Académique Documents
Professionnel Documents
Culture Documents
Safety recommendations
1. Application
The SKF LAGG 18A is a mobile, air operated grease pump suitable for
18 kg drums with any greases of an NLGI class 0, 1 or 2.
2. Description
The pneumatically operated grease pump is fully automatic. By
operating the grease gun handle the grease will automatically
discharged.
As soon as the handle is released the grease discharge is automatically
stopped.
For full mobility the grease pump is placed on a specially developed
trolley.
Note: It is recommended to include a pressure valve in the air inlet.
This will increase the working life of the grease pump mechanism.
3. Technical data
Maximum pressure air inlet :
Minimum pressure air inlet
:
Pressure ratio
:
Maximum output pressure
(with 8 bars air inlet pressure) :
Suitable grease
:
Suitable drum dimensions
- inside diameter
:
- max. inside height
:
Air quick connection nipple
:
Length of hose
:
Weight
:
4. Replacement parts
Replacement parts available on request.
5. Operating instructions
5. Insert the piston rod of the pump mechanism through the cover
plate and the follower plate. Assure that the piston rod penetrates all
the way to the bottom of the drum.
6. Secure the piston rod to the cover plate by tightening the clamp
screw.
7. Assemble the trolley and put the grease keg on the triangular base.
8. Connect the trolley bar members around the square trolley rod and
the piston rod.
9. Attach the handle and secure it in position by means of the clamp
screw.
6. After use
1. Disconnect the air inlet hose.
2. Release the air pressure from the grease pump by operating the
grease gun handle.
3. Assure that after use the grease is discharged in an environmentally
friendly way.
MP557E/1999.04