Keywords ZigBee Module Specifications Summary Shuncom Technology SZ05-L-PRO ZigBee module has the characteristics and advantages of long communication distance, strong anti-jamming capability, flexible network and stable performance. It can achieve point-to-point, multipoint, multi-multipoint transparent data transmission between devices by self-organizing star, mesh network. User Manual Model[SZ05-L-PRO] ZigBee Data Communication Module Version1.1 2013/8/20
Copyright 2004-2013 SHUNCOM www.shuncom.com SZ05-L-PRO ZigBee Data Communication Module V1.1 The 1 Page Copyright Notice This manual contains all the contents protected by copyright laws, without the written authorization of our Shanghai Electronic Technology Co., Ltd., any organization or individual have no right in any form or by any means to copy or reprint the parts or the entire content of this manual. Our Company reserves the rights of modification, interpretation and publication of this manual before the absence of any prior declaration.
Version Notice Version Date Creator Reason V1.0 2012/1/1 Sara.Chen New File V1.1 2013/8/20 Sara.Chen Modify
Copyright 2004-2013 SHUNCOM www.shuncom.com SZ05-L-PRO ZigBee Data Communication Module V1.1 The 2 Page Catalogue I Introduction .............................................................................................................................................. 3 II Picture ....................................................................................................................................................... 3 III Key Features ............................................................................................................................................. 3 IV Specifications ............................................................................................................................................ 4 V Configuration ........................................................................................................................................... 5 VI Support ..................................................................................................................................................... 6
Copyright 2004-2013 SHUNCOM www.shuncom.com SZ05-L-PRO ZigBee Data Communication Module V1.1 The 3 Page I Introduction
1. Shuncom Technology SZ05-L-PRO ZigBee module has the characteristics and advantages of long communication distance, strong anti-jamming capability, flexible network and stable performance. It can achieve point-to-point, multipoint, multi-multipoint transparent data transmission between devices by self-organizing star, mesh network. 2. It can be divided into three nodes in the network: Coordinator, Router and End-Device. The Coordinator is the central nodes which can automatically initiate maintain and manage the information of the network. The Router takes the charge of liking network together, transmitting the data and associating with other routers and End-devices. And the terminal nodes only send and receive the data. Coordinator, a router and end device, they are the same in hardware but the embedded software is different. Software configuration can realize the different functions of devices. 3. Shuncom SZ05-L-PRO wireless module had been widely applied in industry wireless monitoring communication, such as wireless sensor data acquisition, smart home, internet of things, wireless streetlight control, smart grid, wireless automatic meter reading, wireless automatic traffic.
II Picture
III Key Features Zigbee protocol: stable and reliable ZigBee protocol stack embedded Easy to use: can be embedded into users device Reliable network: Wide communication range and high network reliability Strong wireless router function: support Multi hop Long distance: 800m line-of-sight. Strong anti-jamming: ISM (Industrial, Scientific & Medical) 2.4 GHz frequency band Flexible serial Port: Baud Rate can be set from 1200 to 115200. Transmission mode: broadcast or target address to send data can be selected Node type: coordinator, router or end device can be set Strong self-organizing network: star, mesh
Copyright 2004-2013 SHUNCOM www.shuncom.com SZ05-L-PRO ZigBee Data Communication Module V1.1 The 4 Page Channels: 16 Direct Sequence Channels. 65535 PAN ID to be selected.
IV Specifications
Wireless communication Distance 800m line-of-sight Network Star, Mesh Addressing IEEE802.15.4/ ZigBee standard addressing Anti-collision CSMA-CA and GTS CSMA-CA Data interface Max packet 100 bytes Interface TTL/IO Signal line TxD, RxD, GND Baud rate 1200bps ~ 115200 bps Parity None, Even or Odd Data bit 7 or 8 Stop bit 1 RF modem Modulation DSSS (O-QPSK) Frequency 2.405GHz~ 2.480GHz Power supply DC5V Channel 16 RX sensitivity -92dBm RF bandwidth 250kbps RF power out 18dBm Antenna PCB Power Peak current 180mA Average current 58mA Hibernate current 5uA Average power 0.3W Operational Conditions Working temperature -40C ~ 85C Storage temperature -55C ~ 125C Size 48mm*27mm ( length*width)
Copyright 2004-2013 SHUNCOM www.shuncom.com SZ05-L-PRO ZigBee Data Communication Module V1.1 The 5 Page V Configuration 1. Connecting to the computer Put SZ05-L-PRO mount into the ZigBee Converter board and Evaluation board, then connect the ZigBee evaluation board to computer.
2. Entering into the configuration mode as follows: 1).Open the Software SSCOM32 English Choose right serial port and the configuration is Baud rate: 38400, Data Bit: 8, parity: NONE, Stop Bit: 1, Flow: NONE 2). Power on. 3). Press CFG for 3 seconds. 4). Alarm light and run light flash at the same time, which means Module is on configuration mode.
Copyright 2004-2013 SHUNCOM www.shuncom.com SZ05-L-PRO ZigBee Data Communication Module V1.1 The 6 Page Tips: About how to do the configuration, we will provide the configuration manual to you for reference when you buy this module. 5).Default Configuration
Tips: The module will be out of the configuration mode when there is no more operation within 60 seconds. All the settings will stay unchanged. 3. The tips for the configuration The coordinators MAC address is 0000. The MAC address of the non-coordinators (router and end device) can be set optionally from 0001 to FFFE, but the routers MAC addresses must be different in the same network, or else they cannot communicate. Each network is defined with a unique Channel and Net ID. The channel and the Net ID must be the same in the unique network. And the baud rate, parity, data bit should be consistent with the connected devices 4. Notes: (1) Power supply is voltage DC5V. (2) Module is not waterproof and not lightning protection. (3) The anode and cathode of power do not reversed, otherwise it will burn out the module. (4) Module should be installed in anti- static environment, the antenna should be kept away from the metal objects. VI Support Tel+86-21-33933988/78/68/58/28/18 M.B+86-159-2133-2199 Fax+86-21-33933968-6808 Zip210213 Email6822@shuncom.com 6835@shuncom.com Websitewww.shuncom.com Add8/F, No.4 building, No.3000 Longdong Avenue, Pudong New Area, Shanghai, China.