cell;
H represents the hysteresis. Hysteresis can reduce
wrong decisions caused by signal jitters.
The sensitivity of a GSM mobile phone is -102 dBm,
Interval Type 0~63
Interval that the UE reports inter-RAT measurement
results to the RNC.
In periodical report mode, the interval between two
reports is the configured value. That is, the UE
submits reports at intervals of the configured time.
The value "NON_PERIODIC_REPORT" is, however,
not recommended. In this setting, the UE behavior is
not defined.
Because the GSM RSSI measurement period is 480
ms, the inter-RAT periodical report interval should be
longer than 480 ms. If InterPeriodReportInterval is
excessively high, the handover judging time will be
long, and handovers will be slower.
The InterPeriodReportInterval is adjusted according to
the configured GSM RSSI measurement compressed
mode sequence. According to the current configured
GSM RSSI measurement compressed mode sequence,
the RSSI measurement of eight GSM cells can be
finished in 480 ms, so the RSSI measurement of 16
GSM cells can be finished in 1000 ms. According to
the protocol, not more than 32 inter-RAT neighboring
cells exist, so the InterPeriodReportInterval can be set
to 2000 ms if neighboring GSM cells exceeds 16.
This parameter has impact on the Uu signaling flow.
If the interval is too short and the frequency is too
high, the RNC may have burden in processing
signaling. If the interval is too long, the network
cannot detect the signal change in time, which may
delay the inter-RAT handover and thus cause call
drops.
Enumeration Type NON_PERIODIC_REPORT(Non periodical reporting), D250~1 D500~2 D1000~3 D2000~4 D3000~5 D4000~6 D6000~7 D8000~8 D12000~9 D16000~10 D20000~11 D24000~12 D28000~13 D32000~14 D64000
Threshold of Inter-RAT handover failure due to
physical channel failure. When the times of Inter-
RAT handover failures due to physical channel failure
exceeds the threshold, UE will be turned into penalty
state. And no try of Inter-Rat handover will be taken
until penalty finishes.
Also see parameter
PenaltyTimeForInterRatPhyChFail.
Interval Type 0~63
Inter-RAT ping-pong hysteresis.
When a UE in the CS domain is handed over from a
2G network to a 3G network, the system increase 3A
Hysteresis to prevent UE ping-pong handover
between the 2G network and the 3G network in the
period specified by this parameter. During the penalty
time, the previous periodical report will be changed to
the event 3A report. If this parameter is 0,the system
will not start the ping-pong handover punish timer.
Interval Type 0~15
Inter-RAT ping-pong timer.
When a UE in the CS domain is handed over from a
2G network to a 3G network, the system increase 3A
Hysteresis to prevent UE ping-pong handover
between the 2G network and the 3G network in the
period specified by this parameter. During the penalty
time, the previous periodical report will be changed to
the event 3A report. If this parameter is 0,the system
will not start the ping-pong handover punish timer.
Interval Type 0~65535
Threshold to trigger inter-RAT measurement with
measurement quantity of Ec/No for PS domain non-
HSDPA services.
The inter-frequency measurement start RSCP
threshold (namely, compressed mode start threshold)
is one of the key parameters in the inter-RAT
handover policy.
This parameter affects the proportion of the UEs in
compressed mode active status of a cell and the
success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the speed of the UE and the cell radius.
For PS domain non-HSDPA services, when Ec/No is
used as the measurement quantity for inter-RAT
measurement, the RNC sends the signaling to activate
compressed mode and start inter-RAT measurement,
if the UE reports event 2D when the measured value
is smaller than the value of this parameter.
For the UE moving at the speed of 5 km/h, it is
recommended that this parameter be set to -17 dB; for
the UE moving at the speed of 50 km/h, it is
recommended that this parameter be set to -14 dB; for
the UE moving at the speed of 120 km/h, it is
recommended that this parameter be set to -12 dB.
For the cell in which the UEs are moving at various
speeds, this parameter should be set to -14 dB.
Through emulation, the call drop rate remains lower
for the UEs moving at the speed of 120 km/h when
this parameter is set to -14 dB.
If the cell is a macro cell, it indicates that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
Interval Type -24~0
Threshold to trigger inter-RAT measurement with
measurement quantity of RSCP for PS domain non-
HSDPA services.
For PS domain HSDPA services, when RSCP is used
as the measurement quantity for inter-RAT
measurement, the RNC sends the signaling to activate
compressed mode and start inter-RAT measurement,
if the UE reports the event 2D when the measured
value is smaller than the value of this parameter.
If you want to start the compressed mode earlier, set
the threshold for event 2D larger. Otherwise, set the
threshold for event 2D smaller; if you want to reduce
the ping-pong effect of starting and stopping the
compressed mode, set the difference between events
2D and 2F larger.
In most cases, UEs want to be maintained within a 3G
network. Thus, the start threshold of the inter-RAT
measurement is set smaller than that of the inter-
frequency measurement. This facilitates the triggering
of the inter-frequency handover. For scenarios where
no inter-frequency neighboring cells or where inter-
frequency coverage is not ample, the inter-RAT
measurement start threshold should be set relatively
larger so as to facilitate the triggering of inter-RAT
measurement. Thus, call drops reduce.
Interval Type -115~-25
Threshold to stop inter-RAT measurement with
measurement quantity of Ec/No for PS domain non-
HSDPA services.
The inter-RAT measurement stop RSCP threshold
(namely, compressed mode stop threshold) is one of
the key parameters in the inter-RAT handover policy.
This parameter affects the proportion of the UEs in
compressed mode active status of a cell and the
success rate of the hard handover. To set this
parameter, you need to consider the following factors:
the speed of the UE and the cell radius.
For PS domain HSPA services, when Ec/No is used as
the measurement quantity for inter-frequency
measurement, the RNC sends the signaling to stop the
compressed mode and the inter-frequency
measurement, if the UE reports event 2F when the
measured value is larger than the value of this
parameter.
If the cell is a macro cell, it indicates that micro cells
exist in this cell. To enable the traffic absorption
function of the micro cells, the compressed mode start
threshold should be set higher and the stop threshold
be set lower, that is, the threshold for event 2D/2F be
set higher by using CPICH RSCP.
If the cell is a micro cell, it indicates that the default
value should be modified according to the link
estimate result.
Events 2D and 2F are the compressed mode start and
stop switches. When the cell is located in the center of
the frequency coverage or the inter-frequency
measurement quantity is set to BOTH, Ec/No serves
as the decision standard for events 2D and 2F. If you
want to start the compressed mode earlier, set the
threshold for event 2D larger; if you want to reduce
Interval Type -24~0
Threshold to stop inter-RAT measurement with
measurement quantity of RSCP for PS domain non-
HSDPA services.
For PS domain non-HSDPA services, when RSCP is
used as the measurement quantity for inter-RAT
measurement, the RNC sends the signaling to
deactivate compressed mode and stop inter-RAT
measurement, if the UE reports the event 2F when the
measured value is larger than the value of this
parameter.
Interval Type -115~-25
Inter-RAT measurement report mode.
When PERIODICAL_REPORTING is selected, you
can infer that periodical inter-RAT measurement
report is adopted; when EVENT_TRIGGER is
selected, you can infer that event-triggered inter-RAT
measurement report is adopted.
The RNC includes two modes of the inter-RAT
measurement report. The event triggered report and
the periodical report are selected according to the inter-
RAT measurement report mode switch.
-Event-triggered measurement report
To avoid the ping-pong effect before and after the
inter-RAT handover, event 3A where the currently
used frequency quality is lower than the absolute
threshold and the signal level of the GSM cell is
higher than another absolute threshold is the
triggering event that determines the inter-RAT
handover. To improve the handover success rate, the
BSIC of the GSM cell where the event 3A is triggered
must be decoded correctly by the UE. The reason is
that event 3A cannot change from event-triggered
mode to periodical mode and cannot reattempt if the
handover attempt fails, unless this cell can trigger
event 3A again.
The advantage of event-triggered report mode is that
signaling transmission is reduced and the load is
shared. By comparing the signal quality between the
current frequency and inter-RAT frequency, the ping-
pong effect in the handover is prevented to some
extent. The disadvantage of event-triggered report
mode is that the event is reported only once and
cannot be changed to periodical mode. If the handover
fails, the periodical report is triggered only by the
Enumeration Type PERIODICAL_REPORTING(Periodical reporting), EVENT_TRIGGER(Event trigger)
This parameter is used to increase time of inter-RAT reselection. It is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type 4~19,255
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this parameter is, the earlier uplink MBDR algorithm of inter RAT goes into overload state. When cell load is higher than the product of uplink cell admission control threshold and this parameter, and is lower than the uplink cell admission control threshold, uplink MBDR algorithm of inter RAT is in overload state. Interval Type 0~100
This parameter specifies the interval for sending packets for starting the EthOAM loopback test. Interval Type 1~10
This parameter specifies the Ec/No absolute
threshold of event 1F in the SHO algorithm,
corresponding to the guarantee signal strength with
QoS of basic service. The parameter affects the
triggering of event 1F.
Event 1F is used to trigger the emergency blind
handover. If the best cell of the active set reports
event 1F, which means that the active cell is very poor
quality, then the blind handover is triggered as the last
attempt before call drop.
The emergency blind handover is a special occasion
that requires on-site measurements on the scope of the
pilot strength of the best cell at the location where the
blind handover is triggered. Generally, this function
need not be started, so the parameter is set to the
lowest value by default, indicating that the blind
handover is not triggered.
The larger the set value is, the more easily the event
1F can be triggered. The smaller the set value is, the
more difficultly the event 1F can be triggered. For the
definition of event 1F, refer to 3GPP TS 25.331.
As for the impact on network performance:
The higher the threshold is, the more easily the event
1F can be triggered. The lower the threshold is, the
more difficult the event 1F can be triggered. In real
situations, the threshold can be adjusted according to
the handover strategy and network coverage.
Interval Type -24~0
This parameter specifies the RSCP absolute threshold
of event 1F in the SHO algorithm, corresponding to
the guarantee signal strength with the QoS of basic
service. The parameter affects the triggering of event
1F.
Event 1F is used to trigger the emergency blind
handover. If the best cell of the active set reports
event 1F, which means that the active cell is very poor
quality, then the blind handover is triggered as the last
attempt before call drop.
The emergency blind handover is a special occasion
that requires on-site measurements on the scope of the
pilot strength of the best cell at the location where the
blind handover is triggered. Generally, this function
need not be started, so the parameter is set to the
lowest value by default, indicating that the blind
handover is not triggered.
The larger the set value is, the more easily the event
1F can be triggered. The smaller the set value is, the
more difficultly the event 1F can be triggered. For the
definition of event 1F, refer to 3GPP TS 25.331.
As for the impact on network performance:
The higher the threshold is, the more easily the event
1F can be triggered. The lower the threshold is, the
more difficult the event 1F can be triggered. In real
situations, the threshold can be adjusted according to
the handover strategy and network coverage.
Interval Type -115~-25
According to the 3GPP TS 25.331, the filtering of the
measurement value is calculated using the following
formula, where k represents this parameter:
Fn = (1 - a) * Fn - 1 + a * Mn
Here,
Fn: the updated filtered measurement result
Fn - 1: the old filtered measurement result
Mn: the latest received measurement result from
physical layer measurements
a = (1/2)(k/2). When a is set to 1, this means L3
filtering will not be applied.
L3 filtering should be able to filter as much random
impulse as possible. Thus the filtered measurement
value can reflect the varying of the actual
measurement value. The input measurement value to
L3 filter has been filtered by L1 filter, where the
impact of fast fading is almost eliminated. So the L3
filtering should apply smooth filtering to shadow
fading and small amount of remaining fast fading,
thus providing more reliable measurement value for
event judgement.
As for the impact on network performance:
the larger the value of this parameter, the stronger the
smoothing effect and the higher the anti-fast-fading
capability, but the lower the signal tracing capability,
the greater the possibility of call drops. If the value of
this parameter is too small, unnecessary soft handover
or the ping-pong handover may occur.
Note that this parameter has great impact on the
overall performance of the handover, so you should be
cautious when adjusting this parameter.
Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
Identifying the period of the Intra-frequency load balance algorithm. When the cell load is high, the cell PCPICH TX power can be periodically reduced in order to enable users in connected mode to be switched over to other cells more easily, thus reducing the local cell load. Interval Type 1~86400
Indicating whether the intra-frequency measurement control information should be delivered through the system information. Generally the cell should deliver the intra-frequency measurement control information. When the intra-frequency measurement control information (the preconfiguration of the measurement control) is delivered in the system, the UE can start the intra-frequency measurement and send the measurement report immediately after it enters CELL_DCH state, and the soft handover can be more quickly finished by the UE to avoid call drops when the UE is in the soft handover area. The preconfiguration of measurement control can enable the UE in the soft handover area to implement soft handovers more quickly to decrease the call drop rate. With the preconfiguration function, the UEs in the single signaling state perform soft handovers in a higher probability. If the CN delivers the RAB assignment before a soft handover is complete, the delay of UE service setup may increase. For details, refer to the 3GP Enumeration Type REQUIRE, NOT_REQUIRE
This parameter specifies the intra-frequency measurement quantity. It defines the reference measurement quantity for the UE to report event 1x. For events 1A, 1B, 1C, and 1D which adopt relative thresholds, the measurement quantity does not have great impact on the threshold values. For event 1F which adopts absolute threshold, the measurement quantity should be set based on the reality of the cell. If the cell is located in the center of the coverage area, the main factor that affects signal quality is intra-frequency interference. In this case, CPICH_EC/NO is recommended. If the cell is located at the border of the coverage area, the main factor that affects signal quality is the distance between the cell and the base station. In this case, CPICH_RSCP is recommended. Enumeration Type CPICH_EC/NO, CPICH_RSCP
When it is checked, system supports intra-frequency neighboring detect function. DETSET_RPRT_SWITCH switch in HoSwitch in SET CORRMALGOSWITCH can also start the intra-frequency neighboring detect function. Either switch is checked, the RNC starts the intra-frequency neighboring detect function. Enumeration Type OFF, ON
Relative threshold of the event 1A. The greater the value of this parameter is, the more easily the event 1A is triggered. Interval Type 0~29
This parameter specifies the CS non-VP service
relative threshold of event 1A. The higher the
threshold is, the more easily the event 1A is triggered.
The lower the threshold is, the harder the event 1A is
triggered.
For the definition of event 1A, refer to 3GPP TS
25.331.
The relative threshold can directly affect the ratio of
the UE involved in soft handover (SHO ratio). So the
threshold should be wisely chosen to achieve smooth
SHOs.
The value of this parameter determines the SHO area
and SHO ratio. For the CDMA system, the ratio of the
UE involved in soft handover should reach 30% to
40% to ensure smooth handover. Based on simulation
results, when the relative threshold is set to 5 dB, the
ratio of the UE involved in soft handover (the number
of cells in the active set is at least 2) is approximately
35%. It is recommended to set the relative threshold a
little higher (5 dB to 7 dB) during site deployment,
and to reduce the threshold when the users increase.
But the threshold must be higher than 3 dB to avoid
the ping-pong handover.
In some specific applications, you can set different
relative thresholds for event 1A and event 1B to
reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be
curbed by adjusting the hysteresis values for event 1A
and event 1B, you can curb it by setting a higher
relative threshold for event 1B than that for event 1A.
In general applications, however, the relative
thresholds for event 1A and 1B should be equal, and
you can curb the ping-pong effect through the time-to-
trigger, L3 filtering coefficient, and hysteresis.
Interval Type 0~29
This parameter specifies the VP service relative
threshold of event 1A. The higher the threshold is, the
more easily the event 1A is triggered. The lower the
threshold is, the harder the event 1A is triggered. For
the definition of event 1A, refer to 3GPP TS 25.331.
The relative threshold can directly affect the ratio of
the UE involved in soft handover (SHO ratio). So the
threshold should be wisely chosen to achieve smooth
SHOs.
The value of this parameter determines the SHO area
and SHO ratio. For the CDMA system, the ratio of the
UE involved in soft handover should reach 30% to
40% to ensure smooth handover. Based on simulation
results, when the relative threshold is set to 5 dB, the
ratio of the UE involved in soft handover (the number
of cells in the active set is at least 2) is approximately
35%. It is recommended to set the relative threshold a
little higher (5 dB to 7 dB) during site deployment,
and to reduce the threshold when the users increase.
But the threshold must be higher than 3 dB to avoid
the ping-pong handover.
In some specific applications, you can set different
relative thresholds for event 1A and event 1B to
reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be
curbed by adjusting the hysteresis values for event 1A
and event 1B, you can curb it by setting a higher
relative threshold for event 1B than that for event 1A.
In general applications, however, the relative
thresholds for event 1A and 1B should be equal, and
you can curb the ping-pong effect through the time-to-
trigger, L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
The value of this parameter determines the SHO area
Interval Type 0~29
This parameter specifies the PS service relative
threshold of event 1A. The higher the threshold is, the
more easily the event 1A is triggered. The lower the
threshold is, the harder the event 1A is triggered.
For the definition of event 1A, refer to 3GPP TS
25.331.
The relative threshold can directly affect the ratio of
the UE involved in soft handover (SHO ratio). So the
threshold should be wisely chosen to achieve smooth
SHOs.
The value of this parameter determines the SHO area
and SHO ratio. For the CDMA system, the ratio of the
UE involved in soft handover should reach 30% to
40% to ensure smooth handover. Based on simulation
results, when the relative threshold is set to 5 dB, the
ratio of the UE involved in soft handover (the number
of cells in the active set is at least 2) is approximately
35%. It is recommended to set the relative threshold a
little higher (5 dB to 7 dB) during site deployment,
and to reduce the threshold when the users increase.
But the threshold must be higher than 3 dB to avoid
the ping-pong handover.
In some specific applications, you can set different
relative thresholds for event 1A and event 1B to
reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be
curbed by adjusting the hysteresis values for event 1A
and event 1B, you can curb it by setting a higher
relative threshold for event 1B than that for event 1A.
In general applications, however, the relative
thresholds for event 1A and 1B should be equal, and
you can curb the ping-pong effect through the time-to-
trigger, L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
Interval Type 0~29
Relative threshold of the event 1B. The lower the value of this parameter is, the more easily the event 1B is triggered. Interval Type 0~29
This parameter specifies the CS non-VP service
relative threshold of event 1B. The lower the
threshold is, the more easily the event 1B is triggered.
The higher the threshold is, the harder the event 1B is
triggered.
For the definition of event 1B, refer to 3GPP TS
25.331.
The relative threshold can directly affect the ratio of
the UE involved in soft handover (SHO ratio). So the
threshold should be wisely chosen to achieve smooth
SHOs.
The value of this parameter determines the SHO area
and SHO ratio. For the CDMA system, the ratio of the
UE involved in soft handover should reach 30% to
40% to ensure smooth handover. Based on simulation
results, when the relative threshold is set to 5 dB, the
ratio of the UE involved in soft handover (the number
of cells in the active set is at least 2) is approximately
35%. It is recommended to set the relative threshold a
little higher (5 dB to 7 dB) during site deployment,
and to reduce the threshold when the users increase.
But the threshold must be higher than 3 dB to avoid
the ping-pong handover.
In some specific applications, you can set different
relative thresholds for event 1A and event 1B to
reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be
curbed by adjusting the hysteresis values for event 1A
and event 1B, you can curb it by setting a higher
relative threshold for event 1B than that for event 1A.
In general applications, however, the relative
thresholds for event 1A and 1B should be equal, and
you can curb the ping-pong effect through the time-to-
trigger, L3 filtering coefficient, and hysteresis.
Interval Type 0~29
This parameter specifies the PS service relative
threshold of event 1B. The lower the threshold is, the
more easily the event 1B is triggered. The higher the
threshold is, the harder the event 1B is triggered.
For the definition of event 1B, refer to 3GPP TS
25.331.
The relative threshold can directly affect the ratio of
the UE involved in soft handover (SHO ratio). So the
threshold should be wisely chosen to achieve smooth
SHOs.
The value of this parameter determines the SHO area
and SHO ratio. For the CDMA system, the ratio of the
UE involved in soft handover should reach 30% to
40% to ensure smooth handover. Based on simulation
results, when the relative threshold is set to 5 dB, the
ratio of the UE involved in soft handover (the number
of cells in the active set is at least 2) is approximately
35%. It is recommended to set the relative threshold a
little higher (5 dB to 7 dB) during site deployment,
and to reduce the threshold when the users increase.
But the threshold must be higher than 3 dB to avoid
the ping-pong handover.
In some specific applications, you can set different
relative thresholds for event 1A and event 1B to
reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be
curbed by adjusting the hysteresis values for event 1A
and event 1B, you can curb it by setting a higher
relative threshold for event 1B than that for event 1A.
In general applications, however, the relative
thresholds for event 1A and 1B should be equal, and
you can curb the ping-pong effect through the time-to-
trigger, L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
Interval Type 0~29
This parameter specifies the PS service relative
threshold of event 1B. The lower the threshold is, the
more easily the event 1B is triggered. The higher the
threshold is, the harder the event 1B is triggered.
For the definition of event 1B, refer to 3GPP TS
25.331.
The relative threshold can directly affect the ratio of
the UE involved in soft handover (SHO ratio). So the
threshold should be wisely chosen to achieve smooth
SHOs.
The value of this parameter determines the SHO area
and SHO ratio. For the CDMA system, the ratio of the
UE involved in soft handover should reach 30% to
40% to ensure smooth handover. Based on simulation
results, when the relative threshold is set to 5 dB, the
ratio of the UE involved in soft handover (the number
of cells in the active set is at least 2) is approximately
35%. It is recommended to set the relative threshold a
little higher (5 dB to 7 dB) during site deployment,
and to reduce the threshold when the users increase.
But the threshold must be higher than 3 dB to avoid
the ping-pong handover.
In some specific applications, you can set different
relative thresholds for event 1A and event 1B to
reduce the ping-pong effect and the soft handover
ratio. For example, if the ping-pong effect cannot be
curbed by adjusting the hysteresis values for event 1A
and event 1B, you can curb it by setting a higher
relative threshold for event 1B than that for event 1A.
In general applications, however, the relative
thresholds for event 1A and 1B should be equal, and
you can curb the ping-pong effect through the time-to-
trigger, L3 filtering coefficient, and hysteresis.
As for the impact on network performance:
Interval Type 0~29
CN flow control timer (long). If the OVERLOAD message is not received in this period, the traffic volume will be increased by a degree. Interval Type 15000~120000
This parameter specifies the local IP address of an IPoA PVC. IP Address Type -
This parameter specifies the local IP address of the Ethernet port. IP Address Type -
This parameter specifies the next hop IP address. IP Address Type -
Local IP address. It must be addresses configured on RNC (including interface board's device IP and port IP) . IP Address Type -
It specifies whether to enable the IP header compression function on the PPP link. Enumeration Type No_HC, UDP/IP_HC
This parameter specifies whether to enable the IP head compression function of a PPP link. Enumeration Type No_HC, UDP/IP_HC
This parameter specifies the index of the secondary IP address for the Ethernet port. Interval Type 1~5
This parameter specifies whether to bind the logical port. Enumeration Type NO, YES
This parameter specifies the logical port number the NodeB IP stack. Interval Type 0~119
This parameter specifies the number of the slot bearing NodeB IP transport. Interval Type 14~27
This parameter specifies the number of the subrack bearing NodeB IP transport. Interval Type 0~5
Indicating whether the Iub interface supports IP hybrid transport. Enumeration Type SUPPORT(Support), NOT_SUPPORT(Not support)
This parameter specifies whether an IP address is a primary or secondary IP address. Enumeration Type PRIMARY, SECOND
Indicating whether the UE allocated with Access Class 0 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 10 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 11 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 12 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 13 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 14 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 15 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 1 can be allowed to initate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 2 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 3 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 4 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 5 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 6 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 7 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 8 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
Indicating whether the UE allocated with Access Class 9 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331. Enumeration Type BARRED, NOT_BARRED
This parameter specifies whether the EtherOAM frame carries the flag indicating the active or standby role of a port. Enumeration Type NO, YES
Is first class transport resource group. Enumeration Type NO, YES
This parameter specifies whether the MAC-hs
window size is fixed.
- If this parameter is set to TRUE, the MAC-hs
window size is fixed.
- If this parameter is set to FALSE, the MAC-hs
window size is flexible. Enumeration Type FALSE, TRUE
This parameter specifies the flag of the primary operator. "YES" indicates that the license of the primary operator is to be activated, "NO" indicates that the license of the secondary operator is to be activated. Enumeration Type NO, YES
This parameter specifies whether to select a QoS path. Enumeration Type NO(NOT QOSPATH), YES(IS QOSPATH)
To determine whether the node is root node when Transport Type is ATM or ATM_IP. Enumeration Type NO, YES
Interface type. Enumeration Type IUB, IUR, IUCS, IUPS
When the Iu interface is faulty, the RNC gradually restricts cell access in Bar mode. When the Iu interface is restored, the RNC gradually enables cell access in Not Bar mode. This parameter defines the interval between the cell working in Bar mode and in Not Bar mode. In this way, the location update procedure can be distributed to a specified time period and the risk due to congestion is reduced. Interval Type 1~3600
Number of RABs selected in one DL traffic release. Interval Type 0~10
Number of RABs selected in one UL traffic release. Interval Type 0~10
A timer to Iu CS Release protection. Interval Type 1~65535
A timer to Iu PS Release protection. Interval Type 1~65535
Indicating whether to support congestion control over Iur interface of the neighboring RNC. Enumeration Type OFF, ON
Indicating whether to config neighbouring RNC's DSP index. Enumeration Type TRUE, FALSE
Indicating whether to support Hsdpa over Iur interface of the neighboring RNC. Enumeration Type OFF, ON
Indicating whether to support Hsupa over Iur interface of the neighboring RNC. Enumeration Type OFF, ON
Iu signaling connection identifier allocated by RNC for the user. Interval Type 0~16777215
Iu State Policy For RncPool. Enumeration Type NONE, IUCS, IUPS, IUCS_IUPS
This parameter specifies the expected RX type of J0. The setting of the expected RX byte must be consistent with that of the TX byte at the peer end. Enumeration Type NULL, 1byte, 16byte, 64byte
This parameter specifies the expected RX value of J0. The setting of the expected RX byte must be consistent with that of the TX byte at the peer end. String Type -
This parameter specifies the TX type of J0. The setting of the TX byte must be consistent with that of the expected RX byte at the peer end. Enumeration Type NULL, 1byte, 16byte, 64byte
This parameter specifies the TX value of J0. The setting of the TX byte must be consistent with that of the expected RX byte at the peer end. String Type -
This parameter specifies the expected RX type of J1. The setting of the expected RX byte must be consistent with that of the TX byte at the peer end. Enumeration Type NULL, 1byte, 16byte, 64byte
This parameter specifies the expected RX value of J1. The setting of the expected RX byte must be consistent with that of the TX byte at the peer end. String Type -
This parameter specifies the TX type of J1. The setting of the TX byte must be consistent with that of the expected RX byte at the peer end. Enumeration Type NULL, 1byte, 16byte, 64byte
This parameter specifies the TX value of J1. The setting of the TX byte must be consistent with that of the expected RX byte at the peer end. String Type -
This parameter specifies the expected J2 RX type. The setting of the expected RX byte must be consistent with that of the TX byte at the peer end. Enumeration Type NULL, 16byte, 64byte
This parameter specifies the expected J2 RX value. String Type -
This parameter specifies the J2 TX type. The setting of the TX byte must be consistent with that of the expected RX byte at the peer end. Enumeration Type NULL, 16byte, 64byte
This parameter specifies the J2 transmit value. String Type -
This parameter specifies whether the K2 byte has the bidirectional/unidirectional end or not. Enumeration Type NOT-INDICATE-END, INDICATE-END
Timer of waiting for STAT response from the peer end.Interval Type 100~1200,1000~3000
This parameter specifies whether the check is a key detect. If the check is a key detect, the check result may affect the fault handling of the port. Otherwise, the check result does not affect the fault handling of the port. Enumeration Type NO, YES
The Period of KPI Alarm Check,it's the times of KPI report period. Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8, D9, D10
RRC Report KPI Alarm Switch. Enumeration Type OFF, ON
Identifying a location area code for a PLMN. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003. Interval Type 1~65533,65535
This parameter specifies the antenna latitude of the GPS reference receiver. The latitude is expressed in the form of degree:minute:second. Interval Type -90000000~90000000
This parameter specifies the antenna latitude of the GPS reference receiver. The latitude is expressed in the form of degree:minute:second. String Type -
This parameter specifies the period of measuring delay.Interval Type 1~100
This parameter specifies the number of periods that delay adjustment suspends. Interval Type 0~100
This parameter specifies the threshold of rate down delay. Interval Type 0~10000
This parameter specifies the filter mantissa of average delay decrease. Interval Type 0~15
This parameter specifies the filter mantissa of average delay increase. Interval Type 0~15
This parameter specifies the type of link that carries the low-end VPL/VCL cross connection. Enumeration Type UNI, IMA, FRAATM, NCOPT
Length of smoothing filter window of intra-frequency load balancing (LDB). Interval Type 1~32
This parameter specifies which choice the load
balancing DRD algorithm will be applied.
- Power: Power(Downlink none-HSDPA power is
used for services carried on DCH, and downlink
HSDPA guarantee power is used for services carried
on HS-DSCH)will be applied to the load balancing
DRD algorithm.
- UserNumber: User number(Downlink R99
equivalent user number is used for services carried on
DCH, and downlink HSDPA user number is used for
services carried on HS-DSCH)will be applied to the
the load balancing DRD algorithm.
Enumeration Type UserNumber, Power
This parameter specifies the downlink load threshold to trigger load balancing DRD for services carried on DCH. The load balancing DRD will probably be triggered only when the downlink cell remanent non H power or remanent R99 equivalent user number is less than this threshold. Interval Type 0~100
This parameter specifies the downlink load threshold to trigger load balancing DRD for services carried on HS-DSCH. The load balancing DRD will probably be triggered only when the downlink cell remanent HSDPA guarantee power or remanent HSDPA user number is less than this threshold. Interval Type 0~100
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for DCH users. Only when the remanent load offset reaches this threshold can a neighboring cell be selected as a candidate DRD cell for DCH users.(If Load balance DRD choice is Power, additional condition should also be statisfied, that is total power remain difference between the current cell and target cell should be less than Load Balance DRD Total Power Protect Threshold; if Load balance DRD choice is UserNumber, additional condition is not needed.) Interval Type 0~100
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for HSDPA users. Only when the remanent load offset reaches this threshold can a neighboring cell be selected as a candidate DRD cell for HSDPA users.(If Load balance DRD choice is Power, additional condition should also be statisfied, that is total power remain difference between the current cell and target cell should be less than Load Balance DRD Total Power Protect Threshold; if Load balance DRD choice is UserNumber, additional condition is not needed.) Interval Type 0~100
This parameter specifies whether the load balancing
DRD algorithm will be applied for services carried on
DCH.
- ON: The load balancing DRD algorithm will be
applied.(If cell-level DRD parameters are configured,
the status of cell level Load balance DRD switch for
DCH should also be considered.)
- OFF: The load balancing DRD algorithm will not be
applied.
Enumeration Type ON, OFF
This parameter specifies whether the load balancing
DRD algorithm will be applied for services carried on
HS-DSCH.
- ON: The load balancing DRD algorithm will be
applied.(If cell-level DRD parameters are configured,
the status of cell level Load balance DRD switch for
HSDPA should also be considered.)
- OFF: The load balancing DRD algorithm will not be
applied.
Enumeration Type ON, OFF
This parameter specifies the threshold of the downlink remanent total power difference between the current cell and the target cell when load balancing DRD is applied and the load balancing DRD choice is Power. Only when the downlink remanent total power difference is less than this threshold can a neighboring cell be selected as a candidate DRD cell. Interval Type 0~100
Value range: NODEB_CREDIT_LDR_SWITCH
(NodeB Credit LDR Switch),
LCG_CREDIT_LDR_SWITCH (Local Cell Group
Credit LDR Switch), LC_CREDIT_LDR_SWITCH
(Local Cell Credit LDR Switch)
Content: The values above represent the following
algorithms:
NODEB_CREDIT_LDR_SWITCH: NodeB credit
congestion control algorithm. This is an RNC-oriented
algorithm. When NodeB creadit load is heavy, the
load can be reshuffled through BE service rate
reduction, renegotiation of uncontrollable real-time
service QoS, and CS/PS inter-RAT handover.
LCG_CREDIT_LDR_SWITCH: Local cell group
credit congestion control algorithm. This is an RNC-
oriented algorithm. When the local cell group creadit
load is heavy, the load can be reshuffled through BE
service rate reduction, renegotiation of uncontrollable
real-time service QoS, and CS/PS inter-RAT
handover.
LC_CREDIT_LDR_SWITCH: Local cell credit
congestion control algorithm. This is an RNC-oriented
algorithm. When the local cell creadit load is heavy,
the load can be reshuffled through BE service rate
reduction, renegotiation of uncontrollable real-time
service QoS, and CS/PS inter-RAT handover.
If NODEB_CREDIT_LDR_SWITCH,
LCG_CREDIT_LDR_SWITCH and
LC_CREDIT_LDR_SWITCH are selected, the
corresponding algorithms are enabled; otherwise,
disabled.
Recommended value:
NODEB_CREDIT_LDR_SWITCH: disabled.
LCG_CREDIT_LDR_SWITCH: disabled.
Bit Field Type NODEB_CREDIT_LDR_SWITCH(NodeB Credit LDR Switch), LCG_CREDIT_LDR_SWITCH(Local Cell Group Credit LDR Switch), LC_CREDIT_LDR_SWITCH(Local Cell Credit LDR Switch)
FALSE means not considering the code priority during the code reshuffling. TRUE means considering the code priority during the code reshuffling. If the parameter is TRUE, the codes with high priority are reserved during the code reshuffling. It is good for the code resource dynamic sharing, which is a function used for the HSDPA service. Enumeration Type FALSE(FALSE), TRUE(TRUE)
Code resource usage difference threshold. Inter-frequency handover is triggered when the difference of the resource usage of the current cell and that of the target cell is greater than this threshold. The smaller this parameter value, the easier it is to find the qualified target cell for blind handover. Excessively small values of the parameter, however makes the target cell easily enters the congestion status. The higher the parameter value, the more difficult it is for the inter-frequency blind handover occurs, and the easier it is to guarantee the stability of the target cell. Interval Type 0~100
If congestion is triggered by multiple resources such
as credit and code at the same time, the congestion of
resources specified in this parameter is processed with
the first priority.
IUBLDR refers to processing of LDR action trigged
by Iub bandwidth. CREDITLDR refers to processing
of LDR action trigged by credit. CODELDR refers to
processing of LDR action trigged by code. UULDR
refers to processing of LDR action trigged by Uu.
Enumeration Type IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit load reshuffling)
If congestion is triggered by multiple resources such
as credit and code at the same time, the congestion of
resources specified in this parameter is processed with
the fourth priority.
IUBLDR refers to processing of LDR action trigged
by Iub bandwidth. CREDITLDR refers to processing
of LDR action trigged by credit. CODELDR refers to
processing of LDR action trigged by code. UULDR
refers to processing of LDR action trigged by Uu.
Enumeration Type IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit load reshuffling)
Identifying the period of the LDR execution. When
basic congestion occurs, execution of LDR can
dynamically reduce the cell load. The lower the
parameter value is, the more frequently the LDR
action is executed, which decreases the load quickly.
If the parameter value is excessively low, an LDR
action may overlap the previous one before the
previous result is displayed in LDM. The higher the
parameter value is, the more likely this problem can
be prevented. If the parameter value is excessively
high, the LDR action may be executed rarely, failing
to lower the load timely.
The LDR algorithm aims to slowly reduce the cell
load and control the load below the admission
threshold, each LDR action takes a period (for
example the inter-RAT load handover needs a delay
of about 5 s if the compressed mode is needed), and
there is a delay for the LDM module responds to the
load decreasing (the delay is about 3 s when the L3
filter coefficient is set to 6), so the parameter value
should be higher than 8s.
Interval Type 1~86400
If congestion is triggered by multiple resources such
as credit and code at the same time, the congestion of
resources specified in this parameter is processed with
the second priority.
IUBLDR refers to processing of LDR action trigged
by Iub bandwidth. CREDITLDR refers to processing
of LDR action trigged by credit. CODELDR refers to
processing of LDR action trigged by code. UULDR
refers to processing of LDR action trigged by Uu.
Enumeration Type IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit load reshuffling)
If congestion is triggered by multiple resources such
as credit and code at the same time, the congestion of
resources specified in this parameter is processed with
the third priority.
IUBLDR refers to processing of LDR action trigged
by Iub bandwidth. CREDITLDR refers to processing
of LDR action trigged by credit. CODELDR refers to
processing of LDR action trigged by code. UULDR
refers to processing of LDR action trigged by Uu.
Enumeration Type IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit load reshuffling)
Path Load EQ threshold Table Index. Interval Type 1~63
Index of the load EQ used by the current adjacent node's bronze user. Interval Type 0~63
Index of the load EQ used by the current adjacent node's gold user. Interval Type 0~63
Index of the load EQ used by the current adjacent node's silver user. Interval Type 0~63
M3UA local entity indexes and M3UA local entity have a one-to-one correspondence. Interval Type 0~118
This parameter specifies the status of the alarm mask switch. Enumeration Type ON, OFF
This parameter specifies the priority level of an MD. Interval Type 0~7
This parameter specifies the number of the Fractional link corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa in E1 transmission mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing Fractional link is configured. Interval Type 0~31
This parameter specifies the logical function type. Enumeration Type UCP, RUCP, UUP, ATM, IP
This parameter specifies the logical function type.
UCP:UMTS RNC Control plane Process
RUCP:Resource Management and UMTS RNC
Control plane Process
UUP:UMTS RNC User plane Process Enumeration Type UCP, RUCP, UUP, ATM, IP
This parameter specifies the logic function type. Enumeration Type ATM, IP
This parameter specifies the number of the IMA group corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa, the number ranges from 0 to 83. The bearing IMA group is configured. Interval Type 0~83
DL SF threshold to limit CM. When DL SF limit CM indicator is TRUE, if the downlink spreading factor is less than or equal to this parameter value, the active set quality measurement is not allowed and CM function should be deactivated.When DL SF limit CM ind is TRUE, if CM is activated, the downlink spreading factor should be greater than this parameter value. Enumeration Type D8, D16, D32, D64, D128, D256
When the BE service rate of the UE decreases to the DCCC threshold rate, the UE, however, cannot be changed to the FACH state because, for example, the state transition switch is OFF or there are CS services. In this case, when traffic remains low for quite a long period, the service rate decreases to this rate and D2F state transition is not performed. The time parameters and traffic volume measurement parameters for the function of low activity rate adjustment are the same as those in the D2F state transition process. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the lower limit of the alarm. String Type -
This parameter specifies the coding scheme of the
line.
1. HDB3 and AMI are applicable to E1 links, and
B8ZS and AMI_ZCS are applicable to T1 links.
2. The setting of this parameter should be consistent
with that at the peer end. Enumeration Type B8ZS(B8ZS), HDB3(HDB3), AMI(AMI), AMI_ZCS(AMI_ZCS)
This parameter specifies the number of an E1/T1 link. This parameter specifies the number of a link. For the AEUa or PEUa, the value ranges from 0 to 31. For the AOUa in E1 mode, the value ranges from 0 to 125; for the AOUa in T1 mode, the value ranges from 0 to 167. For the POUa, the value ranges from 0 to 167. Interval Type 0~167
Link work mode,Reference to RFC4660. Enumeration Type M3UA_MASTER_MOD, M3UA_SLAVE_MOD
Used for MTP3 link load sharing. Suppose that the number of 1s in the value is expressed as n. Then the the maximum number of the MTP3 links for load sharing is 2^n. For example, B0000 indicates that only one MTP3 link can be used for load sharing. B0001 and B1000 indicate that at most two MTP3 links can be used for load sharing while the others cannot. This mask AND the value of Signalling Route Mask specified by ADD N7DPC must be zero. Enumeration Type B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
This parameter specifies the frame structure. The setting of this parameter should be consistent with that at the peer end. Enumeration Type E1_DOUBLE_FRAME(E1_DOUBLE_FRAME), E1_CRC4_MULTI_FRAME(E1_CRC4_MULTI_FRAME), T1_SUPER_FRAME(T1_SUPER_FRAME), T1_EXTENDED_SUPER_FRAME(T1_EXTENDED_SUPER_FRAME)
This parameter specifies the type of a VCL. Enumeration Type SAALLNK, AAL2PATH, IPOAPVC
This parameter specifies the local IP address. IP Address Type -
This parameter specifies the local IP address for the MLPPP group. IP Address Type -
This parameter specifies the source IP address of the IP loopback test. IP Address Type -
Uniquely identifying a local cell. For detailed information of this parameter, refer to 3GPP TS 25.401. Interval Type 0~268435455
First local IP address. 0 indicates an invalid value. IP Address Type -
Second local IP address. 0 indicates an invalid value. IP Address Type -
Local port of the SCTP link. Interval Type 1024~65535
This parameters specifies the load key when the board is started. Enumeration Type LFB(Load from BAM and write flash), CL(Consult Load)
This field indicate whether the SCTP link is bound with logic port. Enumeration Type NO, YES
No. of the logic port of the SCTP Link. Interval Type 0~119
Slot No. of the logic port of the SCTP link. Interval Type 14~27
This parameter specifies the antenna longitude of the GPS reference receiver. The longitude is expressed in the form of degree:minute:second. Interval Type -180000000~180000000
This parameter specifies the antenna longitude of the GPS reference receiver. The latitude is expressed in the form of degree:minute:second. String Type -
This parameter specifies the loopback type. Enumeration Type NO_LOOP(No loop), REMOTE_LOOP(Remote loop), LOCAL_LOOP(Local loop)
This parameter specifies the number of periods that packet loss rate adjustment suspends. Interval Type 0~100
This parameter specifies the number of the optical port corresponding to the low-end port. Interval Type 0~3
This parameter specifies the number of a logical port. Interval Type 0~119
This parameter specifies the number of a logical port. Interval Type 0~447
Slot No. of the IP logic port of the IP Path. Interval Type 14~27
This parameter specifies the type of the logical port. Only the logical port on the leaf node can carry the SAAL link, AAL2 path, and IPoA PVC. Enumeration Type Hub, Leaf
This parameter specifies whether to select all the E1/T1 links carried on the board or a single link. Enumeration Type ALL(Select all links), SINGLE(Select one link)
This parameter specifies whether to select all the E1/T1 links carried on a board, all the E1/T1 links carried on a port, or a single E1/T1 link. Enumeration Type ALL(Select all links), PORT(Select one port links), SINGLE(Select one link)
This parameter specifies the number of the slot in which the low-end port carries the VPL/VCL cross connection. Interval Type 14~27
This parameter specifies the number of the subrack whose low-end port carries the VPL/VCL cross connection. Interval Type 0~5
This parameter specifies the number of the UNI link corresponding to the low-end port. For the AEUa, the number ranges from 0 to 31. For the AOUa in E1 transmission mode, the number ranges from 0 to 125. For the AOUa in T1 transmission mode, the number ranges from 0 to 167. The bearing UNI link is configured. Interval Type 0~167
This parameter specifies the VCI of the low-end VCL. Interval Type 32~65535
This parameter specifies the VPI of the low-end VPL/VCL. For the VPL is cross connected, VPI cannot be 0. Interval Type 0~255
This parameter specifies the number of the M3UA service listening port. Interval Type 1024~65535
This parameter defines the times of retransmission of paging messages. If the times of retransmission exceeds the value of this parameter, retransmission stops. For details, refer to the 3GPP TS 25.331 protocol. Interval Type 0~2
This parameter specifies the DTX cycle at the MAC layer when the MAC layer supports UL EDCH inactivity. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D1, D4, D5, D8, D10, D16, D20
This parameter specifies the period during which the EDCH is not activated. After the EDCH is activated, data can be transmitted on the EDCH within the period specified by MacDtxCycle. For details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D1, D2, D4, D8, D16, D32, D64, D128, D256, D512, INFINITY
This parameter specifies the maximum size of PDUs transmitted at the MAC layer when the UE is in the CELL_FACH state in the L2 enhanced scenario. Interval Type 4~1504
This parameter specifies the maximum size of PDUs transmitted at the MAC layer when the UE is in the CELL_DCH state in the L2 enhanced scenario. Interval Type 4~1504
This parameter specifies an MA. Interval Type 0~299
SAAL, SCTP. For detailed information of this parameter, refer to 3GPP TS 25.430. Enumeration Type SAAL(SAAL Link Type ), SCTP(SCTP Link Type)
This parameter specifies the name of an MA. String Type -
Service mapping strategy switch.
1) MAP_HSUPA_TTI_2MS_SWITCH: When the
switch is on, 2 ms TTI is supported for HSUPA.
2)
MAP_INTER_RAT_PS_IN_CHANLE_LIMIT_SWI
TCH: When the switch is on, the PS services are
transmitted on the DCH during the 2G-to-3G
handover. When the switch is not on, the PS services
can be transmitted on suitable channels according to
the algorithm parameter configured for the RNC
during the 2G-to-3G handover.
3) MAP_PS_BE_ON_E_FACH_SWITCH: When the
switch is on, the PS BE services can be transmitted on
the E-FACH.
4) MAP_PS_STREAM_ON_E_FACH_SWITCH:
When the switch is on, the PS streaming services can
be transmitted on the E-FACH.
5) MAP_PS_STREAM_ON_HSDPA_SWITCH:
When the switch is on, a PS streaming service is
mapped on the HS-DSCH if the DL maximum rate of
the service is greater than or equal to the HSDPA
threshold for streaming services.
6) MAP_PS_STREAM_ON_HSUPA_SWITCH:
When the switch is on, a PS streaming service is
mapped on the E-DCH if the UL maximum rate of the
service is greater than or equal to the HSUPA
threshold for streaming services.
7)
MAP_SRB_6800_WHEN_RAB_ON_HSDSCH_SW
ITCH: When the switch is on, the signaling is
transmitted at a rate of 6.8 kbit/s if all the downlink
traffic is on the HSDPA channel.
Bit Field Type MAP_HSUPA_TTI_2MS_SWITCH, MAP_INTER_RAT_PS_IN_CHANLE_LIMIT_SWITCH, MAP_PS_BE_ON_E_FACH_SWITCH, MAP_PS_STREAM_ON_E_FACH_SWITCH, MAP_PS_STREAM_ON_HSDPA_SWITCH, MAP_PS_STREAM_ON_HSUPA_SWITCH, MAP_SRB_6800_WHEN_RAB_ON_HSDSCH_SWITCH
SRNTI mask to be reset. Enumeration Type B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, B13, B14, B15, B16, B17, B18, B19
This parameter specifies the subnet mask of the board. IP Address Type -
This parameter specifies the subnet mask for the PPP link. IP Address Type -
This parameter specifies the subnet mask for the MLPPP group. IP Address Type -
This parameter specifies the subnet mask of the Ethernet port. IP Address Type -
This parameter specifies the subnet mask of the EMS. IP Address Type -
This parameter specifies the subnet mask of a trunk group. IP Address Type -
The maximum allowed uplink transmit power of a UE in the cell, which is related to the network planning. For detailed information, refer to 3GPP TS 25.304. Interval Type -50~33
This parameter indicates whether to configure the maximum TX power. Enumeration Type TRUE(Configure the maximum uplink power of UE), FALSE(Not configure the maximum uplink power of UE)
Maximum coverage of the cell antenna.
This is controlled by MTRLGY and valid when
MET~0(metric system). Interval Type 1~100000
This parameter specifies the maximum coverage of
the cell antenna.
This is controlled by MTRLGY and valid when
IMP~1(British measurement). Interval Type 3~328080
If the number of the association retransmissions exceeds the value, the association is going to be deleted. And the maximum number of the association retransmissions must be greater than the maximum number of the path retransmissions. Interval Type 0~254
The maximum number of attempts to perform inter-
frequency handovers.
This parameter specifies the maximum number of
attempts for the RNC to perform inter-freq handover
after inter-freq handover failure. The handover
attempts should involve the cells that have not been
tried but satisfy the handover conditions.
Interval Type 0~3
This parameter specifies the maximum number of attempts for the RNC to perform inter-RAT handovers after a cell-oriented measurement-based DRD inter-RAT handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions. Interval Type 0~3
This parameter specifies the maximum bit rate of the typical service. Interval Type 0~256000000
This parameter specifies the maximum bandwidth for the dynamic bandwidth adjustment on the logical port. Interval Type 1~1000
Maximum numbers of incoming calls in one second when the load is lower than the forwarding threshold. When the CPU usage is lower than the sharing out threshold and overload threshold, and call numbers in each second reach the threshold, new arrival call attempts will be shared out to other SPU and none will be shared in this SPU. Interval Type 0~255
Maximum numbers of incoming calls in one second when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out threshold and overload threshold, and call number in one second reaches the threshold, new arrival call attempts will be shared out to other SPU and none will be shared in this SPU. Interval Type 0~255
Maximum number of retransmissions upon expiration of the connection control timer. Interval Type 4~8
This parameter specifies the maximum number of
cells in the active set. This parameter can achieve the
balance between the signal quality in the SHO area
and the performance of the system. The more cells the
active set contains, the larger macro diversity gain the
user obtains in the SHO area, and the smaller the intra-
frequency interference is. But in this case, the user
occupies resources of several cells, which increases
the amount of data to be processed by the system and
lowers the system performance.
To reduce intra-frequency interference, it is
recommended to suitably increase the number of cells
in the active sets for the hot-spot and micro cells,
which have highly complex signals. For the cell that
provides high speed services, suitably decreasing the
number of cells in the active set can reduce the
consumption of system resources.
Interval Type 1~6
Max common channel priority supported by FACH. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15
This parameter specifies the maximum value of Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y" represents the actual value and "x" represents the GUI value). Interval Type 0~49
This parameter determines the maximum number of links in the EDCH active set. When the RNC acts as the SRNC, the number of links in the EDCH active set for all the UEs under the RNC cannot exceed the parameter value. If the parameter value is too large, a lot of resources on the RAN side will be occupied as the same data is transferred over multiple EDCH links in macro diversity, thus affecting the system performance. If this parameter value is too small, insufficient combination gain can be achieved in macro diversity by the EDCH, which causes excessive retransmissions and affects the UE speed. Interval Type 1~4
This parameter specifies the maximum number of HARQ retransmissions of the MAC-es flow that carries this service. Interval Type 0~15
Maximum number of users supported by the EFACH channel. Interval Type 0~48
The offset between the FACH transmit power and PCPICH transmit power in a cell.If MaxFachPower is excessively low, the UE at the cell verge fails to receive correctly the services and signaling borne over the FACH, resulting in the influence on the downlink common channel coverage and the cell coverage. If MaxFachPower is excessively high, other channels are interfered, the downlink power resources are occupied, and consequently the cell capacity is influenced. Interval Type -350~150
Maximum Frame Length. Interval Type 135~1031
Maximum number of satellites whose ephemeris can be delivered when the A-GPS method is used. Interval Type 4~16
Maximum number of users supported by the HSDPA channel. The user in this parameter refers to the user with services on the HSDPA channel, regardless of the number of RABs carried on the HSDPA channel. Maximum HSDPA user number cannot exceed the HSDPA capability of the NodeB product, In practice, the value can be set based on the cell type and the richness of the available HSDPA power and code resources. If the value is too low, the cell HSDPA capacity may be reduces, leading to waste in HSDPA resources. If the value is too high, HSDPA services may be congested. Interval Type 0~100
Maximum number of users supported by the HSUPA channel.The user in this parameter refers to the user with services on the HSUPA channel, regardless of the number of RABs carried on the HSUPA channel. Maximum HSUPA user number cannot exceed the HSUPA capacity. Interval Type 0~100
Max allowed number of continuous invalid measurement reports. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 2~255
The parameter value must be greater than or equal to the maximum length of a sub-frame for PPP multiplexing (MAXSFLEN). This parameter can also be associated with the maximum size of the MLPPP flake to control whether the frames are fragmented after the multiplexing. In addition, to enable PPP multiplexing, two or more sub-frames should be configured. That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux max mux-frame length" (MAXMFLEN) should satisfy the following formula: MAXSFLEN<=(MAXMFLEN-8)/2. Interval Type 1~1500
This parameter specifies the maximum number of channelization codes supported by uplink DPDCH. The larger the value of this parameter, the more the available channelization codes of uplink DPDCH. Interval Type 1~6
Maximum number of retransmitted PDUs during the proving. Interval Type 0~10
If the number of the path retransmissions exceeds the value, the link is going to be deactivated automatically. And the maximum number of the path retransmissions must be less than the maximum number of the association retransmissions. Interval Type 0~254
Maximum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment, and the cell total power. When the ratio of soft handover areas keeps the same, the downlink coverage cannot be promoted by the increase of PCPICH power. Interval Type -100~500
Maximum number of data that can be transmitted during a polling period.Number of Sequenced Data PDUs (SD PDUs) that are allowed to be transmitted during the interval between two POLL messages. Interval Type 25~50,250~500
Maximum queue time of users. When a user initiates a call, it joins the queue due to cell resource insufficiency. This parameter defines the maximum length of time required for queuing of a user. If cell resources are still insufficient after expiration, access fails. Interval Type 1~60
This parameter specifies the maximum length of the PPP sub-frame. If the length of the PPP frame is greater than this parameter value, the frame cannot be used for PPP multiplexing. Note that this parameter value should not be greater than the maximum length of the PPP multiframe (MAXMFLEN). In addition, to enable PPP multiplexing, two or more sub-frames should be configured. That is, "PPP mux max son-frame length" (MAXSFLEN) and "PPP mux max mux-frame length" (MAXMFLEN) should satisfy the following formula: MAXSFLEN<=(MAXMFLEN-8)/2. Interval Type 1~1500
The parameter specifies the target value of the uplink load, which is decreased through HSUPA power control on the NodeB side. If the parameter value is set too low, the cell throughput will be too low. If the parameter value is set too high, it will bring much interference. For details about this parameter, refer to 3GPP TS 25.433. Interval Type 0~100
This parameter specifies the maximum duration for the single point positioning. Interval Type 1~24
Sum of the maximum transmit power of all DL channels in a cell. It is configured in the network planning. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 0~500
The maximum UL transmit power for background service in a specific cell. It is based on the UL coverage requirement of the background service designed by the network planning.The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the downlink coverage of the service. For detailed information of the related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331. Interval Type -50~33
Maximum UL transmit power for conversational service in a specific cell. It is based on the UL coverage requirement of the conversational service designed by the network planning.The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the downlink coverage of the service. For detailed information of the related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331. Interval Type -50~33
The maximum UL transmit power for the interactive service in a specific cell. It is based on the UL coverage requirement of the interactive service designed by the network planning.The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the downlink coverage of the service. For detailed information of the related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331. Interval Type -50~33
Maximum UL transmit power for the streaming service in a specific cell. It is based on the UL coverage requirement of the streaming service designed by the network planning.The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink coverage will probably be smaller than the downlink coverage of the service. For detailed information of the related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331. Interval Type -50~33
This parameter specifies the number of users selected in code reshuffling. Code reshuffling can be triggered only when the number of users on a code is no greater than the threshold. Code reshuffling has a big impact on the QoS. In addition, the reshuffled subscribers occupy two code resources during code reshuffling. Thus, the parameter should be set to a comparatively low value. Interval Type 1~3
Priority identifier of MBDR cells.
TRUE indicates that the MBDR cell priority is valid
in the cell-oriented measurement-based DRD
algorithm, and the cell can be considered as the
measurement object. FALSE indicates that the MBDR
cell priority is invalid. Enumeration Type FALSE(Do not send), TRUE(Send)
Priority of MBDR cells.
The priority that corresponds to the MBDR cell is
valid only when the MBDRFlag parameter is set to
TRUE. The lower the priority, the easier it is for the
MBDR cell to be delivered as the measurement
object. For example, it is more possible for a MBDR
cell of priority 1 than a cell of priority 2 to be
delivered as the measurement object.
Interval Type 0~15
This parameter specifies the index of the BFD. The check index is unique. If the check index is not specified, a unique value ranging from 0 to 31 is automatically allocated. Interval Type 0~31
This parameter specifies the local IP address of the multi-hop BFD. IP Address Type -
This parameter specifies the number of the slot where the command is executed. Interval Type 14~27
This parameter specifies the number of the subrack where the command is executed. Interval Type 0~5
Activity factor of the MBMS service. Interval Type 0~100
MBMS common channel service downlink factor. Interval Type 0~100
Indicating whether the CCH carries the MCCH. Enumeration Type COMMON, MCCH
When the priority of the RAB of MBMS services exceeds this threshold, reconfigure the MBMS power to the minimum power. The lower the parameter value is, the bigger the scope for selecting the MBMS services is, the more cell load is decreased, the more effect there is on the MBMS service. At the same time, the cell overload is significantly decreased while the impact on the MBMS services becomes bigger. The higher the parameter value is, the smaller the scope for selecting the MBMS services is, the less cell load is decreased, the more effect there is on the MBMS services, and the quality of services with high priority, however, can be guaranteed. The MBMS service at each rate is set on the basis of two power levels. The power set for an MBMS service is determined according to cell load during the service access. In addition, the FACH power of the MBMS service must be decreased as required in the duration of cell congestion. Some services with high priority, for example the disaster pre-alert, however, do not Interval Type 1~15
A timer used to alarm for no mbms data check for MBMS traffic. Interval Type 1~10
ON denotes enabling of the MBMS Iub transmission resource sharing function; OFF denotes disabling of the MBMS Iub transmission resource sharing function. Enumeration Type OFF(OFF), ON(ON)
Mobile country code of the RNC. String Type -
Mobile network code of the RNC. String Type -
It is an indicator of MBMS neighboring cell. Enumeration Type FALSE, TRUE
MBMS service release is an extreme method in
reducing the cell load and recovering the system when
the cell is overloaded and congested.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of MBMS services released in executing downlink
OLC service release.
Interval Type 0~8
Indicating whether MBMS is supported. Enumeration Type OFF, ON
This parameter specifies the uplink bit rate of the MBMS service in PTP mode. The CN does not assign the uplink rate to the MBMS service, but the MBMS service in PTP mode is in acknowledged mode and requires the uplink rate for RLC status reporting. It is a waste of uplink resources if the uplink bandwidth of an MBMS service in PTP mode is high. Therefore, it is recommended the default value be used. Enumeration Type D8, D16, D32, D64, D128, D144, D256
MBMS SA ID. For detailed information of this parameter, refer to the 3GPP 25.346. Interval Type 0~65535
MBMS Service Identity. Interval Type 0~16777215
ON denotes enabling of the MBMS function; OFF denotes disabling of the MBMS function. Enumeration Type OFF(OFF), ON(ON)
The total MBMS throughput of all the operators cannot exceed that defined in the license file. Interval Type 0~3910000
This parameter specifies the transport mode of MBMS services. The point-to-multipoint (PTM), point-to-point (PTP), and enhanced PTM (ENHANCEDPTM) modes are static or semi-static transport modes. They are relatively simple and have little impact on the MBMS service and the network performance. The dynamic mode (DYNAMIC) is complicated. In dynamic mode, transition between PTP and PTM modes is performed dynamically to balance the quality of service and the network resource utilization. The network periodically changes the transport mode based on the number of users and the status of neighboring cells. These activities have an impact on the reception of the MBMS service, and the MBMS user might experience service disruption when the user moves across the border between PTP cell and PTM cell. Therefore, the dynamic mode has a relatively great impact on the MBMS service and the network performance. For details of this parameter, refer to the 3GPP TS 25.346. Enumeration Type PTM, PTP, ENHANCEDPTM, DYNAMIC
This parameter specifies the maximum burst size. Interval Type 3~10000
Mobile country code of the RNC. String Type -
This parameter specifies the coefficient of access period of the MCCH. Interval Type 0~3
This parameter specifies the coefficient of modification period of the MCCH. Interval Type 7~10
This parameter specifies the coefficient of repetition period of the MCCH. Interval Type 0~3
This parameter specifies the priority of the MC. This parameter is valid only when "MLPPP type" is set to MCPPP. Interval Type 4,8
This parameter specifies the minimum rate of ATM traffic. Physical unit: cell/s or kbit/s. Interval Type 30~70754
This parameter specifies an MD. Interval Type 0~7
This parameter specifies the name of an MD. String Type -
Measurement quantity used in coverage-based inter-
RAT measurement in event-3A-triggered reporting
mode.
- Ec/No: signal-to-noise ratio
- RSCP: indicates the received signal code power
CPICH_Ec/No indicates that the Ec/No measurement
quantity is used for event 3A measurement. The
physical unit is dB; CPICH_RSCP indicates that the
RSCP measurement quantity is used for event 3A
measurement. The physical unit is dBm.
AUTO indicates that the EcN0 measurement quantity
is used for event 3A measurement if RNC receives the
Ec/No 2D firstly. The RSCP measurement quantity is
used for event 3A measurement if RNC receives the
RSCP 2D firstly.
Enumeration Type CPICH_EC/NO~0 CPICH_RSCP~1 AUTO
This parameter specifies an MEP in an MA. Interval Type 1~300
This parameter specifies the number of the physical slot where the local MEP in an MA resides. Interval Type 14~27
This parameter specifies the type of an MEP to be added to an MA. "LocalMep" indicates a local MEP. "RemoteMep" indicates a remote MEP. Enumeration Type LocalMep, RemoteMep
This parameter specifies the MP/MC list head option. Enumeration Type LONG, SHORT
ID of the MICH. Interval Type 0~255
TX power of the MICH. The greater the power of the MICH, the higher of the success ratio of the MBMS paging. However, more cell power resources are occupied. For details about this parameter, refer to the 3GPP 25.433. Interval Type -10~5
The value indicates whether the MICH uses time and space TX diversity. For detailed information of this parameter, refer to the 3GPP TS 25.433. Enumeration Type FALSE(Not Use), TRUE(Use)
This parameter specifies the minimum bandwidth for the dynamic bandwidth adjustment on the logical port. Interval Type 1~1000
Min common channel priority supported by FACH. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15
This parameter specifies the minimum spreading factor supported by downlink DPDCH. The larger the value of this parameter, the fewer the available spreading factors of downlink DPDCH. Enumeration Type SF4, SF8, SF16, SF32, SF64
This parameter specifies the minimum value of Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB ("y" represents the actual value and "x" represents the GUI value). Interval Type 0~49
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of AMR service is set to MIN. The DL code TX power is reported periodically after the event E1 is reported. This parameter specifies the reporting period. Interval Type 1~60
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of BE service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. Interval Type 1~60
This parameter is valid when the corresponding parameter related to the reporting period unit for the event F of BE service is set to MIN. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting period. Interval Type 1~60
DL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
Measurement report period of event E triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
This parameter specifies the HSDPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
HSDPA power requirement measurement report period For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
This parameter specifies the HSUPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
UL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
Measurement report period of event E triggered by UL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~60
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. Interval Type 1~60
This parameter specifies the minimum number of links required for an IMA group in the activated state. Interval Type 1~32
Minimum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. If MinPCPICHPower is excessively small, the cell coverage is affected. Ensure that MinPCPICHPower is set under the condition of a proper proportion of soft handover area, or under the condition that no coverage hole exists. Interval Type -100~500
This parameter specifies the minimum interval for receiving BFD packets in millisecond. Interval Type 10~1000
This parameter specifies the minimum interval for sending BFD packets in millisecond. Interval Type 10~1000
This parameter specifies the minimum spreading factor supported by uplink DPDCH. The larger the value of this parameter, the fewer the available spreading factors of uplink DPDCH. Enumeration Type SF4, SF8, SF16, SF32, SF64
Maximum number of random access preamble loops. If the parameter value is excessively low, the UE access success rate is affected. If the parameter value is excessively high, the UE probably tries the access attempt repeatedly within a long time, which increases the uplink interference. For detailed information of this parameter, refer to 3GPP TS 25.331. Interval Type 1~32
Mobile network code of the RNC. String Type -
MOCN Control Switch.1) COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH: When the switch is selected, the NRI of any CN node in the RNC is unique in the CS or PS domain.2)COMM_MIB_MULTI_PLMN_LIST_ALLOWED_SWITCH: When the switch is selected, the operator information configured in the MOCN cell is sent as Multi PLMN List in the system information. Bit Field Type COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH, COMM_MIB_MULTI_PLMN_LIST_ALLOWED_SWITCH, SPARE_1_SWITCH, SPARE_2_SWITCH, SPARE_3_SWITCH, SPARE_4_SWITCH, SPARE_5_SWITCH, SPARE_6_SWITCH
This parameter determines whether the RNC supports the MOCN function. Enumeration Type NO, YES
This parameter specifies the configuration mode. Enumeration Type OFF, ON
This parameter specifies the backup mode of the MSP function. Enumeration Type MODE1(1:1 Backup), MODE2(1+1 Single End), MODE3(1+1 Both End)
This parameter specifies the working mode of the system clock source. The system clock source can work in manual mode or in auto mode. If the parameter is set to MANUAL, you must specify the clock source for the system. If the parameter is set to AUTO, the system automatically selects the clock source against the clock switch policy. Enumeration Type MANUAL, AUTO
This parameter specifies the check mode. PRIMARY indicates the check on a primary port. STANDBY indicates the check on a standby port. INDEPENDENT indicates the check on an independent port. Enumeration Type PRIMARY, STANDBY, INDEPENDENT
Working mode of the SCTP link. Enumeration Type SERVER, CLIENT
This timer is started when an AAL2 signaling entity receives from the peer node a request for modifying the bandwidth of an AAL2 path and sends a modification indication. Interval Type 5000~30000
This timer is started when an AAL2 signaling entity sends the peer node a request for modifying an AAL2 connection. Interval Type 5000~30000
This parameter specifies a sampling period of retransmission ratio monitoring after the RLC entity is established or reconfigured. Interval Type 40~60000
Length of the period within which the times of consecutive failure to increase the rate of a BE service is monitored. Increase of the BE service rate is triggered by 4A measurement reports.IF the times exceeds the DCCC Rate Up Fail Time Threshold, the DCCC Rate Up Fail Penalty Timer will be started, and 4A report will not be processed until DCCC Rate Up Fail Penalty Timer expires. Interval Type 1~65535
This parameter specifies the MP IP address for the DHCP server. IP Address Type -
This parameter specifies the number of the MLPPP group. Interval Type 0~63
Management proving status of the SAAL link.When Management Proving Status is set to MPS_NORMAL, the SAAL sends proving PDUs in its initial alignment. When it is set to MPS_EMERGENCY, the SAAL does not send any proving PDU in its initial alignment. When it is set to MPS_NEUTRAL, the SAAL decides whether to send proving PDUs as required by users and the peer end in its initial alignment. Enumeration Type MPS_EMERGENCY, MPS_NORMAL, MPS_NEUTRAL
This parameter specifies the MLPPP type. Enumeration Type MLPPP, MCPPP
This parameter specifies the number of a slot that holds the MPU. Interval Type 0,2,4,8,10
Intra-frequency measurement reporting interval. Enumeration Type D12, D16, D20, D24, D28, D32, D64
Indicating whether to support the MR function,When it is checked, MR function will be valid, otherwise, MR function cannot be used. Enumeration Type OFF, ON
When the parameter is set to ON, MR will be started. Enumeration Type OFF, ON
MR trace traffic type set. Bit Field Type TRAFFIC_AMR, TRAFFIC_VP, TRAFFIC_BE, TRAFFIC_OTHER
This switch specifies whether to add the MSCH logical channel on the SCCPCH. When multi-MTCH logical channels are carried on one SCCPCH, an MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH. Enumeration Type OFF(OFF), ON(ON)
This parameter specifies whether to add the MSCH logical channel on the SCCPCH. When one MTCH logical channel is carried on one SCCPCH, an MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH. Enumeration Type OFF(OFF), ON(ON)
Broadcast message content. Any Type -
When the parameter value is ON,the broadcast message is valid,When OFF,the broadcast message is invalid. Enumeration Type OFF(Message is invalid), ON(Message is valid)
This parameter specifies the control command of the MSP switchover protection group. Enumeration Type CLEAR(Cleared), LOP(Lockout of Protection), FS(Forcibly switchover working link to protection link), MS(Manual switchover from working link to protection link), EXERS(Exercisely switch working link to protection link)
Maximum power limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the power of all the MTCHs are little, pre-emption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-MBMS services. Interval Type 0~100
Maximum code limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the code of all the MTCHs are few, pre-emption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-MBMS services. Interval Type 0~63
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 0. When the cell load is high, the RNC configures low power for the MBMS service so as to avoid worsening congestion in the cell and improve the setup success rate of the MBMS service. This low power, however, should cover the minimum coverage area of the MBMS service. The minimum coverage area is set to a certain percentage of the coverage area associated with the maximum transmit power of the FACH. To fulfill service differentiation, services of different priorities have different minimum coverage areas. A larger value of this parameter leads to a larger guaranteed coverage area of the MBMS service in the case of heavy load in the cell. For details of this parameter, refer to the 3GPP TS 25.346. Interval Type 0~100
This parameter specifies the minimum coverage percentage of the MTCH corresponding to the RAB priority of 15. When the cell load is high, the RNC configures low power for the MBMS service so as to avoid worsening congestion in the cell and improve the setup success rate of the MBMS service. This low power, however, should cover the minimum coverage area of the MBMS service. The minimum coverage area is set to a certain percentage of the coverage area associated with the maximum transmit power of the FACH. To fulfill service differentiation, services of different priorities have different minimum coverage areas. A larger value of this parameter leads to a larger guaranteed coverage area of the MBMS service in the case of heavy load in the cell. For details of this parameter, refer to the 3GPP TS 25.346. Interval Type 0~100
This parameter specifies the MTCH multiplexing threshold. When the rate of an MBMS service is lower than this threshold, the service, together with other services, is allocated a multiplexed S-CCPCH, whose transmission rate is set to the MTCH multiplexing threshold fixedly. Enumeration Type D16, D32, D64, D128, D256
This parameter specifies whether to apply Robust Header Compression (ROHC) on the MTCH. The value TRUE indicates to apply ROHC on the MTCH. Enumeration Type True, False
Available guarantee power of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the power of all the MTCHs are little, pre-emption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-MBMS services. Interval Type 0~100
Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the codes of all the MTCHs are few, pre-emption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-MBMS services. Interval Type 0~63
The OM interface supports localization and MET or IMP can be selected. Enumeration Type MET(Metric System), IMP(British Measurement)
This parameter specifies whether the metric system or the imperial system is used. Enumeration Type MET(MET), IMP(IMP)
This parameter specifies the maximum transmission unit. Interval Type 256~1500
This parameter specifies the maximum time elapsed before the sub-frames over the PPP link are multiplexed. Interval Type 1~1500
This parameter specifies the discriminator of the check on the local end. Interval Type 1~16
Number of proving PDUs transmitted during the proving.Reference to ITU-T Q2110. Interval Type 10~2000
Maximum number of retransmissions of the RRC CONNECTION REQUEST message. Interval Type 0~7
Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protocol default value is 3. Interval Type 0~7
Maximum number of retransmissions of UE CAPABILITY INFORMATION. Protocol default value is 2. Interval Type 0~7
Maximum number of retransmission of RRC CONNECTION RELEASE COMPLETE. Interval Type 1~8
Maximum number of successive "in sync" indications received from L1. Protocol default value is 1. Enumeration Type D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
Maximum number of successive "out of sync" indications received from L1. Protocol default value is 20. Enumeration Type D1, D2, D4, D10, D20, D50, D100, D200
Maximum number of successive "in sync" indications received from L1 when T313 is activated. Protocol default value is 1. Enumeration Type D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
Maximum number of resend times of message "RRC CONNECTION SETUP" or "CELL UPDATE CONFIRM". default value is 1. Enumeration Type D1, D2, D3, D4
Name of the MTP3RT. String Type -
Upper limit of random access back-off delay. For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. Interval Type 0~50
Lower limit of random access back-off delay. For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. Interval Type 0~50
When call shock control starts, the AMR_RRC number can be accessed per second for NodeB. Interval Type 1~200
This parameter specifies the number of the NBAP service listening port. Interval Type 1024~65535
This parameter specifies the OM address for NodeB ATM transport. IP Address Type -
This parameter specifies the OM mask for NodeB ATM transport. IP Address Type -
When call shock control starts, the register and 3G->2G reselect number can be accessed per second for NodeB. Interval Type 1~200
This parameter specifies the OM address for NodeB IP transport. IP Address Type -
This parameter specifies the OM mask for NodeB IP transport. IP Address Type -
This parameter specifies the first ESN. String Type -
This parameter specifies the second ESN. String Type -
The above values of the algorithms represent the
following information:
CRD_ADCTRL: Control NodeB Credit admission
control algorithm
Only when IUB_CONG_CAC_SWITCH which is set
by the SET CACALGOSWITCH command and this
switch are on,the NodeB Credit admission control
algorithm is valid.
HSDPA_UU_ADCTRL: Control HSDPA UU Load
admission control algorithm
HSDPA_GBP_MEAS: Control HSDPA HS-DSCH
Required Power measurement
HSDPA_PBR_MEAS: Control HSDPA HS-DSCH
Provided Bit Rate measurement
HSUPA_UU_ADCTRL: Control HSUPA UU Load
admission control algorithm
MBMS_UU_ADCTRL: Control MBMS UU Load
admission control algorithm
DOFFC: Default DPCH offset configuration
algorithm
HSUPA_PBR_MEAS: Control HSUPA Provided Bit
Rate measurement
HSUPA_EDCH_RSEPS_MEAS: Control HSUPA
Provided Received Scheduled EDCH Power Share
measurement.
EMC_UU_ADCTRL: Control power admission for
emergency user
FACH_UU_ADCTRL: Control admission for user
over FACH channels
If
CRD_ADCTRL,HSDPA_UU_ADCTRL,HSDPA_G
BP_MEAS,HSDPA_PBR_MEAS,HSUPA_UU_AD
CTRL, MBMS_UU_ADCTRL, DOFFC,
HSUPA_PBR_MEAS
Bit Field Type CRD_ADCTRL(Credit Admission Control Algorithm), HSDPA_UU_ADCTRL(HSDPA UU Load Admission Control Algorithm), HSUPA_UU_ADCTRL(HSUPA UU Load Admission Control Algorithm), MBMS_UU_ADCTRL(MBMS UU Load Admission Control Algorithm), HSDPA_GBP_MEAS(HSDPA GBP Meas Algorithm), HSDPA_PBR_MEAS(HSDPA PBR Meas Algorithm), DOFFC(DPCH Offset Configuration Algorithm), HSUPA_PBR_MEAS(HSUPA PBR Meas Algorithm), HSUPA_EDCH_RSEPS_MEAS(HSUPA EDCH RSEPS Meas Algorithm), EMC_UU_ADCTRL(emergency call power admission), FACH_UU_ADCTRL(FACH power cac switch)
The algorithms with the above values represent are as
follow:
ALGORITHM_OFF: Disable downlink call
admission control algorithm.
ALGORITHM_FIRST: The load factor prediction
algorithm will be used in downlink CAC.
ALGORITHM_SECOND: The equivalent user
number algorithm will be used in downlink CAC.
ALGORITHM_THIRD: The loose call admission
control algorithm will be used in downlink CAC.
Enumeration Type ALGORITHM_OFF, ALGORITHM_FIRST, ALGORITHM_SECOND, ALGORITHM_THIRD
The algorithms with the above values represent are as
follow:
INTRA_FREQUENCY_LDB: Intra-frequency load
balance algorithm. It is also named cell breathing
algorithm.Based on the cell load, this algorithm
changes the pilot power of the cell to control the load
between intra-frequency cells.
PUC: Potential user control algorithm. Based on the
cell load, this algorithm changes the
selection/reselection parameters of a cell to lead the
UE to a lighter loaded cell.
UL_UU_OLC: UL UU overload congestion control
algorithm. When the cell is overloaded in UL, this
algorithm reduces the cell load in UL by quick TF
restriction or UE release.
DL_UU_OLC: DL UU overload congestion control
algorithm. When the cell is overloaded in DL, this
algorithm reduces the cell load in DL by quick TF
restriction or UE release.
UL_UU_LDR: UL UU load reshuffling algorithm.
When the cell is heavily loaded in UL, this algorithm
reduces the cell load in UL by using inter-frequency
load handover, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
CS inter-RAT handover, and PS inter-RAT handover.
DL_UU_LDR: DL UU load reshuffling algorithm.
When the cell is heavily loaded in DL, this algorithm
reduces the cell load in DL by using inter-frequency
load handover, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
CS inter-RAT handover, and PS inter-RAT handover.
OLC_EVENTMEAS: Control OLC event
measurement. This algorithm starts the OLC event
measurement.
Bit Field Type INTRA_FREQUENCY_LDB(Intra Frequency LDB Algorithm), PUC(Potential User Control Algorithm), UL_UU_LDR(Uplink UU LDR Algorithm), DL_UU_LDR(Downlink UU LDR Algorithm), UL_UU_OLC(Uplink UU OLC Algorithm), DL_UU_OLC(Downlink UU OLC Algorithm), OLC_EVENTMEAS(OLC Event Meas Algorithm), CELL_CODE_LDR(Code LDR Algorithm), CELL_CREDIT_LDR(Credit LDR Algorithm)
The algorithms with the above values represent are as
follow:
NBM_LDC_ALL_UE: When inter-frequency blind
handover select user occurs, no need to consider
whether target cell support users.
NBM_LDC_MATCH_UE_ONLY: When inter-
frequency blind handover select user occurs, only
consider users supported by target cell.
NBM_LDC_MATCH_UE_FIRST: When inter-
frequency blind handover select user occurs, first
consider users supported by target cell.
Enumeration Type NBM_LDC_ALL_UE(Select all users), NBM_LDC_MATCH_UE_ONLY(Select users match target cell support only), NBM_LDC_MATCH_UE_FIRST(Select users match target cell support first)
The algorithms with the above values represent are as
follow:
ALGORITHM_REQUIRED: Always reset the mac-
hs no matter the cells in question are in the same
NodeB or not.
ALGORITHM_DEPEND_ON_LCG: Reset the mac-
hs only when the cells in question are in the different
local cell group.
Enumeration Type ALGORITHM_REQUIRED, ALGORITHM_DEPEND_ON_LCG
The algorithms with the above values represent are as
follow:
ALGORITHM_OFF: Disable uplink call admission
control algorithm.
ALGORITHM_FIRST: The load factor prediction
algorithm will be used in uplink CAC.
ALGORITHM_SECOND: The equivalent user
number algorithm will be used in uplink CAC.
ALGORITHM_THIRD: The loose call admission
control algorithm will be used in uplink CAC.
Enumeration Type ALGORITHM_OFF, ALGORITHM_FIRST, ALGORITHM_SECOND, ALGORITHM_THIRD
This parameter is used to identify WPS users with priority. For instance, if priorities 3, 4, 5, and 6 are selected, users with priorities are regarded as WPS users. Bit Field Type PRIORITY1(WPS USER PRIORITY 1), PRIORITY2(WPS USER PRIORITY 2), PRIORITY3(WPS USER PRIORITY 3), PRIORITY4(WPS USER PRIORITY 4), PRIORITY5(WPS USER PRIORITY 5), PRIORITY6(WPS USER PRIORITY 6), PRIORITY7(WPS USER PRIORITY 7), PRIORITY8(WPS USER PRIORITY 8), PRIORITY9(WPS USER PRIORITY 9), PRIORITY10(WPS USER PRIORITY 10), PRIORITY11(WPS USER PRIORITY 11), PRIORITY12(WPS USER PRIORITY 12), PRIORITY13(WPS USER PRIORITY 13), PRIORITY14(WPS USER PRIORITY 14)
WPS (Wireless Priority Service) is NS/EP (National Security/Emergency Preparedness) AMR conversation service controlled by White House of USA. NCS is authorized to manage the execution of the WPS project. This switch indicates whether the WPS function is supported. Enumeration Type ALGORITHM_OFF(WPS Algorithm Switch OFF), ALGORITHM_ON(WPS Algorithm Switch ON)
When the RRC REQ total number of one NodeB reach this threshold the RRC flow control will be triggered. Interval Type 1~200
This parameter specifies the transport type of the NodeB. ATMTRANS_IP indicates the ATM transport type, IPTRANS_IP indicates the IP transport type, and ATMANDIPTRANS_IP indicates the ATM and IP transport types. Enumeration Type ATMTRANS_IP, IPTRANS_IP, ATMANDIPTRANS_IP
Uniquely identifying the different network in the neighboring area. Interval Type 0~7
Uniquely identifying a neighboring cell. Interval Type 0~65535
The cell will shut down automatically only when the neighboring cell load is less than the difference between the LDR threshold and this threshold. Interval Type 0~100
ID of the RNC controlling a neighboring cell.
Uniquely identifying an RNC.
Interval Type 0~4095
Indicating the network control mode. Enumeration Type NC0, NC1, NC2, RESET
When the number of UEs responding to counting/recounting is greater than or equal to this threshold, the PTM mode is applied to data transmission. Otherwise, the PTP mode is used. Note that the number of UEs includes the number of connected mode UEs. A larger value of this parameter leads to a higher probability of using PTP transmission on the network. Power control is available for PTP transmission, and thus the power consumption in PTP mode is lower than that in PTM mode. In PTP mode, however, the quantities of code, CE, and other transmission resources increase with the number of users. Therefore, the setting of this parameter should take into consideration various resources, especially bottleneck resources of operators. The value of this parameter should not be too large. Interval Type 2~10
When this parameter is set to ON, and when the load of the GSM cell exceeds the related threshold, the RNC will stop the non-coverage based inter-RAT handover; when this parameter is set to OFF, the RNC will do reversely. This parameter determines whether to stop the non-coverage based handover from the UMTS network to the GSM network according to the load information of the GSM cell. When the GSM network can provide its load information to the UMTS network, the RNC determines whether to send the non-coverage based handover to the GSM cell according to the load information of the GSM cell and the load threshold of the GSM cell set in the UMTS cell. This parameter is invalid for the GSM network that cannot provide its load information to the UMTS network. Enumeration Type OFF, ON
Maximum number of non-HCS cell reselection. This parameter, along with Tcrmaxnonhcs, defines the speed estimation threshold of non-HCS cells. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type 1~16
Indicating whether the DSP and the OSP are connected directly or indirectly. Enumeration Type NO(NO_DIRECT_CONNECT), YES(DIRECT_CONNECT)
This parameter specifies the IP address of the next hop.IP Address Type -
This parameter specifies the IP address of the next hop.IP Address Type -
Threshold for deciding that the UE is in high-
mobility state.
This parameter specifies a threshold for high-speed
decision. After the UE reports event 1D, the UE is
considered in high-mobility state if the number of
changes of the best cell during [TFASTSPDEST] is
larger than [NFASTSPDEST]. The smaller the value
is, the more possibly the UE is decided in high-
mobility state.
Interval Type 1~16
Network Indicator. INT(international network), INTB(international reserved), NAT(national network), NATB(national reserved). Enumeration Type INT, INTB, NAT, NATB
This parameter defines the of successive in-sync indications required for the NodeB to trigger the radio link recovery process.The radio link set remains in the initial state until it has received a certain number (the number is defined by NInsyncInd) of successive in-sync indications from L1, and then the NodeB triggers the radio link recovery process, which indicates that the radio link set has been synchronized. Once the radio link recovery process is triggered, the radio link set is considered to be in the synchronized state. The higher the value is, the stricter the synchronization process becomes, and the more difficult the synchronization occurs. The lower the value is, the easier the synchronization occurs. If the link quality is poor, a simple synchronization requirement leads to waste of the UE power and increase of uplink interference. In the radio link maintenance process, NInsyncInd is used together with the successive out-of-sync indication counter. Interval Type 1~256
This parameter should be set according to the actual network situation . If there is the Gs interface between SGSN and MSC/VLR this parameter is set as MODE1; otherwise, MODE2. It is valid only when [CN domain ID] is set as PS_DOMAIN. Enumeration Type MODE1, MODE2
This parameter specifies the value of the NAS Node Selection Function (NNSF) timer for CS traffic paging. For the IMSI paging of the UE in CS connection mode, on receiving the IMSI paging with the first Global CN ID, the RNC stores the Global CN ID and starts the NNSF protection timer. Once the UE responds to the IMSI paging, the RNC stops the NNSF protection timer. Interval Type 0~60
This parameter specifies the number of the cabinet where the NodeB is installed. Interval Type 0
Maximum number of HSDPA users of the NodeB. If the HSDPA user access is rejected by the NodeB, you can infer that the HSDPA licenses are insufficient. New HSDPA licenses are required. Interval Type 0~3840
Maximum number of HSUPA users of the NodeB. If the HSUPA user access is rejected by the NodeB, you can infer that the HSUPA licenses are insufficient. New HSUPA licenses are required. Interval Type 0~3840
NodeB ID. Interval Type 0~65535
This parameter specifies the number of an IMA group of the NodeB. Interval Type 0~3
IUB_LDR (Iub congestion control algorithm): When
the NodeB Iub load is heavy, users are assembled in
priority order among all the NodeBs and some users
are selected for LDR action (such as BE service rate
reduction) in order to reduce the NodeB Iub load.
NODEB_CREDIT_LDR (NodeB level credit
congestion control algorithm): When the NodeB level
credit load is heavy, users are assembled in priority
order among all the NodeBs and some users are
selected for LDR action in order to reduce the NodeB
level credit load.
LCG_CREDIT_LDR (Cell group level credit
congestion control algorithm): When the cell group
level credit load is heavy, users are assembled in
priority order among all the NodeBs and some users
are selected for LDR action in order to reduce the cell
group level credit load.
IUB_OLC (Iub Overload congestion control
algorithm): When the NodeB Iub load is Overload,
users are assembled in priority order among all the
NodeBs and some users are selected for Olc action in
order to reduce the NodeB Iub load.
To enable some of the algorithms above, select them.
Otherwise, they are disabled.
Bit Field Type IUB_LDR(IUB LDR Algorithm), NODEB_CREDIT_LDR(NodeB Credit LDR Algorithm), LCG_CREDIT_LDR(LCG Credit LDR Algorithm), IUB_OLC(IUB OLC Algorithm)
Name of the NodeB. String Type -
Protocol version of the NodeB. Enumeration Type R99, R4, R5, R6, R7
This parameter specifies the period of reporting the NodeB bandwidth, in minutes. Interval Type 1~60
This parameter specifies the type of reporting the NodeB bandwidth. "PERIOD" indicates the periodical report type. "EVENT" indicates the event-based report type, for example, the report triggered by bandwidth change. Enumeration Type PERIOD, EVENT
This parameter specifies the number of the slot where the port of the NodeB is located. Interval Type 0~1,12~15,22~23
This parameter specifies the number of the subrack where the NodeB is installed. Interval Type 0~2
This parameter specifies the type of a sub-board of the NodeB. Enumeration Type BASE_BOARD, CH_STM1, E1
Indicating the type of the NodeB. Enumeration Type NORMAL(Normal), PICO_TYPE1(Pico type 1), PICO_TYPE2(Pico type 2)
Period of node synchronization. Interval Type 1~288
Measurement start time (HH:MM:SS). Compound Type hour, min, sec
UNI_AAL2SWITCH is the adjacent node of the ATM switch on the Iub interface. NNI_AAL2SWITCH is the adjacent node of the ATM switch on the Iur or Iu-CS interface. Enumeration Type IUB, IUR, IUCS, IUPS, UNI_AAL2SWITCH, NNI_AAL2SWITCH
This parameter specifies the small-scaled base station type. Enumeration Type PICO_TYPE1, PICO_TYPE2
Indicating whether the non-HCS speed estimation parameter should be configured. Enumeration Type CONFIGURED, NOT_CONFIGURED
This parameter specifies the ratio of the non-serving E-DCH RX power to the total E-DCH RX power. The parameter indicates whether a non-serving NodeB sends the relative grant (RG) message to the UE. If the parameter value is set too low, the power of the non-serving radio link will be low and the data rate on non-serving E-DCH will be reduced, thus impacting the transport rate of the UE in soft handover state. If the parameter value is too high, the non-serving RL cannot send RG to the UE even in overloaded situation. For details about this parameter, refer to 3GPP TS 25.433. Interval Type 0~100
This parameter defines the of successive in-sync indications required for starting the radio link failure timer. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-of-sync indications of the number defined by NOutsyncInd.The NodeB shall stop and reset the timer after receiving successive in-sync indications of the number defined by NInsyncInd.When the timer expires, the NodeB triggers the radio link failure process, and indicates which radio link set is out-of-sync. If the value is excessively high, the link out-of-sync decision is likely to happen. If the value is excessively low, out-of-sync is not likely to happen. But if the link quality is poor, it may result in a waste of the UE power and increased uplink interference. Interval Type 1~256
Priority of neighboring cells.
The priority that corresponds to the neighboring cell is
valid only when the this parameter is set to TRUE.
The lower the priority, the easier it is for the
neighboring cell to be delivered as the measurement
object. For example, it is more possible for a
neighboring cell of priority 1 than a cell of priority 2
to be delivered as the measurement object.
Interval Type 0~63
Priority of neighboring cells.
The priority that corresponds to the neighboring cell is
valid only when the this parameter is set to TRUE.
The lower the priority, the easier it is for the
neighboring cell to be delivered as the measurement
object. For example, it is more possible for a
neighboring cell of priority 1 than a cell of priority 2
to be delivered as the measurement object.
Interval Type 0~30
Priority identifier of neighboring cells.
TRUE indicates that the neighboring cell priority is
valid in the algorithm of neighboring cell
combination. FALSE indicates that the neighboring
cell priority is invalid, and, in the algorithm of
neighboring cell combination, the cell with invalid
priority is the last one to be considered as the
measurement object.
Enumeration Type FALSE, TRUE
This parameter specifies the NPTP-PTM offset.
During recounting in PTP mode, if the number of PTP
users is larger than or equal to NPTP-PTM, the
transmission mode transits to PTM. The value of
NPTP-PTM = [PARA]NcountingThd[/PARA] +
[PARA]NPtpToPtmOffset[/PARA].
The transition between PTP and PTM affects user
experience. Thus, to minimize ping-pong effect, the
transition between PTP and PTM uses a threshold
other than [PARA]NcountingThd[/PARA]. The two
thresholds are used only to avoid ping-pong effect, so
the difference between the two should not be too
large. Because the value of
[PARA]NcountingThd[/PARA] is small, it is
recommended that the default value of this parameter
be used.
Interval Type 1~5
Identifying a Network resourse .
1. The NRI numbers of CS domain and PS domain are
independent from each other.
2. If multiple pool areas overlap, the NRI uniquely
identify all the CN nodes connected to it.
3. A CN node can have multiple NRIs. In one pool
area, however, an NRI can only correspond to one CN
node.
Interval Type 0~1023
Neighboring RNC ID. Interval Type 0~4095
Source ATM address. It should be input in
hexadecimal format with prefix of "H'".
1.The first byte of it is recommended to started with
H'45 (indicating E.164 address), H'39 (indicating
DCC address) or H'47 (indicating ICD address).
When it is started with "H'45", the following seven
and a half octets must be BCD code, called E.164e
when the last part DSP is full of zero, such as
0x45000971500202001F0000000000000000000000,
while called E.164A when the last part DSP is not full
of zero. H'45 is recommended.
2.It should be allocated in the ATM network and
cannot be repeated.
Any Type -
Destination ATM address of the AAL2 route. It must
be input in hexadecimal format within 2 and 21 bytes
including the prefix H'(H'is 1 byte). It is
recommended that the first byte is H'45 (indicating an
E.164 address), H'39 (indicating a DCC address), or
H'47 (indicating an ICD address).
If the first byte is H'45, then the following seven and a
half bytes (that is, 15 digits) must be a BCD code. If
the following part, called DSP, are all zeros, this
address is called E.164e, for example,
0x4500097150020200100000000000000000000000.
If the DSP are not all zeros, this address is called
E.164A. The ATM address is assigned in the ATM
network and must be unique. It is recommended to use
H'45 format.
Any Type -
Threshold for deciding whether the UE in low-
mobility state.
After the slow speed timer times out, the UE is
considered in low-mobility state if the number of
changes of the best cell caused by the UE reporting of
event 1D during [TSLOWSPDEST] is smaller than
[NSLOWSPDEST]. The larger the value is, the more
possibly the UE is decided in low-mobility state.
Interval Type 1~16
NullNRI VALUE indicate that ue assign load other CN node ,when NNSF select CN node. Interval Type 0~1023
Specifies the number of access classes that are restricted at a time according to the flexible polling restriction mode. Interval Type 1~16
This parameter specifies the minimum OAM flow bandwidth. Interval Type 0~100
This parameter specifies the DSCP value of the OAM flow. The data of the OAM flow enters a dedicated queue for transmission rather than queues 1 to 6. Interval Type 0~63
This parameter specifies the minimum OAM flow bandwidth switch. Enumeration Type OFF, ON
Offset of Qoffset1 when neighboring cell load is heavier than that of the center cell (Note: Qoffset1 is used as a priority to decide which cell will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -20~20
Offset of Qoffset1 when neighboring cell load is lighter than that of the center cell (Note: Qoffset1 is used as a priority to decide which cell will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -20~20
Offset of Qoffset2 when neighboring cell load is heavier than that of the center cell (Note: Qoffset2 is used as a priority to decide which cell will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -20~20
Offset of Qoffset2 when neighboring cell load is lighter than that of the center cell (Note: Qoffset2 is used as a priority to decide which cell will be selected in cell selection or reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -20~20
Offset of Sintersearch when center cell load level is "Heavy" (Note: Sintersearch is used to decide whether to start the inter-frequency cell reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -10~10
Offset of Sintersearch when center cell load level is "Light" (Note: Sintersearch is used to decide whether to start the inter-frequency cell reselection). For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -10~10
Identifying the period of the OLC execution. When
overload occurs, execution of OLC can dynamically
reduce the cell load. When setting the parameter,
consider the hysteresis for which the load monitoring
responds to the load change. For example, when the
layer 3 filter coefficient is 6, the hysteresis for which
the load measurement responds to the step-function
signals is about 2.8s, namely that the system can trace
the load control effect about 3 s later after each load
control. In this case, the OLC period timer length
cannot be smaller than 3s.
OlcPeriodTimerLen along with
ULOLCFTFRstrctUserNum,
DLOLCFTFRstrctUserNum,
ULOLCFTFRSTRCTTimes,
DLOLCFTFRSTRCTTimes,
ULOLCTraffRelUserNum, and
DLOLCTraffRelUserNum determine the time it takes
to release the uplink/downlink overload. If the OLC
period is excessively long, the system may respond
very slowly to overload. If the OLC period is
excessively short, unnecessary adjustment may occur
before the previous OLC action has taken effect, and
therefore the system performance is affected.
Interval Type 100~86400000
Identity Operator Type,as follows:
Primary Operator: Control whether the RAN support
some funtion feature and distribute seconder
operator's license.
Second Operator: the RAN that is controled by
primary operator support some funtion feature and
license.
Outer Operator: Operator which don't include the
Primary , Second operator of the source rnc handover
the target RNC to support the mobiling .
Common Operator: Common Operator indicate
PLMN ID the subscribe select as the same as the
tradition network do in the sharing network. It is also
the Serving operator.
Enumeration Type PRIM(Primary Operator), SEC(Secondary Operator), OUTER(Outer Operator), COMM(Common Operator)
This parameter specifies the type of transport channel at the peer end for the typical RAB. For CS services, this parameter must be set to TRCH_DCH. Enumeration Type TRCH_DCH, TRCH_HSDSCH
This parameter specifies the map mode between the optical port and the DS1. Enumeration Type MAP_MODE_LUCENT, MAP_MODE_HUAWEI, MAP_MODE_ALCATEL
This parameter specifies whether the IE is reported to the CN. Bit Field Type R5_PosData_SWITCH, Last_Known_Service_Area_SWITCH
This parameter specifies the type of the optical port. Enumeration Type SDH, SONET
Azimuth of the semi-major axis of an uncertain area in the cell center (the anticlockwise angle from the semi-major axis to the north). Interval Type 0~179
This parameter specifies the operation type of this command. One_touch indicates that this command is executed on all boards in all subracks. Step_by_Step indicates that this command is executed on the specified patch of a board. Enumeration Type One_touch(For all the subracks and boards), Step_by_Step(Choose step by step)
Flag of OTDOA location activation. Enumeration Type INACTIVE, ACTIVE
UE positioning mode when the OTDOA method is selected. The UE supports both UE-based OTDOA mode and UE-assisted OTDOA mode. Enumeration Type UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_ASSISTED_PREFERRED
Mobility flag of the overlay network.
This flag is valid when the OVERLAY switch is set to
ON. When the flag is set to NOT_FORBIDDEN, this
means that, when using the H service, the UE can
deliver the intra-frequency measurement and
handover to the DRNC cell, which can be used as the
target cell of inter-frequency handover. When the flag
is set to FORBIDDEN, this means that, when using
the H service, the UE cannot deliver the intra-
frequency measurement and handover to the
neighboring cell, which cannot be used as the target
cell of inter-frequency handover.
Note that the H+CS combined service is considered as
the CS service.
Enumeration Type FORBIDDEN, NOT_FORBIDDEN
Ownership of the AAL2 Path. Enumeration Type PEER, LOCAL
Indicating whether the destination ATM address is the adjacent node specified by [ANI]. If the two nodes are the same, set this parameter to YES. If they are different, set this parameter to NO. Enumeration Type NO(ATM_ADDRESS_DOES_NOT_BELONG_TO_THIS_ADJACENT_NODE), YES(ATM_ADDRESS_BELONGS_TO_THIS_ADJACENT_NODE)
For IUPS Path,this parameter must be ENABLED.Other Paths have default value DISABLED.If this parameter is set to ENABLED,then [Check IP address] must be specified. Enumeration Type ENABLED, DISABLED
Identifying an AAL2 path between two AAL2 nodes. For the same AAL2 path, the path IDs configured in the two AAL2 nodes must be the same and cannot be 0. Interval Type 1~4294967295
Identifying an IP path. Interval Type 0~65535
Type of the IP path. Enumeration Type QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQ_QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF
This parameter specifies the type of patch to be loaded to the DPUb board. Enumeration Type NP, DSP
Offset of the PCH transmit power from the PCPICH transmit power in a cell. If the value is set too small, the UEs on the cell edge cannot receive the paging message properly. This problem affects the coverage of the downlink common channel and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type -350~150
TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. For the cells to be covered, the downlink coverage should be guaranteed as a premise. For the cells requiring soft handover area, this parameter should satisfy the proportion of soft handover areas stipulated in the network planning. If the maximum transmit power of the PCPICH is configured too large, the cell capacity will be decreased because a lot of system resources will be occupied and the interference with the downlink traffic channels will be increased. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type -100~500
Pilot power adjustment step increased or decreased in each increase of the cell breathing algorithm or decrease of cell pilot. If the value is too great, the cell pilot may change fiercely, which is easy to lead to user call drops. If the value is too small, the cell pilot may change smoothly. However, the response speed of the cell breathing algorithm is decreased, impacting the algorithm performance. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 0~100
This parameter specifies the peak rate. 1. Physical
unit: cell/s or kbit/s
2. The peak rate cannot exceed the maximum
bandwidth of the bearer such as the IMA group, UNI
link, or optical port.
3. The peak rates for different types of services are as
follows: CBR: 71 to 353207 (UT = CELL/S)/30 -
149759 (UT = KBIT/S); RTVBR/NRTVBR/UBR: 71
to 70754 (UT = CELL/S)/30 - 30000 (UT = KBIT/S).
Interval Type 30~353207
Power control switch.
1)
PC_AMR_MODE_INDUCE_BLER_ALTER_SWIT
CH: When the switch is on, the target BLER value of
the AMR speech service is the target BLER value of
each mode in the AMRC parameter table. When the
switch is not on, the target BLER value of the AMR
speech service is the target BLER value specified in
TYPRAB.
2) PC_DL_INNER_LOOP_PC_ACTIVE_SWITCH:
When the switch is on, the status of inner loop DL
power control is set to "Active." When the switch is
not on, the status is set to "Inactive."
3)
PC_DOWNLINK_POWER_BALANCE_SWITCH:
When the switch is on, the RNC supports DL power
balancing. During soft handover, TPC bit errors may
cause DL power drift. DL power balancing is enabled
to balance the DL power between links, thus
achieving the optimal gain of soft handover.
4) PC_EFACH_ECN0_DYN_ADJ_SWITCH: When
the switch is on, the target value of Ec/N0 can be
dynamically reconfigured on the E-FACH. When the
switch is disabled, the minimum value of Ec/N0 is
directly configured for the NodeB.
5) PC_FP_MULTI_RLS_IND_SWITCH: When the
switch is on, the RNC informs the NodeB of the
current RLS number through the FP inband signaling.
6)
PC_HSUPA_HARQNUM_AUTO_ADJUST_SWIT
CH: When the switch is on, the HSUPA service can
use the smaller target number of retransmissions when
the uplink is not congested. If the uplink is congested,
the HSUPA service can use the typical target number
Bit Field Type PC_AMR_MODE_INDUCE_BLER_ALTER_SWITCH, PC_DL_INNER_LOOP_PC_ACTIVE_SWITCH, PC_DOWNLINK_POWER_BALANCE_SWITCH, PC_EFACH_ECN0_DYN_ADJ_SWITCH, PC_FP_MULTI_RLS_IND_SWITCH, PC_HSUPA_HARQNUM_AUTO_ADJUST_SWITCH, PC_HSUPA_PO_UPDATE_SWITCH, PC_INNER_LOOP_LMTED_PWR_INC_SWITCH, PC_OLPC_SWITCH, PC_RL_RECFG_SIR_TARGET_CARRY_SWITCH, PC_SIG_DCH_OLPC_SWITCH, PC_UL_SIRERR_HIGH_REL_UE_SWITCH
PENDING time length of M3UA link set. Interval Type 1~10
This parameter specifies the period of sending EthOAM PDU packets. Enumeration Type 10, 20, 50, 100, 200, 500, 1000
This parameter specifies the length of an EthOAM
PDU packet.
Interval Type 64~1024
Indicating the corresponding peer cell ID of the cell in a RNCPOOL in RNC Node Redundancy function. Interval Type 0~65535
This parameter specifies the peer IP address. IP Address Type -
This parameter specifies the peer IP address for the MLPPP group. IP Address Type -
This parameter specifies the destination IP address of the IP loopback test. IP Address Type -
First destination IP address. 0 indicates an invalid value. IP Address Type -
Second destination IP address. 0 indicates an invalid value. IP Address Type -
This parameter specifies the peer IP address. IP Address Type -
Peer IP address. This parameter cannot be equal to the local IP address configured in the RNC. IP Address Type -
Indicating peer cell is valid or not. Enumeration Type INVALID(Invalid), VALID(Valid)
Peer subnet mask. IP Address Type -
This parameter specifies the NodeB ID configured in another RNC of the RNC POOL. In RNC Node Redundancy function, the two RNCs form an RNC POOL and the same physical NodeB is configured in both RNCs. Interval Type 0~65535
Destination port of the SCTP link. Interval Type 1024~65535
This parameter specifies the RNC ID of the peer RNC in the RNC POOL. Interval Type 0~4095
This parameter specifies the peer type of IPoA PVC. Enumeration Type IUB, IUPS, OTHER
The length of the penalty timer of Inter-Rat handover
failure due to physical channel failure.
No try of Inter-Rat handover will be taken until
penalty finishes.
Also see parameter InterRatPhyChFailNum.
Interval Type 0~65535
Strech for penalty of inter-RAT handover failure. No try of inter-RAT handover to the penalty cell will be taken until penalty finishes. Interval Type 0~300
This parameter specifies the pending-time-after-trigger for traffic-related event 4A on DCH. The traffic-related event 4A on DCH is not reported again during the time defined by this parameter after such an event is reported. This parameter is set to avoid too many channel reconfiguration operations. The larger the value of this parameter, the longer the time from the last reporting of traffic-related event 4A on DCH to the next reporting, and the smaller the possibility of triggering traffic-related event 4A on DCH. Enumeration Type D250, D500, D1000, D2000, D4000, D8000, D16000
This parameter specifies the pending-time-after-trigger for traffic-related event 4B on DCH. The traffic-related event 4B on DCH is not reported again during the time defined by this parameter after such an event is reported. This parameter is set to avoid too many channel reconfiguration operations. The larger the value of this parameter, the longer the time from the last reporting of traffic-related event 4B on DCH to the next reporting, and the smaller the possibility of triggering traffic-related event 4B on DCH. Enumeration Type D250, D500, D1000, D2000, D4000, D8000, D16000
This parameter specifies the number of pending periods after event A is triggered. During the pending time, no event related to retransmission ratio is reported. Interval Type 0~1000
This parameter specifies the number of pending periods after event B is triggered. During the pending time, no event related to retransmission ratio is reported. Interval Type 0~1000
IP Path Ping Period. Interval Type 1~60
2B event retry period.
This parameter defines the length of the event 2B
retry period. The smaller the value of this parameter,
the more frequent the handover retry due to inter-
frequency handover failure, and the faster the UE to
be successfully handed over to the target cell whose
load is restored, thus lowering the probability of call
drops. In this case, however, frequent handover retry
brings more load to the RNC system.
Interval Type 1~64
Retry period for the event 2C.
This parameter defines the length of the event 2C
retry period.
The smaller the value of this parameter, the more
frequent the handover retry due to inter-frequency
handover failure, and the faster the UE to be
successfully handed over to the target cell whose load
is restored. In this case, however, frequent handover
retry brings more load to the RNC system.
Interval Type 1~64
Retry period for the event 3A.
This parameter defines the length of the event 3A
retry period. The smaller the value of this parameter,
the more frequent the handover retry due to inter-RAT
handover failure, and the faster the UE to be
successfully handed over to the target cell whose load
is restored, thus lowering the probability of call drops.
In this case, however, frequent handover retry brings
more load to the RNC system.
Interval Type 1~64
Retry period for the event 3C.
This parameter defines the length of the event 3C
retry period. The smaller the value of this parameter,
the more frequent the handover retry due to inter-RAT
handover failure, and the faster the UE to be
successfully handed over to the target cell whose load
is restored, thus lowering the probability of call drops.
In this case, however, frequent handover retry brings
more load to the RNC system.
Interval Type 1~64
This parameter specifies the number of reporting times of event 1A for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. Enumeration Type D1, D2, D4, D8, D16, D32, D64, INFINITY
This parameter specifies the number of reporting times of event 1C for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. Enumeration Type D1, D2, D4, D8, D16, D32, D64, INFINITY
This parameter specifies the number of reporting times of event 1J for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. Enumeration Type D1, D2, D4, D8, D16, D32, D64, INFINITY
Period common measurement protection timer coefficient. Timer length of common measurement report protection = max (10000, this parameter x common measurement report period). The unit is ms. The common measurement report protection timer indicates the maximum length between two valid common measurement reports. If the real time exceeds the timer length of common measurement report protection, the common measurement is faulty and a new one is set up. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 2~65535
It is used to calculate the corresponding dynamic persist scaling factor for ASC2~ASC7. It is valid for ASC2-ASC7 only and mandatory. For detailed information of this parameter, refer to 3GPP TS 25.214. Enumeration Type D0.9, D0.8, D0.7, D0.6, D0.5, D0.4, D0.3, D0.2
This parameter specifies whether to enable the protocol field compression switch for the PPP link. Enumeration Type Disable, Enable
This parameter specifies the PHB to be activated with the IP PM. Bit Field Type BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), EF(EF)
PHB value. Enumeration Type BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
Uniquely identifying a common physical channel in a cell. Interval Type 0~255
ID of the physical channel carrying the MCCH. Interval Type 1~255
Uniquely identifying a PICH in a cell. Interval Type 0~255
Indicating the number of PIs contained in each frame of the PICH For detailed information of this parameter, refer to 3GPP TS 25.211. Enumeration Type V18, V36, V72, V144
Difference between the transmit power of PICH and that of PCPICH. If the value is set too small, the UEs on the cell edge cannot receive the paging indication properly. This problem may cause a misoperation of reading the PCH, waste the battery of the UE, affect the coverage of the downlink common channel, and finally affect the cell coverage. If the value is too great, it causes interference to other channels, occupies the downlink transmit power, and affects the cell capacity. For details, refer to the 3GPP TS 25.433 protocol. Interval Type -10~5
This parameter specifies the number of the slot that holds the PIU. Interval Type 14~27
This parameter specifies the number of packets for starting the EthOAM loopback test. Interval Type 5~64
This parameter specifies the length of packet for starting the EthOAM loopback test. Interval Type 64~1024
This parameter specifies the maximum length of a loopback packet. Interval Type 10~1500
This parameter specifies the size of the ping packets. Interval Type 20~1024
This parameter specifies the size of a sent packet. Interval Type 95~512
Maximum PLMN tag value corresponding to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 25.331. Interval Type 1~256
Minimum PLMN tag value corresponding to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 25.331. Interval Type 1~256
This parameter specifies the period of measuring the packet loss rate. Interval Type 1~100
This parameter specifies the threshold of discarding packets. Interval Type 0~1000
This parameter specifies the interval for sending IP PM packets. Interval Type 1~100
This parameter specifies the number of an Ethernet port. Interval Type 0~7
This parameter specifies the number of a port. Interval Type 0,2,4,6,8
For the FG2a board, the port number ranges from 0 to 7. For the GOUa board, the port number ranges from 0 to 1. Interval Type 0~7
This parameter specifies the number of the physical port where the local MEP in the current MA resides. Interval Type 0~7
This parameter specifies the number of a port. Interval Type 0~7
This parameter specifies the number of an Ethernet port. Interval Type 0~7
This parameter specifies the number of a port. Interval Type 1~32
This parameter specifies the description of the rollback point. String Type -
This parameter specifies the name of the rollback point.String Type -
Timer length of the queue poll. The queue is polled for every time specified in this parameter. During each poll, all the expired users are removed from the queue and this user fails in access. Among all the unexpired users, resources are allocated in the order of high priority to low priority. If resource allocation is successful, the user succeeds in access and traverse of this queue is stopped. Otherwise, the rest users are traversed until all the unexpired users go through this. Interval Type 1~80
Interval for sending POLL message.It generally indicates the duration of a message arrives at the peer end and returns. Interval Type 50~10000
This parameter specifies the port provided the FTP server to be accessed by the FTP client. Interval Type 21~65535
This parameter specifies the protocol type of the port. Enumeration Type IP, ATM
This parameter specifies the type of the physical port where the local MEP in an MA resides. "FE" indicates an FE port. "TRUNK" indicates a Trunk group. Enumeration Type ETHER, TRUNK
This parameter specifies the switch for relay 1. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the switch for relay 2. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the switch for relay 3. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the switch for relay 4. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the switch for relay 5. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the switch for relay 6. Enumeration Type CLOSE(Close), OPEN(Open)
The power offset between the last access preamble and the message control part. The power of the message control part can be obtained by adding the offset to the access preamble power. If the value is excessively low, the uplink interference may increase, and the uplink capacity may be affected. If the value is set too high, coverage may be affected. For detailed information of this parameter, refer to 3GPP TS 25.213. Interval Type -5~10
The power increase step of the random access preambles transmitted before the UE receives the acquisition indicator in the random access process. If the value of Power increase step is too large, the access procedure will be shortened, but it is more likely to cause power waste. If it is too small, the access procedure will be lengthened, but transmit power will be saved. This parameter must be set carefully. In addition, the higher the parameter value is, the smaller impact ConstantValue has on the network performance. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 1~8
This parameter specifies the PPP port IP address for the DHCP server. IP Address Type -
This parameter specifies the number of a PPP link. Interval Type 0~3
This parameter specifies the number of a PPP link. Interval Type 0~167
If this parameter is set to Enable, the frame multiplexing over the PPP link is enabled. If this parameter is set to Disable, the frame multiplexing over the PPP link is disabled. Enumeration Type Disable, Enable
This parameter is valid only when the port flow control type is IP. The "PQNUM" of an ATM queue is "2" by default. You cannot change the default value. Interval Type 0~5
Uniquely identifying a PRACH in a cell corresponding to the AICH. Interval Type 0~255
Inter-frequency measurement reporting interval.
In periodical report mode, the interval between two
reports is the configured value. However, it is not
recommended that the value
"NON_PERIODIC_REPORT" be set, upon which the
UE behaviour is not defined.
This parameter has impact on the Uu signaling flow.
If the interval is too short and the frequency is too
high, the RNC may have burden in processing
signaling. If the interval is too long, the network
cannot detect the signal change in time, which may
delay the inter-frequency handover and thus cause call
drops.
Enumeration Type NON_PERIODIC_REPORT(Non periodical reporting), D250~1 D500~2 D1000~3 D2000~4 D3000~5 D4000~6 D6000~7 D8000~8 D12000~9 D16000~10 D20000~11 D24000~12 D28000~13 D32000~14 D64000
The maximum number of preambles transmitted in a preamble ramping cycle. If the value of Max preamble retransmission is too small, the preamble power may fail to ramp to the required value. This may result in UE access failure. If it is too large, the UE will repeatedly increase the power and make access attempts, which may result in interference to other UEs. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 1~64
Sequence No. of an available preamble signature. A maximum of 16 signatures (from signature 0 to 15) can be selected. For detailed information of this parameter, refer to 3GPP TS 25.213. Bit Field Type SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SIGNATURE5, SIGNATURE6, SIGNATURE7, SIGNATURE8, SIGNATURE9, SIGNATURE10, SIGNATURE11, SIGNATURE12, SIGNATURE13, SIGNATURE14, SIGNATURE15
Indicating whether preemption is supported. Enumeration Type OFF, ON
Indicating whether ARP-based preemption between TCs is supported. This switch only has impact on the TC-based priorities. When the priority is based on the TC and the switch is enabled, for the following two situations, the preempting service should have a higher priority and ARP priority than the preempted service does: 1.The preempting service is the streaming service and the preempted service is the interactive or background service. 2. The preempting service is the interactive service and the preempted service is the background service. Enumeration Type OFF, ON
1.There are three block priorities: high, normal and
low.
2.High priority: Blocking a cell immediately.
3.Normal priority: Blocking a cell once there are no
users in it within a specified time, or blocking it even
if there are some users when the specified time
expires.
4.Low priority: Blocking a cell when there are no
users in the cell.
Enumeration Type HIGH(High priority), NORMAL(Normal priority), LOW(Low priority)
This parameter specifies the priority of an IP route. Enumeration Type HIGH, LOW
Priority of the signalling link. 0 indicates the highest priority. Interval Type 0~99
Route priority. 0 indicates the highest priority. Interval Type 0~99
Reference used to determine which priority is
arranged first in the priority sequence.
If the ARP is preferably used, the priority sequence is
gold > silver > copper. If the ARPs are all the same,
the TrafficClass is used and the priority sequence is
conversational > streaming > interactive >
background.
If the TrafficClass is preferably used, the priority
sequence is conversational > streaming > interactive >
background. If the TrafficClass factors are all the
same, the ARP factor is used and the priority
sequence is gold > silver > copper.
Enumeration Type ARP, TrafficClass
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for extension services, such as CMB and MBMS. The value 0 means that these cells do not support extension services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, extension services are preferably absorbed by this group of cells. Interval Type 0~7
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSDPA services. The value 0 means that these cells do not support HSDPA services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, HSDPA are preferably absorbed by this group of cells. Interval Type 0~7
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSUPA services. The value 0 means that these cells do not support HSUPA services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, HSUPA services are preferably absorbed by this group of cells. Interval Type 0~7
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 non-real-time services. The value 0 means that these cells do not support R99 non-real-time services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, R99 non-real-time services are preferably absorbed by this group of cells. Interval Type 0~7
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 real-time services. The value 0 means that these cells do not support R99 real-time services. The value 1 indicates the highest priority whereas the value 7 indicates the lowest. That is, R99 real-time services are preferably absorbed by this group of cells. Interval Type 0~7
This parameter specifies the processing duration of the cell blocking in the RNC. Interval Type 2~30
1) INVOKE_TRACE_SWITCH. When it is checked,
RNC will start Invoke Trace procedure upon receiving
INVOKE TRACE Message form CN, otherwise,
RNC won't start the Invoke Trace procedure though it
receives the INVOKE TRACE message.
2) SYS_INFO_UPDATE_FOR_IU_RST. When it is
checked, RNC will broadcast SYSTEM
INFORMATION messages to UE when Iu reset,
otherwise, RNC won't broadcast SYSTEM
INFORMATION messages to UE when IU reset.
3) DRNC_DIRECT_DSCR. When it is checked,
DRNC will start DSCR procedure directly in RRC
states other than CELL_DCH, otherwise, DRNC will
transfer RRC CELL UPDATE message to SRNC.
4) RNC_SHARE_SWITCH. When it is checked,
RNC traffic share function will be valid, otherwise,
RNC traffic function cannot be used.
5)RNCAP_IMSI_HO_SWITCH.When it is checked,
Imsi handover function will be used,otherwise it will
be not used.
6) TERMINAL_VERSION_DEBASE_SWITCH.
When it is checked, terminal version R4 will debase
to R99.
7)SYS_HO_OUT_CIPHER_SWITCH.When it is
checked ,the RNC will add ciphering byte at GSM
HANDOVER COMMAND if the GSM system do not
add any cipher information at that message.
8)SYS_HO_CIPHER_CONFIG.When it is checked ,
the cipher configuration in the added cipher byte in
GSM will be A5/1.When it is no checked ,the cipher
configuration is A5/0.
9)BARRED_CELL_FOR_CSDOMAIN_RST.When
it is checked, cell will be bared when CS domain is
invalid, otherwise the CS domain will be bared when
Bit Field Type INVOKE_TRACE_SWITCH, SYS_INFO_UPDATE_FOR_IU_RST, DRNC_DIRECT_DSCR, RNC_SHARE_SWITCH, RNCAP_IMSI_HO_SWITCH, TERMINAL_VERSION_DEBASE_SWITCH, SYS_HO_OUT_CIPHER_SWITCH, SYS_HO_CIPHER_CONFIG, BARRED_CELL_FOR_CSDOMAIN_RST, CR2284R1_SWITCH, CDT_MSG_FULL_TRACE, CR2284R1_COMPATIBLE_SWITCH, COMBINE_OPERATION_DRD_SWITCH, UL_INTER_PROTECT_SWITCH, UPLINK_MDC_ENHENCEMENT_SWITCH, NODEB_PRIVATE_INTERFACE_SWITCH
SS7 protocol type supported by the DSP.
ITUT: International Telecommunication Union -
Telecommunication Standardization Sector
ANSI: American National Standards Institute
TTC: THE TELECOMMUNICATION
TECHNOLOGY COMMITTEE (use for JAPAN). Enumeration Type ITUT, ANSI, TTC
If the background Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release request to RRC layer,if the Background Radio Access Bear haven't been released until the Background service T2 timeout, the PDCP layer will resend release request indication. Interval Type 0~60
If the Conversational Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release request to RRC layer, if the Conversational Radio Access Bear haven't been released until the Conversational service T2 timeout, the PDCP layer will resend release request indication. Interval Type 0~60
If the IMS Radio Access Bear timer T1 expired,the
PDCP will send RRC release request message to RRC
layer and start timer T2,
after sending release request to RRC layer, if the IMS
Radio Access Bear for signal haven't been released
until the IMS service T2 timeout, the PDCP layer will
resend release request indication.
Interval Type 0~60
If the Interactive Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release request to RRC layer, if the Interactive Radio Access Bear haven't been released until the Interactive service T2 timeout, the PDCP layer will resend release request indication. Interval Type 0~60
If the Streaming Radio Access Bear timer T1 expired,the PDCP will send RRC release request message to RRC layer and start timer T2,after sending release request to RRC layer, if the Streaming Radio Access Bear haven't been released until the Streaming service T2 timeout, the PDCP layer will resend release request indication. Interval Type 0~60
This parameter specifies whether to select a single port or all ports on a board. Enumeration Type ALL(Select all ports), SINGLE(Select one port)
Indicating whether to replace relocation procedure with DSCR procedure between the RNC and the neighboring RNC for PS BE Traffic. Enumeration Type CORRM_SRNSR_PSBE_RELOC, CORRM_SRNSR_PSBE_DSCR
R99 PS background service downlink factor. Interval Type 0~100
R99 PS background primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 PS background bearing primary path load threshold. Interval Type 0~100
R99 PS background secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 PS background primary secondary path load ratio threshold. Interval Type 0~100
R99 PS background service uplink factor. Interval Type 0~100
Offset of the PSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the downlink common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered seriously, thus the cell capacity is influenced. Interval Type -350~150
R99 PS conversational service downlink factor. Interval Type 0~100
R99 PS conversational primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 PS conversational bearing primary path load threshold. Interval Type 0~100
R99 PS conversational secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 PS conversational primary secondary path load ratio threshold. Interval Type 0~100
R99 PS conversational service uplink factor. Interval Type 0~100
Sequence No. of a DL primary scrambling code in a cell. For detailed information of this parameter, refer to 3GPP TS 25.413. Interval Type 0~511
R99 PS high priority interactive bearing primary path load threshold. Interval Type 0~100
R99 PS high priority interactive primary secondary path load ratio threshold. Interval Type 0~100
PS domain Relocation GSM load THD.
This parameter specifies the PS domain relocation
GSM load threshold. When the GSM load policy is
used, that is, when [NcovHoOn2GldInd] in SET
INTERRATHONCOV is set to ON, the PS domain
inter-system relocation out process will be stopped if
the GSM system send its cell load to the RNC and the
cell load exceeds the PS domain Reloc GSM load
THD. Otherwise, the RNC does not stop the PS
domain inter-system relocation out process.
Interval Type 0~100
When detecting that the Ps' Background User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. Interval Type 0~14400
When detecting that the Ps' Conversational User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. Interval Type 0~14400
When detecting that the Ps' IMS signal had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. Interval Type 0~64800
When detecting that the Ps' Interactive User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. Interval Type 0~14400
When detecting that the Ps' Streaming User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. Interval Type 0~14400
Indicating whether the PS domain permits the CN information to update . Enumeration Type OFF, ON
Ps Information Update protection timer. Interval Type 60~900
R99 PS interactive service downlink factor. Interval Type 0~100
R99 PS interactive service uplink factor. Interval Type 0~100
R99 PS high PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 PS high PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 PS low PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 PS low PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 PS middle PRI interactive primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 PS middle PRI interactive secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 PS low priority interactive bearing primary path load threshold. Interval Type 0~100
R99 PS low priority interactive primary secondary path load ratio threshold. Interval Type 0~100
R99 PS middle priority interactive bearing primary path load threshold. Interval Type 0~100
R99 PS middle priority interactive primary secondary path load ratio threshold. Interval Type 0~100
This parameter specifies feature mode of operators in the PS domain. You should configure the network resource identifier (NRI) when MOCN or Iu-Flex is supported. Enumeration Type SUPP_NONE, SUPP_IUFLEX, SUPP_MOCN, SUPP_IUFLEX_MOCN
NRI length for PS domain. Interval Type 1~10
PS CDR(Call Drop Ratio) Per Spu, if the ratio is higher than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
The minimum number of PS service setup attempt Per Spu, the sum of PS setup attempt need to be higher than this threshold to arise KPI alarm which type is PS service successful setup ratio. Interval Type 0~65534
Successful PS service setup ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
The minimum number of PS release Per Spu, the sum of PS release need to be higher than this threshold to arise KPI alarm which type is PS call drop ratio. Interval Type 0~65534
Whether to impose the access restriction on the PS domain. Enumeration Type FALSE, TRUE
Indicating whether the cell allows PS service inter-
RAT handover.
ON: PS service inter-RAT handover is enabled.
OFF: PS service inter-RAT handover is disabled.
Service handover refers to the handover attribute and
related parameter configuration on the network side
for each service. When a service is established, the
related measurements and inter-RAT handover are
immediately triggered. These two switches are
enabled only for service handover; generally, they are
disabled by default.
Note that the service handover is enabled only when
the handover attribute is set to
HO_TO_GSM_SHOULD_BE_PERFORM and PS
service inter-RAT handover is set to ON. Both
conditions are mandatory. For hybrid services, the
service handover is not triggered.
Enumeration Type ON, OFF
R99 PS streaming service downlink factor. Interval Type 0~100
R99 PS streaming primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
R99 PS streaming bearing primary path load threshold. Interval Type 0~100
R99 PS streaming secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
R99 PS streaming primary secondary path load ratio threshold. Interval Type 0~100
R99 PS streaming service uplink factor. Interval Type 0~100
PS rate negotiation switch.
1)
PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH:
When the switch is on, access at a rate of 0 kbit/s or
on the FACH is determined according to the current
connection state of the RRC if the PS BE admission
and the later preemption and queuing fail.
2)
PS_BE_INIT_RATE_DYNAMIC_CFG_SWITCH:
When the switch is on, the initial rate of the service
should be dynamically configured according to the
value of Ec/No reported by the UE when the PS BE
service is established.
3) PS_BE_IU_QOS_NEG_SWITCH: When the
switch is on, the Iu QoS Negotiation function is
applied to the PS BE service if Alternative RAB
Parameter Values IE is present in the RANAP RAB
ASSIGNMENT REQUEST or RELOCATION
REQUEST message.
4) PS_RAB_DOWNSIZING_SWITCH: When the
switch is on and the RAB downsizing license is
activated, the initial speed is determined on the basis
of cell resources. Downsizing is implemented for BE
services.
5)
PS_RSC_FEEDBK_RABSETUP_CACFAIL_SWIT
CH: When the switch is on, the SF feedback function
is supported. If the SF is provided in feedback
information after the application for the cell SF is
rejected, access at a lower speed is performed on the
basis of the returned SF.
6) PS_STREAM_IU_QOS_NEG_SWITCH: When
the switch is on, the Iu QoS Negotiation function is
applied to the PS STREAM service if Alternative
Bit Field Type PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH, PS_BE_INIT_RATE_DYNAMIC_CFG_SWITCH, PS_BE_IU_QOS_NEG_SWITCH, PS_RAB_DOWNSIZING_SWITCH, PS_RSC_FEEDBK_RABSETUP_CACFAIL_SWITCH, PS_STREAM_IU_QOS_NEG_SWITCH, PS_BE_STRICT_IU_QOS_NEG_SWITCH
The total PS throughput of all the operators cannot exceed that defined in the license file. Interval Type 0~3910000
This parameter specifies the type of the port. Enumeration Type BOOL(Digital Port), VALUE(Analog Port)
This parameter specifies the IP address for the NodeB FE port. IP Address Type -
This parameter specifies the subnet mask for the IP address of the NodeB FE port. IP Address Type -
This parameter specifies whether MBMS PTM non-streaming bearers can be pre-empted by other MBMS PTM bearers or non-MBMS bearers. If this parameter is set to ON, a PTM non-streaming bearer might be pre-empted by an MBMS bearer of a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great impact because the PTM bearer serves more than one user. Enumeration Type ON, OFF
This parameter specifies whether MBMS PTM streaming bearers can pre-empt other MBMS PTM bearers and non-MBMS bearers. If this parameter is set to ON, pre-emption is triggered when PTM streaming bearer admission fails. That is, a lower-priority MBMS bearer or a non-MBMS bearer is released. Thus, the ongoing service is disrupted and call drop even occurs. Enumeration Type ON, OFF
This parameter specifies whether MBMS PTM streaming bearers can be pre-empted by other MBMS PTM bearers or non-MBMS bearers. If this parameter is set to ON, a PTM streaming bearer might be pre-empted by an MBMS bearer of a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great impact because the PTM bearer serves more than one user. Enumeration Type ON, OFF
This parameter specifies the type of an Ethernet port. Enumeration Type FE, GE
Length of smoothing filter window of potential user control (PUC). Interval Type 1~32
Identifying the potential user control period. When the cell load is high, the cell selection and reselection can be periodically modified in order to enable users in unconnected mode to select other cells more easily, thus reducing the local cell load. Interval Type 6~86400
This parameter specifies the coefficient of the penalty time after the PTP RB admission fails. The penalty time is MCCH modification period multiplied by this parameter. During the penalty time, users in the cell are not allowed to initiate PTP RB requests. Interval Type 0~60
This parameter is used to inform the UE of the method for translating the received Transmit Power Control (TPC) commands. In other words, it is used to select UL power control algorithm. For details of this parameter, refer to the 3GPP TS 25.214. Enumeration Type ALGORITHM1, ALGORITHM2
This parameter specifies the minimum DSCP value of queue 0. The IP packet with the DSCP value within the range (63, minimum DSCP value of queue 0] enters queue 0. Interval Type 0~63
This parameter specifies the minimum DSCP value of queue 1. The IP packet with the DSCP value within the range (minimum DSCP value of queue 0, minimum DSCP value of queue 1] enters queue 1. Interval Type 0~63
This parameter specifies the minimum DSCP value of queue 2. The IP packet with the DSCP value within the range (minimum DSCP value of queue 1, minimum DSCP value of queue 2] enters queue 2. Interval Type 0~63
This parameter specifies the minimum DSCP value of queue 3. The IP packet with the DSCP value within the range (minimum DSCP value of queue 2, minimum DSCP value of queue 3] enters queue 3. Interval Type 0~63
This parameter specifies the minimum DSCP value of queue 4. The IP packet with the DSCP value within the range (minimum DSCP value of queue 3, minimum DSCP value of queue 4] enters queue 4. Interval Type 0~63
Function set supported by the local RNC for the adjacent node The value CS1 (or CS2) indicates that the local end connects to the adjacent node through the CS1 (or CS2) version protocol. The CS2 version protocol is backward compatible with the CS1 version protocol. Therefore, it is recommended to use the default value CS2 except that the adjacent node is not compatible with CS2 messages from the local end. Enumeration Type CS1, CS2
Quality threshold of HCS cell reselection. It can be used to calculate the quality level of the specified cell in HCS reselection H rules. Interval Type 0~99
This parameter indicates that in the CELL_FACH
connection mode, the measurement hysteresis of the
UE is 1. It is used when CPICH RSCP is used in cell
selection and reselection measurement. This
parameter is not configured when the value is 255.
Otherwise, the greater the parameter value is, the
harder the cell selection happens. For detailed
inforamtion, refer to 3GPP TS 25.304.
Interval Type 0~40,255
This parameter indicates that in the CELL_PCH or
URA_PCH connection mode, the measurement
hysteresis of the UE is 1. It is used when CPICH
RSCP is used in cell selection and reselection
measurement. This parameter is not configured when
the value is 255.
Otherwise, the greater the parameter value is, the
harder the cell selection happens. For detailed
inforamtion, refer to 3GPP TS 25.304.
Interval Type 0~40,255
This parameter indicates that in the CELL_FACH
connection mode, the measurement hysteresis of the
UE is 2. It is used when CPICH EcNo is used in cell
selection and reselection measurement. This
parameter is not configured when the value is 255.
Otherwise, the greater the parameter value is, the
harder the cell selection happens. For detailed
inforamtion, refer to 3GPP TS 25.304.
Interval Type 0~40,255
This parameter indicates that in the CELL_PCH or
URA_PCH connection mode, the measurement
hysteresis of the UE is 2. It is used when CPICH
EcNo is used in cell selection and reselection
measurement. This parameter is not configured when
the value is 255.
Otherwise, the greater the parameter value is, the
harder the cell selection happens. For detailed
inforamtion, refer to 3GPP TS 25.304.
Interval Type 0~40,255
Offset between the neighboring GSM cell and
WCDMA cell.
This specifies the offset of the measurement value of
the neighboring GSM cell signal quality. This
parameter is used for RSSI measurement. The offset
is subtracted from the neighboring cell measurement
value before cell reselection.
In cell reselection algorithm, this parameter is used for
moving the border of a cell. Content: During cell
selection or resection, the larger the value of the
parameter, the smaller the probability of selecting
inter-RAT neighboring cells. The smaller the value of
the parameter, the larger the probability of selecting
inter-RAT neighboring cells. This parameter can be
configured by the network planner according to
reality.
For details, refer to 3GPP TS 25.331.
As for the impact on network performance:
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value the parameter, the higher the probability of
doing so.
Interval Type -50~50
The minimum required quality threshold corresponding to CPICH Ec/No. The UE can camp on the cell only when the measured CPICH Ec/No is greater than the value of this parameter. The higher the parameter value is, the more difficult it is for the UE to reside in the cell. The lower parameter value is, the easier it is for the UE to reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the PCCPCH. For detailed information, refer to the 3GPP TS 25.304. Interval Type -24~0
This parameter indicates whether to configure the minimum quality level. When it is set to FALSE, the UE adopts the corresponding value of the current serving cell, added through the ADD CELLSELRESEL command. This parameter is generally set to FALSE. When it is set to TRUE, the UE adopts the value in ADD NRNCCELL command. Enumeration Type TRUE(Configure the minimum quality threshold), FALSE(Not configure the minimum quality threshold)
Minimum RX level of the GSM cell.
Before the UE camps on the cell, take the
measurement of the signal quality in the cell. If the
quality is better than this parameter, this indicates that
the cell can obtain better QoS and the UE is allowed
to camp on this cell. Otherwise, the UE cannot obtain
good QoS in this cell and does not camp on the cell.
Interval Type -58~-13
The minimum required RX threshold corresponding to CPICH RSCP. The UE can camp on the cell only when the measured CPICH RSCP is greater than the value of this parameter. The setting of Qrxlevmin should be related to Qqualmin. The higher the parameter is, the more difficult it is for the UE to reside in the cell. The lower parameter is, the easier it is for the UE to reside in the cell, but it is possible that the UE cannot receive the system messages that are sent through the PCCPCH. For detailed information, refer to 3GPP TS 25.304. Interval Type -58~-13
Indicating whether the minimum required RX level is extended. For detailed information of this parameter, refer to 3GPP TS 25.304. Enumeration Type TRUE, FALSE
This parameter indicates whether to configure the minimum RX level. When it is set to FALSE, the UE adopts the corresponding value of the current serving cell, added through the ADD CELLSELRESEL command. This parameter is generally set to FALSE. Enumeration Type TRUE(Configure the minimum signal level for access), FALSE(Not configure the minimum signal level for access)
Measurement quantity of cell selection and reselection. It can be set to CPICH Ec/N0 or CPICH RSCP. For detailed information of this parameter, refer to 3GPP TS 25.304. Enumeration Type CPICH_ECNO(CPICH Ec/N0), CPICH_RSCP(CPICH RSCP)
Indicating whether queue is supported. When a user initiates a call, if cell resources are insufficient and the user is queue supportive, the RNC tries to arrange this user to join the queue to increase access success ratio. Enumeration Type OFF, ON
Queue length. The total number of users in queue of each cell should not exceed the value specified in this parameter. When a new user needs queuing, 1) If the queue has vacancy, the user joins the queue immediately. 2) If the queue is full and there is a user whose queue time exceeds the allowed maximum queue time, this user is out of the queue and access fails. At the same time, the new user joins the queue. 3) If the queue has a user whose priority is lower than that of the new user, the user in the queue with the lowest priority is out of the queue and access fails. At the same time, the new user joins the queue. 4)For other situations, the user cannot join the queue. Interval Type 5~20
This parameter specifies the index number that identifies the configuration of a typical RAB. Interval Type 0~99
The timer is started when the RNC initiates the RAB Modify procedure. If RAB modify message is received from the CN when this timer is actived, the rate information assigned by CN when establishing traffic will be reserved as the new assigned rate is used. Interval Type 1~65535
Identifying a routing area in a location area for a PLMN of GSM-MAP type. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003. Interval Type 0~255
Sequence No. of an available sub channel. A maximum of 12 sub channels (from sub channel 0 to 11) can be selected. For detailed information of this parameter, refer to 3GPP TS 25.214. Bit Field Type SUBCHANEL0, SUBCHANEL1, SUBCHANEL2, SUBCHANEL3, SUBCHANEL4, SUBCHANEL5, SUBCHANEL6, SUBCHANEL7, SUBCHANEL8, SUBCHANEL9, SUBCHANEL10, SUBCHANEL11
A timer used to wait for the reset response from CN. Interval Type 10000~240000
When RAN Sharing Supported,RNC can configure multi-plmn. Enumeration Type NO, YES
Identifying the type of the inter-RAT cell NO_CAPABILITY indicates that the capacity of the GSM cell remains unknown. It is not recommended to set the cell type to NO_CAPABILITY. If the cell type is NO_CAPABILITY, the inter-RAT handover cannot be triggered. Enumeration Type NO_CAPABILITY(Cell capability unknown), GSM~1 GPRS~2 EDGE
A timer used to respond to CN reset. Interval Type 0~240000
The rate matching factor of a transport channel.For detailed information of this parameter, refer to 3GPP TS 25.212. Interval Type 1~256
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink data rate recover timer length in fast TF restriction. RateRstrctTimerLen and RateRecoverTimerLen are effective only to the downlink. The uplink fast TF restriction is performed by the UE. For the uplink fast TF restriction, the RNC only delivers a new TFCS and randomly selects a comparatively bigger time length in the signaling value scope. The UE automatically release the TF restriction once the time expires. The higher RateRecoverTimerLen is, the more slowly the BE service rate recovers, while the lower probability that the overload is triggered again in a short period. The lower RateRecoverTimerLen is, the more quickly the BE service rate is recovered, but more overloads occur. Interval Type 1~65535
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink data rate restrict coefficient in fast TF restrict The smaller this parameter is, the larger the TF restrict effect. The lower the parameter is, the more severe the rate is restricted. An excessive low parameter value, however, may affect the BE transmission delay. A high parameter value means loose restriction, which may be ineffective in alleviating the overload. Interval Type 1~99
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the time length of the downlink OLC fast TF restriction. RateRstrctTimerLen and RateRecoverTimerLen are effective only to the downlink. The uplink fast TF restriction is performed by the UE. For the uplink fast TF restriction, the RNC only delivers a new TFCS and randomly selects a comparatively bigger time length in the signaling value scope. The UE automatically release the TF restriction once the time expires. The higher RateRstrctTimerLen is, the more slowly the BE service rate decreases. The lower RateRstrctTimerLen is, the harder it is to receive the overload release instruction. Interval Type 1~65535
This parameter specifies the name of the rollback point. The target rollback point must exist and must be subsequent to the current point. String Type -
This parameter specifies the type of rollback point. LASTRBP indicates the last rollback point, which can be set by the user or the calculated point by the RNC. APPOINTRBP indicates the rollback point specified by the user. Enumeration Type LASTRBP(last rollbackpoint), APPOINTRBP(appointed rollbackpoint)
A timer used to wait for the RB reconfiguration response from UE in the RB procedure. Interval Type 300~10000
A timer to RNC wait for the RB release response from UE in the RB procedure. Interval Type 300~10000
A timer to RNC wait for the RB setup response from UE in the RB procedure. Interval Type 300~10000
This parameter specifies the rate down coefficient of the logical port. Interval Type 0~100
This parameter specifies the interval between recounting operations. Interval Type 1~360
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink OLC fast TF rate recovery coefficient. The greater this parameter is, the larger the TF restrict effect. Interval Type 100~200
This parameter specifies the decrease rate alarm recover threshold. Interval Type 20~99
This parameter specifies whether to back up the board. Enumeration Type YES, NO
This parameter specifies the target frequency band in the redirection procedure. Enumeration Type Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
When the UL load state or DL load state of the serving cell is LDR or OLC, a UE may be redirected to another cell according to the traffic type. This parameter specifies the possibility of redirecting the UE to another cell. When this parameter is set to 0, the RRC redirection is not performed if the load state on the serving cell is LDR or OLC. LDR indicates basic congestion. OLC indicates overload congestion. Interval Type 0~100
When the load of the serving cell is within the normal range, a UE may be redirected to another cell according to the traffic type. This parameter specifies the possibility of redirecting the UE to another cell. When this parameter is set to 0, the RRC redirection is not performed if the load of the serving cell is within the normal range. Interval Type 0~100
This parameter specifies whether the RRC redirection algorithm is valid for the specified service. The algorithm is valid only when the RRC redirection switch is enabled and when this parameter is set to ONLY_TO_INTER_FREQUENCY or ONLY_TO_INTER_RAT. Value OFF indicates that RRC redirection is not allowed. Value ONLY_TO_INTER_FREQUENCY indicates that only the RRC redirection to an inter-frequency neighboring cell is allowed. Value ONLY_TO_INTER_RAT indicates that only the RRC redirection to an inter-RAT neighboring cell is allowed. Enumeration Type OFF, ONLY_TO_INTER_FREQUENCY, ONLY_TO_INTER_RAT
This parameter specifies the target downlink UARFCN of a cell for RRC redirection. Interval Type 0~16383
This parameter specifies the target uplink UARFCN
of a cell for RRC redirection. Depending on the band
indication, the value range as shown below:
Band1:
Common frequencies: [9612-9888]
Special frequencies: none
Band2:
Common frequencies: [9262-9538]
Special frequencies: {12, 37, 62, 87, 112, 137, 162,
187, 212, 237, 262, 287}
Band3:
Common frequencies: [937-1288]
Special frequencies: none
Band4:
Common frequencies: [1312-1513]
Special frequencies: {1662, 1687, 1712, 1737, 1762,
1787, 1812, 1837, 1862}
Band5:
Common frequencies: [4132-4233]
Special frequencies: {782, 787, 807, 812, 837, 862}
Band6:
Common frequencies: [4162-4188]
Special frequencies: {812, 837}
Band7:
Common frequencies: [2012-2338]
Special frequencies: {2362, 2387, 2412, 2437, 2462,
2487, 2512, 2537, 2562, 2587, 2612, 2637, 2662,
2687}
Band8:
Common frequencies: [2712-2863]
Special frequencies: none
Band9:
Common frequencies: [8762-8912]
Special frequencies: none
Interval Type 0~16383
This parameter specifies whether the UL frequency
of the target cell of redirection needs to be configured.
- TRUE: The UL frequency needs to be configured.
- FALSE: The UL frequency does not need to be
configured. It is configured automatically according to
the relationship between UL and DL frequencies.
Enumeration Type TRUE, FALSE
This parameter specifies the link No. of the clock source of the output clock. Interval Type 0~31
This parameter specifies the backup link No. of the clock source of the output clock. Interval Type 0~31
This parameter specified the output switch of 2 MHz output clock 1. Enumeration Type OFF, ON
This parameter specified the output switch of 2 MHz output clock 2. Enumeration Type OFF, ON
Indicates whether register beared by fach under call shock control. This function only applies under NodeB level or cell level call shock control. Enumeration Type OFF, ON
This parameter specifies re-host policy type for NodeB. The value "REHOSTRIGHTNOW" indicates to perform re-host policy for the NodeB immediately when the RNC recovers from disaster. The value "REHOSTDELAY" indicates to perform re-host policy for the NodeB after a specified delayed period when the RNC recovers from disaster. The value "REHOSTWHEN" indicates to perform re-host policy for the NodeB at a specific time. Enumeration Type REHOSTRIGHNOW(RehostRighNow), REHOSTDELAY(RehostDelay), REHOSTWHEN(RehostWhen)
This timer is started when an AAL2 signaling entity sends the service user an indication for releasing an AAL2 connection. Interval Type 2000~60000
A timer to RNC wait for another relocation request in relocation procedure. Interval Type 1~10000
A timer to RNC wait for the relocation command message in relocation procedure. Interval Type 1~20000
A timer to RNC wait for rnsap relocation commit message in relocation procedure. Interval Type 1~20000
A timer used for data forwarding in relocation procedure. Interval Type 1~20000
A timer to RNC wait for Iu release command in the failed relocation procedure. Interval Type 1~10000
A timer to RNC wait for the Iu release command message in relocation procedure. Interval Type 1~60000
A timer to RNC wait for mobile information confirmation in relocation procedure. Interval Type 1~10000
A timer to RNC wait for the response to physical channel reconfiguration in relocation procedure. Interval Type 1~10000
A timer to RNC wait for inter-RAT handover completion in relocation procedure. Interval Type 1~20000
This timer is started when an AAL2 signaling entity sends the peer node a request for releasing an AAL2 connection. Interval Type 2000~60000
This parameter specifies the threshold of immediate
rate reduction after the soft handover failure. The rate
reduction of the active set and the SHO retry
procedure can be triggered without the intra-frequency
reporting event reported, when the quality of the cell
in the active set fulfills the following conditions.
The formula of direct SHO rate reduction is
new > Mbest_cell - RelThdForDwnGrd
where
Mnew: the CPICH Ec/No measurement value of the
failed cell1
Mbest_cell: the CPICH Ec/No measurement value in
the latest measurement report of the best cell
identified by the RNC according to 1D
RelThdForDwnGrd: the relative threshold for direct
rate reduction. It can be configured on the BAM
server.
Note: The smaller the value of this parameter, the
harder it is to trigger SHO rate reduction, but the
greater intra-frequency interference caused by the cell
that does not join the active set, the greater possibility
of call drops. On the contrary, the larger the value of
this parameter, the easier it is to trigger SHO rate
reduction which ensures the signal quality. But,
frequent triggering of SHO rate reduction may affect
the use of the services.
Interval Type -29~29
This parameter specifies the function of the route. String Type -
Use description. String Type -
Repeat Number of send Write-Replace. Interval Type 0~65535
Repeat Period of send Write-Replace. Interval Type 1~4096
This parameter specifies the reporting period of event 1A. That is, event 1A is reported at each reporting interval. Usually, event 1A is reported only once. Nevertheless, if the cell, where event 1A is reported, does not join the active set in a specified period of time, the UE can change the reporting of event 1A into periodical mode.to avoid missing of measurement reports. The event 1A of this cell is reported for [PeriodMRReportNumfor1A] times with the reporting interval as the set value. Enumeration Type NON_PERIODIC_REPORT, D250~1 D500~2 D1000~3 D2000~4 D4000~5 D8000~6 D16000
This parameter specifies the number of reporting times of event 1C for periodical reporting. That is, event 1C is reported at each reporting interval. Usually, event 1C is reported only once. Nevertheless, if the cell, where event 1C is reported, does not join the active set in a specified period of time, the UE can change the reporting of event 1C into periodical mode.to avoid missing of measurement reports. The event 1C of this cell is reported for [PeriodMRReportNumfor1C] times with the reporting interval as the set value. Enumeration Type NON_PERIODIC_REPORT, D250~1 D500~2 D1000~3 D2000~4 D4000~5 D8000~6 D16000
This parameter specifies the number of reporting times of event 1J for periodical reporting. That is, event 1J is reported at each reporting interval. Usually, event 1J is reported only once. Nevertheless, if the cell, where event 1J is reported, does not join the EDCH active set in a specified period of time, the UE can change the reporting of event 1J into periodical mode.to avoid missing of measurement reports. The event 1J of this cell is reported for [PeriodMRReportNumfor1J] times with the reporting period as the set value. Enumeration Type NON_PERIODIC_REPORT, D250~1 D500~2 D1000~3 D2000~4 D4000~5 D8000~6 D16000
This parameter specifies the 2G cell capability required by inter-RAT handovers from 3G networks to 2G networks. If the 2G cell capability does not meet the requirement, the handover is not performed. In terms of the ability to support PS services, EDGE cells rank first, GPRS cells second, and GSM cells third. When the PS service is handed over to a 2G network, the service is set up at the closest rate that the 2G network supports. Enumeration Type GSM, GPRS, EDGE
CORRM Algo reserved switch 0. The switch is reserved for further change request use. Bit Field Type RESERVED_SWITCH_0_BIT1, RESERVED_SWITCH_0_BIT2, RESERVED_SWITCH_0_BIT3, RESERVED_SWITCH_0_BIT4, RESERVED_SWITCH_0_BIT5, RESERVED_SWITCH_0_BIT6, RESERVED_SWITCH_0_BIT7, RESERVED_SWITCH_0_BIT8, RESERVED_SWITCH_0_BIT9, RESERVED_SWITCH_0_BIT10, RESERVED_SWITCH_0_BIT11, RESERVED_SWITCH_0_BIT12, RESERVED_SWITCH_0_BIT13, RESERVED_SWITCH_0_BIT14, RESERVED_SWITCH_0_BIT15, RESERVED_SWITCH_0_BIT16, RESERVED_SWITCH_0_BIT17, RESERVED_SWITCH_0_BIT18, RESERVED_SWITCH_0_BIT19, RESERVED_SWITCH_0_BIT20, RESERVED_SWITCH_0_BIT21, RESERVED_SWITCH_0_BIT22, RESERVED_SWITCH_0_BIT23, RESERVED_SWITCH_0_BIT24, RESERVED_SWITCH_0_BIT25, RESERVED_SWITCH_0_BIT26, RESERVED_SWITCH_0_BIT27, RESERVED_SWITCH_0_BIT28, RESERVED_SWITCH_0_BIT29, RESERVED_SWITCH_0_BIT30, RESERVED_SWITCH_0_BIT31, RESERVED_SWITCH_0_BIT32
CORRM Algo reserved switch 1. The switch is reserved for further change request use. Bit Field Type RESERVED_SWITCH_1_BIT1, RESERVED_SWITCH_1_BIT2, RESERVED_SWITCH_1_BIT3, RESERVED_SWITCH_1_BIT4, RESERVED_SWITCH_1_BIT5, RESERVED_SWITCH_1_BIT6, RESERVED_SWITCH_1_BIT7, RESERVED_SWITCH_1_BIT8, RESERVED_SWITCH_1_BIT9, RESERVED_SWITCH_1_BIT10, RESERVED_SWITCH_1_BIT11, RESERVED_SWITCH_1_BIT12, RESERVED_SWITCH_1_BIT13, RESERVED_SWITCH_1_BIT14, RESERVED_SWITCH_1_BIT15, RESERVED_SWITCH_1_BIT16, RESERVED_SWITCH_1_BIT17, RESERVED_SWITCH_1_BIT18, RESERVED_SWITCH_1_BIT19, RESERVED_SWITCH_1_BIT20, RESERVED_SWITCH_1_BIT21, RESERVED_SWITCH_1_BIT22, RESERVED_SWITCH_1_BIT23, RESERVED_SWITCH_1_BIT24, RESERVED_SWITCH_1_BIT25, RESERVED_SWITCH_1_BIT26, RESERVED_SWITCH_1_BIT27, RESERVED_SWITCH_1_BIT28, RESERVED_SWITCH_1_BIT29, RESERVED_SWITCH_1_BIT30, RESERVED_SWITCH_1_BIT31, RESERVED_SWITCH_1_BIT32
CORRM Algo reserved U32 para 0. The para of 32 bits is reserved for further change request use. Interval Type 0~4294967295
CORRM Algo reserved U32 para 1. The para of 32 bits is reserved for further change request use. Interval Type 0~4294967295
CORRM Algo reserved U8 para 0. The para of 8 bits is reserved for further change request use. Interval Type 0~255
CORRM Algo reserved U8 para 1. The para of 8 bits is reserved for further change request use. Interval Type 0~255
This timer is started when an AAL2 signaling entity sends the peer node a request for resetting an AAL2 path. Interval Type 2000~60000
This parameter specifies the time length to restart the timer for the PPP link. Interval Type 2~5
Specifies the mode of restricting the access classes. Enumeration Type RestrictionFixed, RestrictionFlexible
This parameter specifies the filter coefficient for retransmission ratio measurement. Interval Type 0~10
Each bit indicates whether to retry the corresponding HSPA technology. If a bit is set the 1, then the RNC retries the corresponding HSPA technology if the UE is not using the corresponding HSPA technology. Otherwise, no retry is performed. Bit Field Type SRB_OVER_HSDPA, SRB_OVER_HSUPA, TTI_2MS, MIMO, 64QAM, L2_ENHANCE, DTX_DRX, HSSCCH_LESS_OPERATION
This parameter specifies the work mode of RLC
entity.
- AM: Acknowledged Mode. Automatic Repeat
Request (ARQ) is used in error correction.
- UM: Unacknowledged Mode. Retransmission is not
applied. According to the configuration, the data with
errors is discarded or marked.
- TM: Transparent Mode. No protocol overhead is
added to the higher-layer data. The protocol data units
with errors may be discarded or marked.
For details of this parameter, refer to the 3GPP TS
25.322.
Enumeration Type AM, UM, TM
This parameter defines each transport block size corresponding in transport format. For a common channel, the RLC size reflects the actual transport block size. For detailed information of this parameter, refer to 3GPP TS 25.322. Interval Type 0~4992
This parameter should fulfill the coverage requirement of the network planning, and the value is relative to [PCPICH transmit power]. If the parameter is excessively high, downlink interference may occur. If the parameter is excessively low, the downlink power control may be affected. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type -350~150
This parameter should consider the maximum downlink transmit power and the dynamic range of power control, and the value is relative to [PCPICH transmit power]. Since the dynamic range of power control is set to 15 dB, this parameter is recommended as [RL Max DL TX power] - 15 dB. If the parameter value is excessively low, the transmit power may become excessively low because of incorrect estimation of SIR. If the parameter value is excessively high, the downlink power control may be affected. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type -350~150
A timer to RNC wait for the response to radio link reconfiguration prepare in the radio link procedure. Interval Type 1~10000
A timer to RNC wait for the response to radio link deletion request in the radio link procedure. Interval Type 1~10000
A timer to RNC wait for radio link restoration indication in the radio link procedure. Interval Type 1~10000
A timer to RNC wait for the response to radio link setup request in the radio link procedure. Interval Type 1~10000
Uniquely identifying an RNC. Interval Type 0~4095
IP address of the RNC. IP Address Type -
RncPool index. Interval Type 0
RncPool Name. String Type -
Neighboring RNC protocol version. Enumeration Type R99, R4, R5, R6, R7
This parameter specifies the decrease rate alarm report threshold. Interval Type 20~99
This parameter specifies the cause of RRC connection establishment, that is, the value of the Establishment cause IE in the RRC CONNECTION REQUEST message. Enumeration Type ORIGCONVCALLEST, ORIGSTREAMCALLEST, ORIGINTERCALLEST, ORIGBKGCALLEST, ORIGSUBSTRAFFCALLEST, TERMCONVCALLEST, TERMSTREAMCALLEST, TERMINTERCALLEST, TERMBKGCALLEST, EMERGCALLEST, INTERRATCELLRESELEST, INTERRATCELLCHGORDEREST, REGISTEST, DETACHEST, ORIGHIGHPRIORSIGEST, ORIGLOWPRIORSIGEST, CALLREEST, TERMHIGHPRIORSIGEST, TERMLOWPRIORSIGEST, TERMCAUSEUNKNOWN, MBMSCALLEST, DEFAULTEST
The minimum number of RRC connection request Per Spu, the sum of RRC connection request need to be higher than this threshold to arise KPI alarm which type is RRC connection successful ratio. Interval Type 0~65534
Successful RRC connection ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
Wait time in RRC connection reject message, the time period the UE has to wait before repeating the rejected procedure of RRC connection. Interval Type 0~15
A timer used to wait for initial direct transmission. Interval Type 1~10000
A timer used to wait for the Iu release command message in RRC procedure. Interval Type 1~10000
A timer used to wait for the response to paging type 1 in RRC procedure. Interval Type 1~10000
A timer used to retransmit the RRC CONNECTION RELEASE message to UE. Interval Type 1~5000
A timer used to wait for the acknowledgement of radio link control (RLC) completion in RRC procedure. Interval Type 1~3000
A timer to RNC wait for the response to security mode command from UE in security mode procedure. Interval Type 1~10000
A timer used to wait for RRC connection setup complete message from UE in RRC procedure. Interval Type 1~10000
This field indicate whether the AAL2PATH is belong to resource group. Enumeration Type NO, YES
Number of the resource group that the AAL2PATH belongs to. Interval Type 0~119
Number of the resource group that the IP Path belongs to. Interval Type 0~119
Indicating the resource management mode. Enumeration Type SHARE(Share), EXCLUSIVE(Exclusive)
This parameter specifies the resource management mode. If the SHARE mode is adopted, the logical port can be shared by multiple operators. If the EXCLUSIVE mode is adopted, the logical port can be used by only one operator. Enumeration Type SHARE, EXCLUSIVE
This parameter specifies the reason to lock the CM control rights. Enumeration Type COMMISSIONING(Commissioning), UPGRADE(Upgrade), RESTORE(Restore)
No-Response Timer. Interval Type 1200~20000
CN reset type.
1. ALL_NODES: resetting all CN nodes.
2. BY_CNID: resetting the CN nodes specified by
[CN ID]. Enumeration Type ALL_NODES, BY_CNID
ON is open this function and OFF is not. Enumeration Type OFF, ON
The times of resending the reset message to CN after the response is not received upon the expiry of the timer. Interval Type 0~5
RNC Type to be reset. Enumeration Type ALL_RNC, SINGLE_RNC
Reserved parameter 1. Bit Field Type RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVDBIT1_BIT5, RSVDBIT1_BIT6, RSVDBIT1_BIT7, RSVDBIT1_BIT8, RSVDBIT1_BIT9, RSVDBIT1_BIT10, RSVDBIT1_BIT11, RSVDBIT1_BIT12, RSVDBIT1_BIT13, RSVDBIT1_BIT14, RSVDBIT1_BIT15, RSVDBIT1_BIT16, RSVDBIT1_BIT17, RSVDBIT1_BIT18, RSVDBIT1_BIT19, RSVDBIT1_BIT20, RSVDBIT1_BIT21, RSVDBIT1_BIT22, RSVDBIT1_BIT23, RSVDBIT1_BIT24, RSVDBIT1_BIT25, RSVDBIT1_BIT26, RSVDBIT1_BIT27, RSVDBIT1_BIT28, RSVDBIT1_BIT29, RSVDBIT1_BIT30, RSVDBIT1_BIT31, RSVDBIT1_BIT32
Reserved parameter 1. Bit Field Type RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVDBIT1_BIT5, RSVDBIT1_BIT6, RSVDBIT1_BIT7, RSVDBIT1_BIT8, RSVDBIT1_BIT9, RSVDBIT1_BIT10, RSVDBIT1_BIT11, RSVDBIT1_BIT12, RSVDBIT1_BIT13, RSVDBIT1_BIT14, RSVDBIT1_BIT15, RSVDBIT1_BIT16, RSVDBIT1_BIT17, RSVDBIT1_BIT18, RSVDBIT1_BIT19, RSVDBIT1_BIT20, RSVDBIT1_BIT21, RSVDBIT1_BIT22, RSVDBIT1_BIT23, RSVDBIT1_BIT24, RSVDBIT1_BIT25, RSVDBIT1_BIT26, RSVDBIT1_BIT27, RSVDBIT1_BIT28, RSVDBIT1_BIT29, RSVDBIT1_BIT30, RSVDBIT1_BIT31, RSVDBIT1_BIT32
Reserved parameter 1. Bit Field Type RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVDBIT1_BIT5, RSVDBIT1_BIT6, RSVDBIT1_BIT7, RSVDBIT1_BIT8, RSVDBIT1_BIT9, RSVDBIT1_BIT10, RSVDBIT1_BIT11, RSVDBIT1_BIT12, RSVDBIT1_BIT13, RSVDBIT1_BIT14, RSVDBIT1_BIT15, RSVDBIT1_BIT16, RSVDBIT1_BIT17, RSVDBIT1_BIT18, RSVDBIT1_BIT19, RSVDBIT1_BIT20, RSVDBIT1_BIT21, RSVDBIT1_BIT22, RSVDBIT1_BIT23, RSVDBIT1_BIT24, RSVDBIT1_BIT25, RSVDBIT1_BIT26, RSVDBIT1_BIT27, RSVDBIT1_BIT28, RSVDBIT1_BIT29, RSVDBIT1_BIT30, RSVDBIT1_BIT31, RSVDBIT1_BIT32
This parameter specifies parameter 1 reserved for the future use. Enumeration Type OFF, ON
The algorithms with the above values represent are as
follow:
RsvdBit1: Control RTWP Anti-interfence algorithm
RsvdBit2~RsvdBit16:Reserved Switch
If RsvdBit1 is selected, the corresponding algorithms
will be enabled; otherwise, disabled.
Bit Field Type RsvdBit1(Reserved Switch 1), RsvdBit2(Reserved Switch 2), RsvdBit3(Reserved Switch 3), RsvdBit4(Reserved Switch 4), RsvdBit5(Reserved Switch 5), RsvdBit6(Reserved Switch 6), RsvdBit7(Reserved Switch 7), RsvdBit8(Reserved Switch 8), RsvdBit9(Reserved Switch 9), RsvdBit10(Reserved Switch 10), RsvdBit11(Reserved Switch 11), RsvdBit12(Reserved Switch 12), RsvdBit13(Reserved Switch 13), RsvdBit14(Reserved Switch 14), RsvdBit15(Reserved Switch 15), RsvdBit16(Reserved Switch 16)
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 10 reserved for the future use. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
Reserved parameter 2. Interval Type 0~4294967295
Reserved parameter 2. Interval Type 0~4294967295
This parameter specifies parameter 2 reserved for the future use. Enumeration Type OFF, ON
Reserved parameter 2. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 3 reserved for the future use. Enumeration Type OFF, ON
Reserved parameter 3. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 4 reserved for the future use. Enumeration Type OFF, ON
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 5 reserved for the future use. Enumeration Type OFF, ON
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 6 reserved for the future use. Enumeration Type OFF, ON
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 7 reserved for the future use. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 8 reserved for the future use. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies parameter 9 reserved for the future use. Interval Type 0~4294967295
This parameter is saved for the coming usage. Interval Type 0~4294967295
This parameter specifies the revertive type of the MSP function. Enumeration Type NON-REVERTIVE, REVERTIVE
Different types of M3UA local entities must have different routing contexts. Interval Type 0~4294967295
The rate of RTCP bandwidth by the Iu CS bandwidth. For example if this value is 1, it expresses that the allocated RTCP path bandwidth is 1% of the RTP path bandwidth. Interval Type 1~5
Timer for state transition from CPC_HSPA to E_FACH of real-time services, used to detect whether a real-time service UE that adopts the CPC technology in CELL_DCH(with CPC_HSPA) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model. Interval Type 1~65535
Timer for state transition from CPC_HSPA to FACH of real-time services, used to detect whether a real-time service UE that adopts the CPC technology in CELL_DCH(with CPC_HSPA) state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model. Interval Type 1~65535
Whether to support RTCP function.It is valid only if the Iu interface is CS domain and the transtype is IP. When RTCP switch is on, it takes statistics of the total lost number of RTP packets, the loss rate of RTP packets, the Round Trip Time (RTT), the average delay jitter of packets received over a single IP path via RTCP packets. Analyze the performance statistic of the above objects, overall evaluation the situation of the network. Enumeration Type OFF, ON
This parameter specifies the destination IP address. IP Address Type -
This parameter specifies the mask of the destination address. IP Address Type -
Timer for state transition from DCH or HSPA to E_FACH of real-time services, used to detect whether a real-time service UE in CELL_DCH state is in stable low activity state. The too small parameter cannot probably confirm that a UE is in relatively stable low activity state, but the too big will waste the dedicated channel resource. This parameter should be set based on the real-time service model. Interval Type 1~65535
Timer for state transition from DCH or HSDPA to FACH of real-time services, used to check whether the UE in the CELL_DCH state with real-time services is in the stable low activity state. If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model. Interval Type 1~65535
Pending time after the traffic volume event 4B is reported. This parameter is used to prevent too many traffic volume events 4B being reported. Enumeration Type D250, D500, D1000, D2000, D4000, D8000, D16000
This parameter is used to check whether the UE in the low activity state. If the UE is on DCH or HSPA channel, the low activity counter increases by 1 every time traffic volume event 4B is reported. Enumeration Type D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from E_FACH to HSPA with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from E_FACH to HSPA with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from E_FACH to DCH or HSPA. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from E_FACH to DCH or HSPA. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from FACH to HSPA with CPC technology. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from FACH to HSPA with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from FACH to DCH or HSPA. If the value of this parameter is too high, congestion may occur over the common channel. Enumeration Type D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from FACH to DCH or HSPA. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO alpha value] must be less than the [RTO beta value]. When [RTO beta value] is a constant, the larger this parameter is set, the less sensitive it becomes to the link delay. Interval Type 0~100
It is used to calculate the round-trip time of the protocol stack and the RTO value. The [RTO beta value] must be greater than the [RTO alpha value]. When [RTO alpha value] is a constant, the larger this parameter is set, the more sensitive it becomes to the link delay. Interval Type 0~100
When [RTO max value] and [RTO max value] are constants, the larger this parameter is set, the longer the time spent in checking if the link works well. Interval Type 1000~60000
When [RTO max value] is a constant, the larger this parameter is set, the longer the time spent in checking if the link works well. Interval Type 1000~60000
When [RTO max value] is a constant, the larger this parameter is set, the longer the time spent in checking if the link works well. Interval Type 1000~60000
Route index, a logical number of the route. Interval Type 0~4294967295
This parameter specifies the rate up step of the logical port. Interval Type 0~1000
This parameter specifies the period of adjusting the rate up step. Interval Type 1~100
This parameter specifies the backward bandwidth of the logical port. Interval Type 10~2810
Backward bandwidth of the IP path. Interval Type 1~3000000
This parameter is valid only when Transport Resource Group Type is ATM or Transport Resource Group Type is IP and Bandwidth Mode is FULL_DUPLEX. Interval Type 0~4000000
Receive traffic record index of the SAAL link. Interval Type 100~1999
When the time difference between the time when the
UE receives a physical frame from the downlink and
the time when the UE transmits the physical frame to
the uplink becomes greater than a certain threshold,
the event 6F will be triggered.
This parameter is to optimize the power control
performance within a time slot, that is, to guarantee
that the power control within a time slot is
implemented based on all links in the active set. The
ideal UE Rx-Tx time difference should be 1024 chips.
This parameter should not be too close to 1024.
Otherwise, the radio link may be removed
prematurely.
It is recommended that the parameter be set within the
range 1024~1280.
For the definition and its related details, refer to the
3GPP TS 25.331 protocol.
Interval Type 768~1280
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes smaller than a certain threshold, the event 6G will be triggered. This parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control within a time slot is implemented based on all links in the active set. The ideal UE Rx-Tx time difference should be 1024 chips. This parameter should not be too close to 1024. Otherwise, the radio link may be removed prematurely. It is recommended that the parameter be set within the range 768~1024. For the definition and its related details, refer to the 3GPP TS 25.331 protocol. Interval Type 768~1280
No. of the SAAL link that bears the CCP.For detailed information of this parameter, refer to 3GPP TS 25.430. Interval Type 0~699
No. of the SAAL link.For detailed information of this parameter, refer to 3GPP TS 25.430. Interval Type 0~699
This parameter specifies the number of an SAAL link carried on the VCL. Interval Type 0~699
Number of the SAAL link bearing the AAL2 signaling to the adjacent node. Interval Type 0~699
Interface type of the SAAL link.The interface type of links on Iub is UNI. The interface type of links on Iu and Iur is NNI. Enumeration Type UNI, NNI
SAAL link connection timer. It is a protection timer waiting for a SAAL response after a link setup request is sent to SAAL. Interval Type 35000~120000
PLMN-Id, LAC and SAC together compose the Service Area ID (SAI). The SAI is used to define an area composed of one or more cells in the same location area. This area is called service area, which indicates the location of a UE to the CN. This parameter is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003. Interval Type 0~65535
Indicating whether the Iub interface supports satellite transmission. Enumeration Type TRUE(True), FALSE(False)
Timing offset between the SCCPCH and PCCPCH in
the cell. As defined by the 25.211 protocol, the PICH
timing is 7680 chips prior to its corresponding
SCCPCH frame timing. If the offset of the SCCPCH
timing from the PCCPCH timing is smaller than 30 (x
256 chips), the corresponding CFN decreases by 1.
Then, the difference between the PICH CFN and the
corresponding SCCPCH CFN is 2. However, in the
25.435 protocol, the PI information and paging
message are transmitted with two consecutive CFNs.
In the RNC, the PI information and paging messages
are also transmitted with two consecutive CFNs
irrespective of the chip offset. Therefore, the two
protocols conflict with each other in this aspect. To
avoid the compatibility problem, it is recommended
that the SCCPCH timing carrying the PCH transport
channel be set to between 31 and 149. For detailed
information of this parameter, refer to 3GPP TS
25.433 and 3GPP TS 25.211.
0 : 0chip,
1: 256chip,
2: 512chips,
...,
149 : 38144chips.
Interval Type 0~149
List Type. Enumeration Type ByRack, ByNodeBId, ByCellId
This parameter specifies the average rate. Physical unit: cell/s or kbit/s. Interval Type 30~70754
Scrambling code of the SCCPCH. 0: primary scrambling code; 1~15: secondary scrambling code. Note: This parameter must be set to the primary scrambling code for the SCCPCH bearing the PCH. It can be set to the primary scrambling code or secondary scrambling code for the SCCPCH that does not carry the PCH. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 0~15
This parameter specifies the state of the scramble switch. The setting of this parameter should be consistent with that at the peer end. Enumeration Type ON, OFF
Number of the SCTP link. Interval Type 0~599
This parameter specifies the start date of the DST. Interval Type 1~31
This parameter specifies whether the SD is enabled. Enumeration Type DISABLE, ENABLE
This parameter specifies the priority of the SF event and the SD event. Enumeration Type HIGH, LOW
Seed of the pseudo-random sequence generator. It can prevent idle period of different NodeBs from overlapping. Interval Type 0~63
This parameter specifies the type of the NodeB detect. Enumeration Type SINGLE(Single NodeB), ALL(ALL NodeB)
This parameter indicates whether the MBMS service is released first or user first when the overload occurs. Enumeration Type MBMS_REL(MBMS service), USER_REL(UE)
This parameter specifies the IP address to be accessed by the FTP client. IP Address Type -
This parameter specifies the server name for CHAP authentication during PPP or MLPPP link negotiation. String Type -
This parameter specifies the rate of the MBMS service carried on the common channel. For details of this parameter, refer to the 3GPP TS 25.346. Enumeration Type D16, D32, D64, D128, D256
This parameter specifies whether the service
differential DRD algorithm will be applied.
- ON: The service differential DRD algorithm will be
applied.(If cell-level DRD parameters are configured,
the status of cell level Service differential drd switch
should also be considered.)
- OFF: The service differential DRD algorithm will
not be applied.
Enumeration Type ON, OFF
Uniquely identifying a MBMS service in the PLMN. Interval Type 0~4294967295
Indicating whether to support CS, PS or both domains. Enumeration Type SUPPORT_CS, SUPPORT_PS, SUPPORT_CS_AND_PS
This parameter specifies the traffic class of the MBMS service carried on the common channel. For details of this parameter, refer to the 3GPP TS 25.346. Enumeration Type STREAMING, BACKGROUND
This parameter is valid only when Adjacent Node Type is IUPS.NO means the node is GGSN, and GGSN need not to configure dpx parameter. Enumeration Type NO, YES
Numbers of incoming calls to be shared when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out threshold and overload threshold, and number of incoming calls in each second reaches the threshold, new arrival call attempts will be shared out to other SPU. Interval Type 0~255
This parameter specifies the sharing type of a NodeB. The value "DEDICATED" indicates that all cells of the NodeB belong to one operator. The value "RANSHARING" indicates that cells of the NodeB can belong to different operators, but a cell only belongs to one operator. The value "MOCN"indicates that every cell of the NodeB can belong to multi-operators. Enumeration Type DEDICATED(Dedicated), RANSHARING(RAN Sharing), MOCN(MOCN)
Inter-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this parameter, the UE starts the inter-system measurement so that better cells can be selected. For details, refer to 3GPP TS 25.304. Interval Type -53~45
This parameter specifies the handover attribute. If the
SERVICE_HO_BASED_ON_RNC_SWITCH is on,
the handover setting of this parameter is applied.
Otherwise, the handover setting assigned by the CN is
applied.
- HO_TO_GSM_SHOULD_BE_PERFORM:
Handover to the 2G network is performed so long as
2G signals are available.
- HO_TO_GSM_SHOULD_NOT_BE_PERFORM:
Handover to the 2G network is performed when 3G
signals are weak but 2G signals are strong.
- HO_TO_GSM_SHALL_NOT_BE_PERFORM:
Handover to the 2G network is not performed even if
3G signals are weak but 2G signals are strong.
Enumeration Type HO_TO_GSM_SHOULD_BE_PERFORM, HO_TO_GSM_SHOULD_NOT_BE_PERFORM, HO_TO_GSM_SHALL_NOT_BE_PERFORM
This parameter specifies the threshold number of the
soft handover failures. This parameter determines the
reporting times of the events from the cell that fails to
join the active set in soft handover, to trigger the rate
reduction of the active set and the attempt to join the
active set. The smaller the value of this parameter, the
easier it is for the cell that fails to join the active set in
the load based soft handover to join the active set
through the soft handover rate reduction strategy, but
the easier it is to trigger the rate reduction of the
active set and thus to affect the use of services.
Note that this parameter need be considered in
combination with the rate reduction evaluation period,
and the reporting intervals of event 1A and 1C.
Otherwise, the reports cannot reach the required times
to trigger rate reduction during the rate reduction
evaluation period.
Interval Type 0~63
This parameter specifies the maximum evaluation period of the soft handover failure. When the rate reduction evaluation is performed on a cell that fails to join the active set, the evaluation timer is started. If the cell cannot fulfill the condition of rate reduction before the timer expires, the evaluation and rate reduction retry on the cell will not be performed. The larger the value of the parameter, the greater the possibility that the target cell joins the active set. But only three parallel soft handover rate reduction evaluation processes are allowed on the RNC. The larger the value of this parameter, the less the failure cells that the RNC can handle. Interval Type 0~120
When the RNC receives events 1A, 1C and 1D, the
target cell can be added to the active set only when
CPICH Ec/No of the target cell is higher than this
absolute threshold.
The purpose for setting this parameter is as follows:
The current events of soft handovers are defined on
the basis of relative thresholds and have no
requirement for the absolute quality. If the signal
quality of added cells is too poor, the general quality
of the active set cannot be obviously improved, but
more downlink resources are occupied and more TPC
errors are caused, and the soft handover performance
is worsened. Therefore, there should be a baseline for
the quality of the radio links to be added.
As for the impact on network performance:
Adjust this parameter according to the Ec/Io that the
cell soft handover area reaches as expected at network
planning. The larger this parameter is, the more
difficult it is for the neighboring cells to join in the
active set, but the service quality of the joining cell
can be ensured. The smaller this parameter is, the
easier it is for the neighboring cells to join in the
active set, but the service quality of the cell cannot be
restricted if the value of this parameter is excessively
low.
Interval Type -24~0
Indicating whether to trigger soft handover cross the
Iur interface between the RNC and the neighboring
RNC:
1) CS_SHO_SWITCH. Indicating whether to trigger
hard handover for CS cross the Iur interface.
2) HSPA_SHO_SWITCH. Indicating whether to
trigger hard handover for HSPA cross the Iur
interface.
3) NON_HSPA_SHO_SWITCH. Indicating whether
to trigger hard handover for PS(R99) cross the Iur
interface.
Bit Field Type CS_SHO_SWITCH, HSPA_SHO_SWITCH, NON_HSPA_SHO_SWITCH
Flag of whether to include this neighboring
relationship in the System Information Block 11
(SIB11).
This parameter indicates whether the neighboring cell
information is delivered in SIB11. FALSE: not to
include the neighboring information in the SIB11.
TRUE: to include the neighboring information in the
SIB11.
Enumeration Type FALSE(Do not send), TRUE(Send)
Flag of whether to include this neighboring
relationship in the System Information Block 12
(SIB12).
This parameter indicates whether the neighboring cell
information is delivered in SIB12. FALSE: not to
include the neighboring information in the SIB12.
TRUE: to include the neighboring information in the
SIB12.
Enumeration Type FALSE(Do not send), TRUE(Send)
Determine whether some system information blocks are broadcast in this cell. If the corresponding system information block is selected, then send this system information block in this cell. Bit Field Type SIB2, SIB4, SIB12, SIB18, SIB11BIS
This parameter specifies the channel type and bit rate
for RRC connection establishment.
- FACH: The RRC connection is set up on the
common channel.
- DCH_3.4K_SIGNALLING: The RRC connection is
set up on the 3.4 kbit/s dedicated channel.
- DCH_6.8K_SIGNALLING: The RRC connection is
set up on the 6.8 kbit/s dedicated channel.
- DCH_13.6K_SIGNALLING: The RRC connection
is set up on the 13.6 kbit/s dedicated channel.
- DCH_27.2K_SIGNALLING: The RRC connection
is set up on the 27.2 kbit/s dedicated channel.
Enumeration Type FACH, DCH_3.4K_SIGNALLING, DCH_6.8K_SIGNALLING, DCH_13.6K_SIGNALLING, DCH_27.2K_SIGNALLING
Index of the signalling link set. Interval Type 0~118
M3UA link code in SPU subsystem. Interval Type 0~15
Indicating whether the FACH bears signalling. Enumeration Type FALSE, TRUE
Signalling link code. Interval Type 0~15
Maximum rate of the wideband AMR speech service for silver users. Enumeration Type WBAMR_BITRATE_6.60K, WBAMR_BITRATE_8.85K, WBAMR_BITRATE_12.65K, WBAMR_BITRATE_14.25K, WBAMR_BITRATE_15.85K, WBAMR_BITRATE_18.25K, WBAMR_BITRATE_19.85K, WBAMR_BITRATE_23.05K, WBAMR_BITRATE_23.85K
Maximum rate of the narrowband AMR speech service for silver users. Enumeration Type NBAMR_BITRATE_4.75K, NBAMR_BITRATE_5.15K, NBAMR_BITRATE_5.90K, NBAMR_BITRATE_6.70K, NBAMR_BITRATE_7.40K, NBAMR_BITRATE_7.95K, NBAMR_BITRATE_10.20K, NBAMR_BITRATE_12.20K
This parameter specifies the DL maximum bit rate of signal for PS domain user. Enumeration Type D3.4, D13.6, D27.2
This parameter specifies the UL maximum bit rate of signal for PS domain user. Enumeration Type D3.4, D13.6, D27.2
This parameter specifies the source IP address. IP Address Type -
IMS SRB service downlink factor. Interval Type 0~100
IMS SRB primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
IMS Signal bearing primary path load threshold. Interval Type 0~100
IMS SRB secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
IMS Signal primary secondary path load ratio threshold. Interval Type 0~100
IMS SRB service uplink factor. Interval Type 0~100
The UE does not start the inter-RAT measurement if it detects that the quality of the serving cell is higher than this threshold. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type -16~10
This parameter defines the slot format used by the SCCPCH. The configuration of this parameter is relevant to the SF, pilot bit, and TFCI of the SCCPCH. For detailed information of this parameter, refer to 3GPP TS 25.433 and 3GPP TS 25.211. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17
Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3
Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3
Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3
Sequence number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Interval Type 0~3
Number of available PRACH slot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Enumeration Type D1, D2, D3, D4
The signalling route mask is used for sharing loads between signalling routes. Suppose that the number of 1s in the value is expressed as n. Then the maximum number of the routes for load sharing is 2^n. For example, B0000 indicates that only one route can be used for load sharing. B0001 and B1000 indicate that at most two routes can be used for load sharing while the others cannot. This mask AND the value of [Signalling link mask] specified by ADD MTP3LKS must be zero. Enumeration Type B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
This parameter specifies the type of the start date. DATE indicates that the DST starts from a certain day. WEEK indicates that the DST starts from a certain week. DATEWEEK indicates that the DST starts from a certain day in a certain week. Enumeration Type DATE(Input with date), WEEK(Input with week), DATEWEEK(Input with date and week)
Method of positioning the UE. Bit Field Type CELLID_CENTER, CELLID_RTT, OTDOA, AGPS
This parameter specifies whether the alarm reporting for smoke is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the start month of the DST. Enumeration Type JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
RSPU slot No. Interval Type 0,2,4,8,10
The Slot No. Interval Type 0,2,4,8,10
This parameter specifies the number of the slot where the SPU is located. Interval Type 0,2,4,6,8,10
The Slot No. Interval Type 0,2,4,8,10
This parameter specifies the number of a slot. Interval Type 0,2,4,6,8,10,12,14,16,18,20,22,24,26
This parameter specifies the number of the slot where the SPUa is located. Interval Type 0,2,4,8,10
This parameter specifies the number of a slot. Interval Type 0~27
This parameter specifies the number of a slot. Interval Type 14~27
This parameter specifies the number of a slot. Interval Type 14~27
This parameter specifies the number of a slot where the board is located. Interval Type 0~27
This parameter specifies the number of a slot. Interval Type 14~27
This parameter specifies the number of a slot. Interval Type 14~27
This parameter specifies the number of a slot. Interval Type 14,16,18,20,22,24,26
This parameter specifies the number of a slot. Interval Type 0~5,8~27
This parameter specifies the number of a slot. For the logical uninhibition, the value range of "Slot No." is {{0},{2},{4},{8~27}}. For the physical uninhibition, the value range of "Slot No." is {{0~5},{8~27}}. Interval Type 0~5,8~27
This parameter specifies the number of a slot. Interval Type 14~27
This parameter specifies the number of a slot. Interval Type 14~27
This parameter indicates the number of the slot where the board is located. The board refers to the one on which the command is executed. Interval Type 29,31
This parameter specifies the slot that holds the SPUa. Interval Type 0,2,4,8,10
Number of the SPU slot where the SAAL link is terminated. Interval Type 0,2,4,8,10
This parameter is valid only when Adjacent Node Type is UNI_AAL2SWITCH.Slot number of the SAAL link bearing the AAL2 signaling to the adjacent node. Interval Type 0,2,4,8,10
Number of the slot where the SCTP link is terminated. Interval Type 0,2,4,8,10
Number of the slot where the SPU controlling the M3UA link is located. Interval Type 0,2,4,8,10
Slot Number of PHB map to DSCP. Interval Type 14~27
Number of the slot where the SPU subsystem controlling the MTP3-B link is located. Interval Type 0,2,4,8,10
Sharing Network Area Code. Interval Type 0~65535
Indicating whether the SNAC need be configured.
TRUE: The SNAC need be configured.
FALSE: The SNAC need not be configured.UE can
access any cell of the PLMN. Enumeration Type TRUE, FALSE
When it is set to ON, the RNC sends UMTS cell load information to the GSM during the non-coverage based system relocation in or out process. When it is set to OFF, the RNC does not send UMTS cell load information to the GSM during the system relocation in or out process. This parameter is designed for the UMTS network to cooperate with the GSM network. When the UE is handed over from the UMTS network to the GSM network, the RNC normalizes the load information of the best cell and sends it to the GSM network. Then, the GSM network determines whether to accept or reject the handover request.This switch is only effective in CS domain,the RNC does not send UMTS cell load information to the GSM in PS domain. Enumeration Type OFF, ON
The OSP should be input in hexadecimal format and cannot be 0. In addition, it should be allocated in the SS7 network and cannot be repeated. If SPC is BIT14 code, the value range is H'1~H'3FFF(1~16383).f SPC is BIT16 code, the value range is H'1~H'FFFF(1~65535). If SPC is BIT24 code, the value range is H'1~H'FFFFFF(1~16777215). Interval Type 1~16777215
Indicating the number of bits of the OSP code. BIT14 means 14-bit code,BIT16 means 16-bit code,and BIT24 represents 24-bit code. Enumeration Type BIT14, BIT16, BIT24
The OSP should be input in divided number format. In addition, it should be allocated in the SS7 network and cannot be repeated. String Type -
Indicating whether the UE speed estimation is
allowed in this cell.
Value ON indicates that the UE speed estimation is
allowed in this cell.
Value OFF indicates that the UE speed estimation is
not allowed in this cell.
The UE speed estimation cannot be triggered even if
this switch is enabled in either of the following cases:
-The cell is not configured as a HCS cell by ADD
CELLHCS or MOD CELLHCS.
-The algorithm switch for the RNC-oriented UE speed
estimation is not enabled by SET
CORRMALGOSWITCH.
Enumeration Type ON, OFF
Signal point data format. Enumeration Type WNF, DNF
This parameter specifies the transmission rate over the FE port. Enumeration Type 10M, 100M
For a high-mobility UE, multiples this parameter by its reselection delay to reduce the reselection delay of the UE. This parameter can be set to 10 for middle-speed UE, which means no influence upon reselection delay time. This parameter is not configured when its value is 255. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type 0~10,255
This parameter identifies a group of cells that have specific capabilities for four service types: R99 real-time services, R99 non-real-time services, HSPA services, and other services. Interval Type 1~8
This parameter indicates the scheduling priority. The value 15 indicates the highest priority and the value 0 indicates the lowest. Interval Type 0~15
This parameter specifies the number of the source port of the IP loopback test. Interval Type 1024~3584
It is used to decide whether the cell load level is
"Heavy" or not. It is denoted by the ratio of NodeB
TX power to the maximum TX power.
If the load of a cell is equal to or higher than this
threshold, the load level of this cell is heavy.
If the load level of a cell is heavy, the PUC algorithm
will configure selection/reselection parameters for this
cell to lead the UE camping on this cell to reselect
another inter-frequency neighboring cell with light
load.
Interval Type 0~100
Hysteresis used to determine the cell load level. It is denoted by the ratio of NodeB TX power to the maximum TX power. It is used to avoid the unnecessary ping-pong effect of a cell between two load levels due to tiny load change. For detailed information of this parameter, refer to 3GPP TS 25.304. Interval Type 0~100
It is used to decide whether the cell load level is
"Light" or not. It is denoted by the ratio of NodeB TX
power to the maximum TX power.
If the load of a cell is equal to or lower than this
threshold, the load level of this cell is light.
If the load level of a cell is light, the PUC algorithm
will configure selection/reselection parameters for this
cell to lead the UE to reselect this cell rather than the
previous inter-frequency neighboring cell with heavy
load.
Interval Type 0~100
The threshold used by SPU process system. When the equivalent user number of this SPU system is over this threshold, latter calls will be transferred to other SPU process system until equivalent user number is bellow this SPU traffic share threshold. Interval Type 40~100
This parameter specifies the channel type of SRB.
- DCH: Both uplink and downlink are preferably
carried on DCH.
- HSDPA: Uplink is preferably carried on DCH, and
downlink is preferably carried on HS-DSCH.
- HSPA: Uplink is preferably carried on E-DCH, and
downlink is preferably carried on HS-DSCH.
Enumeration Type DCH(UL_DCH,DL_DCH), HSDPA(UL_DCH,DL_HSDSCH), HSPA(UL_EDCH,DL_HSDSCH)
This parameter specifies whether [SRB channel type]
is valid in the RRC connection setup procedure.
- TRUE: [SRB channel type] is valid in the RRC
connection setup procedure and other procedures.
- FALSE: [SRB channel type] is invalid in the RRC
connection setup procedure but valid in other
procedures.
Enumeration Type TRUE, FALSE
SRB service downlink factor. Interval Type 0~100
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends SRB data on the Iub interface. Interval Type 1~1000
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends SRB data on the Iub interface. Interval Type 1~2000
SRB primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
Signal bearing primary path load threshold. Interval Type 0~100
SRB secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
Signal primary secondary path load ratio threshold. Interval Type 0~100
SRB service uplink factor. Interval Type 0~100
This parameter specifies the source end of timeslot cross connection, corresponding to the electrical port of the board. Interval Type 0~31
This parameter specifies the priority level of the clock source. Interval Type 1~4
This parameter specifies the type of the clock source. Interval Type 0~4
This parameter specifies the source IP address of the flow. IP Address Type -
This parameter specifies the ID of a local MEP. Interval Type 1~100
This parameter specifies the type of the clock source. Enumeration Type BITS1-2MHZ, BITS2-2MHZ, BITS1-2MBPS, BITS2-2MBPS, GPS, 8KHZ, LINE1_8KHZ, LINE2_8KHZ, BITS1-T1BPS, BITS2-T1BPS
This parameter specifies the number of the source end of timeslot cross connection. Enumeration Type TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), TS30(Time_slot_30), TS31(Time_slot_31)
Timer REPEAT_SREC.Frequency at which ER is allowed to be received. If the second ER message is received before the timer expires, the link is released. Interval Type 45~90
RBS managing the NodeB. Interval Type 0~5
This parameter specifies the number of the RBS or RSS. Interval Type 0~5
This parameter specifies the number of a subrack. Interval Type 1~5
This parameter specifies the number of a subrack. Interval Type 0~5
This parameter specifies the number of the RBS subrack. Interval Type 1~5
This parameter specifies the number of a subrack. Interval Type 0~5
Number of the subrack where the SAAL link is terminated. Interval Type 0~5
This parameter is valid only when Adjacent Node Type is UNI_AAL2SWITCH.Subrack number of the SAAL link bearing the AAL2 signaling to the adjacent node. Interval Type 0~5
Number of the subrack where the SCTP link is terminated. Interval Type 0~5
Number of the subrack. Interval Type 0~5
Number of the SUBRACK where the SPU controlling the M3UA link is located. Interval Type 0~5
No. of the WRBS at which the PHB map to DSCP. Interval Type 0~5
Number of the subrack where the SPU subsystem controlling the MTP3-B link is located. Interval Type 0~5
This parameter specifies the name of a WRBS. String Type -
When the parameter is set to YES, QoS control for DL BE services is based on the TCP and RLC retransmission. When the parameter is set to NO, QoS control for DL BE services is based on the TCP. In both situations, QoS control is not performed across the Iur interface. Enumeration Type NO, YES
SRNS relocation-allowed traffic type. This parameter determines the bearing policy over the Iur interface. If the parameter is set to RT, only the real-time service can trigger the static relocation; if the parameter is set to NRT, only the non-real-time service can trigger the static relocation; if the parameter is set to ALL, all services can trigger the static relocation. Enumeration Type RT(Real time service), NRT(Non real time service), ALL(All service)
When [Measurement transfer delay by FP Node
synchronization between SRNC and DRNC
]+[Estimated non-measurement delay offset] >
[transfer delay provided by the Qos of the current
traffic], the relocation will be triggered. The value of
this parameter should be set according to the time
delay concerned requirements of the most common
services over the Iur interface. If the value is too
small, unnecessary relocation will occur; if the value
is too large, the QoS of the services over the Iur
interface will be affected.
The transfer delay provided by the Qos of the current
traffic is the parameter set at the CN and is notified to
the RNC through an RAB ASSIGNMENT
REQUEST message.
Interval Type 0~400
SRNS relocation expiry time. In order to avoid ping-pong relocation, the user, if successfully relocated, is not allowed to relocate again in the specified time of the parameter. Interval Type 1~255
Time interval between two SRNS relocations based on Iur resource optimization. For each time interval, the RNC specifies several UEs to perform the relocation based on Iur resource optimization. The parameter should be set according to the the time interval of the Iur source congestion report. The difference between the previous two values cannot be too large. Individually changing a parameter will cause the time difference in the congestion report and the relocation triggering, and thus the algorithm cannot be efficiently performed. Interval Type 1~100
If SRNSR_DSCR_SEPRAT_DUR_SWITCH of [SrnsrSwitch] in SET CORRMALGOSWITCH is on, after the separation of the SRNC and the CRNC, a timer starts. After the time is expired, the SRNS relocation is triggered. This parameter determines the number of UEs over the Iur interface. If this parameter is set too large, it will cause too much unnecessary occupied Iur resources; if the parameter is set too small, ping-pong relocation may occur. Interval Type 1~255
SRNSR algorithm switch.
1) SRNSR_DSCR_IUR_RESRCE_SWITCH: When
the switch is on, relocation for transmission
optimization over the Iur interface is allowed. When
there is congestion over the Iur interface, the UE may
be selected to initiate relocation or DSCR if the UE
has only a radio link over the Iur interface and the link
have the same attributes as the congested link. Based
on DSCRInd of ADD NRNC, the RNC decides
whether to initiate relocation or DSCR. When the
RRC CONN REL message with the cause value
"Directed Signalling Connection re-establishment" is
sent to the UE, the UE initiates RRC reestablishment
and updates the routing area once immediately.
2) SRNSR_DSCR_LOC_SEPRAT_SWITCH: When
the switch is on, the RNC initiates static relocation or
DSCR if the optimal cell and the intra-frequency
neighboring cell of the optimal cell are not on the
SRNC (the SRNC and the CRNC are separated).
Based on DSCRInd of ADD NRNC, the RNC decides
whether to initiate relocation or DSCR.
3) SRNSR_DSCR_PROPG_DELAY_SWITCH:
When the switch is on, the RNC initiates static
relocation or DSCR if the delay over a link cannot
meet QoS requirements (the SRNC and the CRNC are
separated). Thus, delay over the link is reduced on the
network side and the QoS is enhanced. Based on
DSCRInd of ADD NRNC, the RNC decides whether
to initiate relocation or DSCR.
4) SRNSR_DSCR_SEPRAT_DUR_SWITCH: When
the switch is on, the RNC initiates static relocation or
DSCR if the duration of separation between the
SRNC and the CRNC exceeds a configured threshold.
Based on DSCRInd of ADD NRNC, the RNC decides
Bit Field Type SRNSR_DSCR_IUR_RESRCE_SWITCH, SRNSR_DSCR_LOC_SEPRAT_SWITCH, SRNSR_DSCR_PROPG_DELAY_SWITCH, SRNSR_DSCR_SEPRAT_DUR_SWITCH
Relocation trigger time after IURCCH. The relocation occurs after timeout. This parameter determines the probability of the relocation of the Iur common channel based on time separation. The larger the value of this parameter, the more UEs are carried over this Iur channel, and the more Iur resource is occupied; if the value of this parameter is set too small, no UE will be carried on the Iur channel, thus causing the waste of resources. Interval Type 1~65535
UE SRNTI. Interval Type 0~1048575
This parameter specifies the type of the subrack. Enumeration Type RSS, RBS
Offset of the SSCH transmit power from the PCPICH transmit power in a cell. If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the downlink common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered seriously, thus the cell capacity is influenced. Interval Type -350~150
This parameter specifies the threshold for clearing an alarm related to the CPU usage. When the CPU usage is lower than the value of this parameter, the alarm is cleared. Interval Type 20~99
This parameter specifies the threshold for reporting an alarm related to the CPU usage. When the CPU usage is higher than the value of this parameter, the alarm is reported. The value of this parameter must be higher than the value of "CPU occupancy alarm clearance threshold". Interval Type 30~100
This parameter specifies the type of source.
- SPEECH: speech service
- UNKNOWN: non-speech service Enumeration Type SPEECH, UNKNOWN
This parameter specifies the threshold for clearing an alarm related to the DSP usage. When the DSP usage is lower than the value of this parameter, the alarm is cleared. Interval Type 20~99
This parameter specifies the threshold for reporting an alarm related to the DSP usage. When the DSP usage is higher than the value of this parameter, the alarm is reported. The value of this parameter must be higher than the value of "DSP occupancy alarm clearance threshold". Interval Type 30~100
Intra-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this parameter, the UE starts the intra-frequency and inter-frequency measurements so that better cells can be selected. For details, refer to 3GPP TS 25.304. Interval Type -53~45
Threshold for inter-RAT cell reselection. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the inter-RAT cell reselection procedure will be started. This parameter is not configured when its value is 127. This parameter is not configured when its value is 127. The intra-frequency cell reselection has a priority higher than the inter-frequency cell reselection and inter-RAT cell reselection, the intra-frequency cell reselection start threshold should be higher than the inter-frequency cell reselection start threshold and inter-RAT cell reselection start threshold. If the cell reselection threshold is set to a comparatively high value, the UE may frequently start cell reselections, and the battery of the UE may be largely consumed. If the cell reselection threshold is set to a comparatively low value, it is difficult for cell reselections to be started, and the UE may not timely reside in the cells with good quality, affecting the q Interval Type -16~10,127
This parameter specifies the subsystem No. of the SPU/MPU board. Interval Type 0~3
No. of the subsystem to set. Interval Type 0~3
This parameter specifies the start time of the DST. Compound Type HOUR, MIN, SEC
This parameter specifies the service type. CBR and RTVBR are realtime traffic and are usually carried on the control plane on the Iur, Iub, or Iu-CS interface. NRTVBR and UBR are non-realtime traffic and are usually carried on the user plane and control plane of the Iu-PS interface. UBR_PLUS is usually carried on the OM plane. Enumeration Type UBR, CBR, RTVBR, NRTVBR, UBR_PLUS
When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding window. If the number of faulty CRCs exceeds the specified threshold, event 5A is triggered. The length of the sliding window is specified by Statistic Block Number For 5A Event. Interval Type 1~512
When the parameter is set to INACTIVE, the timed GPS frame measurement is not activated. When the parameter is set to ACTIVE, the timed GPS frame measurement is activated. Enumeration Type INACTIVE, ACTIVE
Start time of the first interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN
Start time of the second interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN
Start time of the third interval when the "Cell dynamic shutdown" feature is valid. Compound Type HOUR, MIN
CN protection timer. Interval Type 1000~300000
Protection timer used in case of DSP intermittent at the neighboring RNC. Interval Type 1~300
Maximum length of the STAT PDU list. Interval Type 3~67
Indicating whether the signalling point can perform the signalling transmission function. Enumeration Type OFF, ON
This parameter specifies the mode used to stop the CPU usage test. Enumeration Type MANULSTP(Manual stop), AUTOSTP(Automatic stop)
This parameter specifies the DL maximum bit rate of streaming for PS domain user. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends streaming service data on the Iub interface. Interval Type 1~1000
This parameter specifies the rate threshold of 2ms TTI on the E-DCH for HSUPA streaming service. When the cell capability and UE capability allows 2ms TTI, 2ms TTI on the E-DCH is used if the PS streaming service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384, D608
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends streaming service data on the Iub interface. Interval Type 1~2000
This parameter specifies the UL maximum bit rate of streaming for PS domain user. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
This parameter indicates whether the SCCPCH uses STTD or not. For detailed information of this parameter, refer to 3GPP 25.346. Enumeration Type TRUE, FALSE
This parameter indicates whether STTD TX diversity is supported. Enumeration Type STTD_Supported, STTD_not_Supported
This parameter specifies the logical serial number of a subflow for the typical RAB. A bearer may use several subflows for transmission. For example, AMR speech service may use three traffic subflows, which correspond to three transport channels. Subflows 0, 1, and 2 carry bit flows of classes A, B, and C respectively. For other types of RABs, there is only one subflow. Therefore, the traffic subflow index is set to 0, which corresponds to one transport channel. Interval Type 0~2
Max subframe length. Interval Type 16~1023
This parameter specifies the subnet number of the internal IP address of the RNC. Interval Type 1~126,128~191
Indicating whether the cell supports the CBS service. Enumeration Type TRUE, FALSE
This parameter specifies whether the NodeB allows setting of the downlink DPCH spreading factor to 512. If this parameter is set to TRUE, the NodeB allows setting of the downlink DPCH spreading factor to 512. Enumeration Type FALSE, TRUE
This parameter indicates whether to support the mode change of downlink power control (DPC). Enumeration Type FALSE, TRUE
This parameter specifies whether the NodeB supports
setting of DPC MODE to TRIPLET.
- If this parameter is set to TRUE, the NodeB supports
setting of DPC MODE to TRIPLET.
- If this parameter is set to FALSE, DPC MODE is
always SINGLE. Enumeration Type FALSE, TRUE
Indicating whether to support establishing IUR-CCH between the RNC and the neighboring RNC. Enumeration Type NO, YES
This parameter specifies the board is support backupclock source of the output clock. Enumeration Type NO(NO), YES(YES)
CR supported by CN protocol version. Enumeration Type CR527_SUPPORT, CR527_NOT_SUPPORT, CR528_SUPPORT, CR528_NOT_SUPPORT, CR529_SUPPORT, CR529_NOT_SUPPORT
Identifying whether the inter-RAT cell supports PS HO. TRUE indicates that the inter-RAT cell is able to perform the handover procedure with relocation. FALSE indicates that the cell is unable to do so. Enumeration Type FALSE, TRUE
This parameter specifies whether the NodeB supports PS real-time services being carried on HSDPA. Enumeration Type FALSE, TRUE
Identifying whether the inter-RAT cell supports RIM. (RIM is used to obtain the SI/PSI information of the inter-RAT cell.) For the details of RIM process, refer to the 3GPP TS 25.901 protocol. Enumeration Type FALSE, TRUE
This parameter specifies whether to open or close the port. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the DST start day in a week. Enumeration Type SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday)
This parameter specifies the state of the port switch. Enumeration Type Close, Open
This parameter specifies whether to turn on the BFD protocol switch. Enumeration Type BFD_OFF, BFD_ON
Whether to support Switch3GPP25415CR0125 function.It is valid only if the Iu interface is CS domain. Enumeration Type OFF, ON
This field indicate whether switch back if the primary IP address is available. Enumeration Type NO, YES
This field indicates the association will switch back to primary IP address after receiving appointed number of HBACK. Interval Type 1~254
Set patch switch parameter1. Enumeration Type OFF, ON
Set patch switch parameter10. Interval Type 0~429496729
Set patch switch parameter2. Enumeration Type OFF, ON
Set patch switch parameter3. Enumeration Type OFF, ON
Set patch switch parameter4. Enumeration Type OFF, ON
Set patch switch parameter5. Enumeration Type OFF, ON
Set patch switch parameter6. Enumeration Type OFF, ON
Set patch switch parameter7. Interval Type 0~429496729
Set patch switch parameter8. Interval Type 0~429496729
Set patch switch parameter9. Interval Type 0~429496729
This parameter specifies the DST start week in a month. Enumeration Type FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last)
When call shock control starts, the AMR_RRC number can be accessed per second for system. Interval Type 1~500
This parameter specifies the method to contact the manufacturer. String Type -
This parameter specifies the system description of the RNC production. String Type -
When call shock control starts, the register and 3G->2G reselect number can be accessed per second for system. Interval Type 1~500
A timer to RNC wait for PS RESUME after successful CS InterRAT handover. Interval Type 1~255
This parameter specifies the location of the RNC product. String Type -
This parameter specifies the system ID of the RNC product. String Type -
When call shock control starts, it is the max number of RRC_REJ message. Interval Type 1~500
This parameter specifies the services provided by the RNC product. String Type -
When the RRC REQ total number of one system reach this threshold in period and can't been shared out to other SPU system, the RRC flow control will be triggered. New RRC REQ will be rejected or discarded. Interval Type 1~500
Signalling route set test timer. When the reception of a TFP causes unavailability of a route, this timer is started to regularly check whether the route is recovered. Interval Type 30000~60000
Uninhibit acknowledgement timer. It is a protection timer waiting for an uninhibit acknowledgement message (LUA) from the peer end after an uninhibit message (LUN) is sent to the peer end. Interval Type 800~1500
Force uninhibit timer. It is a protection timer waiting for a force uninhibit acknowledgement message (LUA) from the peer end after a force uninhibit message (LFU) is sent to the peer end. Interval Type 800~1500
Inhibition acknowledgement timer. It is a protection timer waiting for an inhibition acknowledgement message (LIA) from the peer end after an inhibition message (LIN) is sent to the peer end. Interval Type 2000~3000
Link realignment timer. This timer is started when a link fails to be started. The restart of the link is initiated after it expires. Interval Type 800~1500
Time-control changeover timer. When a normal changeover cannot be initiated, services will be changed over to an alternative link after this timer expires to avoid disorder of data. Interval Type 800~1200
Local inhibit test timer. After a local link is inhibited, this timer is started to regularly check the management states at both ends of the link. Interval Type 180000~360000
Remote inhibit test timer. After a remote link is inhibited, this timer is started to regularly check the management states at both ends of the link. Interval Type 180000~360000
Changeover acknowledgement timer. It is a protection timer waiting for an extended changeover acknowledgement message (XCA) from the peer end after an extended changeover order message (XCO) is sent to the peer end. Interval Type 1400~2000
T300 is started when UE sends the RRC CONNECTION REQUEST message. It is stopped when UE receives the RRC CONNECTION SETUP message. RRC CONNECTION REQUEST will be resent upon the expiry of the timer if V300 is lower than or equal to N300, else enter idle mode. Enumeration Type D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
T302 is started after the UE transmits the CELL UPDATE/URA UPDATE message and stopped after the UE receives the CELL UPDATE CONFIRM/URA UPDATE CONFIRM message. CELL UPDATE/URA UPDATE will be resent upon the expiry of the timer if V302 less than or equal to N302; otherwise, the UE will enter idle mode. Protocol default value is 4000. Enumeration Type D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
T304 is started after the UE sends the UE CAPABILITY INFORMATION message and stopped after the UE receives the UE CAPABILITY INFORMATION CONFIRM message. UE CAPABILITY INFORMATION will be resent upon the expiry of the timer if V304 less than or equal N304; otherwise the cell update procedure will be initiated. Protocol default value is 2000. Enumeration Type D100, D200, D400, D1000, D2000
T305 is started after the UE receives CELL UPDATE CONFIRM/URA UPDATE CONFIRM in CELL_FACH, URA_PCH or CELL_PCH state. It is stopped after the UE enters another state. CELL UPDATE will be transmitted upon the expiry of this timer if T307 is not activated and the UE detects "in service area"; otherwise, T307 will be started. Protocol default value is 30. "Infinity" means the cell will not be updated. Enumeration Type INFINITY, D5, D10, D30, D60, D120, D360, D720
T307 is started after T305 has expired and the UE detects "out of service area". It is stopped after the UE detects "in service area". The UE will enter idle mode upon expiry.Protocol default value is 30. Enumeration Type D5, D10, D15, D20, D30, D40, D50
T308 is started after the UE transmits RRC CONNECTION RELEASE COMPLETE. This message will be sent upon the expiry of the Timer if V308 less than or equal to N308, otherwise, the UE will enter idle mode. Protocol default value is 160. Enumeration Type D40, D80, D160, D320
T309 is started after the UE is reselected to a cell belonging to another radio access system in connected mode, or the CELL CHANGE ORDER FROM UTRAN message is received. It is stopped after the UE is successfully connected in the new cell. The UE will continue the connection to UTRAN upon expiry. Protocol default value is 5. Interval Type 1~8
T312 is started after the UE starts to establish a DCH and stopped when the UE detects consecutive N312 "in sync" indications from L1. It indicates physical channel setup failure upon the expiry of the timer. Protocol default value is 1. Interval Type 1~15
T313 is started after the UE detects consecutive N313 "out of sync" indications from L1. T313 is stopped after the UE detects consecutive N315 "in sync" indications from L1.It indicates Radio Link (RL) failure upon expiry. Protocol default value is 3. Interval Type 0~15
T314 is started when the criteria for radio link failure
are fulfilled and only radio bearers (RBs) associated
with T314 exist.T314 is stopped after the Cell Update
procedure has been completed. Protocol default value
is 12.
In case of the RL failure when the UE is in
CELL_DCH state, If the RL cannot be successfully
reconfigured by CELL UPDATE CONFIRM before
the expiry of the corresponding T314 (or T315),
CELL UPDATE will be resent for RL reconfiguration
(this operation relates to T302 and N302). T314
should be set greater than T302*N302. In case of the
expiry of T314, the corresponding service RBs will be
removed.
Enumeration Type D0, D2, D4, D6, D8, D12, D16, D20
T315 is started when the criteria for radio link failure
are fulfilled, and only the radio bearer associated with
T315 exists.T315 is stopped after the Cell Update
procedure has been completed. Protocol default value
is 180.
In case of the RL failure when the UE is in
CELL_DCH state, T315 (or T314) is started and
CELL UPDATE is sent. If the RL cannot be
successfully reconfigured by CELL UPDATE
CONFIRM before the expiry of the corresponding
T315 (or T314), CELL UPDATE will be resent for
RL reconfiguration (this operation relates to T302 and
N302). T315 should be set greater than T302*N302.
In case of the expiry of T315, the corresponding
service RBs will be removed.
Enumeration Type D0, D10, D30, D60, D180, D600, D1200, D1800
T316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.T316 is stopped after the UE detects "in service area".The cell update procedure will be initiated upon the expiry of the timer if "in service area" is detected; otherwise, T317 will be started. The UE will enter CELL_FACH state and initiate cell update procedure when the UE detects "in service area". Protocol default value is 30. Enumeration Type D0, D10, D20, D30, D40, D50, INFINITY
Periodical location update is implemented by MS through the location update procedure. 0: The periodical update procedure is not used. This parameter is valid only when [CN domain ID] is set as CS_DOMAIN. Interval Type 0~255
T381 is started after the RNC send message "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPLETE"(or the response of "ELL UPDATE CONFIRM") and V381 is smaller than N381, RNC resend "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC receive "RRC CONNECTION SETUP COMPLETE"(or the response of "CELL UPDATE CONFIRM"), T381 will be stopped. Default value is 600ms. Enumeration Type D0, D100, D200, D300, D400, D500, D600, D700, D800, D900, D1000, D1200, D1500, D2000
Time-control changeback timer. When a normal changeback cannot be initiated, services will be changed back to a normal link only after this timer expires to avoid disorder of data. Interval Type 800~1200
Changeover acknowledgement first attempt timer. It is a protection timer waiting for a changeback acknowledgement message (CBA) from the peer end after the first changeback declaration (CBD) is sent to the peer end. Interval Type 800~1200
Changeover acknowledgement second attempt timer. It is a protection timer waiting for a changeback acknowledgement message from the peer end after the second changeback declaration (CBD) is sent to the peer end. Interval Type 800~1200
Transmission prohibited inhibition timer. This timer is activated when a transmission prohibited message (TFP) is sent. The TFP will not be sent any more during the running of this timer. Interval Type 800~1200
This parameter specifies the target number of the RLC retransmissions. In the link quality adjust algorithm for E-FACH, When the measured retransmissions are higher than the target number, Ec/N0 should be decreased. Otherwise, Ec/N0 should be increased. Interval Type 1~1000
Threshold of the target frequency for triggering inter-
frequency measurement with measurement quantity of
Ec/No for CS domain services.
For CS domain services, if the value of [Inter-
frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions for triggering event 2B can be
met only when the quality of the target frequency is
higher than this threshold. If the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-frequency handovers at the RNC.
To set this parameter, you need to consider the
following factors:
The cell signal quality of the target frequency is better
and can meet the coverage requirements of the current
services.
After handover, to prevent ping-pong handover, the
inter-frequency measurement should not be started
again. That is, this parameter is usually set higher than
the start threshold for event 2D or equal to the
threshold of event 2F.
Interval Type -24~0
Threshold of the target frequency for triggering inter-
frequency measurement with measurement quantity of
RSCP for CS domain services.
For CS domain services, if the value of [Inter-
frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions for triggering event 2B can be
met only when the quality of the target frequency is
higher than this threshold. If the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-frequency handovers at the RNC.
To set this parameter, you need to consider the
following factors:
The cell signal quality of the target frequency is better
and can meet the coverage requirements of the current
services.
After handover, to prevent ping-pong handover, the
inter-frequency measurement should not be started
again. That is, this parameter is usually set higher than
the trigger threshold for event 2D or equal to the
threshold of event 2F.
Interval Type -115~-25
Threshold of the target frequency for triggering inter-
frequency measurement with measurement quantity of
Ec/No for PS domain HSPA services.
For HSPA services, if the value of [Inter-frequency
measure report mode] is set to EVENT_TRIGGER,
this parameter is used to set the measurement control
of event 2B. One of the necessary conditions for
triggering event 2B can be met only when the quality
of the target frequency is higher than this threshold. If
the value of [Inter-frequency measure report mode] is
set to PERIODICAL_REPORTING, this parameter is
used to evaluate inter-frequency handovers at the
RNC.
To set this parameter, you need to consider the
following factors:
The cell signal quality of the target frequency is better
and can meet the coverage requirements of the current
services.
After handover, to prevent ping-pong handover, the
inter-frequency measurement should not be started
again. That is, this parameter is usually set higher than
the start threshold for event 2D or equal to the
threshold of event 2F.
Interval Type -24~0
Threshold of the target frequency for triggering inter-
frequency measurement with measurement quantity of
RSCP for PS domain HSPA services.
For HSPA services, if the value of [Inter-frequency
measure report mode] is set to EVENT_TRIGGER,
this parameter is used to set the measurement control
of event 2B. One of the necessary conditions for
triggering event 2B can be met only when the quality
of the target frequency is higher than this threshold. If
the value of [Inter-frequency measure report mode] is
set to PERIODICAL_REPORTING, this parameter is
used to evaluate inter-frequency handovers at the
RNC.
To set this parameter, you need to consider the
following factors:
The cell signal quality of the target frequency is better
and can meet the coverage requirements of the current
services.
After handover, to prevent ping-pong handover, the
inter-frequency measurement should not be started
again. That is, this parameter is usually set higher than
the trigger threshold for event 2D or equal to the
threshold of event 2F.
Interval Type -115~-25
Threshold of the target frequency for triggering inter-
frequency measurement with measurement quantity of
Ec/No for PS domain non-HSPA services.
For PS domain non-HSPA services, if the value of
[Inter-frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions for triggering event 2B can be
met only when the quality of the target frequency is
higher than this threshold. If the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-frequency handovers at the RNC.
To set this parameter, you need to consider the
following factors:
The cell signal quality of the target frequency is better
and can meet the coverage requirements of the current
services.
After handover, to prevent ping-pong handover, the
inter-frequency measurement should not be started
again. That is, this parameter is usually set higher than
the trigger threshold for event 2D or equal to the
threshold of event 2F.
Interval Type -24~0
Threshold of the target frequency for triggering inter-
frequency measurement with measurement quantity of
RSCP for PS domain non-HSPA services.
For PS domain non-HSPA services, if the value of
[Inter-frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions for triggering event 2B can be
met only when the quality of the target frequency is
higher than this threshold. If the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-frequency handovers at the RNC.
To set this parameter, you need to consider the
following factors:
The cell signal quality of the target frequency is better
and can meet the coverage requirements of the current
services.
After handover, to prevent ping-pong handover, the
inter-frequency measurement should not be started
again. That is, this parameter is usually set higher than
the trigger threshold for event 2D or equal to the
threshold of event 2F.
Interval Type -115~-25
Quality requirement for the inter-RAT cell during an
inter-RAT handover with CS domain services.
For CS domain services, if the value of [Inter-
frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 3A. One of the
necessary conditions for triggering event 3A can be
met only when the quality of the target frequency is
higher than this threshold. The event 3A can be
triggered only when the requirements of frequency
quality threshold of relevant measurement quantity of
the CS domain services are met; if the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-RAT coverage handovers at the
RNC. Note that the value 0 means the physical value
is smaller than -110 dBm.
If the periodical report mode is used, the inter-RAT
handover decision thresholds are used for the
assessment of inter-RAT coverage handover, namely
as Tother_RAT in the following formulas. The inter-
RAT handover decision thresholds are the absolute
thresholds (RSSI) of inter-RAT cell quality for the
inter-RAT handover decision.
If the quality of another RAT in the inter-RAT
measurement report meets the following condition:
Mother_RAT + CIO >= Tother_RAT + H/2
the system starts the trigger timer and implements the
handover decision after timeout. If the quality of the
preceding RAT meets the following condition before
timeout:
Mother_RAT + CIO < Tother_RAT - H/2
The system stops the timer, and the RNC waits for
another inter-RAT measurement report.
Interval Type 0~63
Quality requirement for the inter-RAT cell during an
inter-RAT handover with HSDPA services.
For PS domain services, if the value of [Inter-
frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 3A. One of the
necessary conditions for triggering event 3A can be
met only when the quality of the target frequency is
higher than this threshold. The event 3A can be
triggered only when the requirements of frequency
quality threshold of relevant measurement quantity of
the PS domain services are met; if the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-RAT coverage handovers at the
RNC. Note that the value 0 means the physical value
is smaller than -110 dBm.
If the periodical report mode is used, the inter-RAT
handover decision thresholds are used for the
assessment of inter-RAT coverage handover, namely
as Tother_RAT in the following formulas. The inter-
RAT handover decision thresholds are the absolute
thresholds (RSSI) of inter-RAT cell quality for the
inter-RAT handover decision.
If the quality of another RAT in the inter-RAT
measurement report meets the following condition:
Mother_RAT + CIO >= Tother_RAT + H/2
the system starts the trigger timer and implements the
handover decision after timeout. If the quality of the
preceding RAT meets the following condition before
timeout:
Mother_RAT + CIO < Tother_RAT - H/2
The system stops the timer, and the RNC waits for
another inter-RAT measurement report.
Interval Type 0~63
Quality requirement for the inter-RAT cell during an
inter-RAT handover with PS domain non-HSDPA
services.
For PS domain non-HSDPA services, if the value of
[Inter-frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 3A. One of the
necessary conditions for triggering event 3A can be
met only when the quality of the target frequency is
higher than this threshold. The event 3A can be
triggered only when the requirements of frequency
quality threshold of relevant measurement quantity of
the PS domain services are met; if the value of [Inter-
frequency measure report mode] is set to
PERIODICAL_REPORTING, this parameter is used
to evaluate inter-RAT coverage handovers at the
RNC. Note that the value 0 means the physical value
is smaller than -110 dBm.
If the periodical report mode is used, the inter-RAT
handover decision thresholds are used for the
assessment of inter-RAT coverage handover, namely
as Tother_RAT in the following formulas. The inter-
RAT handover decision thresholds are the absolute
thresholds (RSSI) of inter-RAT cell quality for the
inter-RAT handover decision.
If the quality of another RAT in the inter-RAT
measurement report meets the following condition:
Mother_RAT + CIO >= Tother_RAT + H/2
the system starts the trigger timer and implements the
handover decision after timeout. If the quality of the
preceding RAT meets the following condition before
timeout:
Mother_RAT + CIO < Tother_RAT - H/2
The system stops the timer, and the RNC waits for
Interval Type 0~63
This parameter specifies the segment number.
Segment 1: basic device information
Segment 2: connection information
Segment 3: module information
Segment 4: configuration information
Segment 5: peer device information
Segment 6: host version information
Segment 7: cabinet information
Segment 8: subrack information
Segment 9: board and Flash electronic label
information
Segment 10: slot information
Segment 11: port information
Segment 12: antenna information
Interval Type 1~12
This parameter specifies the number of transport blocks in HS-SCCH Less Operation mode. Enumeration Type D0, D1, D2, D3, D4
This parameter defines the number of the transport blocks corresponding to the TF 1, each transport block size is defined by RLCSize. The parameter value should not be 0 if there is only one TF. For detailed information of this parameter, refer to 3GPP TS 25.302. Interval Type 0~512
This parameter defines the number of the transport blocks corresponding to the TF 2, each transport block size is defined by RLCSize. For detailed information of this parameter, refer to 3GPP TS 25.302. Interval Type 0~512
This parameter defines the number of the transport blocks corresponding to the TF 3, each transport block size is defined by RLCSize. For detailed information of this parameter, refer to 3GPP TS 25.302. Interval Type 0~512
This parameter specifies the index of the size of a
transport block transmitted in HS-SCCH Less
Operation mode. The mapping between the index and
the transport block size is as follows:
137~1 149~2 161~3 173~4 185~5 197~6 209~7
221~8 233~9 245~10 257~11 269~12 281~13 293~14
305~15 317~16 329~17 341~18 353~19 365~20
377~21 389~22 401~23 413~24 425~25 437~26
449~27 461~28 473~29 485~30 497~31 509~32
521~33 533~34 545~35 557~36 569~37 581~38
593~39 605~40 616~41 627~42 639~43 650~44
662~45 674~46 686~47 699~48 711~49 724~50
737~51 751~52 764~53 778~54 792~55 806~56
821~57 836~58 851~59 866~60 882~61 898~62
914~63 931~64 947~65 964~66 982~67 1000~68
1018~69 1036~70 1055~71 1074~72 1093~73
1113~74 1133~75 1154~76 1175~77 1196~78
1217~79 1239~80 1262~81 1285~82 1308~83
1331~84 1356~85 1380~86 1405~87 1430~88
1456~89 1483~90. For details, refer to the 3GPP TS
Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
This parameter specifies the index of the size of a
transport block transmitted in HS-SCCH Less
Operation mode. The mapping between the index and
the transport block size is as follows:
137~1 149~2 161~3 173~4 185~5 197~6 209~7
221~8 233~9 245~10 257~11 269~12 281~13 293~14
305~15 317~16 329~17 341~18 353~19 365~20
377~21 389~22 401~23 413~24 425~25 437~26
449~27 461~28 473~29 485~30 497~31 509~32
521~33 533~34 545~35 557~36 569~37 581~38
593~39 605~40 616~41 627~42 639~43 650~44
662~45 674~46 686~47 699~48 711~49 724~50
737~51 751~52 764~53 778~54 792~55 806~56
821~57 836~58 851~59 866~60 882~61 898~62
914~63 931~64 947~65 964~66 982~67 1000~68
1018~69 1036~70 1055~71 1074~72 1093~73
1113~74 1133~75 1154~76 1175~77 1196~78
1217~79 1239~80 1262~81 1285~82 1308~83
1331~84 1356~85 1380~86 1405~87 1430~88
1456~89 1483~90. For details, refer to the 3GPP TS
Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
This parameter specifies the index of the size of a
transport block transmitted in HS-SCCH Less
Operation mode. The mapping between the index and
the transport block size is as follows:
137~1 149~2 161~3 173~4 185~5 197~6 209~7
221~8 233~9 245~10 257~11 269~12 281~13 293~14
305~15 317~16 329~17 341~18 353~19 365~20
377~21 389~22 401~23 413~24 425~25 437~26
449~27 461~28 473~29 485~30 497~31 509~32
521~33 533~34 545~35 557~36 569~37 581~38
593~39 605~40 616~41 627~42 639~43 650~44
662~45 674~46 686~47 699~48 711~49 724~50
737~51 751~52 764~53 778~54 792~55 806~56
821~57 836~58 851~59 866~60 882~61 898~62
914~63 931~64 947~65 964~66 982~67 1000~68
1018~69 1036~70 1055~71 1074~72 1093~73
1113~74 1133~75 1154~76 1175~77 1196~78
1217~79 1239~80 1262~81 1285~82 1308~83
1331~84 1356~85 1380~86 1405~87 1430~88
1456~89 1483~90.For details, refer to the 3GPP TS
Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
This parameter specifies the index of the size of a
transport block transmitted in HS-SCCH Less
Operation mode. The mapping between the index and
the transport block size is as follows:
137~1 149~2 161~3 173~4 185~5 197~6 209~7
221~8 233~9 245~10 257~11 269~12 281~13 293~14
305~15 317~16 329~17 341~18 353~19 365~20
377~21 389~22 401~23 413~24 425~25 437~26
449~27 461~28 473~29 485~30 497~31 509~32
521~33 533~34 545~35 557~36 569~37 581~38
593~39 605~40 616~41 627~42 639~43 650~44
662~45 674~46 686~47 699~48 711~49 724~50
737~51 751~52 764~53 778~54 792~55 806~56
821~57 836~58 851~59 866~60 882~61 898~62
914~63 931~64 947~65 964~66 982~67 1000~68
1018~69 1036~70 1055~71 1074~72 1093~73
1113~74 1133~75 1154~76 1175~77 1196~78
1217~79 1239~80 1262~81 1285~82 1308~83
1331~84 1356~85 1380~86 1405~87 1430~88
1456~89 1483~90.For details, refer to the 3GPP TS
Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
Used for the MTP3-B to test a link. If the test is successful, the tested link can be used to bear signalling. If failed, the MTP3-B periodically sends a location command until the test is successful. When the link is deleted or deactivated, the MTP3-B stops sending the location command. Interval Type 1~254
Difference between the System Frame Number (SFN) and NodeB Frame Number (BFN) of the NodeB which the cell belongs to. It is recommended that Tcell of difference cells under one NodeB should be unique. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type CHIP0, CHIP256, CHIP512, CHIP768, CHIP1024, CHIP1280, CHIP1536, CHIP1792, CHIP2048, CHIP2304
Uniquely identifying a cell. Interval Type 0~65535
Length of the test code transmitted by the signalling link. Interval Type 1~15
Maximum duration of cell reselection. This parameter, along with the [Max number of cell reselection], is used for rate evaluation in HCS. For details, refer to 3GPP TS 25.304. Enumeration Type NOT_USED, D30(30 seconds), D60(60 seconds), D120(120 seconds), D180(180 seconds), D240(240 seconds)
Time before reverting to low-mobility measurement. For detailed information of this parameter, refer to 3GPP TS 25.304. Enumeration Type NOT_USED, D10(10 seconds), D20(20 seconds), D30(30 seconds), D40(40 seconds), D50(50 seconds), D60(60 seconds), D70(70 seconds)
Hysterisis time before non-HCS resuming slow movement. When UE is in high-speed movement, if the number of cell reselections is less than Ncrnonhcs, the UE resumes to slow movement. For detailed inforamtion, refer to 3GPP TS 25.304. Enumeration Type NotUsed, D10(10 seconds), D20(20 seconds), D30(30 seconds), D40(40 seconds), D50(50 seconds), D60(60 seconds), D70(70 seconds)
Maximum duration of non-HCS cell reselection. If the number of cell reselection exceed the value of this parameter during Tcrmaxnonhcs, the UE is not in high-speed movement. For detailed inforamtion, refer to 3GPP TS 25.304. Enumeration Type NotUsed, D30(30 seconds), D60(60 seconds), D120(120 seconds), D180(180 seconds), D240(240 seconds)
Cycle timer for deciding whether the UE is in low-
mobility state.
This timer provides the time for the RNC to decide
whether the UE is in low-mobility state. The smaller
the value is, the more frequently the state estimation is
triggered. If the parameter is set to 0, it is an
indication that the state estimation is not triggered.
Interval Type 0~255
This parameter specifies whether the alarm reporting for temperature is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the upper threshold for temperature alarm. String Type -
This parameter specifies the lower threshold for temperature alarm. String Type -
Offset of HCS cell CPICH RSCP measurement value
in cell selection or reselection.
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value of the parameter, the higher the probability
of doing so.
Enumeration Type D3~0 D6~1 D9~2 D12~3 D15~4 D18~5 D21~6 INFINITY
Offset of cell CPICH Ec/No measurement value in
cell selection or reselection.
The larger the value of the parameter, the lower the
probability of selecting neighboring cells. The smaller
the value the parameter, the higher the probability of
doing so. Enumeration Type D2~0 D3~1 D4~2 D6~3 D8~4 D10~5 D12~6 INFINITY
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of AMR service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. Interval Type 1~6000
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. Interval Type 1~6000
This parameter is valid when the corresponding parameter related to the reporting period unit for the event F of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. Interval Type 1~6000
DL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~6000
Measurement report period of event E triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~6000
This parameter specifies the HSDPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~6000
HSDPA power requirement measurement report period For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~6000
This parameter specifies the HSUPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~6000
Value range: 1~6000
Physical value range: 10 to 60000, step: 10
Physical unit: ms
Content: UL basic common measurement report cycle.
For detailed information of this parameter, refer to
3GPP TS 25.433.
Recommended value: 20
Interval Type 1~6000
Measurement report period of event E triggered by UL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. Interval Type 1~6000
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. Interval Type 1~6000
Time window for estimating whether the UE is in
high-mobility state.
The start point of the estimation is the moment of the
last reporting of event 1D, and the backdated time
length is determined by this parameter. If the
parameter is set to 0, the RNC does not decide
whether the UE is in high-mobility state.
Interval Type 0~511
This parameter indicates whether the SCCPCH
involves the TFCI. When the downlink blind transport
format detection function is used, the TFCI is
unavailable. For detailed information of this
parameter, refer to 3GPP TS 25.433.
Note: This parameter is configured only for the
SCCPCH in the formats 8 to 17.
Enumeration Type EXISTS, NOT_EXISTS
This parameter defines the number of the transport formats. For detailed information of this parameter, refer to 3GPP TS 25.302. Enumeration Type D1, D2, D3
Select the target BAM to switch over work area. Enumeration Type ACTIVE(Active BAM), STANDBY(Standby BAM)
When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding window. If the number of faulty CRCs exceeds the specified threshold, event 5A is triggered. The threshold is Event 5A Threshold. Interval Type 1~512
If DL code TX power is higher than the Ea absolute threshold, event Ea is triggered. This event triggers DL QoS operation. This parameter specifies a relative threshold. Absolute Ea threshold = RL Max DL TX power - ThdEa. Interval Type 0~56
If DL code TX power is lower than the Eb absolute threshold, event Eb is triggered. When this event report is received, DL QoS operation is stopped. This parameter specifies a relative threshold. Absolute Eb threshold = RL Max DL TX power - ThdEb. Interval Type 0~56
This parameter specifies the Traffic Handling Priority (THP) of each traffic class carried on the logical channel. The value 1 means the highest priority, the value 14 means the lowest priority, and the value 15 means no priority. Interval Type 1~15
This parameter specifies the user class associated with interactive traffic handling priority 10. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 11. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 12. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 13. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 14. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 15. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 1. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 2. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 3. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 4. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 5. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 6. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 7. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 8. Enumeration Type High, Medium, Low
This parameter specifies the user class associated with interactive traffic handling priority 9. Enumeration Type High, Medium, Low
This parameter specifies the Traffic Handling Priority (THP) class that the THP priority is mapped to. This parameter is valid for only interactive services. Enumeration Type High, Medium, Low
This parameter specifies the timeout duration of a sent ping packet. Interval Type 200~10000
This parameter specifies the time duration of the packet. Interval Type 1~3
Specifying the time limitation for blocking a cell when normal priority is selected. Interval Type 1~3600
Timer_CU timer. Step is 0.05. This parameter will affect the efficiency and delay of AAL2 transmission. Interval Type 1~64
This parameter specifies the number of ping packets. Interval Type 1~1024
This parameter defines the length of the inter-freq
coverage handover delay to trig.
When the inter-freq coverage handover priority of the
reported inter-freq measure cells are lower than the
highest priority of the measure cells,start the inter-freq
coverage handover delay timer.
When the timer expiry or the priority of the reported
cells are equal to the highest priority, start inter-freq
handover.
Interval Type 0~1000
This parameter specifies the delay time after the RLC entity is established or reconfigured and before the retransmission ratio monitoring is started. Interval Type 0~500000
Time delay to trigger event 2B.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower probability of incorrect decision, but the slower
the response of event 2B to the change of measured
signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
with most of the fast-moving UEs, this parameter can
be set smaller, whereas for the cell with most of the
slow-moving UEs, this parameter can be set larger.
The value of this parameter can be adjusted according
to the actual network statistics.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger event 2D.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower probability of incorrect decision, but the slower
the response of event 2D to the change of measured
signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
with most of the fast-moving UEs, this parameter can
be set smaller, whereas for the cell with most of the
slow-moving UEs, this parameter can be set larger.
The value of this parameter can be adjusted according
to the actual network statistics.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger the event 2F.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower probability of incorrect decision, but the slower
the response of event 2F to the change of measured
signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
with most of the fast-moving UEs, this parameter can
be set smaller, whereas for the cell with most of the
slow-moving UEs, this parameter can be set larger.
The value of this parameter can be adjusted according
to the actual network statistics.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay for triggering handovers to GSM cells
with non-verified BSIC.
During the period of time specified by this parameter,
if the signal quality in a neighboring GSM cell
satisfies inter-RAT handover conditions and the
neighboring GSM cell is not verified, an inter-RAT
handover is triggered. When the value of this
parameter is 65535, the RNC does not perform inter-
RAT handovers to non-verified GSM cells. The
higher the time-to-trigger parameters are, the smaller
the average number of handovers is, and the
possibility of call drops increases.
Interval Type 0~64000,65535
Time delay for hard handover triggered by periodical
reports.
Only the inter-frequency cell in which the signal
quality meets the requirement in all periodical reports
during the period of time specified by this parameter
can be selected as the target cell in the inter-frequency
handover. The larger the value of this parameter, the
lower probability of incorrect decision, but the slower
the response of the handover to the change of
measured signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
with most of the fast-moving UEs, this parameter can
be set smaller, whereas for the cell with most of the
slow-moving UEs, this parameter can be set larger.
The value of this parameter can be adjusted according
to the actual network statistics.
Interval Type 0~64000
Time delay for triggering handovers to GSM cells
with verified BSIC.
During the period of time specified by this parameter,
if the signal quality in a neighboring GSM cell
satisfies inter-RAT handover conditions and the
neighboring GSM cell is verified, an inter-RAT
handover is triggered.
The inter-RAT handover conditions are as follows:
Mother_RAT + CIO >= Tother_RAT + H/2
If the quality of the GSM neighboring cell meets the
preceding condition, the system starts the trigger
timer. The system then implements the handover
decision after timeout if the quality of the GSM
neighboring cell always meets the preceding condition
throughout the time length of the timer. The time
length of the trigger timer is called the delay trigger
time.
The delay trigger time and hysteresis are used to
prevent mis-decisions caused by signal jitters during
inter-RAT handover decisions.
Considering that the UE is on the edge of the system,
the parameter TimeToTrigForVerify should be set to a
comparatively low value. Because the GSM cells of
which the BSIC is already verified usually have good
performance, the parameter TimeToTrigForVerify
should be set to 0, which indicates that the handover is
implemented immediately.
The higher the time-to-trigger parameters are, the
smaller the average number of handovers is, and the
possibility of call drops increases.
Interval Type 0~64000
This parameter specifies the time from the moment when the traffic volume of the DCH exceeds the upper threshold to the moment when the traffic-related event 4A on DCH is triggered. This parameter is used to avoid unnecessary reports triggered by DCH traffic volume fluctuation. The larger the value of this parameter, the longer the required duration of the traffic volume exceeding the upper threshold, and the smaller the possibility of triggering traffic-related event 4A on DCH. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000, D10000, D15000, D20000, D25000, D30000
This parameter specifies the time from the moment when the traffic volume on the DCH falls below the lower threshold to the moment when the traffic-related event 4B is triggered. This parameter is set to avoid unnecessary reports triggered by DCH traffic fluctuation. The larger the value of this parameter, the longer the required duration of the traffic volume keeping below the lower threshold, and the smaller the possibility of triggering traffic-related event 4B on DCH. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000, D10000, D15000, D20000, D25000, D30000
This parameter specifies the number of consecutive
periods during which the percentage of retransmitted
PDUs is higher than the threshold of event A before
event A is triggered.
Recommended value (default value): 2. Interval Type 1~100
This parameter specifies the number of consecutive periods during which the percentage of retransmitted PDUs is lower than the threshold of event B before event B is triggered. Interval Type 1~100
TRMMAP ID. Interval Type 9~163
Index of the traffic mapping used by the current adjacent node's bronze user. Interval Type 0~163
Index of the traffic mapping used by the current adjacent node's gold user. Interval Type 0~163
Index of the traffic mapping used by the current adjacent node's silver user. Interval Type 0~163
Signalling link test acknowledgement timer. It is a protection timer waiting for a signalling link test acknowledgement message (SLTA) from the peer end after a signalling link test message (SLTM) is sent to the peer end. Interval Type 8000~12000
Signalling link repeat test timer. This timer is used to send the signalling link test messages (SLTM) to the peer end regularly. Interval Type 30000~90000
Transport type of the Iub interface. Enumeration Type ATM_TRANS(ATM circuit transmission), IP_TRANS(IP transmission), ATMANDIP_TRANS(ATM and IP transmission), HYBRID_IP_TRANS(Hybrid IP transmission)
IUR trans bearer type. Enumeration Type ATM_TRANS, IP_TRANS
The transfers bearer type of Iu interface. Enumeration Type ATM_TRANS, IP_TRANS
This parameter specifies the time offset of the DST from the normal time. Interval Type -120~-1,1~120
A positive value relative to Latest Time of Arrival (LToA). It indicates the endpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives before that time.For detailed information of this parameter, refer to 3GPP TS 25.402. Interval Type 0~2559
A positive value relative to Time of arrival window endpoint (ToAWE). It indicates the startpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives after that time.For detailed information of this parameter, refer to 3GPP TS 25.402. Interval Type 0~1279
The cell will shut down automatically only when the total user number is not greater than the threshold. The total user number consists of the DCH and CCH user numbers. Interval Type 0~5
This parameter specifies the type of the FAM logs to
be collected.
"Normal" indicates the text logs collected in the
\common\fam\famlog directory under the BAM
installation directory.
"Format" indicates the binary FAM logs collected in
the \common\fam\famlogfmt directory under the BAM
installation directory.
Enumeration Type NORMAL, FORMAT
HCS cell reselection penalty timer.
The larger the value of the parameter, the longer the
HCS penalty time. The smaller the value of the
parameter, the shorter the HCS penalty time.
Enumeration Type D0, D10, D20, D30, D40, D50, D60
This parameter specifies the traffic class. Based on Quality of Service (QoS), there are four traffic classes: conversational, streaming, interactive, and background. Enumeration Type CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND
This parameter specifies the traffic class that the service belongs to. Based on Quality of Service (QoS), there are two traffic classes: interactive, background. Enumeration Type INTERACTIVE, BACKGROUND
This parameter specifies the traffic type for the RRC redirection algorithm. Enumeration Type AMR, VP, PSR99, PSHSPA
Traffic mode of M3UA link set. Enumeration Type M3UA_OVERRIDE_MOD, M3UA_LOADSHARE_MOD
Transfer Common Channel User number
Value range: 0~10
Content: When the system is overloaded and
congested, users on the DCH can be reconfigured to
the CCH in order to reduce the cell load and recover
the system.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of users selected in executing reconfiguration to the
CCH.
If the parameter value is too high, the OLC action
may fluctuate greatly and over control may occur (the
state of overload and congestion turns into another
extreme--underload). If the parameter value is too
low, the OLC action has a slow response and the
effect is not apparent, affecting the OLC performance.
Interval Type 0~10
This parameter specifies the round-trip transport delay of Iub interface when the transmission mode is ATM transmission or of IP dedicated network. Interval Type 0~65535
The transport type of the adjacent node of the path.This parameter only effect on Iub interface. Enumeration Type IP, HYBRID_IP
Transport type. Enumeration Type ATM, IP, ATM_IP, HYBRID_IP
Uniquely identifying a common transport channel in a cell. Configured according to the product specifications. Interval Type 1~32
This parameter specifies the type of transport channel. Enumeration Type TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS
This parameter specifies the type of transport channel for the typical RAB. For CS services, this parameter must be set to TRCH_DCH. Enumeration Type TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS
This parameter specifies the type of transport channel at the local end for the typical RAB. For CS services, this parameter must be set to TRCH_DCH. Enumeration Type TRCH_DCH, TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS
Related length for 1D records in the best cells.
In the speed estimation algorithm, an algorithm is
adopted to avoid inaccurate estimation caused by
frequent handovers of best cells. That is, during the
latest [TRELATELENGTH], if more than one event
1D of a certain cell occurs, the event 1D record is
restored to the state when the 1st event 1D occurs
during the latest [TRELATELENGTH]. The given
time length is set by this parameter. If the value is set
too large, the RNC judges a non-frequently changing
best cell change as a frequently changing one by
mistake. If the value is set too small, the speed
estimation algorithm may be invalid. It is
recommended that this value be set according to the
cell radius.
Interval Type 0~120
If the signal quality (CPICH Ec/No measured by the
UE) of a neighboring cell is better than that of the
serving cell during the specified time of this
parameter, the UE reselects the neighboring cell. It is
used to avoid ping-pong reselection between different
cells. Note that the value 0 corresponds to the default
value defined in the protocol.
Set the parameter as follows:
1. Ensure that the UE can reselect a cell when
crossing the non-soft-switch area of the cell and that
the UE timely performs location updates, cell updates,
or URA updates when necessary.
2. Ensure that the UE does not reselect a cell when it
is in the soft-switch area of the cell. In this way, the
unnecessary location updates, cell updates, and URA
updates are avoided.
3. Consider the difference between cells that cover
different areas, for example the cells covering
highways and cells covering densely populated areas.
TIf the parameter is set to a comparatively low value,
the ping-pong reselections may be caused. The
parameter can be increased in populated area and
reduced in high-speed movement. If the parameter is
set to a comparatively high value, the cell reselection
delay may become excessively high, and thus cell
reselections may be affected.
For detailed information, refer to 3GPP TS 25.304.
Interval Type 0~31
This parameter indicates the UE reselction delay in the CELL_FACH connection mode. This parameter is not configured when the value is 255. Instead, the Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type 0~31,255
This parameter indicates the UE reselction delay in the CELL_PCH or URA_PCH connection mode. This parameter is not configured when the value is 255. Instead, the Treselections parameter is used. For detailed inforamtion, refer to 3GPP TS 25.304. Interval Type 0~31,255
This parameter specifies the index of a traffic record. Interval Type 100~1999
This parameter specifies the time delay to trigger
event 1A. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the lower the incorrect decision probability, but the
slower the response of the event to measurement
signal change.
The purposes of the time-to-trigger mechanism are as
follows:
Reducing the number of wrong event reports caused
by burst signals.
Inhibiting the ping-pong handover to some extent.
Reducing the influence of shadow fading on event
decisions.
The hysteresis can effectively reduce the average
number of handovers and wrong decisions, and avoid
unnecessary handovers.
As for the impact on network performance:
The larger the value of this parameter, the smaller the
average number of handovers, and the greater the
possibility of call drops.
The TS 25.133 V3.6.0 protocol prescribes that the
intra-frequency measurement physical layer updates
the measurement result once every 200 ms, so the
time to trigger shorter than 200 ms is invalid. The
time-to-trigger parameter should be close to a multiple
of 200 ms.
The UE at different rates may react differently to the
hysteresis value for the event. For the fast-moving
UE, the call drop rate is more sensitive to the
hysteresis value, whereas for the slow-moving UE, the
call drop rate is less sensitive to the hysteresis value.
This can also reduce ping-pong handovers or wrong
handovers. Therefore, for the cell with most of the fast-
moving UEs, this parameter can be set smaller,
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the time delay to trigger
event 1B. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the lower the incorrect decision probability, but the
slower the response of the event to measurement
signal change.
The purposes of the time-to-trigger mechanism are as
follows:
Reducing the number of wrong event reports caused
by burst signals.
Inhibiting the ping-pong handover to some extent.
Reducing the influence of shadow fading on event
decisions.
The hysteresis can effectively reduce the average
number of handovers and wrong decisions, and avoid
unnecessary handovers.
As for the impact on network performance:
The larger the value of this parameter, the smaller the
average number of handovers, and the greater the
possibility of call drops.
The TS 25.133 V3.6.0 protocol prescribes that the
intra-frequency measurement physical layer updates
the measurement result once every 200 ms, so the
time to trigger shorter than 200 ms is invalid. The
time-to-trigger parameter should be close to a multiple
of 200 ms.
The UE at different rates may react differently to the
hysteresis value for the event. For the fast-moving
UE, the call drop rate is more sensitive to the
hysteresis value, whereas for the slow-moving UE, the
call drop rate is less sensitive to the hysteresis value.
This can also reduce ping-pong handovers or wrong
handovers. Therefore, for the cell with most of the fast-
moving UEs, this parameter can be set smaller,
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the time delay to trigger
event 1C. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the lower the incorrect decision probability, but the
slower the response of the event to measurement
signal change.
The purposes of the time-to-trigger mechanism are as
follows:
Reducing the number of wrong event reports caused
by burst signals.
Inhibiting the ping-pong handover to some extent.
Reducing the influence of shadow fading on event
decisions.
The hysteresis can effectively reduce the average
number of handovers and wrong decisions, and avoid
unnecessary handovers.
As for the impact on network performance:
The larger the value of this parameter, the smaller the
average number of handovers, and the greater the
possibility of call drops.
The TS 25.133 V3.6.0 protocol prescribes that the
intra-frequency measurement physical layer updates
the measurement result once every 200 ms, so the
time to trigger shorter than 200 ms is invalid. The
time-to-trigger parameter should be close to a multiple
of 200 ms.
The UE at different rates may react differently to the
hysteresis value for the event. For the fast-moving
UE, the call drop rate is more sensitive to the
hysteresis value, whereas for the slow-moving UE, the
call drop rate is less sensitive to the hysteresis value.
This can also reduce ping-pong handovers or wrong
handovers. Therefore, for the cell with most of the fast-
moving UEs, this parameter can be set smaller,
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the time delay to trigger
event 1D. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the lower the incorrect decision probability, but the
slower the response of the event to measurement
signal change.
The purposes of the time-to-trigger mechanism are as
follows:
Reducing the number of wrong event reports caused
by burst signals.
Inhibiting the ping-pong handover to some extent.
Reducing the influence of shadow fading on event
decisions.
The hysteresis can effectively reduce the average
number of handovers and wrong decisions, and avoid
unnecessary handovers.
As for the impact on network performance:
The larger the value of this parameter, the smaller the
average number of handovers, and the greater the
possibility of call drops.
The TS 25.133 V3.6.0 protocol prescribes that the
intra-frequency measurement physical layer updates
the measurement result once every 200 ms, so the
time to trigger shorter than 200 ms is invalid. The
time-to-trigger parameter should be close to a multiple
of 200 ms.
The UE at different rates may react differently to the
hysteresis value for the event. For the fast-moving
UE, the call drop rate is more sensitive to the
hysteresis value, whereas for the slow-moving UE, the
call drop rate is less sensitive to the hysteresis value.
This can also reduce ping-pong handovers or wrong
handovers. Therefore, for the cell with most of the fast-
moving UEs, this parameter can be set smaller,
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the time delay to trigger 1F.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower the incorrect decision probability, but the slower
the response of the event to measurement signal
change.
The purposes of the time-to-trigger mechanism are as
follows:
Reducing the number of wrong event reports caused
by burst signals.
Inhibiting the ping-pong handover to some extent.
Reducing the influence of shadow fading on event
decisions.
The hysteresis can effectively reduce the average
number of handovers and wrong decisions, and avoid
unnecessary handovers.
As for the impact on network performance:
The larger the value of this parameter, the smaller the
average number of handovers, and the greater the
possibility of call drops.
The TS 25.133 V3.6.0 protocol prescribes that the
intra-frequency measurement physical layer updates
the measurement result once every 200 ms, so the
time to trigger shorter than 200 ms is invalid. The
time-to-trigger parameter should be close to a multiple
of 200 ms.
The UE at different rates may react differently to the
hysteresis value for the event. For the fast-moving
UE, the call drop rate is more sensitive to the
hysteresis value, whereas for the slow-moving UE, the
call drop rate is less sensitive to the hysteresis value.
This can also reduce ping-pong handovers or wrong
handovers. Therefore, for the cell with most of the fast-
moving UEs, this parameter can be set smaller,
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the time delay to trigger
event 1J. The value of this parameter correlates with
slow fading. The larger the value of this parameter,
the lower probability of incorrect decision, but the
slower the response of event to the change of
measured signals.
The purposes of the time-to-trigger mechanism are as
follows:
Reducing the number of wrong event reports caused
by burst signals.
Inhibiting the ping-pong handover to some extent.
Reducing the influence of shadow fading on event
decisions.
The hysteresis can effectively reduce the average
number of handovers and wrong decisions, and avoid
unnecessary handovers.
As for the impact on network performance:
The larger the value of this parameter, the smaller the
average number of handovers, and the greater the
possibility of call drops.
The TS 25.133 V3.6.0 protocol prescribes that the
intra-frequency measurement physical layer updates
the measurement result once every 200 ms, so the
time to trigger shorter than 200 ms is invalid. The
time-to-trigger parameter should be close to a multiple
of 200 ms.
The UE at different rates may react differently to the
hysteresis value for the event. For the fast-moving
UE, the call drop rate is more sensitive to the
hysteresis value, whereas for the slow-moving UE, the
call drop rate is less sensitive to the hysteresis value.
This can also reduce ping-pong handovers or wrong
handovers. Therefore, for the cell with most of the fast-
moving UEs, this parameter can be set smaller,
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger the event 2C.
The value of this parameter correlates with slow
fading.
The larger the value of this parameter, the lower
probability of incorrect decision, but the slower the
response of event 2F to the change of measured
signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
where fast-moving UEs are dominant, this parameter
can be set smaller, whereas for the cell where slow-
moving UEs are dominant, this parameter can be set
larger. The value of this parameter can be adjusted
according to the actual network statistics.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger the event 2D.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower probability of incorrect decision, but the slower
the response of event 2F to the change of measured
signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
with most of the fast-moving UEs, this parameter can
be set smaller, whereas for the cell with most of the
slow-moving UEs, this parameter can be set larger.
The value of this parameter can be adjusted according
to the actual network statistics.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger the event 2F.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower probability of incorrect decision, but the slower
the response of event 2F to the change of measured
signals.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Therefore, for the cell
with most of the fast-moving UEs, this parameter can
be set smaller, whereas for the cell with most of the
slow-moving UEs, this parameter can be set larger.
The value of this parameter can be adjusted according
to the actual network statistics.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger the event 3A.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower the incorrect decision probability, but the slower
the response of the event 3A to measurement signal
change.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Thus, set the value
smaller for cells where fast-moving UEs are
dominant, whereas set the value bigger for cells where
slow-moving UEs are dominant. The value of this
parameter can be adjusted according to the actual
network statistics.
Because the report period of inter-frequency
measurement is 480 ms, the trigger time period
shorter than 480 ms is invalid.
The bigger the time-to-trigger values are, the lower
the average handover frequency is; but the increase of
the time-to-trigger values increases the risk of call
drops.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Time delay to trigger the event 3C.
The value of this parameter correlates with slow
fading. The larger the value of this parameter, the
lower the incorrect decision probability, but the slower
the response of the event 3C to measurement signal
change.
Based on the existing emulation result, the hysteresis
value is set to effectively reduce the average number
of handovers and the number of wrong handovers,
thus preventing unnecessary handovers. In addition,
from the emulation perspective, the UE at different
rates may react differently to the hysteresis value for
the event. For the fast-moving UE, the call drop rate is
more sensitive to the hysteresis value, whereas for the
slow-moving UE, the call drop rate is less sensitive to
the hysteresis value. This can also reduce ping-pong
handovers or wrong handovers. Thus, set the value
smaller for cells where fast-moving UEs are
dominant, whereas set the value bigger for cells where
slow-moving UEs are dominant. The value of this
parameter can be adjusted according to the actual
network statistics.
Because the report period of inter-frequency
measurement is 480 ms, the trigger time period
shorter than 480 ms is invalid.
The bigger the time-to-trigger values are, the lower
the average handover frequency is; but the increase of
the time-to-trigger values increases the risk of call
drops.
Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE Rx-Tx time difference should be 1024 chips. When the UE Rx-Tx time difference becomes greater than the predefined threshold, event 6F will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE Rx-Tx time difference should be 1024 chips. When the UE Rx-Tx time difference becomes smaller than the predefined threshold, event 6G will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331 protocol. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
This parameter specifies the number of a port that carries the link in a trunk group. Interval Type 0~7
This parameter specifies the slot number for a member port in a trunk group. Interval Type 14~27
This parameter specifies the number of a trunk group. Interval Type 0~7
Radio Link Failure Timer Duration. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-of-sync indications of the number defined by NOutsyncInd. The NodeB shall stop and reset the timer after receiving successive in-sync indications of the number defined by NInsyncInd. When the timer expires, the NodeB triggers the radio link failure process, and indicates which radio link set is out-of-sync. If the value is excessively low, there are few chances for the radio link to get synchronized. If the value is excessively high, the radio link failure process is probably delayed, and the downlink interference increases. Interval Type 0~255
Uniquely identifying an RNC. Interval Type 0~4095
This parameter specifies the TRUNK IP address for the DHCP server. IP Address Type -
This parameter specifies the IP address of the NodeB TRUNK. IP Address Type -
This parameter specifies the subnet mask for the NodeB TRUNK. IP Address Type -
This parameter specifies the number of a trunk group on the logical port. Interval Type 0~7
This parameter specifies the number of a timeslot. For E1 links, the value of this parameter ranges from 1 to 31. For T1 links, the value of this parameter ranges from 1 to 24. Enumeration Type TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), TS30(Time_slot_30), TS31(Time_slot_31)
This parameter specifies whether timeslot 16 is used. The setting of this parameter should be consistent with that at the peer end. Enumeration Type ON, OFF
This parameter specifies the timeslot bearing the E1/T1 link. Bit Field Type TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10), TS11(Time_slot_11), TS12(Time_slot_12), TS13(Time_slot_13), TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), TS21(Time_slot_21), TS22(Time_slot_22), TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), TS30(Time_slot_30), TS31(Time_slot_31)
This parameter specifies the index of timeslot cross connection. The index is automatically generated by the system. Interval Type 0~65535
This parameter specifies the name of the scheduled task to be started. String Type -
Time window for deciding whether the UE is in low-
mobility state.
Every time the slow speed cycle timer times out, the
RNC estimates whether the UE is in low-mobility
state. The backdated time length is set by this
parameter.
Interval Type 0~511
MGWTST user IMSI in a number segment. String Type -
This parameter specifies the time duration of the IP loopback test. During this period, the DSP sends detection packets at a specified rate. Interval Type 1~120
Indicating whether setting MGWTST Switch on. Enumeration Type OFF, ON
This parameter specifies the duration of the CPU usage test. Interval Type 1~4294967295
This parameter specifies the time-to-live of a packet detected through EthOAM 1AG link tracing. Interval Type 1~128
This parameter specifies the forward bandwidth of the logical port. Interval Type 10~2810
Forward bandwidth of the IP path. Interval Type 1~3000000
This parameter is valid only when Transport Resource Group Type is ATM or Transport Resource Group Type is IP and Bandwidth Mode is FULL_DUPLEX. Interval Type 0~4000000
This parameter indicates whether transmission diversity configuration of the cell is activated. Enumeration Type TRUE, FALSE
This parameter specifies the interval of sending the ping packets. Interval Type 200~10000
This parameter specifies the interval for sending loopback packets. Interval Type 10~60
This parameter specifies the TX traffic record index at the port from which the IPoA PVC goes out of the RNC. The TX traffic must have been configured. Interval Type 100~1999
This parameter specifies the upper layer application type to be set. The type may be CCP, NCP, IPoA PVC, or ALCAP. Enumeration Type NBAP_CCP, NBAP_NCP, IUB_OAM, ALCAP
Depending on the value of [Band indication], as
shown below:
Band1
General frequencies: [10562-10838]
Additional frequencies: none
Band2
General frequencies: [9662-9938]
Additional frequencies:
{412,437,462,487,512,537,562,587,612,637,662,687}
Band3
General frequencies: [1162-1513]
Additional frequencies: none
Band4
General frequencies: [1537-1738]
Additional frequencies: {1887, 1912, 1937, 1962,
1987, 2012, 2037, 2062, 2087}
Band5
General frequencies: [4357-4458]
Additional frequencies: {1007, 1012, 1032,1037,
1062, 1087}
Band6
General frequencies: [4387-4413]
Additional frequencies: {1037, 1062}
Band7
General frequencies: [2237-2563]
Additional frequencies: {2587, 2612, 2637, 2662,
2687, 2712, 2737, 2762, 2787, 2812, 2837, 2862,
2887, 2912}
Band8
General frequencies: [2937-3088]
Additional frequencies: none
Band9
General frequencies: [9237-9387]
Additional frequencies: none
Interval Type 0~16383
Depending on the value of [Band indication], as
shown below:
Band1:
General frequencies: [9612-9888]
Additional frequencies: none
Band2:
General frequencies: [9262-9538]
Additional frequencies:
{12,37,62,87,112,137,162,187,212,237,262,287}
Band3:
General frequencies: [937-1288]
Additional frequencies: none
Band4:
General frequencies: [1312-1513]
Additional frequencies: {1662, 1687, 1712, 1737,
1762, 1787, 1812, 1837, 1862}
Band5:
General frequencies: [4132-4233]
Additional frequencies: {782, 787, 807, 812, 837,
862}
Band6:
General frequencies: [4162-4188]
Additional frequencies: {812, 837}
Band7:
General frequencies: [2012-2338]
Additional frequencies: {2362, 2387, 2412, 2437,
2462, 2487, 2512, 2537, 2562, 2587, 2612, 2637,
2662, 2687}
Band8:
General frequencies: [2712-2863]
Additional frequencies: none
Band9:
General frequencies: [8762-8912]
Additional frequencies: none
Interval Type 0~16383
Indicating whether the UL frequency of the cell need be configured. TRUE indicates that the UL frequency need be configured. FALSE indicates that the UL frequency need not be configured. It is configured automatically according to the relationship between UL and DL frequencies. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type TRUE, FALSE
This timer is started when an AAL2 signaling entity sends the peer node a request for unblocking an AAL2 path. Interval Type 2000~60000
UDP MUX Max Length. Interval Type 135~1031
Receive UDP MUX Mode(Only effect on IuCS interface). Not support udpmux mode means receiver not support UDP MUX, RTP head not MUX mode means receiver support UDP MUX but not RTP header MUX,RTP head MUX mode means support both. Enumeration Type MUXCLOSE, NORTPCOMP, RTPCOMP
Sender UDP MUX Mode(Only effect on IuCS interface), Not support udpmux mode means not support UDP MUX, RTP head not MUX mode means the sender support UDP MUX but not RTP header MUX,RTP head MUX mode means support both. Enumeration Type MUXCLOSE, NORTPCOMP, RTPCOMP
UDP MUX Max Time. Interval Type 1~10
Switch for sending A-GPS assistance data in UE-assisted mode. This parameter specifies the GPS data to be sent. Bit Field Type REFERENCE_TIME_FOR_GPS, REFERENCE_LOCATION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODEL, GPS_IONOSPHERIC_MODEL, GPS_UTC_MODEL, GPS_ALMANAC, GPS_ACQ_ASSIST, GPS_REALTIME_INTEGRITY
Switch for sending A-GPS assistance data in UE-based mode. This parameter specifies the GPS data to be sent. Bit Field Type REFERENCE_TIME_FOR_GPS, REFERENCE_LOCATION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODEL, GPS_IONOSPHERIC_MODEL, GPS_UTC_MODEL, GPS_ALMANAC, GPS_ACQ_ASSIST, GPS_REALTIME_INTEGRITY
A timer used to wait UE capability enquiry response . Interval Type 1~10000
A timer to RNC wait for the response to counter check in security mode procedure. Interval Type 1~10000
This parameter specifies the type of the uninhibition, which can be physical uninhibition and logical uninhibition. Enumeration Type LOGIC(Logic uninhibit), PHYSICAL(Physical uninhibit)
This parameter specifies the unit time used for the BER test. Interval Type 300~1000
This parameter specifies the upper limit of the alarm. String Type -
UL activity factor of the R99 AMR conversational service Signals might be discontinuously transmitted because of the activation detection of conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL. A pair of activity factors is separately defined for each of the four service classes. Interval Type 0~100
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. Event triggering is used for UL measurement. The event 6A1 is triggered when the measured value is greater than the absolute upper threshold 6A1. When the event 6A1 is triggered, the AMR speech rate should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A2 is triggered. Event triggering is used for UL measurement. The event 6A2 is triggered when the measured value is greater than the absolute upper threshold 6A2. When the event 6A2 is triggered, the AMR speech rate should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of AMR keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. Event triggering is used for UL measurement. The event 6B1 is triggered when the measured value is lower than the absolute lower threshold 6B1. When the event 6B1 is triggered, the AMR speech rate should be raised. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of AMR keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. Event triggering is used for UL measurement. The event 6B2 is triggered when the measured value is lower than the absolute lower threshold 6B2. When the event 6B2 is triggered, the AMR speech rate should be raised. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of AMR keeps fulfilling the 6D measurement condition before the event 6D is triggered. Event triggering is used for UL measurement. The event 6D is triggered when the measured value is greater than the absolute upper threshold 6D. When the event 6D is triggered, the AMR speech rate should be lowered. The measured value is reported after it fulfills the conditions for reporting and for the trigger time specified by this parameter. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
UL activity factor of the R99 background service. Interval Type 0~100
Value range: D0, D1, D2, D3, D4, D5, D6, D7, D8,
D9, D11, D13, D15, D17, D19
Physical value range: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13,
15, 17, 19
Content: L3 filtering coefficient. The larger the value
of this parameter, the stronger the smoothing effect
and the higher the anti-slow-fading capability, but the
lower the signal change tracing capability. For
detailed information of this parameter, refer to 3GPP
TS 25.433.
Recommended value: D6
Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
This parameter specifies the default rate threshold for decision to use DCH to carry UL PS domain background/interactive services. If the FRC parameters of the best cell cannot be obtained, this default value will be used. Only when the UL service rate is higher than or equal to this threshold, and the DL service rate is higher than or equal to the downlink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. According to the product specifications, only the background/interactive services whose rate is lower than 16 kbit/s can be carried on the common channel.Therefore, this parameter can only be set to 16 kbit/s or 8 kbit/s. Enumeration Type D8, D16
UL BE traffic Initial bit rate. When DCCC function is enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial bit rate.The larger this parameter to be set, the sooner max bit rate to be reached, but the bit rate is more likely to be declined when system congested, so it makes no sense to set this parameter too high. Contrarily,the smaller the parameter to be set, the more easily the BE traffic to be accessed at required bit rate. But over small setting will take longer to adjust to needed bit rate. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
The rate decision threshold of UL PS domain background/interactive service to be carried on E-DCH. When the maximum UL service rate is higher than or equal to this threshold, the service will be carried on E-DCH; otherwise, it will be carried on DCH. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880, D5740
Duration when the measured value of BE keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of BE keeps fulfilling the 6A2 measurement condition before the event 6A2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of BE keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of BE keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of BE keeps fulfilling the 6D measurement condition before the event 6D is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Length of smoothing filter window of uplink CAC. Interval Type 1~32
The admission control decision is only for dedicated
channels. For common channels, some resources
instead of a special admission procedure are reserved.
In the UL, according to the current load factor and the
characteristics of the new call, the UL CAC algorithm
predicts the new traffic channels load factor with the
assumption of admitting the new call, then plus with
the premeditated common channel UL load factor to
get the predicted UL load factor. Then, compare it
with the UL admission threshold. If the value is not
higher than the threshold, the call is admitted;
otherwise, rejected. If the value is too high, power
resources are wasted, which impacts system capacity.
If the value is too low, resources can be fully used and
coverage may be impacted in case of insufficient
resources.
Interval Type 0~100
Admission threshold of total cell uplink power. This parameter is related to the target load of the uplink schedule. The total uplink load fluctuates closing to the target load due to the schedule mechanism of the HSUPA. Therefore, the target load is added with margin, acting as the basis of this parameter. If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. If the value is lower than the target load threshold of the uplink schedule, the possibility of user rejects is great. Interval Type 0~100
This parameter specifies the compression method that
the NodeB supports in the uplink.
- SF/2: SF reduction by two
- HIGHER_LAYER_SCHDL: higher layer
scheduling
If both SF/2 and HIGHER_LAYER_SCHDL are
selected, the NodeB supports both of the compression
methods in the uplink.
Bit Field Type SF/2, HIGHER_LAYER_SCHDL
Number of users selected in a UL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value. Interval Type 1~10
Number of users selected in a UL LDR CS domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value. Interval Type 1~10
For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum UL rate is greater than the threshold. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the UL FP mode of this type of RAB. For details of normal mode and silent mode, refer to section 5.1.1 of the 3GPP TS 25.427. Enumeration Type NORMAL, SILENT
Maximum UL rate when coverage of the entire cell is ensured under certain load. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the coverage-based DCCC algorithm is applied to BE services whose maximum UL rate is greater than the threshold. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the UL GBR of the BE service. Enumeration Type D0, D8, D16, D32, D64, D128, D144, D256, D384
Uplink Credit Reserved by Spread Factor for HandOver. SFOFF means that none of them are reserved for handover. If the UL spare resource cant satisfy the reserved resource after the access of a new service, the service will be rejected. If the value is too high, the credit resource reserved for handover UEs will be less, leading to the increased possibility of rejecting handover UE admissions, and performance of handover UEs cannot be guaranteed. If the value is too low, the possibility of rejecting new UEs may increase and some idle resources are wasted. Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF)
If the HS-DPCCH carries ACK/NACK, the system will not perform CAC. If the HS-DPCCH carries CQI, the system will perform CAC. This parameter refers to the resources reserved for the uplink HS-DPCCH carrying ACK/NACK. The corresponding threshold is the uplink limit capacity multiplied by this parameter. If the value is too high, the possibility of wrong rejection to uplink admissions increases, leading to waste in uplink resources. If the value is too low, the uplink resources is insufficient. However, because the possibility of putburst load by ACK/NACK and its impact are relatively low, the value can be set to a low level, representing the loose admission rule. Interval Type 0~100
This parameter specifies the E-DCH data transfer mode of IMS signalling services. It is valid only when IMS signalling services are mapped onto the E-DCH. Enumeration Type SCHEDULED, NON-SCHEDULED
UL activity factor of the R99 interactive service. Interval Type 0~100
The UE can be selected to process load handover only when its bandwidth is less than this threshold. The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell load is decreased. However, high value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the inter-frequency load handover, and the easier it is to maintain the stability of the target cell load. Interval Type 0~400000
The inter-frequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find a qualified target cell for the blind handover. Excessively small value of the parameter, however makes the target cell easily enter the congestion status. The higher the parameter is, the more difficult it is for the inter-frequency blind handover occurs. Interval Type 0~100
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing uplink LDR-AMR voice service rate reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control may occur (the state of basic congestion turns into another extreme--underload). If the parameter value is too low, the LDR action has a slow response and the effect is not apparent, affecting the LDR performance. Interval Type 1~10
Length of smoothing filter window of uplink LDR. Interval Type 1~32
Number of RABs selected in a UL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value. Interval Type 1~10
Reserved SF threshold in uplink credit LDR. The uplink credit LDR could be triggered only when the SF factor corresponding to the uplink reserved credit is higher than the uplink or downlink credit SF reserved threshold. The lower the parameter value is, the easier the credit enters the congestion status, the easier the LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a higher admission success rate because the resource is reserved. The parameter should be set based on the operator's requirement. Enumeration Type SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256)
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
NOACT: No load reshuffling action is taken.
INTERFREQLDHO: The inter-frequency load
handover is performed.
BERATERED: Channels are reconfigured for the BE
service.
QOSRENEGO: The renegotiation on the QoS of the
uncontrollable real-time service is performed.
CSINTERRATSHOULDBELDHO: The inter-RAT
SHOULDBE load handover of the CS domain is
performed.
PSINTERRATSHOULDBELDHO: The inter-RAT
SHOULDBE load handover of the PS domain is
performed.
AMRRATERED (AMR service rate decreasing): The
setting of the TFC subset and the negotiation of the
service rate can be performed for the AMR voice
service.
CSINTERRATSHOULDNOTLDHO: The inter-RAT
SHOULDBE load handover of the CS domain is
performed.
PSINTERRATSHOULDNOTLDHO: The inter-RAT
SHOULDNOTBE load handover of the PS domain is
performed.
The LDR takes the actions in the preset sequence and
judges whether each action is successful. If an action
is unsuccessful, the LDR turns to the next action. If an
action is successful, a parameter is set to NOACT, or
all the preceding actions are taken, the downlink LDR
is finished, and the system waits for the next
triggering of the LDR.
Because each action is performed by its algorithm
module, the LDR algorithm only selects users and
delivers control messages, the execution result of each
action can be obtained after a delay, and the LDR
Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
Number of RABs selected in a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain real-time subscribers. The setting of this parameter is analogous to the setting of BE service rate reduction subscriber number. Because the number of subscribers performing QoS renegotiation may be smaller than the value of this parameter, for example, the candidate subscribers selected for downlink LDR do not meet the QoS renegotiation conditions, you must leave some margin when setting this parameter to ensure the success of load reshuffling. Interval Type 1~10
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The carrier shall make a trade-off between these factors. Interval Type 0~100
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. Enumeration Type NoAct(no action), InterFreqLDHO(inter-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncontrolled real-time traff Qos re-negotiation), CSInterRatShouldBeLDHO(CS domain inter-rat should be load handover), PSInterRatShouldBeLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldNotLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldNotLDHO(PS domain inter-rat should not be load handover)
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The carrier shall make a trade-off between these factors. Interval Type 0~100
This parameter specifies the maximum number of TFCs (Transport Format Combination) allowed in the uplink. The larger the value of this parameter, the larger the number of available TFCs in the uplink. Enumeration Type D16, D32, D48, D64, D96, D128, D256, D512, D1024
Smooth filtering coefficient for UL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. Smoothness is decided by the filtering coefficient of the measurement. The greater the filtering coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the respond to changes of the measured value becomes slower. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
This parameter determines whether automatic or manual mode is used for 3-step adjustment of the uplink intermediate rate. Enumeration Type AUTO_CALC, HAND_APPOINT
Threshold of the UL intermediate rate when the 3-step mode is used for UL rate adjustment and the manual mode is used for UL intermediate rate adjustment. Enumeration Type D16, D32, D64, D128, D144, D256, D384
To adjust the UL AMR speech rate, AMRC delivers the TFC CONTROL command and starts this timer. If no failure message is received when the timer expires, the adjustment of the UL AMR speech rate is successful. Interval Type 1~64000
UL activity factor of the R99 non AMR conversational service. Interval Type 0~100
The percentage of the conversational AMR service
threshold to the 100% uplink load. It is applicable to
algorithm 1 and algorithm 2. The parameter is used
for controlling the AMR service admission. That is,
when an AMR service is accessing, the RNC
evalutates the measurement value of the uplink load
after the service is accessed. If the UL load of a cell is
higher than this threshold after the access of an AMR
speech service, this service will be rejected. If the UL
load of a cell will not be higher than this threshold,
this service will be admitted.
The UL load factor thresholds include parameters of
[UL threshold of Conv non_AMR service], [UL
handover access threshold] and [UL threshold of other
services]. The four parameters can be used to limit the
proportion between the conversational service,
handover user and other services in a specific cell,
and to guarantee the access priority of the
conversational AMR service. If the value is too high
the system load after admission may be over large,
which impacts system stability and leads to system
congestion. If the value is too low, the possibility of
user rejects may increase, resulting in waste in idle
resources.
Interval Type 0~100
The percentage of the handover service admission
threshold to the 100% uplink load. It is applicable to
algorithm 1 and algorithm 2. The parameter is used
for controlling the handover admission. That is, when
a service is handing over to a cell, the RNC evalutates
the measurement value of the uplink load after the
service is accessed. If the UL load of a cell is higher
than this threshold after the access, this service will be
rejected. If the UL load of a cell will not be higher
than this threshold, this service will be admitted.
The UL load factor thresholds include parameters of
[UL threshold of Conv non_AMR service], [UL
handover access threshold] and [UL threshold of other
services]. The four parameters can be used to limit the
proportion between the non-handover service,
handover user and other services in a specific cell,
and to guarantee the access priority of the handover
service. This parameter is to guarantee the access
priority of the handover service. If the value is too
high the system load after admission may be over
large, which impacts system stability and leads to
system congestion. If the value is too low, the
possibility of user rejects may increase, resulting in
waste in idle resources.
Interval Type 0~100
The percentage of the conversational non-AMR
service threshold to the 100% uplink load. It is
applicable to algorithm 1 and algorithm 2. The
parameter is used for controlling the non-AMR
service admission. That is, when a non-AMR service
is accessing, the RNC evalutates the measurement
value of the uplink load after the service is accessed.
If the UL load of a cell is higher than this threshold
after the access of a non-AMR speech service, this
service will be rejected. If the UL load of a cell will
not be higher than this threshold, this service will be
admitted.
The UL load factor thresholds include parameters of
[UL threshold of Conv non_AMR service], [UL
handover access threshold] and [UL threshold of other
services]. The four parameters can be used to limit the
proportion between the conversational service,
handover user and other services in a specific cell,
and to guarantee the access priority of the
conversational non-AMR service. If the value is too
high the system load after admission may be over
large, which impacts system stability and leads to
system congestion. If the value is too low, the
possibility of user rejects may increase, resulting in
waste in idle resources.
Interval Type 0~100
The percentage of other service thresholds to the
100% uplink load. The services refer to other
admissions except the conversational AMR service,
conversational non-AMR service, and handover
scenarios. It is applicable to algorithm 1 and algorithm
2. The parameter is used for controlling other service
admissions. That is, when a service is accessing, the
RNC evalutates the measurement value of the uplink
load after the service is accessed. If the UL load of a
cell is higher than this threshold after the access of a
service, this service will be rejected. If the UL load of
a cell will not be higher than this threshold, this
service will be admitted.
The UL load factor thresholds include parameters of
[UL threshold of Conv non_AMR service], [UL
handover access threshold] and [UL threshold of other
services]. The four parameters can be used to limit the
proportion between the conversational service,
handover user and other services in a specific cell,
and to guarantee the access priority of other services.
If the value is too high the system load after admission
may be over large, which impacts system stability and
leads to system congestion. If the value is too low, the
possibility of user rejects may increase, resulting in
waste in idle resources.
Interval Type 0~100
Length of smoothing filter window of uplink OLC. Interval Type 1~32
UL fast TF restriction refers to a situation where,
when the cell is overloaded and congested, the uplink
TF can be adjusted to restrict the number of blocks
transported in each TTI at the MAC layer and the rate
of user data, thus reducing the cell uplink load.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of RABs selected in executing uplink OLC fast
restriction.
Selection of RABs of the OLC is based on the service
priorities and ARP values and bearing priority
indication. The RAB of low priority is under control.
In the actual system, UlOlcFTFRstrctRabNum and
DlOlcFTFRstrctRabNum can be set on the basis of
the actual circumstances. If the high-rate subscribers
occupy a high proportion, set
UlOlcFTFRstrctRabNum and
DlOlcFTFRstrctRabNum to comparatively low
values. If the high-rate subscribers occupy a low
proportion, set UlOlcFTFRstrctRabNum and
DlOlcFTFRstrctRabNum to comparatively high
values.
The higher the parameters are, the more users are
involved in fast TF restriction under the same
conditions, the quicker the cell load decreases, and the
more user QoS is affected.
Interval Type 1~10
UL fast TF restriction refers to a situation where,
when the cell is overloaded and congested, the uplink
TF can be adjusted to restrict the number of blocks
transported in each TTI at the MAC layer and the rate
of user data, thus reducing the cell uplink load.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of uplink OLC fast TF restriction performed in
entering/exiting the OLC status.
After the overload is triggered, the RNC immediately
executes OLC by first executing fast TF restriction.
The internal counter is incremented by 1 with each
execution. If the number of overloads does not exceed
the OLC action threshold, the system lowers the BE
service rate by lowering TF to relieve the overload. If
the number of overloads exceeds the OLC action
threshold, the previous operation has no obvious
effect on alleviating the overload and the system has
to release users to solve the overload problem.
The lower the parameters are, the more likely the
users are released, resulting in negative effect on the
system performance. If the parameters are
excessively high, the overload status is released
slowly.
Interval Type 0~100
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slow-fading capability, but the lower the signal change tracing capability. For detailed information of this parameter, refer to 3GPP TS 25.433. Enumeration Type D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL overload and congestion control function of the cell is stopped. The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a ping-pong effect. The recommended difference between the OLC release threshold and the OLC trigger threshold is higher than 10%. It is desirable to set the two parameters a bit higher given that the difference between OLC trigger threshold and OLC release threshold is fixed. Interval Type 0~100
User release is an extreme method in reducing the
cell load and recovering the system when the cell is
overloaded and congested.
The mechanism of the OLC is that an action is
performed in each [OLC period] and some services
are selected based on the action rules to perform this
action. This parameter defines the maximum number
of RABs released in executing uplink OLC service
release.
For the users of a single service, the releasing of
RABs means the complete releasing of the users. The
releasing of RABs causes call drops, so
UlOlcFTFRstrctTimes or DlOlcFTFRstrctTimes
should be set to a low value. Higher values of the
parameter get the cell load to decrease more
obviously, but the QoS will be affected.
Interval Type 0~10
UL OLC trigger hysteresis. Interval Type 1~6000
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL overload and congestion control function of the cell is triggered. The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release threshold is, the harder the system releases the overload. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a ping-pong effect. The recommended difference between the OLC release threshold and the OLC trigger threshold is higher than 10%. It is desirable to set the two parameters a bit higher given that the difference between OLC trigger threshold and OLC release threshold is fixed. Interval Type 0~100
Number of users selected in a UL LDR PS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value. Interval Type 1~10
Number of users selected in a UL LDR PS domain inter-RAT SHOULDNOTBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstances. If the high-rate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value. Interval Type 1~10
Rate adjustment switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, UL rate of AMR services can be adjusted. Enumeration Type NO, YES
Inter-frequency handover switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, inter-frequency handover can be performed for AMR services to ensure the QoS. Enumeration Type NO, YES
Inter-RAT handover switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, inter-RAT handover can be performed for AMR services to ensure the QoS. Enumeration Type NO, YES
Timer length for uplink Qos measurement.
This parameter controls the time lengths for the inter-
frequency and inter-RAT measurement based on Qos.
After inter-frequency or inter-RAT measurement
starts, if no inter-frequency handover is performed
when this timer expires, the measurement is stopped,
and the compressed mode is deactivated, if any. If this
parameter is set to 0, this indicates that the timer will
not be started.
For the inter-frequency or inter-RAT measurement
based on coverage, the compressed mode can be
stopped through reporting event 2F. For measurement
that is not based on coverage, event 2F is not reported,
and the timer must be set but should not be set to 0.
As for the impact on network performance:
It reduces the influence of long time compressed
mode to the serving cell.
The compressed mode may be stopped ahead of time,
which can cause the result that the UE fails to initiate
inter-frequency or inter-RAT handover, and thus can
lead to call drops.
Interval Type 0~512
Inter-frequency handover switch of link stability control for UL QoS of VP services. When the parameter is set to YES, inter-frequency handover can be performed for VP services to ensure the QoS. Enumeration Type NO, YES
Rate adjustment switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, UL rate of WAMR services can be adjusted. Enumeration Type NO, YES
Inter-frequency handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, inter-frequency handover can be performed for WAMR services to ensure the QoS. Enumeration Type NO, YES
Inter-RAT handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can be performed for WAMR services to ensure the QoS. Enumeration Type NO, YES
This parameter determines whether the UL rate is lowered to the minimum rate in one step or two steps for BE service set up on DCH in uplink. Enumeration Type 2_Rates, 3_Rates
This parameter determines whether the UL rate is raised to the maximum rate in one step or two steps for BE service set up on DCH in uplink. Enumeration Type 2_Rates, 3_Rates
CM implementation approach selection basis. When
the uplink spreading factor is greater than or equal to
this parameter value, the SF/2 approach will be
preferred. Otherwise, the high layer scheduling will be
preferred.
The SF/2 approach consumes more system resources
and therefore this approach is recommended only for
low-rate users. The high-layer scheduling requires
variable multiplexing positions of transport channels
and is applicable to a relatively narrow range. In
addition, this approach affects the transmission rate of
users and therefore is recommended only when the
SF/2 approach is unavailable or there are high-rate
users.
Enumeration Type D8, D16, D32, D64, D128, D256
UL activity factor of SRB. Interval Type 0~100
This parameter specifies the E-DCH data transfer mode of SRB services. It is valid only when SRB services are mapped onto the E-DCH. Enumeration Type SCHEDULED, NON-SCHEDULED
UL activity factor of the R99 streaming service. Interval Type 0~100
This parameter specifies the default rate threshold for decision to use E-DCH to carry UL PS domain streaming services. When the maximum UL service rate is higher than or equal to this threshold, the service will be carried on E-DCH. Otherwise, it will be carried on DCH. Enumeration Type D8, D16, D32, D64, D128, D144, D256, D384
This parameter specifies the E-DCH data transfer mode of streaming services. It is valid only when streaming services are mapped onto the E-DCH. Enumeration Type SCHEDULED, NON-SCHEDULED
Measurement reporting threshold for triggering event
6A1. The event reporting mode is used.
Event 6A1 is triggered when the measured value is
higher than the absolute threshold 6A1. This event
can trigger UL QoS operation. This parameter
specifies a relative threshold. Absolute threshold of
6A1 = Max Ul Tx Power - UlThd6A1.
Interval Type 0~82
Measurement reporting threshold for triggering event 6A2. The event reporting mode is used. Event 6A2 is triggered when the measured value is higher than the absolute threshold 6A2. When this event report is received, UL rate of AMR or BE services cannot be raised. This parameter specifies a relative threshold. Absolute threshold of 6A2 = Max Ul Tx Power - UlThd6A2. Interval Type 0~82
Measurement reporting threshold for triggering event 6B1. The event reporting mode is used. Event 6B1 is triggered when the measured value is lower than the absolute threshold 6B1. When this event report is received, UL QoS operation is stopped. This parameter specifies a relative threshold. Absolute threshold of 6B1 = Max Ul Tx Power - UlThd6B1. Interval Type 0~82
Measurement reporting threshold for triggering event 6B2. The event reporting mode is used. Event 6B2 is triggered when the measured value is lower than the absolute threshold 6B2. When this event report is received, UL rate of AMR or BE services can be raised. This parameter specifies a relative threshold. Absolute threshold of 6B2 = Max Ul Tx Power - UlThd6B2. Interval Type 0~82
When the algorithm 2 is used, this parameter defines the total equivalent user numbers corresponding to the 100% uplink load. The parameter should be related to the admission threshold and actual condition of the network. If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resources. Interval Type 1~200
This parameter specifies the step size of the closed-loop power control performed on UL DPCH. For details of this parameter, refer to the 3GPP TS 25.214. Interval Type 1~2
Duration when the measured value of VP keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of VP keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Duration when the measured value of VP keeps fulfilling the 6D measurement condition before the event 6D is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported. The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower. Enumeration Type D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
Estimated altitude of an uncertain area in the cell
center in the WGS-84 coordinates.
This is controlled by MTRLGY and valid when
MET~0(metric system). Interval Type 0~990
This parameter specifies the estimated altitude of an
uncertain area in the cell center in the WGS-84
coordinates.
This is controlled by MTRLGY and valid when
IMP~1(British measurement). Interval Type 0~3248
Length of the semi-major axis of an uncertain area in
the cell center.
This is controlled by MTRLGY and valid when
MET~0(metric system).
Interval Type 0~1800000
This parameter specifies the length of the semi-major
axis of an uncertain area in the cell center.
This is controlled by MTRLGY and valid when
IMP~1(British measurement).
Interval Type 0~5905440
Length of the semi-minor axis of an uncertain area in
the cell center.
This is controlled by MTRLGY and valid when
MET~0(metric system).
Interval Type 0~1800000
This parameter specifies the length of the semi-minor
axis of an uncertain area in the cell center.
This is controlled by MTRLGY and valid when
IMP~1(British measurement).
Interval Type 0~5905440
This parameter specifies the number of a UNI link. Interval Type 0~167
This parameter specifies the coefficient of the maximum duration of each counting. The maximum duration is MCCH modification period multiplied by this parameter. Interval Type 2~20
ID of the upper node when ISROOTNODE is NO. Interval Type 0~1999
Number of the upper class transport resource group. This parameter is valid only when [ISFIRSTCLASS] is NO. Interval Type 0~119
This parameter specifies the number of the upper-level logical port that carries the logical port to be added. Interval Type 128~447
A cell can belongs to multiple URAs. This parameter indicates the ID of the first URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the second URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the third URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the fourth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the fifth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the sixth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the seventh URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
A cell can belongs to multiple URAs. This parameter indicates the ID of the eighth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Interval Type 0~65535
ID of the URA in a cell. The URA is only used by the UTRAN and the CN does not know the URA. The URA consists of multiple cells. When the UE enters the URA-PCH state, the location of the UE is identified with the URA ID. For details, refer to the 3GPP TS 25.331 protocol. Interval Type 0~65535
Number of UTRAN Registration Areas (URAs) which the cell belongs to. Enumeration Type D1, D2, D3, D4, D5, D6, D7, D8
Threshold of used frequency quality for triggering
inter-frequency measurement with measurement
quantity of Ec/No for CS domain services.
For CS domain services, if the value of [Inter-
frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions can be met only when the quality
of the used frequency is lower than this threshold
(Event 2B can be triggered only when both conditions
are met.)
To set this parameter, you need to consider the
following factors:
The cell signal quality of the used frequency is better
and can meet the coverage requirements of the current
services.
After handover, even if the inter-frequency
measurement is triggered again, it is very difficult to
hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower
than the start threshold for event 2F or equal to the
threshold of event 2D.
Interval Type -24~0
Threshold of used frequency quality for triggering
inter-frequency measurement with measurement
quantity of RSCP for CS domain services.
For CS domain services, if the value of [Inter-
frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions can be met only when the quality
of the used frequency is lower than this threshold
(Event 2B can be triggered only when both conditions
are met.)
To set this parameter, you need to consider the
following factors:
The cell signal quality of the used frequency is better
and can meet the coverage requirements of the current
services.
After handover, even if the inter-frequency
measurement is triggered again, it is very difficult to
hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower
than the start threshold for event 2F or equal to the
threshold of event 2D.
Interval Type -115~-25
Threshold of used frequency quality for triggering
inter-frequency measurement with measurement
quantity of Ec/No for PS domain HSPA services.
For HSPA services, if the value of [Inter-frequency
measure report mode] is set to EVENT_TRIGGER,
this parameter is used to set the measurement control
of event 2B. One of the necessary conditions can be
met only when the quality of the used frequency is
lower than this threshold (Event 2B can be triggered
only when both conditions are met.)
To set this parameter, you need to consider the
following factors:
The cell signal quality of the used frequency is better
and can meet the coverage requirements of the current
services.
After handover, even if the inter-frequency
measurement is triggered again, it is very difficult to
hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower
than the start threshold for event 2F or equal to the
threshold of event 2D.
Interval Type -24~0
Threshold of used frequency quality for triggering
inter-frequency measurement with measurement
quantity of RSCP for PS domain HSPA services.
For HSPA services, if the value of [Inter-frequency
measure report mode] is set to EVENT_TRIGGER,
this parameter is used to set the measurement control
of event 2B. One of the necessary conditions can be
met only when the quality of the used frequency is
lower than this threshold (Event 2B can be triggered
only when both conditions are met.)
To set this parameter, you need to consider the
following factors:
The cell signal quality of the used frequency is better
and can meet the coverage requirements of the current
services.
After handover, even if the inter-frequency
measurement is triggered again, it is very difficult to
hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower
than the start threshold for event 2F or equal to the
threshold of event 2D.
Interval Type -115~-25
This parameter configures the used frequency
measurement quantity to trigger the inter-RAT
measurement for the purpose of Qos-based handover.
The parameter is valid when the event reporting mode
is selected for inter-RAT.
Ec/No: signal-to-noise ratio
RSCP: received signal code power
CPICH_Ec/NO: the measurement quantity used for
event 2D and 2F, with unit of dB
CPICH_RSCP: the measurement quantity used for
event 2D and 2F, with unit of dBm
The RNC, in the coverage-based inter-RAT
measurement, may configure that the inter-RAT
measurement quantity are delivered according to
event 2D that triggers the measurement, which causes
the result that the Qos-based inter-RAT measurement
cannot refer to the coverage-based configurations.
Under this condition, it is necessary for the Qos-based
inter-RAT measurement to set the used frequency
separately. When both the Qos-based and the
coverage-based inter-RAT measurements exist, refer
to this parameter.
As for the impact on network performance:
When the UE moves to the cell border, and there is a
intra-frequency neighboring cell in the moving
direction, CPCICH Ec/No varies faster than RSCP
and the quality of the current cell should be evaluated
according to CPCICH Ec/No. When there is no intra-
frequency neighboring cell in the direction, CPCICH
RSCP varies faster than Ec/No and the quality should
be evaluated according to CPCICH RSCP. If the
measurement quantity is not properly selected, the
handover may not be performed timely, thus resulting
in call drops.
Enumeration Type CPICH_EC/NO, CPICH_RSCP
Threshold of used frequency quality for triggering
inter-frequency measurement with measurement
quantity of Ec/No for PS domain non-HSPA services.
For PS domain non-HSPA services, if the value of
[Inter-frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions can be met only when the quality
of the used frequency is lower than this threshold
(Event 2B can be triggered only when both conditions
are met.)
To set this parameter, you need to consider the
following factors:
The cell signal quality of the used frequency is better
and can meet the coverage requirements of the current
services.
After handover, even if the inter-frequency
measurement is triggered again, it is very difficult to
hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower
than the start threshold for event 2F or equal to the
threshold of event 2D.
Interval Type -24~0
Threshold of used frequency quality for triggering
inter-frequency measurement with measurement
quantity of RSCP for PS domain non-HSPA services.
For PS domain non-HSPA services, if the value of
[Inter-frequency measure report mode] is set to
EVENT_TRIGGER, this parameter is used to set the
measurement control of event 2B. One of the
necessary conditions can be met only when the quality
of the used frequency is lower than this threshold
(Event 2B can be triggered only when both conditions
are met.)
To set this parameter, you need to consider the
following factors:
The cell signal quality of the used frequency is better
and can meet the coverage requirements of the current
services.
After handover, even if the inter-frequency
measurement is triggered again, it is very difficult to
hand over the UE again to the cell of currently used
frequency. That is, this parameter is usually set lower
than the start threshold for event 2F or equal to the
threshold of event 2D.
Interval Type -115~-25
This parameter specifies whether to use FE or not. Enumeration Type Disable, Enable
This parameter specifies whether the Mac-ehs entity is applied. Enumeration Type NOTUSED, USED
This parameter specifies whether to use MP or not. Enumeration Type Disable, Enable
This parameter specifies whether to use the second ESN or not. Enumeration Type Disable, Enable
Indicating whether HCS is used. For details, refer to 3GPP TS 25.304. Enumeration Type USED, NOT_USED
This parameter specifies whether to use PPP or not. Enumeration Type Disable, Enable
The ratio of the users which could launch the
handover to inter-RAT neighbour cell.
When the parameter is ALL_USER, it means all of
the users could be handover to the inter-RAT
neighbour cell. When the parameter is HALF, it
means only 1/2 of the users could be handover to the
inter-RAT neighbour cell. When the parameter is
THIRD, it means only 1/3 of the users could be
handover to the inter-RAT neighbour cell. When the
parameter is QUARTER, it means only 1/4 of the
users could be handover to the inter-RAT neighbour
cell.
Enumeration Type ALL_USER(All User), HALF(Half), THIRD(THIRD), QUARTER(QUARTER)
Percentage of User Plane Sharing Out Offset. Interval Type 5~20
Percentage of User Plane Sharing Out threshold. Interval Type 50~100
This parameter specifies the user priority. The user classes in descending order of priority are Gold, Silver, and then Copper. Enumeration Type GOLD, SILVER, COPPER
This parameter specifies whether to use TRUNK or not.Enumeration Type Disable, Enable
This parameter specifies the unit of the peak rate, average rate, and minimum rate. Enumeration Type CELL/S, KBIT/S
VCI of the PVC from which the AAL2 Path goes out of the RNC. Interval Type 32~65535
This parameter specifies the type of check on the VCL. Enumeration Type CC, LOOPBACK
VLAN ID flag. Enumeration Type DISABLE, ENABLE
This parameter specifies the VLAN ID of the destination IP address. Interval Type 2~4094
This parameter specifies the VLAN priority. Interval Type 0~7
AMR voice service downlink factor. Interval Type 0~100
AMR voice primary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
AMR voice primary path load threshold. Interval Type 0~100
AMR voice secondary path. Enumeration Type CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
AMR voice primary secondary path load ratio threshold. Interval Type 0~100
AMR voice service uplink factor. Interval Type 0~100
This parameter specifies the channel type of VoIP
services.
- DCH: Both uplink and downlink are preferably
carried on DCH.
- HSDPA: Uplink is preferably carried on DCH, and
downlink is preferably carried on HS-DSCH.
- HSPA: Uplink is preferably carried on E-DCH, and
downlink is preferably carried on HS-DSCH.
Enumeration Type DCH(UL_DCH,DL_DCH), HSDPA(UL_DCH,DL_HSDSCH), HSPA(UL_EDCH,DL_HSDSCH)
This parameter decides E-DCH TTI type for VOIP traffic. Enumeration Type EDCH_TTI_10ms, EDCH_TTI_2ms
This parameter specifies whether the alarm reporting for 24 V power is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the upper threshold for 24 V power alarm. String Type -
This parameter specifies the lower threshold for 24 V power alarm. String Type -
This parameter specifies whether the alarm reporting for 48 V power is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter specifies the upper threshold for 48 V power alarm. String Type -
This parameter specifies the lower threshold for 48 V power alarm. String Type -
This parameter specifies the index of a cross connection. Interval Type 0~1399
VPI of the PVC from which the AAL2 Path goes out of the RNC. Interval Type 0~255
This parameter indicating whether VP limit in cell. TRUE indicates that the VP need limit in cell. FALSE indicates that the VP need not limit in cell. Enumeration Type TRUE, FALSE
When the parameter is set to YES, the QOS control algorithm is used for VP services. When the parameter is set to NO, the QOS control algorithm is not used for VP services.The QOS action of VP services only includes inter frequency handover. Enumeration Type NO, YES
VP CDR(Call Drop Ratio) Per Spu, if the ratio is higher than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
The minimum number of VP service setup attempt Per Spu, the sum of VP service setup attempt need to be higher than this threshold to arise KPI alarm which type is VP service successful setup ratio. Interval Type 0~65534
Successful VP service setup ratio Per Spu, if the ratio is lower than this threshold in a checking period, need arise KPI alarm. Interval Type 0~100
The Minimum number of VP release Per Spu, the sum of VP release need to be higher than this threshold to trigger arise KPI alarm which type is VP call drop ratio. Interval Type 0~65534
Timer for triggering a second adjustment of the UL WAMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledgement after the UL WAMR mode adjustment when the associated command is delivered. The UL WAMR rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement report is received. If no measurement report is received when the UL AMRC timer expires, you can infer that the measured value remains in the same state as that before the previous UL AMRC mode adjustment. The previous AMRC mode adjustment is not effective, and another adjustment is required. The longer the UL AMRC timer is, the less frequently the AMRC mode is adjusted. In addition, the response to measurement reports becomes slower accordingly. Interval Type 20~64000
This parameter specifies whether the alarm reporting for water is enabled. Enumeration Type CLOSE(Close), OPEN(Open)
This parameter is used to determine the relative
threshold of the soft handover based on the
measurement of each cell in the active set. The larger
the value of the parameter is, the higher the relative
threshold is under the same conditions. When Weight
is set to 0, the SHO relative threshold depends on only
the best cell of the active set. For the definition, refer
to 3GPP TS 25.331.
When the parameter equals 0, the general quality of
the active set is the measurement of the best cell and
the SHO relative threshold depends on only the best
cell in the active set. When the parameter equals 1, it
can be regarded as the equivalent signal strength
when maximum ratio combination of down links of all
cells in the active set is implemented.
As for the impact on network performance:
The larger the value of the parameter is, the higher
thresholds for triggering events 1A and 1B are
obtained under the same condition, and the more
difficult it is for the cell to join the active set, and the
easier it is for the cell to leave the active set. The
smaller the value of the parameter is, the easier it is
for the cell to join the active set, and the more difficult
it is for the cell to leave the active set.
Interval Type 0~20
Weight used for computing frequency general
quality.
The larger the value of this parameter, the higher the
calculated general quality of the active set. When this
parameter is set to 0, the general quality of the active
set is the quality of the best cell in the active set. For
details about this parameter, refer to the subsection of
frequency quality estimation in the section of inter-
frequency measurement in 3GPP TS 25.331. This
parameter is used for all event-triggered inter-
frequency measurements, including those triggered by
events 2D, 2F, 2B and 2C. The parameter, however, is
not used for periodical inter-frequency measurements.
The larger the value of this parameter, the higher the
estimated quality of the current frequency in the same
condition, and the more difficult to trigger inter-
frequency handover. The smaller the value of this
parameter, the lower the estimated quality of the
current frequency, and the easier to trigger inter-
frequency handover. Generally, this parameter is set
to 0 or 1. Whether the handover is easy or difficult to
trigger is not decided by the way of setting this
parameter.
Interval Type 0~20
Size of the sliding window.It can be used to control the transmission rate of the peer end. Interval Type 1~32767
Work mode of M3UA link set. Enumeration Type M3UA_ASP, M3UA_IPSP
This parameter specifies the flag of the workspace to be formatted. Enumeration Type Active(Format active area), Standby(Format standby area)
This parameter specifies the work mode. The setting of this parameter should be consistent with that at the peer end. Enumeration Type E1_UNBA(E1 Unbalance), E1_BA(E1 Balance), T1(T1), E1(E1)
This parameter specifies the time to wait before the restoration. Interval Type 30~60000
This parameter specifies the X offset for connected mode. For a PTM service in a cell, X UEs that receive this service need to retain in connected mode, so as to reduce triggering of counting on the Uu interface during recounting. The value of X = [PARA]NCountingThd[/PARA] + [PARA] XOffset[/PARA]. Interval Type 1~5
For the PS BE service at a rate of 0 kbit/s, this parameter is used for the rate upsizing for DCCC triggered by event 4A. Unsuccessful rate upsizing indicates that the resources are insufficient in the cell. The service may run at a rate of 0 kbit/s for a long time. If the timer is started, the 0 kbit/s service of the UE is released after the timer expires. If the length is set to 0, the timer is not started. Interval Type 0~65535
This parameter specifies the time zone where the RNC located. Enumeration Type GMT-1200(GMT-12:00), GMT-1100(GMT-11:00), GMT-1000(GMT-10:00), GMT-0930(GMT-09:30), GMT-0900(GMT-09:00), GMT-0800(GMT-08:00), GMT-0700(GMT-07:00), GMT-0600(GMT-06:00), GMT-0500(GMT-05:00), GMT-0430(GMT-04:30), GMT-0400(GMT-04:00), GMT-0330(GMT-03:30), GMT-0300(GMT-03:00), GMT-0200(GMT-02:00), GMT-0100(GMT-01:00), GMT(GMT), GMT+0100(GMT+01:00), GMT+0200(GMT+02:00), GMT+0300(GMT+03:00), GMT+0330(GMT+03:30), GMT+0400(GMT+04:00), GMT+0430(GMT+04:30), GMT+0500(GMT+05:00), GMT+0530(GMT+05:30), GMT+0545(GMT+05:45), GMT+0600(GMT+06:00), GMT+0630(GMT+06:30), GMT+0700(GMT+07:00), GMT+0800(GMT+08:00), GMT+0900(GMT+09:00), GMT+0930(GMT+09:30), GMT+1000(GMT+10:00), GMT+1030(GMT+10:30), GMT+1100(GMT+11:00), GMT+1130(GMT+11:30), GMT+1200(GMT+12:00), GMT+1245(GMT+12:45), GMT+1300(GMT+13:00), GMT+1400(GMT+14:00)
Actual Value Range Unit Default Value Recommended Value
R99,HSPA,SHARE None - None
00:00:00~23:59:59 s - None
0~7 None 0 0
0~7 None 0 0
0~7 None 0 0
0~7 None 0 0
0~7 None 0 0
0~7 None 0 0
0~7 None 0 0
ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7 None - None
Disable (not support the address and control field compress function), Enable (support the address and control field compress function) None
Enable Enable
10~360000, step:10 ms - 50
1~36000 s - 100
AC0,AC1,AC2,AC3,AC4,AC5,AC6,AC7,AC8,AC9,AC10,AC11,AC12,AC13,AC14,AC15 None
-

AC0:BARRED,AC1:BAR
RED,AC2:BARRED,AC3:
BARRED,AC4:BARRED,
AC5:BARRED,AC6:BAR
RED,AC7:BARRED,AC8:
BARRED,AC9:BARRED(
SET DSACAUTOALGO)
None(ADD
CELLDSACMANUALPA
RA)
AC0,AC1,AC2,AC3,AC4,AC5,AC6,AC7,AC8,AC9,AC10,AC11,AC12,AC13,AC14,AC15 None - None
6~3600 s
-
10(SET
DSACAUTOALGO)
30(SET ACALGO)
None(ADD
CELLDSACMANUALPA
RA)
0.1~1, step:0.1 per cent - 2
OFF, ON None - OFF
LOCAL,SHARE None LOCAL LOCAL
GPS(Global Position System),DGPS(Differential Global Position System),BOTH(both GPS and DGPS) None - None
1 to 95 per cent - None
NOPRIORITY, GOLD, SILVER, COPPER None - None
INACTIVE, ACTIVE None ACTIVE ACTIVE
NODELIVERY, DELIVERYNone - NODELIVERY
UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_ASSISTED_PREFERRED None - UE_BASED
0 to 65534 None
- None
RNC(Local RNC), NODEB(Local NodeB), NRNC_RNC(Nearby RNC), NRNC_NODEB(NodeB in RNC) None - None
-22~5 dB -6 -6
0~1 None 1 1
1~65535 None
- None
BIT_ALIGN, OCTET_ALIGN None - None
0~4000000 kbit/s - None
Manual, Automatic None Automatic Automatic
-1000 to 10000 m - None
-3281~32810 None - None
Critical,Major,Minor,WarningNone - None
0~62, 63: Infinity None
4(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
4
0~62, 63: Infinity None
1(ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
1
0~62, 63: Infinity None
4(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
4
0~62, 63: Infinity None
1(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
1
SENDER_PARA, RECEIVE_PARA, FLOWCONTROL_PARA None - None
NO, YES None - NO
0~100 None - 5
0~65534 None - 100
0~100 None - 90
0~65534 None - 200
20~64000 ms - 3000
0~1999 None
- None
-32767~32767 m - None
-107502~107502 m - None
-90~90, step: 0.000001 degree - None
-90~90 second - None
-180~180, step: 0.000001 degree - None
-180~180 second - None
0~360, step: 0.1 degree - None
0~360, step: 0.1 degree - None
FALSE,TRUE None FALSE FALSE
NBAP, M3UA None - None
APPLIED_ON_UPLINK, APPLIED_ON_DOWNLINK, APPLIED_ON_BOTH None - None
PRIMARY,STANDBY,ALLNone ALL ALL
PRIMARY, STANDBY, ALLNone Primary Primary
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
Gold,Silver,Copper None - None
3 to 10 None 3 3
300 to 1000 ms 3 3
0 to 255 None - None
14 to 27 None - None
0 to 5 None - None
NOT_ALLOWED,ALLOWED None ALLOWED ALLOWED
SERVER(sever mode), CLIENT(client mode) None
- None
0 to 63 character None
- None
0 to 15 character None
- None
NO_V(not verify), PAP_V(PAP verify), CHAP_V(CHAP verify) None
NO_V NO_V
ENABLE, DISABLE None - ENABLE
0~15 None 7 7
0~15 None 0 0
0~15 None 15 15
0~65535000 step:1000 None - None
LOW,HIGH None - None
OFF, ON None - None
OFF, ON None - None
-112~-50,step:0.1 dBm 61 61
0 to 128 characters None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed None
-(ADD
NRNCCELL,AD
D
QUICKCELLSET
UP,ADD
CELLSETUP)

GSM900_DCS18
00_BAND_USED
(ADD
None(ADD
NRNCCELL,ADD
QUICKCELLSETUP,ADD
CELLSETUP)

GSM900_DCS1800_BAN
D_USED(ADD
GSMCELL)
1~1000 kbit/s - CONVERSATIONAL:7; STREAMING:8; INTERACTIVE,BACKGROUND:64
0~7 None - None
0~1023 None - None
-35~15,step:0.1 dB 0 0
-35~15,step:0.1 dB -30 -30
-35~15, step: 0.1 dB -20 -20
R99, HSPA None - None
MTP3, M3UA None - None
5 None 5 5
2 None 2 2
1~60 s 1 1
8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D384
1~65535 s - 5
1~65535 s - 5
1~65535 s - 5
1~65535 s - 5
None, RateDegrade, InterFreqHO, InterRatHO None - RateDegrade
None, RateDegrade, InterFreqHO, InterRatHO None - None
None, RateDegrade, InterFreqHO, InterRatHO None - None
1~65535 s - 5
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
1~65535 s - 65535
1~65535 s - 5
1~65535 s - 5
250, 500, 1000, 2000, 4000, 8000, 16000 ms - D1000
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D64
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D5000
8,16,32,64,128,144,256,384,608,1440,2048,2880 kbit/s - D1440
0~1024 s - 20
0~10, step: 0.1 dB
10(ADD
CELLDCCC)
-(SET DCCC)
10
NO, YES None - YES
1~15 None - None
1~15 None - None
None, RateDegrade, InterFreqHO, InterRatHO None - None
None, RateDegrade, InterFreqHO, InterRatHO None - None
None, RateDegrade, InterFreqHO, InterRatHO None - None
SINGLE, COMBINE None - SINGLE
NO, YES None - YES
NO, YES None - YES
NO, YES None - NO
20~64000 ms - 3000
3 to 10 None 3 3
1~1000 kbit/s 32 32
1~2000 kbit/s 512 512
0.1~40, step:0.1 dB 100 100
1~6000 s 120 120
hour{0~23}, min{0~59}, sec{0~59} None - 06&00&00
0~10 None 0 0
hour{0~23}, min{0~59}, sec{0~59} None - 01&00&00
OFF, ON None ON ON
0.1~10, step:0.1 dBm 5 5
5*10^(-7)~1 None - None
FALSE,TRUE None
FALSE FALSE
1,2,4,8 None - D2
250,500 ms - D250
0~30 None - None
-115~-25 dBm -92 -92
-115~-25 dBm
-115(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
-115
2000~60000 ms - 5000
nonrpt,rpt None - None
INT,DPU,XPU None - None
PEUa,AEUa,FG2a,GOUa,AOUa,POUa,UOIa,SPUa,DPUb None - None
FG2a, GOUa None - None
PEUa, POUa, UOIa None - None
PEUa,POUa None - None
REQUIRED, NOT_REQUIRE None

REQUIRED(AD
D
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHOC
OV,SET
INTERRATHON
COV)
REQUIRED
AEUa,AOUa,PEUa,POUa None - None
AEUa, PEUa, AOUa, POUa None - None
AEUa, PEUa, AOUa, POUa None - None
SCUa, GCUa, GCGa, SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, ALL None - None
AEUa, PEUa, AOUa, POUa, UOIa None - None
AEUa, PEUa, AOUa, POUa None - None
SCUa, GCUa/GCGa, SPUa, DPUb, AEUa/PEUa/AOUa/FG2a/GOUa/POUa/UOIa, MPU None - None
AEUa, AOUa None - None
AOUa, POUa, UOIa None - None
AEUa, AOUa, UOIa None - None
OFF, ON None OFF OFF
0 to 1000000 kbit/s
0 0
0~100000 kbit/s 0 0
AOUa/AEUa: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000 kbit/s 0 0
0~320000 kbit/s 0 0
0~3000000 kbit/s 0 0
0~4000000 kbit/s 0 0
0 to 1000000 kbit/s
0 0
0~200000 kbit/s 0 0
AOUa/AEUa: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000 kbit/s 0 0
0~320000 kbit/s 0 0
0~3000000 kbit/s 0 0
0~4000000 kbit/s 0 0
0 to 1000000 kbit/s
0 0
0~50000 kbit/s 0 0
AOUa/AEUa: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000 kbit/s 0 0
0~320000 kbit/s 0 0
0~3000000 kbit/s 0 0
0~4000000 kbit/s 0 0
100~1000 per cent 120 120
FULL_DUPLEX, HALF_DUPLEX None - None
0~100 per cent 25 25
NODEB_CREDIT_CAC_SWITCH None - ON
SYS_LEVEL,NODEB_LEVEL,CELL_LEVEL None -
SYS_LEVEL:ON
NODEB_LEVEL:ON
CELL_LEVEL:ON
1~5 s - 3
NONE,DCH,HSPA None - NONE
0~5 None - None
NULL, IPLGCPORT, RSCGRP None NULL NULL
0 to 31 None
- None
0 to 83 None
- None
SAAL, SCTP, SAAL-SCTP None
- None
0 to 3 None
- None
0~3 None - None
14~27 None
- None
0~5 None - None
ETHER PPP TRUNK None - None
IMA,UNI,FRA,NCOPT,ATMLOGICPORT None - None
UNI, IMA, FRAATM, NCOPT, ATMLGCPORT, NULL None
- None
0 to 167 None
- None
32~65535 None
- None
0~255 None
- None
0 to 383 None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
4500~32767 byte 4500 4500
0~3 None - None
0~65535 None
- None
OFF, ON None - OFF
1~1000 kbit/s 32 32
1~2000 kbit/s 512 512
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
10,100,1000 ms 1000 1000
AUTO,MANUAL None AUTO AUTO
UNI: 700~1000
NNI: 100~1000 ms 1000
UNI: 1000
NNI: 200
102400 to 1330000000 ns 1024 1024
1~100 None - 15
-32767~32767 m - None
-107502~107502 m - None

TX_DIVERSITY_ON_TO
_OFF,
TX_DIVERSITY_OFF_TO
_ON
None - None
DELAY_ACTIVATION_SUPPORT,HSDSCH_SUPPORT,FDPCH_SUPPORT,EDCH_SUPPORT,EDCH_2MS_TTI_SUPPORT,EDCH_2SF2_AND_2SF4_SUPPORT,EDCH_2SF2_SUPPORT,EDCH_2SF4_SUPPORT,EDCH_SF4_SUPPORT,EDCH_SF8_SUPPORT,EDCH_HARQ_IR_COMBIN_SUPPORT,EDCH_HARQ_CHASE_COMBIN_SUPPORT,CPC_DTX_DRX_SUPPORT,CPC_HS_SCCH_LESS_OPER_SUPPORT,HSPAPLUS_MIMO_SUPPORT,HSPAPLUS_UL_16QAM_SUPPORT,FLEX_MACD_PDU_SIZE_SUPPORT,FDPCH_SLOT_FORMAT_SUPPORT,HSPAPLUS_DL_64QAM_SUPPORT None - None
-32767~32767 m - None
-107502~107502 m - None
-90~90, step: 0.000001 degree - None
-90~90 second - None
-180~180, step: 0.000001 degree - None
-180~180 second - None
ALLCELL,3GCELL,GSMCELL None - None
NLOS_ENVIRONMENT, LOS_ENVIRONMENT, MIXED_ENVIRONMENT None MIXED_ENVIRONMENT MIXED_ENVIRONMENT
TU, RA, HT None TU TU
-10000~10000 m - None
-32808~32808 m - None
1~100 None - 15
SINGLE_HOST, DOUBLE_HOST None SINGLE_HOST SINGLE_HOST
0~65535 None
- None
1~31 d - 10
OFF,ON None - OFF
INACTIVE, ACTIVE None ACTIVE ACTIVE
UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_ASSISTED_PREFERRED None - UE_ASSISTED
SF4, SF8, SF16, SF32, SF64, SF128, SF256 None SF8 SF8
CELL_ANTENNA, CELL_CENTER, BOTH None - None
1~31 characters None
- None
0~1, step:0.01 per cent 90 90
1~65535 None - 9
1~65535 s - 180
RESERVED, NOT_RESERVED None NOT_RESERVEDNOT_RESERVED
RESERVED, NOT_RESERVED None NOT_RESERVEDNOT_RESERVED
AFFECT,NOT_AFFECT None AFFECT AFFECT
AFFECT,NOT_AFFECT None AFFECT AFFECT
1~100 None - 45
0~1, step:0.01 per cent 30 30
NOT_REQUIRE, REQUIRENone
- None
CFG_DL_BLIND_DETECTION_SWITCH, CFG_HSDPA_64QAM_SWITCH, CFG_HSDPA_MIMO_SWITCH, CFG_HSPA_DTX_DRX_SWITCH, CFG_HSPA_HSSCCH_LESS_OP_SWITCH, CFG_IMS_SUPPORT_SWITCH, CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITCH, CFG_LOSSLESS_RELOC_CFG_SWITCH, CFG_MULTI_RAB_SWITCH, CFG_PDCP_IPV6_HEAD_COMPRESS_SWITCH, CFG_PDCP_RFC2507_HC_SWITCH, CFG_PDCP_RFC3095_HC_SWITCH None - CFG_DL_BLIND_DETECTION_SWITCH:ON, CFG_HSDPA_64QAM_SWITCH:ON, CFG_HSDPA_MIMO_SWITCH:ON, CFG_HSPA_DTX_DRX_SWITCH:OFF, CFG_HSPA_HSSCCH_LESS_OP_SWITCH:OFF, CFG_IMS_SUPPORT_SWITCH:ON, CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITCH:OFF, CFG_LOSSLESS_RELOC_CFG_SWITCH:OFF, CFG_MULTI_RAB_SWITCH:ON, CFG_PDCP_IPV6_HEAD_COMPRESS_SWITCH:OFF, CFG_PDCP_RFC2507_HC_SWITCH:OFF, CFG_PDCP_RFC3095_HC_SWITCH:OFF
0~999 s - 2
0~180 s - 5
NO_CODING,CONVOLUTIONAL,TURBO None CONVOLUTIONAL CONVOLUTIONAL
1~5 None 5 5
CH0,CH1,CH2,CH3,CH4 None - None
0 to 31 None
- None
NO, YES None NO NO
NO, YES None NO NO
ALDER32, CRC32 None CRC32 CRC32
SBFD, ARP, MBFD None - None
TEN_MSEC, MIN None
- TEN_MSEC
TEN_MSEC, MIN None
- TEN_MSEC
TEN_MSEC, MIN None
- TEN_MSEC
TEN_MSEC, MIN None
- TEN_MSEC
TEN_MSEC, MIN None - TEN_MSEC
TEN_MSEC, MIN None
- TEN_MSEC
TEN_MSEC, MIN None
- TEN_MSEC
TEN_MSEC, MIN None

TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
TEN_MSEC
TEN_MSEC, MIN None

TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
TEN_MSEC
TEN_MSEC, MIN None

TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
TEN_MSEC
TEN_MSEC, MIN None

TEN_MSEC(AD
D
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
TEN_MSEC
OFF,ON None - None
0~65535 None - None
-10~10, step: 0.5 dB
0 0
-50~50 dB 0 0
-50~50 dB 0 0
-20~20 dB
0 0
64~64000 step:64 kbit/s - None
GCUa,GCGa None - None
TRUE, FALSE None False False
UL_ONLY, DL_ONLY, UL_DL_BOTH None UL_DL_BOTH UL_DL_BOTH
WALKING_SPEED_AND_HOT_SPOT_CELL,MID_SPEED_AND_HOT_SPOT_CELL,HIGH_SPEED_AND_HOT_SPOT_CELL,LOW_SPEED_AND_MEDIUM_COVERAGE_CELL,HIGH_SPEED_AND_MEDIUM_COVERAGE_CELL,LOW_SPEED_AND_HIGH_COVERAGE_CELL,HIGH_SPEED_AND_HIGH_COVERAGE_CELL,PICO_NODEB_TYPE_COVERAGE_CELL,OTHER_CELL None

WALKING_SPE
ED_AND_HOT_
SPOT_CELL(AD
D CELLCMCF)
-(SET CMCF)
WALKING_SPEED_AND
_HOT_SPOT_CELL
CMCF_DL_HLS_SWITCH, CMCF_UL_HLS_SWITCH, CMCF_UL_PRECFG_TOLERANCE_SWITCH, CMCF_WITHOUT_UE_CAP_REPORT_SWITCH None - CMCF_DL_HLS_SWITCH:OFF, CMCF_UL_HLS_SWITCH:OFF, CMCF_UL_PRECFG_TOLERANCE_SWITCH:OFF, CMCF_WITHOUT_UE_CAP_REPORT_SWITCH:OFF
1~10000 ms - 5000
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH, CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITCH, CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWITCH, CMP_IUR_SHO_DIVCTRL_SWITCH, CMP_UU_AMR_SID_MUST_CFG_SWITCH, CMP_UU_DST_SERV_CELL_D2E_SWITCH, CMP_UU_IGNORE_UE_RLC_CAP_SWITCH, CMP_UU_SERV_CELL_CHG_WITH_ASU_SWITCH, CMP_UU_SERV_CELL_CHG_WITH_RB_MOD_SWITCH, CMP_UU_VOIP_UP_PROC_AS_NORMAL_PS_SWITCH, CMP_UU_FDPCH_COMPAT_SWITCH, CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH, CMP_IU_QOS_ASYMMETRY_IND_COMPAT_SWITCH None -
CMP_IU_IMS_PROC_AS
_NORMAL_PS_SWITCH:
OFF,
CMP_IU_SYSHOIN_CMP
_IUUP_FIXTO1_SWITCH
:OFF,
CMP_IUR_H2D_FOR_LO
WR5_NRNCCELL_SWIT
CH:OFF,
CMP_IUR_SHO_DIVCTR
L_SWITCH:OFF,
CMP_UU_AMR_SID_MU
ST_CFG_SWITCH:OFF,
CMP_UU_DST_SERV_CE
LL_D2E_SWITCH:OFF,
CMP_UU_IGNORE_UE_
RLC_CAP_SWITCH:ON,
CMP_UU_SERV_CELL_C
HG_WITH_ASU_SWITC
H:OFF,
CMP_UU_SERV_CELL_C
HG_WITH_RB_MOD_SW
ITCH:ON,
CMP_UU_VOIP_UP_PRO
C_AS_NORMAL_PS_SWI
TCH:ON,
CMP_UU_FDPCH_COMP
AT_SWITCH:OFF,
CMP_UU_AMR_DRD_H
HO_COMPAT_SWITCH:
OFF,
CMP_IU_QOS_ASYMME
TRY_IND_COMPAT_SWI
TCH:OFF
CS_DOMAIN,PS_DOMAINNone
- None
0~4095 None
- None
NORMAL,OFFLOAD,INHIBITED None - Normal
SHARE, EXCLUSIVE None - None
0 to 3 None - None
1~31 characters None - None
0~31 None - None
0~31 None
- None
1~31 characters None - None
0~3,5~31 None - None
0~3 None
- None
0~3,5~31 None - None
0~3,5~31 None - None
0~3,5~31 None - None
0~3,5~31 None - None
5~31,255 None 255 255
1,2,3,4 None - None
R99,R4,R5,R6,R7 None - None
To enlarge the throughout of HSDPA when the NodeB automatic code algorithem is enabled, it's recommended that the sharing codes adjacent to HSDPA code to be free as possible as it can, when the [Code Adjust switch for Hsdpa] is set to ON,the RNC will select R99 UE to do code adjusting which will free the sharing codes adjacent to HSDPA code None ON ON
1~16 None 3 3
0~100 per cent
-(SET DRD)
13(ADD
CELLDRD)
13
SF4, SF8, SF16, SF32, SF64, SF128, SF256 None
-(SET DRD)
SF8(ADD
CELLDRD)
SF8
ON, OFF None
-(SET DRD)
OFF(ADD
CELLDRD)
OFF
FALSE, TRUE None FALSE FALSE
GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGUESE, FINNISH, NORWEGIAN, GREEK, TURKISH, HUNGARIAN, POLISH, LANGUAGEUNSPECIFIED None - ENGLISH
COEXIST_MEAS_THD_CHOICE_INTERFREQ,COEXIST_MEAS_THD_CHOICE_INTERRAT None

COEXIST_MEA
S_THD_CHOICE
_INTERFREQ(A
DD
CELLHOCOMM)
-(SET
HOCOMM)
COEXIST_MEAS_THD_C
HOICE_INTERFREQ
0~1,step: 0.01 per cent - 70
0~10, step: 0.1 dB
20(ADD
CELLDCCC)
-(SET DCCC)
20
NON-SUPPORTING_UE_ONLY,BOTH,NEITHER None - NON-SUPPORTING_UE_ONLY
1~7 s 2 2
30~90 s 30 30
10~200 ms 10 10
10 to 150 ms 15 IP:15; ATM:20
10 to 150 ms 15 IP:15; ATM:20
10 to 150 ms 15 IP:15; ATM:20
10 to 150 ms 15 IP:15; ATM:25
10 to 150 ms 25 25
10 to 150 ms 25 25
10 to 150 ms 25 IP:25; ATM:30
10 to 150 ms 25 IP:25; ATM:30
10 to 150 ms 25 IP:25; ATM:30
10 to 150 ms 25 IP:25; ATM:50
10 to 150 ms 50 50
10 to 150 ms 50 50
BARRED, NOT_BARRED None - None
OFF, Only_To_Inter_Frequency, Allowed_To_Inter_RAT None - Only_To_Inter_Frequency
ALLOWED, NOT_ALLOWED None NOT_ALLOWED NOT_ALLOWED
YES,NO None NO NO
0~40, step:2 dB 2 2
{0~40},{255}, step:2 dB - 2
-50~50 dB
0 0
-50~50 dB
0 0
{-32~20},{127}, step:2 dB 127 127
{-32~20},{127}, step:2 dB 127 127
10, 20, 40, 80, 160, 320, 640, 1280 s D1280 D1280
-35~-10 dB -20 -20
Context,Context_Group,All_Contexts None - None
NO,YES None NO NO
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s - D16
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s - D16
1~1000 kbit/s 32 32
1~2000 kbit/s 512 512
6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85 kbit/s

WBAMR_BITRA
TE_23.85K(ADD
CELLAMRCWB)
-(SET
AMRCWB)
WBAMR_BITRATE_23.8
5K
4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20 kbit/s

NBAMR_BITRA
TE_12.20K(ADD
CELLAMRC)
-(SET AMRC)
NBAMR_BITRATE_12.20
K
1 to 28 None 5 5
1024~4294967295 None - None
ON,OFF None - None
CP1_Supported, CP1_not_Supported None
CP1_not_Support
ed
CP1_not_Supported
0,1,2,4,8,16,32,64,128,256,512,INFINITY None - None
0,2,4,8,10,20,40,80,160,16,32,64 ms - None
1~16 None 8 8
UNAVAILABLE, AVAILABLE None UNAVAILABLE UNAVAILABLE
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF43.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
When the interface type is
Iu-CS, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF43.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-CS, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 100 100
0 to 61200 Erl - None
0~100% per cent
80(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
80
OFF, ON None - OFF
60~900 s - 900
SUPP_NONE,SUPP_IUFLEX,SUPP_MOCN,SUPP_IUFLEX_MOCN None - SUPP_NONE
1~10 None - None
FALSE,TRUE None
-
TRUE(SET
DSACAUTOALGO)
None(ADD
CELLDSACMANUALPA
RA)
ON,OFF None OFF OFF
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF43.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
When the interface type is
Iu-CS, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF43.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-CS, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 100 100
CS_AMRC_SWITCH, CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_SWITCH, CS_IUUP_V2_SUPPORT_SWITCH, CS_ZERO_C_AMR_CFG_TWO_CODCH_SWITCH None - CS_AMRC_SWITCH:OFF, CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_SWITCH:ON, CS_IUUP_V2_SUPPORT_SWITCH:OFF, CS_ZERO_C_AMR_CFG_TWO_CODCH_SWITCH:OFF
DCH,HSPA None - DCH
-100~100 ms - 5
-100~100 ms - 5
EDCH_TTI_10ms, EDCH_TTI_2ms None - EDCH_TTI_10ms
OFF, ON None OFF OFF
0~16777215 None
- None
2, 4, 6, 8, 12, 16, 24 bit
BIT4(ADD
SCCPCHBASIC)
BIT2(ADD
PRACHBASIC)
BIT4(ADD
SCCPCHBASIC)
BIT2(ADD
PRACHBASIC)
0.01~0.1, step:0.01 per cent - 5
0~1, step:0.01 per cent - 50
0, 2, 4, 8, 10 None - None
ON,OFF None - ON
VPLCX, VCLCX None - None
0~4799 None - None
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D64
250, 500, 1000, 2000, 4000, 8000, 16000 ms - D1000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D5000
1~255 s - 30
0~255 None - 30
RATE_UP_AND_DOWN_ON_DCH, RATE_UP_ONLY_ON_DCH None - RATE_UP_AND_DOWN_ON_DCH
1~65535 s - 30
10~10000, step: 10 ms - 100
0~1023 None 16 16
0~1023 None 2 2
1 to 126,128 to 223 None - None
0~3,255 None - 255
-35~-10 dB - -22
-30~30 dB -13 -13
0~3600 s - 0
4 to 100(AEUa),4 to 255(AOUa) ms - 25(AEUa),200(AOUa)
1~5 None
- None
0~100 per cent - 7
-4~-2,step:2 None
- None
0~118 None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
1 to 100 None - None
1 to 100 None - None
1 to 60 min 1 1
UPLINK, DOWNLINK None - None
MAY, MUST, MUST_NOT None - MAY
0~1, step: 0.01 None - 50
10~60000, step: 10 ms
64(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
64
0~1, step: 0.01 None - 10
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
-
D6(SET LDM)
D3(SET SATLDM)
8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D128
8, 16 kbit/s
-(SET
FRCCHLTYPEP
ARA)
D8(ADD
CELLFRC)
D8
8,16,32,64,128,144,256,384 kbit/s - D64
8, 16, 32, 64, 128, 144, 256, 384, 768, 1024, 1536, 1800, 2048, 3600, 7200, 10100, 13900 kbit/s - D64
10~60000, step: 10 ms
64(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
64
10~60000, step: 10 ms
64(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
64
1~32 None
- 5
0~1, step:0.01 None 0 0
0~1, step:0.01 None 90 90
SF/2, HIGHER_LAYER_SCHDL None SF/2 SF/2
0~255 None - None
0~1, step:0.01 None 80 80
0~1, step:0.01 None 80 80
1~10 None
3 3
1~10 None
3 3
8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D64
8, 16, 32, 64, 128, 144, 256, 384 kbit/s
D64(ADD
CELLDCCC)
-(SET DCCC)
D64
0, 8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D64
SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF None SF32 SF32
0~1, step:0.01 None 85 85
0~1, step:0.01 None 0 0
0~1, step: 0.01 None - 10
0~400000 bit/s 200000 200000
0~1, step:0.01 per cent 20 20
1~10 None 1 1
1~32 None
- 5
1~10 None
1 1
SF4,SF8,SF16,SF32,SF64,SF128,SF256 None
SF8 SF8
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
CodeAdj(ADD
CELLLDR)
BE traff rate
reduction(ADD
NODEBLDR)
CodeAdj(ADD
CELLLDR)
BE traff rate
reduction(ADD
NODEBLDR)
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None no action no action
1~10 None
1 1
0~1, step:0.01 per cent 60 60
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
inter-freq load
handover(ADD
CELLLDR)
no action(ADD
NODEBLDR)
inter-freq load
handover(ADD CELLLDR)
no action(ADD
NODEBLDR)
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
BE traff rate
reduction(ADD
CELLLDR)
no action(ADD
NODEBLDR)
BE traff rate
reduction(ADD CELLLDR)
no action(ADD
NODEBLDR)
0~1, step:0.01 per cent 70 70
10~600000 ms 1000 1000
16, 32, 48, 64, 96, 128, 256, 512, 1024 None D64 D64
0~1, step:0.01 None 0 0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19 None
D1(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D1
0, 1 None - HAND_APPOINT
16, 32, 64, 128, 144, 256, 384kbit/s - D128
1~4294967295 ms
- 3000
0~1, step: 0.01 None - 100
1~32 None
- 5
1~10 None 3 3
0~100 None 3 3
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
- D1
0~1, step:0.01 per cent 85 85
0~10 None 0 0
10~60000, step:10 None
- 100
0~1, step:0.01 per cent 95 95
0~1, step:0.01 None 75 75
SF4,SF8,SF16,SF32,SF64,SF128,SF256 None - None
1~10 None
1 1
1~10 None
1 1
NO, YES None - NO
NO, YES None - NO
NO, YES None - NO
0~512 s
20(ADD
CELLQOSHO)
-(SET QOSHO)
20
NO, YES None - NO
NO, YES None - NO
NO, YES None - NO
NO, YES None - NO
OFF,ON None - OFF
2_Rates, 3_Rates None - 3_Rates
2_Rates, 3_Rates None - 3_Rates
-15~15 dB
5(ADD
CELLQOSHO)
-(SET QOSHO)
5
SF4, SF8, SF16, SF32, SF64, SF128, SF256, SF512 None - None
FALSE,TRUE None - FALSE
8,16,32,64,128,256 None
D64(ADD
CELLCMCF)
-(SET CMCF)
D64
0~1, step: 0.01 None - 10
0~1, step: 0.01 None - 100
8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D64
0~55.9, step: 0.1 dB
- 50
0~55.9, step: 0.1 dB
- 50
0.1~56, step: 0.1 dB
- 120
0.1~56, step: 0.1 dB
- 120
1~200 None 80 80
10~60000, step: 10 ms
64(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
64
3~505 cell/s - None
PsBlk, CsAndPsBlk None - None
CLOSE,OPEN None OPEN OPEN
1~16777215 None - None
1,2,5 None - None
1,2,5 None - None
SLOT_FORMAT_1, SLOT_FORMAT_4 None - None
1~11 characters None - None
None, STTD, CP1 None
None None
None, STTD, CP1 None
None None
SINGLE_TPC, TPC_TRIPLET_IN_SOFT, TPC_AUTO_ADJUST None - SINGLE_TPC
IUCS, IUPS, IUR, IUCS_RANAP, IUCS_ALCAP, AAL2SWITCH, STP None - None
1024 to 3584 None - None
8 to 19 None - None
0~118 None
- None
SINK, SOURCE, BOTH None BOTH BOTH
DRA_AQM_SWITCH, DRA_BE_EDCH_TTI_RECFG_SWITCH, DRA_BE_RATE_DOWN_BF_HO_SWITCH, DRA_DCCC_SWITCH, DRA_HSDPA_DL_FLOW_CONTROL_SWITCH, DRA_HSDPA_STATE_TRANS_SWITCH, DRA_HSUPA_DCCC_SWITCH, DRA_HSUPA_STATE_TRANS_SWITCH, DRA_IU_QOS_RENEG_SWITCH, DRA_PS_BE_STATE_TRANS_SWITCH, DRA_PS_NON_BE_STATE_TRANS_SWITCH, DRA_R99_DL_FLOW_CONTROL_SWITCH, DRA_THROUGHPUT_DCCC_SWITCH None - DRA_AQM_SWITCH:OFF, DRA_BE_EDCH_TTI_RECFG_SWITCH:ON, DRA_BE_RATE_DOWN_BF_HO_SWITCH:OFF, DRA_DCCC_SWITCH:ON, DRA_HSDPA_DL_FLOW_CONTROL_SWITCH:OFF, DRA_HSDPA_STATE_TRANS_SWITCH:OFF, DRA_HSUPA_DCCC_SWITCH:ON, DRA_HSUPA_STATE_TRANS_SWITCH:OFF, DRA_IU_QOS_RENEG_SWITCH:OFF, DRA_PS_BE_STATE_TRANS_SWITCH:ON, DRA_PS_NON_BE_STATE_TRANS_SWITCH:OFF, DRA_R99_DL_FLOW_CONTROL_SWITCH:OFF, DRA_THROUGHPUT_DCCC_SWITCH:OFF
-24~0 dB
-18 -18
1~10000 ms - 5000
1~10000 ms - 5000
0~5 None
-(SET DRD)
2(ADD
CELLDRD)
2
NO, YES None - NO
10 to 150 ms 60 IP:60; ATM:45
10 to 150 ms 60 IP:60; ATM:45
10 to 150 ms 60 IP:60; ATM:45
10 to 150 ms 60 IP:60; ATM:80
10 to 150 ms 80 80
10 to 150 ms 80 80
DR_RRC_DRD_SWITCH,DR_RAB_SING_DRD_SWITCH,DR_RAB_COMB_DRD_SWITCH None - DR_RRC_DRD_SWITCH:ON,DR_RAB_SING_DRD_SWITCH:ON,DR_RAB_COMB_DRD_SWITCH:OFF
4,5,8,10,16,20 None - None
3~9 None - 6
6~9 None 6 6
FALSE,TRUE None - None
OFF,ON None - None
0 to 31 None
- None
OFF,ON None - ON
0 to 63 None
0(PING IP)
-(SET
PHBMAP,SET
DSCPMAP)
62(ADD
SCTPLNK)
0(PING IP)
None(SET PHBMAP,SET
DSCPMAP)
62(ADD SCTPLNK)
0 to 21 None - None
YES, NO None - None
0 to 31 None - None
0.0.0.0~255.255.255.255 None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 None - None
1,4,5,8,10,16,20 None - None
4,5,8,10,16,20,32,40,64,80,128,160 None - None
0, 1, 2, 4, 8, 16, 32, 64, 128 frame - None
2,4,15 slot - None
OFF,ON None - None
Half(Half duplex), Full(Full duplex) None - Full
1~3600 s - 20
60~3600 s - 180
OFF, ON None - OFF
OFF, ON_1, ON_2, ON_3 None - None
FORCESHUTDOWN, CONDITIONALSHUTDOWN None CONDITIONALSHUTDOWN CONDITIONALSHUTDOWN
0 to 31 None - None
10~100000 Step: 10ms ms - 30
0~1023 None - 4
0~384 kbit/s - 8
0~1023 None - 2
1~8 None 1 1
0.0.0.0~255.255.255.255 None - None
0~5, step: 0.001 dB - 500
10~10000, step: 10 ms - 100
0~65535 ms
-(SET FRC)
30000(ADD
CELLFRC)
30000
0~5, step: 0.001 dB - 3000
0~5, step: 0.001 dB - 5000
-24.5~0 dB
-(SET FRC)
41(ADD
CELLFRC)
41
1 to 31 None - None
1~5000 bit 336 336
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 None D1 D1
0~1023 None 16 16
0~1023 None 16 16
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740 None -
RATE_8KBPS: not
selected
RATE_16KBPS: not
selected
RATE_32KBPS: not
selected
RATE_64KBPS: not
selected
RATE_128KBPS: selected
RATE_144KBPS: not
selected
RATE_256KBPS: selected
RATE_384KBPS: not
selected
RATE_608KBPS: selected
RATE_1440KBPS: not
selected
RATE_2048KBPS: not
selected
RATE_2880KBPS: not
selected
RATE_5740KBPS: not
selected
0~5, step: 0.001 dB - None
0~15, step:0.001 None - None
0~15, step:0.001 None - None
0~1023 None 2 2
0~1023 None 2 2
EDCH_10MS,EDCH_2MS None - None
0~100 per cent 20 20
-35~15,step:0.1 dB 10 10
FALSE,TRUE None - None
OFF, ON None - None
FALSE,TRUE None - FALSE
DATE, WEEK, DATEWEEKNone - None
OFF, ON None - ON
OFF, ON None OFF OFF
OFF, ON None - OFF
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC None - OCT
0.0.0.0~255.255.255.255 None - None
For each switch of this parameter, the value can be: ON or OFF. None - UEA0-1; UEA1-1
00:00~23:59 min - None
00:00~23:59 min - None
00:00~23:59 min - None
M3UA_SGP, M3UA_IPSP, M3UA_SS7SP, M3UA_SP None
- None
1 to 1000 None 1 1
1 to 60 s 1 1
1 to 1000 None 1 1
1 to 4294967295 None 204800 204800
1 to 900 s 1 1
10 to 900 s 60 60
1~8 None 1 1
5000~30000 ms - 5000
5000~30000 ms - 7000
HOUR, MIN, SEC None - 03&00&00
16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K byte D1024 D1024
8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K byte - None
0~100, step: 10 ms 50 50
0~100, step: 0.1 per cent 160 160
0~100, step: 0.1 per cent 80 80
SUN, MON, TUE, WED, THU, FRI, SAT None - SUN
FIRST, SECOND, THIRD, FOURTH, LAST None - LAST
1~9 character None 0.02 0.02
1~9 character None 0.004 0.004
VOLTAGE,CURRENT None Current Current
1~9 character None 100 100
1~9 character None 0 0
1~9 character None 0.02 0.02
1~9 character None 0.004 0.004
VOLTAGE,CURRENT None Current Current
1~9 character None 100 100
1~9 character None 0 0
1~9 character None 0.02 0.02
1~9 character None 0.004 0.004
VOLTAGE,CURRENT None Current Current
1~9 character None 100 100
1~9 character None 0 0
1~9 character None 0.02 0.02
1~9 character None 0.004 0.004
VOLTAGE,CURRENT None Current Current
1~9 character None 100 100
1~9 character None 0 0
250, 500, 1000, 2000, 4000, 8000, 16000 ms - D16000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D5000
1~32 None - None
1~32 None - None
-35~15, step: 0.1 dB
10(ADD
CELLMBMSFAC
H)
-(SET
MSCHFACH,SE
T MBMSFACH)
10(ADD
CELLMBMSFACH)
None(SET MBMSFACH)
-30(SET MSCHFACH)
REQUIRE,NOT_REQUIRE None REQUIRE REQUIRE
0~3,step:0.1 dB 0 0
0~100 per cent - None
0%~100% per cent - None
1~255 None - 4
ENABLE, DISABLE None - It must be consistent with the peer device
0 to 1999 None
1(ADD
ATMLOGICPOR
T,ADD
UNILNK,ADD
IMAGRP,ADD
FRALNK)
-(ADD
PORTFLOWCTR
LPARA,SET
ETHPORT,SET
OPT)
0(ADD
IPLOGICPORT,
ADD
PPPLNK,ADD
MPGRP)
1(ADD
ATMLOGICPORT,ADD
UNILNK,SET OPT,ADD
IMAGRP,ADD FRALNK)
None(ADD
PORTFLOWCTRLPARA,
SET ETHPORT)
0(ADD
IPLOGICPORT,ADD
PPPLNK,ADD MPGRP)
None(No CRC check), 16bit(16bit CRC check), 32bit(32bit CRC check) None
16bit 16bit
0.5, 1, 1.5, 2 dB - STEPSIZE_1DB
None, STTD None
None None
None, STTD None
None None
-35~15, step:0.1 dB - -30
-35~15, step:0.1 dB - -200
0~6, step: 0.25 dB - 12
0.0.0.0~255.255.255.255 None - None
0 to 128 characters None
-
CFGMML-RNCX-
YYYYMMDDHHMMSS.t
xt(EXP CFGMML)
None(BKP DB)
0 to 128 characters None - None
0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 None - D3
0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 None
D3(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D3
4, 6, 8, 12, 16, 24, 32 None D32 D32
OFF, ON None ON ON
OFF, ON None
ON(ADD
ATMLOGICPOR
T,ADD
UNILNK,ADD
MPGRP,ADD
IPLOGICPORT,
ADD
IMAGRP,ADD
PPPLNK,ADD
FRALNK)
-(SET
ETHPORT,SET
OPT)
ON
0~299 None - None
0 to 100 characters None - None
1~128 characters None - None
OFF, ON None - OFF
NO, YES None NO NO
1~10 ms 2 2
128 to 1024 byte 256 256
0 to 31 None - None
FRAATM, FRAIMA None - None
D32,D64,D128,D256 None D128 D128
0~33 None - None
1~33 None - None
PDCP,AMRC,TFOTRFO,INDIRECRETRY,INTERRATDIRECRETRY,INTERRATREDIRECT,CBS,CELLID,OTDOA,AGPS,PUC,INTRACELLLDB,INTERCELLLDB,MULTIRAB,HCS,RABDOWNSIZING,QCPE,INTERSERVICEHO,INTERLOADHO,IUQOSRENEG,LCSCZ,HSDPA,IUFLEX,IUBSC,IUBIP,MBMS None - None
WBAMR,HSUPA,RANSHARE,HSDPA3.6M,HSDPA7.2M,ROHC,IURLC,NACC,PSHBUG,IMSIBH,32HSDPAUPERCELL,64HSDPAUPERCELL,STMTRAONHSDPA,HSDPASTATETRAN,HSDPADRD,ENHANCEDIUFLEX,STMTRAONHSUPA,ATMIPDUALSTACK,IPTRANINIUR,IPTRANINIU,FRACTIONALIP,IPIUBOVERBOOKING,FRACTIONALATM,ATMOVERBOOKING,IUBHYBRIDIPTRAN,MBMS8CHANNELPERCELL,256KBPSCHNLRATEONMBMS,MBMSFLCFLD,VTFTSFIHO,CBIHBUMTSANDGSMGPRS,SRNSRELOCATION,SRNSRWHHANDOVER None - None
SRNSRWCUPDATE,LOSSLESSSRNSRELCT,INTERFREQHARDHNDV,IMPRVEDWNLNKCVRGE,ACRWHENSPUOVER,CBWHENIUIFAULT,3G2GCOMMON_LOAD,FP_MUX,HSDPA_OVER_IUR,HS_DPCCH_PREAMBLE_SUPPORT,HSUPA_5_74MBPS,HSUPA_OVER_IUR,HUB_IUB_OVERBOOKING,IMS_SIGNALING_OVER_HSPA,DYN_BANDWIDTH_CTROL_IUB_IP,MBMS_OVER_IUR,MBMS_P2P_OVER_HSDPA,MBMS_ENHANCED_BROADCAST,MBMS_ADMISSION_ENHANCE,RAN_SHARING_ENHANCED_PACKAGE,SRB_OVER_HSDPA,SRB_OVER_HSUPA,MULTI_FBNM,HSDPA_13_976MBPS,BFD_ARP_IP_REROUTE,INTER_FHHBDLQOS,INTER_RHBDLQOS,MBMS_16_CHANNELS_PER_CELL,60_HSUPA_USERS_PER_CELL,TPMT,AQM None - None
DYNAMIC_POWER_ESTIMATION_FOR_MTCH,ONE_TUNNEL,MULCAR_SWOFF_BASEDON_TRALOAD,CS_OVER_HSPA,VOIP_OVER_HSPA,96_HSDPA_USERS_PER_CELL,HSPA_DOWN28_PER_USER,HSPA_DOWN21_PER_USER,96_HSUPA_USERS_PER_CELL,MSCH_SCHEDULING,MBMS_CHANNEL,ENHANCED_CELL_FACH,CPC_HS_SCCH,CPC_DTX_DRX,UPLINK_MACRO_RECEIVE,DOMAIN_ACCESS_CONTROL,SERVICE_IN_RRC,TCP_ACCELERATOR,UPLINK_CONTROL_OF_USER,MOCN_PACKAGE,IUCS_UDP_MUX,RNC_NODE_REDUNDANCY,DOWNLNK_ENHANCED_L2,DIFF_SERVICE_ON_SPI_WEIGHT,HSUPA_ADAPTIVE_RETRANSMISSION None - None
0 to 1000000 kbit/s
0 0
AOUa/AEUa: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000 kbit/s 0 0
0~320000 kbit/s 0 0
0~3000000 kbit/s 0 0
0~4000000 kbit/s 0 0
0 to 1000000 kbit/s
0 0
0~200000 kbit/s 0 0
AOUa/AEUa: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000 kbit/s 0 0
0~320000 kbit/s 0 0
0~3000000 kbit/s 0 0
0~4000000 kbit/s 0 0
0 to 1000000 kbit/s
0 0
AOUa/AEUa: 0~64000; UOIa (directly carried on the leaf ATM Logical Port of the optical port): 0~149000; other boards: 0~64000 kbit/s 0 0
0~320000 kbit/s 0 0
0~3000000 kbit/s 0 0
0~4000000 kbit/s 0 0
1~15 None - None
0~15 None 15 15
0.0.0.0~255.255.255.255 None - None
0~1 None - None
DEG, SEC None DEG DEG
0~100 per cent 70 70
0~100 per cent 70 70
6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85 kbit/s

WBAMR_BITRA
TE_23.85K(ADD
CELLAMRCWB)
-(SET
AMRCWB)
WBAMR_BITRATE_23.8
5K
4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20 kbit/s

NBAMR_BITRA
TE_12.20K(ADD
CELLAMRC)
-(SET AMRC)
NBAMR_BITRATE_12.20
K
OFF, ON None OFF OFF
1 to 60 min 10 10
0~119 None - None
ATM, IP None - None
0~65535 None
- None
1~31 characters None - None
1~512 None - 512
0~5000 kbit/s - 0
Mode0,Mode1 None Mode0 Mode0
2, 10, 20, 50, 100, 200, 500, 1000 ms D50 D50
1000~600000 ms 5000 5000
UNI, IMA, FRAATM, NCOPT None - None
0~300 s 5 5
0~7 None
0 0
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF13;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF13.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF13.
0~100 None 30 30
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF13.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 100 100
0~100 per cent 70 70
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 None 30 30
0~100 None 100 100
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF23;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF23.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF23.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF23.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF23;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF23.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF23.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF23.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF23;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF23.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF23.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF23.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 30 30
0~100 None 100 100
0~100 None 30 30
0~100 None 100 100
0~100 per cent 15 15
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 50 50
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 70 70
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0 to 31 None - None
DL_DCCH_SWITCH, IUR_TRG_SWITCH None - None
OFF,ON None - None
0 to 83 None - None
1~10000 ms - 5000
1~10000 ms - 5000
0~3 None 2 2
1~10000 ms - 5000
1~10000 ms - 5000
1~10000 ms - 5000
SingleHost, PrimHost, SecHost None SingleHost SingleHost
HO_ALGO_HCS_SPEED_EST_SWITCH, HO_ALGO_LDR_ALLOW_SHO_SWITCH, HO_ALGO_MBMS_FLC_SWITCH, HO_ALGO_OVERLAY_SWITCH, HO_INTER_FREQ_HARD_HO_SWITCH, HO_INTER_FREQ_RPRT_2D2F_SWITCH, HO_INTER_RAT_CS_OUT_SWITCH, HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_SWITCH, HO_INTER_RAT_PS_3G2G_RELOCATION_SWITCH, HO_INTER_RAT_PS_OUT_SWITCH, HO_INTER_RAT_RNC_SERVICE_HO_SWITCH, HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWITCH, HO_INTRA_FREQ_DETSET_RPRT_SWITCH, HO_INTRA_FREQ_HARD_HO_SWITCH, HO_INTRA_FREQ_RPRT_1J_SWITCH, HO_INTRA_FREQ_RPRT_6F6G_SWITCH, HO_INTRA_FREQ_SOFT_HO_SWITCH, HO_MC_MEAS_BEYOND_UE_CAP_SWITCH, HO_MC_NCELL_COMBINE_SWITCH, HO_MC_SIGNAL_IUR_INTRA_SWITCH, HO_MC_SIGNAL_SWITCH, HO_MC_SNA_RESTRICTION_SWITCH None - HO_ALGO_HCS_SPEED_EST_SWITCH:OFF, HO_ALGO_LDR_ALLOW_SHO_SWITCH:ON, HO_ALGO_MBMS_FLC_SWITCH:OFF, HO_ALGO_OVERLAY_SWITCH:OFF, HO_INTER_FREQ_HARD_HO_SWITCH:OFF, HO_INTER_FREQ_RPRT_2D2F_SWITCH:ON, HO_INTER_RAT_CS_OUT_SWITCH:ON, HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_SWITCH:OFF, HO_INTER_RAT_PS_3G2G_RELOCATION_SWITCH:OFF, HO_INTER_RAT_PS_OUT_SWITCH:ON, HO_INTER_RAT_RNC_SERVICE_HO_SWITCH:OFF, HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWITCH:ON, HO_INTRA_FREQ_DETSET_RPRT_SWITCH:ON, HO_INTRA_FREQ_HARD_HO_SWITCH:ON, HO_INTRA_FREQ_RPRT_1J_SWITCH:OFF, HO_INTRA_FREQ_RPRT_6F6G_SWITCH:OFF, HO_INTRA_FREQ_SOFT_HO_SWITCH:ON, HO_MC_MEAS_BEYOND_UE_CAP_SWITCH:OFF, HO_MC_NCELL_COMBINE_SWITCH:ON, HO_MC_SIGNAL_IUR_INTRA_SWITCH:OFF, HO_MC_SIGNAL_SWITCH:OFF, HO_MC_SNA_RESTRICTION_SWITCH:OFF
-24~0 dB -16 -16
-115~-25 dB -92 -92
1~10000 ms - 5000
0 to 3 None - None
0~1, step: 0.01 None - 100
0~1, step:0.01 per cent 30 30
FALSE,TRUE None - TRUE
0~1, step: 0.01 None - 50
0~1, step: 0.01 None - 100
1~32 None
- 5
1~32 None
- 5
0~65534 None - 100
0~100 None - 90
0~1, step: 0.01 None - 100
0~1, step:0.01 per cent 70 70
0 to 3910000 kbit/s - None
0~5 None 0 0
1~5000 bit 336 336
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1~5000 bit - None
1, 2, 3, 4, 5, 6, 7, 8 None D1 D1
14 to 27 None - None
E_F_DPCH_OFF,E_F_DPCH_ON None E_F_DPCH_OFF E_F_DPCH_OFF
MIMO,64QAM None - MIMO
64QAM,MIMO,E_FACH,DTX_DRX,HS_SCCH_LESS_OPERATION,L2ENHANCED None - None
-50~0, step:0.1 dB 0 0
0~1024 s - 0
FALSE, TRUE None - None
FALSE, TRUE None - None
FALSE, TRUE None - None
FALSE, TRUE None - None
1~15 None 5 5
1~15 None 5 5
1~15 None 1 1
-3~19, step:0.5 dB 2.5dB 2.5dB
None, STTD, CP1 None
None None
0 to 5 None - None
1~15 None 4 4
10, 20, 50, 100, 200, 500, 1000 ms - D100
10, 20, 50, 100, 200, 500, 1000 ms - D50
2,10, 20, 50, 100, 200, 500, 1000 ms - D100
2,10, 20, 50, 100, 200, 500, 1000 ms - D50
0~1, step: 0.01 None - 100
8, 16, 32, 64, 128, 144, 256, 384, 608, 1450, 2048, 2890, 5760 kbit/s - D5760
MBR, GBR None MBR MBR
For each switch of this parameter, the value can be ON, OFF. None - BasedOnUECap
0~1, step: 0.01 None - 50
RATE_UP_AND_DOWN_ON_EDCH, RATE_UP_ONLY_ON_EDCH None - RATE_UP_AND_DOWN_ON_EDCH
0~1, step:0.01 per cent 100 100
0~1, step:0.01 per cent 100 100
8,16,32,64,128,144,256,384,608,1440,2048,2880,5740 kbit/s - D256
0~1, step: 0.01 None - 100
0~1, step:0.01 per cent 100 100
1~32 None - 5
0~65534 None - 100
0~100 None - 90
0~1, step: 0.01 None - 100
0 to 3910000 kbit/s - None
0~1, step:0.01 per cent 50 50
0~1, step:0.01 per cent 70 70
0~5 None 0 0
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF13;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF13.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF13.
0~100 None 30 30
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF13.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 100 100
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 70 70
0~100 None 30 30
0~100 None 100 100
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF23;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF23.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF23.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF23.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF23;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF23.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF23.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF23.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM, the parameter is
UBR; transimssion type is
dual stack or IP, the
parameter is AF23;
transimssion type is dual
stack or Hybird IP, the
parameter is LQAF23.
When the interface type is
Iur, transmission type is
ATM, the parameter is
UBR; transimssion type is
IP, the parameter is AF23.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
UBR; transimssion type is
Hybird IP, the parameter is
AF23.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 30 30
0~100 None 100 100
CLOSE,OPEN None OPEN OPEN
1~9 character per cent 80 80
1~9 character per cent 10 10
0~100 None 30 30
0~100 None 100 100
0 to 167 None - None
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 15 15
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 50 50
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 per cent 70 70
32 to 65535 None - None
0 to 255 None - None
0~7.5,Step:0.5 dB
0(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0
0~7.5,Step:0.5 dB
0(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0
0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
8
0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
8
0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
8
0~7.5,Step:0.5 dB
8(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
8
0~14.5,Step:0.5 dB/ dBm
4(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
4
0~14.5,Step:0.5 dB
6(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
6
0~14.5,Step:0.5 dB/ dBm
4(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
4
0~14.5,Step:0.5 dB/ dBm
4(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
4
0~7.5,Step:0.5 dB
4(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
4
0~7.5,Step:0.5 dB
0(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
0
0~7.5,Step:0.5 dB
0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0
0~14.5,Step:0.5 dB/ dBm
0(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0
180~1260 s - 720
60~600 s - 90
44~1024 byte 64 64
1~30,100~32767 None - None
BARRED, NOT_BARRED None - None
ALLOWED, NOT_ALLOWED None ALLOWED ALLOWED
0~40, step:2 dB 2 2
{0~40},{255}, step:2 dB - 2
-50~50 dB
0 0
-50~50 dB
0 0
{-32~20},{127}, step:2 dB 127 127
{-32~20},{127}, step:2 dB 127 127
10, 20, 40, 80, 160, 320, 640, 1280 s D320 D320
UNI: 10000~30000
NNI: 100~30000 ms -
UNI: 15000
NNI: 500
0~120 s - 30
5000~30000 ms - 20000
0 to 31(AEUa),0 to 83(AOUa) None
- None
0 to 255 None - None
0 to 167 None
- None
V1.0, V1.1 None V1.1 IMA protocol Version 1.1
OFF, ON None - OFF
DCH, HSDPA, HSPA None - DCH
1~1000 kbit/s 32 32
15-bit decimal numerals None - None
15-bit decimal numerals None - None
15-bit decimal numerals None - None
32, 64 kbit/s - D32
0~999 None - None
0~999 None - None
1~2000 kbit/s 512 512
1,4,8,16,32,64,128,256 None - None
0,1,2,4,8,16,32,64,128,256,512 None - None
0,1,2,4,8,16,32,64,128,256 None - None
CLOSE,OPEN None OPEN OPEN
LOGIC(Logic inhibit), PHYSICAL(Physical inhibit) None - None
1200~2000 ms 1500 1500
For each switch of this parameter, the value can be: ON or OFF. None - UIA1-1
1~1000 kbit/s 32 32
1~2000 kbit/s 512 512
CSAMR_INTERFREQ,CSNONAMR_INTERFREQ,PSR99_INTERFREQ,PSHSPA_INTERFREQ None - CSAMR_INTERFREQ:OFF, CSNONAMR_INTERFREQ:OFF, PSR99_INTERFREQ:OFF, PSHSPA_INTERFREQ:OFF
-24~0 dB -16 -16
-24~0 dB
-14(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-14
-115~-25 dBm
-95(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-95
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-92
0~100 None 80 80
0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 None
D3(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
NCOV,SET
INTERFREQHO
COV)
For low
speed(5km/h):Range is
D4~D6, the recommended
value is D5;
for middle
speed(50km/h):Range is
D3~D4, the recommended
value is D4;
for high
speed(120km/h):Range is
D2~D4, the recommended
value is D2;
universal value:Range is
D3~D6, the recommended
value is D3.(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
D3(ADD
CELLMBDRINTERFREQ,
SET
INTERFREQHONCOV,A
DD
CELLINTERFREQHONC
INTER_FREQ_COV,INTER_FREQ_COV_NCOV,INTER_FREQ_TA None INTER_FREQ_COV INTER_FREQ_COV
-24~0 dB
-14(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-14
-115~-25 dBm
-95(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-95
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-92
NOT_REQUIRE,INTER_FREQ,INTER_RAT,INTER_FREQ_AND_INTER_RAT None INTER_FREQ_AND_INTER_RAT INTER_FREQ_AND_INTER_RAT
CPICH_EC/NO,CPICH_RSCP,BOTH None CPICH_EC/NO CPICH_EC/NO
0~512 s
60(ADD
CELLINTERFRE
QHONCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
NCOV,SET
INTERFREQHO
COV)
3(ADD
CELLMBDRINT
ERFREQ)
60(SET
INTERFREQHONCOV,A
DD
CELLINTERFREQHONC
OV,SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
3(ADD
CELLMBDRINTERFREQ)
OFF,ON None - OFF
-24~0 dB - -16
-24~0 dB
-14(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-14
-115~-25 dBm
-95(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-95
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-92
INTERFREQ,INTERRAT,SIMINTERFREQRAT None SIMINTERFREQRAT SIMINTERFREQRAT
PERIODICAL_REPORTING,EVENT_TRIGGER None

PERIODICAL_R
EPORTING(AD
D
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)

EVENT_TRIGGE
R(ADD
CELLMBDRINT
ERFREQ)

PERIODICAL_REPORTI
NG(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
EVENT_TRIGGER(ADD
CELLMBDRINTERFREQ)
{1~4.75},{255}, step:0.25 None 255 255
0~100 None 80 80
NO,YES None - NO
NO,YES None - NO
CSAMR_INTERRAT None - CSAMR_INTERRAT:OFF
-24~0 dB
-14(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-14
-115~-25 dBm
-100(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-100
-24~0 dB
-12(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-12
-115~-25 dBm
-97(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-97
0~100 None 80 80
0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 None
D3(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
D3
1~16 None
16(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
16
NO, YES None - YES
lower than -110, -110~-48(1:-110; 2:-109; ...; 63:-48 ) dBm 21 21
DRD, MEAS_BASED None - DRD
-24~0 dB
-15(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-15
-115~-25 dBm
-110(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-110
-24~0 dB
-13(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-13
-115~-25 dBm
-107(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-107
0~512 s
60(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
3(ADD
CELLMBDRINT
ERRAT)
60(SET
INTERRATHONCOV,AD
D
CELLINTERRATHONCO
V,SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
3(ADD
CELLMBDRINTERRAT)
OFF,ON None - OFF
lower than -110, -110~-48(1:-110; 2:-109; ...; 63:-48 ) dBm
21(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
21
lower than -110, -110~-48(1:-110; 2:-109; ...; 63:-48 ) dBm
21(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
21
NON_PERIODIC_REPORT,250,500,1000,2000,3000,4000,6000,8000,12000,16000,20000,24000,28000,32000,64000 ms
D1000(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D1000
0~63 None
3(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
3
0~7.5,Step:0.5 dBm
0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0
0~65535 s
0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0
-24~0 dB
-15(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-15
-115~-25 dBm
-110(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-110
-24~0 dB
-13(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-13
-115~-25 dBm
-107(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
-107
PERIODICAL_REPORTING,EVENT_TRIGGER None

PERIODICAL_R
EPORTING(AD
D
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)

EVENT_TRIGGE
R(ADD
CELLMBDRINT
ERRAT)

PERIODICAL_REPORTI
NG(SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
EVENT_TRIGGER(ADD
CELLMBDRINTERRAT)
{1~4.75},{255}, step:0.25 None 255 255
0~100 None 80 80
1 to 10 s 1 1
-24~0 dB
-24(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
-24
-115~-25 dBm
-115(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
-115
0,1,2,3,4,5,6,7,8,9,11,13,15,17,19 None D3 D3
1~86400 s
- 1800
REQUIRE,NOT_REQUIRE None REQUIRE REQUIRE
CPICH_EC/NO, CPICH_RSCP None

CPICH_EC/NO(
ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
CPICH_EC/NO
OFF,ON None - OFF
0~14.5, step: 0.5 dB - 12
0~14.5,Step:0.5 dB
6(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
6
0~14.5,Step:0.5 dB
6(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
6
0~14.5,Step:0.5 dB
6(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
6
0~14.5, step: 0.5 dB - 18
0~14.5,Step:0.5 dB
12(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
12
0~14.5,Step:0.5 dB
12(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
12
0~14.5,Step:0.5 dB
12(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
12
15000~120000 ms - 60000
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
No_HC(Disable head compress),UDP/IP_HC(Use UDP/IP head compress) None UDP/IP_HC UDP/IP_HC
No_HC(Disable head compress),UDP/IP_HC(Use UDP/IP head compress) None UDP/IP_HC UDP/IP_HC
1 to 5 None
- None
NO(Not binding), YES(Binding). None - None
0 to 119 None - None
14 to 27 None - None
0 to 5 None - None
SUPPORT, NOT_SUPPORTNone - None
PRIMARY, SECOND None
- None
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
BARRED, NOT_BARRED None NOT_BARRED NOT_BARRED
NO,YES None NO NO
NO, YES None - None
FALSE, TRUE None FALSE FALSE
NO,YES None YES YES
NO,YES None - None
NO, YES None - None
IUB,IUR,IUCS,IUPS None
- None
1~3600 s - 1
0~10 None 1 1
0~10 None 1 1
1~65535 s - 300
1~65535 s - 300
OFF, ON None OFF OFF
TRUE, FALSE None - TRUE
OFF, ON None OFF OFF
OFF, ON None OFF OFF
0~16777215 None - None
NONE,IUCS,IUPS,IUCS_IUPS None IUCS_IUPS IUCS_IUPS
NULL, 1 byte, 16 byte, 64 byte None - 16 byte
None None - SBS 155
NULL, 1 byte, 16 byte, 64 byte None - 16 byte
None None - SBS 155
NULL,1byte,16byte,64byte None - 16 byte
None None - SBS 155
NULL, 1 byte, 16 byte, 64 byte None - 16 byte
None None - SBS 155
NULL, 16 byte, 64 byte None - None
1~15 characters None - None
NULL, 16 byte, 64 byte None - None
None None - None
NOT-INDICATE-END, INDICATE-END None - None
UNI: 1000~3000
NNI: 100~1200 ms -
UNI: 2000
NNI: 100
YES,NO None - None
D1,D2,D3,D4,D5,D6,D7,D8,D9,D10 None - D1
OFF, ON None - ON
{1~65533}, {65535} None
- None
-90000000 to 90000000 None - None
-90:00:00.000~90:00:00.000 None - None
100~10000 step:100 ms 2 2
0~100 None 4 4
0~10000 ms 25 25
0~15 None 3 3
0~15 None 8 8
UNI, IMA, FRAATM, NCOPT None - None
1~32 None
- 32
Power, UserNumber None
-(SET DRD)

UserNumber(AD
D CELLDRD)
UserNumber
0~100 per cent
-(SET DRD)
35(ADD
CELLDRD)
35
0~100 per cent
-(SET DRD)
100(ADD
CELLDRD)
100
0~100 per cent - 10
0~100 per cent - 10
ON, OFF None
-(SET DRD)
OFF(ADD
CELLDRD)
OFF
ON, OFF None
-(SET DRD)
OFF(ADD
CELLDRD)
OFF
0~100 per cent - 30
NODEB_CREDIT_LDR_SWITCH,LCG_CREDIT_LDR_SWITCH,LC_CREDIT_LDR_SWITCH None -
NODEB_CREDIT_LDR_S
WITCH:disabled.
LCG_CREDIT_LDR_SWI
TCH:disabled.
LC_CREDIT_LDR_SWIT
CH:disabled.
FALSE, TRUE None FALSE FALSE
0~1, step:0.01 per cent 13 13
IUBLDR,CODELDR,UULDR,CREDITLDR None - IUBLDR
IUBLDR,CODELDR,UULDR,CREDITLDR None - UULDR
1~86400 s
- 10
IUBLDR,CODELDR,UULDR,CREDITLDR None - CREDITLDR
IUBLDR,CODELDR,UULDR,CREDITLDR None - CODELDR
1~63 None - None
0~63 None - None
0~63 None - None
0~63 None - None
0~118 None
- None
ON,OFF None - ON
0 to 7 None 0 0
0 to 31 None - None
UCP,RUCP,UUP,ATM,IP None - None
UCP,RUCP,UUP,ATM,IP None - None
ATM,IP None - None
0 to 83 None - None
8,16,32,64,128,256 None - D8
0, 8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D64
0~9Characters None - None
B8ZS, HDB3, AMI, AMI_ZCS None - None
0 to 167 None
- None
M3UA_MASTER_MOD,
M3UA_SLAVE_MOD
(For definitions of the two
modes, refer to RFC4666.) None M3UA_MASTER_MOD M3UA_MASTER_MOD
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111 None
B1111 B1111
E1_DOUBLE_FRAME, E1_CRC4_MULTI_FRAME, T1_SUPER_FRAME, T1_EXTENDED_SUPER_FRAME None - E1_CRC4_MULTI_FRAME
SAALLNK, AAL2PATH, IPOAPVC None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0~268435455 None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
1024~65535 None - None
LFB,CL None - None
NO, YES None - None
0~119 None - None
14~27 None - None
-180000000 to 180000000 None - None
-180:00:00.000~180:00:00.000 None - None
NO_LOOP, REMOTE_LOOP, LOCAL_LOOP None
- None
0~100 None 1 1
0 to 3 None - None
0~119 None
- None
AEUa (0~191) 0~127 is
Leaf logical port,128~191
is Hub logical port.
AOUa (0~383) 0~255 is
Leaf logical port,256~383
is Hub logical port.
UOIa (0~447) 0~383 is
Leaf logical port,384~447
is Hub logical port.
None - None
14~27 None - None
Hub, Leaf None - None
ALL, SINGLE None - ALL
ALL, PORT, SINGLE None - ALL
14 to 27 None - None
0 to 5 None - None
0 to 167 None - None
32 to 65535 None - None
0 to 255 None - None
1024~65535 None - 2905
0~2 None - 1
1,4,5,8,10,16,20 None - None
1,2,4,8,16,32,64,128,256,512,INFINITY None - None
4~1504 byte - None
4~1504 byte - None
0 to 299 None
- None
SAAL, SCTP None
SAAL SAAL
1 to 20 characters None - None
MAP_HSUPA_TTI_2MS_SWITCH, MAP_INTER_RAT_PS_IN_CHANLE_LIMIT_SWITCH, MAP_PS_BE_ON_E_FACH_SWITCH, MAP_PS_STREAM_ON_E_FACH_SWITCH, MAP_PS_STREAM_ON_HSDPA_SWITCH, MAP_PS_STREAM_ON_HSUPA_SWITCH, MAP_SRB_6800_WHEN_RAB_ON_HSDSCH_SWITCH None - MAP_HSUPA_TTI_2MS_SWITCH:OFF, MAP_INTER_RAT_PS_IN_CHANLE_LIMIT_SWITCH:OFF, MAP_PS_BE_ON_E_FACH_SWITCH:OFF, MAP_PS_STREAM_ON_E_FACH_SWITCH:OFF, MAP_PS_STREAM_ON_HSDPA_SWITCH:OFF, MAP_PS_STREAM_ON_HSUPA_SWITCH:OFF, MAP_SRB_6800_WHEN_RAB_ON_HSDSCH_SWITCH:OFF
B1,B2, B3,B4, B5,B6, B7,B8, B9,B10, B11, B12, B13, B14, B15, B16, B17, B18, B19 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
-50~33 dBm
24(ADD
CELLSELRESEL
)
-(ADD
NRNCCELL)
24(ADD
CELLSELRESEL)
None(ADD NRNCCELL)
TRUE,FALSE None FALSE FALSE
1~100000 m - None
3~328080 m - None
0~254 None 10 When the application type is NBAP, the recommended value is 10; when the application type is M3UA, the recommended value is 4.
{0~3} None 1 1
{0~3} None 1 1
0~256000000 bit/s
- None
64~64000 step:64 kbit/s - None
0~255 None - 150
0~255 None - 100
4~8 None 4 4
1~6 None
3(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
3
0, 1,..., 15 None D15 D15
-24.5~0, step: 0.5 dB - 49
1~4 None - 3
0~15 None - None
0~48 None 48 48
-35~15, step: 0.1 dB 10 10
135~1031 byte 1031 1031
4~16 None - 16
0~100 None 64 64
0~100 None 20 20
2~255 None
- 3
1 to 1500 byte
256(ADD
PPPLNK)
-(ADD MPGRP)
256(ADD PPPLNK)
None(ADD MPGRP)
1~6 None 1 1
0~10 None 0 0
0~254 None 5 When the application type is NBAP, the recommended value is 5; when the application type is M3UA, the recommended value is 2.
-10~50, step: 0.1 dBm 346 346
UNI: 25~50
NNI: 250~500 None -
UNI: 25
NNI: 500
1~60 s - 5
1 to 1500 byte
64(ADD
PPPLNK)
-(ADD MPGRP)
64(ADD PPPLNK)
None(ADD MPGRP)
0~1, step:0.01 per cent 75 75
1 to 24 h 12 12
0~50, step: 0.1 dBm
430 430
-50~33 dBm 24 24
-50~33 dBm 24 24
-50~33 dBm 24 24
-50~33 dBm 24 24
1~3 None 1 1
FALSE,TRUE None
FALSE FALSE
0~15 None
0 0
0 to 31 None - None
0.0.0.0~255.255.255.255 None - None
14 to 27 None - None
0 to 5 None - None
0~1, step: 0.01 None - 100
0~100 per cent 100 100
COMMON, MCCH None COMMON COMMON
1~15 None 1 1
1~10 min - 2
OFF, ON None - OFF
000~999 None - None
000~999 None - None
FALSE,TRUE None TRUE TRUE
0~8 None 1 1
OFF, ON None - OFF
8, 16, 32, 64, 128, 144, 256 kbit/s - D16
0~65535 None
- None
0~16777215 None - None
OFF, ON None - ON
0 to 3910000 kbit/s - None
PTM, PTP, ENHANCEDPTM, DYNAMIC None
PTM(ADD
SAMBMSPARA,
ADD
CELLMBMSPA
RA)
-(SET
RNCMBMSPAR
A)
PTM
3 to 10000 byte - 1000
000~999 None
- None
0~3 None - 3
7~10 None - 7
0~3 None - 1
4(Use two bytes to present MC priority number, 4 classes),8(Use four bytes to present MC priority number, 8 classes) None - None
30 to 70754 None - None
0 to 7 None
- None
1 to 20 characters None - None
CPICH_EC/NO,CPICH_RSCP,AUTO None
AUTO(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
AUTO
1 to 300 None
- None
14 to 27 None - None
LocalMep,
RemoteMep None - None
LONG(Long sequence number which is used by MP/MC head),SHORT(Short sequence number which is used by MP/MC head) None LONG LONG
0~255 None - None
-10~5 dB -7 -7
FALSE, TRUE None FALSE FALSE
64~64000 step:64 kbit/s - None
0, 1,..., 15 None D14 D14
SF4, SF8, SF16, SF32, SF64 None SF8 SF8
-24.5~0, step: 0.5 dB - 21
1~60 min
- None
1~60 min
- None
1~60 min
- None
1~60 min
- None
1~60 min
- None
1~60 min
- None
1~60 min
- None
1~60 min - None
1~60 min
- None
1~60 min
- None
1~60 min
- None
1 to 32 None 1 1
-10~50, step: 0.1 dBm 313 313
10 to 1000 ms 100 100
10 to 1000 ms 100 100
SF4, SF8, SF16, SF32, SF64 None SF4 SF4
1~32 None 8 8
00~99,000~999 None
- None
COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH, COMM_MIB_MULTI_PLMN_LIST_ALLOWED_SWITCH, SPARE_1_SWITCH, SPARE_2_SWITCH, SPARE_3_SWITCH, SPARE_4_SWITCH, SPARE_5_SWITCH, SPARE_6_SWITCH None - COMM_MOCN_NRI_GLOBAL_CONFIG_MODE_SWITCH:ON, COMM_MIB_MULTI_PLMN_LIST_ALLOWED_SWITCH:ON
NO,YES None - NO
OFF,ON None - OFF
MODE1, MODE2, MODE3 None - None
MANUAL, AUTO None - AUTO
PRIMARY,STANDBY,INDEPENDENT None - None
SERVER, CLIENT None - None
5000~30000 ms - 10000
5000~30000 ms - 10000
40~60000 ms 1000 1000
1~65535 s - 60
0.0.0.0~255.255.255.255 None - None
0 to 63 None
- None
MPS_NORMAL, MPS_EMERGENCY, MPS_NEUTRAL None MPS_NEUTRAL MPS_NEUTRAL
MLPPP(MLPPP group),MCPPP(MCPPP group) None MCPPP MCPPP
0,2,4,8,10 None - None
12, 16, 20, 24, 28, 32, 64 s - D12
OFF,ON None - OFF
For each switch of this parameter, the value can be: ON or OFF. None - OFF
1, 2, 4, 8 None -
TRAFFIC_AMR: not
selected
TRAFFIC_VP: not selected
TRAFFIC_BE: not selected
TRAFFIC_OTHER: not
selected
OFF, ON None - OFF
OFF, ON None - OFF
1~100 characters None - None
OFF,ON None OFF OFF
CLEAR,LOP,FS,MS,EXERS, None - None
0~1, step:0.01 None 60 60
0~63 None 40 40
0~1, step: 0.01 per cent
80(ADD
CELLMBMSFAC
H)
-(SET
MBMSFACH)
80
0~1, step: 0.01 per cent
50(ADD
CELLMBMSFAC
H)
-(SET
MBMSFACH)
50
16, 32, 64, 128, 256 kbit/s - D16
TRUE, FALSE None - FALSE
0~1, step:0.01 None 20 20
0~63 None 16 16
0~1 None - None
MET, IMP None MET MET
256 to 1500 byte
-(SET
ETHPORT)
1500(ADD
SCTPLNK)
1500
1 to 1500 ls
1000(ADD
PPPLNK)
-(ADD MPGRP)
1000(ADD PPPLNK)
None(ADD MPGRP)
1~16 None - None
10~2000 None 100 100
0~7 None - 3
0~7 None - 3
0~7 None - 3
1~8 None - 1
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000 None
- D1
D1, D2, D4, D10, D20, D50, D100, D200 None - D50
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000 None - D1
D1,D2,D3,D4 None - D1
1~31 characters None
- None
0~50 frame 0 0
0~50 frame 0 0
1~200 None - 20
1024~65535 None - 58080
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
1~200 None - 20
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
1 to 30 characters None - None
1 to 30 characters None - None
CRD_ADCTRL,HSDPA_UU_ADCTRL,HSUPA_UU_ADCTRL,MBMS_UU_ADCTRL,HSDPA_GBP_MEAS,HSDPA_PBR_MEAS,DOFFC,HSUPA_PBR_MEAS,HSUPA_EDCH_RSEPS_MEAS,EMC_UU_ADCTRL,FACH_UU_ADCTRL None - None
ALGORITHM_OFF,ALGORITHM_FIRST,ALGORITHM_SECOND,ALGORITHM_THIRD None - None
INTRA_FREQUENCY_LDB,PUC,UL_UU_LDR,DL_UU_LDR,UL_UU_OLC,DL_UU_OLC,OLC_EVENTMEAS,CELL_CODE_LDR,CELL_CREDIT_LDR None - None
NBM_LDC_ALL_UE,
NBM_LDC_MATCH_UE_
ONLY,
NBM_LDC_MATCH_UE_
FIRST
None NBM_LDC_MATCH_UE_ONLY NBM_LDC_MATCH_UE_ONLY
ALGORITHM_REQUIRED,ALGORITHM_DEPEND_ON_LCG None ALGORITHM_DEPEND_ON_LCG ALGORITHM_DEPEND_ON_LCG
ALGORITHM_OFF,ALGORITHM_FIRST,ALGORITHM_SECOND,ALGORITHM_THIRD None - None
PRIORITY1, PRIORITY2, PRIORITY3, PRIORITY4, PRIORITY5, PRIORITY6, PRIORITY7, PRIORITY8, PRIORITY9, PRIORITY10, PRIORITY11, PRIORITY12, PRIORITY13, PRIORITY14, None - PRIORITY2&PRIORITY3&PRIORITY4&PRIORITY5&PRIORITY6
ALGORITHM_OFF, ALGORITHM_ON None - ALGORITHM_OFF
1~200 None - 60
ATMTRANS_IP, IPTRANS_IP, ATMANDIPTRANS_IP None - None
0~7 None - None
0~65535 None
- None
0~1, step:0.01 per cent 20 20
0~4095 None
- None
NC0,NC1,NC2,RESET None NC0 NC0
2~10 None
4(ADD
SAMBMSPARA,
ADD
CELLMBMSPA
RA)
-(SET
RNCMBMSPAR
A)
4
OFF, ON None - ON
1~16 None 8 8
NO, YES None DIRECT_CONNECT DIRECT_CONNECT
0.0.0.0 to 255.255.255.255 None - None
0.0.0.0~255.255.255.255 None
- None
1~16 None
15(ADD
CELLHCSHO)
-(SET HCSHO)
15
International Network Code, International Standby Network Code, National Network Code, National Standby Network Code None - None
1~256 None 5 5
MODE1,MODE2 None MODE2 MODE2
0~60 s - 3
0 None - None
0~3840 None 3840 3840
0~3840 None 3840 3840
0~65535 None
- None
0 to 3 None - None
IUB_LDR, NODEB_CREDIT_LDR, LCG_CREDIT_LDR, IUB_OLC None - None
1~64 characters None
- None
R99, R4, R5, R6, R7 None R7 R7
1 to 60 min 30 30
PERIOD,EVENT None PERIOD PERIOD
0 to 1,12 to 15,22 to 23 None - None
0 to 2 None - None
BASE_BOARD,CH_STM1,E1 None - None
NORMAL, PICO_TYPE1, PICO_TYPE2 None NORMAL NORMAL
5~1440, step:5 min - None
00:00:00~23:59:59 s - None
IUB, IUR, IUCS, IUPS, UNI_AAL2SWITCH, NNI_AAL2SWITCH None - None
PICO_TYPE1, PICO_TYPE2None - PICO_TYPE1
CONFIGURED, NOT_CONFIGURED None NOT_CONFIGURED NOT_CONFIGURED
0~1, step:0.01 per cent 0 0
1~256 None 50 50
0~63 None
- None
0~30 None - None
FALSE,TRUE None
FALSE FALSE
1~5 None
3(ADD
SAMBMSPARA,
ADD
CELLMBMSPA
RA)
-(SET
RNCMBMSPAR
A)
3
0~1023 None - None
0~4095 None
- None
ATM address None - None
None None
- None
1~16 None
3(ADD
CELLHCSHO)
-(SET HCSHO)
3
0~1023 None - None
1~16 None
-
2(SET
DSACAUTOALGO)
None(ADD
CELLDSACMANUALPA
RA)
0%~100% per cent
0(ADD
IPLOGICPORT,
ADD
MPGRP,ADD
PPPLNK)
-(SET
ETHPORT)
0(ADD
IPLOGICPORT,ADD
MPGRP,ADD PPPLNK)
None(SET ETHPORT)
0 to 63 None - None
OFF,ON None - None
-20~20 dB 4 4
-20~20 dB -4 -4
-20~20 dB 4 4
-20~20 dB -4 -4
-20~20,step:2 dB 2 2
-20~20, step:2 dB -2 -2
100~86400000 ms
- 3000
PRIM,SEC,OUTER,COMM None - None
TRCH_DCH, TRCH_HSDSCH None - None
MAP_MODE_LUCENT,MAP_MODE_HUAWEI,MAP_MODE_ALCATEL None - None
R5_PosData_SWITCH, Last_Known_Service_Area_SWITCH None - R5_PosData_SWITCH
SDH, SONET None - None
0~179 degree - None
One_touch (for all the subracks and boards), Step_by_Step (choose step by step) None Step_by_Step Step_by_Step
INACTIVE, ACTIVE None ACTIVE ACTIVE
UE_BASED, UE_ASSISTED, UE_BASED_PREFERRED, UE_ASSISTED_PREFERRED None - UE_ASSISTED
FORBIDDEN,NOT_FORBIDDEN None NOT_FORBIDDENNOT_FORBIDDEN
PEER, LOCAL None LOCAL LOCAL
NO,YES None YES YES
ENABLED, DISABLED None DISABLED DISABLED
1~4294967295 None
- None
0~65535 None
- None
QOS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF None - QOS
NP,DSP None - None
-35~15, step: 0.1 dB -20 -20
-10~50, step: 0.1 dBm
330 330
0~10, step:0.1 dB 2 2
30 to 353207 None - None
PC_AMR_MODE_INDUCE_BLER_ALTER_SWITCH, PC_DL_INNER_LOOP_PC_ACTIVE_SWITCH, PC_DOWNLINK_POWER_BALANCE_SWITCH, PC_EFACH_ECN0_DYN_ADJ_SWITCH, PC_FP_MULTI_RLS_IND_SWITCH, PC_HSUPA_HARQNUM_AUTO_ADJUST_SWITCH, PC_HSUPA_PO_UPDATE_SWITCH, PC_INNER_LOOP_LMTED_PWR_INC_SWITCH, PC_OLPC_SWITCH, PC_RL_RECFG_SIR_TARGET_CARRY_SWITCH, PC_SIG_DCH_OLPC_SWITCH, PC_UL_SIRERR_HIGH_REL_UE_SWITCH None - PC_AMR_MODE_INDUCE_BLER_ALTER_SWITCH:OFF, PC_DL_INNER_LOOP_PC_ACTIVE_SWITCH:ON, PC_DOWNLINK_POWER_BALANCE_SWITCH:ON, PC_EFACH_ECN0_DYN_ADJ_SWITCH:OFF, PC_FP_MULTI_RLS_IND_SWITCH:ON, PC_HSUPA_HARQNUM_AUTO_ADJUST_SWITCH:OFF, PC_HSUPA_PO_UPDATE_SWITCH:OFF, PC_INNER_LOOP_LMTED_PWR_INC_SWITCH:OFF, PC_OLPC_SWITCH:ON, PC_RL_RECFG_SIR_TARGET_CARRY_SWITCH:OFF, PC_SIG_DCH_OLPC_SWITCH:OFF, PC_UL_SIRERR_HIGH_REL_UE_SWITCH:OFF
1~10 s 5 5
10,20,50,100,200,500,1000 ms 1000 1000
64 to 1025 byte 128 128
0~65535 None
- None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None
- None
0.0.0.0~255.255.255.255 None - None
Valid, Invalid None
Invalid Invalid
0.0.0.0~255.255.255.255 None 255.255.255.255 255.255.255.255
0~65535 None - None
1024~65535 None - None
0~4095 None - None
IUB, IUPS, OTHER None - None
0~65535 s
30(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
30
0~300 s 30 30
250, 500, 1000, 2000, 4000, 8000, 16000 ms D4000 D4000
250, 500, 1000, 2000, 4000, 8000, 16000 ms D4000 D4000
0~1000 None 1 1
0~1000 None 1 1
1~60 s 5 5
500~32000,Step:500 ms
1(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
1
500~32000,Step:500 ms
4(ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
4
500~32000,Step:500 ms
1(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
1
500~32000,Step:500 ms
4(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
4
1, 2, 4, 8, 16, 32, 64, INFINITY None
D16(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D16
1, 2, 4, 8, 16, 32, 64, INFINITY None
D16(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D16
1, 2, 4, 8, 16, 32, 64, INFINITY None
D64(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D64
2~65535 None
- 150
0.9, 0.8, 0.7, 0.6, 0.5, 0.4, 0.3, 0.2 None - None
Disable(Not support Protocol field compress), Enable(Support Protocol field compress) None
Enable Enable
BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF None - None
BE AF11 AF12 AF13 AF21 AF22 AF23 AF31 AF32 AF33 AF41 AF42 AF43 EF None - None
0~255 None
-(ADD
FACH,ADD
PICH,ADD
PCH,ADD
SCCPCHTFC,AD
D
SCCPCHBASIC)
3(ADD
PCCPCH)
6(ADD AICH)
4(ADD
PRACHBASIC,A
DD
PRACHTFC,AD
D
PRACHASC,AD
D
PRACHSLOTFO
RMAT,ADD
PRACHACTOAS
CMAP,ADD
RACH)
2(ADD PCPICH)
0(ADD PSCH)
1(ADD SSCH)
None(ADD FACH,ADD
PRACHACTOASCMAP,A
DD PCH,ADD
SCCPCHTFC,ADD
PCCPCH,ADD
SCCPCHBASIC)
6(ADD AICH)
4(ADD
PRACHBASIC,ADD
PRACHTFC,ADD
PRACHASC,ADD
PRACHSLOTFORMAT,A
DD RACH)
2(ADD PCPICH)
8(ADD PICH)
0(ADD PSCH)
1(ADD SSCH)
1~255 None - None
0~255 None 10 10
18, 36, 72, 144 None V36 V36
-10~5 dB -7 -7
14 to 27 None - None
5 to 64 None 10 10
64 to 1024 byte 128 128
10 to 1500 byte 128 128
20 to 1024 byte 56 56
95 to 512 byte 128 128
1~256 None
- None
1~256 None
- None
100~10000 ms 10 10
0~1000 per mill 30 30
100 to 10000 ms 1 1
FG2a board: 0 to 7, GOUa board: 0 to 1 None
- None
0,2,4,6,8 None - None
0 to 7 None - None
0 to 7 None - None
0 to 7 None - None
For the FG2a board, the value range of PN is 0 to 7. For the GOUa board, the value range of PN is 0 to 1. None - None
1 to 32 None - None
0 to 250 characters None - None
1 to 250 characters None - None
10~800 ms - 50
UNI: 500~10000
NNI: 90~500 ms -
UNI: 750
NNI: 100
21~65535 None - None
IP, ATM None - None
ETHER,TRUNK None - None
CLOSE,OPEN None CLOSE CLOSE
CLOSE,OPEN None CLOSE CLOSE
CLOSE,OPEN None CLOSE CLOSE
CLOSE,OPEN None CLOSE CLOSE
CLOSE,OPEN None CLOSE CLOSE
CLOSE,OPEN None CLOSE CLOSE
-5~10 dB - In signaling transmission mode, set PowerOffsetPpm to -3; in service transmission mode, set PowerOffsetPpm to -2.
1~8 dB 2 2
0.0.0.0~255.255.255.255 None - None
0~3 None - None
UOIa(0~3), POUa(0~167), PEUa(0~127) None
- None
Disable(Not support PPP mux),Enable(Support PPP mux) None
Enable Enable
0 to 5 None - None
0~255 None 4 4
NON_PERIODIC_REPORT,250,500,1000,2000,3000,4000,6000,8000,12000,16000,20000,24000,28000,32000,64000 ms
D500(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
D500
1~64 None 20 20
SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SIGNATURE5, SIGNATURE6, SIGNATURE7, SIGNATURE8, SIGNATURE9, SIGNATURE10, SIGNATURE11, SIGNATURE12, SIGNATURE13, SIGNATURE14, SIGNATURE15. (Multiple options.) None - SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SIGNATURE5, SIGNATURE6, SIGNATURE7
OFF, ON None - OFF
OFF, ON None - ON
HIGH, NORMAL, LOW None HIGH HIGH
HIGH, LOW None - None
0~99 None
0 0
0~99 None
0 0
ARP,TrafficClass None - ARP
0~7 None 1 1
0~7 None 1 1
0~7 None 1 1
0~7 None 1 1
0~7 None 1 1
2~30 min - None
This parameter is set to 0 or 1 according to the related domains. None - None
ITUT, ANSI, TTC None ITUT ITUT
0~60 s - 20
0~60 s - 20
0~60 s - 20
0~60 s - 20
0~60 s - 20
ALL,SINGLE None - None
CORRM_SRNSR_PSBE_RELOC,CORRM_SRNSR_PSBE_DSCR None CORRM_SRNSR_PSBE_RELOC CORRM_SRNSR_PSBE_RELOC
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF13.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF13.
When the interface type is
Iu-PS, the parameter is
AF13.
0~100 None 30 30
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF13; transimssion type is
Hybird IP, the parameter is
LQAF13.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-PS, the parameter is
NULL.
0~100 None 100 100
0~100 per cent 100 100
-35~15, step: 0.1 dB -50 -50
0~100 per cent 70 70
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF43.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
When the interface type is
Iu-PS, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF43.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-PS, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 70 70
0~511 None
- None
0~100 None 30 30
0~100 None 100 100
0~100% per cent
60(ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
60
0~14400 s - 20
0~14400 s - 20
0~64800 s - 20
0~14400 s - 20
0~14400 s - 20
OFF, ON None - OFF
60~900 s - 900
0~100 per cent 100 100
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF33.
When the interface type is
Iu-PS, the parameter is
AF33.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF33; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-PS, the parameter is
NULL.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF33.
When the interface type is
Iu-PS, the parameter is
AF33.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF33; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-PS, the parameter is
NULL.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF33.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF33.
When the interface type is
Iu-PS, the parameter is
AF33.
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF33; transimssion type is
Hybird IP, the parameter is
LQAF33.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-PS, the parameter is
NULL.
0~100 None 30 30
0~100 None 100 100
0~100 None 30 30
0~100 None 100 100
SUPP_NONE,SUPP_IUFLEX,SUPP_MOCN,SUPP_IUFLEX_MOCN None - SUPP_NONE
1~10 None - None
0~100 None - 30
0~65534 None - 100
0~100 None - 90
0~65534 None - 200
FALSE,TRUE None
-
TRUE(SET
DSACAUTOALGO)
None(ADD
CELLDSACMANUALPA
RA)
ON,OFF None OFF OFF
0~100 per cent 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
AF43.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
AF43.
When the interface type is
Iu-PS, the parameter is
AF43.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
AF43; transimssion type is
Hybird IP, the parameter is
LQAF43.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-PS, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 100 100
PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH, PS_BE_INIT_RATE_DYNAMIC_CFG_SWITCH, PS_BE_IU_QOS_NEG_SWITCH, PS_RAB_DOWNSIZING_SWITCH, PS_RSC_FEEDBK_RABSETUP_CACFAIL_SWITCH, PS_STREAM_IU_QOS_NEG_SWITCH, PS_BE_STRICT_IU_QOS_NEG_SWITCH None - PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH:OFF, PS_BE_INIT_RATE_DYNAMIC_CFG_SWITCH:OFF,PS_BE_IU_QOS_NEG_SWITCH:OFF,PS_RAB_DOWNSIZING_SWITCH:ON, PS_RSC_FEEDBK_RABSETUP_CACFAIL_SWITCH:OFF, PS_STREAM_IU_QOS_NEG_SWITCH:OFF, PS_BE_STRICT_IU_QOS_NEG_SWITCH:OFF
0 to 3910000 kbit/s - None
BOOL,VALUE None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
ON, OFF None - ON
ON, OFF None - OFF
ON, OFF None - ON
FE, GE None - None
1~32 None
- 32
6~86400 s
- 1800
0~60 s - 10
ALGORITHM1, ALGORITHM2 None - ALGORITHM1
0 to 63 None - None
0 to 63 None - None
0 to 63 None - None
0 to 63 None - None
0 to 63 None - None
CS1, CS2 None CS2 CS2
0~99 None
20 20
{0~40},{255} dB 255 255
{0~40},{255} dB 255 255
{0~40},{255} dB 255 255
{0~40},{255} dB 255 255
-50~50 dB 0 0
-24~0 dB
-18(ADD
CELLSELRESEL
)
-(ADD
NRNCCELL)
-18(ADD
CELLSELRESEL)
None(ADD NRNCCELL)
TRUE,FALSE None FALSE FALSE
-115~-25,Step:2 dBm -50 -50
-115~-25, step:2 dBm
-58(ADD
CELLSELRESEL
)
-(ADD
NRNCCELL)
-58(ADD
CELLSELRESEL)
None(ADD NRNCCELL)
TRUE,FALSE None
FALSE FALSE
TRUE,FALSE None FALSE FALSE
CPICH_ECNO, CPICH_RSCP None CPICH_ECNO CPICH_ECNO
OFF, ON None - OFF
5~20 None - 5
0~99 None
- None
1~65535 s - 5
0~255 None
- None
SUBCHANEL0, SUBCHANEL1, SUBCHANEL2, SUBCHANEL3, SUBCHANEL4, SUBCHANEL5, SUBCHANEL6, SUBCHANEL7, SUBCHANEL8, SUBCHANEL9, SUBCHANEL10, SUBCHANEL11. (Multiple options.) None - SELECT ALL
10000~240000 ms - 30000
NO,YES None - NO
NO_CAPABILITY,GSM,GPRS,EDGE None - None
0~240000 ms - 120000
1~256 None
230(ADD
PCH,ADD
FACH)
1(ADD RACH)
230(ADD PCH,ADD
FACH)
1(ADD RACH)
1~65535 ms 5000 5000
0.01~0.99, step:0.01 per cent 68 68
1~65535 ms 3000 3000
0 to 250 characters None
- None
LASTRBP,APPOINTRBP None - None
300~10000 ms - 5000
300~10000 ms - 5000
300~10000 ms - 5000
0~100 per cent 96 96
10~3600, step: 10 s - 6
1~2, step:0.01 per cent 130 130
20~99 per cent 30 30
YES, NO None - None
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed None
-(ADD
CELLREDIRECT
ION,SET
REDIRECTION,
SET DRD)

DependOnNCell(
ADD CELLDRD)
DependOnNCell(ADD
CELLDRD,SET DRD)
None(ADD
CELLREDIRECTION,SET
REDIRECTION)
0~100 per cent
-
AMR:100; Other:0(SET
REDIRECTION)
AMR:100;Other:0(ADD
CELLREDIRECTION)
0~100 per cent
- 0
OFF,ONLY_TO_INTER_FREQUENCY,ONLY_TO_INTER_RAT None
- None
0~16383 None
- None
0~16383 None
- None
TRUE, FALSE None
- None
0 to 31 None - None
0 to 31 None - None
OFF, ON None - None
OFF, ON None - None
OFF,ON None - ON
RehostRighNow, RehostDelay, RehostWhen None - REHOSTRIGHNOW
2000~60000 ms - 3000
1~10000 ms - 5000
1~20000 ms - 10000
1~20000 ms - 15000
1~20000 ms - 20000
1~10000 ms - 3000
1~60000 ms - 45000
1~10000 ms - 5000
1~10000 ms - 5000
1~20000 ms - 10000
2000~60000 ms - 5000
-14.5~14.5,Step:0.5 dB - 2
1 to 250 characters None
- None
1~31 characters None
- None
0~65535 None - 0
1~4096 s - 300
NON_PERIODIC_REPORT, 250, 500, 1000, 2000, 4000, 8000, 16000 ms
D4000(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D4000
NON_PERIODIC_REPORT, 250, 500, 1000, 2000, 4000, 8000, 16000 ms
D4000(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D4000
NON_PERIODIC_REPORT, 250, 500, 1000, 2000, 4000, 8000, 16000 ms
D1000(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D1000
GSM, GPRS, EDGE None - None
RESERVED_SWITCH_0_BIT1, RESERVED_SWITCH_0_BIT2, RESERVED_SWITCH_0_BIT3, RESERVED_SWITCH_0_BIT4, RESERVED_SWITCH_0_BIT5, RESERVED_SWITCH_0_BIT6, RESERVED_SWITCH_0_BIT7, RESERVED_SWITCH_0_BIT8, RESERVED_SWITCH_0_BIT9, RESERVED_SWITCH_0_BIT10, RESERVED_SWITCH_0_BIT11, RESERVED_SWITCH_0_BIT12, RESERVED_SWITCH_0_BIT13, RESERVED_SWITCH_0_BIT14, RESERVED_SWITCH_0_BIT15, RESERVED_SWITCH_0_BIT16, RESERVED_SWITCH_0_BIT17, RESERVED_SWITCH_0_BIT18, RESERVED_SWITCH_0_BIT19, RESERVED_SWITCH_0_BIT20, RESERVED_SWITCH_0_BIT21, RESERVED_SWITCH_0_BIT22, RESERVED_SWITCH_0_BIT23, RESERVED_SWITCH_0_BIT24, RESERVED_SWITCH_0_BIT25, RESERVED_SWITCH_0_BIT26, RESERVED_SWITCH_0_BIT27, RESERVED_SWITCH_0_BIT28, RESERVED_SWITCH_0_BIT29, RESERVED_SWITCH_0_BIT30, RESERVED_SWITCH_0_BIT31, RESERVED_SWITCH_0_BIT32 None - RESERVED_SWITCH_0_BIT1:OFF, RESERVED_SWITCH_0_BIT2:OFF, RESERVED_SWITCH_0_BIT3:OFF, RESERVED_SWITCH_0_BIT4:OFF, RESERVED_SWITCH_0_BIT5:OFF, RESERVED_SWITCH_0_BIT6:OFF, RESERVED_SWITCH_0_BIT7:OFF, RESERVED_SWITCH_0_BIT8:OFF, RESERVED_SWITCH_0_BIT9:OFF, RESERVED_SWITCH_0_BIT10:OFF, RESERVED_SWITCH_0_BIT11:OFF, RESERVED_SWITCH_0_BIT12:OFF, RESERVED_SWITCH_0_BIT13:OFF, RESERVED_SWITCH_0_BIT14:OFF, RESERVED_SWITCH_0_BIT15:OFF, RESERVED_SWITCH_0_BIT16:OFF, RESERVED_SWITCH_0_BIT17:OFF, RESERVED_SWITCH_0_BIT18:OFF, RESERVED_SWITCH_0_BIT19:OFF, RESERVED_SWITCH_0_BIT20:OFF, RESERVED_SWITCH_0_BIT21:OFF, RESERVED_SWITCH_0_BIT22:OFF, RESERVED_SWITCH_0_BIT23:OFF, RESERVED_SWITCH_0_BIT24:OFF, RESERVED_SWITCH_0_BIT25:OFF, RESERVED_SWITCH_0_BIT26:OFF, RESERVED_SWITCH_0_BIT27:OFF, RESERVED_SWITCH_0_BIT28:OFF, RESERVED_SWITCH_0_BIT29:OFF, RESERVED_SWITCH_0_BIT30:OFF, RESERVED_SWITCH_0_BIT31:OFF, RESERVED_SWITCH_0_BIT32:OFF
RESERVED_SWITCH_1_BIT1, RESERVED_SWITCH_1_BIT2, RESERVED_SWITCH_1_BIT3, RESERVED_SWITCH_1_BIT4, RESERVED_SWITCH_1_BIT5, RESERVED_SWITCH_1_BIT6, RESERVED_SWITCH_1_BIT7, RESERVED_SWITCH_1_BIT8, RESERVED_SWITCH_1_BIT9, RESERVED_SWITCH_1_BIT10, RESERVED_SWITCH_1_BIT11, RESERVED_SWITCH_1_BIT12, RESERVED_SWITCH_1_BIT13, RESERVED_SWITCH_1_BIT14, RESERVED_SWITCH_1_BIT15, RESERVED_SWITCH_1_BIT16, RESERVED_SWITCH_1_BIT17, RESERVED_SWITCH_1_BIT18, RESERVED_SWITCH_1_BIT19, RESERVED_SWITCH_1_BIT20, RESERVED_SWITCH_1_BIT21, RESERVED_SWITCH_1_BIT22, RESERVED_SWITCH_1_BIT23, RESERVED_SWITCH_1_BIT24, RESERVED_SWITCH_1_BIT25, RESERVED_SWITCH_1_BIT26, RESERVED_SWITCH_1_BIT27, RESERVED_SWITCH_1_BIT28, RESERVED_SWITCH_1_BIT29, RESERVED_SWITCH_1_BIT30, RESERVED_SWITCH_1_BIT31, RESERVED_SWITCH_1_BIT32 None - RESERVED_SWITCH_1_BIT1:ON, RESERVED_SWITCH_1_BIT2:ON, RESERVED_SWITCH_1_BIT3:ON, RESERVED_SWITCH_1_BIT4:ON, RESERVED_SWITCH_1_BIT5:ON, RESERVED_SWITCH_1_BIT6:ON, RESERVED_SWITCH_1_BIT7:ON, RESERVED_SWITCH_1_BIT8:ON, RESERVED_SWITCH_1_BIT9:ON, RESERVED_SWITCH_1_BIT10:ON, RESERVED_SWITCH_1_BIT11:ON, RESERVED_SWITCH_1_BIT12:ON, RESERVED_SWITCH_1_BIT13:ON, RESERVED_SWITCH_1_BIT14:ON, RESERVED_SWITCH_1_BIT15:ON, RESERVED_SWITCH_1_BIT16:ON, RESERVED_SWITCH_1_BIT17:ON, RESERVED_SWITCH_1_BIT18:ON, RESERVED_SWITCH_1_BIT19:ON, RESERVED_SWITCH_1_BIT20:ON, RESERVED_SWITCH_1_BIT21:ON, RESERVED_SWITCH_1_BIT22:ON, RESERVED_SWITCH_1_BIT23:ON, RESERVED_SWITCH_1_BIT24:ON, RESERVED_SWITCH_1_BIT25:ON, RESERVED_SWITCH_1_BIT26:ON, RESERVED_SWITCH_1_BIT27:ON, RESERVED_SWITCH_1_BIT28:ON, RESERVED_SWITCH_1_BIT29:ON, RESERVED_SWITCH_1_BIT30:ON, RESERVED_SWITCH_1_BIT31:ON, RESERVED_SWITCH_1_BIT32:ON
0~4294967295 None - 0
0~4294967295 None - 4294967295
0~255 None - 0
0~255 None - 255
2000~60000 ms - 5000
2 to 5 s
3 3
RestrictionFixed,RestrictionFlexible None - None
0~10 None 1 1
None None - None
AM, UM, TM None - None
0~4992 bit
- None
-35~15, step:0.1 dB - None
-35~15, step:0.1 dB - None
1~10000 ms - 5000
1~10000 ms - 5000
1~10000 ms - 5000
1~10000 ms - 5000
0~4095 None
- None
0.0.0.0~255.255.255.255 None - None
0 None - 0
1~20 charaters None - None
R99, R4, R5, R6, R7 None - None
20~99 per cent 20 20
ORIGCONVCALLEST, ORIGSTREAMCALLEST, ORIGINTERCALLEST, ORIGBKGCALLEST, ORIGSUBSTRAFFCALLEST, TERMCONVCALLEST, TERMSTREAMCALLEST, TERMINTERCALLEST, TERMBKGCALLEST, EMERGCALLEST, INTERRATCELLRESELEST, INTERRATCELLCHGORDEREST, REGISTEST, DETACHEST, ORIGHIGHPRIORSIGEST, ORIGLOWPRIORSIGEST, CALLREEST, TERMHIGHPRIORSIGEST, TERMLOWPRIORSIGEST, TERMCAUSEUNKNOWN, MBMSCALLEST, DEFAULTEST None - None
0~65534 None - 200
0~100 None - 90
0~15 s - 4
1~10000 ms - 5000
1~10000 ms - 5000
1~10000 ms - 5000
1~5000 ms - 350
1~3000 ms - 1000
1~10000 ms - 5000
1~10000 ms - 5000
NO, YES None - None
0~119 None - None
0~119 None - None
SHARE, EXCLUSIVE None SHARE SHARE
SHARE, EXCLUSIVE None
- None
COMMISSIONING,UPGRADE,RESTORE None - None
UNI: 5000~20000
NNI: 1200~20000 ms -
UNI: 15000
NNI: 1500
ALL_NODES,BY_CNID None - None
OFF, ON None OFF OFF
0~5 None - 2
ALL_RNC,SINGLE_RNC None - None
This parameter is set to 0 or 1 according to the related domains. None - None
Each bit can be set ON or OFF None - None
Each bit can be set ON or OFF None - None
ON,OFF None - None
RsvdBit1, RsvdBit2, RsvdBit3, RsvdBit4, RsvdBit5, RsvdBit6, RsvdBit7, RsvdBit8, RsvdBit9, RsvdBit10, RsvdBit11, RsvdBit12, RsvdBit13, RsvdBit14, RsvdBit15, RsvdBit16 None
- None
0~4294967295 None - 0
0 to 4294967295 None - None
0~4294967295 None - 0
0~4294967295 None - 0
0~4294967295 None - 0
0~4294967295 None - 0
0~4294967295 None - 0
0~4294967295 None - 0
0~4294967295 None - 0
0~4294967295 None 0 0
0~4294967295 None 0 0
ON,OFF None - None
0~4294967295 None
0(ADD
NODEBALGOP
ARA,ADD
CELLALGOSWI
TCH)
-(SET
CACALGOSWIT
CH)
0(ADD
NODEBALGOPARA,ADD
CELLALGOSWITCH)
None(SET
CACALGOSWITCH)
0~4294967295 None - 0
ON,OFF None - None
0~4294967295 None
0(ADD
NODEBALGOP
ARA,ADD
CELLALGOSWI
TCH)
-(SET
CACALGOSWIT
CH)
0(ADD
NODEBALGOPARA,ADD
CELLALGOSWITCH)
None(SET
CACALGOSWITCH)
0~4294967295 None - 0
ON,OFF None - None
0~4294967295 None - 0
ON,OFF None - None
0~4294967295 None - 0
ON,OFF None - None
0~4294967295 None - 0
0 to 4294967295 None - None
0~4294967295 None - 0
0 to 4294967295 None - None
0~4294967295 None - 0
0 to 4294967295 None - None
0~4294967295 None - 0
NON-REVERTIVE, REVERTIVE None - None
0~4294967295 None
4294967295 4294967295
1~5 None - 1
1~65535 s - 180
1~65535 s - 180
OFF,ON None - OFF
0.0.0.0 to 255.255.255.255 None - None
0.0.0.0 to 255.255.255.255 None - None
1~65535 s - 180
1~65535 s - 180
250, 500, 1000, 2000, 4000, 8000, 16000 ms - D16000
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D64
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D5000
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte - D1024
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D0
0~100 per cent 12 12
0~100 per cent 25 25
1000~60000 ms 1000 1000
1000~60000 ms 3000 3000
1000~60000 ms 1000 1000
0~4294967295 None - None
0~1000 kbit/s 5 5
100~10000 ms 5 5
530~148930 kbit/s - None
1~3000000 kbit/s - None
0~4000000 kbit/s - None
100~1999 None
- None
768~1280 chip - 1172
768~1280 chip - 876
0~699 None - None
0~699 None - None
0 to 699 None
- None
0~699 None
- None
UNI, NNI None - None
35000~120000 ms - None
0~65535 None
- None
TRUE, FALSE None False False
0~38144,step:256 chip 50 50
ByRack,ByNodeBId,ByCellIdNone - None
30 to 70754 None - None
0~15 None - None
ON, OFF None
- None
0~599 None
- None
1 to 31 None - None
DISABLE, ENABLE None - DISABLE
HIGH, LOW None - None
0~63 None - None
SINGLE, ALL None ALL ALL
MBMS_REL, USER_REL None MBMS service MBMS service
0.0.0.0~255.255.255.255 None - None
0 to 63 character None - None
16, 32, 64, 128, 256 kbit/s
- None
ON, OFF None
-(SET DRD)
OFF(ADD
CELLDRD)
OFF
0~4294967295 None - None
SUPPORT_CS, SUPPORT_PS, SUPPORT_CS_AND_PS None - None
STREAMING, BACKGROUND None
- None
NO, YES None - None
0~255 None - 10
Dedicated, RANSharing, MOCN None - DEDICATED
-105~91, step:2 dB 0 0
HO_TO_GSM_SHOULD_BE_PERFORM, HO_TO_GSM_SHOULD_NOT_BE_PERFORM, HO_TO_GSM_SHALL_NOT_BE_PERFORM None - HO_TO_GSM_SHOULD_NOT_BE_PERFORM
0~63 None - 3
0~120 s - 60
-24~0 dB
-24(ADD
CELLINTRAFRE
QHO)
-(SET
SMLC,SET
INTRAFREQHO)
-24(SET
INTRAFREQHO,ADD
CELLINTRAFREQHO)
-20(SET SMLC)
CS_SHO_SWITCH, HSPA_SHO_SWITCH, NON_HSPA_SHO_SWITCH None - None
FALSE,TRUE None
TRUE TRUE
FALSE,TRUE None
FALSE FALSE
SIB2, SIB4, SIB12, SIB18, SIB11BIS None - None
FACH, DCH_3.4K_SIGNALLING, DCH_6.8K_SIGNALLING, DCH_13.6K_SIGNALLING, DCH_27.2K_SIGNALLING None - None
0~118 None
- None
0~15 None - None
FALSE, TRUE None TRUE TRUE
0~15 None - None
6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85 kbit/s

WBAMR_BITRA
TE_23.85K(ADD
CELLAMRCWB)
-(SET
AMRCWB)
WBAMR_BITRATE_23.8
5K
4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.20, 12.20 kbit/s

NBAMR_BITRA
TE_12.20K(ADD
CELLAMRC)
-(SET AMRC)
NBAMR_BITRATE_12.20
K
D3.4, D13.6, D27.2 kbit/s - D3.4
D3.4, D13.6, D27.2 kbit/s - D3.4
0.0.0.0~255.255.255.255 None - None
0~100 per cent 15 15
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 15 15
-32~20, step:2 dB 0 0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 None - None
0~3 None 0 0
0~3 None 1 1
0~3 None 2 2
0~3 None 3 3
D1, D2, D3, D4 None - None
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111 None B0000 B0000
DATE, WEEK, DATEWEEKNone - WEEK
A-GPS, OTDOA, CELLID_RTT, CELLID_CENTER None - All
CLOSE,OPEN None OPEN OPEN
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC None - May
{0},{2},{4},{8},{10} None
- None
0,2,4,8,10 None - None
0~10, step: 2 None - None
0,2,4,8,10 None - None
0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 None - None
0, 2, 4, 8, 10 None - None
0 to 27 None - None
14 to 27 None - None
14 to 27 None - None
0 to 27 None
- None
14 to 27 None - None
14 to 27 None - None
14,16,18,20,22,24,26 None
- None
0 to 5,8 to 27 None - None
0 to 5, 8 to 27 None - None
14 to 27 None - None
14 to 27 None
- None
29,31 None - None
0, 2, 4, 8, 10 None - None
0, 2, 4, 8, 10 None - None
0, 2, 4, 8, 10 None - None
0, 2, 4, 8, 10 None - None
0,2,4,8,10 None - None
14~27 None - None
0,2,4,8,10 None - None
0~65535 None
- None
TRUE,FALSE None - None
OFF, ON None - OFF
BIT14: 1~16383
BIT16: 1~65535
BIT24: 1~16777215 None - None
BIT14, BIT16, BIT24 None - None
1~11 characters None - None
ON,OFF None OFF OFF
WNF, DNF None
WNF WNF
10M, 100M None - 100M
{0~1},{255}, step:0.1 None 255 255
1~8 None
- None
0~15 None
- None
1024 to 3584 None - None
0~1, step:0.01 per cent 70 70
0~1, step:0.01 per cent 5 5
0~1, step:0.01 per cent 45 45
40~100 per cent - 90
DCH, HSDPA, HSPA None - DCH
FALSE, TRUE None - FALSE
0~100 per cent 15 15
1~1000 kbit/s 32 32
1~2000 kbit/s 512 512
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NOCONFIG; transimssion
type is dual stack, the
parameter is EF;
transimssion type is Hybird
IP, the parameter is LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NOCONFIG.
0~100 None 0 0
0~100 per cent 15 15
0 to 31 None - None
1 to 4 None - None
0 to 4 None - None
0.0.0.0~255.255.255.255 None - None
1 to 100 None
- None
BITS1-2MHZ, BITS2-2MHZ, BITS1-2MBPS, BITS2-2MBPS, GPS, 8KHZ, LINE1_8KHZ, LINE2_8KHZ, BITS1-T1BPS, BITS2-T1BPS None - None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 None - None
45~90 min 60 60
0~5 None
- None
0 to 5 None
- None
1 to 5 None - None
0 to 5 None
- None
1 to 5 None - None
0 to 5 None - None
0~5 None - None
0~5 None - None
0~5 None - None
0~5 None - None
0~5 None - None
0~5 None - None
0~5 None - None
None None - None
NO, YES None - YES
RT,NRT,ALL None - NRT
0~400 ms - 400
1~255 s - 60
1~100 s - 5
1~255 s - 30
SRNSR_DSCR_IUR_RESRCE_SWITCH, SRNSR_DSCR_LOC_SEPRAT_SWITCH, SRNSR_DSCR_PROPG_DELAY_SWITCH, SRNSR_DSCR_SEPRAT_DUR_SWITCH None - SRNSR_DSCR_IUR_RESRCE_SWITCH:OFF, SRNSR_DSCR_LOC_SEPRAT_SWITCH:ON, SRNSR_DSCR_PROPG_DELAY_SWITCH:OFF, SRNSR_DSCR_SEPRAT_DUR_SWITCH:ON
1~65535 s - 60
0~1048575 None - None
RSS, RBS None - None
-35~15, step: 0.1 dB -50 -50
20 to 99 per cent - 60
30 to 100 per cent - 70
SPEECH, UNKNOWN None - None
20 to 99 per cent - 80
30 to 100 per cent - 85
-105~91, step:2 dB 0 0
{-32~20},{127},step:2 dB 127 127
0 to 3 None
- None
0~3 None
- None
HOUR(hour),MIN(minute),SEC(second) None - 03&00&00
UBR, CBR, RTVBR, NRTVBR, UBR_PLUS None - It is recommended that the service type of signaling link be CBR, the real-time service be CBR or RTVBR, the non-real-time service be NRTVBR, and the OAM data link be UBR_PLUS.
1~512 None - 500
INACTIVE, ACTIVE None ACTIVE ACTIVE
00:00~23:59 min - None
00:00~23:59 min - None
00:00~23:59 min - None
1000~300000 ms - 20000
1~300 s 20 20
3~67 None 67 67
OFF, ON None OFF OFF
MANULSTP, AUTOSTP None - None
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s - D16
1~1000 kbit/s 32 32
8,16,32,64,128,144,256,384,608 kbit/s - D384
1~2000 kbit/s 512 512
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s - D16
TRUE, FALSE None
FALSE(ADD
CELLMBMSSCC
PCH,ADD
PICH,ADD
AICH,ADD
SCCPCHBASIC)
-(SET
MBMSSCCPCH)
FALSE
STTD_Supported, STTD_not_Supported None
STTD_not_Suppo
rted
STTD_not_Supported
0~2 None
- None
16~1023 byte 127 127
1 to 126,128 to 191 None - None
TRUE, FALSE None False False
FALSE, TRUE None FALSE FALSE
FALSE,TRUE None FALSE FALSE
FALSE, TRUE None FALSE FALSE
NO, YES None NO NO
NO, YES None - None
CR527_SUPPORT, CR527_NOT_SUPPORT, CR528_SUPPORT, CR528_NOT_SUPPORT, CR529_SUPPORT, CR529_NOT_SUPPORT None - None
FALSE,TRUE None FALSE FALSE
FALSE, TRUE None FALSE FALSE
FALSE,TRUE None FALSE FALSE
CLOSE,OPEN None - None
SUN, MON, TUE, WED, THU, FRI, SAT None - SUN
Close,Open None - None
BFD_OFF,BFD_ON None - None
OFF,ON None - OFF
NO, YES None YES YES
1~254 None 10 10
OFF ON None OFF OFF
0~429496729 None 0 0
OFF ON None OFF OFF
OFF ON None OFF OFF
OFF ON None OFF OFF
OFF ON None OFF OFF
OFF ON None OFF OFF
0~429496729 None 0 0
0~429496729 None 0 0
0~429496729 None 0 0
FIRST, SECOND, THIRD, FOURTH, LAST None - FIRST
1~500 None - 60
1~250 character None - None
1~250 character None - None
1~500 None - 60
1~255 min - 10
1~250 character None - None
1~250 character None - None
1~500 None - 100
1~250 character None - None
1~500 None - 180
30000~60000 ms - None
800~1500 ms - None
800~1500 ms - None
2000~3000 ms - None
800~1500 ms - None
800~1200 ms - None
180000~360000 ms - None
180000~360000 ms - None
1400~2000 ms - None
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000 ms - D2000
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000 ms - D2000
D100, D200, D400, D1000, D2000 ms - D2000
INFINITY, D5, D10, D30, D60, D120, D360, D720 min - D30
D5, D10, D15, D20, D30, D40, D50 s - None
D40, D80, D160, D320 ms - D40
1~8 s - 5
1~15 s
- 6
1~15 s - 3
D0, D2, D4, D6, D8, D12, D16, D20 s - D0
D0, D10, D30, D60, D180, D600, D1200, D1800 s - D0
D0, D10, D20, D30, D40, D50, INFINITY s - D30
0~1530 step:6 min 10 10
D0,D100, D200,D300,D400,D500, D600,D700,D800, D900,D1000,D1200,D1500,D2000 ms - D600
800~1200 ms - None
800~1200 ms - None
800~1200 ms - None
800~1200 ms - None
0.1%~100%, step: 0.1% per cent - 10
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-92
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-92
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
-92
lower than -110,-110~-48(1:-110; 2:-109; ...; 63:-48 ) dBm
16(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
16
lower than -110,-110~-48(1:-110; 2:-109; ...; 63:-48 ) dBm
16(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
16
lower than -110,-110~-48(1:-110; 2:-109; ...; 63:-48 ) dBm
16(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
16
1~12 None - None
0, 1, 2, 3, 4 None - None
0~512 None
-
Configured to 1 when
TFsNumber is 1;Configured
to 0 when TFsNumber is 2
or 3(ADD FACHDYNTFS)
None(ADD
PCHDYNTFS)
1(ADD RACHDYNTFS)
0~512 None
1(ADD
PCHDYNTFS,A
DD
FACHDYNTFS)
2(ADD
RACHDYNTFS)
1(ADD
PCHDYNTFS,ADD
FACHDYNTFS)
2(ADD RACHDYNTFS)
0~512 None 2 2
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None - None
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None - None
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None - None
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None - None
1~254 None 170 170
CHIP0, CHIP256, CHIP512, CHIP768, CHIP1024, CHIP1280, CHIP1536, CHIP1792, CHIP2048, CHIP2304 chip
- None
0~65535 None - None
1~15 None 10 10
NOT_USED, 30, 60, 120, 180, 240 s D60 D60
NOT_USED, 10, 20, 30, 40, 50, 60, 70 s D20 D20
NotUsed, 10, 20, 30, 40, 50, 60, 70 s NotUsed NotUsed
NotUsed, 30, 60, 120, 180, 240 s NotUsed NotUsed
0~255 s
60(ADD
CELLHCSHO)
-(SET HCSHO)
60
CLOSE,OPEN None OPEN OPEN
1~9 character degree Celsius 45 45
1~9 character degree Celsius 0 0
3,6,9,12,15,18,21,INFINITYdB
D3 D3
2,3,4,6,8,10,12,INFINITY dB
D2 D2
10~60000, step: 10 ms
480(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
480
10~60000, step: 10 ms
480(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
480
10~60000, step: 10 ms
480(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
480
10~60000, step:10 ms
-
20(SET LDM)
100(SET SATLDM)
10~60000, step:10 ms
-
20(SET LDM)
100(SET SATLDM)
10~60000, step:10 ms
-
100(SET LDM)
10(ground
circuit)/100(satellite
transmission)(SET
SATLDM)
10~60000, step:10 ms
- 100
10~60000, step:10 ms - 100
10~60000, step:10 ms
-
20(SET LDM)
100(SET SATLDM)
10~60000, step:10 ms
-
20(SET LDM)
100(SET SATLDM)
10~60000, step: 10 ms
480(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
480
0~511 s
180(ADD
CELLHCSHO)
-(SET HCSHO)
180
EXISTS, NOT_EXISTS None - EXISTS
1,2,3 None
- None
ACTIVE,STANDBY None - None
1~512 None - 280
0~28, step: 0.5 dB - None
0~28, step: 0.5 dB - None
1~15 None - None
High, Medium, Low None - Medium
High, Medium, Low None - Low
High, Medium, Low None - Low
High, Medium, Low None - Low
High, Medium, Low None - Low
High, Medium, Low None - Low
High, Medium, Low None - High
High, Medium, Low None - High
High, Medium, Low None - High
High, Medium, Low None - High
High, Medium, Low None - High
High, Medium, Low None - Medium
High, Medium, Low None - Medium
High, Medium, Low None - Medium
High, Medium, Low None - Medium
High, Medium, Low None - None
200 to 10000 ms 2000 2000
1 to 3 s
2 2
1~3600 s - None
1~64 ms 10 10
1 to 1024 None 4 4
0~1000 ms
0(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0
0~500000 ms 5000 5000
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D0(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
D0
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D320(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
D320
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D1280(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
D1280
0~64000,65535 ms
0(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0
0~64000 ms
0(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERFREQHO
COV)
0
0~64000 ms
0(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
0
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000 ms D240 D240
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000 ms D2560 D2560
1~100 None 2 2
1~100 None 14 14
9~163 None - None
0~163 None - None
0~163 None - None
0~163 None - None
8000~12000 ms - None
30000~90000 ms - None
ATM_TRANS, IP_TRANS, ATMANDIP_TRANS, HYBRID_IP_TRANS None ATM_TRANS ATM_TRANS
ATM_TRANS, IP_TRANS None - None
ATM_TRANS, IP_TRANS None - None
-120 to -1, 1 to 120 min - 60
0~2559 ms
-(SET
MBMSFACH,AD
D FACH)
10(ADD
CELLMBMSFAC
H,ADD PCH)
None(ADD FACH)
10(SET
MBMSFACH,ADD
CELLMBMSFACH,ADD
PCH)
0~1279 ms
-(SET
MBMSFACH,AD
D FACH)
35(ADD
CELLMBMSFAC
H,ADD PCH)
None(ADD FACH)
35(SET
MBMSFACH,ADD
CELLMBMSFACH,ADD
PCH)
0~5 None 1 1
NORMAL,FORMAT None - None
0,10,20,30,40,50,60 s
D0 D0
CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND None - None
INTERACTIVE, BACKGROUND None
- None
AMR,VP,PSR99,PSHSPA None
- None

M3UA_OVERRIDE_MOD
,
M3UA_LOADSHARE_M
OD
(For details of these two
None M3UA_LOADSHARE_MOD M3UA_LOADSHARE_MOD
0~10 None 1 1
0~65535 ms 10 10
IP, HYBRID_IP None - None
ATM,IP,ATM_IP,HYBRID_IP None
- None
1~32 None
-(ADD
FACHDYNTFS,
ADD
FACHLOCH,AD
D FACH)
1(ADD
RACHDYNTFS,
ADD RACH)
3(ADD
PCH,ADD
PCHDYNTFS)
0(ADD BCH)
None(ADD
FACHDYNTFS,ADD
FACHLOCH,ADD FACH)
1(ADD
RACHDYNTFS,ADD
RACH)
3(ADD PCH,ADD
PCHDYNTFS)
0(ADD BCH)
TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS None - None
TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS None - None
TRCH_DCH, TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS None - None
0~120 s
10(ADD
CELLHCSHO)
-(SET HCSHO)
10
0~31 s 1 1
{0~6.2},{255}, step:0.2 s 255 255
{0~31},{255} s 255 255
100 to 1999 None - None
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D320(ADD
CELLINTRAFRE
QHO)
-(SET
SMLC,SET
INTRAFREQHO)
D320(SET
INTRAFREQHO,ADD
CELLINTRAFREQHO)
D160(SET SMLC)
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D640(ADD
CELLINTRAFRE
QHO)
-(SET
SMLC,SET
INTRAFREQHO)
D640(SET
INTRAFREQHO,ADD
CELLINTRAFREQHO)
D1280(SET SMLC)
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D640(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D640
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D640(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D640
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D640(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D640
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D640(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
D640
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D640(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV)
-(SET
INTERFREQHO
NCOV)
D640
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D320(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D320
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D1280(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D1280
0,10,20,40,60,80,100,120,160,200,240,320,640,1280,2560,5000 ms
D0(ADD
CELLINTERRAT
HOCOV)
-(SET
INTERRATHOC
OV)
D0
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D640(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HONCOV)
-(SET
INTERRATHON
COV)
D640
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D240
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms - D240
0 to 7 None - None
14 to 27 None - None
0 to 7 None
- None
0~25.5, step: 0.1 s 50 50
0~4095 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0.0.0.0~255.255.255.255 None - None
0~7 None - None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 None - None
ON, OFF None - OFF
TS1,TS2,TS3,TS4,TS5,TS6,TS7,TS8,TS9,TS10,TS11,TS12,TS13,TS14,TS15,TS16,TS17,TS18,TS19,TS20,TS21,TS22,TS23,TS24,TS25,TS26,TS27,TS28,TS29,TS30,TS31 None
- None
0 to 65535 None - None
1~50 characters None - None
0~511 s
240(ADD
CELLHCSHO)
-(SET HCSHO)
240
15-bit numerical (0 to 9) string None - None
1 to 120 s 30 30
OFF, ON None - OFF
1 to 4294967295 ms - None
1 to 128 s 64 64
530~148930 kbit/s - None
1~3000000 kbit/s - None
0~4000000 kbit/s - None
TRUE, FALSE None
- None
200 to 10000 ms 500 500
10 to 60 ms 30 30
100 to 1999 None
- None
NBAP_CCP, NBAP_NCP, IUB_OAM, ALCAP None - None
0~16383 None
- None
0~16383 None
- None
TRUE, FALSE None
- None
2000~60000 ms - 5000
135~1031 byte 1031 1031
MUXCLOSE, NORTPCOMP, RTPCOMP None MUXCLOSE MUXCLOSE
MUXCLOSE, NORTPCOMP, RTPCOMP None MUXCLOSE MUXCLOSE
1~10 s 2 2
REFERENCE_TIME_FOR_GPS, REFERENCE_LOCATION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODEL, GPS_IONOSPHERIC_MODEL, GPS_UTC_MODEL, GPS_ALMANAC, GPS_ACQ_ASSIST, GPS_REALTIME_INTEGRITY None - None
REFERENCE_TIME_FOR_GPS, REFERENCE_LOCATION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODEL, GPS_IONOSPHERIC_MODEL, GPS_UTC_MODEL, GPS_ALMANAC, GPS_ACQ_ASSIST, GPS_REALTIME_INTEGRITY None - None
1~10000 ms - 5000
1~10000 ms - 5000
LOGIC(Logic uninhibit), PHYSICAL(Physical uninhibit) None - None
300 to 1000 ms 1000 1000
0~9Characters None - None
0~1, step: 0.01 None - 50
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D320
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D320
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D320
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D320(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D320
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D240(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D240
0~1, step: 0.01 None - 10
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
-
D6(SET LDM)
D3(SET SATLDM)
8, 16 kbit/s
-(SET
FRCCHLTYPEP
ARA)
D8(ADD
CELLFRC)
D8
8,16,32,64,128,144,256,384 kbit/s - D64
8,16,32,64,128,144,256,384,608,1440,2048,2880,5740 kbit/s - D608
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D640(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D640
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D1280(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D1280
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D2560(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D2560
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D1280(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D1280
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D240(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D240
1~32 None
- 5
0~1, step:0.01 None 0 0
0~1, step:0.01 None 83 83
SF/2, HIGHER_LAYER_SCHDL None SF/2 SF/2
1~10 None
3 3
1~10 None
3 3
8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D64
NORMAL, SILENT None - SILENT
8, 16, 32, 64, 128, 144, 256, 384 kbit/s
D64(ADD
CELLDCCC)
-(SET DCCC)
D64
0, 8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D64
SF4,SF8,SF16,SF32,SF64,SF128,SF256,SFOFF None SF16 SF16
0~1, step:0.01 per cent 0 0
SCHEDULED, NON-SCHEDULED None - SCHEDULED
0~1, step: 0.01 None - 10
0~400000 bit/s 200000 200000
0~1, step:0.01 per cent 20 20
1~10 None 1 1
1~32 None
- 5
1~10 None
1 1
SF4, SF8, SF16, SF32, SF64, SF128, SF256 None
SF8 SF8
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
inter-freq load
handover(ADD
CELLLDR)
BE traff rate
reduction(ADD
NODEBLDR)
inter-freq load
handover(ADD CELLLDR)
BE traff rate
reduction(ADD
NODEBLDR)
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
1~10 None
1 1
0~1, step:0.01 per cent 45 45
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
BE traff rate
reduction(ADD
CELLLDR)
no action(ADD
NODEBLDR)
BE traff rate
reduction(ADD CELLLDR)
no action(ADD
NODEBLDR)
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
NoAct,InterFreqLDHO,BERateRed,QoSRenego,CSInterRatShouldBeLDHO,PSInterRatShouldBeLDHO,AMRRateRed,MBMSDecPower,CodeAdj,CSInterRatShouldNotLDHO,PSInterRatShouldNotLDHO None
no action no action
0~1, step:0.01 per cent 55 55
16, 32, 48, 64, 96, 128, 256, 512, 1024 None D64 D64
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19 None
D19(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D19
0, 1 None - HAND_APPOINT
16, 32, 64, 128, 144, 256, 384kbit/s - D128
1~64000 ms
- 1000
0~1, step: 0.01 None - 100
0~1, step:0.01 None 75 75
0~1, step:0.01 None 80 80
0~1, step:0.01 None 75 75
0~1, step:0.01 None 60 60
1~32 None
- 5
1~10 None 3 3
0~100 None 3 3
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
- D1
0~1, step:0.01 per cent 85 85
0~10 None 0 0
10~60000, step:10 None
- 100
0~1, step:0.01 per cent 95 95
1~10 None
1 1
1~10 None
1 1
NO, YES None - NO
NO, YES None - NO
NO, YES None - NO
0~512 s
20(ADD
CELLQOSHO)
-(SET QOSHO)
20
NO, YES None - NO
NO, YES None - NO
NO, YES None - NO
NO, YES None - NO
2_Rates, 3_Rates None - 3_Rates
2_Rates, 3_Rates None - 3_Rates
8,16,32,64,128,256 None
D64(ADD
CELLCMCF)
-(SET CMCF)
D64
0~1, step: 0.01 None - 10
SCHEDULED, NON-SCHEDULED None - SCHEDULED
0~1, step: 0.01 None - 100
8, 16, 32, 64, 128, 144, 256, 384 kbit/s - D256
SCHEDULED, NON-SCHEDULED None - NON-SCHEDULED
0~82 dB - None
0~82 dB - None
0~82 dB - None
0~82 dB - None
1~200 None 80 80
1~2 dB - 1
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D640(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D640
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D640(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D640
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
D240(ADD
CELLQUALITY
MEAS)
-(SET
QUALITYMEAS
)
D240
0~990 m - None
0~3248 m - None
0~1800000 m - None
0~5905440 m - None
0~1800000 m - None
0~5905440 m - None
0 to 31(AEUa), 0 to 125(E1 of AOUa),0 to 167(T1 of AOUa). None - None
2~20 None - 2
0~1999 None - None
0~119 None - None
AEUa(128~191),AOUa(256~383),UOIa(384~447) None - None
0~65535 None - None
0~65535 None - None
0~65535 None - None
0~65535 None - None
0~65535 None - None
0~65535 None - None
0~65535 None - None
0~65535 None - None
0~65535 None
- None
D1, D2, D3, D4, D5, D6, D7, D8 None - None
-24~0 dB
-12(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-12
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-97(ADD
CELLINTERRAT
HOCOV)
-92(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
-97(SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-13(ADD
CELLINTERRAT
HOCOV)
-12(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
-13(SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-107(ADD
CELLINTERRAT
HOCOV)
-92(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
-107(SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
CPICH_EC/NO,CPICH_RSCP None

CPICH_RSCP(A
DD
CELLQOSHO)
-(SET QOSHO)
CPICH_RSCP
-24~0 dB
-12(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-13(ADD
CELLINTERRAT
HOCOV)
-12(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
-13(SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
-115~-25 dBm
-92(ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
-107(ADD
CELLINTERRAT
HOCOV)
-92(SET
INTERFREQHOCOV,AD
D
CELLINTERFREQHOCO
V)
-107(SET
INTERRATHOCOV,ADD
CELLINTERRATHOCOV
)
Disable, Enable None - None
NOTUSED, USED None - None
Disable, Enable None - None
Disable, Enable None Disable Disable
USED, NOT_USED None
NOT_USED NOT_USED
Disable, Enable None - None
ALL_USER,HALF,THIRD, QUARTER None ALL_USER ALL_USER
5~20 per cent - 5
50~100 per cent - 90
GOLD, SILVER, COPPER None
- None
Disable, Enable None - None
CELL/S, KBIT/S None - None
32~65535 None - None
CC, LOOPBACK None - CC
DISABLE, ENABLE None
DISABLE DISABLE
2 to 4094 None
- None
0 to 7 None - None
0~100 per cent 70 70
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF None -
When the interface type is
Iub, transmission type is
ATM or dual stack, the
parameter is RT_VBR;
transimssion type is IP or
Hybird IP, the parameter is
EF.
When the interface type is
Iur, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
When the interface type is
Iu-CS, transmission type is
ATM, the parameter is
RT_VBR; transimssion
type is IP, the parameter is
EF.
0~100 None 100 100
CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,LQAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQAF32,LQAF33,LQAF41,LQAF42,LQAF43,LQEF,NULL None -
When the interface type is
Iub, transmission type is
ATM or IP, the parameter is
NULL; transimssion type is
dual stack, the parameter is
EF; transimssion type is
Hybird IP, the parameter is
LQEF.
When the interface type is
Iur, transmission type is
ATM or IP, the parameter is
NULL.
When the interface type is
Iu-CS, transmission type is
ATM or IP, the parameter is
NULL.
0~100 None 0 0
0~100 per cent 70 70
DCH, HSDPA, HSPA None - DCH
EDCH_TTI_10ms, EDCH_TTI_2ms None - EDCH_TTI_10ms
CLOSE,OPEN None OPEN OPEN
1~9 character V 28.00 28.00
1~9 character V 20.00 20.00
CLOSE,OPEN None OPEN OPEN
1~9 character V 57.00 57.00
1~9 character V 42.00 42.00
0 to 1399 None - None
0~255 None - None
TRUE, FALSE None
False(ADD
CELLSETUP,AD
D
QUICKCELLSET
UP)
FALSE(ADD
NRNCCELL)
False(ADD
CELLSETUP,ADD
QUICKCELLSETUP)
FALSE(ADD
NRNCCELL)
NO, YES None - NO
0~100 None - 5
0~65534 None - 100
0~100 None - 90
0~65534 None - 200
20~64000 ms - 3000
CLOSE,OPEN None OPEN OPEN
0~2,Step:0.1 None
0(ADD
CELLINTRAFRE
QHO)
-(SET
INTRAFREQHO)
0
0~2,Step:0.1 None
0(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
-(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
0
1~32767 None -
UNI: 100
NNI: 256
M3UA_ASP, M3UA_IPSP
(For details of ASP and
IPSP, refer to RFC4666.) None M3UA_ASP M3UA_ASP
Active,Standby None Active Active
E1_UNBA, E1_BA, T1, E1 None - E1_UNBA
30 to 60000 s - 600
1~5 None - 3
0~65535 s - 180
GMT-1200(GMT-12:00), GMT-1100(GMT-11:00), GMT-1000(GMT-10:00), GMT-0930(GMT-09:30), GMT-0900(GMT-09:00), GMT-0800(GMT-08:00), GMT-0700(GMT-07:00), GMT-0600(GMT-06:00), GMT-0500(GMT-05:00), GMT-0430(GMT-04:30), GMT-0400(GMT-04:00), GMT-0330(GMT-03:30), GMT-0300(GMT-03:00), GMT-0200(GMT-02:00), GMT-0100(GMT-01:00),GMT(GMT), GMT+0100(GMT+01:00), GMT+0200(GMT+02:00), GMT+0300(GMT+03:00), GMT+0330(GMT+03:30), GMT+0400(GMT+04:00), GMT+0430(GMT+04:30), GMT+0500(GMT+05:00), GMT+0530(GMT+05:30), GMT+0545(GMT+05:45), GMT+0600(GMT+06:00), GMT+0630(GMT+06:30), GMT+0700(GMT+07:00), GMT+0800(GMT+08:00), GMT+0900(GMT+09:00), GMT+0930(GMT+09:30), GMT+1000(GMT+10:00), GMT+1030(GMT+10:30), GMT+1100(GMT+11:00), GMT+1130(GMT+11:30), GMT+1200(GMT+12:00), GMT+1245(GMT+12:45), GMT+1300(GMT+13:00), GMT+1400(GMT+14:00) None - None
Impact Parameter Relationship Service Interrupted During Modification
AAL2 Path None N (No impact on the UE in idle mode)
RNC This paramter must be configured when [PARA]ReHostPolicy[/PARA] is set to REHOSTDELAY. N (No impact on the UE in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Cell The ASCs are configured through [MML]ADD PRACHASC[/MML]. N (Impact on random access for UEs in idle mode)
Physical channel None Not involved
PPP Link(ADD
PPPLNK)
MLPPP Link,
PPP Link(ADD
MPLNK) None Not involved
RNC None N (No impact on the UE in idle mode)
RNC When [PARA]DsacAutoSwitch[/PARA] is set to ON,the parameter need configure;else,need not configure. N (No impact on the UE in idle mode)
RNC
When
[PARA]DsacAutoSwitch[/PARA
] is set to ON,the parameter need
configure;else,need not
configure.
If [MML]ADD
CELLDSACMANUALPARA[/
MML][PARA]RestrictionType[/
PARA] value is
RestrictionFixed,need set
AcRestriction value;when
[MML]ADD
CELLDSACMANUALPARA[/
MML][PARA]RestrictionType[/
PARA] value is
RestrictionFlexible,no need set
AcRestriction value.
N (No impact on the UE in idle mode)
RNC If [MML]ADD CELLDSACMANUALPARA[/MML][PARA]RestrictionType[/PARA] value is RestrictionFixed,need set AcRestriction value;when [MML]ADD CELLDSACMANUALPARA[/MML][PARA]RestrictionType[/PARA] value is RestrictionFlexible,no need set AcRestriction value. N (No impact on the UE in idle mode)
RNC
When
[PARA]DsacAutoSwitch[/PARA
] is set to ON,the parameter need
configure;else,need not
configure.
If [MML]ADD
CELLDSACMANUALPARA[/
MML][PARA]RestrictionType[/
PARA] value is
RestrictionFixed,need set
AcRestriction value;when
[MML]ADD
CELLDSACMANUALPARA[/
MML][PARA]RestrictionType[/
PARA] value is
RestrictionFlexible,no need set
AcRestriction value.
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
RNC None Y
RNC None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
None Not involved
RNC
1. When the value of
[PARA]AGPSRECEIVERTYPE
[/PARA] in [MML]ADD
GPS[/MML] is set to RNC, the
GPS data report period, DGPS
data report period, AGPS
antenna latitude, AGPS antenna
longitude, and AGPS antenna
altitude should be set.
1. When the value of
[PARA]AGPSRECEIVERTYPE
[/PARA] in [MML]ADD
GPS[/MML] is set to NODEB,
the cell ID, GPS data report
period, DGPS data report period,
AGPS antenna latitude, AGPS
antenna longitude, and AGPS
antenna altitude should be set.
1. When the value of
[PARA]AGPSRECEIVERTYPE
[/PARA] in [MML]ADD
GPS[/MML] is set to
NRNC_RNC, the RNC ID, GPS
data report period, DGPS data
report period, AGPS antenna
latitude, AGPS antenna
longitude, and AGPS antenna
altitude should be set.
1. When the value of
[PARA]AGPSRECEIVERTYPE
[/PARA] in [MML]ADD
GPS[/MML] is set to
NRNC_NODEB, the RNC ID,
cell ID, GPS data report period,
Not involved
Cell None N (Impact on acquisition indicator receiving of UEs in idle mode)
Physical channel None Not involved
RNC(SET
BOXRPT,SET
ALMLVL)
SRB(SET
ALMPORT) None Not involved
RNC None N (No impact on the UE in idle mode)
Transmission resource group When [PARA]BWMODE[/PARA] in [MML]ADD RSCGRP[/MML] is set to HALF_DUPLEX, this parameter is valid;if the [PARA]BWMODE[/PARA] in [MML]ADD RSCGRP[/MML] of upper class and lower class RSCGRP is set to HALF_DUPLEX, the [PARA]AllBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]AllBwE[/PARA] in [MML]ADD RSCGRP[/MML] of lower class RSCGRP;The [PARA]AllBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the sum of [PARA]TxBw[/PARA] and [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of lower class RSCGRP. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC When the value of [PARA]PGPSRECEIVERTYPE[/PARA] in [MML]ADD GPS[/MML] is selected, the ALTITUDE should be set. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHONCOV)
RNC(SET
INTERFREQHO
NCOV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
Adjacent
Node(ACT
VCLCC,ADD
ADJMAP,ADD
ADJNODE)
AAL2 Path(LOP
VCL,ADD
AAL2PATH)
Services carried
on the network
element with the
specific ATM
address.(ADD
AAL2RT)
IP Path(ADD
IPPATHBIND,A
DD IPPATH)
IP path(ACT
IPPM)
The adjacent node is already
configured by [MML]ADD
ADJNODE[/MML].
When the value of
[PARA]LNKT[/PARA] in
[MML]ACT VCLCC[/MML] is
set to AAL2PATH, the adjacent
node ID should be set.
When the value of
[PARA]LNKT[/PARA] in
[MML]LOP VCL[/MML] is set
to AAL2PATH, the value of
[PARA]ANI[/PARA] should be
set.
Not involved
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
SCTP None Not involved
RAB None N (No impact on the UE in idle mode)
RNC None Not involved
RNC When the value of [PARA]OT[/PARA] in [MML]LOD PATCH[/MML] Step_by_Step, the value of [PARA]AREAFLAG[/PARA] should be set. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet Port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to ARP, the ARP packet resend times should be set. Y
Ethernet Port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to ARP, the ARP packet out-time should be set. Not involved
NodeB None Not involved
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to ATMTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to ATMTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC ATT needs to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN; ATT does not need to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to PS_DOMAIN. N (For the UE in idle mode, indicating whether the MS can apply the IMSI attach/detach procedure)
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP) When the value of [PARA]AUTHTYPE[/PARA] in [MML]ADD PPPLNK[/MML] is set to PAP_V or CHAP_V, the AUTHMODE should be set. Y
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP) None Y
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP) None Y
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP) None Not involved
Ethernet port When the value of [PARA]PTYPE[/PARA] in [MML]SET ETHPORT[/MML] is set to FE,the self-confer parameter is valid. Y
Physical channel [PARA]AvailablesignatureEndIndex[/PARA] should be less than the number of preamble signatures. The preamble signature is configured by [PARA]PreambleSignatures[/PARA]. N (Impact on random access for UEs in idle mode)
Physical channel [PARA]AvailablesignatureStartIndex[/PARA] should be no greater than [PARA] AvailablesignatureEndIndex [/PARA]. N (Impact on random access for UEs in idle mode)
Physical channel None N (Impact on random access for UEs in idle mode)
RNC None N (No impact on the UE in idle mode)
SRB None Not involved
subrack When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RSS, the value of [PARA]BACK8KCLKSW1[/PARA] could be set. Y
subrack When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RSS, the value of [PARA]BACK8KCLKSW2[/PARA] could be set. Y
Cell None N (No impact on the UE in idle mode)
RNC None Not involved
Ethernet port When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to STANDBY, the backup port IP address should be set. Not involved
Ethernet port When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to STANDBY, the backup port mask should be set. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell
None Y
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Transport channel None N (Impact on cell system message receiving of UEs in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
Valid when
[PARA]BEQosPerform[/PARA]
is set to YES;
[PARA]BeDlAct2[/PARA] and
[PARA]BeDlAct3[/PARA] must
be None when
[PARA]BeDlAct1[/PARA] is set
to None;
[PARA]BeDlAct2[/PARA] and
[PARA]BeDlAct3[/PARA] must
not be equal with
[PARA]BeDlAct1[/PARA]
when
[PARA]BeDlAct1[/PARA] is
not set to None;
N (no impact on the UE in idle mode)
RNC
Valid when
[PARA]BEQosPerform[/PARA]
is set to YES;
[PARA]BeDlAct2[/PARA] must
be None when
[PARA]BeDlAct1[/PARA] is set
to None;
[PARA]BeDlAct2[/PARA] must
not be equal with
[PARA]BeDlAct1[/PARA]
when
[PARA]BeDlAct1[/PARA] is
not set to None;
[PARA]BeDlAct3[/PARA] must
be None when
[PARA]BeDlAct2[/PARA] is set
to None;
[PARA]BeDlAct3[/PARA] must
not be equal with
[PARA]BeDlAct2[/PARA] and
[PARA]BeDlAct1[/PARA]
when
[PARA]BeDlAct2[/PARA] is
N (no impact on the UE in idle mode)
RNC
Valid when
[PARA]BEQosPerform[/PARA]
is set to YES;
[PARA]BeDlAct3[/PARA] must
be None when
[PARA]BeDlAct1[/PARA] or
[PARA]BeDlAct2[/PARA] is set
to None;
[PARA]BeDlAct3[/PARA] must
not be equal with
[PARA]BeDlAct1[/PARA]
when
[PARA]BeDlAct1[/PARA] is
not set to None
[PARA]BeDlAct3[/PARA] must
not be equal with
[PARA]BeDlAct2[/PARA]
when
[PARA]BeDlAct2[/PARA] is
N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeEFach2CpcTvmThd[/
PARA]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]D2F2PTvmThd[/PARA]
<
[PARA]BeEFach2DTvmThd[/P
ARA]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeEFach2HTvmThd[/P
ARA]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeF2CpcTvmThd[/PAR
A]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]D2F2PTvmThd[/PARA]
< [PARA]F2DTvmThd[/PARA]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeF2HTvmThd[/PARA]
. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeF2HTvmThd[/PARA]
;
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeEFach2HTvmThd[/P
ARA];
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeEFach2CpcTvmThd[/
PARA];
[PARA]BeH2FTvmThd[/PARA]
<
[PARA]BeF2CpcTvmThd[/PAR
A].
N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC Valid when [PARA]BEQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
Cell(ADD
CELLDCCC)
RNC(SET
DCCC)
This parameter is available if the value of [PARA]BEQosPerform[/PARA] in [MML]SET QOSACT[/MML] is YES. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RAB At least one of this parameter and the [PARA]BetaD[/PARA] parameter must be set to 15. N (No impact on the UE in idle mode)
RAB At least one of this parameter and the [PARA]BetaC[/PARA] parameter must be set to 15. N (No impact on the UE in idle mode)
RNC
Valid when
[PARA]BEQosPerform[/PARA]
is set to YES;
[PARA]BeUlAct2[/PARA] and
[PARA]BeUlAct3[/PARA] must
be None when
[PARA]BeUlAct1[/PARA] is set
to None;
[PARA]BeUlAct2[/PARA] and
[PARA]BeUlAct3[/PARA] must
not be equal with
[PARA]BeUlAct1[/PARA]
when
[PARA]BeUlAct1[/PARA] is
not set to None;
N (no impact on the UE in idle mode)
RNC
Valid when
[PARA]BEQosPerform[/PARA]
is set to YES;
[PARA]BeUlAct2[/PARA] must
be None when
[PARA]BeUlAct1[/PARA] is set
to None;
[PARA]BeUlAct2[/PARA] must
not be equal with
[PARA]BeUlAct1[/PARA]
when
[PARA]BeUlAct1[/PARA] is
not set to None
[PARA]BeUlAct3[/PARA] must
be None when
[PARA]BeUlAct2[/PARA] is set
to None;
[PARA]BeUlAct3[/PARA] must
not be equal with
[PARA]BeUlAct2[/PARA] and
[PARA]BeUlAct1[/PARA]
when
[PARA]BeUlAct2[/PARA] is
N (no impact on the UE in idle mode)
RNC
Valid when
[PARA]BEQosPerform[/PARA]
is set to YES;
[PARA]BeUlAct3[/PARA] must
be None when
[PARA]BeUlAct1[/PARA] or
[PARA]BeUlAct2[/PARA] is set
to None;
[PARA]BeUlAct3[/PARA] must
not be equal with
[PARA]BeUlAct1[/PARA]
when
[PARA]BeUlAct1[/PARA] is
not set to None
[PARA]BeUlAct3[/PARA] must
not be equal with
[PARA]BeUlAct2[/PARA]
when
[PARA]BeUlAct2[/PARA] is
N (no impact on the UE in idle mode)
RNC Valid when [PARA]BEQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid only when [PARA]BEQosPerform[/PARA] is set to YES and [PARA]BeUlEvTrigInd[/PARA] is set to SINGLE. N (no impact on the UE in idle mode)
RNC Valid only when [PARA]BEQosPerform[/PARA] is set to YES and [PARA]BeUlEvTrigInd[/PARA] is set to SINGLE. N (no impact on the UE in idle mode)
RNC Valid when [PARA]BEQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]BEQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
Current BFD communication. When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or MBFD, the times of out-time of BFD packet should be set. Not involved
Cell This parameter must satisfy the following relationship: [PARA]BGMBR[/PARA] >= [PARA]BGGBR[/PARA]. N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]BGMBR[/PARA] >= [PARA]BGGBR[/PARA]. N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following
relationshiprelationship:
[PARA][BgnAbnormalThd]>=[
BgnUpdateThd][/PARA] . N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following
relationshiprelationship:
[PARA]BgnEndTime[/PARA]
>[PARA]MBgnStartTime[/PAR
A]
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following
relationshiprelationship:
[PARA]BgnEndTime[/PARA]
>[PARA]MBgnStartTime[/PAR
A]
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following
relationshiprelationship:
[PARA][BgnAbnormalThd]>=[
BgnUpdateThd][/PARA] . N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_DCH. The setting of the [PARA]SirAdjustStep[/PARA] parameter is associated with this parameter. Assume that this parameter is changed from BLERquality1 to BLERquality2 and [PARA]SirAdjustStep[/PARA] is changed from SirAdjustStep1 to SirAdjustStep2. Then, these values must fulfill the following condition: (1- BLERquality1) x SirAdjustStep1 / BLERquality1 = (1 - BLERquality2) x SirAdjustStep2 / BLERquality2. N (No impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This paramter is valid only when is [PARA]BlindHoFlag[/PARA] set to TRUE. N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]BlindHOFlag[/PARA] is set to TRUE. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Board None Not involved
Board None Not involved
Ethernet port None Not involved
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
E1/T1 link None Not involved
Cell None Y
E1T1 Link None Not involved
RNC When the value of [PARA]OT[/PARA] in [MML]LOD PATCH[/MML] is set to Step_by_Step, the value of [PARA]BT[/PARA] should be set. N (No impact on the UE in idle mode)
board None Y
E1T1 link None Not involved
board None Not involved
RNC When the value of [PARA]BT[/PARA] in [MML]ADD IMAGRP[/MML] is set to AEUa or AOUa, the IMA group number should be set. Not involved
Corresponding optical port None Not involved
LGC port None Not involved
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, the MAXBW and MINBW should be set. When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to OFF, the CIR should be set. Not involved
PPP Link(ADD
PPPLNK)
IMA group(ADD
IMAGRP)
Fractional
link(ADD
FRALNK)
UNILNK(ADD
UNILNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
None Not involved
LGC port
If [PARA]BWADJ[/PARA] is
set to be
ON,[PARA]BWDHORSVBW[/
PARA],[PARA]BWDCONGBW
[/PARA],[PARA]BWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PAR
A] <
[PARA]BWDCONGBW[/PAR
A] <
[PARA]BWDCONGCLRBW[/P
ARA] <
[PARA]MINBW[/PARA] or
[PARA]BWDHORSVBW[/PAR
A] =
[PARA]BWDCONGBW[/PAR
A] =
[PARA]BWDCONGCLRBW[/P
ARA] = 0.
If [PARA]BWADJ[/PARA] is
set to be
OFF,[PARA]BWDHORSVBW[/
PARA],[PARA]BWDCONGBW
[/PARA],[PARA]BWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PAR
A] <
[PARA]BWDCONGBW[/PAR
A] <
[PARA]BWDCONGCLRBW[/P
ARA] < [PARA]CIR[/PARA] or
[PARA]BWDHORSVBW[/PAR
N (No impact on the UE in idle mode)
LGC port None Not involved
AAL2 Path None N (No impact on the UE in idle mode)
IP Path [PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] must be all zero when [PARA]RxBw[/PARA] is zero,or [PARA]BWDHORSVBW[/PARA] < [PARA]BWDCONGBW[/PARA] < [PARA]BWDCONGCLRBW[/PARA] < [PARA]RxBw[/PARA]. N (no impact on the UE in connected mode)
Transmission resource group [PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML] must be all zero when [PARA]RxBw[/PARA] is zero. N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
IMA group(ADD
IMAGRP)
Fractional
link(ADD
FRALNK)
UNILNK(ADD
UNILNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
None Not involved
LGC port
If [PARA]BWADJ[/PARA] is
set to be
ON,[PARA]BWDHORSVBW[/
PARA],[PARA]BWDCONGBW
[/PARA],[PARA]BWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PAR
A] <
[PARA]BWDCONGBW[/PAR
A] <
[PARA]BWDCONGCLRBW[/P
ARA] <
[PARA]MINBW[/PARA] or
[PARA]BWDHORSVBW[/PAR
A] =
[PARA]BWDCONGBW[/PAR
A] =
[PARA]BWDCONGCLRBW[/P
ARA] = 0.
If [PARA]BWADJ[/PARA] is
set to be
OFF,[PARA]BWDHORSVBW[/
PARA],[PARA]BWDCONGBW
[/PARA],[PARA]BWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PAR
A] <
[PARA]BWDCONGBW[/PAR
A] <
[PARA]BWDCONGCLRBW[/P
ARA] < [PARA]CIR[/PARA] or
[PARA]BWDHORSVBW[/PAR
N (No impact on the UE in idle mode)
LGC port None Not involved
AAL2 Path None N (No impact on the UE in idle mode)
IP Path [PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] must be all zero when [PARA]RxBw[/PARA] is zero,or [PARA]BWDHORSVBW[/PARA] < [PARA]BWDCONGBW[/PARA] < [PARA]BWDCONGCLRBW[/PARA] < [PARA]RxBw[/PARA]. N (no impact on the UE in connected mode)
Transmission resource group [PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML] must be all zero when [PARA]RxBw[/PARA] is zero. N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
UNILNK(ADD
UNILNK)
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
None Not involved
LGC port
If [PARA]BWADJ[/PARA] is
set to be
ON,[PARA]BWDHORSVBW[/
PARA],[PARA]BWDCONGBW
[/PARA],[PARA]BWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PAR
A] <
[PARA]BWDCONGBW[/PAR
A] <
[PARA]BWDCONGCLRBW[/P
ARA] <
[PARA]MINBW[/PARA] or
[PARA]BWDHORSVBW[/PAR
A] =
[PARA]BWDCONGBW[/PAR
A] =
[PARA]BWDCONGCLRBW[/P
ARA] = 0.
If [PARA]BWADJ[/PARA] is
set to be
OFF,[PARA]BWDHORSVBW[/
PARA],[PARA]BWDCONGBW
[/PARA],[PARA]BWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]BWDHORSVBW[/PAR
A] <
[PARA]BWDCONGBW[/PAR
A] <
[PARA]BWDCONGCLRBW[/P
ARA] < [PARA]CIR[/PARA] or
[PARA]BWDHORSVBW[/PAR
N (No impact on the UE in idle mode)
LGC port None Not involved
AAL2 Path None N (No impact on the UE in idle mode)
IP Path [PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] must be all zero when [PARA]RxBw[/PARA] is zero,or [PARA]BWDHORSVBW[/PARA] < [PARA]BWDCONGBW[/PARA] < [PARA]BWDCONGCLRBW[/PARA] < [PARA]RxBw[/PARA]. N (no impact on the UE in connected mode)
Transmission resource group [PARA]BWDHORSVBW[/PARA]/[PARA]BWDCONGBW[/PARA]/[PARA]BWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML] must be all zero when [PARA]RxBw[/PARA] is zero. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
Transmission resource group When [PARA]GRPT[/PARA] in [MML]ADD RSCGRP[/MML] is set to IP, this parameter is valid. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
AAL2 Path When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. Y
IP Path None Y
IPoA PVC(ADD
IPOAPVC)
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
LGC port(ADD
ATMLOGICPOR
T)
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to FRAATM, the
CARRYFRAATMLNK is
required.
When the value of
[PARA]CARRYT[/PARA] is set
to FRAATM, this parameter is
valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
FRAATM, this parameter is
valid.
N (No impact on the UE in idle mode)
IPoA PVC(ADD
IPOAPVC)
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
LGC port(ADD
ATMLOGICPOR
T)
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to IMA, the
CARRYIMAGRPN is required.
When the value of
[PARA]CARRYT[/PARA] is set
to IMA, this parameter is valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
IMA, this parameter is valid.
N (No impact on the UE in idle mode)
NodeB
None Not involved
IPoA PVC(ADD
IPOAPVC)
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to NCORT, the
CARRYNCOPTN is required.
When the value of
[PARA]CARRYT[/PARA] is set
to NCOPT, this parameter is
valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
NCOPT, this parameter is valid.
N (No impact on the UE in idle mode)
LGC port None Not involved
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
When the value of
[PARA]CARRYT[/PARA] is set
to IMA, UNI, FRAATM,
NCOPT, or ATMLGCPORT,
this parameter is valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
UNI, IMA, FRAATM, NCOPT,
or ATM logic port, this
parameter is valid.
Not involved
SAAL When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. Not involved
LGC port None Not involved
LGC port None Not involved
AAL2 Path(ADD
AAL2PATH)
SAAL(ADD
SAALLNK)
IPoA PVC(ADD
IPOAPVC)
When the value of
[PARA]RscMngMode[/PARA]
in [MML]ADD NODEB[/MML]
of the resource corresponding
NodeB is set to EXCLUSIVE,
the AAL2PATH must carry on
ATMLGCPORT or RSCGRP
1. When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to IMA, the bearing IMA
group number, bearing VPI,
bearing VCI, TX traffic record
index, RX traffic record index,
and peer type are required.
2. When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to UNI, the bearing UNI
link number, bearing VPI,
bearing VCI, TX traffic record
index, RX traffic record index,
and peer type are required.
3. When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to FRAATM, the bearing
FRAATM link number, bearing
VPI, bearing VCI, TX traffic
record index, RX traffic record
index, and peer type are required.
4. When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
Y
IPoA PVC(ADD
IPOAPVC)
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
LGC port(ADD
ATMLOGICPOR
T)
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to UNI, the
CARRYUNILNKN is required.
When the value of
[PARA]CARRYT[/PARA] is set
to UNI, this parameter is valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
UNI, this parameter is valid.
N (No impact on the UE in idle mode)
SAAL(ADD
SAALLNK)
IPoA PVC(ADD
IPOAPVC) When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. Y
SAAL(ADD
SAALLNK)
IPoA PVC(ADD
IPOAPVC) When the value of [PARA]CARRYT[/PARA] is set to IMA, UNI, FRAATM, NCOPT, or ATMLGCPORT, this parameter is valid. Y
IPoA PVC(ADD
IPOAPVC)
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
When the value of
[PARA]CARRYT[/PARA] is set
to ATMLGCPORT, this
parameter is valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
ATM logic port, this parameter is
valid.
N (No impact on the UE in idle mode)
Subsystem None N (No impact on the UE in idle mode)
Subsystem None N (No impact on the UE in idle mode)
LGC port None N (No impact on the UE in idle mode)
Cell None Not involved
Cell
Before configuring this parameter, you need to configure the information about the common traffic logical channel by running [MML]ADD CTCH[/MML]. At the same time, you need to set the CBS scheduling parameter of the cell by running [MML]ADD CELLCBSDRX[/MML]. N (No impact on the UE in idle mode)
RNC None N (For the UE in idle mode, if this parameter is changed to ON, and the CBS service is configured correctly,the CBS messages will be received by UE.Otherwise, the CBS messages will not be received by UE.)
Cell This parameter must satisfy the following relationship: [PARA]CCCHMBR[/PARA] >= [PARA]CCCHGBR[/PARA]. N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]CCCHMBR[/PARA] >= [PARA]CCCHGBR[/PARA]. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
PVC When the value of [PARA]VCLTYPE[/PARA] in [MML]ACT VCLCC[/MML] is set to CC, the activation mode should be set. Not involved
SAAL None N (No impact on the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index None Not involved
RNC None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDB,SET
MRSCOPECTRL
,ADD
RESERVEOVSF,
ADD
PRACHACTOAS
CMAP,ADD
CELLSELRESEL
,ADD
CELLPUC,ADD
CELLMEAS,AD
D
CELLOLC,ADD
CELLLDR,ADD
CELLLDM,ADD
CELLHCS,ADD
CELLCAC,ADD
CELLALGOSWI
TCH,ADD
CELLACCESSST
RICT,ADD
CELLMBDRINT
ERFREQ,ADD
CELLMBMSFAC
H,ADD
CTCH,ADD
AICH,ADD
RACHDYNTFS,
ADD
RACH,ADD
PRACHSLOTFO
RMAT,ADD
PRACHTFC,AD
The value of this parameter is dependent on the value of [PARA]CellId[/PARA] in [MML]ADD SMLCCELL[/MML]. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell The value of this parameter must not be larger than [PARA]DlHoCeCodeResvSf[/PARA] in [MML]ADD CELLCAC[/MML]. N (No impact on the UE in idle mode)
Cell None N (no impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]CellOverrunThd[/PARA
] >=
[PARA]CellUnderrunThd[/PAR
A].
N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]CellOverrunThd[/PARA
] >=
[PARA]CellUnderrunThd[/PAR
A].
N (No impact on the UE in idle mode)
Cell
None Y
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Transport channel None Not involved
IP Path When the value of [PARA]PATHCHK[/PARA] in [MML]ADD IPPATH[/MML] is set to ENABLED, this parameter is valid. N (no impact on services when the Ping detection succeeds)
RNC None N (No impact on the UE in idle mode)
RNC(ADD
IPPATHBIND)
Ethernet
port(STR IPCHK) None Not involved
SCTP None Y
SCTP None Y
SCTP None Y
Ethernet port None Not involved
RNC
None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL) None Y
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
None N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbouring cell in cell reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbouring cell.)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to OFF, this parameter should be set. N (No impact on the UE in idle mode)
RNC None Y
Cell None Y
NodeB None N (No impact on the UE in idle mode)
Cell(ADD
CELLCMCF)
RNC(SET
CMCF)
None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC(RST
IU,RST
IURESOURCE,A
DD
CNNODE,ADD
CNDOMAIN)
RAB(ADD
TYPRABBASIC,
ADD
CELLRLPWR)
This parameter cannot be set to CS_DOMAIN when the [PARA]TrafficClass[/PARA] parameter is set to INTERACTIVE or BACKGROUND. Not involved
RNC
None Not involved
RNC None N (No impact on the UE in idle mode)
Adjacent Node None Not involved
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Cell(ADD
QUICKCELLSET
UP,ADD
GSMCELL,ADD
NRNCCELL)
(ADD
CELLSETUP)
This parameter is valid only
when
[PARA]CnOpGrpIndex[/PARA]
in [MML]ADD
CNOPERGROUP[/MML] is
added.
This paramter is valid only when
[PARA]CnOpGrpIndex[/PARA]
in [MML]ADD
CNOPERGROUP[/MML] is
added.
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC(ADD
CELLDSACMA
NUALPARA,AD
D
SAMBMSPARA,
ADD
CBSADDR,ADD
URA,ADD
NODEB,ADD
SAC,ADD
RAC,ADD
LAC,ADD
CELLMBMSSA,
ADD
MBMSSA,SET
OPERATORCFG
PARA,ADD
RNCCBCPUID,A
DD
IMSIIDNNSCNI
DMAP,ADD
NRIGLBCNIDM
AP,ADD
CNNODE,SET
IUTIMERANDN
UM,ADD
CELLCBSSAC,R
ST
IURESOURCE,R
ST IU,ADD
CZ,ADD
CNOPERATOR)
Transmission
resource
When
[PARA]RSCMNGMODE[/PAR
A] in [MML]ADD
RSCGRP[/MML] is set to
EXCLUSIVE, this parameter is
valid.
When the value of
[PARA]CNMNGMODE[/PARA
] in [MML]ADD
ADJMAP[/MML] is set to
EXCLUSIVE, the operator index
should be set.
When the value of
[PARA]RSCMNGMODE[/PAR
A] in [MML]ADD
IPLOGICPORT[/MML] is set to
EXCLUSIVE, this parameter
must be set.
The value of this parameter is
dependent on the value of
[PARA]CnOpIndex[/PARA] in
[MML]ADD SAC[/MML].
Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]CodeAdjForHsdpaSwitch[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command; This
parameter is valid only when the
[PARA]CodeBalancingDrdSwitc
h[/PARA] parameter is set to
ON.
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command. This
parameter is valid only when the
[PARA]CodeBalancingDrdSwitc
h[/PARA] parameter is set to
ON.
N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command; This
parameter is valid only when the
[PARA]CodeBalancingDrdSwitc
h[/PARA] parameter is set to
ON.
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command. This
parameter is valid only when the
[PARA]CodeBalancingDrdSwitc
h[/PARA] parameter is set to
ON.
N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. N (No impact on the UE in idle mode)
Cell This paramter is valid only when INTER_FREQ_HHO_SWITCH of the [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] is set to ON. N (No impact on the UE in idle mode)
RNC None N (For the UE in idle mode, if this parameter is changed, you need to set the corresponding code scheme so that you can correctly receive the CBS messages.)
Cell(ADD
CELLHOCOMM)
RNC(SET
HOCOMM)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLDCCC)
RNC(SET
DCCC)
This parameter is available if the value of [PARA]BEQosPerform[/PARA] in [MML]SET QOSACT[/MML] is YES. N (No impact on the UE in idle mode)
RNC When [PARA]MOCNSupport[/PARA] in [MML]SET OPERATORSHARINGMODE[/MML] is set to YES, CommPlmnUsingType needs to be set.Otherwise,it does not need. N (No impact on the UE in idle mode)
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC
1.When the value of
[PARA]PORTPROTYPE[/PAR
A] in [MML]ADD
PORTFLOWCTRLPARA[/MM
L] is set to IP, this parameter
should be set.
2.The relationship between the
congestion threshold, the recover
threshold and the packet discard
threshold must be packet discard
threshold>congestion
threshold>recover threshold.
N (No impact on the UE in idle mode)
RNC
1.When the value of
[PARA]PORTPROTYPE[/PAR
A] in [MML]ADD
PORTFLOWCTRLPARA[/MM
L] is set to IP, this parameter
should be set.
2.The relationship between the
congestion threshold, the recover
threshold and the packet discard
threshold must be packet discard
threshold>congestion
threshold>recover threshold.
N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC
1.When the value of
[PARA]PORTPROTYPE[/PAR
A] in [MML]ADD
PORTFLOWCTRLPARA[/MM
L] is set to IP, this parameter
should be set.
2.The relationship between the
congestion threshold, the recover
threshold and the packet discard
threshold must be packet discard
threshold>congestion
threshold>recover threshold.
N (No impact on the UE in idle mode)
RNC
1.When the value of
[PARA]PORTPROTYPE[/PAR
A] in [MML]ADD
PORTFLOWCTRLPARA[/MM
L] is set to IP, this parameter can
be set.
2.The relationship between the
congestion threshold, the recover
threshold and the packet discard
threshold must be packet discard
threshold>congestion
threshold>recover threshold.
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter is valid only when [PARA]ConnCellBarred[/PARA] is set to BARRED. N (No impact on the UE in idle mode)
RNC None Not involved
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell This parameter is valid only when [PARA]QualMeas[/PARA] is set to CPICH_ECNO. N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell
This parameter is valid when [PARA]SIB12Ind[/PARA] is set to TRUE. N (No impact on the UE in idle mode)
Cell
This parameter is valid when [PARA]SIB12Ind[/PARA] is set to TRUE. N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell This parameter is valid only when [PARA]ConnCellBarred[/PARA] is set to BARRED. N (No impact on the UE in idle mode)
Physical channel None N (Impact on random access for UEs in idle mode)
UE CONTEXTTYPE needs to be set when [PARA]RSTTYPE[/PARA] in [MML]RST IUR[/MML] is set to SINGLE_RNC; CONTEXTTYPE does not need to be set when [PARA]RSTTYPE[/PARA] in [MML]RST IUR[/MML] is set to ALL_RNC. Not involved
Ethernet port None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]CONVMBR[/PARA] >= [PARA]CONVGBR[/PARA]. N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]CONVMBR[/PARA] >= [PARA]CONVGBR[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLAMRCWB)
RNC(SET
AMRCWB)
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
N (no impact on the UE in idle mode)
Cell(ADD
CELLAMRC)
RNC(SET
AMRC)
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
N (no impact on the UE in idle mode)
Ethernet port None Not involved
RNC CountCThreshold needs to be set when [PARA]CounterCheckSwitch[/PARA] in [MML]SET CNTCHK[/MML] is set to ON; CountCThreshold does not need to be set when [PARA]CounterCheckSwitch[/PARA] in [MML]SET CNTCHK[/MML] is set to OFF. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL)
This paramter is valid only when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
This parameter is valid only
when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
Y
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
Cell This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA] parameter is set to NOT_USED. N (No impact on the UE in idle mode)
SCTP None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUCS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
This parameter is valid when
[PARA]NcovHoOn2GldInd[/PA
RA] in [MML]SET
INTERRATHONCOV[/MML]
is set to ON.
This parameter is valid when
[PARA]NcovHoOn2GldInd[/PA
RA] is set to ON.
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC CsInfoUpdTmr needs to be set when [PARA]CsInfoUpdFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to ON; CsInfoUpdTmr does not need to be set when [PARA]CsInfoUpdFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to OFF. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC CSNRILength needs to be set when [PARA]CsIuFlexFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to ON; CSNRILength does not need to be set when [PARA]CsIuFlexFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to OFF. N (No impact on the UE in idle mode)
RNC
When [PARA]DsacAutoSwitch[/PARA] is set to ON,the parameter need configure;else,need not configure. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUCS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Physical channel
None Not involved
Physical channel
None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Transmission resource group None Not involved
RNC None Not involved
RNC None Not involved
RNC This classified zone is not bound to other service areas. N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]D2F2PTvmThd[/PARA]
< [PARA]F2DTvmThd[/PARA];
[PARA]D2F2PTvmThd[/PARA]
<
[PARA]BeEFach2DTvmThd[/P
ARA].
N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RNC None Not involved
RNC When [PARA]MOCNSupport[/PARA] in [MML]SET OPERATORSHARINGMODE[/MML] is set to YES, DefaultCnOp optionally needs to be set.Otherwise,it does not need. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC This paramter must be configured when [PARA]ReHostPolicy[/PARA] is set to REHOSTDELAY. N (No impact on the UE in idle mode)
IMA group
On E1 working mode, the
parameter
[PARA]DELAY[/PARA] and
[PARA]DLYGB[/PARA] must
obey the following rules:
[PARA]DELAY[/PARA]*64*30
/(53*8) >
[PARA]DLYGB[/PARA] + 3*2;
[PARA]DELAY[/PARA]*64*30
/(53*8) + 3*2 +
[PARA]DLYGB[/PARA] <
1024.
On T1 working mode, they must
obey the following rules:
[PARA]DELAY[/PARA]*64*24
/(53*8) >
[PARA]DLYGB[/PARA] + 3*2;
[PARA]DELAY[/PARA]*64*24
/(53*8) + 3*2 +
[PARA]DLYGB[/PARA] <
N (No impact on the UE in idle mode)
RAB
None N (No impact on the UE in idle mode)
RNC This parameter is valid only when the [PARA]CodeBalancingDrdSwitch[/PARA] parameter is set to ON through the [MML]SET DRD[/MML] command. N (No impact on the UE in idle mode)
Cell(ADD
CELLSELRESEL
)
RNC(ADD
NRNCCELL)
This parameter is required when
the
[PARA]QrxlevminExtSup[/PAR
A] parameter is set to TRUE but
not required when the
[PARA]QrxlevminExtSup[/PAR
A] parameter is set to FALSE.
This parameter is valid only
when
[PARA]QrxlevminExtSup[/PAR
A] is set to TRUE.
N(impact on Cell Selection and Reselection of the UE in idle mode)
M3UA(ADD
M3DE)
RNC(ADD
M3LKS,ADD
M3RT) The [PARA]DENO[/PARA] field in [MML]ADD M3DE[/MML] Not involved
Ethernet port None Not involved
RNC None Not involved
Ethernet port None Not involved
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC(SET
FRCCHLTYPEP
ARA)
Cell(ADD
CELLFRC) If this parameter is set through both the [MML]SET FRCCHLTYPEPARA[/MML] and [MML]ADD CELLFRC[/MML] commands, the parameter set through the [MML]ADD CELLFRC[/MML] command takes precedence over that set through the [MML]SET FRCCHLTYPEPARA[/MML] command. N (No impact on the UE in idle mode)
RNC This parameter can be used for selection of the initial rate for BE services only when the DCCC_SWITCH under the [PARA]Chswitch[/PARA] parameter is set to on through the [MML]SET CORRMALGOSWITCH[/MML] command. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlOlcTrigThd[/PARA](
See [MML]ADD
CELLLDM[/MML]) >=
[PARA]DlCellTotalThd[/PARA]
;
[PARA]DlCellTotalThd[/PARA]
>= [PARA]DlHOThd[/PARA] .
N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DLOVSFSF[/PARA]>=
[PARA]DLCODENO[/PARA]. .
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlHOThd[/PARA] >
[PARA]DlConvAMRThd[/PAR
A];
[PARA]DlConvAMRThd[/PAR
A] >
[PARA]DlOtherThd[/PARA] .
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlHOThd[/PARA] >
[PARA]DlConvNonAMRThd[/P
ARA];
[PARA]DlConvNonAMRThd[/P
ARA] >
[PARA]DlOtherThd[/PARA] .
N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
RNC
When the value of
DlMidRateCalc is
HAND_APPOINT,the following
relationship must be satisfied:
[PARA]DlDcccRateThd[/PARA
] <=
[PARA]DlMidRateThd[/PARA].
N (no impact on the UE in idle mode)
Cell(ADD
CELLDCCC)
RNC(SET
DCCC)
This parameter is available if the
value of
[PARA]BEQosPerform[/PARA]
in [MML]SET
QOSACT[/MML] is YES.
To configure this parameter, you
must take into consideration the
actual full-coverage rate of a
certain cell. Otherwise, the QoS
would be affected.
N (no impact on the UE in idle mode)
RNC
For the BE users with the same
[PARA]TrafficClass[/PARA],
[PARA]THPClass[/PARA] and
[PARA]BearType[/PARA]
values, make sure:
[PARA]UlGBR[/PARA] of
GOLD users
([PARA]UserPriority[/PARA] is
set to GOLD) >=
[PARA]UlGBR[/PARA] of
SILVER users
([PARA]UserPriority[/PARA] is
set to SILVER) >=
[PARA]UlGBR[/PARA] of
COPPER users
([PARA]UserPriority[/PARA] is
set to COPPER).
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlHoCeCodeResvSf[/P
ARA] >=
[PARA]DlLdrCreditSfResThd[/
PARA];
[PARA]DlHoCeCodeResvSf[/P
ARA] >=
[PARA]CellLdrSfResThd[/PAR
A] .
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlCellTotalThd[/PARA]
>= [PARA]DlHOThd[/PARA] ;
[PARA]DlHOThd[/PARA] >
[PARA]DlConvAMRThd[/PAR
A];
[PARA]DlHOThd[/PARA] >
[PARA]DlConvNonAMRThd[/P
ARA] .
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) The value of this parameter must not be larger than [PARA]DlHoCeCodeResvSf[/PARA] in [MML]ADD CELLCAC[/MML]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlLdrTrigThd[/PARA]
>=
[PARA]DlLdrRelThd[/PARA];
[PARA]DlOlcRelThd[/PARA]
>=
[PARA]DlLdrRelThd[/PARA].
N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR)
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR)
None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlLdrTrigThd[/PARA]
>=
[PARA]DlLdrRelThd[/PARA];
[PARA]DlOlcTrigThd[/PARA]
>
[PARA]DlLdrTrigThd[/PARA];
[PARA]DlOtherThd[/PARA](Se
e [MML]ADD
CELLCAC[/MML]) >=
[PARA]DlLdrTrigThd[/PARA].
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC This parameter is valid when the [PARA]DlRateUpAdjLevel[/PARA] in [MML]SET DCCC[/MML] is set to 3_Rates, or when [PARA]DlRateDnAdjLevel[/PARA] in [MML]SET DCCC[/MML] is set to 3_Rates. N (no impact on the UE in idle mode)
RNC
This parameter is valid when the
[PARA]DlMidRateCalc[/PARA]
in [MML]SET DCCC[/MML] is
set to HAND_APPOINT, and
the following relationship must
be satisfied:
[PARA]DlDcccRateThd[/PARA
] <=
[PARA]DlMidRateThd[/PARA].
N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]UlModeChangeTimerLe
n[/PARA] <=
[PARA]DlModeChangeTimerLe
n[/PARA]. N (no impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlOlcTrigThd[/PARA]
>=
[PARA]DlOlcRelThd[/PARA];
[PARA]DlOlcRelThd[/PARA]
>=
[PARA]DlLdrRelThd[/PARA].
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlOlcTrigThd[/PARA]
>=
[PARA]DlOlcRelThd[/PARA];
[PARA]DlOlcTrigThd[/PARA]
>
[PARA]DlLdrTrigThd[/PARA];
[PARA]DlOlcTrigThd[/PARA]
>=
[PARA]DlCellTotalThd[/PARA]
.
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DlConvAMRThd[/PAR
A] >
[PARA]DlOtherThd[/PARA];
[PARA]DlConvNonAMRThd[/P
ARA] >
[PARA]DlOtherThd[/PARA];
[PARA]DlOtherThd[/PARA] >=
[PARA]DlLdrTrigThd[/PARA](
See [MML]ADD
CELLLDM[/MML]).
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]DLOVSFSF[/PARA]>=
[PARA]DLCODENO[/PARA]. .
N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
Cell(ADD
CELLQOSHO)
RNC(SET
QOSHO)
None N (No impact on the UE in idle mode)
RNC Valid when [PARA]VPQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell(ADD
CELLQOSHO)
RNC(SET
QOSHO)
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLCMCF)
RNC(SET
CMCF)
None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to NOPRIORITY. N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]DlThdE1[/PARA] <=
[PARA]DlThdE2[/PARA] <
[PARA]DlThdF2[/PARA] <=
[PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]DlThdE1[/PARA] <=
[PARA]DlThdE2[/PARA] <
[PARA]DlThdF2[/PARA] <=
[PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]DlThdE1[/PARA] <=
[PARA]DlThdE2[/PARA] <
[PARA]DlThdF2[/PARA] <=
[PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]DlThdE1[/PARA] <=
[PARA]DlThdE2[/PARA] <
[PARA]DlThdF2[/PARA] <=
[PARA]DlThdF1[/PARA]. N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
IMA group
1.When the value of
[PARA]BT[/PARA] in
[MML]ADD IMAGRP[/MML]
is selected, this parameter is
valid.
2.On E1 working mode, the
parameter
[PARA]DELAY[/PARA] and
[PARA]DLYGB[/PARA] must
obey the following rules:
[PARA]DELAY[/PARA]*64*30
/(53*8) >
[PARA]DLYGB[/PARA] + 3*2;
[PARA]DELAY[/PARA]*64*30
/(53*8) + 3*2 +
[PARA]DLYGB[/PARA] <
1024.
On T1 working mode, they must
obey the following rules:
[PARA]DELAY[/PARA]*64*24
/(53*8) >
[PARA]DLYGB[/PARA] + 3*2;
[PARA]DELAY[/PARA]*64*24
/(53*8) + 3*2 +
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
SRB None Not involved
RNC When the value of [PARA]SPDF[/PARA] is set to WNF, this parameter is valid. Y
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]SPDF[/PARA] is set to DNF, this parameter is valid. Y
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL) This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. Y
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL)
This paramter is valid only when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
This parameter is valid only
when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
Y
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
RNC(ADD
MTP3RT,ADD
NRNC,ADD
CNNODE,ADD
MTP3LKS,ADD
N7DPC)
M3UA(ADD
M3DE)
Adjacent
Node(ADD
ADJNODE)
The [PARA]DPX[/PARA] field
in [MML]ADD N7DPC[/MML]
The parameter
[PARA]DPX[/PARA] in
[MML]ADD N7DPC[/MML]
When the value of
[PARA]NODET[/PARA] in
[MML]ADD
ADJNODE[/MML] is set to
IUR, IUCS, or
NNI_AAL2SWITCH, or the
value of
[PARA]NODET[/PARA] in
[MML]ADD
ADJNODE[/MML] is set to
IUPS and
[PARA]SGSNFLG[/PARA] in
[MML]ADD
ADJNODE[/MML] is set to
Not involved
PVC When the value of [PARA]VCLTYPE[/PARA] in [MML]ACT VCLCC[/MML] is set to CC, the activation direction should be set. Not involved
RNC

DRA_BE_RATE_DOWN_BF_
HO_SWITCH,DRA_THROU_D
CCC_SWITCH,DRA_BE_EDC
H_TTI_RECFG_SWITCH and
DRA_HSUPA_DCCC_SWITC
H are valid when
DRA_DCCC_SWITCH is set to
ON;
For BE
service,DRA_HSDPA_STATE_
TRANS_SWITCH and
DRA_HSUPA_STATE_TRANS
_SWITCH are valid when
DRA_PS_BE_STATE_TRANS_
SWITCH is set to ON;
For RT
service,DRA_HSDPA_STATE_
TRANS_SWITCH and
DRA_HSUPA_STATE_TRANS
_SWITCH are valid when
DRA_PS_NON_BE_STATE_T
RANS_SWITCH is set to ON;
N (no impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD) If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. N (No impact on the UE in idle mode)
RNC Valid when [PARA]BEQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC The relationship between the congestion threshold, the recover threshold and the packet discard threshold must be packet discard threshold>congestion threshold>recover threshold. N (No impact on the UE in idle mode)
RNC
1.When the value of
[PARA]PORTPROTYPE[/PAR
A] in [MML]ADD
PORTFLOWCTRLPARA[/MM
L] is set to IP, this parameter can
be set.
2.The relationship between the
congestion threshold, the recover
threshold and the packet discard
threshold must be packet discard
threshold>congestion
threshold>recover threshold.
N (No impact on the UE in idle mode)
RNC
1.When the value of
[PARA]PORTPROTYPE[/PAR
A] in [MML]ADD
PORTFLOWCTRLPARA[/MM
L] is set to IP, this parameter can
be set.
2.The relationship between the
congestion threshold, the recover
threshold and the packet discard
threshold must be packet discard
threshold>congestion
threshold>recover threshold.
N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC DRXCycleLenCoef needs to be set only when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN or PS_DOMAIN. N (For the UE in idle mode, affecting its period of listening to PCHs)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP
Link(ADD
MPLNK) None Not involved
RNC None N (No impact on the UE in idle mode)
Ethernet
port(PING IP)
RNC(SET
DSCPMAP)
SCTP(ADD
SCTPLNK)
Board(SET
PHBMAP)
None Not involved
Ethernet port None Not involved
RNC None Y
E1/T1 None N (No impact on the UE in idle mode)
IP Route(ADD
IPRT)
RNC(ADD
FLOW,ADD
IPRTBIND)
The destination IP address must
not be the broadcast address or
the multicast address.
The parameter must not be the
same as any IP address that has
been configured in the RNC.
The parameter must not be the
same as the internal/external IP
address of the BAM.
Not involved
IP Route None Not involved
IP Route None Not involved
E1/T1 None N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port When the value of [PARA]BRDTYPE[/PARA] is set to FG2a, the value of [PARA]PTYPE[/PARA] is set to FE, [PARA]AUTO[/PARA] in [MML]SET ETHPORT[/MML] is set to DISABLE, the duplex is valid. N (No impact on the UE in idle mode)
RNC This paramter is valid only when [PARA]DynCellShutDownSwitch[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This paramter is valid only when [PARA]DynCellShutDownSwitch[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_1 or ON_2 or ON_3. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
IP Path When the value of [PARA]PATHCHK[/PARA] in [MML]ADD IPPATH[/MML] is set to ENABLED, this parameter is valid. N (no impact on services when the Ping detection succeeds)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC(SET FRC)
Cell(ADD
CELLFRC)
If this parameter is set through
both the [MML]SET
FRC[/MML] and [MML]ADD
CELLFRC[/MML] commands,
the parameter set through the
[MML]ADD CELLFRC[/MML]
command takes precedence over
that set through the [MML]SET
FRC[/MML] command.
If this parameter is set through
both the [MML]SET
FRCCHLTYPEPARA[/MML]
and [MML]ADD
CELLFRC[/MML] commands,
the parameter set through the
[MML]ADD CELLFRC[/MML]
command takes precedence over
that set through the [MML]SET
FRCCHLTYPEPARA[/MML]
command.
N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC(SET FRC)
Cell(ADD
CELLFRC)
If this parameter is set through
both the [MML]SET
FRC[/MML] and [MML]ADD
CELLFRC[/MML] commands,
the parameter set through the
[MML]ADD CELLFRC[/MML]
command takes precedence over
that set through the [MML]SET
FRC[/MML] command.
If this parameter is set through
both the [MML]SET
FRCCHLTYPEPARA[/MML]
and [MML]ADD
CELLFRC[/MML] commands,
the parameter set through the
[MML]ADD CELLFRC[/MML]
command takes precedence over
that set through the [MML]SET
FRCCHLTYPEPARA[/MML]
command.
N (No impact on the UE in idle mode)
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/MML] is set to DATE or DATEWEEK, the end date should be set. Y
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D1 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D10 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to D11 or D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D2 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D3 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D4 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D5 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D6 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D7 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D8 to D12. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]EdchMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]EdchMacdPduSizeNum[/PARA] parameter is set to a value within the range of D9 to D12. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS but not required when the [PARA]TrchType[/PARA] parameter is set to TRCH_HSDSCH. N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RAB This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. N (No impact on the UE in idle mode)
RAB
This parameter is required when
the [PARA]TrchType[/PARA]
parameter is set to
TRCH_EDCH_2MS or
TRCH_EDCH_10MS.
This parameter is must larger
than
[PARA]EdchTargetLittleRetrans
Num[/PARA].
N (No impact on the UE in idle mode)
RAB
This parameter is required when
the [PARA]TrchType[/PARA]
parameter is set to
TRCH_EDCH_2MS or
TRCH_EDCH_10MS.
This parameter is must less than
[PARA]EdchTargetLargeRetrans
Num[/PARA].
N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the end type should be set. Y
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (no impact on the UE in idle mode)
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/MML] is set to DATE, WEEK, or DATEWEEK, the end month should be set. Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_1 or ON_2 or ON_3. N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_2 or ON_3. N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_3. N (No impact on the UE in idle mode)
RNC
Negotiation with the peer network element is required. Not involved
Ethernet port None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the end time should be set. Y
RAB The value of this parameter must be larger than the value of the [PARA]Event4bThd[/PARA] parameter. N (No impact on the UE in idle mode)
RAB The value of this parameter must be smaller than the value of the [PARA]Event4aThd[/PARA] parameter. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/MML] is set to WEEK or DATEWEEK, the end week should be set. Y
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]EM[/PARA] in [MML]SET TZ[/MML] is set to WEEK, the end week sequence should be set. Y
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Transport channel None Not involved
Cell This parameter is consistent with [PARA]TrchId[/PARA] in [MML]ADD FACH[/MML], [MML]ADD FACHDYNTFS[/MML], and [MML]ADD FACHLOCH[/MML]. Not involved
Cell(ADD
CELLMBMSFAC
H)
RNC(SET
MSCHFACH,SE
T MBMSFACH)
None Not involved
Cell This parameter is required when the [PARA]InterFreqInterRatMeasInd[/PARA] parameter is set to INTER_FREQ, INTER_RAT or INTER_FREQ_AND_INTER_RAT but not required when the [PARA]InterFreqInterRatMeasInd[/PARA] parameter is set to NOT_REQUIRE. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (no impact on the UE in idle mode)
Ethernet port When the value of [PARA]BRDTYPE[/PARA] is set to FG2a, the value of [PARA]PTYPE[/PARA] is set to FE, [PARA]AUTO[/PARA] in [MML]SET ETHPORT[/MML] is set to DISABLE, the Flow Control is valid. N (No impact on the UE in idle mode)
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
Corresponding
optical port(SET
OPT)
Ethernet
port(SET
ETHPORT)
MLPPP Group,
PPP Link(ADD
PPPLNK,ADD
MPGRP)
UNILNK(ADD
UNILNK)
LGC port(ADD
IPLOGICPORT,
ADD
ATMLOGICPOR
T)
RNC(ADD
PORTFLOWCTR
LPARA)
When the value of
[PARA]FLOWCTRLSWITCH[/
PARA] in [MML]SET
OPT[/MML] is set to ON, the
flow control parameter index
should be set.
When the value of
[PARA]FLOWCTRLSWITCH[/
PARA] is set to ON in
[MML]SET ETHPORT[/MML],
the FCINDEX should be set.
1.When the value of
[PARA]FLOWCTRLSWITCH[/
PARA] in [MML]ADD
IPLOGICPORT[/MML] is set to
ON, this parameter should be set.
2.The type of the flow control
parameter index must be IP.
N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Link,
PPP Link(ADD
MPLNK) None Y
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL) This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. Y
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL) This paramter is valid only when [PARA]TxDiversityInd[/PARA] is set to TRUE. Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]USEFE[/PARA] in [MML]ADD NODEBESN[/MML] is set to Enable, this parameter should be set. N (No impact on the UE in idle mode)
RNC
None Not involved
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
NodeB This parameter is required when the [PARA]IsFixedMachsWinSize[/PARA] parameter is set to TRUE. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Fractional
link(ADD
FRALNK)
Corresponding
optical port(SET
OPT)
PPP Link(ADD
PPPLNK)
IMA group(ADD
IMAGRP)
LGC port(ADD
ATMLOGICPOR
T,ADD
IPLOGICPORT)
MLPPP Group,
PPP Link(ADD
MPGRP)
UNILNK(ADD
UNILNK)
Ethernet
port(SET
ETHPORT)
When the value of
[PARA]FRALNKT[/PARA] in
[MML]ADD FRALNK[/MML]
is set to ON, this parameter is
valid and the flow control
parameter index can be set.
When the value of
[PARA]BT[/PARA] in
[MML]SET OPT[/MML] is set
to UOIa and the value of
[PARA]LGCAPPTYPE[/PARA]
is set to ATM, the flow control
switch should be set.
When the value of
[PARA]FLOWCTRLSWITCH[/
PARA] in [MML]ADD
IMAGRP[/MML] is set to ON,
this parameter is valid and the
flow control parameter index
should be set.
N (No impact on the UE in idle mode)
RNC none Not involved
RNC None Not involved
This parameter cannot be modified. None Not involved
RNC None N (no impact on the UE in idle mode)
IP Path [PARA]FPMUXSWITCH[/PARA] in [MML]ADD IPPATH[/MML] can be set YES only when the adjnode type is IUB. N (no impact on the UE in connected mode and the UE in idle mode)
IP Path When the value of [PARA]FPMUXSWITCH[/PARA] in [MML]ADD IPPATH[/MML] is set to YES, this parameter is valid. N (no impact on the UE in connected mode and the UE in idle mode)
MLPPP Group None N (No impact on the UE in idle mode)
RNC None Not involved
Fractional link
1. When the value of
[PARA]FRALNKT[/PARA] in
[MML]ADD FRALNK[/MML]
is set to FRAATM, the flow
control switch and the flow
control parameter index are
required.
2. When the value of
[PARA]FRALNKT[/PARA] in
[MML]ADD FRALNK[/MML]
is set to FRAIMA, the IMA
group number is required.
N (No impact on the UE in idle mode)
IMA group None N (No impact on the UE in idle mode)
Adjacent Node The factor table index is configured by setting the value of [PARA]FTI[/PARA] in [MML]ADD FACTORTABLE[/MML]. N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
UNILNK(ADD
UNILNK)
LGC port(ADD
IPLOGICPORT)
If [PARA]BWADJ[/PARA] is
set to be
ON,[PARA]FWDHORSVBW[/
PARA],[PARA]FWDCONGBW
[/PARA],[PARA]FWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]FWDHORSVBW[/PAR
A] <
[PARA]FWDCONGBW[/PARA
] <
[PARA]FWDCONGCLRBW[/P
ARA] <
[PARA]MINBW[/PARA] or
[PARA]FWDHORSVBW[/PAR
A] =
[PARA]FWDCONGBW[/PARA
] =
[PARA]FWDCONGCLRBW[/P
ARA] = 0.
If [PARA]BWADJ[/PARA] is
set to be
OFF,[PARA]FWDHORSVBW[/
PARA],[PARA]FWDCONGBW
[/PARA],[PARA]FWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]FWDHORSVBW[/PAR
A] <
[PARA]FWDCONGBW[/PARA
] <
[PARA]FWDCONGCLRBW[/P
ARA] < [PARA]CIR[/PARA] or
[PARA]FWDHORSVBW[/PAR
Not involved
LGC port None Not involved
AAL2 Path None N (No impact on the UE in idle mode)
IP Path [PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] must be all zero when [PARA]TxBw[/PARA] is zero,or [PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] < [PARA]FWDCONGCLRBW[/PARA] < [PARA]TxBw[/PARA]. N (no impact on the UE in connected mode)
Transmission resource group [PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML] must be all zero when [PARA]TxBw[/PARA] is zero. N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
UNILNK(ADD
UNILNK)
None Not involved
LGC port
If [PARA]BWADJ[/PARA] is
set to be
ON,[PARA]FWDHORSVBW[/
PARA],[PARA]FWDCONGBW
[/PARA],[PARA]FWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]FWDHORSVBW[/PAR
A] <
[PARA]FWDCONGBW[/PARA
] <
[PARA]FWDCONGCLRBW[/P
ARA] <
[PARA]MINBW[/PARA] or
[PARA]FWDHORSVBW[/PAR
A] =
[PARA]FWDCONGBW[/PARA
] =
[PARA]FWDCONGCLRBW[/P
ARA] = 0.
If [PARA]BWADJ[/PARA] is
set to be
OFF,[PARA]FWDHORSVBW[/
PARA],[PARA]FWDCONGBW
[/PARA],[PARA]FWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]FWDHORSVBW[/PAR
A] <
[PARA]FWDCONGBW[/PARA
] <
[PARA]FWDCONGCLRBW[/P
ARA] < [PARA]CIR[/PARA] or
[PARA]FWDHORSVBW[/PAR
N (No impact on the UE in idle mode)
LGC port None Not involved
AAL2 Path None N (No impact on the UE in idle mode)
IP Path [PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] must be all zero when [PARA]TxBw[/PARA] is zero,or [PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] < [PARA]FWDCONGCLRBW[/PARA] < [PARA]TxBw[/PARA]. N (no impact on the UE in connected mode)
Transmission resource group [PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML] must be all zero when [PARA]TxBw[/PARA] is zero. N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
Fractional
link(ADD
FRALNK)
IMA group(ADD
IMAGRP)
UNILNK(ADD
UNILNK)
LGC port(ADD
IPLOGICPORT)
If [PARA]BWADJ[/PARA] is
set to be
ON,[PARA]FWDHORSVBW[/
PARA],[PARA]FWDCONGBW
[/PARA],[PARA]FWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]FWDHORSVBW[/PAR
A] <
[PARA]FWDCONGBW[/PARA
] <
[PARA]FWDCONGCLRBW[/P
ARA] <
[PARA]MINBW[/PARA] or
[PARA]FWDHORSVBW[/PAR
A] =
[PARA]FWDCONGBW[/PARA
] =
[PARA]FWDCONGCLRBW[/P
ARA] = 0.
If [PARA]BWADJ[/PARA] is
set to be
OFF,[PARA]FWDHORSVBW[/
PARA],[PARA]FWDCONGBW
[/PARA],[PARA]FWDCONGC
LRBW[/PARA] must obey the
following rules:
[PARA]FWDHORSVBW[/PAR
A] <
[PARA]FWDCONGBW[/PARA
] <
[PARA]FWDCONGCLRBW[/P
ARA] < [PARA]CIR[/PARA] or
[PARA]FWDHORSVBW[/PAR
Not involved
LGC port None Not involved
AAL2 Path None N (No impact on the UE in idle mode)
IP Path [PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD IPPATH[/MML] must be all zero when [PARA]TxBw[/PARA] is zero,or [PARA]FWDHORSVBW[/PARA] < [PARA]FWDCONGBW[/PARA] < [PARA]FWDCONGCLRBW[/PARA] < [PARA]TxBw[/PARA]. N (no impact on the UE in connected mode)
Transmission resource group [PARA]FWDHORSVBW[/PARA]/[PARA]FWDCONGBW[/PARA]/[PARA]FWDCONGCLRBW[/PARA] in [MML]ADD RSCGRP[/MML] must be all zero when [PARA]TxBw[/PARA] is zero. N (No impact on the UE in idle mode)
Physical channel Either [PARA]GainFactorBetaC[/PARA] or [PARA]GainFactorBetaD[/PARA] should be set to 15. Not involved
Physical channel Either [PARA]GainFactorBetaC[/PARA] or [PARA]GainFactorBetaD[/PARA] should be set to 15. Not involved
Ethernet port [MMLWhen the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or ARP, the gateway IP address should be set. Not involved
Cell None N (no impact on the UE in idle mode)
RNC
When the value of
[PARA]GCDF[/PARA] in
[MML]ADD GPS[/MML] is
selected as DEG, LATITUDE
and LONGTITUDE should be
set;
When the value of
[PARA]GCDF[/PARA] in
[MML]ADD GPS[/MML] is
selected as SEC,
LATITUDESEC and
LONGITUDESEC should be set.
Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLAMRCWB)
RNC(SET
AMRCWB)
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
N (no impact on the UE in idle mode)
Cell(ADD
CELLAMRC)
RNC(SET
AMRC)
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Transmission resource group None Not involved
Transmission resource group None Not involved
Cell
This paramter is valid only when [PARA]CellChoice[/PARA] is set to GSMCELL. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS but not required when the [PARA]TrchType[/PARA] parameter is set to TRCH_HSDSCH. N (No impact on the UE in idle mode)
SCTP None N (No impact on the UE in idle mode)
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
Cell(ADD
GSMCELL,ADD
CELLHCS)
RNC(ADD
NRNCCELL)
This parameter is valid only
when
[PARA]UseOfHcs[/PARA] is
set to USED.
This paramter is valid only when
[PARA]UseOfHcs[/PARA] is
set to USED.
This parameter is valid only
when
[PARA]UseOfHcs[/PARA] is
set to TRUE.
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to FRAATM, this parameter should be set. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to IMA, this parameter should be set. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to NCOPT, this parameter should be set. Not involved
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None Not involved
Cell This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to a value within the range of D1 to D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to a value within the range of D2 to D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to a value within the range of D3 to D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to a value within the range of D4 to D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to a value within the range of D5 to D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to a value within the range of D6 to D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to D7 or D8. N (No impact on the UE in idle mode)
RAB This parameter is associated with the setting of the [PARA]HsdschMacdPduSizeNum[/PARA] parameter. It is required when the [PARA]HsdschMacdPduSizeNum[/PARA] parameter is set to D8. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_HSDSCH but not required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. N (No impact on the UE in idle mode)
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is listed when the value of [PARA]TbNum[/PARA] is D1, D2, D3, or D4. N (No impact on the UE in idle mode)
RNC This parameter is listed when the value of [PARA]TbNum[/PARA] is D2, D3, or D4. N (No impact on the UE in idle mode)
RNC 1.This parameter is listed when the value of [PARA]TbNum[/PARA] is D3 or D4. N (No impact on the UE in idle mode)
RNC 1.This parameter is listed when the value of [PARA]TbNum[/PARA] is D4. N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]AllocCodeMode[/PARA] is set to Manual. N (No impact on the UE in idle mode)
Cell
This paramter is valid only when
[PARA]AllocCodeMode[/PARA
] is set to Automatic and the
value of this parameter must
satisfy the following relationship:
[PARA]HsPdschMaxCodeNum[/
PARA] >=
[PARA]HsPdschMinCodeNum[/
PARA].
N (No impact on the UE in idle mode)
Cell
This paramter is valid only when
[PARA]AllocCodeMode[/PARA
] is set to Automatic and the
value of this parameter must
satisfy the following relationship:
[PARA]HsPdschMaxCodeNum[/
PARA] >=
[PARA]HsPdschMinCodeNum[/
PARA].
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL)
This paramter is valid only when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
This parameter is valid only
when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
Y
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD,SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC This parameter is available if DRA_DCCC_SWITCH and DRA_HSUPA_DCCC_SWITCH are set to ON in [MML]SET CORRMALGOSWITCH[/MML] is YES. N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC This parameter can be used for selection of the initial rate for HSUPA BE services only when the DCCC_SWITCH under the [PARA]Chswitch[/PARA] parameter and the HSUPA_DCCC_SWITCH under the [PARA]HspaSwitch[/PARA] parameter are set to on through the [MML]SET CORRMALGOSWITCH[/MML] command. N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC None Not involved
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]HsupAuRetrnsLdTrigTh
d[/PARA] >=
[PARA]HsupAuRetrnsLdRelTh
d[/PARA].
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]HsupAuRetrnsLdTrigTh
d[/PARA] >=
[PARA]HsupAuRetrnsLdRelTh
d[/PARA].
N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
SRB None Not involved
SRB None Not involved
SRB None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]HCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to UNI, this parameter should be set. Not involved
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]CXT[/PARA] in [MML]ADD VPCLCX[/MML] is set to VCLCX, this parameter should be set. Not involved
RNC None Not involved
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV)
RNC(SET
INTERFREQHO
NCOV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(ADD
CELLMBDRINT
ERRAT,SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
IP Path When the value of [PARA]PATHCHK[/PARA] in [MML]ADD IPPATH[/MML] is set to ENABLED, this parameter is valid. N (no impact on services when the Ping detection succeeds)
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
Cell This parameter is valid only when [PARA]IdleCellBarred[/PARA] is set to BARRED. N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell This parameter is valid only when [PARA]QualMeas[/PARA] is set to CPICH_ECNO. N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell
This parameter is valid when [PARA]SIB11Ind[/PARA] is set to TRUE. N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbouring cell in cell reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbouring cell.)
Cell
This parameter is valid when [PARA]SIB11Ind[/PARA] is set to TRUE. N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose this neighbouring cell in cell reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose this neighbouring cell.)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell This parameter is valid only when [PARA]IdleCellBarred[/PARA] is set to BARRED. N (No impact on the UE in idle mode)
SAAL None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
IMA group(ADD
IMALNK,ADD
IMAGRP)
Fractional
link(ADD
FRALNK) None Not involved
IMA group None N (No impact on the UE in idle mode)
IMA group(ADD
IMALNK)
IMA link(STR
IMATST)
For AEUa, the sum of
UNI/IMA/FRA can not exceed
32,for AOUa, the sum of
UNI/IMA/FRA on an optical
port can not exceed
63(E1)/84(T1)
When the value of
[PARA]PFMT[/PARA] in
[MML]RST PFMM[/MML] is
set to IMALNK, the value of
IMALNKN can be set.
Not involved
IMA group None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]IMSMBR[/PARA] >= [PARA]IMSGBR[/PARA]. N (No impact on the UE in idle mode)
RNC None Not involved
RNC The parameter must be greater than or equal to [PARA]ImsiMin[/PARA] in [MML]ADD IMSISNAMAP[/MML]. Not involved
RNC The parameter must be less than or equal to [PARA]ImsiMax[/PARA] in [MML]ADD IMSISNAMAP[/MML]. Not involved
RNC This parameter is required when the [PARA]ImsBearEnhancedSwitch[/PARA] parameter is set to ON. N (No impact on the UE in idle mode)
RNC This parameter must be less than or equal to [PARA]ImsiRtMax[/PARA] in [MML]ADD IMSIIDNNSCNIDMAP[/MML]. Not involved
RNC This parameter must be greater than or equal to [PARA]ImsiRtMin[/PARA] in [MML]ADD IMSIIDNNSCNIDMAP[/MML]. Not involved
Cell This parameter must satisfy the following relationship: [PARA]IMSMBR[/PARA] >= [PARA]IMSGBR[/PARA]. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
SRB None Not involved
RNC When the value of [PARA]INHT[/PARA] in [MML]INH BRD[/MML] is set to LOGIC,the value range of [PARA]SN[/PARA] is 0, 2, 4, 8 to 27. When the value of [PARA]INHT[/PARA] in [MML]INH BRD[/MML] is set to PHYSICAL,the value range of [PARA]SN[/PARA] is 0 to 5, 8 to 27. Y
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]INTERACTMBR[/PARA] >= [PARA]INTERACTGBR[/PARA]. N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]INTERACTMBR[/PARA] >= [PARA]INTERACTGBR[/PARA]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be smaller than [PARA]InterFreqCsThd2FEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be smaller than [PARA]InterFreqCsThd2FRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be larger than [PARA]InterFreqCsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be larger than [PARA]InterFreqCsThd2DRscp[/PARA]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
NCOV,SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be smaller than [PARA]InterFreqHThd2FEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be smaller than [PARA]InterFreqHThd2FRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be larger than [PARA]InterFreqHThd2DEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be larger than [PARA]InterFreqHThd2DRscp[/PARA]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
NCOV,SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Sub System None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be smaller than [PARA]InterFreqR99PsThd2FEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be smaller than [PARA]InterFreqR99PsThd2FRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be larger than [PARA]InterFreqR99PsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
The value of this parameter must be larger than [PARA]InterFreqR99PsThd2DRscp[/PARA]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be smaller than [PARA]InterRatCsThd2FEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be smaller than [PARA]InterRatCsThd2FRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be larger than [PARA]InterRatCsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be larger than [PARA]InterRatCsThd2DRscp[/PARA]. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
RNC This parameter is Valid when [PARA]EmergLCSSwitch[/PARA] is set to ON. N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is Valid when [PARA]EmergLCSSwitch[/PARA] is set to ON and [PARA]InterRatHOPermit[/PARA] is set to YES. N (no impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be smaller than [PARA]InterRatHThd2FEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be smaller than [PARA]InterRatHThd2FRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be larger than [PARA]InterRatHThd2DEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]; Also the value of this parameter must be larger than [PARA]InterRatHThd2DRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Sub System None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be smaller than [PARA]InterRatR99PsThd2FEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be smaller than [PARA]InterRatR99PsThd2FRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be larger than [PARA]InterRatR99PsThd2DEcN0[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
The value of this parameter must be larger than [PARA]InterRatR99PsThd2DRscp[/PARA]. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
RNC None Y
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
This parameter is valid when [PARA]IntraFreqMeasQuantity[/PARA] is set to CPICH_EC/NO. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
This parameter is valid when [PARA]IntraFreqMeasQuantity[/PARA] is set to CPICH_RSCP. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
When
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
MIN,the value of this parameter
must satisfy the following
relationship:
[PARA]IntraFreqLdbPeriodTime
rLen[/PARA] > 2 x 60 x
[PARA]MinForDlBasicMeas[/P
ARA];
When
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
TEN_MSEC,the value of this
parameter must satisfy the
following relationship:
[PARA]IntraFreqLdbPeriodTime
rLen[/PARA] x 1000 > 2 x
[PARA]TenMsecForDlBasicMe
as[/PARA].
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Sub System None N (No impact on the UE in idle mode)
RNC This parameter is Valid when [PARA]ForcedSHOSwitch[/PARA] is set to ON. N (no impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
The value of this parameter must
satisfy the following relationship:
([PARA]IntraRelThdFor1ACSN
VP[/PARA] -
[PARA]Hystfor1A[/PARA] / 2)
<
([PARA]IntraRelThdFor1BCSN
VP[/PARA] +
[PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
The value of this parameter must
satisfy the following relationship:
([PARA]IntraRelThdFor1ACSV
P[/PARA] -
[PARA]Hystfor1A[/PARA] / 2)
<
([PARA]IntraRelThdFor1BCSV
P[/PARA] +
[PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
The value of this parameter must
satisfy the following relationship:
([PARA]IntraRelThdFor1APS[/
PARA] -
[PARA]Hystfor1A[/PARA] / 2)
<
([PARA]IntraRelThdFor1BPS[/P
ARA] +
[PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode)
RNC This parameter is Valid when [PARA]ForcedSHOSwitch[/PARA] is set to ON. N (no impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
The value of this parameter must
satisfy the following relationship:
([PARA]IntraRelThdFor1ACSN
VP[/PARA] -
[PARA]Hystfor1A[/PARA] / 2)
<
([PARA]IntraRelThdFor1BCSN
VP[/PARA] +
[PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
The value of this parameter must
satisfy the following relationship:
([PARA]IntraRelThdFor1ACSV
P[/PARA] -
[PARA]Hystfor1A[/PARA] / 2)
<
([PARA]IntraRelThdFor1BCSV
P[/PARA] +
[PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
The value of this parameter must
satisfy the following relationship:
([PARA]IntraRelThdFor1APS[/
PARA] -
[PARA]Hystfor1A[/PARA] / 2)
<
([PARA]IntraRelThdFor1BPS[/P
ARA] +
[PARA]Hystfor1B[/PARA] / 2).
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
IPOA When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to IPOAPVC,the value of [PARA]IPADDR[/PARA] should be set. N (No impact on the UE in idle mode)
Ethernet
port(ADD
ETHTRKIP,ADD
ETHIP)
RNC(ADD
IPOAPVC,ADD
DEVIP)
Global(ACT
VCLCC)
In [MML]ADD
IPOAPVC[/MML] The local [IP
address] and the [Peer IP
address] must be in the same
network segment.
When the value of
[PARA]LNKT[/PARA] in
[MML]ACT VCLCC[/MML] is
set to IPOAPVC, the IP address
should be set.
Not involved
RNC None Not involved
IP Path The [PARA]IPADDR[/PARA] in [MML]ADD IPPATH[/MML] can not be at one network segment with the peer IP address of SCTPLNK or IPPATH whose local IP address is device IP address of FG2a/GOUa in this subrack;[PARA]IPADDR[/PARA] and [PARA]PEERIPADDR[/PARA] in [MML]ADD IPPATH[/MML] must be at one network segment;([PARA]IPADDR[/PARA],[PARA]PEERIPADDR[/PARA],[PARA]PEERMASK[/PARA] in [MML]ADD IPPATH[/MML]) conflicts with other IPPATH whose type is IUPS. Not involved
PPP Link None Not involved
MLPPP Group, PPP Link None N (No impact on the UE in idle mode)
Ethernet port
None Not involved
RNC When the value of [PARA]IPLOGPORTFLAG[/PARA] in [MML]ADD NODEBIP[/MML] is set to YES, the IPLPN should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]IPLOGPORTFLAG[/PARA] in [MML]ADD NODEBIP[/MML] is set to YES, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
NodeB The parameter should be configured when [PARA]TnlBearerType[/PARA] is modified from ATM to IP or dual stack ATM/IP. N (No impact on the UE in idle mode)
Ethernet port
When the value of
[PARA]IPTYPE[/PARA] in
[MML]ADD ETHIP[/MML] is
set to SECOND, the IP address
index should be set.
When the value of
[PARA]IPTYPE[/PARA] in
[MML]ADD
ETHTRKIP[/MML] is set to
SECOND, the IP address index
should be set.
Not involved
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Ethernet port None Not involved
Transmission resource group None Not involved
NodeB None N (No impact on the UE in idle mode)
RNC None Not involved
IP path When the value of [PARA]ISQOSPATH[/PARA] in [MML]ACT IPPM[/MML] is selected as YES, the PHB should be set. Not involved
Adjacent Node When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, IUR, or IUCS, and the value of [PARA]TRANST[/PARA] in [MML]ADD ADJNODE[/MML] is set to ATM or ATM_IP, this parameter is valid. Not involved
RNC(ADD
ADJMAP,ADD
TRMMAP)
IP Path(ADD
IPPATH) None Not involved
RNC None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RAB None Not involved
RNC None N (No impact on the UE in idle mode)
Corresponding optical port None Y
Corresponding optical port When the value of [PARA]J0RXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J0 hope incept value should be set. Y
Corresponding optical port None Y
Corresponding optical port When the value of [PARA]J0TXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J0 transmit value should be set. Y
Corresponding optical port None Y
Corresponding optical port When the value of [PARA]J1RXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J1 hope incept value should be set. Y
Corresponding optical port None Y
Corresponding optical port When the value of [PARA]J1TXT[/PARA] in [MML]SET OPT[/MML] is set to 1 byte, 16 byte, or 64 byte, the J1 transmit value should be set. Y
Optical Port None Not involved
Optical Port None Not involved
Optical Port None Not involved
Optical Port None Not involved
Port None Not involved
SAAL None N (No impact on the UE in idle mode)
Ethernet port When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to PRIMARY, the KEYCHK should be set. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC(ADD
LASNAMAP,AD
D CZ,ADD
NRNCCELL,AD
D SAC,ADD
QUICKCELLSET
UP,ADD
CELLSETUP,AD
D RAC,ADD
LAC)
Cell(ADD
GSMCELL)
The value of this parameter is dependent on the value of [PARA]LAC[/PARA] in [MML]ADD SAC[/MML]. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
RNC None Not involved
RNC
None N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command.
N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
This parameter is valid only
when the
[PARA]LdbDRDSwitchDCH[/P
ARA] parameter is set to ON.
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command; This
parameter is valid only when the
[PARA]LdbDRDSwitchDCH[/P
ARA] parameter is set to ON.
N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
This parameter is valid only
when the
[PARA]LdbDRDSwitchHSDPA
[/PARA] parameter is set to ON.
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command; This
parameter is valid only when the
[PARA]LdbDRDSwitchHSDPA
[/PARA] parameter is set to ON.
N (No impact on the UE in idle mode)
RNC This parameter is valid only when the [PARA]LdbDRDLoadRemainThdDCH[/PARA] parameter is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid only when the [PARA]LdbDRDSwitchHSDPA[/PARA] parameter is set to ON. N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. N (No impact on the UE in idle mode)
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. N (No impact on the UE in idle mode)
RNC This parameter is valid only when the [PARA]LdbDRDchoice[/PARA] parameter is set to POWER. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC [PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between each other. N (No impact on the UE in idle mode)
RNC [PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between each other. N (No impact on the UE in idle mode)
RNC
When
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] and
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] are set to
MIN,the value of this parameter
must satisfy the following
relationship:
[PARA]LdrPeriodTimerLen[/PA
RA] > 2 x 60 x
[PARA]MinForUlBasicMeas[/P
ARA];
[PARA]LdrPeriodTimerLen[/PA
RA] > 2 x 60 x
[PARA]MinForDlBasicMeas[/P
ARA];
When
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] and
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] are set to
TEN_MSEC,the value of this
parameter must satisfy the
following relationship:
[PARA]LdrPeriodTimerLen[/PA
RA] x 1000 > 2 x
[PARA]TenMsecForUlBasicMe
as[/PARA];
[PARA]LdrPeriodTimerLen[/PA
RA] x 1000 > 2 x
[PARA]TenMsecForDlBasicMe
as[/PARA].
N (No impact on the UE in idle mode)
RNC [PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between each other. N (No impact on the UE in idle mode)
RNC [PARA]LdrFirstPri[/PARA],[PARA]LdrSecondPri[/PARA],[PARA]LdrThirdPri[/PARA],[PARA]LdrFourthPri[/PARA]are different between each other. N (No impact on the UE in idle mode)
RNC
1.The parameter is used in
command [MML]ADD
ADJMAP [/MML] as loadeq
table index for gold,silver,and
bronze users.
2.When TRANST of ADJNODE
is dual stack or hybird IP,loadeq
can be added.
Not involved
Adjacent Node The load EQ table index is configured by setting the value of [PARA]LEI[/PARA] in [MML]ADD LOADEQ[/MML]. N (No impact on the UE in idle mode)
Adjacent Node The load EQ table index is configured by setting the value of [PARA]LEI[/PARA] in [MML]ADD LOADEQ[/MML]. N (No impact on the UE in idle mode)
Adjacent Node The load EQ table index is configured by setting the value of [PARA]LEI[/PARA] in [MML]ADD LOADEQ[/MML]. N (No impact on the UE in idle mode)
RNC(ADD
M3LE)
M3UA(ADD
M3DE)
This is a parameter in
[MML]ADD OPC[/MML].
The [PARA]LENO[/PARA]
field in [MML]ADD
M3LE[/MML] Not involved
RNC None Not involved
Ethernet port None Not involved
RNC When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to FRAATM, this parameter should be set. Not involved
RNC When the value of [PARA]OT[/PARA] in [MML]ACT PACH[/MML] is set to Step_by_Step and the value of [PARA]BT[/PARA] is set to SPUa, DPUb, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, the Logic function type is required. N (No impact on the UE in idle mode)
Board None Not involved
Board None Not involved
RNC When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to IMA, this parameter should be set. Not involved
RNC This paramter is valid only when [PARA]DlSFLimitCMInd[/PARA] is set to TRUE. N (No impact on the UE in idle mode)
RNC The low activity rate adjustment function is invalid when [PARA]LittleRateThd[/PARA]>=[PARA]UlDcccRateThd[/PARA] and [PARA]LittleRateThd[/PARA]>=[PARA]DlDcccRateThd[/PARA]. N (no impact on the UE in idle mode)
SRB None Not involved
E1T1 link When the value of [PARA]LNKT[/PARA] in [MML]SET E1T1[/MML] is set to E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME, the value range of [PARA]LNKCODE[/PARA] is HDB3 or AMI. When the value of [PARA]LNKT[/PARA] in [MML]SET E1T1[/MML] is set to T1_SUPER_FRAME or T1_EXTENDED_SUPER_FRAME, the value range of [PARA]LNKCODE[/PARA] is B8ZS or AMI_ZCS. Not involved
E1/T1 link(SET
E1T1LOP)
Cell(LOP E1T1)
E1T1 Link(STR
E1T1TST)
E1T1 link(SET
E1T1)
Optical Port(SET
COPTLNK)
When the value of
[PARA]BT[/PARA] in
[MML]SET E1T1LOP[/MML]
is set to AEUa or PEUa, the link
number should be set and the
value range is from 0 to 31.
When the value of
[PARA]BT[/PARA] in
[MML]SET E1T1LOP[/MML]
is set to AOUa or POUa, the link
number should be set and the
value range is from 0 to 167.
When the value of
[PARA]BT[/PARA] in
[MML]LOP E1T1[/MML] is set
to AEUa or PEUa, the value
range of [PARA]LNKN[/PARA]
is 0 to 31.
When the value of
[PARA]BT[/PARA] in
[MML]LOP E1T1[/MML] is set
to AOUa or POUa, the value
range of [PARA]LNKN[/PARA]
is 0 to 167.
When the value of
[PARA]BT[/PARA] in
[MML]STR E1T1TST[/MML]
is set to AEUa or PEUa, the link
number is required and the value
range is from 0 to 31.
When the value of
[PARA]BT[/PARA] in
[MML]STR E1T1TST[/MML]
is set to AOUa or POUa, the link
N (No impact on the UE in idle mode)
RNC None Not involved
RNC
None Not involved
E1T1 link When the value of [PARA]LS[/PARA] in [MML]SET E1T1[/MML] is set to SINGLE,the value range of [PARA]LNKT[/PARA] is E1_DOUBLE_FRAME,E1_CRC4_MULTI_FRAME,T1_SUPER_FRAME,T1_EXTENDED_SUPER_FRAME. When the value of [PARA]LS[/PARA] in [MML]SET E1T1[/MML] is set to ALL,the value range of [PARA]LNKT[/PARA] is controlled by [PARA]WORKMODE[/PARA]. When [PARA]WORKMODE[/PARA] is E1_UNBA,E1_BA,or E1,the value range of [PARA]LNKT[/PARA] is E1_DOUBLE_FRAME,E1_CRC4_MULTI_FRAME. When the value of [PARA]WORKMODE[/PARA] in [MML]SET E1T1[/MML] is set to T1,the value range of [PARA]LNKT[/PARA] is T1_SUPER_FRAME,T1_EXTENDED_SUPER_FRAME. Not involved
Communication
Link(ACT
VCLCC)
VCL(LOP VCL) None Not involved
RNC The parameter must not be the same as any IP address that has been configured in the RNC. Not involved
MLPPP Group, MLPPP Link None N (No impact on the UE in idle mode)
Ethernet port None Not involved
NodeB
None Y
SCTP None Y
SCTP None Y
SCTP When the value of [PARA]MODE[/PARA] in [MML]ADD SCTPLNK[/MML] is set to Client, this parameter can be modified. Y
RNC None Not involved
SCTP This parameter determines whether [PARA]LOGPORTSN[/PARA] and [PARA]LOGPORTNO[/PARA] in [MML]ADD SCTPLNK[/MML] are valid. Y
SCTP When the value of [PARA]LOGPORTFLAG[/PARA] in [MML]ADD SCTPLNK[/MML] is set to ON, this parameter is valid. Y
SCTP When the value of [PARA]LOGPORTFLAG[/PARA] in [MML]ADD SCTPLNK[/MML] is set to ON, this parameter is valid. Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
E1/T1 link(SET
E1T1LOP)
Loopback optical
port(SET
OPTLOP)
None Y
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to NCOPT, this parameter should be set. Not involved
LGC port(ADD
IPLOGICPORT)
IP Path(ADD
IPPATH) When the value of [PARA]CARRYFLAG[/PARA] in [MML]ADD IPPATH[/MML] is set to IP LGCPORT, this parameter is valid. Not involved
LGC port None Not involved
IP Path When the value of [PARA]CARRYFLAG[/PARA] in [MML]ADD IPPATH[/MML] is set to IP LGCPORT, this parameter is valid. Y
LGC port None Not involved
E1T1 link None Not involved
Optical Port None Not involved
RNC None Not involved
RNC None Not involved
RNC When the value of [PARA]LCARRYT[/PARA] in [MML]ADD VPCLCX[/MML] is set to UNI, this parameter should be set. Not involved
RNC When the value of [PARA]CXT[/PARA] in [MML]ADD VPCLCX[/MML] is set to VCLCX, this parameter should be set. Not involved
RNC None Not involved
The SCTP links of all the subracks, which work as the server and whose upper layer is M3UA None Y
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC This parameter is valid when [PARA]DtxInvalid[/PARA] is set to ON. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet
port(PING
MAC,ACT
ETHCC,ADD
ETHMEP,ADD
ETHMA)
RNC(TRC
MAC)
None Not involved
NodeB
When [PARA]CARRYLNKT[/PARA] is SAAL-SCTP, this parameter is valid. Not involved
Ethernet port None Not involved
RNC None N (no impact on the UE in idle mode)
UE MASK needs to be set when [PARA]CONTEXTTYPE[/PARA] in [MML]RST IUR[/MML] is set to Context_Group; MASK does not need to be set when [PARA]CONTEXTTYPE[/PARA] in [MML]RST IUR[/MML] is set to Context or All_Contexts. Not involved
RNC None Not involved
PPP Link None Not involved
MLPPP Group, MLPPP Link None N (No impact on the UE in idle mode)
Ethernet port None Not involved
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
Cell(ADD
CELLSELRESEL
)
RNC(ADD
NRNCCELL)
This parameter is valid only when [PARA]MaxAllowedUlTxPowerInd[/PARA] is set to TRUE. N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
SCTP The value to be set should be larger than the value of [PARA]MAXPATHRETR[/PARA] in [MML]ADD SCTPLNK[/MML]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RAB
None N (No impact on the UE in idle mode)
LGC port
1.When the value of
[PARA]BWADJ[/PARA] in
[MML]ADD
IPLOGICPORT[/MML] is set to
ON, this parameter should be set.
2.[PARA]MINBW[/PARA]
must be less than
[PARA]MAXBW[/PARA].
N (No impact on the UE in idle mode)
RNC
The value of this parameter must
satisfy the following relationship:
[PARA]MaxCAPSLowLoad[/P
ARA] >
[PARA]MaxCAPSMidLoad[/PA
RA] >
[PARA]SharingOutCAPSMidLo
ad[/PARA].
N (No impact on the UE in idle mode)
RNC
The value of this parameter must
satisfy the following relationship:
[PARA]MaxCAPSLowLoad[/P
ARA] >
[PARA]MaxCAPSMidLoad[/PA
RA] >
[PARA]SharingOutCAPSMidLo
ad[/PARA].
N (No impact on the UE in idle mode)
SAAL None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Transport channel None Not involved
RNC None N (no impact on the UE in idle mode)
RNC The value of this parameter must not larger than [PARA]MaxCellInActiveSet[/PARA] of [MML]SET INTRAFREQHO[/MML] or [MML]ADD CELLINTRAFREQHO[/MML]. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]TrchType[/PARA] parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Transport channel None N (No impact on the UE in idle mode)
IP Path When the value of [PARA]FPMUXSWITCH[/PARA] in [MML]ADD IPPATH[/MML] is set to YES,this parameter is valid. N (no impact on the UE in connected mode and the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP)
[PARA]MAXMFLEN[/PARA]
must not be less than
[PARA]MAXSFLEN[/PARA]*2
+8.
When the value of
[PARA]PPPMUX[/PARA] in
[MML]ADD MPGRP[/MML] is
set to ENABLE, this parameter
should be set.
Y
NodeB None N (No impact on the UE in idle mode)
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
SCTP The value to be set should be smaller than the value of [PARA]MAXASSOCRETR[/PARA] in [MML]ADD SCTPLNK[/MML]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
SAAL None N (No impact on the UE in idle mode)
RNC
The value of this parameter must
be set to meet the following
conditions:
100 x
[PARA]MaxQueueTimeLen[/PA
RA] >
[PARA]PollTimerLen[/PARA].
N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MPGRP,
PPPLNK(ADD
MPGRP)
[PARA]MAXMFLEN[/PARA]
must not be less than
[PARA]MAXSFLEN[/PARA]*2
+8.
1.When the value of
[PARA]PPPMUX[/PARA] in
[MML]ADD MPGRP[/MML] is
set to ENABLE, this parameter
should be set.
2.[PARA]MAXMFLEN[/PARA
] must not be less than
[PARA]MAXSFLEN[/PARA]*2
+8.
Y
Cell None N (No impact on the UE in idle mode)
RNC None Not involved
Cell
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
RNC None Not involved
Ethernet port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to MBFD, the multi hop BFD detect local IP should be set. Not involved
RNC Only valid to the slot of FG2a and GOUa. Not involved
RNC None Not involved
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None Not involved
Cell None N (No impact on the UE in idle mode)
RNC This parameter is used with the [MML]ADD MBMSALARMSERVICE[/MML] command to enable the no MBMS data check. If the [MML]ADD MBMSALARMSERVICE[/MML] specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.The parameter modification has no impact on the equipment. N (No impact on the UE in idle mode)
RNC This parameter is valid olny when [PARA]MbmsSwitch[/PARA] is ON. N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBMSSA)
RNC(ADD
SAMBMSPARA,
ADD MBMSSA)
None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Cell(ADD
CELLMBMSPA
RA)
RNC(SET
RNCMBMSPAR
A,ADD
SAMBMSPARA)
None N (No impact on the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to RTVBR or NRTVBR, this parameter should be set. Not involved
RNC(SET
MBMSPERF,AD
D
IMSISNAMAP,A
DD
LASNAMAP,AD
D
CNOPERATOR)
Cell(ADD
GSMCELL)
None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
MLPPP Group When the value of [PARA]MPTYPE[/PARA] in [MML]ADD MPGRP[/MML] is set to MCPPP, this parameter should be set. N (No impact on the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index When the value of [PARA]ST[/PARA] in [MML]ADD ATMTRF[/MML] is set to UBR_PLUS, the Minimum cell rate should be set. Not involved
Ethernet port
None Not involved
Ethernet port None Not involved
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Ethernet port
None Not involved
Ethernet port None Not involved
Ethernet port When the value of [PARA]MEPTYPE[/PARA] in [MML]ADD ETHMEP[/MML] is set to LocalMep, the PortNo and PortType should be set. Not involved
MLPPP Group, MLPPP Link None N (No impact on the UE in idle mode)
Cell None Not involved
Cell None N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]STTDSupInd[/PARA] of [MML]ADD CELLSETUP[/MML] is set to STTD_Supported. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
Transport channel None Not involved
NodeB None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
) Valid when [PARA]ChoiceRptUnitForAmrE[/PARA] is set to MIN N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
) Valid when [PARA]ChoiceRptUnitForBeE[/PARA] is set to MIN N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
) Valid when [PARA]ChoiceRptUnitForBeF[/PARA] is set to MIN N (no impact on the UE in idle mode)
RNC
This parameter is valid only
when
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
MIN,and it must satisfy the
following relationship:
[PARA]MinForDlBasicMeas[/P
ARA] x 60 <
[PARA]IntraFreqLdbPeriodTime
rLen[/PARA]/2;
[PARA]MinForDlBasicMeas[/P
ARA] x 60 <
[PARA]PucPeriodTimerLen[/PA
RA]/2;
[PARA]MinForDlBasicMeas[/P
ARA] x 60 <
[PARA]LdrPeriodTimerLen[/PA
RA]/2;
[PARA]MinForDlBasicMeas[/P
ARA] x 60000 <
[PARA]OlcPeriodTimerLen[/PA
RA]/2 .
This parameter is valid only
when
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
MIN,and it must satisfy the
following relationship:
[PARA]MinForDlBasicMeas[/P
ARA] x 60 <
[PARA]IntraFreqLdbPeriodTime
rLen[/PARA]/2;
[PARA]MinForDlBasicMeas[/P
ARA] x 60 <
N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForDlOlcMeas[/PARA] is set to MIN. N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForHsdpaRateMeas[/PARA] is set to MIN. N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForHsdpaPwrMeas[/PARA] is set to MIN. N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]ChoiceRprtUnitForHsupaRateMeas[/PARA] is set to MIN. N (No impact on the UE in idle mode)
RNC
This parameter is valid only
when
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] is set to
MIN,and it must satisfy the
following relationship:
[PARA]MinForUlBasicMeas[/P
ARA] x 60 <
[PARA]LdrPeriodTimerLen[/PA
RA]/2;
[PARA]MinForUlBasicMeas[/P
ARA] x 60000 <
[PARA]OlcPeriodTimerLen[/PA
RA]/2 .
This parameter is valid only
when
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] is set to
MIN,and it must satisfy the
following relationship:
[PARA]MinForUlBasicMeas[/P
ARA] x 60 <
[PARA]LdrPeriodTimerLen[/PA
RA]/2;
[PARA]MinForUlBasicMeas[/P
ARA] x 60000 <
[PARA]OlcPeriodTimerLen[/PA
RA]/2.
N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForUlOlcMeas[/PARA] is set to MIN. N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
) Valid when [PARA]ChoiceRptUnitForVpE[/PARA] is set to MIN N (no impact on the UE in idle mode)
IMA group None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]MinPCPICHPower[/PA
RA] <=
[PARA]MaxPCPICHPower[/PA
RA].
N (No impact on the UE in idle mode)
Ethernet port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or MBFD, the min interval of BFD packet receive should be set. Not involved
Ethernet port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or MBFD, the min interval of BFD packet send should be set. Not involved
NodeB None N (No impact on the UE in idle mode)
Transport channel None Y
RNC(SET
MBMSPERF,AD
D
IMSISNAMAP,A
DD
LASNAMAP,AD
D
CNOPERATOR)
Cell(ADD
GSMCELL)
None Not involved
RNC When [PARA]MOCNSupport[/PARA] in [MML]SET OPERATORSHARINGMODE[/MML] is set to YES, MocnControlSwitch needs to be set.Otherwise,it does not need. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Port None Y
RNC None N (No impact on the UE in idle mode)
Ethernet port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or ARP, the port work mode should be set. Not involved
SCTP None Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC When the value of [PARA]USEMP[/PARA] in [MML]ADD NODEBESN[/MML] is set to Enable, this parameter should be set. N (No impact on the UE in idle mode)
MLPPP Group,
MLPPP
Link(ADD
MPGRP)
RNC(ADD
MPLNK) None N (No impact on the UE in idle mode)
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. Not involved
MLPPP Group, MLPPP Link None N (No impact on the UE in idle mode)
Board None Not involved
RNC None N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell When the value of [PARA]MsgInd[/PARA] is set to ON, this parameter is valid. When [PARA]CBSwitch[/PARA] is set to ON in [MML]SET RNCCBPARA[/MML] and the CBS license is valid, the cell broadcast can be performed in a specified cell. This parameter specifies the content of broadcast messages. N (The UE in idle mode may receive the RNC built-in cell broadcast messages.)
Cell None N (The UE in idle mode may receive the RNC built-in cell broadcast messages.)
MSP protect group None Not involved
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]MtchMaxPwr[/PARA] >
[PARA]MtchRsvPwr[/PARA] .
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]MtchMaxSf[/PARA] >
[PARA]MtchRsvSf[/PARA] .
N (No impact on the UE in idle mode)
Cell(ADD
CELLMBMSFAC
H)
RNC(SET
MBMSFACH) The value of this parameter must fulfill the following condition: [PARA]MtchMinPerc0[/PARA] >= [PARA]MtchMinPerc15[/PARA]. Not involved
Cell(ADD
CELLMBMSFAC
H)
RNC(SET
MBMSFACH) The value of this parameter must fulfill the following condition: [PARA]MtchMinPerc0[/PARA] >= [PARA]MtchMinPerc15[/PARA]. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]MtchMaxPwr[/PARA] >
[PARA]MtchRsvPwr[/PARA].
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]MtchMaxSf[/PARA] >
[PARA]MtchRsvSf[/PARA] .
N (No impact on the UE in idle mode)
Cell None N (no impact on the UE in idle mode)
RNC
When the value of
[PARA]MTRLGY[/PARA] in
[MML]ADD GPS[/MML] is
selected as MET, the
ALTITUDE should be set;
When the value of
[PARA]MTRLGY[/PARA] in
[MML]ADD GPS[/MML] is
selected as IMP, the
ALTITUDEIMP should be set.
Not involved
Ethernet
port(SET
ETHPORT)
SCTP(ADD
SCTPLNK) None Y
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP) When the value of [PARA]PPPMUX[/PARA] in [MML]ADD MPGRP[/MML] is set to ENABLE, this parameter should be set. Y
Ethernet port When the value of [PARA]MODE[/PARA] in [MML]STR IPCHK[/MML] is set to REDPORT, the backup port mask should be set. Not involved
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC(ADD
OPC,ADD
N7DPC,ADD
M3RT,ADD
M3LNK,ADD
M3LKS,ADD
M3LE,ADD
MTP3LKS,ADD
MTP3RT)
Adjacent
Node(ADD
ADJNODE)
MTP3(ADD
MTP3LNK)
M3UA(ADD
M3DE)
None N (No impact on the UE in idle mode)
Transport channel
The value of this parameter must
be set to meet the following
conditions:
[PARA]NB01max[/PARA] >=
[PARA]NB01min[/PARA]. Y
Transport channel
The value of this parameter must
be set to meet the following
conditions:
[PARA]NB01max[/PARA] >=
[PARA]NB01min[/PARA]. Y
RNC None N (No impact on the UE in idle mode)
The SCTP links of all the subracks, which work as the server and whose upper layer is NBAP None Y
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]NBTRANTP[/PARA] in [MML]ADD NODEBIP[/MML] is set to IPTRANS_IP or ATMANDIPTRANS_IP, this parameter should be set. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]USENBLB2[/PARA] in [MML]ADD NODEBESN[/MML] is set to Enable, this parameter should be set. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell If the Downlink CAC algorithm switch select the equivalent user number algorithm,then Intra Frequency LDB Algorithm must be closed. N (No impact on the UE in idle mode)
Cell PUC should not be adopted if cell's inter-frequency measurement control information is configured not required, the latter is set by[MML]ADD CELLMEAS[/MML]or[MML]MOD UCELLMEAS[/MML],is configured as not required. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode)
RNC
None Not involved
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBMSPA
RA)
RNC(SET
RNCMBMSPAR
A,ADD
SAMBMSPARA)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter is valid only when [PARA]NonhcsInd[/PARA] is set to CONFIGURED. N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC None Y
RNC None Not involved
IP Route(ADD
IPRT)
RNC(ADD
IPRTBIND) For AEUa/AOUa/UOIa_ATM, next hop must be IPOA PVC peer address, for PEUa/POUa, next hop must be PPP link peer ip or MLPPP peer ip, for FG2a/GOUa, next hop must be in the same subnet with the port ip on the board, for UOIa_IP, next hop must be PPP peer ip. Not involved
Cell(ADD
CELLHCSHO)
RNC(SET
HCSHO)
The value of the parameter must
satisfy the function below:
[PARA]NFastSpdEst[/PARA]*[
PARA]TSlowSpdEst[/PARA]
>=
[PARA]NSlowSpdEst[/PARA]*[
PARA]TFastSpdEst[/PARA].
N (No impact on the UE in idle mode)
RNC This parameter depends on network planning. Not involved
Cell None N (No impact on the UE in idle mode)
RNC NMO needs to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to PS_DOMAIN; NMO does not need to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
NodeB None Not involved
NodeB None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
NodeB(ADD
NODEB)
Adjacent
Node(ADD
ADJNODE)
Cell(SET
MRSCOPECTRL
)
RNC(STR
NODEBDETECT
,ADD
NODEBESN,AD
D NODEBIP)
When the value of
[PARA]NODET[/PARA] in
[MML]ADD
ADJNODE[/MML] is set to
IUB, this parameter is valid.
When the value of
[PARA]SelectType[/PARA] in
[MML]STR
NODEBDETECT[/MML] is set
to SINGLE, this parameter is
valid.
Not involved
NodeB None Not involved
NodeB None N (No impact on the UE in idle mode)
NodeB(STR
NODEBBWRPT,
ADD
NODEBOLC,AD
D IPDL,ADD
NODEBALGOP
ARA,ADD
NODEBLDR,AD
D NODEB)
(ADD CCP,ADD
NCP,ADD
LOCELL,ADD
NBNODESYNC
MONPARA)
Cell(ADD
QUICKCELLSET
UP,ADD
CELLSETUP)
The value of this parameter is dependent on the value of [PARA]NodeBName[/PARA] in [MML]ADD NODEB[/MML]. Not involved
NodeB None N (No impact on the UE in idle mode)
NodeB None Not involved
NodeB None Not involved
NodeB None Not involved
NodeB None Not involved
NodeB None Not involved
NodeB None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Adjacent Node None Not involved
NodeB None N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
This paramter is valid only when
[PARA]NPrioFlag[/PARA] is
set to TRUE.
This paramter is valid only when
[PARA]NPrioFlag[/PARA] is
set to TRUE; Also the value of
this parameter must be different
to the others.
N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]NPrioFlag[/PARA] is set to TRUE. N (No impact on the UE in idle mode)
Cell
None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBMSPA
RA)
RNC(SET
RNCMBMSPAR
A,ADD
SAMBMSPARA)
None N (No impact on the UE in idle mode)
RNC None Not involved
RNC
None Not involved
RNC None Y
Services carried
on the network
element with the
specific ATM
address.(ADD
AAL2RT)
NodeB(ADD
NODEB)
1. If the original ATM address
of the NodeB is configured with
the route through [MML]ADD
AAL2RT[/MML], the parameter
cannot be modified.
2. If the original ATM address of
the NodeB is configured with the
route in the AAL2RT table, the
parameter cannot be modified.
Not involved
Cell(ADD
CELLHCSHO)
RNC(SET
HCSHO)
The value of the parameter must
satisfy the function below:
[PARA]NFastSpdEst[/PARA]*[
PARA]TSlowSpdEst[/PARA]
>=
[PARA]NSlowSpdEst[/PARA]*[
PARA]TFastSpdEst[/PARA].
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
When
[PARA]DsacAutoSwitch[/PARA
] is set to ON,the parameter need
configure;else,need not
configure.
If [MML]ADD
CELLDSACMANUALPARA[/
MML][PARA]RestrictionType[/
PARA] value is
RestrictionFixed,need set
AcRestriction value;when
[MML]ADD
CELLDSACMANUALPARA[/
MML][PARA]RestrictionType[/
PARA] value is
RestrictionFlexible,no need set
AcRestriction value.
N (No impact on the UE in idle mode)
OMCH(ADD
PPPLNK)
Ethernet
port(SET
ETHPORT)
MLPPP Group,
PPP Link(ADD
MPGRP)
LGC port(ADD
IPLOGICPORT)
None Not involved
Port Queue [PARA]OAMFLOWDSCP[/PARA] can not be the same with any DSCP of IPPATH, or any DSCP used in [MML]ADD TRMMAP[/MML]. N (No impact on the UE in idle mode)
Port Queue None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
When
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] and
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] are set to
MIN,the value of this parameter
must satisfy the following
relationship:
[PARA]OlcPeriodTimerLen[/PA
RA] > 2 x 60 x 1000 x
[PARA]MinForUlBasicMeas[/P
ARA];
[PARA]OlcPeriodTimerLen[/PA
RA] > 2 x 60 x 1000 x
[PARA]MinForDlBasicMeas[/P
ARA];
When
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] and
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] are set to
TEN_MSEC,the value of this
parameter must satisfy the
following relationship:
[PARA]OlcPeriodTimerLen[/PA
RA] > 2 x
[PARA]TenMsecForUlBasicMe
as[/PARA];
[PARA]OlcPeriodTimerLen[/PA
RA] > 2 x
[PARA]TenMsecForDlBasicMe
as[/PARA].
N (No impact on the UE in idle mode)
RNC None Not involved
RAB None N (No impact on the UE in idle mode)
Optical Port None Not involved
RNC None N (no impact on the UE in idle mode)
Corresponding optical port When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to AOUa or POUa, and the [PARA]PS[/PARA] in [MML]SET OPT[/MML] is set to ALL, the optical interface standard should be set. Not involved
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_ANTENNA N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
AAL2 Path None N (No impact on the UE in idle mode)
Services carried on the network element with the specific ATM address. None N (no impact on the UE in connected mode and the UE in idle mode)
IP Path None N (no impact on the UE in connected mode)
AAL2 Path(LOP
VCL,ADD
AAL2PATH)

AAL2PATH(AC
T VCLCC)
When the value of
[PARA]LNKT[/PARA] in
[MML]ACT VCLCC[/MML] is
set to AAL2PATH, the AAL2
path ID should be set.
When the value of
[PARA]LNKT[/PARA] in
[MML]LOP VCL[/MML] is set
to AAL2PATH, the value of
[PARA]PATHID[/PARA]
should be set.
Not involved
IP Path(ADD
IPPATHBIND,A
DD IPPATH)
IP path(ACT
IPPM) None Not involved
IP Path When the value of [PARA]ANI[/PARA] in [MML]ADD IPPATH[/MML] is set to IUPS,the value of [PARA]PATHT[/PARA] must be set to RT/NRT/QOS. Not involved
RNC When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] DPUb, the value of [PARA]PATTYPE[/PARA] should be set. N (No impact on the UE in idle mode)
Transport channel None N (Impact on page message receiving of UEs in idle mode)
Cell
1. The value of this parameter
must satisfy the following
relationship:
[PARA]MinPCPICHPower[/PA
RA] <=
[PARA]PCPICHPower[/PARA]
<=
[PARA]MaxPCPICHPower[/PA
RA]
2. To modify the PCPICH power,
the intra-frequency load balance
algorithm of the cell should be
disabled. You can use
[MML]LST
CELLALGOSWITCH[/MML]
to query the switch and use
[MML]MOD
CELLALGOSWITCH[/MML]
to modify the switch.
N (Impact on pilot message receiving of UEs in idle mode)
Cell None N (No impact on the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index
1.When the value of
[PARA]ST[/PARA] in
[MML]ADD ATMTRF[/MML]
is set to CBR or RTVBR or
NRTVBR and
[PARA]UT[/PARA] is selected,
this parameter should be set.
2.[PARA]PCR[/PARA] must be
larger than
[PARA]SCR[/PARA].
Not involved
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
Ethernet port None Not involved
Cell
None N (No impact on the UE in idle mode)
RNC The parameter must not be the same as any IP address that has been configured in the RNC. Not involved
MLPPP Group, MLPPP Link None N (No impact on the UE in idle mode)
Ethernet port None Not involved
SCTP None Y
SCTP None Y
RNC(ADD
IPOAPVC)
IPOA(LOP VCL)
Global(ACT
VCLCC)
When the value of
[PARA]LNKT[/PARA] in
[MML]LOP VCL[/MML] is set
to IPOAPVC,the value of
[PARA]PEERIPADDR[/PARA]
should be set.
When the value of
[PARA]LNKT[/PARA] in
[MML]ACT VCLCC[/MML] is
set to IPOAPVC, the peer IP
address should be set.
Not involved
IP Path [PARA]IPADDR[/PARA] and [PARA]PEERIPADDR[/PARA] in [MML]ADD IPPATH[/MML] must be at one network segment;([PARA]IPADDR[/PARA],[PARA]PEERIPADDR[/PARA],[PARA]PEERMASK[/PARA] in [MML]ADD IPPATH[/MML]) conflicts with other IPPATH whose type is IUPS. Not involved
Cell
None N (No impact on the UE in idle mode)
IP Path ([PARA]IPADDR[/PARA],[PARA]PEERIPADDR[/PARA],[PARA]PEERMASK[/PARA] in [MML]ADD IPPATH[/MML]) conflicts with other IP Path whose type is IUPS. Not involved
NodeB None N (No impact on the UE in idle mode)
SCTP None Y
NodeB None N (No impact on the UE in idle mode)
IPoA PVC Only when [PARA]PEERT[/PARA] is selected to be IUB, the IPOAPVC can be added to a virtual port. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHON
COV,SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
IP Path When the value of [PARA]PATHCHK[/PARA] in [MML]ADD IPPATH[/MML] is set to ENABLED, this parameter is valid. N (no impact on services when the Ping detection succeeds)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHONCOV)
RNC(SET
INTERFREQHO
NCOV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO) None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO) None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO) None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Physical channel This parameter is valid when [PARA]AccessServiceClass[/PARA] is set to ASC2,ASC3,ASC4,ASC5,ASC6 or ASC7. N (Impact on random access for UEs in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Link,
PPP Link(ADD
MPLNK) None Y
IP path When the value of [PARA]ISQOSPATH[/PARA] in [MML]ACT IPPM[/MML] is set to YES, this parameter should be set. Not involved
Board 1.The phb of the traffic's transmission path is determined like this: if the phb of this transmission path is QOS, use the traffic's phb from TRMMAP; if the phb of this transmission path is BE,AF11,AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,AF41,AF42,AF43,EF, use the phb of transmission path. Not involved
Physical
channel(ADD
SSCH,ADD
PSCH,ADD
PRACHBASIC,A
DD
PRACHTFC,AD
D FACH,ADD
PICH,ADD
PRACHASC,AD
D
PRACHSLOTFO
RMAT,ADD
PCH,ADD
SCCPCHTFC,AD
D PCPICH,ADD
RACH,ADD
AICH,ADD
PCCPCH,ADD
SCCPCHBASIC)
Cell(ADD
PRACHACTOAS
CMAP)
None Not involved
Cell None Not involved
Physical channel None Not involved
Physical channel None Not involved
Cell None N (Impact on page message receiving of UEs in idle mode)
Ethernet port None Not involved
RNC None Y
RNC None Y
Ethernet port None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
RNC
The value of this parameter must
satisfy the following relationship:
[PARA]PlmnValTagMax[/PAR
A] >
[PARA]PlmnValTagMin[/PAR
A].
Not involved
RNC
The value of this parameter must
satisfy the following relationship:
[PARA]PlmnValTagMax[/PAR
A] >
[PARA]PlmnValTagMin[/PAR
A].
Not involved
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
IP path If the Ip path is configured on logic port, this parameter must be less than [PARA]PLPRD[/PARA] and [PARA]LATPRD[/PARA] in command [MML]ADD IPLOGICPORT[/MML]. N (No impact on the UE in idle mode)
Ethernet
port(ADD
ETHIP,ADD
ETHREDPORT,
ACT
ETHPORT,SET
ETHPORT)
Port(SET
MSP,SET
MSPCMD)
RNC(SWP
ETHPORT,CLR
MSPREP)
Loopback optical
port(SET
OPTLOP)
Optical port(ACT
MSP)
Corresponding
optical port(SET
OPT)
Optical Port(SET
COPTLNK)
LGC port(ADD
IPLOGICPORT)
NodeB(ADD
CCP)
When the value of
[PARA]PS[/PARA] in
[MML]SET OPT[/MML] is
SINGLE, the port number should
be set.
When the value of
[PARA]LS[/PARA] in
[MML]SET COPTLNK[/MML]
is set to PORT or SINGLE, the
parameter [PARA]PN[/PARA]
should be set.
When the value of
[PARA]CHKTYPE[/PARA] in
[MML]STR IPCHK[/MML] is
set to SBFD or ARP, the
Ethernet port number should be
set.
There cannot be IP address or
port controller configured on the
port and the backup port .
If the interface board is GOUa,
the parameter
[PARA]PN[/PARA] can only be
0 or 1.
For FG2a board, if the type of
port 0 is GE, the PN cannot be
1~3; if the type of port 4 is GE,
the PN cannot be 5~7.
Not involved
RNC None Not involved
Ethernet port None Not involved
Ethernet port None Not involved
RNC None Y
Ethernet port When the value of [PARA]CHKTYPE[/PARA] in [MML]STR IPCHK[/MML] is set to SBFD or ARP, the Ethernet port number should be set. Not involved
SRB None Not involved
RNC None Not involved
RNC None Not involved
RNC
The value of this parameter must
be set to meet the following
conditions:
100 x
[PARA]MaxQueueTimeLen[/PA
RA] >
[PARA]PollTimerLen[/PARA].
N (No impact on the UE in idle mode)
SAAL None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
Physical channel None Not involved
Physical channel None N (Impact on random access for UEs in idle mode)
RNC When the value of [PARA]USEPPP[/PARA] in [MML]ADD NODEBESN[/MML] is set to Enable, this parameter should be set. N (No impact on the UE in idle mode)
LGC port None Not involved
PPP Link(ADD
PPPLNK)
MLPPP
Link(ADD
MPLNK) The parameter [PARA]PPPLNKN[/PARA] of PPP link and MLPPP link can not be the same. Not involved
PPP Link(ADD
PPPLNK)
MLPPP Group,
PPP Link(ADD
MPGRP) None Not involved
RNC When the value of [PARA]PORTPROTYPE[/PARA] in [MML]ADD PORTFLOWCTRLPARA[/MML] is set to IP, this parameter should be set. N (No impact on the UE in idle mode)
Physical channel None Not involved
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
Physical channel None N (Impact on random access for UEs in idle mode)
Physical channel None N (Impact on random access for UEs in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None Not involved
IP Route None Not involved
MTP3(ADD
MTP3LNK)
Priority for the
link(ADD
M3LNK) None N (No impact on the UE in idle mode)
RNC(ADD
MTP3RT)
The route to the
specific M3DE
decides the
sequence.(ADD
M3RT)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC
1. For the detection timers that
do not need to configure
background services, the related
T1 and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure background
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
conversational services, the
related T1 and T2 must be 0 at
the same time.
2. For the detection timers that
need to configure conversational
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure IMS
signaling services, the related T1
and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure IMS signaling
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
interactive services, the related
T1 and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure interactive
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
streaming services, the related
T1 and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure streaming
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
Corresponding optical port When the value of [PARA]BT[/PARA] in [MML]SET OPT[/MML] is set to AOUa or POUa, the port select should be set. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Physical channel None N (Impact on network searching of UEs in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell
None Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(SET
INTERRATHON
COV)
This parameter is valid when
[PARA]NcovHoOn2GldInd[/PA
RA] in [MML]SET
INTERRATHONCOV[/MML]
is set to ON.
This parameter is valid when
[PARA]NcovHoOn2GldInd[/PA
RA] is set to ON.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
background services, the related
T1 and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure background
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
conversational services, the
related T1 and T2 must be 0 at
the same time.
2. For the detection timers that
need to configure conversational
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure IMS
signaling services, the related T1
and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure IMS signaling
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
interactive services, the related
T1 and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure interactive
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC
1. For the detection timers that
do not need to configure
streaming services, the related
T1 and T2 must be 0 at the same
time.
2. For the detection timers that
need to configure streaming
services, the related T1 and T2
must not be 0 at the same time.
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC PsInfoUpdTmr needs to be set when [PARA]PsInfoUpdFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to ON; PsInfoUpdTmr does not need to be set when [PARA]PsInfoUpdFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to OFF. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC PSNRILength needs to be set when [PARA]PsIuFlexFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to ON; PSNRILength does not need to be set when [PARA]PsIuFlexFlag[/PARA] in [MML]SET IUFLEX[/MML] is set to OFF. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
When [PARA]DsacAutoSwitch[/PARA] is set to ON,the parameter need configure;else,need not configure. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC PS_RAB_DOWNSIZING_SWITCH is valid when DRA_DCCC_SWITCH is set to ON. N (no impact on the UE in idle mode)
RNC None Not involved
SRB None Not involved
RNC When the value of [PARA]USEFE[/PARA] in [MML]ADD NODEBESN[/MML] is set to Enable, this parameter should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]USEFE[/PARA] in [MML]ADD NODEBESN[/MML] is set to Enable, this parameter should be set. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port When the value of [PARA]BRDTYPE[/PARA] in [MML]SET ETHPORT[/MML] is set to FG2a, the port type should be set. N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC
When
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
MIN,the value of this parameter
must satisfy the following
relationship:
[PARA]PucPeriodTimerLen[/PA
RA] > 2 x 60 x
[PARA]MinForDlBasicMeas[/P
ARA];
When
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
TEN_MSEC,the value of this
parameter must satisfy the
following relationship:
[PARA]PucPeriodTimerLen[/PA
RA] x 1000 > 2 x
[PARA]TenMsecForDlBasicMe
as[/PARA].
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Port Queue From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PARA]Q1MINDSCP[/PARA] > [PARA]Q2MINDSCP[/PARA] > [PARA]Q3MINDSCP[/PARA] > [PARA]Q4MINDSCP[/PARA]. N (No impact on the UE in idle mode)
Port Queue From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PARA]Q1MINDSCP[/PARA] > [PARA]Q2MINDSCP[/PARA] > [PARA]Q3MINDSCP[/PARA] > [PARA]Q4MINDSCP[/PARA]. N (No impact on the UE in idle mode)
Port Queue From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PARA]Q1MINDSCP[/PARA] > [PARA]Q2MINDSCP[/PARA] > [PARA]Q3MINDSCP[/PARA] > [PARA]Q4MINDSCP[/PARA]. N (No impact on the UE in idle mode)
Port Queue From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PARA]Q1MINDSCP[/PARA] > [PARA]Q2MINDSCP[/PARA] > [PARA]Q3MINDSCP[/PARA] > [PARA]Q4MINDSCP[/PARA]. N (No impact on the UE in idle mode)
Port Queue From [PARA]Q0MINDSCP[/PARA] to [PARA]Q4MINDSCP[/PARA] must obey the following rules: [PARA]Q0MINDSCP[/PARA] > [PARA]Q1MINDSCP[/PARA] > [PARA]Q2MINDSCP[/PARA] > [PARA]Q3MINDSCP[/PARA] > [PARA]Q4MINDSCP[/PARA]. N (No impact on the UE in idle mode)
Adjacent Node When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, IUR, or IUCS, and the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to UNI_AAL2SWITCH or NNI_AAL2SWITCH, this parameter is valid. N (No impact on the UE in idle mode)
Cell(ADD
GSMCELL,ADD
CELLHCS)
RNC(ADD
NRNCCELL)
This parameter is valid only
when
[PARA]UseOfHcs[/PARA] is
set to USED.
This paramter is valid only when
[PARA]UseOfHcs[/PARA] is
set to USED.
This parameter is valid only
when
[PARA]UseOfHcs[/PARA] is
set to TRUE.
N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to choose to the GSM neighbouring cell in cell reselection process. On the other hand. the smaller the value is, the higher the possibility for the UE to choose the GSM neighbouring cell.)
Cell(ADD
CELLSELRESEL
)
RNC(ADD
NRNCCELL)
This parameter is valid only when [PARA]QqualminInd[/PARA] is set to TRUE. N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC None N (For the UE in idle mode, the parameter will impact the UE whether it can camp on the cell.)
Cell None N(For the UE in idle mode, the larger the value of this parameter is, the harder the UE to reselect to this cell based on HCS algorithm. On the other hand. the smaller the value is, the easier the UE to reselect to this cell. But if the value is to small, the UE may not receive the systerm information on PCCPCH channel correctly after cell reselection.)
Cell(ADD
CELLSELRESEL
)
RNC(ADD
NRNCCELL)
This parameter is valid only when [PARA]QrxlevminInd[/PARA] is set to TRUE. N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell(ADD
CELLSELRESEL
)
RNC(ADD
NRNCCELL)
This parameter is valid only when [PARA]QrxlevminInd[/PARA] is set to TRUE. N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC None N (For the UE in idle mode, the parameter will impact the UE whether it can camp on the cell.)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RAB(ADD
TYPRABOLPC)
(ADD
TYPRABBASIC,
ADD
TYPRABHSPA,
ADD
TYPRABRLC,A
DD
TYPRABDCCC
MC)
RNC(ADD
TYPRABQUALI
TYMEAS)
None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC(ADD
NRNCCELL,AD
D
QUICKCELLSET
UP,ADD
CELLSETUP,AD
D RAC)
Cell(ADD
GSMCELL)
This paramter is valid only when [PARA]CfgRacInd[/PARA] is set to REQUIRE. Not involved
Physical channel None N (Impact on random access for UEs in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Transport channel
None Not involved
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None Not involved
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
RNC The value of this parameter must be larger than the value of the [PARA]UpLimitCountingTime[/PARA] parameter under the [MML]SET RNCMBMSPARA[/MML] command. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
LGC port
1.When the value of
[PARA]BWADJ[/PARA] in
[MML]ADD
IPLOGICPORT[/MML] is set to
ON, this parameter should be set.
2.[PARA]RECOVERTHD[/PAR
A] must be larger than
[PARA]RPTTHD[/PARA].
N (No impact on the UE in idle mode)
Board None Not involved
RNC(SET
REDIRECTION,
SET DRD)
Cell(ADD
CELLREDIRECT
ION,ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command.
This parameter is valid when
[PARA]RedirBandInd[/PARA]
is not set to BandIndNotUsed.
1. This parameter is valid when
[PARA]RedirSwitch[/PARA] is
set to
ONLY_TO_INTER_FREQUEN
CY or
ONLY_TO_INTER_RAT.
2. If the value of this parameter
is set in both the [MML]SET
REDIRECTION[/MML] and
[MML]ADD
CELLREDIRECTION[/MML]
commands, the value set in the
[MML]ADD
CELLREDIRECTION[/MML]
command prevails. N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION)
Cell(ADD
CELLREDIRECT
ION)
This parameter is valid when
[PARA]RedirSwitch[/PARA] is
set to
ONLY_TO_INTER_FREQUEN
CY or
ONLY_TO_INTER_RAT.
1. This parameter is valid when
[PARA]RedirSwitch[/PARA] is
set to
ONLY_TO_INTER_FREQUEN
CY or
ONLY_TO_INTER_RAT.
2. If the value of this parameter
is set in both the [MML]SET
REDIRECTION[/MML] and
[MML]ADD
CELLREDIRECTION[/MML]
commands, the value set in the
[MML]ADD
CELLREDIRECTION[/MML]
N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION)
Cell(ADD
CELLREDIRECT
ION)
This parameter is valid when
[PARA]RedirSwitch[/PARA] is
set to
ONLY_TO_INTER_FREQUEN
CY or
ONLY_TO_INTER_RAT.
1. This parameter is valid when
[PARA]RedirSwitch[/PARA] is
set to
ONLY_TO_INTER_FREQUEN
CY or
ONLY_TO_INTER_RAT.
2. If the value of this parameter
is set in both the [MML]SET
REDIRECTION[/MML] and
[MML]ADD
CELLREDIRECTION[/MML]
commands, the value set in the
[MML]ADD
CELLREDIRECTION[/MML]
N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION)
Cell(ADD
CELLREDIRECT
ION) None N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION,
SET DRD)
Cell(ADD
CELLREDIRECT
ION,ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command;
The value range of this
parameter depends on the setting
of the
[PARA]ReDirBandInd[/PARA]
parameter, as shown below:
Band1
Common frequencies: [10562-
10838]
Special frequencies: none
Band2
Common frequencies: [9662-
9938]
Special frequencies: {412, 437,
462, 487, 512, 537, 562, 587,
612, 637, 662, 687}
Band3
Common frequencies: [1162-
1513]
Special frequencies: none
Band4
Common frequencies: [1537-
1738]
Special frequencies: {1887,
1912, 1937, 1962, 1987, 2012,
N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION,
SET DRD)
Cell(ADD
CELLREDIRECT
ION,ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command; This
parameter is required only when
the
[PARA]ReDirUARFCNUplinkI
nd[/PARA] parameter is set to
TRUE;
The value range of this
parameter depends on the setting
of the
[PARA]ReDirBandInd[/PARA]
parameter, as shown below:
Band1:
Common frequencies: [9612-
9888]
Special frequencies: none
Band2:
Common frequencies: [9262-
9538]
Special frequencies: {12, 37, 62,
87, 112, 137, 162, 187, 212, 237,
262, 287}
Band3:
Common frequencies: [937-
1288]
Special frequencies: none
N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION,
SET DRD)
Cell(ADD
CELLREDIRECT
ION,ADD
CELLDRD)
If this parameter is set through
both the [MML]ADD
CELLDRD[/MML] and
[MML]SET DRD[/MML]
commands, the parameter set
through the [MML]ADD
CELLDRD[/MML] command
takes precedence over that set
through the [MML]SET
DRD[/MML] command.
This parameter is valid when
[PARA]RedirBandInd[/PARA]
is not set to BandIndNotUsed.
1. This parameter is valid when
[PARA]RedirBandInd[/PARA]
is not set to BandIndNotUsed.
3. If the value of this parameter
is set in both the [MML]SET
REDIRECTION[/MML] and
[MML]ADD
CELLREDIRECTION[/MML]
commands, the value set in the
[MML]ADD
CELLREDIRECTION[/MML]
command prevails.
N (No impact on the UE in idle mode)
board
When the value of
[PARA]BT[/PARA] in
[MML]SET CLK[/MML] is set
to AEUa/PEUa, the value range
of
[PARA]REF2MCLKSRC[/PAR
A] is 0 to 31.
When the value of
[PARA]BT[/PARA] in
[MML]SET CLK[/MML] is set
to AOUa/POUa, the value range
of
[PARA]REF2MCLKSRC[/PAR
A] is 0 to 1.
When the value of
[PARA]BT[/PARA] in
[MML]SET CLK[/MML] is set
to UOIa, the value range of
[PARA]REF2MCLKSRC[/PAR
A] is 0 to 3.
Y
board
When the value of
[PARA]BT[/PARA] in
[MML]SET CLK[/MML] is set
to AEUa/PEUa, the value range
of
[PARA]REF2MCLKSRC[/PAR
A] is 0 to 31.
When the value of
[PARA]BT[/PARA] in
[MML]SET CLK[/MML] is set
to AOUa/POUa, the value range
of
[PARA]REF2MCLKSRC[/PAR
A] is 0 to 1.
When the value of
[PARA]BT[/PARA] in
[MML]SET CLK[/MML] is set
to UOIa, the value range of
[PARA]REF2MCLKSRC[/PAR
A] is 0 to 3.
N (No impact on the UE in idle mode)
board None Y
board None Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
IP Route(ADD
IPRT)

SAALLNK/AAL
3PATH/IPOAPV
C/VPCLCX using
this ATM traffic
record
index(ADD
ATMTRF)
None Not involved
RNC
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO) None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO) None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO) None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
PPP Link(ADD
PPPLNK)
MLPPP Link,
PPP Link(ADD
MPLNK) None Not involved
RNC None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
Transport channel
None Not involved
Cell The value of this parameter must not be smaller than [PARA]RlMinDlPwr[/PARA]. N (No impact on the UE in idle mode)
Cell The value of this parameter must not be larger than [PARA]RlMaxDlPwr[/PARA]. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC(ADD
GPS,ADD
RNCBASIC,RST
IUR,ADD
GSMNCELL,AD
D
INTERFREQNC
ELL,ADD
INTRAFREQNC
ELL,ADD
CELLINTRAFRE
QHO)
Cell(ADD
SMLCCELL)
(RST RNC)
None Not involved
Subsystem None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
LGC port
1.When the value of
[PARA]BWADJ[/PARA] in
[MML]ADD
IPLOGICPORT[/MML] is set to
ON, this parameter should be set.
2.[PARA]RECOVERTHD[/PAR
A] must be larger than
[PARA]RPTTHD[/PARA].
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
AAL2 Path When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, or NCOPT, this parameter is valid. Y
AAL2 Path When the value of [PARA]RSCGRPFLAG[/PARA] in [MML]ADD AAL2PATH[/MML] is set to YES, this parameter is valid; the type of rscgrp must be ATM. Y
IP Path When the value of [PARA]CARRYFLAG[/PARA] in [MML]ADD IPPATH[/MML] is set to RSCGRP, this parameter is valid;the type of rscgrp must be IP. Y
NodeB None N (No impact on the UE in idle mode)
LGC port(ADD
ATMLOGICPOR
T,ADD
IPLOGICPORT)
Transmission
resource
group(ADD
RSCGRP)
When [PARA]ISFIRSTCLASSE[/PARA] in [MML]ADD RSCGRP[/MML] is set to YES, this parameter is valid. Not involved
RNC None Not involved
SAAL None N (No impact on the UE in idle mode)
RNC None Not involved
RNC When the value of [PARA]SPCBITS[/PARA] is set to BIT14 or BIT24, this parameter is valid. Y
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLALGOSWI
TCH)
NodeB(ADD
NODEBALGOP
ARA)
RNC(SET
CACALGOSWIT
CH)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLALGOSWI
TCH)
NodeB(ADD
NODEBALGOP
ARA)
RNC(SET
CACALGOSWIT
CH)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLALGOSWI
TCH)
NodeB(ADD
NODEBALGOP
ARA)
RNC(SET
CACALGOSWIT
CH)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Port None Y
RNC
None Y
RNC When [PARA]RTCPSwitch[/PARA] in [MML]ADD CNNODE[/MML] is set to ON, RTCPBWRatio needs to be set. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC When [PARA]TnlBearerType[/PARA] in [MML]ADD CNNODE[/MML] is set to IP_TRANS, RTCPSwitch needs to be set. N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC This parameter is valid when DRA_PS_NON_BE_STATE_TRANS_SWITCH and DRA_HSDPA_STATE_TRANS_SWITCH in [MML]SET CORRMALGOSWITCH[/MML] are set to ON. N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtF2DHTvmThd[/PAR
A];
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtEFach2DHTvmThd[/
PARA];
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtEFach2CpcTvmThd[/
PARA];
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtF2CpcTvmThd[/PAR
A].
N (no impact on the UE in idle mode)
RNC This parameter is valid when DRA_PS_NON_BE_STATE_TRANS_SWITCH and DRA_HSDPA_STATE_TRANS_SWITCH in [MML]SET CORRMALGOSWITCH[/MML] are set to ON. N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtEFach2CpcTvmThd[/
PARA]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtEFach2DHTvmThd[/
PARA]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtF2CpcTvmThd[/PAR
A]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]RtDH2FTvmThd[/PAR
A] <
[PARA]RtF2DHTvmThd[/PAR
A]. N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
SCTP None N (No impact on the UE in idle mode)
SCTP None N (No impact on the UE in idle mode)
SCTP The value to be set should be larger than the value of [PARA]RTOMIN[/PARA] in [MML]ADD SCTPLNK[/MML] but smaller than the value of [PARA]RTOMAX[/PARA]. N (No impact on the UE in idle mode)
SCTP The value to be set should be larger than the value of [PARA]RTOMIN[/PARA] in [MML]ADD SCTPLNK[/MML]. N (No impact on the UE in idle mode)
SCTP The value to be set should be smaller than the value of [PARA]RTOMAX[/PARA] in [MML]ADD SCTPLNK[/MML]. N (No impact on the UE in idle mode)
Services carried on the network element with the specific ATM address. None Not involved
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, this parameter should be set. N (No impact on the UE in idle mode)
LGC port None Not involved
IP Path None N (No impact on the UE in idle mode)
Transmission resource group When [PARA]GRPT[/PARA] in [MML]ADD RSCGRP[/MML] is set to ATM or [PARA]BWMODE[/PARA] is set to FULL_DUPLEX, this parameter is valid;The sum of [PARA]TxBw[/PARA] and [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]TxBw[/PARA] and [PARA]AllBw[/PARA] in [MML]ADD RSCGRP[/MML]of lower class RSCGRP;The [PARA]TxBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]TxBw[/PARA] in [MML]ADD RSCGRP[/MML] of lower class RSCGRP, and the [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of lower class RSCGRP. N (No impact on the UE in idle mode)
SAAL(ADD
SAALLNK)
AAL2 Path(ADD
AAL2PATH)
RNC(ADD
VPCLCX)
IPoA PVC(ADD
IPOAPVC)
When the value of
[PARA]CARRYT[/PARA] is set
to IMA, UNI, FRAATM,
NCOPT, or ATMLGCPORT,
this parameter is valid.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
UNI, IMA, FRAATM, NCOPT,
or ATM logic port, this
parameter is valid.
1.When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to UNI, IMA, FRAATM,
NCOPT, or ATMLGCPORT,
this parameter is required.
2.When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
UNI, IMA, FRAATM, NCOPT,
or ATMLGCPORT, this
parameter is required.
Y
RNC
The value of the parameter must
satisfy the function below:
[PARA]RxTxtoTrig6F[/PARA] -
[PARA]RxTxtoTrig6G[/PARA]
>= 256.
N (No impact on the UE in idle mode)
RNC
The value of the parameter must
satisfy the function below:
[PARA]RxTxtoTrig6F[/PARA] -
[PARA]RxTxtoTrig6G[/PARA]
>= 256. N (No impact on the UE in idle mode)
SAAL When [PARA]CARRYLNKT[/PARA] is SAAL or SAAL-SCTP, this parameter is valid. Not involved
SAAL When[PARA]CARRYLNKT[/PARA] is SAAL or SAAL-SCTP, this parameter is valid. Not involved
SAAL
When the value of
[PARA]LNKT[/PARA] in
[MML]ACT VCLCC[/MML] is
set to SAALLNK, the SAAL link
number should be set.
When the value of
[PARA]LNKT[/PARA] in
[MML]LOP VCL[/MML] is set
to SAALLNK, the value of
[PARA]SAALLNKN[/PARA]
should be set.
Not involved
Adjacent
Node(ADD
ADJNODE)
MTP3(ADD
MTP3LNK) When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, and the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to UNI_AAL2SWITCH, this parameter is valid. Y
SAAL None Not involved
MTP3B None N (No impact on the UE in idle mode)
RNC
The value of this parameter is
dependent on the value of
[PARA]SAC[/PARA] in
[MML]ADD SAC[/MML];
This service area is not
configured as a classified zone.
Not involved
NodeB None N (No impact on the UE in idle mode)
Physical channel None Not involved
Cell None N (No impact on the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index
1.When the value of
[PARA]ST[/PARA] in
[MML]ADD ATMTRF[/MML]
is set to RTVBR or NRTVBR
and [PARA]UT[/PARA] is
selected, this parameter should
be set.
2.[PARA]SCR[/PARA] must be
smaller than
[PARA]PCR[/PARA].
Not involved
Physical channel None Not involved
E1T1 link(SET
E1T1)
Corresponding
optical port(SET
OPT)
When the value of
[PARA]BT[/PARA] in
[MML]SET E1T1[/MML] is set
to AEUa or AOUa, the value of
[PARA]SCRAMBLESW[/PAR
A] can be set.
When the value of
[PARA]BT[/PARA] in
[MML]SET OPT[/MML] is set
to UOIa and the logic function
type is selected,the scramble
switch should be set.
Not involved
SCTP(ADD
NCP,ADD
CCP,ADD
SCTPLNK)
RNC(ADD
M3LNK)
The parameter
[PARA]SCTPLNKN[/PARA] in
[MML]ADD SCTPLNK[/MML]
When
[PARA]CARRYLNKT[/PARA]
is SCTP or SAAL-SCTP, this
parameter is valid.
Not involved
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] in [MML]SET TZ[/MML] is set to DATE or DATEWEEK, the start date should be set. Y
Port None Not involved
Port None Not involved
NodeB None N (no impact on the UE in idle mode)
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
RNC None Not involved
PPP Link None Not involved
Cell(ADD
CELLMBMSFAC
H,ADD
CELLMBMSSCC
PCH)
RNC(SET
MTCH,SET
MBMSFACH,SE
T
MBMSSCCPCH)
None Not involved
RNC(SET DRD)
Cell(ADD
CELLDRD)
If this parameter is set through both the [MML]ADD CELLDRD[/MML] and [MML]SET DRD[/MML] commands, the parameter set through the [MML]ADD CELLDRD[/MML] command takes precedence over that set through the [MML]SET DRD[/MML] command. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBMSFAC
H,ADD
CELLMBMSSCC
PCH)
RNC(SET
MTCH,SET
MBMSFACH,SE
T
MBMSSCCPCH)
None Not involved
Adjacent Node When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUPS, this parameter is valid. Not involved
RNC
The value of this parameter must
satisfy the following relationship:
[PARA]MaxCAPSLowLoad[/P
ARA] >
[PARA]MaxCAPSMidLoad[/PA
RA] >
[PARA]SharingOutCAPSMidLo
ad[/PARA].
N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Cell This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA] parameter is set to NOT_USED. N (No impact on the UE in idle mode)
RAB This parameter is valid when the SERVICE_HO_BASED_ON_RNC_SWITCH under the [PARA]HoSwitch[/PARA] parameter is set to on through the [MML]SET CORRMALGOWITCH[/MML] command. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
SMLC,SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell
None N(For the UE in idle mode, the value of this parameter decides whether the UE can receive the information of this neighbouring cell in SIB11.)
Cell
None N(For the UE in idle mode, the value of this parameter decides whether the UE can receive the information of this neighbouring cell in SIB12.)
Cell None N (No impact on the UE in idle mode)
RNC This parameter cannot be set to FACH only when the [PARA]RrcCause[/PARA] parameter is set to EMERGCALLEST or MBMSCALLEST. N (No impact on the UE in idle mode)
RNC(ADD
M3LNK,ADD
M3LKS,ADD
M3RT,ADD
MTP3RT,ADD
MTP3LKS)
MTP3(ADD
MTP3LNK)
The parameter
[PARA]SIGLKSX[/PARA] in
[MML]ADD MTP3LKS[/MML]
The [PARA]SIGLKSX[/PARA]
field in [MML]ADD
M3LKS[/MML]
The parameter
[PARA]SIGLKSX[/PARA] in
[MML]ADD M3LKS[/MML]
Not involved
RNC None Not involved
Transport channel None Not involved
MTP3 None Not involved
Cell(ADD
CELLAMRCWB)
RNC(SET
AMRCWB)
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
N (no impact on the UE in idle mode)
Cell(ADD
CELLAMRC)
RNC(SET
AMRC)
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
The following relationship must
be satisfied:
[PARA]GoldMaxMode[/PARA]
>=
[PARA]SilverMaxMode[/PARA
] >=
[PARA]CopperMaxMode[/PAR
A].
N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUPS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA] parameter is set to NOT_USED. N (No impact on the UE in idle mode)
Physical channel None Not involved
Physical channel None N (No impact on the UE in idle mode)
Physical channel None N (No impact on the UE in idle mode)
Physical channel None N (No impact on the UE in idle mode)
Physical channel None N (No impact on the UE in idle mode)
Physical channel None N (No impact on the UE in idle mode)
RNC None Y
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the start type should be set. Y
RNC None N (no impact on the UE in idle mode)
SRB None Not involved
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] is selected, the start month should be set. Y
Subsystem(ADD
CBSADDR)
Sub System(SET
NCELLDETECT
SWITCH)
RNC(ADD
IURCOMMSCCP
)
(ADD NODEB)
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
RNC None Not involved
VCL When the value of [PARA]LNKT[/PARA] in [MML]LOP VCL[/MML] is set to SAALLNK, the value of [PARA]SN[/PARA] should be set. N (No impact on the UE in idle mode)
RNC When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to SCUa, the value range of [PARA]SN[/PARA] is 6 to 7. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to GCUa/GCGa, the value range of [PARA]SN[/PARA] is 12 to 13. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to DPUb, the value range of [PARA]SN[/PARA] is 8 to 19. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to SPUa, the value range of [PARA]SN[/PARA] is 0 to 5 and 8 to 11. When the value of [PARA]BT[/PARA] in [MML]LOD PATCH[/MML] is set to PEUa,AEUa,FG2a,GOUa,AOUa,POUa,UOIa, the value range of [PARA]SN[/PARA] is 14 to 27. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
Subrack(ADD
BRD)
(CLR BRD)
RNC(ULD
RSTINFO,STR
CPUUSAGETST)
When [PARA]BRDTYPE[/PARA] in [MML]ADD BRD[/MML] is set to a value, the slot number and the backup mode are required. Not involved
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
Subrack(ADD
ETHREDPORT,
ACT MSP)
RNC(SET
MSP,SWP
ETHPORT,CLR
MSPREP,SET
MSPCMD)
This parameter is only valid to AOUa/UOIa_ATM/POUa/UOIa_IP board. Not involved
Services carried on this board
When the value of
[PARA]INHT[/PARA] in
[MML]INH BRD[/MML] is set
to LOGIC,the value range of
[PARA]SN[/PARA] is 0, 2, 4, 8
to 27.
When the value of
[PARA]INHT[/PARA] in
[MML]INH BRD[/MML] is set
to PHYSICAL,the value range of
[PARA]SN[/PARA] is 0 to 5, 8
to 27.
Y
RNC
When the value of
[PARA]UINT[/PARA] in
[MML]UIN BRD[/MML] is set
to LOGIC, the slot number is
required and the value range is 0,
2, 4, 8 to 27.
When the value of
[PARA]UINT[/PARA] in
[MML]UIN BRD[/MML] is set
to PHYSICAL, the slot number
is required and the value range is
0 to 5, 8 to 27.
Not involved
Optical Port None Not involved
(STR
IMATST,ADD
PPPLNK)
E1/T1 link(SET
E1T1LOP)
Cell(LOP E1T1)
RNC(ADD
FLOW,SET
BFDPROTOSW,
TRC MAC,STR
ETHOAMLOOP
TST,ADD
IPPATHBIND,A
DD
VLANID,ADD
MPLNK,ADD
DEVIP,ADD
IMAGRP,ADD
FRALNK,TRC
IPADDR,STR
E1T1TST)
board(SET CLK)
E1/T1(ADD
TSCROSS)
UNILNK(ADD
UNILNK)
IMA group(ADD
IMALNK)
Ethernet
port(STR
IPCHK,ADD
ETHTRKIP,ADD
ETHTRKLNK,A
DD
Only valid to the slot of FG2a
and GOUa.
For FG2a board, if the type of
port 0 is GE, the PN cannot be
1~3; if the type of port 4 is GE,
the PN cannot be 5~7.
none
Not involved
RNC None Not involved
RNC When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, the slot number of the SPUa should be set. Not involved
SAAL None Not involved
Adjacent Node When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, and the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to UNI_AAL2SWITCH, this parameter is valid. Not involved
SCTP None Not involved
RNC None Not involved
Board None Not involved
MTP3 None Not involved
RNC
SNAC needs to be set when [PARA]SnaExistInd[/PARA] in [MML]ADD IMSISNAMAP[/MML] is set to YES; SNAC does not need to be set when [PARA]SnaExistInd[/PARA] in [MML]ADD IMSISNAMAP[/MML] is set to PS_DOMAIN. Not involved
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]SPDF[/PARA] is set to WNF, this parameter is valid. Y
RNC This parameter depends on network planning. Y
RNC When the value of [PARA]SPDF[/PARA] is set to DNF, this parameter is valid. Y
Cell This parameter is valid when the HCS_SPD_EST_SWITCH is ON and [PARA]UseOfHcs[/PARA] is USED in [MML]ADD CELLHCS[/MML]. The HCS_SPD_EST_SWITCH in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
RNC
None Y
Ethernet port When the value of [PARA]BRDTYPE[/PARA] is set to FG2a,the value of [PARA]PTYPE[/PARA] is set to FE,[PARA]AUTO[/PARA] in [MML]SET ETHPORT[/MML] is set to DISABLE,the FE port rate can be set. N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC(ADD SPG)
Cell(ADD
QUICKCELLSET
UP,ADD
CELLSETUP)
None N (No impact on the UE in idle mode)
RNC
This parameter, [PARA]TrafficClass[/PARA], [PARA]UserPriority[/PARA] and [PARA]THP[/PARA] form an SPI mapping table. N (No impact on the UE in idle mode)
Ethernet port None Not involved
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]SpucHeavy[/PARA] >=
[PARA]SpucLight[/PARA];
100 >=
[PARA]SpucHeavy[/PARA] +
[PARA]SpucHyst[/PARA].
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]SpucLight[/PARA] >=
[PARA]SpucHyst[/PARA];
100 >=
[PARA]SpucHeavy[/PARA] +
[PARA]SpucHyst[/PARA].
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]SpucHeavy[/PARA] >=
[PARA]SpucLight[/PARA];
[PARA]SpucLight[/PARA] >=
[PARA]SpucHyst[/PARA].
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]SRBMBR[/PARA] >= [PARA]SRBGBR[/PARA]. N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]SRBMBR[/PARA] >= [PARA]SRBGBR[/PARA]. N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
E1/T1 None N (No impact on the UE in idle mode)
RNC None Not involved
RNC When the value of [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL, the value of this parameter should be set. N (No impact on the UE in idle mode)
RNC
The parameter must not be the
same as any IP address that has
been configured in the RNC.
The parameter must not be the
same as the internal IP address of
the BAM. Not involved
Ethernet
port(PING MAC)
RNC(TRC
MAC)
None Not involved
RNC When 2MBPS exists on the clock source, T1BPS is not allowed to be added; when T1BPS exists on the clock source, 2MBPS is not allowed to be added. Not involved
E1/T1 None N (No impact on the UE in idle mode)
SAAL When the value of [PARA]SAALLNKT[/PARA] is set to NNI, this parameter is valid. N (No impact on the UE in idle mode)
Subsystem(ADD
CBSADDR)
Sub System(SET
NCELLDETECT
SWITCH)
RNC(ADD
IURCOMMSCCP
)
(ADD NODEB)
None N (No impact on the UE in idle mode)
RNC(ACT
CRC,SET
ONLINE,SET
OFFLINE,FMT
DATA)
Cell(SET
MRSCOPECTRL
)
None Not involved
RNC None Not involved
RNC(ADD
RNCCBCPUID,T
RC IPADDR,SET
DEVPATCHPAR
A,ADD
FLOW,ACT
VCLCC,SET
BFDPROTOSW,
TRC MAC,STR
ETHOAMLOOP
TST,ADD
IPPATHBIND,A
CT FAN,STR
IPLOPTST,SET
SCUPORT,ADD
VLANID,ADD
MPLNK,SET
ETHPORT,SET
OPT,ADD
DEVIP,UIN
BRD,INH
BRD,ADD
IMAGRP,ADD
FRALNK,SET
MSP,SET
E1T1,SET
QUEUEMAP,SW
P
ETHPORT,ULD
RSTINFO,SET
OPTLOP,LOD
PATCH,STR
E1T1TST,SET
E1T1LOP,STR
When the value of
[PARA]OT[/PARA] in
[MML]LOD PATCH[/MML] is
set to SCUa, SPUa, DPUb,
PEUa, AEUa, FG2a, GOUa,
AOUa, POUa, UOIa, or ALL,
the value of
[PARA]SRN[/PARA] should be
set.
When the value of
[PARA]NODET[/PARA] in
[MML]ADD
ADJNODE[/MML] is set to
UNI_AAL2SWITCH, this
parameter is valid.
When the value of
[PARA]LNKT[/PARA] in
[MML]LOP VCL[/MML] is set
to SAALLNK, the value of
[PARA]SRN[/PARA] should be
set.
When the value of
[PARA]SRT[/PARA] in
[MML]SET CLK[/MML] is set
to RBS, the value of
[PARA]SRN[/PARA] should be
set.
When the value of
[PARA]LNKT[/PARA] in
[MML]ACT VCLCC[/MML] is
set to SAALLNK, the subrack
number should be set.
none
Not involved
board When the value of [PARA]SRT[/PARA] in [MML]SET CLK[/MML] is set to RBS, the value of [PARA]SRN[/PARA] should be set. Y
RNC None Not involved
SAAL None Not involved
Adjacent Node When the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to IUB, and the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to YES, or the value of [PARA]NODET[/PARA] in [MML]ADD ADJNODE[/MML] is set to UNI_AAL2SWITCH, this parameter is valid. Not involved
SCTP None Not involved
Transmission resource group None Not involved
RNC None Not involved
Board None Not involved
MTP3 None Not involved
RNC None N (No impact on the UE in idle mode)
RNC Valid when [PARA]BEQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
UE SRNTI needs to be set when [PARA]CONTEXTTYPE[/PARA] in [MML]RST IUR[/MML] is set to Context_Group; SRNTI does not need to be set when [PARA]CONTEXTTYPE[/PARA] in [MML]RST IUR[/MML] is set to Context or All_Contexts. Not involved
board None Y
Physical channel None N (Impact on network searching of UEs in idle mode)
board [PARA]SSCPUAVEUSAGEALMTHD[/PARA] must be smaller than [PARA]SSCPUMAXUSAGEALMTHD[/PARA]. Not involved
board [PARA]SSCPUMAXUSAGEALMTHD[/PARA] must be greater than [PARA]SSCPUAVEUSAGEALMTHD[/PARA] Not involved
RAB None N (No impact on the UE in idle mode)
DSP
1.When the value of
[PARA]BT[/PARA] in
[MML]SET CPUTHD[/MML] is
set to DPUb, the value of
[PARA]SSDSPAVEUSAGEAL
MTHD[/PARA] should be set.
2.[PARA]SSDSPAVEUSAGEA
LMTHD[/PARA] must be
smaller than
[PARA]SSDSPMAXUSAGEAL
MTHD[/PARA].
Not involved
DSP
1.When the value of
[PARA]BT[/PARA] in
[MML]SET CPUTHD[/MML] is
set to DPUb, the value of
[PARA]SSDSPAVEUSAGEAL
MTHD[/PARA] should be set.
2.[PARA]SSDSPMAXUSAGE
ALMTHD[/PARA] must be
bigger than
[PARA]SSDSPAVEUSAGEAL
MTHD[/PARA].
Not involved
Cell This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA] parameter is set to NOT_USED. N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
RNC
None Not involved
RNC(ULD
RSTINFO,STR
CPUUSAGETST,
ADD
RNCCBCPUID)
Cell(SET
MRSCOPECTRL
)
NodeB(ADD
NODEB)
None Not involved
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the start time should be set. Y
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index
1.When the value of
[PARA]ST[/PARA] in
[MML]ADD ATMTRF[/MML]
is set to CBR, the rate unit
should be set; when the value of
[PARA]UT[/PARA] is selected,
the peak rate should be set.
2.When the value of
[PARA]ST[/PARA] in
[MML]ADD ATMTRF[/MML]
is set to UBR_PLUS, the rate
unit should be set; when the
value of [PARA]UT[/PARA] is
selected, the minimum rate
should be set.
3.When the value of
[PARA]ST[/PARA] in
[MML]ADD ATMTRF[/MML]
is set to RTVBR or NRTVBR,
the rate unit should be set; when
the value of [PARA]UT[/PARA]
is selected, the peak rate and the
average rate should be set.
Not involved
RNC Restriction: [PARA]StaBlkNum5A[/PARA] >= [PARA]Thd5A[/PARA] N (no impact on the UE in idle mode)
Cell None N (no impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_1 or ON_2 or ON_3. N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_2 or ON_3. N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutdownSwitch[/PARA] is set to ON_3. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
SCCP None N (No impact on the UE in idle mode)
SAAL None N (No impact on the UE in idle mode)
RNC When the value of [PARA]DPCT[/PARA] is set to IUCS, IUPS, IUR, IUCS_RANAP, or IUCS_ALCAP, this parameter is valid. Y
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]STREAMMBR[/PARA] >= [PARA]STREAMGBR[/PARA]. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell This parameter must satisfy the following relationship: [PARA]STREAMMBR[/PARA] >= [PARA]STREAMGBR[/PARA]. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Physical channel
None N (No impact on the UE in idle mode)
Cell(ADD
CELLSETUP)
RNC(ADD
NRNCCELL)
This paramter is valid only when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
This parameter is valid only
when
[PARA]TxDiversityInd[/PARA]
is set to TRUE.
Y
RAB(ADD
TYPRABOLPC)
(ADD
TYPRABRLC)
None N (No impact on the UE in idle mode)
IP Path When the value of [PARA]FPMUXSWITCH[/PARA] in [MML]ADD IPPATH[/MML] is set to YES,this parameter is valid. N (no impact on the UE in connected mode and the UE in idle mode)
RNC None Not involved
Cell None Not involved
NodeB None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
board None N (No impact on the UE in idle mode)
RNC When [PARA]CNProtclVer[/PARA] in [MML]ADD CNNODE[/MML] is set to R99, set SupportCRType to CR527_SUPPORT or CR527_NOT_SUPPORT; when [PARA]CNProtclVer[/PARA] in [MML]ADD CNNODE[/MML] is set to R4, set SupportCRType to CR528_SUPPORT or CR528_NOT_SUPPORT; when [PARA]CNProtclVer[/PARA] in [MML]ADD CNNODE[/MML] is set to R5, set SupportCRType to CR529_SUPPORT or CR529_NOT_SUPPORT; when [PARA]CNProtclVer[/PARA] in [MML]ADD CNNODE[/MML] is set to R6, there is no SupportCRType that can be set. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
SRB None Not involved
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] in [MML]SET TZ[/MML] is set to WEEK or DATEWEEK, the start week should be set. Y
RNC None Not involved
RNC None Not involved
RNC When [PARA]CNDomainId[/PARA] in [MML]ADD CNNODE[/MML] is set to CS_DOMAIN, Switch3GPP25415CR0125 needs to be set. N (No impact on the UE in idle mode)
SCTP None N (No impact on the UE in idle mode)
SCTP None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC None Not involved
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES and the value of [PARA]SM[/PARA] in [MML]SET TZ[/MML] is set to WEEK, the start week sequence should be set. Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC T314 should be set greater than T302*N302 N (No impact on the UE in idle mode)
RNC T315 should be set greater than T302*N302 N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC T3212 needs to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN; T3212 does not need to be set when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to PS_DOMAIN. N (Changing the time for the UE in idle mode to initiate periodical location update)
RNC None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML]. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None N (No impact on the UE in idle mode)
Transport channel
None Not involved
Transport channel
This paramter is valid only when [PARA]TFsNumber[/PARA] is set to D2 or D3. Not involved
Transport channel This paramter is valid only when [PARA]TFsNumber[/PARA] is set to D3. Not involved
RNC 1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode)
RNC 1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode)
RNC 1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode)
RNC 1.[PARA]TbSizeIndex1[/PARA] < [PARA]TbSizeIndex2[/PARA] < [PARA]TbSizeIndex3[/PARA] < [PARA]TbSizeIndex4[/PARA] N (No impact on the UE in idle mode)
MTP3 None N (No impact on the UE in idle mode)
Cell
None Y
Cell This paramter is valid only when [PARA]CellChoice[/PARA] is set to 3GCELL. N (No impact on the UE in idle mode)
MTP3 None N (No impact on the UE in idle mode)
Cell This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA] parameter is set to NOT_USED. N (No impact on the UE in idle mode)
Cell This parameter is required when the [PARA]UseOfHcs[/PARA] parameter is set to USED but not required when the [PARA]UseOfHcs[/PARA] parameter is set to NOT_USED. N (No impact on the UE in idle mode)
Cell This parameter is valid only when [PARA]NonhcsInd[/PARA] is set to CONFIGURED. N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell This parameter is valid only when [PARA]NonhcsInd[/PARA] is set to CONFIGURED. N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell(ADD
CELLHCSHO)
RNC(SET
HCSHO)
None N (No impact on the UE in idle mode)
SRB None Not involved
SRB None Not involved
SRB None Not involved
Cell
This parameter is valid when [PARA]TpenaltyHcsReselect[/PARA] is not set to D0. N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to select to this neighbouring cell. On the other hand. the smaller the value is, the higher the possibility for the UE to select to this neighbouring cel. If the value is INFINITY, the UE can never choose this neighbouring cell to campus on.)
Cell
This parameter is valid when [PARA]TpenaltyHcsReselect[/PARA] is not set to D0. N(For the UE in idle mode, the larger the value of this parameter is, the lower the possibility for the UE to select to this neighbouring cell. On the other hand. the smaller the value is, the higher the possibility for the UE to select to this neighbouring cel. If the value is INFINITY, the UE can never choose this neighbouring cell to campus on.)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
Valid when [PARA]ChoiceRptUnitForAmrE[/PARA] is set to TEN_MSEC N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
Valid when [PARA]ChoiceRptUnitForBeE[/PARA] is set to TEN_MSEC N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
Valid when [PARA]ChoiceRptUnitForBeF[/PARA] is set to TEN_MSEC N (no impact on the UE in idle mode)
RNC
This parameter is valid only
when
[PARA]ChoiceRprtUnitForDlBa
sicMeas[/PARA] is set to
TEN_MSEC,and it must satisfy
the following relationship:
[PARA]TenMsecForDlBasicMe
as[/PARA] <
[PARA]IntraFreqLdbPeriodTime
rLen[/PARA] x 1000/2 (See
[MML]SET
LDCPERIOD[/MML] and
[MML]SET
SATLDCPERIOD[/MML]);
[PARA]TenMsecForDlBasicMe
as[/PARA] <
[PARA]PucPeriodTimerLen[/PA
RA] x 1000/2 (See [MML]SET
LDCPERIOD[/MML] and
[MML]SET
SATLDCPERIOD[/MML]);
[PARA]TenMsecForDlBasicMe
as[/PARA] <
[PARA]LdrPeriodTimerLen[/PA
RA] x 1000/2 (See [MML]SET
LDCPERIOD[/MML] and
[MML]SET
SATLDCPERIOD[/MML]);
[PARA]TenMsecForDlBasicMe
as[/PARA] <
[PARA]OlcPeriodTimerLen[/PA
RA]/2 (See [MML]SET
LDCPERIOD[/MML] and
[MML]SET
N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForDlOlcMeas[/PARA] is set to TEN_MSEC. N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForHsdpaRateMeas[/PARA] is set to TEN_MSEC. N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForHsdpaPwrMeas[/PARA] is set to TEN_MSEC. N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]ChoiceRprtUnitForHsupaRateMeas[/PARA] is set to TEN_MSEC. N (No impact on the UE in idle mode)
RNC
This parameter is valid only
when
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] is set to
TEN_MSEC,and it must satisfy
the following relationship:
[PARA]TenMsecForUlBasicMe
as[/PARA] <
[PARA]LdrPeriodTimerLen[/PA
RA] * 1000/2 (See [MML]SET
LDCPERIOD[/MML] and
[MML]SET
SATLDCPERIOD[/MML]);
[PARA]TenMsecForUlBasicMe
as[/PARA] <
[PARA]OlcPeriodTimerLen[/PA
RA] /2 (See [MML]SET
LDCPERIOD[/MML] and
[MML]SET
SATLDCPERIOD[/MML]) .
This parameter is valid only
when
[PARA]ChoiceRprtUnitForUlBa
sicMeas[/PARA] is set to
TEN_MSEC,and it must satisfy
the following relationship:
[PARA]TenMsecForUlBasicMe
as[/PARA] <
[PARA]LdrPeriodTimerLen[/PA
RA] x 1000/2;
[PARA]TenMsecForUlBasicMe
as[/PARA] <
[PARA]OlcPeriodTimerLen[/PA
RA]/2.
N (No impact on the UE in idle mode)
RNC
This parameter is valid only when [PARA]ChoiceRprtUnitForUlOlcMeas[/PARA] is set to TEN_MSEC. N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
Valid when [PARA]ChoiceRptUnitForVpE[/PARA] is set to TEN_MSEC N (no impact on the UE in idle mode)
Cell(ADD
CELLHCSHO)
RNC(SET
HCSHO)
The value of the parameter must
satisfy the function below:
[PARA]NFastSpdEst[/PARA]*[
PARA]TSlowSpdEst[/PARA]
>=
[PARA]NSlowSpdEst[/PARA]*[
PARA]TFastSpdEst[/PARA].
N (No impact on the UE in idle mode)
Physical channel This parameter is valid only when [PARA]SlotFormat[/PARA] is equal to or more than D8. Not involved
Transport channel
None Not involved
RNC None Not involved
RNC Restriction: [PARA]StaBlkNum5A[/PARA] >= [PARA]Thd5A[/PARA] N (no impact on the UE in idle mode)
RNC Restriction: [PARA]ThdEa[/PARA] <= [PARA]ThdEb[/PARA] N (no impact on the UE in idle mode)
RNC Restriction: [PARA]ThdEa[/PARA] <= [PARA]ThdEb[/PARA] N (no impact on the UE in idle mode)
RNC This parameter, [PARA]TrafficClass[/PARA], [PARA]UserPriority[/PARA], and [PARA]SPI[/PARA] form an SPI mapping table. This parameter is required when the [PARA]TrafficClass[/PARA] parameter is set to INTERACTIVE. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is required when the [PARA]TrafficClass[/PARA] parameter is set to INTERACTIVE; The mapping relationship between the traffic handling priority value of INTERACTIVE service and its corresponding class can be set through command [MML]SET IAVUSERTHPCLASS[/MML]. N (No impact on the UE in idle mode)
Ethernet port None Not involved
Ethernet port
None Not involved
Cell This paramter is valid only when [PARA]Priority(BLK CELL)[/PARA] is set to NORMAL. Not involved
AAL2 Path None Y
Ethernet port None Not involved
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERFREQHO
COV)
This parameter is valid when [PARA]InterFreqReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERRAT,ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to PERIODICAL_REPORTING. N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RAB This parameter is required when the [PARA]RlcMode[/PARA] parameter is set to AM and the [PARA]AmRlcCfgPara[/PARA] parameter is set to FLOWCONTROL_PARA. N (No impact on the UE in idle mode)
RNC None Not involved
Adjacent Node The TRMMAP index is configured by setting the value of [PARA]TMI[/PARA] in [MML]ADD TRMMAP[/MML]. N (No impact on the UE in idle mode)
Adjacent Node The TRMMAP index is configured by setting the value of [PARA]TMI[/PARA] in [MML]ADD TRMMAP[/MML]. N (No impact on the UE in idle mode)
Adjacent Node The TRMMAP index is configured by setting the value of [PARA]TMI[/PARA] in [MML]ADD TRMMAP[/MML]. N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
MTP3B None N (No impact on the UE in idle mode)
NodeB
1. If the NodeB is configured
with the NCP through
[MML]ADD NCP[/MML] or
configured with the CCP through
[MML]ADD CCP[/MML], the
transmission type cannot be
modified.
2. If a NodeB OM channel is set
up, the transmission type cannot
be modified.
3. If the NodeB is configured
with adjacent nodes through
[MML]ADD NCP[/MML], the
transmission type cannot be
modified.
4. If the NodeB is configured
with the electrical serial number
through [MML]ADD
NODEBESN[/MML] and the
transmission type is supposed to
be modified to ATM
transmission, the transmission
type cannot be modified.
Y
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]DST[/PARA] in [MML]SET TZ[/MML] is set to YES, the adjust method should be set. Y
Transport channel
None N (No impact on the UE in idle mode)
Transport channel
None N (No impact on the UE in idle mode)
Cell This paramter is valid only when [PARA]DynShutDownType[/PARA] is set to ConditionalShutDown. N (No impact on the UE in idle mode)
RNC None Not involved
Cell
None N(For the UE in idle mode, the larger the value of this parameter is, the smaller the Ping-Pong effect in the cell reselection between different Hierarchy cells. But if the value is to small, the effect of the HCS algorithm is bad.)
RAB None N (No impact on the UE in idle mode)
RNC
This parameter,
[PARA]UserPriority[/PARA],
[PARA]THP[/PARA], and
[PARA]SPI[/PARA] form an
SPI mapping table.
N (No impact on the UE in idle mode)
RNC(SET
REDIRECTION)
Cell(ADD
CELLREDIRECT
ION)
None N (No impact on the UE in idle mode)
RNC None Not involved
Cell None N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
IP Path None Not involved
RNC(ADD
ADJMAP,ADD
TRMMAP)
Adjacent
Node(ADD
ADJNODE)
When the value of
[PARA]ITFT[/PARA] in
[MML]ADD TRMMAP[/MML]
is set to IUB, IUR or IUCS, this
parameter is valid.
When the value of
[PARA]ITFT[/PARA] in
[MML]ADD TRMMAP[/MML]
is set to IUB_IUR_IUCS, this
parameter is valid.
When the value of
[PARA]NODET[/PARA] in
[MML]ADD
ADJNODE[/MML] is set to
IUB, IUR, IUCS, or IUPS, this
parameter is valid.
Not involved
Transport channel
None Not involved
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
Cell(ADD
CELLHCSHO)
RNC(SET
HCSHO)
None N (No impact on the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
Cell None N(impact on Cell Selection and Reselection of the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index None Not involved
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
SMLC,SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
SMLC,SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLMBDRINT
ERFREQ,ADD
CELLINTERFRE
QHONCOV)
RNC(SET
INTERFREQHO
NCOV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV)
RNC(SET
INTERRATHOC
OV)
This parameter is valid when [PARA]InterRatReportMode[/PARA] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HONCOV)
RNC(ADD
CELLMBDRINT
ERRAT,SET
INTERRATHON
COV)
None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Ethernet port None Not involved
Ethernet port None Not involved
Ethernet port
None Not involved
Cell None N (No impact on the UE in idle mode)
RNC This paramter is valid only when [PARA]CellChoice[/PARA] is set to 3GCELL. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
LGC port None Not involved
Cell When the value of [PARA]BT[/PARA] in [MML]LOP E1T1[/MML] is set to AEUa or PEUa, the value of [PARA]TS[/PARA] should be set. Y
E1T1 link When the value of [PARA]BT[/PARA] in [MML]SET E1T1[/MML] is set to AEUa, the value of [PARA]LS[/PARA] in [MML]SET E1T1[/MML] is set to SINGLE and the value of [PARA]LNKT[/PARA] in [MML]SET E1T1[/MML] is set to E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME , the value of [PARA]TS16ENABLE[/PARA] can be set. Not involved
PPP Link(ADD
PPPLNK)
E1/T1 port(ADD
FRALNK)
RNC(ADD
MPLNK)
1.The time slot 0 can not be
configured.
2.When the value of
[PARA]BRDTYPE[/PARA] in
[MML]ADD PPPLNK[/MML]is
set to PEUa, the value
of[PARA]TSBITMAP[/PARA]
must be set.
3.When the value of
[PARA]BRDTYPE[/PARA] in
[MML]ADD MPLNK[/MML]is
set to PEUa, the value
of[PARA]TSBITMAP[/PARA]
must be set.
Not involved
E1/T1 None N (No impact on the UE in idle mode)
RNC None Not involved
Cell(ADD
CELLHCSHO)
RNC(SET
HCSHO)
The value of the parameter must
satisfy the function below:
[PARA]NFastSpdEst[/PARA]*[
PARA]TSlowSpdEst[/PARA]
>=
[PARA]NSlowSpdEst[/PARA]*[
PARA]TFastSpdEst[/PARA].
N (No impact on the UE in idle mode)
UE This parameter is valid when [PARA]TstSwitch[/PARA] is set to ON. N (No impact on the UE in idle mode)
Ethernet port None Not involved
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]STPMODE[/PARA] in [MML]STR CPUUSAGETST[/MML] is set to YES, this parameter is valid. Y
Ethernet port None Not involved
LGC port None Not involved
IP Path None N (No impact on the UE in idle mode)
Transmission resource group When [PARA]GRPT[/PARA] in [MML]ADD RSCGRP[/MML] is set to ATM or [PARA]BWMODE[/PARA] is set to FULL_DUPLEX, this parameter is valid;The sum of [PARA]TxBw[/PARA] and [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]TxBw[/PARA] and [PARA]AllBw[/PARA] in [MML]ADD RSCGRP[/MML]of lower class RSCGRP;The [PARA]TxBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]TxBw[/PARA] in [MML]ADD RSCGRP[/MML] of lower class RSCGRP, and the [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of upper class RSCGRP can not less than the [PARA]RxBw[/PARA] in [MML]ADD RSCGRP[/MML] of lower class RSCGRP. N (No impact on the UE in idle mode)
Cell
None Y
Ethernet port None Not involved
Ethernet port None Not involved
IPoA PVC(ADD
IPOAPVC)
AAL2 Path(ADD
AAL2PATH)
SAAL(ADD
SAALLNK)
RNC(ADD
VPCLCX)
1.When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD IPOAPVC[/MML]
is set to UNI, IMA, FRAATM,
NCOPT, or ATMLGCPORT,
this parameter is required.
2.When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
UNI, IMA, FRAATM, NCOPT,
or ATMLGCPORT, this
parameter is required.
When the value of
[PARA]CARRYT[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
UNI, IMA, FRAATM, NCOPT,
or ATM logic port, this
parameter is valid.
When the value of
[PARA]CARRYT[/PARA] is set
to IMA, UNI, FRAATM,
NCOPT, or ATMLGCPORT,
this parameter is valid.
N (No impact on the UE in idle mode)
Control interface link None Y
Cell
None Y
Cell
When [PARA]UARFCNUplinkInd[/PARA] is set to TRUE, this parameter need to manual configure;or else need to automatic configure with the restriction relation UL and DL frequency. Y
Cell
None Y
RNC None N (No impact on the UE in idle mode)
IP Path When the value of [PARA]UDPMUXMODRECV[/PARA] in [MML]ADD IPPATH[/MML] is set to RTPCOMP, this parameter is valid. N (No impact on the UE in idle mode)
IP Path When the value of [PARA]ITFT[/PARA] in [MML]ADD IPPATH[/MML] is set to IUCS, this parameter is valid. N (No impact on the UE in idle mode)
IP Path When the value of [PARA]ITFT[/PARA] in [MML]ADD IPPATH[/MML] is set to IUCS, this parameter is valid. N (No impact on the UE in idle mode)
IP Path When the value of [PARA]UDPMUXMODRECV[/PARA] in [MML]ADD IPPATH[/MML] is set to RTPCOMP, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None Not involved
E1T1 Link When the value of [PARA]BT[/PARA] in [MML]STR E1T1TST[/MML] is set to AEUa or PEUa, this parameter is valid. Not involved
SRB None Not involved
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
RNC(SET
FRCCHLTYPEP
ARA)
Cell(ADD
CELLFRC) If this parameter is set through both the [MML]SET FRCCHLTYPEPARA[/MML] and [MML]ADD CELLFRC[/MML] commands, the parameter set through the [MML]ADD CELLFRC[/MML] command takes precedence over that set through the [MML]SET FRCCHLTYPEPARA[/MML] command. N (No impact on the UE in idle mode)
RNC This parameter can be used for selection of the initial rate for BE services only when the DCCC_SWITCH under the [PARA]Chswitch[/PARA] parameter is set to on through the [MML]SET CORRMALGOSWITCH[/MML] command. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlOlcTrigThd[/PARA](
See [MML]ADD
CELLLDM[/MML]) >=
[PARA]UlCellTotalThd[/PARA]
;
[PARA]UlCellTotalThd[/PARA]
>
[PARA]UlNonCtrlThdForHo[/P
ARA] .
N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
RNC
When the value of
UlMidRateCalc is
HAND_APPOINT,the following
relationship must be satisfied:
[PARA]UlDcccRateThd[/PARA
] <=
[PARA]UlMidRateThd[/PARA].
N (no impact on the UE in idle mode)
RAB None N (No impact on the UE in idle mode)
Cell(ADD
CELLDCCC)
RNC(SET
DCCC)
This parameter is available if the value of [PARA]BEQosPerform[/PARA] in [MML]SET QOSACT[/MML] is YES. N (no impact on the UE in idle mode)
RNC
For the BE users with the same
[PARA]TrafficClass[/PARA],
[PARA]THPClass[/PARA] and
[PARA]BearType[/PARA]
values, make sure:
[PARA]UlGBR[/PARA] of
GOLD users
([PARA]UserPriority[/PARA] is
set to GOLD) >=
[PARA]UlGBR[/PARA] of
SILVER users
([PARA]UserPriority[/PARA] is
set to SILVER) >=
[PARA]UlGBR[/PARA] of
COPPER users
([PARA]UserPriority[/PARA] is
set to COPPER).
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlHoCeResvSf[/PARA]
>=
[PARA]UlLdrCreditSfResThd[/
PARA] .
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) The value of this parameter must not be larger than [PARA]UlHoCeResvSf[/PARA]. N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlLdrTrigThd[/PARA]
>=
[PARA]UlLdrRelThd[/PARA];
[PARA]UlOlcRelThd[/PARA]
>=
[PARA]UlLdrRelThd[/PARA].
N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR)
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlLdrTrigThd[/PARA]
>=
[PARA]UlLdrRelThd[/PARA];
[PARA]UlOlcTrigThd[/PARA]
>
[PARA]UlLdrTrigThd[/PARA];
[PARA]UlNonCtrlThdForOther[
/PARA](See [MML]ADD
CELLCAC[/MML]) >=
[PARA]UlLdrTrigThd[/PARA].
N (No impact on the UE in idle mode)
NodeB None N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
RNC The parameter is valid when [PARA]UlRateUpAdjLevel[/PARA] in [MML]SET DCCC[/MML] is set to 3_Rates, or [PARA]UlRateDnAdjLevel[/PARA] in [MML]SET DCCC[/MML] is set to 3_Rates. N (no impact on the UE in idle mode)
RNC
The parameter is valid when
[PARA]UlMidRateCalc[/PARA]
in [MML]SET DCCC[/MML] is
set to HAND_APPOINT, and
the following relationship must
be satisfied:
[PARA]UlDcccRateThd[/PARA
] <=
[PARA]UlMidRateThd[/PARA].
N (no impact on the UE in idle mode)
RNC
The following relationship must
be satisfied:
[PARA]UlModeChangeTimerLe
n[/PARA] <=
[PARA]DlModeChangeTimerLe
n[/PARA]. N (no impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlNonCtrlThdForHo[/P
ARA] >
[PARA]UlNonCtrlThdForAMR[
/PARA];
[PARA]UlNonCtrlThdForAMR[
/PARA] >
[PARA]UlNonCtrlThdForOther[
/PARA].
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlCellTotalThd[/PARA]
>
[PARA]UlNonCtrlThdForHo[/P
ARA] ;
[PARA]UlNonCtrlThdForHo[/P
ARA] >
[PARA]UlNonCtrlThdForAMR[
/PARA];
[PARA]UlNonCtrlThdForHo[/P
ARA] >
[PARA]UlNonCtrlThdForNonA
MR[/PARA] .
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlNonCtrlThdForHo[/P
ARA] >
[PARA]UlNonCtrlThdForNonA
MR[/PARA];
[PARA]UlNonCtrlThdForNonA
MR[/PARA] >
[PARA]UlNonCtrlThdForOther[
/PARA].
N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlNonCtrlThdForAMR[
/PARA] >
[PARA]UlNonCtrlThdForOther[
/PARA];
[PARA]UlNonCtrlThdForNonA
MR[/PARA] >
[PARA]UlNonCtrlThdForOther[
/PARA];
[PARA]UlNonCtrlThdForOther[
/PARA] >=
[PARA]UlLdrTrigThd[/PARA].
N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlOlcTrigThd[/PARA]
>=
[PARA]UlOlcRelThd[/PARA];
[PARA]UlOlcRelThd[/PARA]
>=
[PARA]UlLdrRelThd[/PARA].
N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC
None N (No impact on the UE in idle mode)
Cell
The value of this parameter must
satisfy the following relationship:
[PARA]UlOlcTrigThd[/PARA]
>
[PARA]UlLdrTrigThd[/PARA];
[PARA]UlOlcTrigThd[/PARA]
>=
[PARA]UlOlcRelThd[/PARA];
[PARA]UlOlcTrigThd[/PARA]
>=
[PARA]UlNonCtrlThdForHo[/P
ARA](See [MML]ADD
CELLCAC[/MML]).
N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
Cell(ADD
CELLLDR)
NodeB(ADD
NODEBLDR) None N (No impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
Cell(ADD
CELLQOSHO)
RNC(SET
QOSHO)
None N (No impact on the UE in idle mode)
RNC Valid when [PARA]VPQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
Cell(ADD
CELLCMCF)
RNC(SET
CMCF)
None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to NOPRIORITY. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC This parameter is valid only when [PARA]AFSetObj[/PARA] is set to GGOLD, SILVER, or COPPER. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC Restriction: [PARA]UlThd6A1[/PARA] <= [PARA]UlThd6B1[/PARA] N (no impact on the UE in idle mode)
RNC
Restrictions:
1) [PARA]UlThd6A2[/PARA]
<= [PARA]UlThd6B2[/PARA];
2) [PARA]UlThd6A2[/PARA] >
[PARA]UlThd6B1[/PARA] N (no impact on the UE in idle mode)
RNC
Restrictions:
1) [PARA]UlThd6A1[/PARA]
<= [PARA]UlThd6B1[/PARA];
2) [PARA]UlThd6A2[/PARA] >
[PARA]UlThd6B1[/PARA] N (no impact on the UE in idle mode)
RNC Restriction: [PARA]UlThd6A2[/PARA] <= [PARA]UlThd6B2[/PARA] N (no impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC This parameter can only be set to 1 when the [PARA]PwrCtrlAlg[/PARA] parameter is set to ALGORITHM2. N (No impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell(ADD
CELLQUALITY
MEAS)
RNC(SET
QUALITYMEAS
)
None N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell Valid when [PARA]CellLocCfgType[/PARA] is set to BOTH or CELL_CENTER N (no impact on the UE in idle mode)
Cell
Valid when
[PARA]CellLocCfgType[/PARA
] is set to BOTH or
CELL_CENTER;
[PARA]UncertSemiMajor[/PAR
A]>=[PARA]UncertSemiMinor[/
PARA].
N (no impact on the UE in idle mode)
Cell
Valid when
[PARA]CellLocCfgType[/PARA
] is set to BOTH or
CELL_CENTER;
[PARA]UncertSemiMajor[/PAR
A]>=[PARA]UncertSemiMinor[/
PARA].
N (no impact on the UE in idle mode)
Cell
Valid when
[PARA]CellLocCfgType[/PARA
] is set to BOTH or
CELL_CENTER;
[PARA]UncertSemiMajor[/PAR
A]>=[PARA]UncertSemiMinor[/
PARA].
N (no impact on the UE in idle mode)
Cell
Valid when
[PARA]CellLocCfgType[/PARA
] is set to BOTH or
CELL_CENTER;
[PARA]UncertSemiMajor[/PAR
A]>=[PARA]UncertSemiMinor[/
PARA].
N (no impact on the UE in idle mode)
UNILNK None N (No impact on the UE in idle mode)
RNC The value of this parameter must be smaller than the value of the [PARA]RecountingPeriod[/PARA] parameter under the [MML]SET RNCMBMSPARA[/MML] command. N (No impact on the UE in idle mode)
Adjacent Node When the value of [PARA]IsROOTNODE[/PARA] in [MML]ADD ADJNODE[/MML] is set to NO, this parameter is valid. Not involved
Transmission resource group When [PARA]ISFIRSTCLASSE[/PARA] in [MML]ADD RSCGRP[/MML] is set to NO, this parameter is valid. Not involved
LGC port None Not involved
Cell None Not involved
Cell None Not involved
Cell None Not involved
Cell None Not involved
Cell None Not involved
Cell None Not involved
Cell None Not involved
Cell None Not involved
Cell(ADD
CELLURA,ADD
URA)
RNC(ADD
NRNCURA) None N (No impact on the UE in idle mode)
Cell None Not involved
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] and [PARA]MeasQuantityOf3A[/PARA] is CPICH_EC/NO or AUTO. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] and [PARA]MeasQuantityOf3A[/PARA] is CPICH_RSCP or AUTO. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
This parameter is valid when the
OVERLAY_SWITCH is ON
The OVERLAY_SWITCH is in
[PARA]HoSwitch[/PARA] in
[MML]SET
CORRMALGOSWITCH[/MML
].
This parameter is valid when the
OVERLAY_SWITCH is ON
The OVERLAY_SWITCH is in
[PARA]HoSwitch[/PARA] in
[MML]SET
CORRMALGOSWITCH[/MML
] and
[PARA]MeasQuantityOf3A[/PA
RA] is CPICH_EC/NO or
AUTO.
N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
This parameter is valid when the
OVERLAY_SWITCH is ON
The OVERLAY_SWITCH is in
[PARA]HoSwitch[/PARA] in
[MML]SET
CORRMALGOSWITCH[/MML
].
This parameter is valid when the
OVERLAY_SWITCH is ON
The OVERLAY_SWITCH is in
[PARA]HoSwitch[/PARA] in
[MML]SET
CORRMALGOSWITCH[/MML
] and
[PARA]MeasQuantityOf3A[/PA
RA] is CPICH_RSCP or AUTO.
N (No impact on the UE in idle mode)
Cell(ADD
CELLQOSHO)
RNC(SET
QOSHO)
This parameter is valid when [PARA]InterRatReportMode[/PARA] in [MML]SET INTERRATHOCOV[/MML] or [MML]ADD CELLINTERRATHOCOV[/MML] is set to EVENT_TRIGGER. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] and [PARA]MeasQuantityOf3A[/PARA] is CPICH_EC/NO or AUTO. N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in [PARA]HoSwitch[/PARA] in [MML]SET CORRMALGOSWITCH[/MML] and [PARA]MeasQuantityOf3A[/PARA] is CPICH_RSCP or AUTO. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell(ADD
GSMCELL,ADD
CELLHCS)
RNC(ADD
NRNCCELL) None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
Cell None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC
This parameter,
[PARA]TrafficClass[/PARA],
[PARA]THP[/PARA], and
[PARA]SPI[/PARA] form an
SPI mapping table.
N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
SAALLNK/AAL2PATH/IPOAPVC/VPCLCX using this ATM traffic record index None Not involved
AAL2 Path When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. Y
PVC When the value of [PARA]LNKT[/PARA] in [MML]ACT VCLCC[/MML] is set to SAALLNK, AAL2PATH, or IPOAPVC, the VCL activating type should be set. Not involved
SCTP(ADD
SCTPLNK)
IP Path(ADD
IPPATH) This parameter determines whether the parameter [PARA]VLANID[/PARA] in [MML]ADD SCTPLNK[/MML] is valid. Y
RNC(ADD
VLANID)
IP Path(ADD
IPPATH)
SCTP(ADD
SCTPLNK)
Ethernet
port(ADD
ETHMA)
When the value of
[PARA]VLANFlAG[/PARA] in
[MML]ADD IPPATH[/MML] is
set to ENABLE, this parameter is
valid.
When the value of
[PARA]VLANFlAG[/PARA] in
[MML]ADD SCTPLNK[/MML]
is set to ENABLE, this parameter
is valid.
Not involved
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR or IUCS, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC When the value of [PARA]ITFT[/PARA] in [MML]ADD TRMMAP[/MML] is set to IUB or IUR, this parameter is valid. N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
SRB None Not involved
RNC None Not involved
AAL2 Path When the value of [PARA]CARRYT[/PARA] in [MML]ADD AAL2PATH[/MML] is set to UNI, IMA, FRAATM, NCOPT, or ATM logic port, this parameter is valid. Y
Cell(ADD
CELLSETUP,AD
D
QUICKCELLSET
UP)
RNC(ADD
NRNCCELL)
None N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC None N (No impact on the UE in idle mode)
RNC Valid when [PARA]AMRQosPerform[/PARA] is set to YES N (no impact on the UE in idle mode)
SRB None Not involved
Cell(ADD
CELLINTRAFRE
QHO)
RNC(SET
INTRAFREQHO)
None N (No impact on the UE in idle mode)
Cell(ADD
CELLINTERRAT
HOCOV,ADD
CELLINTERFRE
QHOCOV)
RNC(SET
INTERRATHOC
OV,SET
INTERFREQHO
COV)
None N (No impact on the UE in idle mode)
SAAL None N (No impact on the UE in idle mode)
RNC None Not involved
RNC None Not involved
E1T1 link When the value of [PARA]BT[/PARA] in [MML]SET E1T1[/MML] is set to AEUa/PEUa and the value of [PARA]LS[/PARA] is set to ALL,the value of [PARA]WORKMODE[/PARA] can be set to E1_UNBA,E1_BA,or T1. When the value of [PARA]BT[/PARA] in [MML]SET E1T1[/MML] is set to AOUa/P0Ua,the value of [PARA]WORKMODE[/PARA] can be set to T1 or E1. Not involved
Port When the value of [PARA]RT[/PARA] in [MML]SET MSP[/MML] is set to REVERTIVE, the recovery time should be set. Not involved
RNC This parameter defines an offset relative to the [PARA]NCountingThd[/PARA] parameter. N (No impact on the UE in idle mode)
RNC None N (no impact on the UE in idle mode)
RNC None Y
Interruption Scope Interruption Duration(min) Caution Access
AAL2 Path Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The deleting operation can be done three minutes after ADD GPS operation. Read & Write
Subsystem Less than 10 minutes CPU usage to be increased. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The deleting operation can be done three minutes after ADD GPS operation. Read & Write
Not involved Not involved
1. The AGPS reference
receiver can be added to an
RNC or a NodeB according
to [AGPS type]. If the
AGPS type is RNC, the
AGPS reference receiver is
added to the RNC. If the
AGPS type is NodeB, the
AGPS reference receiver is
added to the NodeB.
2. One RNC can be
configured with one AGPS
reference receiver at most
while one NodeB can be
configured with five AGPS
reference receivers at most.
3.If the AGPS reference
receiver is configured in the
RNC, the AGPS reference
receiver must be integrated
on the clock card.
4. If the AGPS reference
receiver is added to a
NodeB, the ID of the home
cell of the AGPS reference
receiver must be specified,
and this cell must have been
configured.
5. If the AGPS reference
recevier is added to an
NRNC, the ID of the home
RNC of the AGPS
reference receiver must be
specified and this NRNC
Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Service not interrupted, but CPU will be high This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
The service on the Ethernet Port. Interrupt the service until the correct gateway is set or the port swapping or the changing of IP route is finished. In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. Read & Write
Not involved Not involved If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. Read & Write
Not involved Not involved The modification of ATT is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN.The parameter modification has no impact on the equipment. Read & Write
PPP link Interrupt the service until negotiate successfully again. The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
PPP link Interrupt the service until negotiate successfully again. The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
PPP link Interrupt the service until negotiate successfully again. The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
Not involved Not involved The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The modification may affect the state of the port, may interrupt service temply. If the modification is not consistent, service may be interrupted. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Less than 5 minutes Each 8 kHz clock of the backplane corresponds to only one clock source. The same 8 kHz clock switch of the backplane cannot be turned on for multiple interface boards at the same time. Read & Write
RNC Less than 5 minutes Each 8 kHz clock of the backplane corresponds to only one clock source. The same 8 kHz clock switch of the backplane cannot be turned on for multiple interface boards at the same time. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Cell Less than 5 minutes None Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Service not interrupted, but CPU will be high This parameter cannot be modified. Read & Write
RNC Less than 5 minutes This parameter cannot be modified. Read & Write
Not involved Not involved If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
When the value of [PARA]BWADJ[/PARA] in [MML]ADD IPLOGICPORT[/MML] is set to ON, it may impact current users and bring flow control. Not involved The auto adjust bandwidth parameter can be enabled only when the IPPATH over the logic port activate the IPPM function. Read & Write
Not involved Not involved The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0 Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0 Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0 Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
AAL2 Path Less than 5 minutes The parameter modification has no impact on the equipment. Read & Write
IP Path Less than 5 minutes The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter is the bearing slot number and cannot be modified. Read & Write
Not involved Not involved This parameter is the bearing subrack number and cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
AAL2 Path Less than 5 minutes The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Services carried on the SAAL link The services are interrupted until the SAAL link is working normally. The configuration data must be consistent with that of the peer end. Read & Write
Services carried on the SAAL link The services are interrupted until the SAAL link is working normally. The configuration data must be consistent with that of the peer end. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved 1. Cell ID is in one-to-one correspondence with Service Area Identity (SAI). 2. SAI = PLMN + LAC + SAC. PLMN-Id (Public Land Mobile Network - Identity) is configured through the command [MML]ADD CNOPERATOR[/MML] and LAC (Location Area Code) is configured through the command [MML]ADD CELLSETUP[/MML]. LAC of CBS is the same as that of CS/PS. This parameter is SAC. 3. SAC of CBS is different from that of CS/PS because SAC of CBS need not be configured through the command [MML]ADD SAC[/MML] in advance. 4. When the CBS is active, [PARA]CBSSAC[/PARA] must not be removed or modified. 5. The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved After running the [MML]ADD CBSADDR[/MML] command to add the CBS server address, you should not set this parameter to ON; After setting this parameter to ON, you should not run the [MML]ADD CBSADDR[/MML] command to add the CBS server address. The RNC built-in CBS function is available when this parameter is set to ON. When using this function, set the main control CPU ID of the CBS function by referring to [MML]ADD RNCCBCPUID[/MML] and add CBS cells by referring to [MML]ADD CELLCBSSAC[/MML].The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved When the network is in poor running status, the number of detection times cannot be set to a small value. If the value is too small, the path status may be affected. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommended. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommended. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The checksum calculation should be negotiated with the peer end, as described in RFC4960. The CRC32 is recommended. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Less than 10 minutes If the clock board type is changed from GCGa to GCUa, the clock board should not be configured with GPS. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The CN indexes of the same PLMN even the different CN domain cannot be the same. When the Iu-Flex function is used, each CN domain (CS/PS) can be configured with up to 32 CN nodes. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved When the Iu-Flex function is used, the protocol version of each CN node must be R5 or later.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter is used for power monitor. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter is based on actual networking. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The settings of CsInfoUpdFlag is valid only when the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX or SUPP_IUFLEX_MOCN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The settings of CsInfoUpdTmr is valid only when the value of [PARA]CsInfoUpdFlag[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to ON.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R5 or any later version,
CsNriCfgMode may be set
to SUPP_IUFLEX.The
parameter modification has
no impact on the
equipment.
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R6 or any later version,
CsNriCfgMode may be set
to SUPP_MOCN or
SUPP_IUFLEX_MOCN.Th
e parameter modification
has no impact on the
equipment.
Read & Write
Not involved Not involved The settings of CSNRILength is valid only when the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX, SUPP_MOCN or SUPP_IUFLEX_MOCN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved If the time delay is very large on the line, and the max differ delay is low, Several links can not be activated. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved When running this command, ensure that the source IP address and the destination IP address cannot be the local IP address of the configured IP path and the detected peer IP address. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
RNC Less than 10 minutes After this parameter is modified, the RNC must be reset to take effect. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Less than 10 minutes After this parameter is modified, the RNC must be reset to take effect. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. This parameter must be consistent with the peer equipment. The Full mode is recommended. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This address must be a peer address in normal status, and the peer equipment can respond to the PING request. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Interrupt the service until the parameter is correctly set.
1.You can set the DST start
date or end date by setting
the StartType or EndType
parameter to
"DATEWEEK" type. In this
case, you must set the
benchmark day to (n - 6) or
earlier, where n represents
the last day of the month.
For example, in October,
you must set the benchmark
day to 25 (= 31 - 6) or
earlier. If you set the date to
"Tuesday in or after
Oct.26", it is invalid in year
2005 for the date exceeds
the month scope while in
year 2006 it is October 31, a
valid day. Therefore, you
must abide this
specification to ensure the
setting is valid in each year.
2. When you set a
customized daylight saving
time, you cannot set the
start date or end date of the
daylight saving time to
February 29 by setting the
StartType or EndType
parameter to the DATE
type. The reason is that the
local time cannot be
translated to the daylight
saving time in a leap year
Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q704. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
PPP link Interrupt the service until negotiate successfully again. Modify this parameter will cause failure in negotiation. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOUa/PEUa/UOIa/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
This parameter cannot be modified. This parameter cannot be modified. In [MML]EXP ELABEL[/MML], the [PARA]FN[/PARA] parameter cannot be a space or any of the following characters: '@', '#', '!', '%', '^', '&', '*', '[', ']', '\'', '\\'. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When this parameter is set to No_HC, you can disable the header compress function; when this parameter is set to RTP/UDP/IP_HC, you can enable the RTP/UDP/IP/PPP header compress function. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This FACTORTABLE must be already configured. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0 Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0 Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved The following conditions should be met: forward handover reserved bandwidth < forward congestion threshold < forward congestion clear threshold, or forward handover reserved bandwidth = forward congestion threshold = forward congestion clear threshold = 0 Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved
The following constraints
should be fulfilled
separately in forward or
backward configurations:
Handover reserved
bandwidth < Congestion
threshold < Congestion
clear threshold <
Configured bandwidth, or
Handover reserved
bandwidth = Congestion
threshold = Congestion
clear threshold = 0. When
Transport Resource Group
Type is ATM, before
comparing with congestion
threshold parameter,
Configured bandwidth
should wipe off the effect
of 5 octets ATM protocol
header.
Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For details of the timer, refer to ITU-T Q.714. The modification is not recommended. Read & Write
Not involved Not involved For details of the timer, refer to ITU-T Q.714. The modification is not recommended. Read & Write
Not involved Not involved When the network is in poor running status, the packet size cannot be set to a large value. If the value is too large, the path status may be affected. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter value of IgorTmr must be less than the value of [PARA]IntrTmr[/PARA] set in [MML]SET IUTIMERANDNUM[/MML].The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved [IMA ID] is used to identify the IMA group. Normally, in one interface board, the sending IMA ID can not be the same. In order to avoid duplicate IMA ID between RNC and NodeB, it is suggested that the IMA ID in RNC is set different from that in NodeB. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The protocol version of IMA group in RNC must be the same with that in the peer device. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
RNC Inhibition period of the boardOnly the OM channel can be kept between the logically inhibited board and the other boards, whereas the service channel between them will be inhibited. The operator can run some OM commands on this inhibited board. The physically inhibited board becomes unavailable, and the board status and the equipment panel show that the board is not configured. After the inhibition is cancelled, the board can work normally. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved If the Inter RAT Inter Plmn Ho Allowed is switched off,Neighbor cells belonging to different PLMNs in the inter RAT should be removed. Read & Write
Not involved Not involved If the Intra RAT Inter Plmn Ho Allowed is switched off,Neighbor cells belonging to different PLMNs in the intra RAT should be removed. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Port The time between deactivate and activate the port. This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter value of IntrTmr must be greater than the value of [PARA]IgorTmr[/PARA] set in [MML]SET IUTIMERANDNUM[/MML].The parameter modification has no impact on the equipment. Read & Write
Services carried on PVC Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter must be the same with the local and peer device. Read & Write
Not involved Not involved When this parameter is set to No_HC, you can disable the header compress function; when this parameter is set to RTP/UDP/IP_HC, you can enable the RTP/UDP/IP/PPP header compress function. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved If the transport type of the NodeB is IUB-ATM, the next hop IP address must be the peer IP address of the configured IPoA PVC. If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. Read & Write
Not involved Not involved If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. Read & Write
Not involved Not involved The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable. Read & Write
Not involved Not involved The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The settings of the local end and the peer end should be consistent. Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved The value of this parameter should be consistent with the peer one. Read & Write
Not involved Not involved Modifying this parameter may affect the sensitivity of SAAL link detection. Read & Write
Not involved Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This load EQ table must be already configured. Read & Write
Not involved Not involved This load EQ table must be already configured. Read & Write
Not involved Not involved This load EQ table must be already configured. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Service not interrupted, but CPU will be high This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The line code should be consistent with the interconnected one.HDB3(HDB3 coding) and AMI(AMI coding)is used in E1 link. B8ZS(B8ZS coding) and AMI_ZCS(AMI coding)is used in T1 link. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The link selection mask should be properly set according to MTP3 load sharing. If it is not properly set, the MTP3 links cannot share load with each other. Read & Write
Not involved Not involved The frame structure should be consistent with the interconnected one. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The local IP address and the peer IP address must be in the same network segment, and the peer IP address cannot be the same as the local IP address in the RNC. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The addresses of both ends of the SCTP are the parameters that should be negotiated with the peer end before modification. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The addresses of both ends of the SCTP are the parameters that should be negotiated with the peer end before modification. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The SCTP port number is the parameter that should be negotiated with the peer end before modification. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Services carried on the E1/T1 link The loopback keeps interrupting the services until it is cancelled.
If the parameter is set to
REMOTE_LOOP or
LOCAL_LOOP, the
services on this link may be
interrupted until the link
loopback is cancelled.
If the uplink is beared by
IMAGRP, the IMAGRP
must be reset after the
loopmode is cancelled.
Otherwise, the IMAGRP
will be destroied, and
cannot bear new service.
Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
IP Path Less than 5 minutes The logic port must exist. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
The SCTP link works as the server and the upper-layer application is M3UA signaling service. The services are interrupted until the SCTP link is working normally. The parameter modification should be negotiated with the peer end, and after modification, the RNC should be reset. It is recommended that this parameter should not be modified when the system is running. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
PPP link Interrupt the service until negotiate successfully again. This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
PPP link Interrupt the service until negotiate successfully again. This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved GPS record should be deleted before using this command. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter is used with the [MML]ADD MBMSALARMSERVICE[/MML] command to enable the no MBMS data check. If the [MML]ADD MBMSALARMSERVICE[/MML] specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
The value of this parameter
must fulfill the following
condition:
[PARA]McchAccessPeriod
Coef[/PARA] >
[PARA]McchRepPeriodCo
ef[/PARA].
Read & Write
Not involved Not involved
The value of this parameter
must fulfill the following
condition:
[PARA]McchModPeriodCo
ef[/PARA] >
[PARA]DRXCycleLenCoef
[/PARA] in [MML]ADD
CNDOMAIN[/MML].
Read & Write
Not involved Not involved
The value of this parameter
must fulfill the following
condition:
[PARA]McchAccessPeriod
Coef[/PARA] >
[PARA]McchRepPeriodCo
ef[/PARA].
Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved If the RAN Sharing Support and MOCN Support are both switched off,Redundant operators should be removed by [MML]RMV CNOPERATOR[/MML] and only one operator can exist. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The value of this parameter should be consistent with the peer one. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Services carried on the SCTP link The services are interrupted until the SCTP link is working normally.
If the SCTP link is set to
SERVER and the
application type is NBAP,
the working mode cannot be
changed to CLIENT.
For the SCTP link whose
application type is M3UA,
the working mode can be
modified only when the
upper-layer application is
deleted.
Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOUa/PEUa/UOIa/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved Modifying this parameter does not affect the existing SAAL link but may affect the SAAL link setup mode. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved
1. When the parameter is
set to OFF, the MR function
is disabled.
2. The modification of this
parameter has no impact on
the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter supports only ASCII code character set.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved 1. Set this parameter to ON if you want to use the RNC built-in cell broadcast function. 2. Do not set this parameter to ON when the RNC is connected to the CBS server. 3. The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter cannot be modified. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The modification may affect the interconnection. Read & Write
PPP link Interrupt the service until negotiate successfully again. The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
Not involved Not involved In order to modify this parameter, you must use the command [MML]STP IPCHK[/MML] first and [MML]STR IPCHK[/MML] next. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
The SCTP link works as the server and the upper-layer application is NBAP. The services are interrupted until the SCTP link is working normally. The parameter modification should be negotiated with the peer end, and after modification, the RNC should be reset. It is recommended that this parameter should not be modified when the system is running. Read & Write
Not involved Not involved If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. Read & Write
Not involved Not involved If the transport type of the NodeB is IUB-IP, the next hop IP address must be one of the following configured addresses: PPP link peer IP address, MLPPP group peer IP address, and the IP address in the same network segment as that of the FE/GE port. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable. Read & Write
Not involved Not involved The IP address of the NodeB cannot be the one already configured for other NodeBs. It cannot be the same as the IP address already configured in the RNC. If the IP address of the NodeB is incorrect, the OM channel will be unavailable. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Less than 10 minutes After this parameter is modified, the RNC must be reset to take effect. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of NMO is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to PS_DOMAIN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to ON, or the value of [PARA]PsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX, SUPP_MOCN or SUPP_IUFLEX_MOCN, the settings of NNSfTmr is valid.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved Before modifying the NodeB to a version of R4 or earlier, deactivate the HSUPA and HSDPA functions of this NodeB. Before modifying the NodeB to a version of R5 or earlier, deactivate the MBMS function of the NodeB.Before modifying the NodeB to a version of R6 or earlier, deactivate the EFACH function of the NodeB. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC The services are interrupted until the signaling point is available. After modification, the RNC should be reset. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When the value of [PARA]CsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX or SUPP_IUFLEX_MOCN, or the value of [PARA]PsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX or SUPP_IUFLEX_MOCN, NullNRI must be configured.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The settings of the local end and the peer end should be consistent. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Service not interrupted, but CPU will be high This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter is modified according to actual networking. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Service not interrupted, but CPU will be high This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The local IP address and the peer IP address must be in the same network segment, and the peer IP address cannot be the same as the local IP address in the RNC. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The addresses of both ends of the SCTP are the parameters that should be negotiated with the peer end before modification. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The addresses of both ends of the SCTP are the parameters that should be negotiated with the peer end before modification. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. The SCTP port number is the parameter that should be negotiated with the peer end before modification. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When the network is in poor running status, the detection period cannot be set to a small value. If the value is too small, the path status may be affected. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
PPP link Interrupt the service until negotiate successfully again. Modify this parameter will cause failure in negotiation. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Port The time between deactivate and activate the port. This parameter cannot be modified. Read & Write
Port The time between deactivate and activate the port. This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This IP path must be already configured. Before modify, the IPPM of the IPPATH should be deactivate and activate again. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Port The time between deactivate and activate the port. This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifying this parameter does not affect the existing SAAL link but may affect the next setup of the SAAL link. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The IP address of the DHCP server must be one of the following addresses configured for the FG2a/GOUa/PEUa/UOIa/POUa: equipment IP address, Ethernet port IP address, PPP link local IP address, and MLPPP group local IP address. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter can be added or modified but cannot be removed. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved Modifying this parameter may affect the routing priority when there are multiple routes to the same destination signaling point. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved
All the switches have
multiple choices. SELECT
ALL means turning on all
the switches; CLEAR ALL
means turning off all the
switches; GRAYED ALL
means keeping the original
states of all the switches. If
the
SYS_INFO_UPDATE_FO
R_IU_RST switch is turned
off, the
BARRED_CELL_FOR_CS
DOMAIN_RST switch is
invalid.The parameter
modification has no impact
on the equipment.
When the parameter
RNCAP_IMSI_HO_SWIT
CH is set to 1, the
SNA_RESTRICTION_SWI
TCH check box under the
Handover algorithm switch
parameter in the MML
command SET
CORRMALGOSWITCH
cannot be selected at the
same time.
Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The settings of PsInfoUpdFlag is valid only when the value of [PARA]PsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX or SUPP_IUFLEX_MOCN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The settings of PsInfoUpdTmr is valid only when the value of [PARA]PsInfoUpdFlag[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to ON.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R5 or any later version,
PsNriCfgMode may be set
to SUPP_IUFLEX.The
parameter modification has
no impact on the
equipment.
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R6 or any later version,
PsNriCfgMode may be set
to SUPP_MOCN or
SUPP_IUFLEX_MOCN.Th
e parameter modification
has no impact on the
equipment.
Read & Write
Not involved Not involved The settings of PSNRILength is valid only when the value of [PARA]PsNriCfgMode[/PARA] in [MML]SET OPERATORCFGPARA[/MML] is set to SUPP_IUFLEX, SUPP_MOCN or SUPP_IUFLEX_MOCN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The first byte in the IP address of the NodeB FE port cannot be 0 or 127, or the IP address cannot be a broadcast or multicast address. The IP address of the NodeB FE port and the internal network address of the BAM cannot belong to the same network segment, or the network segments that they belong to cannot contain each other. The IP address of the NodeB FE port cannot be the same as the IP address already configured in the RNC. Read & Write
Not involved Not involved The first byte in the IP address of the NodeB FE port cannot be 0 or 127, or the IP address cannot be a broadcast or multicast address. The IP address of the NodeB FE port and the internal network address of the BAM cannot belong to the same network segment, or the network segments that they belong to cannot contain each other. The IP address of the NodeB FE port cannot be the same as the IP address already configured in the RNC. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved When this parameter is set to CS1, the local end of the RNC uses the protocol version of CS1 to interconnect with this adjacent node; when this parameter is set to CS2, the local end of the RNC uses the protocol version of CS2 to interconnect with this adjacent node. CS2 is backward compatible with CS1 and therefore it is recommended that the default value be set to CS2. The protocol version has to be set to CS1 only when the peer end is incompatible with the CS2 message from the local end (that is, the peer end does not handle the compatible domain in compliance with the protocol). Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The value of RafcTmr can be negotiated with the value of [PARA]RatcTmr[/PARA] in [MML]SET IUTIMERANDNUM[/MML]; thus, the RNC can successfully initiate the reset before the CN reset response timer expires.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved If the RAN Sharing Support and MOCN Support are both switched off,Redundant operators should be removed by [MML]RMV CNOPERATOR[/MML] and only one operator can exist. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The value of RatcTmr can be negotiated with the value of [PARA]RafcTmr[/PARA] in [MML]SET IUTIMERANDNUM[/MML]; thus, the CN can successfully initiate the reset before the RNC reset response timer expires.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the corresponding waiting response timer for UE reconfiguration does not work. (For example, when the channel change form DCH to FACH or the channel change from FACH to DCH, the timer does not work.) The retransmit timer is 2 second. The RB reconfiguration message may retransmit three times when the timer expires.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the corresponding waiting response timer for UE release does not work. (For example, when the channel change form DCH to FACH or the channel change from FACH to DCH, the timer does not work.) The retransmit timer is 2 second. The RB reconfiguration message may retransmit three times when the timer expires.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the corresponding waiting response timer for UE setup does not work. (For example, when the channel change form DCH to FACH or the channel change from FACH to DCH, the timer does not work.) The retransmit timer is 2 second. The RB reconfiguration message may retransmit three times when the timer expires.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Less than 5 minutes When you set the clock source for the AEUa and the PEUa, the link number can be 0 to 31; for the AOUa, the link number can be 0 or 1; for the UOIa, the link number can be 0 to 3. Read & Write
RNC Not involved When you set the clock source for the AEUa and the PEUa, the link number can be 0 to 31; for the AOUa, the link number can be 0 or 1; for the UOIa, the link number can be 0 to 3. Read & Write
RNC Less than 5 minutes This parameter cannot be modified. Read & Write
RNC Less than 5 minutes This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
AAL2 Path Less than 5 minutes The parameter modification has no impact on the equipment. Read & Write
AAL2 Path Less than 5 minutes The resource group must exist. Read & Write
IP Path Less than 5 minutes The resource group must exist. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifying this parameter may affect the sensitivity of SAAL link detection. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved After modification, the RNC should be reset. When a single link is routed to a signaling point, do not enable this switch. The restart procedure is performed when a signaling point is unavailable. For details, refer to ITU-T Q704. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 1. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 10. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 2. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 3. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 4. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 5. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 6. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 7. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 8. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Change this parameter will impact the function interrelated with Parameter 9. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Port If the mode is not consistent, will interrupt service until it is consistent. The value of this parameter should be consistent with the peer one. Read & Write
RNC The services are interrupted until the related M3DE is available. The negotiation with the peer end is required. It is recommended that this parameter should not be modified during network operation. Read & Write
Not involved Not involved The modification of RTCPBWRatio is valid only when [PARA]RTCPSwitch[/PARA] in [MML]ADD CNNODE[/MML] is set to ON.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of RTCPSwitch is valid only when [PARA]TnlBearerType[/PARA] in [MML]ADD CNNODE[/MML] is set to IP_TRANS.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Related traffic record indexes must be already configured. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
NodeB Less than 5 minutes For the Iub adjacent node, the SAAL link should stay in the same subsystem as the NodeB. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved [MML]SET MRSCOPECTRL[/MML] is run to specify whether to allow the output of MR log of a cell in this RNC. This command can be run for configuring only a certain cell. For convenience, the following values are set for this parameter: ByRack, ByNodeBId, and ByCellId. ByRack means configuring all the cell in a subrack. ByNodeBId means configuring all the cell controlled by a NodeB. ByCellId means configuring a certain cell.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The scramble switch should be consistent with the interconnected one. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Interrupt the service until the parameter is correctly set.
1.You can set the DST start
date or end date by setting
the StartType or EndType
parameter to
"DATEWEEK" type. In this
case, you must set the
benchmark day to (n - 6) or
earlier, where n represents
the last day of the month.
For example, in October,
you must set the benchmark
day to 25 (= 31 - 6) or
earlier. If you set the date to
"Tuesday in or after
Oct.26", it is invalid in year
2005 for the date exceeds
the month scope while in
year 2006 it is October 31, a
valid day. Therefore, you
must abide this
specification to ensure the
setting is valid in each year.
2. When you set a
customized daylight saving
time, you cannot set the
start date or end date of the
daylight saving time to
February 29 by setting the
StartType or EndType
parameter to the DATE
type. The reason is that the
local time cannot be
translated to the daylight
saving time in a leap year
Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The negotiation will be successful only when the parameter is set the same with the local and peer device. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The source IP address must be one of the following addresses: PPP link local IP address of the PEUa/POUa/POS, MLPPP group local IP address of the PEUa/POUa, Ethernet port IP address of the FG2a/GOUa, and equipment IP address, the Trunk IP address of the FG2a/GOUa board. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Less than 10 minutes After this parameter is modified, the RNC must be reset to take effect. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Services carried on PVC Not involved This parameter cannot be modified. Read & Write
Not involved Service not interrupted, but CPU will be high This parameter cannot be modified. Read & Write
Not involved Not involved When the loopback type is changed to REMOTE_LOOP or LOCAL_LOOP, the services will be interrupted until the loopback is cancelled.When the optical port is set to LOCAL_LOOP, it can not be set to REMOTE_LOOP directly. You should set to NO_LOOP first before set to REMOTE_LOOP. It is the same when set from REMOTE_LOOP to LOCAL_LOOP. Read & Write
Not involved Not involved The standby port does not support the PING IP function. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The priority of the corresponding service will be interrupt if the DSCP of the port's queue is modified. Read & Write
Not involved Not involved If a link is used, you cannot convert the link from E1 to T1, or from T1 to E1. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Inhibition period of the boardOnly the active board can be logically inhibited when you set the logical slot number of the active board. If an active board is logically inhibited, neither active board nor standby board can be physically inhibited. If the active board or the standby board is physically inhibited, it cannot be logically inhibited. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved
1. This command is used
for the AOUa and the
POUa.
2. This command is used
only when Huawei
equipment is interconnected
with the equipment of other
vendors.
Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC The services are interrupted until the signaling point is available. After modification, the RNC should be reset. Read & Write
RNC The services are interrupted until the signaling point is available. After modification, the RNC should be reset. Read & Write
RNC The services are interrupted until the signaling point is available. After modification, the RNC should be reset. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Less than 10 minutes After this parameter is modified, the RNC must be reset to take effect. Read & Write
Not involved Not involved This parameter must be consistent with the peer equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Before enabling load sharing, you need to set the [PARA]RNC_SHARE_SWITCH[/PARA] switch in [MML]SET RRCTRLSWITCH[/MML] to ON.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved One clock source can only with one priority, otherwise it is the same. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved One clock source can only with one priority, otherwise it is the same. One backplane 8K outClock can only has one clock source. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Less than 5 minutes None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Less than 5 minutes If the interface board clock source of the RSS subrack is set, you can set the 8 kHz output clock source. If the interface board clock source of the RBS subrack is set, you cannot set the 8 kHz output clock source for the backplane. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
RNC Less than 10 minutes After this parameter is modified, the RNC must be reset to take effect. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved None Read & Write
Not involved Not involved
When
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R99, SupportCRType is
CR527_SUPPORT or
CR527_NOT_SUPPORT;
when
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R4, SupportCRType is
CR528_SUPPORT or
CR528_NOT_SUPPORT;
when
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R5, SupportCRType is
CR529_SUPPORT or
CR529_NOT_SUPPORT;
when
[PARA]CNProtclVer[/PAR
A] in [MML]ADD
CNNODE[/MML] is set to
R6, there is no
SupportCRType.
The parameter modification
has no impact on the
equipment.
Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The modification of Switch3GPP25415CR0125 is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD CNNODE[/MML] is set to CS_DOMAIN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter is based on actual networking. Read & Write
Not involved Not involved This parameter is based on actual networking. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 1. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 10. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 2. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 3. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 4. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 5. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 6. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 7. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 8. Read & Write
Not involved Not involved Change this parameter will impact the patch function controlled by switch 9. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved T302 broadcast in the SIB1 = Roundup {[timer 302 [ms]] + 2 x [Iub transmission delay]}. [timer 302 [ms]] is configured through the SET CONNMODETIMER command. [Iub transmission delay] is the Iub transmission delay configured through the ADD NodeB command. Roundup means rounding up and mapping to a value of the set {100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, 8000 ms}.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The modification of T3212 is valid only when [PARA]CNDomainId[/PARA] in [MML]ADD CNDOMAIN[/MML] is set to CS_DOMAIN.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
AAL2 Path Less than 5 minutes The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This TRMMAP must be already configured. Read & Write
Not involved Not involved This TRMMAP must be already configured. Read & Write
Not involved Not involved This TRMMAP must be already configured. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Not involved The parameter modification has no impact on the equipment. Read & Write
NodeB The services are interrupted until the cell is activated again. Before modifying this parameter, deactivate all the cells under this NodeB. Read & Write
Not involved Not involved Set TnlBearerType according to the actual used transport type.The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved Set TnlBearerType according to the actual used transport type.The parameter modification has no impact on the equipment. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Cell Less than 5 minutes The loopback test may interrupt the services carried on this link. Read & Write
Not involved Not involved When the BT is AEUa and the LNKT is E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME,you could set 16TimeSlot Switch. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Subsystem Less than 10 minutes This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
ETHPORT/VP/LGCPORT etc. If the mode is not set back, will interrupt service until it is set back. This parameter cannot be modified. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Cell The services are interrupted until the cell is activated again. The cell should be deactivated in advance. Read & Write
Not involved Not involved The modification of the timer involves the peer end. For details, refer to ITU-T Q2630.1/ITU-T Q2630.2. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved When this parameter is modified, the corresponding NodeB must be already configured with an ESN. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
AAL2 Path Less than 5 minutes The configuration data must be consistent with that of the peer end. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Services that the SCTP link bears The services are interrupted until the SCTP link is working normally. This parameter is based on actual networking. Read & Write
Not involved Not involved If the setting is incorrect, the destination IP address may be unavailable. Read & Write
Not involved Not involved Modify the relationship between VLAN and DSCP may interfere the network. Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifying this parameter may affect the adjacent node configured with TRMMAP. After the modification succeeds, this parameter is valid on the following two occassions: 1) Access of a new user 2) Bandwidth modification for the existing user Read & Write
Not involved Not involved Modifiying this parameter will affect the rule of admitting new traffic(the sequence of choosing path type). Read & Write
Not involved Not involved Modifiying this parameter will affect the adjacent node configured with this factor table. After the modification succeeds, this parameter is valid on the following two occasions: 1. Access of a new user 2. Bandwidth modification for the existing user Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved None Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
AAL2 Path Less than 5 minutes The configuration data must be consistent with that of the peer end. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved None Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved For parameter modification, refer to ITU-T Q.2110. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved To convert a link from E1 to T1 or from T1 to E1 on the AOUa/POUa, you should reset the board. Read & Write
Not involved Not involved This parameter cannot be modified. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
Not involved Not involved The parameter modification has no impact on the equipment. Read & Write
RNC Interrupt the service until the parameter is correctly set. The parameter cannot be modified. Read & Write
Attribute Introduced in Version
Transport RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Equipment RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Equipment RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Radio RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Equipment Versions earlier than RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Radio RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Transport RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Equipment RAN11.0
Transport Versions earlier than RAN11.0
Transport RAN11.0
Radio RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Equipment RAN11.0
Radio Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Equipment Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Transport Versions earlier than RAN11.0
Radio Versions earlier than RAN11.0
Radio RAN11.0
Equipment Versions earlier than RAN11.0

Vous aimerez peut-être aussi