Académique Documents
Professionnel Documents
Culture Documents
Comp MTD1
1/9/02
5:10 PM
Page 1
SCIENTIFIC
COLUMBUS
SCIENTIFIC COLUMBUS
Headquarters
Rochester Factory
50 Fordham Road
Wilmington, Massachusetts 01887
Tel: 978-988-4101
Fax: 978-988-4179
Email: power.industrial@ametek.com
2 Queens Drive
Kings Norton Business Centre
Birmingham B30 3HH England
Tel: +44 121 246 2260
Fax: +44 121 246 2270
W W W. S C I E N T I F I C C O L U M B U S . C O M
Ametek Transducer
Comp MTD1
1/9/02
5:11 PM
Page 2
Power
Measurement
You Can
Rely On.
AMETEK Power Instruments is
Our Products
Digital Power Measurement
Fully programmable
digital and analog transducers
with built-in communications.
SCIENTIFIC COLUMBUS
The Scientific Columbus name is
renown for quality and dependability
in energy meters, electrical transducers
and calibration standards. Power mea-
Electrical Transducers
Power-measurement
transducers are ideal for
power panels, switchgear,
and plant process control.
Calibration Standards
Laboratory and portable
field standards provide
high-accuracy calibration
for meters and transducers.
Power Instrumentation
Measurement devices
developed for specific
applications to provide
electrical isolation,
conversion, and alarms.
Technical Training
Training courses conducted
by qualified instructors are
available to assist you in
getting the highest
performance from
your products.
Ametek Transducer
Comp MTD1
1/9/02
5:11 PM
Page 2
Power
Measurement
You Can
Rely On.
AMETEK Power Instruments is
Our Products
Digital Power Measurement
Fully programmable
digital and analog transducers
with built-in communications.
SCIENTIFIC COLUMBUS
The Scientific Columbus name is
renown for quality and dependability
in energy meters, electrical transducers
and calibration standards. Power mea-
Electrical Transducers
Power-measurement
transducers are ideal for
power panels, switchgear,
and plant process control.
Calibration Standards
Laboratory and portable
field standards provide
high-accuracy calibration
for meters and transducers.
Power Instrumentation
Measurement devices
developed for specific
applications to provide
electrical isolation,
conversion, and alarms.
Technical Training
Training courses conducted
by qualified instructors are
available to assist you in
getting the highest
performance from
your products.
DPMS
Contents
Page
6-9
6
7
8
9
10-29
Watt or Var
Combined Watt/Watthour
Combined Var/Varhour
Volt-Amp
Combined Volt-Amp/Volt-Amphour
10-15
16-23
16-23
24-29
24-29
Current or Voltage
Harmonics
Transducer Accuracy
Watt or Var
Combined Watt/Var
Analog Totalizers
Combined Watt/Watthour
Combined Var/Varhour
Phase Angle (Power Factor)
Phase Angle or Voltage Angle
Frequency
Temperature
31-40
36
41
42-47
48-52
53
54-61
54-61
62-67
68-71
72-75
76-79
99-108
Introduction
Current or Voltage
Watt or Var
Combined Watt/Var
99
100-102
103-105
106-108
Instrumentation
110-125
DC Watt Transducer
DC Voltage Isolation Amplifier
DC Instrument Amplifier
Analog-to-Pulse Converter
Registers
Calibrator
110-111
112-115
116-117
118-121
122-123
124-125
Reference
126-137
Case Dimensions
Glossary
Special Options & Abbreviations
AC & Calibration Formulas
Terms & Conditions
126-127
128-131
132
133
134
Phone: 1-800-274-5368
30
80
109
Reference
JEM10 Meter
DM-10 Demand Manager
SC-30 Field Standard
Instrumentation
31-79
81
82-88
89
90-91
92-97
98
98
XLG
Exceltronic Transducers
(Accuracy to 0.2% of Reading)
Introduction
Specifications
Enclosure Drawings
Ordering Procedure
Wiring Diagrams
Test Equipment
JEM Multifunction Transducer
XLP Plug-In
Digilogic Transducers
(Accuracy to 0.1% of Reading)
Exceltronic
4-5
1
2-3
Page
Digilogic
Contents
Fax: 585-454-7805
1
SCI Transducer Cat. 1-51(MTD)
1/9/02, 5:21 PM
SCIENTIFIC
Meeting Your Accuracy, Output, and Bud
COLUMBUS
Scientific Columbus offers four dedicated
lines of transducers that give you flexibility
for meeting your power-measurement needs.
Metal Cans:
Technical Support
and Applications
Assistance 1-800-274-5368
Transducer Functions
Available:
Current
Voltage
Phase Angle
(Power Factor)
Phase Angle
Voltage Angle
Frequency
Temperature
Maintenance, Rentals,
and Calibration Services
Available
Easy
Installation:
Keyhole slots make
the unit
easy to install
and remove in
the back of
panels or tight
corners.
Sturdy
Construction:
Call 1-800-274-5368 for product information on our
complete line of modular signal conditioners and alarms.
2
2-3
Watt
Var
Watt/Var
Watt/Watthour
Var/Varhour
Volt-Amp
Volt-Amp/VoltAmphour
3
1/9/02, 5:21 PM
SCIENTIFIC
Meeting Your Accuracy, Output, and Bud
COLUMBUS
Scientific Columbus offers four dedicated
lines of transducers that give you flexibility
for meeting your power-measurement needs.
Metal Cans:
Technical Support
and Applications
Assistance 1-800-274-5368
Transducer Functions
Available:
Current
Voltage
Phase Angle
(Power Factor)
Phase Angle
Voltage Angle
Frequency
Temperature
Maintenance, Rentals,
and Calibration Services
Available
Easy
Installation:
Keyhole slots make
the unit
easy to install
and remove in
the back of
panels or tight
corners.
Sturdy
Construction:
Call 1-800-274-5368 for product information on our
complete line of modular signal conditioners and alarms.
2
2-3
Watt
Var
Watt/Var
Watt/Watthour
Var/Varhour
Volt-Amp
Volt-Amp/VoltAmphour
3
1/9/02, 5:21 PM
The Element
When selecting a transducer, first determine the number of
operating elements required. An element is an electronicmultiplier circuit that accepts voltage and current signals and
generates an output signal proportional to the vector product
of the two inputs. When one input is proportional to line
voltage and the other to line current, the output signal
becomes an analog of real power (watts = EI cos()).
1 Element
From
To
11/2 or 2 Element
From
To
21/2 or 3 Element
From
To
Secondary Calibration
Transducer output is related to the voltage and current
inputs applied directly to the transducer input terminals.
Primary Calibration
Transducer output is related directly to the line voltage
and currents out at the load. This method includes the
effects of potential and current transformers between
the load and the input to the transducer.
120 V
120 V
120 V
120 V
120 V
120 V
120 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
90
225
450
675
900
1350
2250
180
450
900
1350
1800
2700
4500
180
450
900
1350
1800
2700
4500
360
900
1800
2700
3600
5400
9000
270
675
1350
2025
2700
4050
6750
540
1350
2700
4050
5400
8100
13500
240 V
240 V
240 V
240 V
240 V
240 V
240 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
180
450
900
1350
1800
2700
4500
360
900
1800
2700
3600
5400
9000
360
900
1800
2700
3600
5400
9000
720
1800
3600
5400
7200
10800
18000
540
1350
2700
4050
5400
8100
13500
1080
2700
5400
8100
10800
16200
27000
480 V
480 V
480 V
480 V
480 V
480 V
480 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
360
900
1800
2700
3600
5400
9000
720
1800
3600
5400
7200
10800
18000
720
1800
3600
5400
7200
10800
18000
1440
3600
7200
10800
14400
21600
36000
1080
2700
5400
8100
10800
16200
27000
2160
5400
10800
16200
21600
32400
54000
Circuit Configuration
3 phase, 4 wire
3 phase, 4 wire
(balanced voltage*)
3 phase, 3 wire
3 phase, 3 wire
(balanced voltage & load**)
1 phase, 2 wire
Elements Required
3
2 1/2
2
1 1/2
1
* The individual phase-to-phase voltages have the same magnitude and equal
phase displacement.
** The individual phase currents have the same magnitude and equal phase
displacement.
90
225
450
675
900
1350
2250
90
225
450
675
900
1350
2250
180
450
900
1350
1800
2700
4500
135
337.5
675
1012.5
1350
2025
3375
270
675
1350
2025
2700
4050
6750
Nominal Input
Voltage
Current
Cal. Watts
(or Vars)
0
0
500 W
(or Vars)
1000 W
(or Vars)
Phone: 1-800-274-5368
Fax: 585-454-7805
1 Element
From
To
11/2 or 2 Element
From
To
21/2 or 3 Element
From
To
69 V
69 V
69 V
69 V
69 V
69 V
69 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
30
75
150
225
300
450
750
90
225
450
675
900
1350
2250
60
150
300
450
600
900
1500
180
450
900
1350
1800
2700
4500
90
225
450
675
900
1350
2250
270
675
1350
2025
2700
4050
6750
120 V
120 V
120 V
120 V
120 V
120 V
120 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
60
150
300
450
600
900
1500
180
450
900
1350
1800
2700
4500
120
300
600
900
1200
1800
3000
360
900
1800
2700
3600
5400
9000
180
450
900
1350
1800
2700
4500
540
1350
2700
4050
5400
8100
13500
240 V
240 V
240 V
240 V
240 V
240 V
240 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
120
300
600
900
1200
1800
3000
360
900
1800
2700
3600
5400
9000
240
600
1200
1800
2400
3600
6000
720
1800
3600
5400
7200
10800
18000
360
900
1800
2700
3600
5400
9000
1080
2700
5400
8100
10800
16200
27000
480 V
480 V
480 V
480 V
480 V
480 V
480 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
240
600
1200
1800
2400
3600
6000
720
1800
3600
5400
7200
10800
18000
480
1200
2400
3600
4800
7200
12000
1440
3600
7200
10800
14400
21600
36000
720
1800
3600
5400
7200
10800
18000
2160
5400
10800
16200
21600
32400
54000
4
SCI Transducer Cat. 1-51(MTD)
45
112.5
225
337.5
450
675
1125
Output in mAdc
Transducer Terminology
The label on a toaster, power drill, or radio might read,
for use on 120 Vac, and the actual measured voltage at
the wall socket is 114.2 Vac. The device works because the
120 Vac statement is a nominal, or general-case value.
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
69 V
69 V
69 V
69 V
69 V
69 V
69 V
Phone: 1-800-274-5368
Fax: 585-454-7805
5
4-5
1/9/02, 5:21 PM
The Element
When selecting a transducer, first determine the number of
operating elements required. An element is an electronicmultiplier circuit that accepts voltage and current signals and
generates an output signal proportional to the vector product
of the two inputs. When one input is proportional to line
voltage and the other to line current, the output signal
becomes an analog of real power (watts = EI cos()).
1 Element
From
To
11/2 or 2 Element
From
To
21/2 or 3 Element
From
To
Secondary Calibration
Transducer output is related to the voltage and current
inputs applied directly to the transducer input terminals.
Primary Calibration
Transducer output is related directly to the line voltage
and currents out at the load. This method includes the
effects of potential and current transformers between
the load and the input to the transducer.
120 V
120 V
120 V
120 V
120 V
120 V
120 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
90
225
450
675
900
1350
2250
180
450
900
1350
1800
2700
4500
180
450
900
1350
1800
2700
4500
360
900
1800
2700
3600
5400
9000
270
675
1350
2025
2700
4050
6750
540
1350
2700
4050
5400
8100
13500
240 V
240 V
240 V
240 V
240 V
240 V
240 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
180
450
900
1350
1800
2700
4500
360
900
1800
2700
3600
5400
9000
360
900
1800
2700
3600
5400
9000
720
1800
3600
5400
7200
10800
18000
540
1350
2700
4050
5400
8100
13500
1080
2700
5400
8100
10800
16200
27000
480 V
480 V
480 V
480 V
480 V
480 V
480 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
360
900
1800
2700
3600
5400
9000
720
1800
3600
5400
7200
10800
18000
720
1800
3600
5400
7200
10800
18000
1440
3600
7200
10800
14400
21600
36000
1080
2700
5400
8100
10800
16200
27000
2160
5400
10800
16200
21600
32400
54000
Circuit Configuration
3 phase, 4 wire
3 phase, 4 wire
(balanced voltage*)
3 phase, 3 wire
3 phase, 3 wire
(balanced voltage & load**)
1 phase, 2 wire
Elements Required
3
2 1/2
2
1 1/2
1
* The individual phase-to-phase voltages have the same magnitude and equal
phase displacement.
** The individual phase currents have the same magnitude and equal phase
displacement.
90
225
450
675
900
1350
2250
90
225
450
675
900
1350
2250
180
450
900
1350
1800
2700
4500
135
337.5
675
1012.5
1350
2025
3375
270
675
1350
2025
2700
4050
6750
Nominal Input
Voltage
Current
Cal. Watts
(or Vars)
0
0
500 W
(or Vars)
1000 W
(or Vars)
Phone: 1-800-274-5368
Fax: 585-454-7805
1 Element
From
To
11/2 or 2 Element
From
To
21/2 or 3 Element
From
To
69 V
69 V
69 V
69 V
69 V
69 V
69 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
30
75
150
225
300
450
750
90
225
450
675
900
1350
2250
60
150
300
450
600
900
1500
180
450
900
1350
1800
2700
4500
90
225
450
675
900
1350
2250
270
675
1350
2025
2700
4050
6750
120 V
120 V
120 V
120 V
120 V
120 V
120 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
60
150
300
450
600
900
1500
180
450
900
1350
1800
2700
4500
120
300
600
900
1200
1800
3000
360
900
1800
2700
3600
5400
9000
180
450
900
1350
1800
2700
4500
540
1350
2700
4050
5400
8100
13500
240 V
240 V
240 V
240 V
240 V
240 V
240 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
120
300
600
900
1200
1800
3000
360
900
1800
2700
3600
5400
9000
240
600
1200
1800
2400
3600
6000
720
1800
3600
5400
7200
10800
18000
360
900
1800
2700
3600
5400
9000
1080
2700
5400
8100
10800
16200
27000
480 V
480 V
480 V
480 V
480 V
480 V
480 V
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
240
600
1200
1800
2400
3600
6000
720
1800
3600
5400
7200
10800
18000
480
1200
2400
3600
4800
7200
12000
1440
3600
7200
10800
14400
21600
36000
720
1800
3600
5400
7200
10800
18000
2160
5400
10800
16200
21600
32400
54000
4
SCI Transducer Cat. 1-51(MTD)
45
112.5
225
337.5
450
675
1125
Output in mAdc
Transducer Terminology
The label on a toaster, power drill, or radio might read,
for use on 120 Vac, and the actual measured voltage at
the wall socket is 114.2 Vac. The device works because the
120 Vac statement is a nominal, or general-case value.
01 A
02.5 A
05 A
07.5 A
010 A
015 A
025 A
69 V
69 V
69 V
69 V
69 V
69 V
69 V
Phone: 1-800-274-5368
Fax: 585-454-7805
5
4-5
1/9/02, 5:21 PM
One Enclosure!
37 Measurements!
SCIENTIFIC
Digital Transducer
COLUMBUS
DPMS
SCIENTIFIC
Digital Power Measurement System
COLUMBUS
DPMS
Fully Programmable
Digital & Analog
Transducer with
Built-in Communications
Fully Programmable
Digital & Analog
Transducer
with Built-in Communications
SCIENTIFIC
COLUMBUS
DPMS
CHECK THE SPECS! You will find the DPMS to be highly accurate,
durable, flexible, and economical. The future of transducers has arrived,
and its the DPMS Digital Programmable Measurement System from
Rochester Instrument Systems, the world leader in transducer technology!
Phone: 1-800-274-5368
Fax: 585-454-7805
6
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
7
6-7
1/9/02, 5:22 PM
One Enclosure!
37 Measurements!
SCIENTIFIC
Digital Transducer
COLUMBUS
DPMS
SCIENTIFIC
Digital Power Measurement System
COLUMBUS
DPMS
Fully Programmable
Digital & Analog
Transducer with
Built-in Communications
Fully Programmable
Digital & Analog
Transducer
with Built-in Communications
SCIENTIFIC
COLUMBUS
DPMS
CHECK THE SPECS! You will find the DPMS to be highly accurate,
durable, flexible, and economical. The future of transducers has arrived,
and its the DPMS Digital Programmable Measurement System from
Rochester Instrument Systems, the world leader in transducer technology!
Phone: 1-800-274-5368
Fax: 585-454-7805
6
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
7
6-7
1/9/02, 5:22 PM
Communicate with
15 DPMS Units!
Fully Programmable
Digital & Analog Transducer with
Built-in Communications
DPMS-D
Additional Options:
Nominal voltage input: P2 = 277V
P3 = 480V
P4 = 69V.
Analog output option: A1 = 0-1mA
A2 = 4-20mA.
Power Requirements
95 to 256 VAC @ 50/60 Hz or DC
Mechanical
Panel cutout 4.38 x 3.75 inches
Weight 1.4 lbs. (0.64 kg.)
Programming Kit:
Environmental
Operating Temperature range: -20 to +70C
Storage Temperature: -40 to +85C
Humidity: 20 to 90% RH non condensing
RFI: no effect when subjected to 10 V/M @ 1 meter
ESD: IEC 801-2 level 3 (8 kV) with no damage
Surge Withstand: ANSI/IEEE C37.90, IEC 801-4 Class 4
Isolation: 2500 VAC RMS from power to Case or
Communications port1
Programmable Configuration
2 element for 3 phase 3 wire delta
2 1/2 element for 3 phase 4 wire wye
3 element for 3 phase 4 wire wye
Inputs
Current
Nominal 5 amps
Operating Range 0 to 10 amps
Burden per Element = 0.25 VA
Voltage Nominal 120 volts
Operating Range 85 to 150 volts
Optional: 69 VAC Nominal, Range
50-85 277 VAC Nominal, Range 180320 VAC 480 VAC Nominal, Range
310-550 VAC
Burden per Element: 0.05 VA
Frequency 45 to 65 Hertz
Sample Rate
128 Samples/Cycle
Power Supply
95 to 265 VAC @ 50/60 Hz or DC
6 VA Maximum @ 120 V
Outputs
3 Channel Analog:
All (3) channels are independently configured and scaled
with DPMSTalk software
Option A1: 0 to 1 ma, maximum 10 volt compliance
Option A2: 4 to 20 ma, maximum 12 volt compliance
Response Time </= 200 mS
6 Channel Digital Option D1:
All (6) channels are independently configured and scaled with
DPMSTalk software as KYZ contacts for energy measurements or as
high/low threshold alarms.
Solid state rated 50 ma @135 VAC/VDC
with less than 5 volt drop
54,000 CPH maximum
Phone: 1-800-274-5368
Fax: 585-454-7805
Visit Us Online!
WWW.ROCHESTER.COM
AMETEK Power Instruments
8
SCI Transducer Cat. 1-51(MTD)
Environment
Operating Temperature range: -20 to +70C
Storage Temperature: -40 to +85C
Humidity: 20 to 90% RH non condensing
RFI: <1% when subjected to 10 V/M @ 1 meter
ESD: IEC 801-2 level 3 (8 kV) with no damage
Surge Withstand: ANSI/IEEE C37.90, IEC 801-4 Class 4
Isolation: 2500 VAC RMS from Input/Output/Power/Case
500 VAC RMS between digital outputs
Communication/Configuration ports share common
with the analog outputs
Measurement/Calculation Accuracy
Volts, Amps, Watts, Vars: 0.2%
Watthours, Varhours: 0.2%
Neutral current: 0.75%
Volt Amps: 0.5%
Power Factor: 0.008* (rated VA/input VA)
Analog output: 0.1%
DPMS
Order Configuration Sheet
A base DPMS is standard equipped with: a nominal potential
of 120V, nominal current of 5 Amps, no analog outputs,
no digital outputs, and communications kit for programming
the DPMS. The communications kit is standard and includes
DPMSTalk programming software and a RS-232/485 adapter
with cable.
DPMS
Specifications
Digital Display
Phone: 1-800-274-5368
Fax: 585-454-7805
9
8-9
1/9/02, 5:22 PM
Communicate with
15 DPMS Units!
Fully Programmable
Digital & Analog Transducer with
Built-in Communications
DPMS-D
Additional Options:
Nominal voltage input: P2 = 277V
P3 = 480V
P4 = 69V.
Analog output option: A1 = 0-1mA
A2 = 4-20mA.
Power Requirements
95 to 256 VAC @ 50/60 Hz or DC
Mechanical
Panel cutout 4.38 x 3.75 inches
Weight 1.4 lbs. (0.64 kg.)
Programming Kit:
Environmental
Operating Temperature range: -20 to +70C
Storage Temperature: -40 to +85C
Humidity: 20 to 90% RH non condensing
RFI: no effect when subjected to 10 V/M @ 1 meter
ESD: IEC 801-2 level 3 (8 kV) with no damage
Surge Withstand: ANSI/IEEE C37.90, IEC 801-4 Class 4
Isolation: 2500 VAC RMS from power to Case or
Communications port1
Programmable Configuration
2 element for 3 phase 3 wire delta
2 1/2 element for 3 phase 4 wire wye
3 element for 3 phase 4 wire wye
Inputs
Current
Nominal 5 amps
Operating Range 0 to 10 amps
Burden per Element = 0.25 VA
Voltage Nominal 120 volts
Operating Range 85 to 150 volts
Optional: 69 VAC Nominal, Range
50-85 277 VAC Nominal, Range 180320 VAC 480 VAC Nominal, Range
310-550 VAC
Burden per Element: 0.05 VA
Frequency 45 to 65 Hertz
Sample Rate
128 Samples/Cycle
Power Supply
95 to 265 VAC @ 50/60 Hz or DC
6 VA Maximum @ 120 V
Outputs
3 Channel Analog:
All (3) channels are independently configured and scaled
with DPMSTalk software
Option A1: 0 to 1 ma, maximum 10 volt compliance
Option A2: 4 to 20 ma, maximum 12 volt compliance
Response Time </= 200 mS
6 Channel Digital Option D1:
All (6) channels are independently configured and scaled with
DPMSTalk software as KYZ contacts for energy measurements or as
high/low threshold alarms.
Solid state rated 50 ma @135 VAC/VDC
with less than 5 volt drop
54,000 CPH maximum
Phone: 1-800-274-5368
Fax: 585-454-7805
Visit Us Online!
WWW.ROCHESTER.COM
AMETEK Power Instruments
8
SCI Transducer Cat. 1-51(MTD)
Environment
Operating Temperature range: -20 to +70C
Storage Temperature: -40 to +85C
Humidity: 20 to 90% RH non condensing
RFI: <1% when subjected to 10 V/M @ 1 meter
ESD: IEC 801-2 level 3 (8 kV) with no damage
Surge Withstand: ANSI/IEEE C37.90, IEC 801-4 Class 4
Isolation: 2500 VAC RMS from Input/Output/Power/Case
500 VAC RMS between digital outputs
Communication/Configuration ports share common
with the analog outputs
Measurement/Calculation Accuracy
Volts, Amps, Watts, Vars: 0.2%
Watthours, Varhours: 0.2%
Neutral current: 0.75%
Volt Amps: 0.5%
Power Factor: 0.008* (rated VA/input VA)
Analog output: 0.1%
DPMS
Order Configuration Sheet
A base DPMS is standard equipped with: a nominal potential
of 120V, nominal current of 5 Amps, no analog outputs,
no digital outputs, and communications kit for programming
the DPMS. The communications kit is standard and includes
DPMSTalk programming software and a RS-232/485 adapter
with cable.
DPMS
Specifications
Digital Display
Phone: 1-800-274-5368
Fax: 585-454-7805
9
8-9
1/9/02, 5:22 PM
SCIENTIFIC
Digilogic AC Watt or Var Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
DIGILOGIC AC WATT OR VAR TRANSDUCERS
Specifications
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Applications
u Utility billing
Outputs
u 0 to 1 mAdc
u Test laboratories
u 15 or 135 mAdc
u State estimation
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
0.005% / C
0.0065% / C
0.009% / C
0.01% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
010,000
< 0.5% RO
< 0.25% RO
Response Time
Power Factor
Standard Calibration
Adjustments
The Digilogic Transducers measurement accuracy allows precise measurement of the difference between terminal power and GSU high-side power. This
difference, characterized as a station loss, is measurable because the random
errors associated with this type of measurement are negligible when using
high-accuracy Digilogic Transducers.
< 0.5% RO
< 0.25% RO
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
Frequency Range
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
0.05% RO,
Noncumulative
Operating Humidity
60 Hz
0.1% of Span,
Noncumulative
0.1% RO,
Noncumulative
Complete (Input/Output/Power/Case)
Dielectric Withstand
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
0.2% of Span,
Noncumulative
095% Noncondensing
Isolation
010,000
Any
The exceptional accuracy of the Digilogic Transducer line allows for uncommon measurements that have real payback.
10 Vdc
Load
PF Effect on Accuracy
P-Option* Vars
(Var Transducer)
u Exceptional reliability
0 to 1 mAdc Vars
(Var Transducer)
P-Option* Watts
(Watt Transducer)
(0.09% Reading + 0.005% RO) (0.1% Reading + 0.05% RO) (0.15% Reading + 0.01% RO) (0.15% Reading + 0.05% RO)
at 0200% RO
at 0120% RO
at 0200% RO
at 0120% RO
Accuracy
Features
0 to 1 mAdc Watts
(Watt Transducer)
Digilogic
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
10
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
11
10-11
1/9/02, 5:22 PM
SCIENTIFIC
Digilogic AC Watt or Var Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
DIGILOGIC AC WATT OR VAR TRANSDUCERS
Specifications
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Applications
u Utility billing
Outputs
u 0 to 1 mAdc
u Test laboratories
u 15 or 135 mAdc
u State estimation
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
0.005% / C
0.0065% / C
0.009% / C
0.01% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
010,000
< 0.5% RO
< 0.25% RO
Response Time
Power Factor
Standard Calibration
Adjustments
The Digilogic Transducers measurement accuracy allows precise measurement of the difference between terminal power and GSU high-side power. This
difference, characterized as a station loss, is measurable because the random
errors associated with this type of measurement are negligible when using
high-accuracy Digilogic Transducers.
< 0.5% RO
< 0.25% RO
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
Frequency Range
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
0.05% RO,
Noncumulative
Operating Humidity
60 Hz
0.1% of Span,
Noncumulative
0.1% RO,
Noncumulative
Complete (Input/Output/Power/Case)
Dielectric Withstand
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
0.2% of Span,
Noncumulative
095% Noncondensing
Isolation
010,000
Any
The exceptional accuracy of the Digilogic Transducer line allows for uncommon measurements that have real payback.
10 Vdc
Load
PF Effect on Accuracy
P-Option* Vars
(Var Transducer)
u Exceptional reliability
0 to 1 mAdc Vars
(Var Transducer)
P-Option* Watts
(Watt Transducer)
(0.09% Reading + 0.005% RO) (0.1% Reading + 0.05% RO) (0.15% Reading + 0.01% RO) (0.15% Reading + 0.05% RO)
at 0200% RO
at 0120% RO
at 0200% RO
at 0120% RO
Accuracy
Features
0 to 1 mAdc Watts
(Watt Transducer)
Digilogic
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
10
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
11
10-11
1/9/02, 5:22 PM
Ordering Procedure
Digilogic AC Watt or Var Transducers
Ordering Procedure
Digilogic AC Watt or Var Transducers
ORDERING PROCEDURE
Option
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
Auxiliary
Power
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
External
Aux. Power
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 6
Table 6
Table 3
A2
-5
PAN7
-1
-RS
Specify
output
voltage
A4
-SM
(P-Option Units)
A2** (leave blank)
Specify
input
value
DL342K5PAN7A4-5-1-RS-SM-SC
3-element, 4-20 mAdc Watt Transducer; internal auxiliary power; 10 A input; 240 V input; resistor scaling (converts current
output to voltage output); seismic brace; special calibration (example: 7200 W).
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
100-130 Vac
84-108% of Nominal Aux. Power Voltage
50-500 Hz
Equals Input Frequency
6 VA
6 VA
Current
Option
-3
-4
Std.***
-11
-5
15 A
-8****
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
PAN6-B
PAN7-B
PAN8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
Phone: 1-800-274-5368
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
P-Option
PAN6
PAN7
PAN8
Option
-0
Std.***
-1
-9
-2
**** Option -8 requires a Style V case. (See page 123 for case dimensions.
Maximum height of terminal strip(s) is 1.07" for units with -8 option.)
Option
-SC
-SM
Voltage
Current Range
Calibration at Rated Output
Nominal
w/ Accuracy
(5 A Nominal Input)
1A
0-2 A
100 W or Vars/Element
2.5 A
0-5 A
250 W or Vars/Element
5A
0-10 A
500 W or Vars/Element
7.5 A
0-15 A
750 W or Vars/Element
10 A
0-20 A
1000 W or Vars/Element
0-20 A1500 W or Vars/Element
25 A
0-30 A
2500 W or Vars/Element
Fax: 585-454-7805
-Z
Description
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option unidirectional units)
If you require additional options not shown here, see Special Options on page 128. When ordering any special options,
or more than three options, you must first consult the factory for pricing and delivery estimates.
12
SCI Transducer Cat. 1-51(MTD)
3 VA
3 VA
50-500 Hz
Equals Input Frequency
Option
-RS
-6
-12
-6-RS
-12-RS
85-135 Vac
70-112% of Nominal Aux. Power Voltage
DL342K5A2-5-1-RS-SM-SC
3-element, 0 to 1 mAdc Watt Transducer; 120 Vac external auxiliary power; 10 A input; 240 V input; resistor scaling
(converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
Watt
Model No.
DL5C5
DL5C511/2
DL31K5
DL31K521/2
DL342K5
Burden
-SC
Element
1
11/2*
2
21/2*
3
Frequency Range
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
DL342K5
EXAMPLES:
A2**
A4
A4
0 to 1 mAdc
output
Input Range
Digilogic
P-Option
outputs
Description
(0 to 1 mAdc Units)
Phone: 1-800-274-5368
Fax: 585-454-7805
13
12-13
1/9/02, 5:22 PM
Ordering Procedure
Digilogic AC Watt or Var Transducers
Ordering Procedure
Digilogic AC Watt or Var Transducers
ORDERING PROCEDURE
Option
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
Auxiliary
Power
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
External
Aux. Power
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 6
Table 6
Table 3
A2
-5
PAN7
-1
-RS
Specify
output
voltage
A4
-SM
(P-Option Units)
A2** (leave blank)
Specify
input
value
DL342K5PAN7A4-5-1-RS-SM-SC
3-element, 4-20 mAdc Watt Transducer; internal auxiliary power; 10 A input; 240 V input; resistor scaling (converts current
output to voltage output); seismic brace; special calibration (example: 7200 W).
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
100-130 Vac
84-108% of Nominal Aux. Power Voltage
50-500 Hz
Equals Input Frequency
6 VA
6 VA
Current
Option
-3
-4
Std.***
-11
-5
15 A
-8****
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
PAN6-B
PAN7-B
PAN8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
Phone: 1-800-274-5368
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
P-Option
PAN6
PAN7
PAN8
Option
-0
Std.***
-1
-9
-2
**** Option -8 requires a Style V case. (See page 123 for case dimensions.
Maximum height of terminal strip(s) is 1.07" for units with -8 option.)
Option
-SC
-SM
Voltage
Current Range
Calibration at Rated Output
Nominal
w/ Accuracy
(5 A Nominal Input)
1A
0-2 A
100 W or Vars/Element
2.5 A
0-5 A
250 W or Vars/Element
5A
0-10 A
500 W or Vars/Element
7.5 A
0-15 A
750 W or Vars/Element
10 A
0-20 A
1000 W or Vars/Element
0-20 A1500 W or Vars/Element
25 A
0-30 A
2500 W or Vars/Element
Fax: 585-454-7805
-Z
Description
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option unidirectional units)
If you require additional options not shown here, see Special Options on page 128. When ordering any special options,
or more than three options, you must first consult the factory for pricing and delivery estimates.
12
SCI Transducer Cat. 1-51(MTD)
3 VA
3 VA
50-500 Hz
Equals Input Frequency
Option
-RS
-6
-12
-6-RS
-12-RS
85-135 Vac
70-112% of Nominal Aux. Power Voltage
DL342K5A2-5-1-RS-SM-SC
3-element, 0 to 1 mAdc Watt Transducer; 120 Vac external auxiliary power; 10 A input; 240 V input; resistor scaling
(converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
Watt
Model No.
DL5C5
DL5C511/2
DL31K5
DL31K521/2
DL342K5
Burden
-SC
Element
1
11/2*
2
21/2*
3
Frequency Range
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
DL342K5
EXAMPLES:
A2**
A4
A4
0 to 1 mAdc
output
Input Range
Digilogic
P-Option
outputs
Description
(0 to 1 mAdc Units)
Phone: 1-800-274-5368
Fax: 585-454-7805
13
12-13
1/9/02, 5:22 PM
Wiring Diagrams
Digilogic AC Watt or Var Transducers
Wiring Diagrams
Digilogic AC Watt or Var Transducers
L1
LINE
L1
DC
OUTPUT
L1
L2
10
11
12
DC
OUTPUT
6A
12A
LINE
N
LINE
L1
L2
LINE
N
Digilogic
L2
L2
DC
OUTPUT
DC
OUTPUT
10
11
12
6A
6A
10
11
12
12A
6A
10
11
12
12A
12A
LOAD
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
DC
OUTPUT
LINE
L2
L3
L1
10
11
12
6A
DC
OUTPUT
12A
LINE
L2
L1
10
11
12
DC
OUTPUT
DC
OUTPUT
6A
6A
10
11
12
12A
10
11
12
12A
L2
L3
EXTERNAL
AUX. POWER
LOAD
LINE
L1
L2
LOAD
LINE
L1
DC
OUTPUT
6A
DC
OUTPUT
L3
LINE
10
11
12
6A
EXTERNAL
AUX. POWER
12A
DC
OUTPUT
10
11
12
6A
EXTERNAL
AUX. POWER
12A
LOAD
10
11
12
12A
10
11
12
12A
LOAD
LOAD
LOAD
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
14
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
J 1001-9111 (10K)
14-15
EXTERNAL
AUX. POWER
Adjust
L3
6A
EXTERNAL
AUX. POWER
L2
+
1
L3
L1
DC
OUTPUT
LINE
L2
LOAD
L1
L3
12A
LINE
L2
LINE
L2
EXTERNAL
AUX. POWER
L1
LOAD
6A
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L3
LOAD
EXTERNAL
AUX. POWER
LOAD
EXTERNAL
AUX. POWER
1/9/02, 5:23 PM
Fax: 585-454-7805
15
Wiring Diagrams
Digilogic AC Watt or Var Transducers
Wiring Diagrams
Digilogic AC Watt or Var Transducers
L1
LINE
L1
DC
OUTPUT
L1
L2
10
11
12
DC
OUTPUT
6A
12A
LINE
N
LINE
L1
L2
LINE
N
Digilogic
L2
L2
DC
OUTPUT
DC
OUTPUT
10
11
12
6A
6A
10
11
12
12A
6A
10
11
12
12A
12A
LOAD
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
DC
OUTPUT
LINE
L2
L3
L1
10
11
12
6A
DC
OUTPUT
12A
LINE
L2
L1
10
11
12
DC
OUTPUT
DC
OUTPUT
6A
6A
10
11
12
12A
10
11
12
12A
L2
L3
EXTERNAL
AUX. POWER
LOAD
LINE
L1
L2
LOAD
LINE
L1
DC
OUTPUT
6A
DC
OUTPUT
L3
LINE
10
11
12
6A
EXTERNAL
AUX. POWER
12A
DC
OUTPUT
10
11
12
6A
EXTERNAL
AUX. POWER
12A
LOAD
10
11
12
12A
10
11
12
12A
LOAD
LOAD
LOAD
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
14
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
J 1001-9111 (10K)
14-15
EXTERNAL
AUX. POWER
Adjust
L3
6A
EXTERNAL
AUX. POWER
L2
+
1
L3
L1
DC
OUTPUT
LINE
L2
LOAD
L1
L3
12A
LINE
L2
LINE
L2
EXTERNAL
AUX. POWER
L1
LOAD
6A
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L3
LOAD
EXTERNAL
AUX. POWER
LOAD
EXTERNAL
AUX. POWER
1/9/02, 5:23 PM
Fax: 585-454-7805
15
SCIENTIFIC
Specifications
COLUMBUS
SCIENTIFIC
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
COLUMBUS
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Features
Applications
Utility billing
Outputs
0 to 1 mAdc
Test laboratories
15 or 135 mAdc
Exceptional reliability
Process control
0 to 1 mAdc Watts
(Watt/Watthour
Transducer)
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
0.005% / C
0.0065% / C
0.009% / C
0.01% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
Load
010,000
< 0.5% RO
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
Approximate Dimensions
(excluding mounting plate)
095% Noncondensing
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
4 lbs., 12 oz. (2.2 kg)
7.0" W x 3.7" D x 5.6" H
(178 mm x 94 mm x 142 mm)
Style I Case, see page 122
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
16
SCI Transducer Cat. 1-51(MTD)
Fax: 585-454-7805
0.2% of Span,
Noncumulative
0.1% RO,
Noncumulative
Surge Withstand
60 Hz
0.1% of Span,
Noncumulative
Dielectric Withstand
Maximum Net Weight
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
0.05% RO,
Noncumulative
Operating Humidity
Isolation
Phone: 1-800-274-5368
Frequency Range
< 0.25% RO
< 0.5% RO
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
PF Effect on Accuracy
010,000
< 0.25% RO
Standard Calibration
Adjustments
10 Vdc
Power Factor
P-Option* Vars
(Var/Varhour
Transducer)
(0.09% Reading + 0.005% RO) (0.1% Reading + 0.05% RO) (0.15% Reading + 0.01% RO) (0.15% Reading + 0.05% RO)
at 0200% RO
at 0120% RO
at 0120% RO
at 0200% RO
Accuracy
Response Time
0 to 1 mAdc Vars
(Var/Varhour
Transducer)
P-Option* Watts
(Watt/Watthour
Transducer)
Digilogic
Phone: 1-800-274-5368
Fax: 585-454-7805
17
16-17
1/9/02, 5:23 PM
SCIENTIFIC
Specifications
COLUMBUS
SCIENTIFIC
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
COLUMBUS
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Features
Applications
Utility billing
Outputs
0 to 1 mAdc
Test laboratories
15 or 135 mAdc
Exceptional reliability
Process control
0 to 1 mAdc Watts
(Watt/Watthour
Transducer)
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
0.005% / C
0.0065% / C
0.009% / C
0.01% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
Load
010,000
< 0.5% RO
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
Approximate Dimensions
(excluding mounting plate)
095% Noncondensing
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
4 lbs., 12 oz. (2.2 kg)
7.0" W x 3.7" D x 5.6" H
(178 mm x 94 mm x 142 mm)
Style I Case, see page 122
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
16
SCI Transducer Cat. 1-51(MTD)
Fax: 585-454-7805
0.2% of Span,
Noncumulative
0.1% RO,
Noncumulative
Surge Withstand
60 Hz
0.1% of Span,
Noncumulative
Dielectric Withstand
Maximum Net Weight
1% of Reading (minimum)
10% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
0.05% RO,
Noncumulative
Operating Humidity
Isolation
Phone: 1-800-274-5368
Frequency Range
< 0.25% RO
< 0.5% RO
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
PF Effect on Accuracy
010,000
< 0.25% RO
Standard Calibration
Adjustments
10 Vdc
Power Factor
P-Option* Vars
(Var/Varhour
Transducer)
(0.09% Reading + 0.005% RO) (0.1% Reading + 0.05% RO) (0.15% Reading + 0.01% RO) (0.15% Reading + 0.05% RO)
at 0200% RO
at 0120% RO
at 0120% RO
at 0200% RO
Accuracy
Response Time
0 to 1 mAdc Vars
(Var/Varhour
Transducer)
P-Option* Watts
(Watt/Watthour
Transducer)
Digilogic
Phone: 1-800-274-5368
Fax: 585-454-7805
17
16-17
1/9/02, 5:23 PM
Ordering Procedure
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
Ordering Procedure
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Description
Output
Auxiliary
Power
Pulse
Output
Mounting
Orientation
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
Ext. Aux.
Power
A2***
A4
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 5
Table 6
Table 7
Table 7
Table 3
(P-Option Units)
A2*** (leave blank)
A4
A2
-6070
PAN7
A4
Burden
3 VA
3 VA
6 VA
6 VA
*** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
DLV31K521/2
P-Option
outputs
Frequency Range
Digilogic
0 to 1 mAdc
output
Input Range
(0 to 1 mAdc Units)
-V
-5
Specify
counts
per hour
-1
-RS
-SM
Specify
output
voltage
-SC
Specify
input
value
If other than 120 Vac (std.), specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux., 277 Vac Aux., or 480 Vac Aux.
Option
-6070
-6270
-6096
-6296
Description
Form-C Mercury-Wetted Relay, Unidirectional
Form-C Solid-State, Unidirectional
Form-C Mercury-Wetted Relay, Bidirectional
Form-C Solid-State, Bidirectional
CPH Range****
2-14,000
2-900,000
2-14,000
2-900,000
Mounting Orientation*****
-V (Vertical) or -H (Horizontal)
Not Applicable
-V (Vertical) or -H (Horizontal)
Not Applicable
DLV31K521/2A2-6070-V-5-1-RS-SM-SC
Current
21/2-element, 0 to 1 mAdc Var/Varhour Transducer; 120 Vac external auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output);
seismic brace; special calibration (example: 7200 W).
DLV31K521/2PAN7A4-6070-V-5-1-RS-SM-SC
21/2-element, 4-20 mAdc Var/Varhour Transducer; internal auxiliary power; mercury-wetted relay (unidirectional);
vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output); seismic brace;
special calibration (example: 7200 W).
Element
1
2
21/2*
3
Var
Model No.
DLV5C5
DLV31K5
DLV31K521/2
DLV342K5
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Option
-RS
-6
-12
-6-RS
-12-RS
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
P-Option**
PAN6
PAN7
PAN8
PAN6-B
PAN7-B
PAN8-B
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
Option
-SC
-SM
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
-Z
Description
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option unidirectional units)
If you require additional options not shown here, see Special Options on page 128. When ordering any special options,
or more than three options, you must first consult the factory for pricing and delivery estimates.
18
SCI Transducer Cat. 1-51(MTD)
Current Range
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
0-30 A
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
25 A
Option -8 requires a Style V case. (See page 123 for case dimensions.
Maximum height of terminal strip(s) is 1.07" for units with -8 option.)
Option
-3
-4
Std.
-11
-5
-7
-8
Voltage
Phone: 1-800-274-5368
Fax: 585-454-7805
19
18-19
1/9/02, 5:23 PM
Ordering Procedure
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
Ordering Procedure
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Description
Output
Auxiliary
Power
Pulse
Output
Mounting
Orientation
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
Ext. Aux.
Power
A2***
A4
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 5
Table 6
Table 7
Table 7
Table 3
(P-Option Units)
A2*** (leave blank)
A4
A2
-6070
PAN7
A4
Burden
3 VA
3 VA
6 VA
6 VA
*** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
DLV31K521/2
P-Option
outputs
Frequency Range
Digilogic
0 to 1 mAdc
output
Input Range
(0 to 1 mAdc Units)
-V
-5
Specify
counts
per hour
-1
-RS
-SM
Specify
output
voltage
-SC
Specify
input
value
If other than 120 Vac (std.), specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux., 277 Vac Aux., or 480 Vac Aux.
Option
-6070
-6270
-6096
-6296
Description
Form-C Mercury-Wetted Relay, Unidirectional
Form-C Solid-State, Unidirectional
Form-C Mercury-Wetted Relay, Bidirectional
Form-C Solid-State, Bidirectional
CPH Range****
2-14,000
2-900,000
2-14,000
2-900,000
Mounting Orientation*****
-V (Vertical) or -H (Horizontal)
Not Applicable
-V (Vertical) or -H (Horizontal)
Not Applicable
DLV31K521/2A2-6070-V-5-1-RS-SM-SC
Current
21/2-element, 0 to 1 mAdc Var/Varhour Transducer; 120 Vac external auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output);
seismic brace; special calibration (example: 7200 W).
DLV31K521/2PAN7A4-6070-V-5-1-RS-SM-SC
21/2-element, 4-20 mAdc Var/Varhour Transducer; internal auxiliary power; mercury-wetted relay (unidirectional);
vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output); seismic brace;
special calibration (example: 7200 W).
Element
1
2
21/2*
3
Var
Model No.
DLV5C5
DLV31K5
DLV31K521/2
DLV342K5
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Option
-RS
-6
-12
-6-RS
-12-RS
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
P-Option**
PAN6
PAN7
PAN8
PAN6-B
PAN7-B
PAN8-B
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
Option
-SC
-SM
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
-Z
Description
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option unidirectional units)
If you require additional options not shown here, see Special Options on page 128. When ordering any special options,
or more than three options, you must first consult the factory for pricing and delivery estimates.
18
SCI Transducer Cat. 1-51(MTD)
Current Range
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
0-30 A
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
25 A
Option -8 requires a Style V case. (See page 123 for case dimensions.
Maximum height of terminal strip(s) is 1.07" for units with -8 option.)
Option
-3
-4
Std.
-11
-5
-7
-8
Voltage
Phone: 1-800-274-5368
Fax: 585-454-7805
19
18-19
1/9/02, 5:23 PM
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
-6070/-6096 Models
DC
OUTPUT
L1
DC
OUTPUT
L1
L2
LINE
LINE
LINE
L2
-6270/-6296 Models
-6070/-6096 Models
LINE
L1
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
10
11
12
LOAD
10
11
12
L2
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
Digilogic
10
11
12
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
-6070/-6096 Models
-6270/-6296 Models
L1
DC
OUTPUT
LINE
L2
L1
L3
+
3
-6070/-6096 Models
DC
OUTPUT
LINE
L2
LINE
L3
L1
10
11
12
LOAD
LINE
L3
DC
OUTPUT
L1
10
11
12
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
Adjust
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
20
SCI Transducer Cat. 1-51(MTD)
L2
DC
OUTPUT
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
-6270/-6296 Models
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
21
20-21
1/9/02, 5:23 PM
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
-6070/-6096 Models
DC
OUTPUT
L1
DC
OUTPUT
L1
L2
LINE
LINE
LINE
L2
-6270/-6296 Models
-6070/-6096 Models
LINE
L1
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
10
11
12
LOAD
10
11
12
L2
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
Digilogic
10
11
12
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
-6070/-6096 Models
-6270/-6296 Models
L1
DC
OUTPUT
LINE
L2
L1
L3
+
3
-6070/-6096 Models
DC
OUTPUT
LINE
L2
LINE
L3
L1
10
11
12
LOAD
LINE
L3
DC
OUTPUT
L1
10
11
12
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
Adjust
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
20
SCI Transducer Cat. 1-51(MTD)
L2
DC
OUTPUT
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
-6270/-6296 Models
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
21
20-21
1/9/02, 5:23 PM
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
-6070/-6096 Models
LINE
DC
OUTPUT
L2
L1
DC
OUTPUT
L1
LINE
LINE
L2
-6270/-6296 Models
-6070/-6096 Models
LINE
L1
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
LOAD
EXTERNAL
AUX. POWER
10
11
12
LOAD
10
11
12
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
Digilogic
10
11
12
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
-6070/-6096 Models
-6270/-6296 Models
L1
LINE
L2
L1
L3
LINE
L2
-6070/-6096 Models
-6270/-6296 Models
L3
LINE
L1
DC
OUTPUT
DC
OUTPUT
DC
OUTPUT
10
11
12
10
11
12
LOAD
L1
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Adjust
Fax: 585-454-7805
22
SCI Transducer Cat. 1-51(MTD)
L2
DC
OUTPUT
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LINE
L3
L2
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
23
22-23
1/9/02, 5:23 PM
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Digilogic AC Watt/Watthour
or Var/Varhour Transducers
-6070/-6096 Models
LINE
DC
OUTPUT
L2
L1
DC
OUTPUT
L1
LINE
LINE
L2
-6270/-6296 Models
-6070/-6096 Models
LINE
L1
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
LOAD
EXTERNAL
AUX. POWER
10
11
12
LOAD
10
11
12
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
Digilogic
10
11
12
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
-6070/-6096 Models
-6270/-6296 Models
L1
LINE
L2
L1
L3
LINE
L2
-6070/-6096 Models
-6270/-6296 Models
L3
LINE
L1
DC
OUTPUT
DC
OUTPUT
DC
OUTPUT
10
11
12
10
11
12
LOAD
L1
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Adjust
Fax: 585-454-7805
22
SCI Transducer Cat. 1-51(MTD)
L2
DC
OUTPUT
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LINE
L3
L2
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
23
22-23
1/9/02, 5:23 PM
SCIENTIFIC
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
DIGILOGIC AC VOLT-AMP OR COMBINED VOLT-AMP/VOLT-AMPHOUR TRANSDUCERS
Specifications
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
Features
Applications
Utility billing
Outputs
Test laboratories
15 mAdc
Exceptional reliability
Process control
420 mAdc
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
0.01% / C
0.015% / C
-20 C to +70 C
-20 C to +50 C
Compliance Voltage
01 mAdc
10 Vdc
010,000
Load
< 2% RO
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
1050 mAdc
P-Option* Volt-Amps
(Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducer)
01 mAdc Volt-Amps
(Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducer)
Power Factor
Any
(Included in Accuracy specification above.)
PF Effect on Accuracy
Standard Calibration
Adjustments
Gain
Zero
5% of Reading (minimum)
None Required
Frequency Range
5862 Hz
Operating Humidity
Isolation
095% Noncondensing
Complete (Input/Output/Power/Case) All KYZ outputs are isolated.
1500 VRMS at 60 Hz
Dielectric Withstand
ANSI/IEEE C37.90.1
Surge Withstand
Maximum Volt-Amp
Net Weight Volt-Amp/Volt-Amphour
Approximate Dimensions
(excluding mounting plate)
5001000 Volt-Amps/Element
500600 Volt-Amps/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
24
SCI Transducer Cat. 1-51(MTD)
Digilogic
Phone: 1-800-274-5368
Fax: 585-454-7805
25
24-25
1/9/02, 5:23 PM
SCIENTIFIC
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
DIGILOGIC AC VOLT-AMP OR COMBINED VOLT-AMP/VOLT-AMPHOUR TRANSDUCERS
Specifications
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
Features
Applications
Utility billing
Outputs
Test laboratories
15 mAdc
Exceptional reliability
Process control
420 mAdc
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
0.01% / C
0.015% / C
-20 C to +70 C
-20 C to +50 C
Compliance Voltage
01 mAdc
10 Vdc
010,000
Load
< 2% RO
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
1050 mAdc
P-Option* Volt-Amps
(Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducer)
01 mAdc Volt-Amps
(Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducer)
Power Factor
Any
(Included in Accuracy specification above.)
PF Effect on Accuracy
Standard Calibration
Adjustments
Gain
Zero
5% of Reading (minimum)
None Required
Frequency Range
5862 Hz
Operating Humidity
Isolation
095% Noncondensing
Complete (Input/Output/Power/Case) All KYZ outputs are isolated.
1500 VRMS at 60 Hz
Dielectric Withstand
ANSI/IEEE C37.90.1
Surge Withstand
Maximum Volt-Amp
Net Weight Volt-Amp/Volt-Amphour
Approximate Dimensions
(excluding mounting plate)
5001000 Volt-Amps/Element
500600 Volt-Amps/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
24
SCI Transducer Cat. 1-51(MTD)
Digilogic
Phone: 1-800-274-5368
Fax: 585-454-7805
25
24-25
1/9/02, 5:23 PM
Ordering Procedure
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
ORDERING PROCEDURE
Ordering Procedure
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
Auxiliary
Power
Pulse
Output
Mounting
Orientation
Current
Input
Voltage
Input
-RS/Freq.
Option
Option
#2
Option
#3
Ext. Aux.
Power
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 5
Table 6
Table 7
Table 7
Table 3
A2**
A4
(P-Option Units)
A2** (leave blank)
A4
0-1 mAdc
output
DLVA31K521/2
-6070
PAN7
Frequency Range
Burden
85-135 Vac
70-112% of Nominal Aux. Power Voltage
50-500 Hz
Equals Input Frequency
3 VA
3 VA
100-130 Vac
84-108% of Nominal Aux. Power Voltage
50-500 Hz
Equals Input Frequency
6 VA
6 VA
** For external auxiliary power voltages other than 120 Vac, you must specify the voltage in the last position of the complete model number. (Example: 240 Vac)
A2
P-Option
outputs
Input Range
Digilogic
Description
-V
-5
-1
Specify
counts
per hour
A4
-RS
-SM
Specify
output
voltage
-SC
Specify
input
value
Description
Form-C Mercury-Wetted Relay, Unidirectional
Form-C Solid-State, Unidirectional
CPH Range***
2-14,000
Standard cph is one
2-900,000
count/volt-amphour.
Mounting Orientation****
-V (Vertical) or -H (Horizontal)
Not Applicable
*** You must specify the desired counts per hour. This information is not part of the model number, but must be provided to the factory when you place your order.
**** You must specify the desired mounting orientation for units with mercury-wetted relays.
Current
DLVA31K521/2A2-6070-V-5-1-RS-SM-SC
21/2-element, 0-1 mAdc Volt-Amp/Volt-Amphour Transducer; 120 Vac external auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting;10 A input; 240 V input; resistor scaling (example: 0-5 Vdc); seismic brace;
special calibration (example: 7200 VA).
DLVA31K521/2PAN7A4-6070-V-5-1-RS-SM-SC
21/2-element, 4-20 mAdc Volt-Amp/Volt-Amphour Transducer; internal auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting;10 A input; 240 V input; resistor scaling (example: 1-5 Vdc); seismic brace;
special calibration (example: 7200 VA).
Option
-3
-4
Std.
-11
-5
-7
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
Current Range
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
Voltage
Calibration at Rated Output
(5 A Nominal Input)
100 VA/Element
250 VA/Element
500 VA/Element
750 VA/Element
1000 VA/Element
1500 VA/Element
Option
-0
Std.
-1
-9
-2
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Option
-SC
-SM
P-Option
PAN6
PAN7
PAN8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
This information is not part of the model number, but must be provided to the factory when
you place your order.
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
-Z
Description
Special Calibration
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option units)
If you require additional options not shown here, see Special Options on page 128. When ordering any Special Options,
or more than three options, you must first consult the factory for pricing and delivery estimates.
Phone: 1-800-274-5368
Fax: 585-454-7805
26
SCI Transducer Cat. 1-51(MTD)
Option
-RS
-6
-12
-6-RS
-12-RS
Phone: 1-800-274-5368
Fax: 585-454-7805
27
26-27
1/9/02, 5:24 PM
Ordering Procedure
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
ORDERING PROCEDURE
Ordering Procedure
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
Auxiliary
Power
Pulse
Output
Mounting
Orientation
Current
Input
Voltage
Input
-RS/Freq.
Option
Option
#2
Option
#3
Ext. Aux.
Power
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 5
Table 6
Table 7
Table 7
Table 3
A2**
A4
(P-Option Units)
A2** (leave blank)
A4
0-1 mAdc
output
DLVA31K521/2
-6070
PAN7
Frequency Range
Burden
85-135 Vac
70-112% of Nominal Aux. Power Voltage
50-500 Hz
Equals Input Frequency
3 VA
3 VA
100-130 Vac
84-108% of Nominal Aux. Power Voltage
50-500 Hz
Equals Input Frequency
6 VA
6 VA
** For external auxiliary power voltages other than 120 Vac, you must specify the voltage in the last position of the complete model number. (Example: 240 Vac)
A2
P-Option
outputs
Input Range
Digilogic
Description
-V
-5
-1
Specify
counts
per hour
A4
-RS
-SM
Specify
output
voltage
-SC
Specify
input
value
Description
Form-C Mercury-Wetted Relay, Unidirectional
Form-C Solid-State, Unidirectional
CPH Range***
2-14,000
Standard cph is one
2-900,000
count/volt-amphour.
Mounting Orientation****
-V (Vertical) or -H (Horizontal)
Not Applicable
*** You must specify the desired counts per hour. This information is not part of the model number, but must be provided to the factory when you place your order.
**** You must specify the desired mounting orientation for units with mercury-wetted relays.
Current
DLVA31K521/2A2-6070-V-5-1-RS-SM-SC
21/2-element, 0-1 mAdc Volt-Amp/Volt-Amphour Transducer; 120 Vac external auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting;10 A input; 240 V input; resistor scaling (example: 0-5 Vdc); seismic brace;
special calibration (example: 7200 VA).
DLVA31K521/2PAN7A4-6070-V-5-1-RS-SM-SC
21/2-element, 4-20 mAdc Volt-Amp/Volt-Amphour Transducer; internal auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting;10 A input; 240 V input; resistor scaling (example: 1-5 Vdc); seismic brace;
special calibration (example: 7200 VA).
Option
-3
-4
Std.
-11
-5
-7
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
Current Range
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
Voltage
Calibration at Rated Output
(5 A Nominal Input)
100 VA/Element
250 VA/Element
500 VA/Element
750 VA/Element
1000 VA/Element
1500 VA/Element
Option
-0
Std.
-1
-9
-2
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Option
-SC
-SM
P-Option
PAN6
PAN7
PAN8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
This information is not part of the model number, but must be provided to the factory when
you place your order.
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
-Z
Description
Special Calibration
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option units)
If you require additional options not shown here, see Special Options on page 128. When ordering any Special Options,
or more than three options, you must first consult the factory for pricing and delivery estimates.
Phone: 1-800-274-5368
Fax: 585-454-7805
26
SCI Transducer Cat. 1-51(MTD)
Option
-RS
-6
-12
-6-RS
-12-RS
Phone: 1-800-274-5368
Fax: 585-454-7805
27
26-27
1/9/02, 5:24 PM
Wiring Diagrams
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
Wiring Diagrams
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Style V Case) AND P-OPTION UNITS (Special Case)
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Style V Case) AND P-OPTION UNITS (Special Case)
-6070 Models
LINE
L2
L1
-6270 Models
-6070 Models
LINE
L1
L2
L1
DC
OUTPUT
DC
OUTPUT
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
LOAD
Omitted on VA Models
EXTERNAL
AUX. POWER
10
11
12
LOAD
10
11
12
10
11
12
Omitted on VA Models
LOAD
LOAD
Omitted on VA Models
Omitted on VA Models
-6070 Models
-6270 Models
L1
LINE
L2
L1
L3
LINE
L2
-6070 Models
L3
-6270 Models
LINE
LINE
L1
DC
OUTPUT
DC
OUTPUT
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
EXTERNAL
AUX. POWER
10
11
12
10
11
12
Omitted on VA Models
Phone: 1-800-274-5368
Adjust
Fax: 585-454-7805
28
SCI Transducer Cat. 1-51(MTD)
LOAD
LOAD
L3
EXTERNAL
AUX. POWER
Omitted on VA Models
Adjust
L2
DC
OUTPUT
LOAD
Omitted on VA Models
L1
L3
EXTERNAL
AUX. POWER
L2
EXTERNAL
AUX. POWER
DC
OUTPUT
L3
EXTERNAL
AUX. POWER
8
L2
EXTERNAL
AUX. POWER
LINE
LINE
Digilogic
Omitted on VA Models
Phone: 1-800-274-5368
Fax: 585-454-7805
29
28-29
1/9/02, 5:24 PM
Wiring Diagrams
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
Wiring Diagrams
Digilogic AC Volt-Amp or Combined
Volt-Amp/Volt-Amphour Transducers
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Style V Case) AND P-OPTION UNITS (Special Case)
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Style V Case) AND P-OPTION UNITS (Special Case)
-6070 Models
LINE
L2
L1
-6270 Models
-6070 Models
LINE
L1
L2
L1
DC
OUTPUT
DC
OUTPUT
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
LOAD
Omitted on VA Models
EXTERNAL
AUX. POWER
10
11
12
LOAD
10
11
12
10
11
12
Omitted on VA Models
LOAD
LOAD
Omitted on VA Models
Omitted on VA Models
-6070 Models
-6270 Models
L1
LINE
L2
L1
L3
LINE
L2
-6070 Models
L3
-6270 Models
LINE
LINE
L1
DC
OUTPUT
DC
OUTPUT
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
EXTERNAL
AUX. POWER
10
11
12
10
11
12
Omitted on VA Models
Phone: 1-800-274-5368
Adjust
Fax: 585-454-7805
28
SCI Transducer Cat. 1-51(MTD)
LOAD
LOAD
L3
EXTERNAL
AUX. POWER
Omitted on VA Models
Adjust
L2
DC
OUTPUT
LOAD
Omitted on VA Models
L1
L3
EXTERNAL
AUX. POWER
L2
EXTERNAL
AUX. POWER
DC
OUTPUT
L3
EXTERNAL
AUX. POWER
8
L2
EXTERNAL
AUX. POWER
LINE
LINE
Digilogic
Omitted on VA Models
Phone: 1-800-274-5368
Fax: 585-454-7805
29
28-29
1/9/02, 5:24 PM
Output Signal
All pulse outputs are by (Form-A) relay contacts rated at
2A ac or dc, 200W. Relay operation is synchronized to the
ac line zero crossing to maximize contact life.
Cumulative Consuption
Applications
Features
Accuracy to 0.15% of reading
Substation monitoring
01 mAdc
Exceptional reliability
SCADA
15 mAdc
420 mAdc
The display and keypad are used to view all stored and
operational values, set all controllable parameters, and
indicate any detected error conditions.
Average-sensing or true-RMS
measurement available
Process control
1050 mAdc
Keypad
Expanded-scale voltage
models available
Serial Output
Provides comma-delimited CSV data for downloading to
a spreadsheet. The serial port is the master and utilizes
X-on/X-off data-stream control. Baud rate is selectable
from 300-4800 bps. Normal operation provides all current
parameters and all demand intervals since the last download.
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
Up to six transducers in one module
Two, four, or eight modules in one enclosure
Internal Battery
TIFIE
Time-of-Use
The DM-10 features one time-of-use setting for operation
during peak hours.
30
SCI Transducer Cat. 1-51(MTD)
Outputs
Auxiliary Power
Headquarters
50 Fordham Road
CER
Wilmington, MA 01887
Tel: 978-988-4101
Fax: 978-988-4179
E-Mail: power.industrial@ametek.com
Exceltronic
Demand
SCIENTIFIC
SCIENTIFIC
Exceltronic AC Current
or Voltage Transducers
COLUMBUS
COLUMBUS
Phone: 1-800-274-5368
Fax: 585-454-7805
31
30-31
1/9/02, 5:24 PM
Output Signal
All pulse outputs are by (Form-A) relay contacts rated at
2A ac or dc, 200W. Relay operation is synchronized to the
ac line zero crossing to maximize contact life.
Cumulative Consuption
Applications
Features
Accuracy to 0.15% of reading
Substation monitoring
01 mAdc
Exceptional reliability
SCADA
15 mAdc
420 mAdc
The display and keypad are used to view all stored and
operational values, set all controllable parameters, and
indicate any detected error conditions.
Average-sensing or true-RMS
measurement available
Process control
1050 mAdc
Keypad
Expanded-scale voltage
models available
Serial Output
Provides comma-delimited CSV data for downloading to
a spreadsheet. The serial port is the master and utilizes
X-on/X-off data-stream control. Baud rate is selectable
from 300-4800 bps. Normal operation provides all current
parameters and all demand intervals since the last download.
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
Up to six transducers in one module
Two, four, or eight modules in one enclosure
Internal Battery
TIFIE
Time-of-Use
The DM-10 features one time-of-use setting for operation
during peak hours.
30
SCI Transducer Cat. 1-51(MTD)
Outputs
Auxiliary Power
Headquarters
50 Fordham Road
CER
Wilmington, MA 01887
Tel: 978-988-4101
Fax: 978-988-4179
E-Mail: power.industrial@ametek.com
Exceltronic
Demand
SCIENTIFIC
SCIENTIFIC
Exceltronic AC Current
or Voltage Transducers
COLUMBUS
COLUMBUS
Phone: 1-800-274-5368
Fax: 585-454-7805
31
30-31
1/9/02, 5:24 PM
Specifications
Exceltronic AC Average-Sensing
Current or Voltage Transducers
Specifications
Current
Input
Voltage
Input
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
01 mAdc Amps
(Current Transducer)
P-Option* Amps
(Current Transducer)
5A
05 A
010 A
20 A
250 A
0.25 VA (maximum) at 5 A
5A
05 A
06 A
20 A
250 A
0.25 VA (maximum) at 5 A
N/A
N/A
N/A
N/A
120 V
0150 V
0150 V
180 V
2.2 VA (maximum) at 120 V
120 V
0150 V
0165 V
180 V
2.2 VA (maximum) at 120 V
None Required
100130 Vac
50500 Hz
3 VA Nominal
None Required
100130 Vac
50500 Hz
3 VA Nominal
1 mAdc for
Standard Calibration
Accuracy Standard
A4 Models
0.5% of Span
0.01% / C
-20 C to +60 C
Compliance Voltage
10 Vdc
010,000
Load
Output Ripple Peak
Response Time
Standard Calibration
Adjustments
Gain
Zero
01 mAdc Volts
(Voltage Transducer)
Current
Input
1 mAdc for
Standard Calibration
0.5% of Span
0.025% / C
0.01% / C
0.025% / C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
010,000
< 0.25% RO
0.25% RO,
Noncumulative
0.15% of Span,
Noncumulative
0.3% of Span,
Noncumulative
095% Noncondensing
Operating Humidity
Isolation
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Surge Withstand
Complete
(Input/Output/Power/Case)
Single
Triple
Approximate
Dimensions
(excluding
mounting plate)
Single
N/A
120 V
0150 V
7.5150 V***
180 V
0.035 VA (maximum) at 120 V
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
85135 Vac
50500 Hz
2 VA Nominal
100135 Vac
50500 Hz
5 VA Nominal
85135 Vac
50500 Hz
2 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
0.5% of Span
0.5% of Span
0.01% / C
0.025% / C
0.01% / C
0.025% / C
-20 C to +60 C
0 C to +50 C
-20 C to +60 C
0 C to +50 C
Compliance Voltage
10 Vdc
Response Time
Standard Calibration
Adjustments
Gain
Zero
< 1% RO
1% of Span
< 1% RO
1% of Span
5% of Reading (minimum)
20% of Span (minimum)
0.1% of RO
5% of Zero Point (minimum)
2 :1 (maximum)
0.1% RO,
Noncumulative
0.1% RO,
Noncumulative
0.15% of Span,
Noncumulative
0.15% of Span,
Noncumulative
095% Noncondensing
Isolation
Approximate Dimensions
(excluding mounting plate)
Crest Factor
010,000
5% of Reading (minimum)
20% of Span (minimum)
0.1% of RO
5% of Zero Point (minimum)
Frequency Range
Stability (per year)
10 Vdc
010,000
Load
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
2 lbs., 1 oz. (0.9 kg)
Phone: 1-800-274-5368
Fax: 585-454-7805
32
SCI Transducer Cat. 1-51(MTD)
N/A
Surge Withstand
Maximum
Net Weight
P-Option* Volts
(Voltage Transducer)
01 mAdc Volts
(Voltage Transducer)
5A
05 A
0.256 A**
15 A
250 A
0.2 VA (maximum) at 5 A
Dielectric Withstand
ANSI/IEEE C37.90.1
Triple
P-Option* Amps
(Current Transducer)
Operating Humidity
Complete
(Input/Output/Case)
2500 VRMS** at 60 Hz
Dielectric Withstand
Voltage
Input
01 mAdc Amps
(Current Transducer)
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
< 0.25% RO
Frequency Range
Specifications
P-Option* Volts
(Voltage Transducer)
Exceltronic
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
Specifications
Exceltronic AC True-RMS
Current or Voltage Transducers
Phone: 1-800-274-5368
Fax: 585-454-7805
33
32-33
1/9/02, 5:24 PM
Specifications
Exceltronic AC Average-Sensing
Current or Voltage Transducers
Specifications
Current
Input
Voltage
Input
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
01 mAdc Amps
(Current Transducer)
P-Option* Amps
(Current Transducer)
5A
05 A
010 A
20 A
250 A
0.25 VA (maximum) at 5 A
5A
05 A
06 A
20 A
250 A
0.25 VA (maximum) at 5 A
N/A
N/A
N/A
N/A
120 V
0150 V
0150 V
180 V
2.2 VA (maximum) at 120 V
120 V
0150 V
0165 V
180 V
2.2 VA (maximum) at 120 V
None Required
100130 Vac
50500 Hz
3 VA Nominal
None Required
100130 Vac
50500 Hz
3 VA Nominal
1 mAdc for
Standard Calibration
Accuracy Standard
A4 Models
0.5% of Span
0.01% / C
-20 C to +60 C
Compliance Voltage
10 Vdc
010,000
Load
Output Ripple Peak
Response Time
Standard Calibration
Adjustments
Gain
Zero
01 mAdc Volts
(Voltage Transducer)
Current
Input
1 mAdc for
Standard Calibration
0.5% of Span
0.025% / C
0.01% / C
0.025% / C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
010,000
< 0.25% RO
0.25% RO,
Noncumulative
0.15% of Span,
Noncumulative
0.3% of Span,
Noncumulative
095% Noncondensing
Operating Humidity
Isolation
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Surge Withstand
Complete
(Input/Output/Power/Case)
Single
Triple
Approximate
Dimensions
(excluding
mounting plate)
Single
N/A
120 V
0150 V
7.5150 V***
180 V
0.035 VA (maximum) at 120 V
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
85135 Vac
50500 Hz
2 VA Nominal
100135 Vac
50500 Hz
5 VA Nominal
85135 Vac
50500 Hz
2 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
0.5% of Span
0.5% of Span
0.01% / C
0.025% / C
0.01% / C
0.025% / C
-20 C to +60 C
0 C to +50 C
-20 C to +60 C
0 C to +50 C
Compliance Voltage
10 Vdc
Response Time
Standard Calibration
Adjustments
Gain
Zero
< 1% RO
1% of Span
< 1% RO
1% of Span
5% of Reading (minimum)
20% of Span (minimum)
0.1% of RO
5% of Zero Point (minimum)
2 :1 (maximum)
0.1% RO,
Noncumulative
0.1% RO,
Noncumulative
0.15% of Span,
Noncumulative
0.15% of Span,
Noncumulative
095% Noncondensing
Isolation
Approximate Dimensions
(excluding mounting plate)
Crest Factor
010,000
5% of Reading (minimum)
20% of Span (minimum)
0.1% of RO
5% of Zero Point (minimum)
Frequency Range
Stability (per year)
10 Vdc
010,000
Load
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
2 lbs., 1 oz. (0.9 kg)
Phone: 1-800-274-5368
Fax: 585-454-7805
32
SCI Transducer Cat. 1-51(MTD)
N/A
Surge Withstand
Maximum
Net Weight
P-Option* Volts
(Voltage Transducer)
01 mAdc Volts
(Voltage Transducer)
5A
05 A
0.256 A**
15 A
250 A
0.2 VA (maximum) at 5 A
Dielectric Withstand
ANSI/IEEE C37.90.1
Triple
P-Option* Amps
(Current Transducer)
Operating Humidity
Complete
(Input/Output/Case)
2500 VRMS** at 60 Hz
Dielectric Withstand
Voltage
Input
01 mAdc Amps
(Current Transducer)
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
< 0.25% RO
Frequency Range
Specifications
P-Option* Volts
(Voltage Transducer)
Exceltronic
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
Specifications
Exceltronic AC True-RMS
Current or Voltage Transducers
Phone: 1-800-274-5368
Fax: 585-454-7805
33
32-33
1/9/02, 5:24 PM
Ordering Procedure
Exceltronic AC Average-Sensing &
True-RMS Current or Voltage Transducers
Ordering Procedure
Exceltronic AC Average-Sensing &
True-RMS Current or Voltage Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
Description
Input Range
Frequency Range
Burden
0-1 mAdc
output
Output
Auxiliary
Power
Table 1
Table 2
Table 3
Current or
-RS/Freq.
Voltage Input Option #1
Table 4
Table 5
Option
#2
Option
#3
Ext. Aux.
Power
Table 6
Table 6
Table 3
VT110A2
-1
VT110
PAN7
A4
-RS
-SM
Specify
output
voltage
(P-Option Units)
A2** (leave blank)
A4
-SC
Specify
input
value
85-135 Vac
50-500 Hz
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
2 VA
VT110A2-1-RS-SM-SC
0-1 mAdc Average-Sensing Voltage Transducer with 0.25% accuracy, 240 V input, resistor scaling (converts current
output to voltage output), seismic brace, special calibration (example: 360 V).
VT110PAN7A4-1-RS-SM-SC
4-20 mAdc Average-Sensing Voltage Transducer, internal auxiliary power, 240 V input, resistor scaling (converts current
output to voltage output), seismic brace, special calibration (example: 360 V).
Output
Option
-3
Std.***
-5
-8****
Nominal
1A
5A
10 A
25 A
Current Range
0-2 A
0-10 A
0-20 A
0-30 A
(5 A Nominal Input)
1 A/Element
5 A/Element
10 A/Element
25 A/Element
Exceltronic
P-Option
outputs
Calibration at Rated
Option
Std.***
-1
-2
Nominal
120 V
240 V
480 V
Voltage Range
0-150 V
0-300 V
0-600 V
**** Option -8 requires a larger case: Style II case for Models CT510A2 and CT510A4; Style I case for Models 4044 and
4074. (See page 132 for case dimensions. Maximum height of terminal strip(s) is 1.07" on units with -8 option.)
Voltage
Model No.
Description
Current
Voltage
VT110A2*
VT110A4*
3588
3588A4*
3567A
5A
5A
5A
5A
5A
150 V
150 V
150 V
150 V
150 V
VT110
3588
3567
5A
5A
5A
150 V
150 V
150 V
CT510A2*
CT510A4*
4044
4044A4*
4074A
(P-Option Units)
CT510
4044
4074
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
Description
Scaling Resistor
400 Hz
50 Hz (not UL Recognized)
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
-SC
-SM
-Z
Description
24 Vdc Loop-Powered (PA7 models only)
(consult factory for specificationsrequires a Style III
case; see page 122 for case dimensions)
Special Calibration (voltage units only)
(consult factory for special calibration
on current units)
Seismic Brace
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units)
34
SCI Transducer Cat. 1-51(MTD)
Option
-24
Option
-RS
-6
-12
-6-RS
-12-RS
Phone: 1-800-274-5368
Fax: 585-454-7805
35
34-35
1/9/02, 5:24 PM
Ordering Procedure
Exceltronic AC Average-Sensing &
True-RMS Current or Voltage Transducers
Ordering Procedure
Exceltronic AC Average-Sensing &
True-RMS Current or Voltage Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
Description
Input Range
Frequency Range
Burden
0-1 mAdc
output
Output
Auxiliary
Power
Table 1
Table 2
Table 3
Current or
-RS/Freq.
Voltage Input Option #1
Table 4
Table 5
Option
#2
Option
#3
Ext. Aux.
Power
Table 6
Table 6
Table 3
VT110A2
-1
VT110
PAN7
A4
-RS
-SM
Specify
output
voltage
(P-Option Units)
A2** (leave blank)
A4
-SC
Specify
input
value
85-135 Vac
50-500 Hz
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
2 VA
VT110A2-1-RS-SM-SC
0-1 mAdc Average-Sensing Voltage Transducer with 0.25% accuracy, 240 V input, resistor scaling (converts current
output to voltage output), seismic brace, special calibration (example: 360 V).
VT110PAN7A4-1-RS-SM-SC
4-20 mAdc Average-Sensing Voltage Transducer, internal auxiliary power, 240 V input, resistor scaling (converts current
output to voltage output), seismic brace, special calibration (example: 360 V).
Output
Option
-3
Std.***
-5
-8****
Nominal
1A
5A
10 A
25 A
Current Range
0-2 A
0-10 A
0-20 A
0-30 A
(5 A Nominal Input)
1 A/Element
5 A/Element
10 A/Element
25 A/Element
Exceltronic
P-Option
outputs
Calibration at Rated
Option
Std.***
-1
-2
Nominal
120 V
240 V
480 V
Voltage Range
0-150 V
0-300 V
0-600 V
**** Option -8 requires a larger case: Style II case for Models CT510A2 and CT510A4; Style I case for Models 4044 and
4074. (See page 132 for case dimensions. Maximum height of terminal strip(s) is 1.07" on units with -8 option.)
Voltage
Model No.
Description
Current
Voltage
VT110A2*
VT110A4*
3588
3588A4*
3567A
5A
5A
5A
5A
5A
150 V
150 V
150 V
150 V
150 V
VT110
3588
3567
5A
5A
5A
150 V
150 V
150 V
CT510A2*
CT510A4*
4044
4044A4*
4074A
(P-Option Units)
CT510
4044
4074
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
Description
Scaling Resistor
400 Hz
50 Hz (not UL Recognized)
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
-SC
-SM
-Z
Description
24 Vdc Loop-Powered (PA7 models only)
(consult factory for specificationsrequires a Style III
case; see page 122 for case dimensions)
Special Calibration (voltage units only)
(consult factory for special calibration
on current units)
Seismic Brace
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units)
34
SCI Transducer Cat. 1-51(MTD)
Option
-24
Option
-RS
-6
-12
-6-RS
-12-RS
Phone: 1-800-274-5368
Fax: 585-454-7805
35
34-35
1/9/02, 5:24 PM
Specifications
Exceltronic AC ExpandedScale Voltage Transducers
Harmonics
The harmonic performance for Scientific Columbus watt or var transducers is excellent. The design of
the watt transducer makes it an inherently true-RMS device, as the multiplication of current and voltage
results in the square term necessary for the computation. In addition, the analog nature of Scientific
Columbus devices gives them an inherently better performance than many digital-sampling devices. Our
data shows accurate readings by Scientific Columbus watt transducers up to the 15th-order harmonic.
Voltage
Input
01 mAdc Volts
(Expanded-Scale Voltage Transducer)
Span/Range
Overload Continuous
Burden/Element
P-Option* Volts
(Expanded-Scale Voltage Transducer)
None Required
100130 Vac
50500 Hz
3 VA Nominal
0.007% / C
0.015% / C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
Load
010,000
< 2.5% RO
5% of Span
5% of Span
20% of Span
5% of Span
Response Time
Standard Calibration
Adjustments
Gain
Zero
Frequency Range
5565 Hz
Operating Humidity
Isolation
Complete (Input/Output/Case)
Dielectric Withstand
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Exceltronic
Specifications
The same holds true for Scientific Columbus var transducers. A var transducer also calculates a true-RMS
value, multiplying the current by the voltage, shifted 90 degrees in phase. As long as the frequency of the
voltage signal remains at 60 Hz and the voltage signal remains clean (i.e., no harmonics), a true-RMS signal
results. Since most harmonic content appears on the current axis, this method produces accurate signals
for most users.
For more information on transducers and their performance in the presence of harmonics, or for
assistance in selecting the proper transducer for your application, please consult the factory at
1-800-274-5368 (U.S. and Canada).
Phone: 1-800-274-5368
Fax: 585-454-7805
36
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
37
36-37
1/9/02, 5:24 PM
Specifications
Exceltronic AC ExpandedScale Voltage Transducers
Harmonics
The harmonic performance for Scientific Columbus watt or var transducers is excellent. The design of
the watt transducer makes it an inherently true-RMS device, as the multiplication of current and voltage
results in the square term necessary for the computation. In addition, the analog nature of Scientific
Columbus devices gives them an inherently better performance than many digital-sampling devices. Our
data shows accurate readings by Scientific Columbus watt transducers up to the 15th-order harmonic.
Voltage
Input
01 mAdc Volts
(Expanded-Scale Voltage Transducer)
Span/Range
Overload Continuous
Burden/Element
P-Option* Volts
(Expanded-Scale Voltage Transducer)
None Required
100130 Vac
50500 Hz
3 VA Nominal
0.007% / C
0.015% / C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
Load
010,000
< 2.5% RO
5% of Span
5% of Span
20% of Span
5% of Span
Response Time
Standard Calibration
Adjustments
Gain
Zero
Frequency Range
5565 Hz
Operating Humidity
Isolation
Complete (Input/Output/Case)
Dielectric Withstand
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Exceltronic
Specifications
The same holds true for Scientific Columbus var transducers. A var transducer also calculates a true-RMS
value, multiplying the current by the voltage, shifted 90 degrees in phase. As long as the frequency of the
voltage signal remains at 60 Hz and the voltage signal remains clean (i.e., no harmonics), a true-RMS signal
results. Since most harmonic content appears on the current axis, this method produces accurate signals
for most users.
For more information on transducers and their performance in the presence of harmonics, or for
assistance in selecting the proper transducer for your application, please consult the factory at
1-800-274-5368 (U.S. and Canada).
Phone: 1-800-274-5368
Fax: 585-454-7805
36
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
37
36-37
1/9/02, 5:24 PM
Ordering Procedure
Exceltronic AC ExpandedScale Voltage Transducers
Ordering Procedure
Exceltronic AC ExpandedScale Voltage Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
Description
Input Range
Frequency Range
Burden
Output
Auxiliary
Power
Input Range
Table 1
Table 2
Table 3
Table 4
External
Aux. Power
None Required
(P-Option Units)
A2* (leave blank)
A4**
0-1 mAdc
output
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
90150 V
* For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
P-Option
outputs
PAN7
A4
** If the A4 option is selected, the voltage measurement range must stay within the Auxiliary Power Input Range of 84-108% of the Nominal Aux. Power
Voltage. For example, if the Nominal Aux. Power Voltage is 120 Vac, the Auxiliary Power Input Range must be 100-130 Vac in order to be within
84-108% of 120 Vac.
100130 V
Exceltronic
3545
Measurement Range***
90-150 V
180-300 V
360-600 V
3545 90-150 V
0-1 mAdc Expanded-Scale Voltage Transducer, 90-150 V input range.
3545PAN7A4 100-130 V
4-20 mAdc Expanded-Scale Voltage Transducer, internal auxiliary power, 100-130 V input range.
Customer-Specified Span****
20-60 V
40-120 V
80-240 V
Description
Expanded-Scale Voltage, Average Sensing, Single Unit
Please consult the factory if you require any options with Expanded-Scale Voltage Transducers.
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
38
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
39
38-39
1/9/02, 5:25 PM
Ordering Procedure
Exceltronic AC ExpandedScale Voltage Transducers
Ordering Procedure
Exceltronic AC ExpandedScale Voltage Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
Description
Input Range
Frequency Range
Burden
Output
Auxiliary
Power
Input Range
Table 1
Table 2
Table 3
Table 4
External
Aux. Power
None Required
(P-Option Units)
A2* (leave blank)
A4**
0-1 mAdc
output
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
90150 V
* For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
P-Option
outputs
PAN7
A4
** If the A4 option is selected, the voltage measurement range must stay within the Auxiliary Power Input Range of 84-108% of the Nominal Aux. Power
Voltage. For example, if the Nominal Aux. Power Voltage is 120 Vac, the Auxiliary Power Input Range must be 100-130 Vac in order to be within
84-108% of 120 Vac.
100130 V
Exceltronic
3545
Measurement Range***
90-150 V
180-300 V
360-600 V
3545 90-150 V
0-1 mAdc Expanded-Scale Voltage Transducer, 90-150 V input range.
3545PAN7A4 100-130 V
4-20 mAdc Expanded-Scale Voltage Transducer, internal auxiliary power, 100-130 V input range.
Customer-Specified Span****
20-60 V
40-120 V
80-240 V
Description
Expanded-Scale Voltage, Average Sensing, Single Unit
Please consult the factory if you require any options with Expanded-Scale Voltage Transducers.
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
38
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
39
38-39
1/9/02, 5:25 PM
Wiring Diagrams
Exceltronic AC Current or
Voltage Transducers
Transducer Accuracy
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Styles III & II Cases) AND P-OPTION UNITS (Styles I & V Cases)
0-1 mAdc Units
Triple Current or Voltage (Style II Case)
DC
DC
AC
INPUT
DC
It would be ideal if a measurement device could be specified as a percent-of-reading device; then the uncertainty of any reading would always be known and constant. However, in practical use, a transducer cannot
be specified strictly as a percent-of-reading device. All electronic circuits have an inherent offset error,
which is accounted for by adding a constant error term (such as % RO) to the accuracy specification. At
Scientific Columbus, we express the total accuracy of our transducers as the percent of reading plus the
offset error. For example, the accuracy of our typical current transducer (CT510A2) is 0.15% Reading +
0.1% RO.
- OUTPUT
AC
INPUT
- OUTPUT
AC
INPUT
AC
INPUT
- OUTPUT
+
1
Exceltronic
1
A
DC
OUTPUT
Accuracy, as defined in this catalog, is the degree of uncertainty with which a measured value agrees with
the ideal value. So, to understand accuracy, we must first define uncertainty.
There are basically two ways to quantify uncertainty in a measured value: as a percentage of the measured
value (reading) that varies with the input, or as a percentage of a fixed value. This fixed value can be
either rated output (RO) or full scale, which results in a constant uncertainty over the range of inputs. The
less the absolute value of the uncertainty, the more accurate the device.
AC
INPUT
DC
OUTPUT
The chart below depicts the maximum uncertainty for a CT510A2 transducer compared with two competitive units. The operation of the devices is graphed from several input values. Each plot represents a
different method of specifying transducer accuracy. Scientific Columbus CT510A2 accuracy is shown in
bold.
Example: CT510A2 - Nominal: 5 Amps, Full Scale: 10 Amps
P-Option Units
AC
INPUT
EXTERNAL
AUX. POWER
DC
OUTPUT
AC
INPUT
+
1
6
A PHASE
C PHASE
DC
OUTPUT
B PHASE
AC
INPUT
DC
OUTPUT
Maximum Uncertainty
(% of Input Signal)
DC
OUTPUT
AC
INPUT
EXTERNAL
AUX. POWER
Adj t
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
40
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
41
40-41
1/9/02, 5:25 PM
Wiring Diagrams
Exceltronic AC Current or
Voltage Transducers
Transducer Accuracy
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Styles III & II Cases) AND P-OPTION UNITS (Styles I & V Cases)
0-1 mAdc Units
Triple Current or Voltage (Style II Case)
DC
DC
AC
INPUT
DC
It would be ideal if a measurement device could be specified as a percent-of-reading device; then the uncertainty of any reading would always be known and constant. However, in practical use, a transducer cannot
be specified strictly as a percent-of-reading device. All electronic circuits have an inherent offset error,
which is accounted for by adding a constant error term (such as % RO) to the accuracy specification. At
Scientific Columbus, we express the total accuracy of our transducers as the percent of reading plus the
offset error. For example, the accuracy of our typical current transducer (CT510A2) is 0.15% Reading +
0.1% RO.
- OUTPUT
AC
INPUT
- OUTPUT
AC
INPUT
AC
INPUT
- OUTPUT
+
1
Exceltronic
1
A
DC
OUTPUT
Accuracy, as defined in this catalog, is the degree of uncertainty with which a measured value agrees with
the ideal value. So, to understand accuracy, we must first define uncertainty.
There are basically two ways to quantify uncertainty in a measured value: as a percentage of the measured
value (reading) that varies with the input, or as a percentage of a fixed value. This fixed value can be
either rated output (RO) or full scale, which results in a constant uncertainty over the range of inputs. The
less the absolute value of the uncertainty, the more accurate the device.
AC
INPUT
DC
OUTPUT
The chart below depicts the maximum uncertainty for a CT510A2 transducer compared with two competitive units. The operation of the devices is graphed from several input values. Each plot represents a
different method of specifying transducer accuracy. Scientific Columbus CT510A2 accuracy is shown in
bold.
Example: CT510A2 - Nominal: 5 Amps, Full Scale: 10 Amps
P-Option Units
AC
INPUT
EXTERNAL
AUX. POWER
DC
OUTPUT
AC
INPUT
+
1
6
A PHASE
C PHASE
DC
OUTPUT
B PHASE
AC
INPUT
DC
OUTPUT
Maximum Uncertainty
(% of Input Signal)
DC
OUTPUT
AC
INPUT
EXTERNAL
AUX. POWER
Adj t
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
40
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
41
40-41
1/9/02, 5:25 PM
SCIENTIFIC
Exceltronic AC Watt or Var Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC AC WATT OR VAR TRANSDUCERS
Features
Specifications
Applications
Outputs
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
0 to 1 mAdc Watts
(Watt Transducer)
120 V
0150 V
200 V
0.035 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
Temperature Effect on Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Substation monitoring
0 to 1 mAdc
Exceptional reliability
SCADA
15 or 135 mAdc
Load
010,000
Energy-management
systems
< 0.5% RO
< 0.25% RO
Response Time
Distribution monitoring
Compliance Voltage
10 Vdc
Standard Calibration
Adjustments
Gain
Zero
0.15% VA (maximum)
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
0.1% RO,
Noncumulative
Approximate Dimensions
(excluding mounting plate)
Overrange with Linearity
0.25% of Span,
Noncumulative
0.2% RO,
Noncumulative
Complete (Input/Output/Power/Case)
2500 VRMS*** at 60 Hz
Surge Withstand
Maximum Net Weight
60 Hz
0.15% of Span,
Noncumulative
095% Noncondensing
Dielectric Withstand
< 0.25% RO
0.1% VA (maximum)
Isolation
< 0.5% RO
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Operating Humidity
010,000
Any
Frequency Range
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
10 Vdc
Power Factor
PF Effect on Accuracy
Process control
P-Option* Vars
(Var Transducer)
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
0 to 1 mAdc Vars
(Var Transducer)
P-Option* Watts
(Watt Transducer)
Exceltronic
ANSI/IEEE C37.90.1
3 lbs., 5 oz. (1.5 kg)
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
42
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
43
42-43
1/9/02, 5:25 PM
SCIENTIFIC
Exceltronic AC Watt or Var Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC AC WATT OR VAR TRANSDUCERS
Features
Specifications
Applications
Outputs
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
0 to 1 mAdc Watts
(Watt Transducer)
120 V
0150 V
200 V
0.035 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
Temperature Effect on Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Substation monitoring
0 to 1 mAdc
Exceptional reliability
SCADA
15 or 135 mAdc
Load
010,000
Energy-management
systems
< 0.5% RO
< 0.25% RO
Response Time
Distribution monitoring
Compliance Voltage
10 Vdc
Standard Calibration
Adjustments
Gain
Zero
0.15% VA (maximum)
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
0.1% RO,
Noncumulative
Approximate Dimensions
(excluding mounting plate)
Overrange with Linearity
0.25% of Span,
Noncumulative
0.2% RO,
Noncumulative
Complete (Input/Output/Power/Case)
2500 VRMS*** at 60 Hz
Surge Withstand
Maximum Net Weight
60 Hz
0.15% of Span,
Noncumulative
095% Noncondensing
Dielectric Withstand
< 0.25% RO
0.1% VA (maximum)
Isolation
< 0.5% RO
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Operating Humidity
010,000
Any
Frequency Range
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
10 Vdc
Power Factor
PF Effect on Accuracy
Process control
P-Option* Vars
(Var Transducer)
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
0 to 1 mAdc Vars
(Var Transducer)
P-Option* Watts
(Watt Transducer)
Exceltronic
ANSI/IEEE C37.90.1
3 lbs., 5 oz. (1.5 kg)
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
42
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
43
42-43
1/9/02, 5:25 PM
Ordering Procedure
Exceltronic AC Watt or
Var Transducers
Ordering Procedure
Exceltronic AC Watt or
Var Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
Output
Auxiliary
Power
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
External
Aux. Power
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 6
Table 6
Table 3
0 to 1 mAdc
output
Description
A2**
A4
(P-Option Units)
A2** (leave blank)
A4
A2
Input Range
Frequency Range
Burden
(0 to 1 mAdc Units)
85-135 Vac
50-500 Hz
70-112% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
6 VA
6 VA
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
XL342K5
-5
-1
-RS
-SM
-SC
PAN7
Specify
output
voltage
A4
Specify
input
value
EXAMPLES:
XL342K5A2-5-1-RS-SM-SC
3-element, 0 to 1 mAdc Watt Transducer; 120 Vac external auxiliary power; 10 A input; 240 V input; resistor scaling
(converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
XL342K5PAN7A4-5-1-RS-SM-SC
3-element, 4-20 mAdc Watt Transducer; internal auxiliary power; 10 A input; 240 V input; resistor scaling (converts current
output to voltage output); seismic brace; special calibration (example: 7200 W).
Element
1
11/2*
2
21/2*
3
Var
Model No.
XLV5C5
XLV5C511/2
XLV31K5
XLV31K521/2
XLV342K5
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Nominal
69 V
120 V
240 V
277 V
480 V
Option
-RS
-6
-12
-6-RS
-12-RS
Description
Scaling Resistor
400 Hz
50 Hz (not UL Recognized)
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
P-Option
PAN6
PAN7
PAN8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
PAN6-B
PAN7-B
PAN8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
PA6
PA7
PA8
Phone: 1-800-274-5368
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
Fax: 585-454-7805
Option
-20
-21
-24
-CE
-SC
-SM
-Z
Description
50-200% Calibration Adjustment (current outputs)
50-200% Calibration Adjustment (voltage outputs)
(available only with 0 to 1 mAdc units)
24 Vdc Loop-Powered (PA7 and PA7-B models only)
(consult factory for specifications)
Analog Output Shorting Relay
(available only with 0 to 1 mAdc units)
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units, except PAN-B
models)
44
SCI Transducer Cat. 1-51(MTD)
Option
-0
Std.***
-1
-9
-2
PA6-B
PA7-B
PA8-B
Option
-3
-4
Std.***
-11
-5
15 A
-8****
Voltage
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
0 to 1 mAdc output is
standard, and is specified
by the Base Model
Numbers. For outputs
other than 0 to 1 mAdc,
indicate the appropriate
P-Option in the "Output"
position of the complete
model number.
Current
Current Range
Calibration at Rated Output
Nominal
w/ Accuracy
(5 A Nominal Input)
1A
0-2 A
100 W or Vars/Element
2.5 A
0-5 A
250 W or Vars/Element
5A
0-10 A
500 W or Vars/Element
7.5 A
0-15 A
750 W or Vars/Element
10 A
0-20 A
1000 W or Vars/Element
0-20 A1500 W or Vars/Element
25 A
0-30 A
2500 W or Vars/Element
Exceltronic
P-Option
outputs
Phone: 1-800-274-5368
Fax: 585-454-7805
45
44-45
1/9/02, 5:25 PM
Ordering Procedure
Exceltronic AC Watt or
Var Transducers
Ordering Procedure
Exceltronic AC Watt or
Var Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
Output
Auxiliary
Power
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
External
Aux. Power
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 6
Table 6
Table 3
0 to 1 mAdc
output
Description
A2**
A4
(P-Option Units)
A2** (leave blank)
A4
A2
Input Range
Frequency Range
Burden
(0 to 1 mAdc Units)
85-135 Vac
50-500 Hz
70-112% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
6 VA
6 VA
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
XL342K5
-5
-1
-RS
-SM
-SC
PAN7
Specify
output
voltage
A4
Specify
input
value
EXAMPLES:
XL342K5A2-5-1-RS-SM-SC
3-element, 0 to 1 mAdc Watt Transducer; 120 Vac external auxiliary power; 10 A input; 240 V input; resistor scaling
(converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
XL342K5PAN7A4-5-1-RS-SM-SC
3-element, 4-20 mAdc Watt Transducer; internal auxiliary power; 10 A input; 240 V input; resistor scaling (converts current
output to voltage output); seismic brace; special calibration (example: 7200 W).
Element
1
11/2*
2
21/2*
3
Var
Model No.
XLV5C5
XLV5C511/2
XLV31K5
XLV31K521/2
XLV342K5
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Nominal
69 V
120 V
240 V
277 V
480 V
Option
-RS
-6
-12
-6-RS
-12-RS
Description
Scaling Resistor
400 Hz
50 Hz (not UL Recognized)
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
P-Option
PAN6
PAN7
PAN8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
PAN6-B
PAN7-B
PAN8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
PA6
PA7
PA8
Phone: 1-800-274-5368
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
Fax: 585-454-7805
Option
-20
-21
-24
-CE
-SC
-SM
-Z
Description
50-200% Calibration Adjustment (current outputs)
50-200% Calibration Adjustment (voltage outputs)
(available only with 0 to 1 mAdc units)
24 Vdc Loop-Powered (PA7 and PA7-B models only)
(consult factory for specifications)
Analog Output Shorting Relay
(available only with 0 to 1 mAdc units)
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units, except PAN-B
models)
44
SCI Transducer Cat. 1-51(MTD)
Option
-0
Std.***
-1
-9
-2
PA6-B
PA7-B
PA8-B
Option
-3
-4
Std.***
-11
-5
15 A
-8****
Voltage
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
0 to 1 mAdc output is
standard, and is specified
by the Base Model
Numbers. For outputs
other than 0 to 1 mAdc,
indicate the appropriate
P-Option in the "Output"
position of the complete
model number.
Current
Current Range
Calibration at Rated Output
Nominal
w/ Accuracy
(5 A Nominal Input)
1A
0-2 A
100 W or Vars/Element
2.5 A
0-5 A
250 W or Vars/Element
5A
0-10 A
500 W or Vars/Element
7.5 A
0-15 A
750 W or Vars/Element
10 A
0-20 A
1000 W or Vars/Element
0-20 A1500 W or Vars/Element
25 A
0-30 A
2500 W or Vars/Element
Exceltronic
P-Option
outputs
Phone: 1-800-274-5368
Fax: 585-454-7805
45
44-45
1/9/02, 5:25 PM
Wiring Diagrams
Exceltronic AC Watt or
Var Transducers
Wiring Diagrams
Exceltronic AC Watt or
Var Transducers
LINE
L1
L2
L1
DC
OUTPUT
LINE
N
LINE
L1
L2
DC
OUTPUT
10
11
12
10
11
12
DC
OUTPUT
10
11
12
LOAD
EXTERNAL
AUX. POWER
LINE
L2
10
11
12
10
DC
OUTPUT
10
11
12
LOAD
L1
L3
DC
OUTPUT
LINE
L2
10
11
12
10
11
12
11
12
LOAD
LOAD
LOAD
EXTERNAL
AUX. POWER
LINE
L1
DC
OUTPUT
L1
LINE
L2
L3
DC
OUTPUT
L2
L3
L1
6A
DC
OUTPUT
DC
OUTPUT
10
11
EXT.
AUX.
POWER
12 12A
10
11
6A
6A
EXTERNAL
AUX. POWER
10
11
12
12A
10
11
12
12A
12 12A
LOAD
LOAD
LOAD
LOAD
Adj t
Adjust
Phone: 1-800-274-5368
Adjust
Fax: 585-454-7805
46
SCI Transducer Cat. 1-51(MTD)
EXTERNAL
AUX. POWER
L3
6A
EXT.
AUX.
POWER
L2
L3
EXTERNAL
AUX. POWER
LOAD
LINE
L2
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
L3
DC
OUTPUT
L1
L3
DC
OUTPUT
EXTERNAL
AUX. POWER
LINE
N
LOAD
DC
OUTPUT
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L1
L2
Exceltronic
Phone: 1-800-274-5368
Fax: 585-454-7805
47
46-47
1/9/02, 5:25 PM
Wiring Diagrams
Exceltronic AC Watt or
Var Transducers
Wiring Diagrams
Exceltronic AC Watt or
Var Transducers
LINE
L1
L2
L1
DC
OUTPUT
LINE
N
LINE
L1
L2
DC
OUTPUT
10
11
12
10
11
12
DC
OUTPUT
10
11
12
LOAD
EXTERNAL
AUX. POWER
LINE
L2
10
11
12
10
DC
OUTPUT
10
11
12
LOAD
L1
L3
DC
OUTPUT
LINE
L2
10
11
12
10
11
12
11
12
LOAD
LOAD
LOAD
EXTERNAL
AUX. POWER
LINE
L1
DC
OUTPUT
L1
LINE
L2
L3
DC
OUTPUT
L2
L3
L1
6A
DC
OUTPUT
DC
OUTPUT
10
11
EXT.
AUX.
POWER
12 12A
10
11
6A
6A
EXTERNAL
AUX. POWER
10
11
12
12A
10
11
12
12A
12 12A
LOAD
LOAD
LOAD
LOAD
Adj t
Adjust
Phone: 1-800-274-5368
Adjust
Fax: 585-454-7805
46
SCI Transducer Cat. 1-51(MTD)
EXTERNAL
AUX. POWER
L3
6A
EXT.
AUX.
POWER
L2
L3
EXTERNAL
AUX. POWER
LOAD
LINE
L2
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
L3
DC
OUTPUT
L1
L3
DC
OUTPUT
EXTERNAL
AUX. POWER
LINE
N
LOAD
DC
OUTPUT
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L1
L2
Exceltronic
Phone: 1-800-274-5368
Fax: 585-454-7805
47
46-47
1/9/02, 5:25 PM
SCIENTIFIC
Exceltronic Combined
AC Watt/Var Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC COMBINED AC WATT/VAR TRANSDUCERS
Specifications
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Applications
Outputs
Energy-management
systems
Process control
0 to 1 mAdc
15 or 135 mAdc
420 or 41220 mAdc
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
120 V
0150 V
200 V
0.035 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Load
10 Vdc
20 Vdc
10 Vdc
20 Vdc
010,000
010,000
< 0.5% RO
< 0.25% RO
< 0.5% RO
< 0.25% RO
Power Factor
Any
PF Effect on Accuracy
Standard Calibration
Adjustments
Gain
Zero
0.1% VA (maximum)
0.15% VA (maximum)
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Frequency
Stability (per year)
60 Hz
0.1% RO,
Noncumulative
Operating Humidity
0.25% of Span,
Noncumulative
2500 VRMS*** at 60 Hz
ANSI/IEEE C37.90.1
Surge Withstand
Approximate Dimensions
(excluding mounting plate)
0.2% RO,
Noncumulative
Complete (Input/Output/Power/Case)
Dielectric Withstand
Maximum Net Weight
0.15% of Span,
Noncumulative
095% Noncondensing
Isolation
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
P-Option* Vars
(Combined Watt/Var
Transducer)
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
Features
0 to 1 mAdc Vars
(Combined Watt/Var
Transducer)
P-Option* Watts
(Combined Watt/Var
Transducer)
Exceltronic
Current
Input
0 to 1 mAdc Watts
(Combined Watt/Var
Transducer)
4.4" W x 3.9" D x 6.3" H (112 mm x 99 mm x 160 mm) Style IV Case, see page 123
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
48
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
49
48-49
1/9/02, 5:25 PM
SCIENTIFIC
Exceltronic Combined
AC Watt/Var Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC COMBINED AC WATT/VAR TRANSDUCERS
Specifications
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Applications
Outputs
Energy-management
systems
Process control
0 to 1 mAdc
15 or 135 mAdc
420 or 41220 mAdc
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
120 V
0150 V
200 V
0.035 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Load
10 Vdc
20 Vdc
10 Vdc
20 Vdc
010,000
010,000
< 0.5% RO
< 0.25% RO
< 0.5% RO
< 0.25% RO
Power Factor
Any
PF Effect on Accuracy
Standard Calibration
Adjustments
Gain
Zero
0.1% VA (maximum)
0.15% VA (maximum)
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Frequency
Stability (per year)
60 Hz
0.1% RO,
Noncumulative
Operating Humidity
0.25% of Span,
Noncumulative
2500 VRMS*** at 60 Hz
ANSI/IEEE C37.90.1
Surge Withstand
Approximate Dimensions
(excluding mounting plate)
0.2% RO,
Noncumulative
Complete (Input/Output/Power/Case)
Dielectric Withstand
Maximum Net Weight
0.15% of Span,
Noncumulative
095% Noncondensing
Isolation
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
P-Option* Vars
(Combined Watt/Var
Transducer)
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
Features
0 to 1 mAdc Vars
(Combined Watt/Var
Transducer)
P-Option* Watts
(Combined Watt/Var
Transducer)
Exceltronic
Current
Input
0 to 1 mAdc Watts
(Combined Watt/Var
Transducer)
4.4" W x 3.9" D x 6.3" H (112 mm x 99 mm x 160 mm) Style IV Case, see page 123
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
Phone: 1-800-274-5368
Fax: 585-454-7805
48
SCI Transducer Cat. 1-51(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
49
48-49
1/9/02, 5:25 PM
Ordering Procedure
Exceltronic Combined
AC Watt/Var Transducers
Ordering Procedure
Exceltronic Combined
AC Watt/Var Transducers
ORDERING PROCEDURE
Option
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Description
Output
Auxiliary
Power
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
Ext. Aux.
Power
A2**
A4
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 6
Table 6
Table 3
(P-Option Units)
A2** (leave blank)
A4
0 to 1 mAdc
output
85-135 Vac
50-500 Hz
70-112% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
6 VA
6 VA
-1
-RS
Specify
output
voltage
A4
PAN7
-SM
-SC
Specify
input
value
If other than
120 Vac (std.),
specify ext.
aux. power
voltage:
69 Vac Aux.,
240 Vac Aux.,
277 Vac Aux.,
or 480 Vac Aux.
XLWV342K5A2-5-1-RS-SM-SC
3-element, 0 to 1 mAdc Watt/Var Transducer; 120 Vac external auxiliary power; 10 A input; 240 V input;
resistor scaling (converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
XLWV342K5PAN7A4-5-1-RS-SM-SC
3-element, 4-20 mAdc Watt/Var Transducer; internal auxiliary power; 10 A input; 240 V input; resistor scaling
(converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Current
Output
Option
-3
-4
Std.***
-11
-5
-7
(5 A Nominal Input)
100 W or Vars/Element
250 W or Vars/Element
500 W or Vars/Element
750 W or Vars/Element
1000 W or Vars/Element
1500 W or Vars/Element
Option
-0
Std.***
-1
-9
-2
Nominal
69 V
120 V
240 V
277 V
480 V
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
Calibration at Rated
(120 V Nominal Input)
250 W or Vars/Element
500 W or Vars/Element
1000 W or Vars/Element
1200 W or Vars/Element
2000 W or Vars/Element
Description
Scaling Resistor
400 Hz
50 Hz (not UL Recognized)
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
Output Range
1-5 mAdc
4-20 mAdc
Compliance Voltage/
Maximum Load
20 Vdc/4000
20 Vdc/1000
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
PAN6-B
PAN7-B
1-3-5 mAdc
4-12-20 mAdc
20 Vdc/4000
20 Vdc/1000
30 Vdc
30 Vdc
Option
-20
-C2
-CE
-SC
-SM
-UB
-Z
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
Voltage Range
P-Option
PAN6
PAN7
-C4
Voltage
Current Range
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
Option
-RS
-6
-12
-6-RS
-12-RS
Exceltronic
-5
Phone: 1-800-274-5368
Fax: 585-454-7805
Description
You must specify the desired input value:
50-200% Calibration Adjustment (current outputs)
0 to 1 mAdc units can be calibrated within 90-180% of their standardComplete Isolation Between Watt & Var Analog Outputs
calibration input watts or vars. (Example: A 2-element watt/var trans(for units with external auxiliary powerrequires a
ducer is calibrated to 1000 W or vars standard. The -SC option can be
added for input levels from 900 W or vars (90%) to 1800 W or vars
Style I case; see page 122 for case dimensions)
(180%).) P-Option units can be calibrated within 60-180% of their
Complete Isolation Between Watt & Var Analog Outputs
standard-calibration input watts or vars.
(for units with internal auxiliary powerrequires a
This information is not part of the model number, but must be provided
Style I case; see page 122 for case dimensions)
to the factory when you place your order.
Analog Output Shorting Relay
(available only with 0 to 1 mAdc units)
Special Calibration
If you require additional options not shown here, see Special
Seismic Brace (available with 0 to 1 mAdc units)
Options on page 128. When ordering any special options, or
(consult factory if you desire this option with
more than three options, you must first consult the factory for
a P-Option unit)
pricing and delivery estimates.
Combination Unidirectional (watt)/Bidirectional (var)
(available only with P-Option units)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option unidirectional units)
50
SCI Transducer Cat. 1-51(MTD)
Burden
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
P-Option
outputs
Element
1
11/2*
2
21/2*
3
Frequency Range
A2
XLWV342K5
EXAMPLES:
Input Range
(0 to 1 mAdc Units)
Phone: 1-800-274-5368
Fax: 585-454-7805
51
50-51
1/9/02, 5:26 PM
Ordering Procedure
Exceltronic Combined
AC Watt/Var Transducers
Ordering Procedure
Exceltronic Combined
AC Watt/Var Transducers
ORDERING PROCEDURE
Option
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Description
Output
Auxiliary
Power
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
Ext. Aux.
Power
A2**
A4
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 6
Table 6
Table 3
(P-Option Units)
A2** (leave blank)
A4
0 to 1 mAdc
output
85-135 Vac
50-500 Hz
70-112% of Nominal Aux. Power Voltage Equals Input Frequency
3 VA
3 VA
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
6 VA
6 VA
-1
-RS
Specify
output
voltage
A4
PAN7
-SM
-SC
Specify
input
value
If other than
120 Vac (std.),
specify ext.
aux. power
voltage:
69 Vac Aux.,
240 Vac Aux.,
277 Vac Aux.,
or 480 Vac Aux.
XLWV342K5A2-5-1-RS-SM-SC
3-element, 0 to 1 mAdc Watt/Var Transducer; 120 Vac external auxiliary power; 10 A input; 240 V input;
resistor scaling (converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
XLWV342K5PAN7A4-5-1-RS-SM-SC
3-element, 4-20 mAdc Watt/Var Transducer; internal auxiliary power; 10 A input; 240 V input; resistor scaling
(converts current output to voltage output); seismic brace; special calibration (example: 7200 W).
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
Current
Output
Option
-3
-4
Std.***
-11
-5
-7
(5 A Nominal Input)
100 W or Vars/Element
250 W or Vars/Element
500 W or Vars/Element
750 W or Vars/Element
1000 W or Vars/Element
1500 W or Vars/Element
Option
-0
Std.***
-1
-9
-2
Nominal
69 V
120 V
240 V
277 V
480 V
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
Calibration at Rated
(120 V Nominal Input)
250 W or Vars/Element
500 W or Vars/Element
1000 W or Vars/Element
1200 W or Vars/Element
2000 W or Vars/Element
Description
Scaling Resistor
400 Hz
50 Hz (not UL Recognized)
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
Output Range
1-5 mAdc
4-20 mAdc
Compliance Voltage/
Maximum Load
20 Vdc/4000
20 Vdc/1000
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
PAN6-B
PAN7-B
1-3-5 mAdc
4-12-20 mAdc
20 Vdc/4000
20 Vdc/1000
30 Vdc
30 Vdc
Option
-20
-C2
-CE
-SC
-SM
-UB
-Z
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
Voltage Range
P-Option
PAN6
PAN7
-C4
Voltage
Current Range
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
Option
-RS
-6
-12
-6-RS
-12-RS
Exceltronic
-5
Phone: 1-800-274-5368
Fax: 585-454-7805
Description
You must specify the desired input value:
50-200% Calibration Adjustment (current outputs)
0 to 1 mAdc units can be calibrated within 90-180% of their standardComplete Isolation Between Watt & Var Analog Outputs
calibration input watts or vars. (Example: A 2-element watt/var trans(for units with external auxiliary powerrequires a
ducer is calibrated to 1000 W or vars standard. The -SC option can be
added for input levels from 900 W or vars (90%) to 1800 W or vars
Style I case; see page 122 for case dimensions)
(180%).) P-Option units can be calibrated within 60-180% of their
Complete Isolation Between Watt & Var Analog Outputs
standard-calibration input watts or vars.
(for units with internal auxiliary powerrequires a
This information is not part of the model number, but must be provided
Style I case; see page 122 for case dimensions)
to the factory when you place your order.
Analog Output Shorting Relay
(available only with 0 to 1 mAdc units)
Special Calibration
If you require additional options not shown here, see Special
Seismic Brace (available with 0 to 1 mAdc units)
Options on page 128. When ordering any special options, or
(consult factory if you desire this option with
more than three options, you must first consult the factory for
a P-Option unit)
pricing and delivery estimates.
Combination Unidirectional (watt)/Bidirectional (var)
(available only with P-Option units)
Zero-Based Output Calibration (ex.: PAN7-Z = 0-20 mAdc)
(available only with P-Option unidirectional units)
50
SCI Transducer Cat. 1-51(MTD)
Burden
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
P-Option
outputs
Element
1
11/2*
2
21/2*
3
Frequency Range
A2
XLWV342K5
EXAMPLES:
Input Range
(0 to 1 mAdc Units)
Phone: 1-800-274-5368
Fax: 585-454-7805
51
50-51
1/9/02, 5:26 PM
Wiring Diagrams
Exceltronic Combined
AC Watt/Var Transducers
Analog Totalizers
DC
OUTPUT
DC
OUTPUT
2A
L1
LINE
N
In many applications, the need to sum the output of a series of transducers is necessary to help determine
the operation of a total system. Scientific Columbus 9100 Series Analog Totalizers meet this requirement.
For example, the total watts supplied by six separate watt transducers can be summed
(or totalized) to give a total watts value for all six devices. Other quantities that can be measured and
summed include vars, current, and voltage.
L2
+ +
1
+ +
2A
10
11
12 13
10
11
12 13
Up to six inputs
Exceltronic
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
DC
OUTPUT
L1
LINE
L2
+ +
1
2A
For more information on Scientific Columbus 9100 Series Analog Totalizers, please consult the factory at
1-800-274-5368 (U.S. and Canada).
DC
OUTPUT
L3
LINE
L2 L3
+ +
1
2A
10
11
12 13
LINE
L2
L3
2A
DC
OUTPUT
6A
L1
2A
EXT.
AUX.
POWER
10 11 12 13 12A
10
output
analog
input #1
output
analog
input #2
output
analog
input #3
output
analog
input #4
output
analog
input #5
output
analog
input #6
6A
EXT.
AUX.
POWER
LINE
L2
L3
+ +
1
LOAD
+ +
1
12 13
11
EXTERNAL
AUX. POWER
LOAD
DC
OUTPUT
10
11 12 13 12A
LOAD
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
52
SCI Transducer Cat. 52-89(MTD)
TOTALIZED FORM-C
PULSE OUTPUTS
(Wh, Varh, Ah, or Vh)
TOTALIZED FORM-C
PULSE OUTPUTS
(Wh, Varh, Ah, or Vh)
120 Vac
EXTERNAL
AUX. POWER
Adjust
TOTALIZED
ANALOG OUTPUT
EXTERNAL
AUX. POWER
Phone: 1-800-274-5368
Fax: 585-454-7805
53
52-53
1/9/02, 5:27 PM
Wiring Diagrams
Exceltronic Combined
AC Watt/Var Transducers
Analog Totalizers
DC
OUTPUT
DC
OUTPUT
2A
L1
LINE
N
In many applications, the need to sum the output of a series of transducers is necessary to help determine
the operation of a total system. Scientific Columbus 9100 Series Analog Totalizers meet this requirement.
For example, the total watts supplied by six separate watt transducers can be summed
(or totalized) to give a total watts value for all six devices. Other quantities that can be measured and
summed include vars, current, and voltage.
L2
+ +
1
+ +
2A
10
11
12 13
10
11
12 13
Up to six inputs
Exceltronic
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
DC
OUTPUT
L1
LINE
L2
+ +
1
2A
For more information on Scientific Columbus 9100 Series Analog Totalizers, please consult the factory at
1-800-274-5368 (U.S. and Canada).
DC
OUTPUT
L3
LINE
L2 L3
+ +
1
2A
10
11
12 13
LINE
L2
L3
2A
DC
OUTPUT
6A
L1
2A
EXT.
AUX.
POWER
10 11 12 13 12A
10
output
analog
input #1
output
analog
input #2
output
analog
input #3
output
analog
input #4
output
analog
input #5
output
analog
input #6
6A
EXT.
AUX.
POWER
LINE
L2
L3
+ +
1
LOAD
+ +
1
12 13
11
EXTERNAL
AUX. POWER
LOAD
DC
OUTPUT
10
11 12 13 12A
LOAD
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
52
SCI Transducer Cat. 52-89(MTD)
TOTALIZED FORM-C
PULSE OUTPUTS
(Wh, Varh, Ah, or Vh)
TOTALIZED FORM-C
PULSE OUTPUTS
(Wh, Varh, Ah, or Vh)
120 Vac
EXTERNAL
AUX. POWER
Adjust
TOTALIZED
ANALOG OUTPUT
EXTERNAL
AUX. POWER
Phone: 1-800-274-5368
Fax: 585-454-7805
53
52-53
1/9/02, 5:27 PM
SCIENTIFIC
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
COLUMBUS
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Applications
Features
Accuracy to 0.2% of reading
Analog & digital outputs
Excellent long-term stability
Energy-management
systems
Distribution monitoring
Process control
Exceptional reliability
Wide selection of current &
voltage input ranges
Outputs
0 to 1 mAdc Watts
(Watt/Watthour
Transducer)
120 V
0150 V
200 V
0.03 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0200% RO
at 0200% RO
at 0120% RO
at 0120% RO
Accuracy
Temperature Effect on Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
0 to 1 mAdc
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
15 or 135 mAdc
Compliance Voltage
10 Vdc
Load
010,000
< 0.5% RO
< 0.25% RO
< 0.25% RO
< 0.5% RO
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
Standard Calibration
Adjustments
Gain
Zero
0.1% VA (maximum)
0.15% VA (maximum)
1% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
1% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
Frequency Range
Stability (per year)
0.1% RO,
Noncumulative
Operating Humidity
095% Noncondensing
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
Surge Withstand
Phone: 1-800-274-5368
Fax: 585-454-7805
Approximate Dimensions
(excluding mounting plate)
Overrange with Linearity
0.25% of Span,
Noncumulative
0.2% RO,
Noncumulative
Isolation
60 Hz
0.15% of Span,
Noncumulative
Dielectric Withstand
No.
PF Effect on Accuracy
What does this mean? Arent all accuracy specifications the same?
5001000 Vars/Element
500600 Vars/Element
54
SCI Transducer Cat. 52-89(MTD)
010,000
10 Vdc
P-Option* Vars
(Var/Varhour
Transducer)
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Power Factor
0 to 1 mAdc Vars
(Var/Varhour
Transducer)
P-Option* Watts
(Watt/Watthour
Transducer)
Exceltronic
SCIENTIFIC
Specifications
COLUMBUS
Phone: 1-800-274-5368
Fax: 585-454-7805
55
54-55
1/9/02, 5:27 PM
SCIENTIFIC
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
COLUMBUS
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Applications
Features
Accuracy to 0.2% of reading
Analog & digital outputs
Excellent long-term stability
Energy-management
systems
Distribution monitoring
Process control
Exceptional reliability
Wide selection of current &
voltage input ranges
Outputs
0 to 1 mAdc Watts
(Watt/Watthour
Transducer)
120 V
0150 V
200 V
0.03 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
1 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0200% RO
at 0200% RO
at 0120% RO
at 0120% RO
Accuracy
Temperature Effect on Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
0 to 1 mAdc
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
15 or 135 mAdc
Compliance Voltage
10 Vdc
Load
010,000
< 0.5% RO
< 0.25% RO
< 0.25% RO
< 0.5% RO
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
Standard Calibration
Adjustments
Gain
Zero
0.1% VA (maximum)
0.15% VA (maximum)
1% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
1% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
5862 Hz
Frequency Range
Stability (per year)
0.1% RO,
Noncumulative
Operating Humidity
095% Noncondensing
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
Surge Withstand
Phone: 1-800-274-5368
Fax: 585-454-7805
Approximate Dimensions
(excluding mounting plate)
Overrange with Linearity
0.25% of Span,
Noncumulative
0.2% RO,
Noncumulative
Isolation
60 Hz
0.15% of Span,
Noncumulative
Dielectric Withstand
No.
PF Effect on Accuracy
What does this mean? Arent all accuracy specifications the same?
5001000 Vars/Element
500600 Vars/Element
54
SCI Transducer Cat. 52-89(MTD)
010,000
10 Vdc
P-Option* Vars
(Var/Varhour
Transducer)
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Power Factor
0 to 1 mAdc Vars
(Var/Varhour
Transducer)
P-Option* Watts
(Watt/Watthour
Transducer)
Exceltronic
SCIENTIFIC
Specifications
COLUMBUS
Phone: 1-800-274-5368
Fax: 585-454-7805
55
54-55
1/9/02, 5:27 PM
Ordering Procedure
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
Ordering Procedure
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
ORDERING PROCEDURE
Option
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Description
Output
Auxiliary
Power
Pulse
Output
Mounting
Orientation
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
Ext. Aux.
Power
A2***
A4
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 5
Table 6
Table 7
Table 7
Table 3
(P-Option Units)
A2*** (leave blank)
0 to 1 mAdc
output
A4
A2
-6070
A4
-V
-5
Specify
counts
per hour
-1
-RS
-SM
Specify
output
voltage
3 VA
3 VA
6 VA
6 VA
-SC
Specify
input
value
If other than 120 Vac (std.), specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux., 277 Vac Aux., or 480 Vac Aux.
Option
-6070
-6270
-6096
-6296
Description
Form-C Mercury-Wetted Relay, Unidirectional
Form-C Solid-State, Unidirectional
Form-C Mercury-Wetted Relay, Bidirectional
Form-C Solid-State, Bidirectional
XLV31K521/2A2-6070-V-5-1-RS-SM-SC
21/2-element, 0 to 1 mAdc Var/Varhour Transducer; 120 Vac external auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output);
seismic brace; special calibration (example: 7200 W).
XLV31K521/2PAN7A4-6070-V-5-1-RS-SM-SC
21/2-element, 4-20 mAdc Var/Varhour Transducer; internal auxiliary power; mercury-wetted relay (unidirectional);
vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output); seismic brace;
special calibration (example: 7200 W).
Watt
Model No.
XL5C5
XL31K5
XL31K521/2
XL342K5
Var
Model No.
XLV5C5
XLV31K5
XLV31K521/2
XLV342K5
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
P-Option**
PAN6
PAN7
PAN8
PAN6-B
PAN7-B
PAN8-B
PA6
PA7
PA8
PA6-B
PA7-B
PA8-B
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
Current
Option
-3
-4
Std.
-11
-5
-7
-8
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
25 A
Option
-RS
-6
-12
-6-RS
-12-RS
Current Range
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
0-30 A
Voltage
Calibration at Rated Output
(5 A Nominal Input)
Option
100 W or Vars/Element
-0
250 W or Vars/Element
Std.
500 W or Vars/Element
-1
750 W or Vars/Element
-9
1000 W or Vars/Element
-2
1500 W or Vars/Element
2500 W or Vars/Element
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
Option -8 requires a Style V case. (See page 123 for case dimensions.
Maximum height of terminal strip(s) is 1.07" for units with -8 option.)
-Z
Description
You must specify the desired input value:
50-200% Calibration Adjustment (current outputs)
0 to 1 mAdc units can be calibrated within 90-180% of their
standard-calibration input watts or vars. (Example: A 2-element
50-200% Calibration Adjustment (voltage outputs)
watt/watthour transducer is calibrated to 1000 W standard. The
(available only with 0 to 1 mAdc units)
-SC option can be added for input levels from 900 W (90%) to 1800 W
24 Vdc Loop-Powered (PA7 and PA7-B models only)
(180%).) P-Option units can be calibrated within 60-180% of their
(consult factory for specifications)
standard-calibration input watts or vars.
Analog Output Shorting Relay
This information is not part of the model number, but must be
(available only with 0 to 1 mAdc units)
provided to the factory when you place your order.
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
If you require additional options not shown here, see Special
(consult factory if you desire this option with
Options on page 128. When ordering any special options, or
a P-Option unit)
more than three options, you must first consult the factory for
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
pricing and delivery estimates.
(available only with P-Option units, except PAN-B models)
56
SCI Transducer Cat. 52-89(MTD)
Mounting Orientation*****
-V (Vertical) or -H (Horizontal)
Not Applicable
-V (Vertical) or -H (Horizontal)
Not Applicable
***** You must specify the desired mounting orientation for units with mercury-wetted relays.
CPH Range****
2-14,000
2-900,000
2-14,000
2-900,000
Burden
Exceltronic
PAN7
Frequency Range
*** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
XLV31K521/2
P-Option
outputs
Input Range
(0 to 1 mAdc Units)
Phone: 1-800-274-5368
Fax: 585-454-7805
57
56-57
1/9/02, 5:27 PM
Ordering Procedure
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
Ordering Procedure
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
ORDERING PROCEDURE
Option
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Description
Output
Auxiliary
Power
Pulse
Output
Mounting
Orientation
Current
Input
Voltage
Input
-RS/Freq.
Option #1
Option
#2
Option
#3
Ext. Aux.
Power
A2***
A4
Table 1
Table 2
Table 3
Table 4
Table 4
Table 5
Table 5
Table 6
Table 7
Table 7
Table 3
(P-Option Units)
A2*** (leave blank)
0 to 1 mAdc
output
A4
A2
-6070
A4
-V
-5
Specify
counts
per hour
-1
-RS
-SM
Specify
output
voltage
3 VA
3 VA
6 VA
6 VA
-SC
Specify
input
value
If other than 120 Vac (std.), specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux., 277 Vac Aux., or 480 Vac Aux.
Option
-6070
-6270
-6096
-6296
Description
Form-C Mercury-Wetted Relay, Unidirectional
Form-C Solid-State, Unidirectional
Form-C Mercury-Wetted Relay, Bidirectional
Form-C Solid-State, Bidirectional
XLV31K521/2A2-6070-V-5-1-RS-SM-SC
21/2-element, 0 to 1 mAdc Var/Varhour Transducer; 120 Vac external auxiliary power; mercury-wetted relay
(unidirectional); vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output);
seismic brace; special calibration (example: 7200 W).
XLV31K521/2PAN7A4-6070-V-5-1-RS-SM-SC
21/2-element, 4-20 mAdc Var/Varhour Transducer; internal auxiliary power; mercury-wetted relay (unidirectional);
vertical mounting; 10 A input; 240 V input; resistor scaling (converts current output to voltage output); seismic brace;
special calibration (example: 7200 W).
Watt
Model No.
XL5C5
XL31K5
XL31K521/2
XL342K5
Var
Model No.
XLV5C5
XLV31K5
XLV31K521/2
XLV342K5
Connection
Single Phase
3 Phase, 3 Wire
3 Phase, 4 Wire
3 Phase, 4 Wire
P-Option**
PAN6
PAN7
PAN8
PAN6-B
PAN7-B
PAN8-B
PA6
PA7
PA8
PA6-B
PA7-B
PA8-B
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
Current
Option
-3
-4
Std.
-11
-5
-7
-8
Nominal
1A
2.5 A
5A
7.5 A
10 A
15 A
25 A
Option
-RS
-6
-12
-6-RS
-12-RS
Current Range
w/ Accuracy
0-2 A
0-5 A
0-10 A
0-15 A
0-20 A
0-20 A
0-30 A
Voltage
Calibration at Rated Output
(5 A Nominal Input)
Option
100 W or Vars/Element
-0
250 W or Vars/Element
Std.
500 W or Vars/Element
-1
750 W or Vars/Element
-9
1000 W or Vars/Element
-2
1500 W or Vars/Element
2500 W or Vars/Element
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
Nominal
69 V
120 V
240 V
277 V
480 V
Voltage Range
w/ Accuracy
0-75 V
0-150 V
0-300 V
0-340 V
0-600 V
Option -8 requires a Style V case. (See page 123 for case dimensions.
Maximum height of terminal strip(s) is 1.07" for units with -8 option.)
-Z
Description
You must specify the desired input value:
50-200% Calibration Adjustment (current outputs)
0 to 1 mAdc units can be calibrated within 90-180% of their
standard-calibration input watts or vars. (Example: A 2-element
50-200% Calibration Adjustment (voltage outputs)
watt/watthour transducer is calibrated to 1000 W standard. The
(available only with 0 to 1 mAdc units)
-SC option can be added for input levels from 900 W (90%) to 1800 W
24 Vdc Loop-Powered (PA7 and PA7-B models only)
(180%).) P-Option units can be calibrated within 60-180% of their
(consult factory for specifications)
standard-calibration input watts or vars.
Analog Output Shorting Relay
This information is not part of the model number, but must be
(available only with 0 to 1 mAdc units)
provided to the factory when you place your order.
Special Calibration
Seismic Brace (available with 0 to 1 mAdc units)
If you require additional options not shown here, see Special
(consult factory if you desire this option with
Options on page 128. When ordering any special options, or
a P-Option unit)
more than three options, you must first consult the factory for
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
pricing and delivery estimates.
(available only with P-Option units, except PAN-B models)
56
SCI Transducer Cat. 52-89(MTD)
Mounting Orientation*****
-V (Vertical) or -H (Horizontal)
Not Applicable
-V (Vertical) or -H (Horizontal)
Not Applicable
***** You must specify the desired mounting orientation for units with mercury-wetted relays.
CPH Range****
2-14,000
2-900,000
2-14,000
2-900,000
Burden
Exceltronic
PAN7
Frequency Range
*** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
XLV31K521/2
P-Option
outputs
Input Range
(0 to 1 mAdc Units)
Phone: 1-800-274-5368
Fax: 585-454-7805
57
56-57
1/9/02, 5:27 PM
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
WIRING DIAGRAMS FOR 0 to 1 mAdc UNITS (Style I Case)
DC
OUTPUT
L1
L2
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
10
11
12
LOAD
10
11
12
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
Exceltronic
L1
L2
LINE
LINE
LINE
LINE
L1
DC
OUTPUT
-6270/-6296 Models
-6070/-6096 Models
-6270/-6296 Models
-6070/-6096 Models
10
11
12
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
DC
OUTPUT
LINE
L2
L1
L3
+
3
-6070/-6096 Models
-6270/-6296 Models
DC
OUTPUT
LINE
L2
-6270/-6296 Models
LINE
L3
L1
L2
LINE
L3
L1
+
3
DC
OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
10
11
12
10
11
12
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
10
11
12
10
11
12
LOAD
Adjust
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
58
SCI Transducer Cat. 52-89(MTD)
L2
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
59
58-59
1/9/02, 5:27 PM
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
WIRING DIAGRAMS FOR 0 to 1 mAdc UNITS (Style I Case)
DC
OUTPUT
L1
L2
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
10
11
12
LOAD
10
11
12
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
Exceltronic
L1
L2
LINE
LINE
LINE
LINE
L1
DC
OUTPUT
-6270/-6296 Models
-6070/-6096 Models
-6270/-6296 Models
-6070/-6096 Models
10
11
12
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
DC
OUTPUT
LINE
L2
L1
L3
+
3
-6070/-6096 Models
-6270/-6296 Models
DC
OUTPUT
LINE
L2
-6270/-6296 Models
LINE
L3
L1
L2
LINE
L3
L1
+
3
DC
OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
10
11
12
10
11
12
LOAD
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
10
11
12
10
11
12
LOAD
Adjust
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
58
SCI Transducer Cat. 52-89(MTD)
L2
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
59
58-59
1/9/02, 5:27 PM
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
-6070/-6096 Models
DC
OUTPUT
L1
DC
OUTPUT
L1
L2
LINE
LINE
LINE
L2
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
LOAD
EXTERNAL
AUX. POWER
10
11
12
LOAD
10
11
12
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
Exceltronic
-6270/-6296 Models
-6070/-6096 Models
LINE
L1
10
11
12
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
-6070/-6096 Models
-6270/-6296 Models
L1
LINE
L2
-6070/-6096 Models
L1
L3
LINE
L2
-6270/-6296 Models
L3
LINE
L1
DC
OUTPUT
DC
OUTPUT
DC
OUTPUT
10
11
12
10
11
12
LOAD
L1
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
Adjust
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
60
SCI Transducer Cat. 52-89(MTD)
L2
DC
OUTPUT
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L3
LINE
L2
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
61
60-61
1/9/02, 5:27 PM
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
Wiring Diagrams
Exceltronic AC Watt/Watthour
or Var/Varhour Transducers
-6070/-6096 Models
DC
OUTPUT
L1
DC
OUTPUT
L1
L2
LINE
LINE
LINE
L2
DC
OUTPUT
L2
L3
L1
DC
OUTPUT
10
11
12
LOAD
EXTERNAL
AUX. POWER
10
11
12
LOAD
10
11
12
L3
L3
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L2
Exceltronic
-6270/-6296 Models
-6070/-6096 Models
LINE
L1
10
11
12
EXTERNAL
AUX. POWER
LOAD
LOAD
NOTE: For 1-element units with -8 option, connect current input to terminals 7 () & 10.
-6070/-6096 Models
-6270/-6296 Models
L1
LINE
L2
-6070/-6096 Models
L1
L3
LINE
L2
-6270/-6296 Models
L3
LINE
L1
DC
OUTPUT
DC
OUTPUT
DC
OUTPUT
10
11
12
10
11
12
LOAD
L1
10
11
12
EXTERNAL
AUX. POWER
10
11
12
LOAD
Adjust
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
60
SCI Transducer Cat. 52-89(MTD)
L2
DC
OUTPUT
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
L3
LINE
L2
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
61
60-61
1/9/02, 5:27 PM
SCIENTIFIC
Exceltronic AC Phase Angle
(Power Factor) Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC PHASE ANGLE (POWER FACTOR) TRANSDUCERS
Specifications
Current
Input
Voltage
Input
Nominal
Range
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
0.255 A
10 A
250 A
1 VA (maximum) at 5 A
Nominal
Range
Overload Continuous
Burden/Element
100130 Vac
50500 Hz
3 VA Nominal
Accuracy
Applications
Outputs
Bipolar output
Generating stations
0 to 50 mVdc
Exceptional reliability
Process control
0 to 0.5 mAdc
High accuracy
Energy-management
systems
135 mAdc
-20 C to +60 C
Compliance Voltage
Load
Output
Ripple
Peak
Type A Units
Type A1 & A4 Units
Gain
Zero
103050 mAdc
< 10 ms to 99%
< 400 ms to 99%
Operating Humidity
095% Noncondensing
1500 VRMS at 60 Hz
Surge Withstand
Maximum Net Weight
Phone: 1-800-274-5368
Fax: 585-454-7805
Approximate Dimensions
(excluding mounting plate)
ANSI/IEEE C37.90.1
2 lbs., 12 oz. (1.2 kg)
Model No./Accuracy
25 C
PF-1A, PF-1A1, PF-1A4
0.01 PF from 0.8 Lead to 0.8 Lag
0.03 PF from 0.3 Lead to 0.3 Lag
PF-2A, PF-2A1, PF-2A4
0.01 PF from 0.8 Lead to 0.8 Lag
0.025 PF from 0.5 Lead to 0.5 Lag
PF-3A, PF-3A1, PF-3A4
0.01 PF from 0.9 Lead to 0.9 Lag
0.02 PF from 0.7 Lead to 0.7 Lag
PF-34A, PF-34A1, PF-34A4
0.01 PF from 0.8 Lead to 0.8 Lag
0.025 PF from 0.5 Lead to 0.5 Lag
62
SCI Transducer Cat. 52-89(MTD)
Complete (Input/Output/Power/Case)
Complete (Input/Output/Case)
Dielectric Withstand
41220 mAdc
-20 C to +50 C
Power Factor
PF-34 Models
120 V/220 V
95135 V/190250 V
150 V/275 V
5.5 VA (maximum) at 120 V
None Required
Features
P-Option*
(Phase Angle (Power Factor) Transducer)
Exceltronic
All models have bipolar output; therefore indicating not only the phase
angle but also whether it is lead or lag. The transducers provide a
meaningful indication of phase angle on a three-phase system, only when
balanced load conditions prevail. While all models may be used on
three-phase, four-wire systems, only the PF-34 models can be used on three-phase,
three-wire systems. The PF-34 models are recommended if varying line frequency is present.
Phone: 1-800-274-5368
Fax: 585-454-7805
63
62-63
1/9/02, 5:28 PM
SCIENTIFIC
Exceltronic AC Phase Angle
(Power Factor) Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC PHASE ANGLE (POWER FACTOR) TRANSDUCERS
Specifications
Current
Input
Voltage
Input
Nominal
Range
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
0.255 A
10 A
250 A
1 VA (maximum) at 5 A
Nominal
Range
Overload Continuous
Burden/Element
100130 Vac
50500 Hz
3 VA Nominal
Accuracy
Applications
Outputs
Bipolar output
Generating stations
0 to 50 mVdc
Exceptional reliability
Process control
0 to 0.5 mAdc
High accuracy
Energy-management
systems
135 mAdc
-20 C to +60 C
Compliance Voltage
Load
Output
Ripple
Peak
Type A Units
Type A1 & A4 Units
Gain
Zero
103050 mAdc
< 10 ms to 99%
< 400 ms to 99%
Operating Humidity
095% Noncondensing
1500 VRMS at 60 Hz
Surge Withstand
Maximum Net Weight
Phone: 1-800-274-5368
Fax: 585-454-7805
Approximate Dimensions
(excluding mounting plate)
ANSI/IEEE C37.90.1
2 lbs., 12 oz. (1.2 kg)
Model No./Accuracy
25 C
PF-1A, PF-1A1, PF-1A4
0.01 PF from 0.8 Lead to 0.8 Lag
0.03 PF from 0.3 Lead to 0.3 Lag
PF-2A, PF-2A1, PF-2A4
0.01 PF from 0.8 Lead to 0.8 Lag
0.025 PF from 0.5 Lead to 0.5 Lag
PF-3A, PF-3A1, PF-3A4
0.01 PF from 0.9 Lead to 0.9 Lag
0.02 PF from 0.7 Lead to 0.7 Lag
PF-34A, PF-34A1, PF-34A4
0.01 PF from 0.8 Lead to 0.8 Lag
0.025 PF from 0.5 Lead to 0.5 Lag
62
SCI Transducer Cat. 52-89(MTD)
Complete (Input/Output/Power/Case)
Complete (Input/Output/Case)
Dielectric Withstand
41220 mAdc
-20 C to +50 C
Power Factor
PF-34 Models
120 V/220 V
95135 V/190250 V
150 V/275 V
5.5 VA (maximum) at 120 V
None Required
Features
P-Option*
(Phase Angle (Power Factor) Transducer)
Exceltronic
All models have bipolar output; therefore indicating not only the phase
angle but also whether it is lead or lag. The transducers provide a
meaningful indication of phase angle on a three-phase system, only when
balanced load conditions prevail. While all models may be used on
three-phase, four-wire systems, only the PF-34 models can be used on three-phase,
three-wire systems. The PF-34 models are recommended if varying line frequency is present.
Phone: 1-800-274-5368
Fax: 585-454-7805
63
62-63
1/9/02, 5:28 PM
Ordering Procedure
Exceltronic AC Phase Angle
(Power Factor) Transducers
Ordering Procedure
Exceltronic AC Phase Angle
(Power Factor) Transducers
ORDERING PROCEDURE
P-Option
PAN6-B
PAN7-B
PAN8-B
Output Range
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
PA6-B
PA7-B
PA8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
-RS/Freq.
Option #1
Table 1
Table 2
Table 3
0 to 50 mVdc or
0 to 0.5 mAdc
outputs
Option
#2
Option
#3
Table 4
Table 4
External
Aux. Power
PF-34A4
-RS
PF-34
PA7-B
-SM
Specify
output
voltage
-24
If other than 120 Vac (std.), specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux., 227 Vac Aux., or 480 Vac Aux.
EXAMPLES:
PF-34A4-RS-SM
3-phase, 0 to 0.5 mAdc Phase Angle (PF) Transducer; resistor scaling (converts current output to voltage output);
seismic brace.
PF-34PA7-B-RS-SM-24
3-phase, 4-12-20 mAdc Phase Angle (PF) Transducer; resistor scaling (converts current output to voltage output);
seismic brace; 24 Vdc loop-powered.
Output (Linear
to Phase Angle)
Output Load
Required
Phase Angle
Range
PF-1A
PF-1A1
PF-1A4
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 72.5 o
0 to 72.5 o
0 to 72.5 o
PF-2A
PF-2A1
PF-2A4
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 60 o
0 to 60 o
0 to 60 o
PF-3A
PF-3A1
PF-3A4
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 45.5 o
0 to 45.5 o
0 to 45.5 o
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 60 o
0 to 60 o
0 to 60 o
See Table 2
See Table 2
See Table 2
See Table 2
See Table 2
See Table 2
0 to 72.5 o
0 to 60 o
0 to 45.5 o
See Table 2
See Table 2
0 to 60 o
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
Option
-RS*
-6
-12
-6-RS*
-12-RS*
Exceltronic
P-Option
outputs
-SM
Description
24 Vdc Loop-Powered (PA7-B models only)
(consult factory for specifications)
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
PF-34A
PF-34A1
PF-34A4
(P-Option Units)
Single Phase or 3 Phase, 4 Wire
PF-1
PF-2
PF-3
3 Phase, 3 Wire or 4 Wire
PF-34
Phone: 1-800-274-5368
Fax: 585-454-7805
64
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
65
64-65
1/9/02, 5:28 PM
Ordering Procedure
Exceltronic AC Phase Angle
(Power Factor) Transducers
Ordering Procedure
Exceltronic AC Phase Angle
(Power Factor) Transducers
ORDERING PROCEDURE
P-Option
PAN6-B
PAN7-B
PAN8-B
Output Range
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
PA6-B
PA7-B
PA8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
-RS/Freq.
Option #1
Table 1
Table 2
Table 3
0 to 50 mVdc or
0 to 0.5 mAdc
outputs
Option
#2
Option
#3
Table 4
Table 4
External
Aux. Power
PF-34A4
-RS
PF-34
PA7-B
-SM
Specify
output
voltage
-24
If other than 120 Vac (std.), specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux., 227 Vac Aux., or 480 Vac Aux.
EXAMPLES:
PF-34A4-RS-SM
3-phase, 0 to 0.5 mAdc Phase Angle (PF) Transducer; resistor scaling (converts current output to voltage output);
seismic brace.
PF-34PA7-B-RS-SM-24
3-phase, 4-12-20 mAdc Phase Angle (PF) Transducer; resistor scaling (converts current output to voltage output);
seismic brace; 24 Vdc loop-powered.
Output (Linear
to Phase Angle)
Output Load
Required
Phase Angle
Range
PF-1A
PF-1A1
PF-1A4
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 72.5 o
0 to 72.5 o
0 to 72.5 o
PF-2A
PF-2A1
PF-2A4
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 60 o
0 to 60 o
0 to 60 o
PF-3A
PF-3A1
PF-3A4
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 45.5 o
0 to 45.5 o
0 to 45.5 o
0 to 50 mVdc
0 to 50 mVdc
0 to 0.5 mAdc
100
50,000
0-10,000
0 to 60 o
0 to 60 o
0 to 60 o
See Table 2
See Table 2
See Table 2
See Table 2
See Table 2
See Table 2
0 to 72.5 o
0 to 60 o
0 to 45.5 o
See Table 2
See Table 2
0 to 60 o
Description
Scaling Resistor
400 Hz
50 Hz
400 Hz and Scaling Resistor
50 Hz and Scaling Resistor
Option
-RS*
-6
-12
-6-RS*
-12-RS*
Exceltronic
P-Option
outputs
-SM
Description
24 Vdc Loop-Powered (PA7-B models only)
(consult factory for specifications)
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
PF-34A
PF-34A1
PF-34A4
(P-Option Units)
Single Phase or 3 Phase, 4 Wire
PF-1
PF-2
PF-3
3 Phase, 3 Wire or 4 Wire
PF-34
Phone: 1-800-274-5368
Fax: 585-454-7805
64
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
65
64-65
1/9/02, 5:28 PM
Wiring Diagrams
Exceltronic AC Phase Angle
(Power Factor) Transducers
Conversion Table
Exceltronic AC Phase Angle
(Power Factor) Transducers
WIRING DIAGRAMS FOR 0 to 50 mVdc AND 0 to 0.5 mAdc UNITS (Style II Case)
AND P-OPTION UNITS (Style I Case)
Angle in
Decimals
1.000
.995
.990
.985
.980
.975
.970
.965
.960
.955
.950
.940
.930
.920
.910
.900
.890
.880
.870
.860
.850
.840
.830
.820
.810
.800
.790
.780
.770
.760
.750
.740
.730
.720
.710
.700
.680
.660
.640
.620
.600
.580
.560
.540
.520
.500
.480
.460
.440
.420
.400
.380
.360
.340
.320
.300
00'
544'
86.6'
956'
1129'
1250'
144.2'
1512'
1616'
1715'
1812'
1957'
2134'
234.4'
2430'
2550.5'
278'
2821.5'
2932.5'
3041'
3147'
3252'
3354'
3455'
3554'
3652'
3749'
3844'
3939'
4032'
4125'
4216'
437'
4357'
4446'
4534'
479'
4842'
5012.5'
5141'
538'
5433'
5557'
5719'
5840'
600'
6119'
6237'
6354'
6510'
6625'
6740'
6854'
707.4'
7120.2'
7232.5'
0.00
5.73
8.11
9.94
11.48
12.84
14.07
15.20
16.26
17.25
18.19
19.95
21.57
23.07
24.49
25.84
27.13
28.36
29.54
30.68
31.79
32.86
33.90
34.92
35.90
36.87
37.81
38.74
39.65
40.54
41.41
42.27
43.11
43.95
44.77
45.57
47.16
48.70
50.21
51.68
53.13
54.55
55.94
57.32
58.67
60.00
61.31
62.61
63.90
65.17
66.42
67.67
68.90
70.12
71.34
72.54
(45.57)
FS = 0.7 PF
0.00
12.58
17.80
21.80
25.19
28.17
30.87
33.36
35.70
37.86
39.92
43.77
47.32
50.63
53.75
56.70
59.52
62.22
64.82
67.32
69.75
72.10
74.39
76.61
78.78
80.90
82.98
85.01
86.99
88.95
90.86
92.75
94.60
96.43
98.23
100.00
(60)
FS = 0.5 PF
0.00
9.56
13.52
16.56
19.13
21.40
23.45
25.34
27.10
28.76
30.32
33.25
35.94
38.46
40.82
43.07
45.21
47.26
49.24
51.14
52.98
54.77
56.50
58.19
59.84
61.45
63.02
64.57
66.08
67.56
69.02
70.45
71.86
73.24
74.61
75.95
78.59
81.17
83.68
86.14
88.55
90.92
93.24
95.53
97.78
100.00
Phone: 1-800-274-5368
(72.54)
FS = 0.3 PF
0.00
7.90
11.18
13.70
15.82
17.70
19.40
20.96
22.41
23.78
25.08
27.50
29.73
31.81
33.77
35.62
37.39
39.09
40.72
42.30
43.82
45.30
46.73
48.13
49.49
50.83
52.13
53.40
54.05
55.88
57.08
58.27
59.43
60.58
61.71
62.82
65.01
67.13
69.21
71.25
73.24
75.20
77.12
79.01
80.87
82.71
84.52
86.31
88.08
89.83
91.56
93.28
94.98
96.67
98.34
100.00
Fax: 585-454-7805
L1
+
1
LINE
L2
L3
DC
OUTPUT
DC
OUTPUT
+
1
LOAD
LOAD
DC
OUTPUT
LINE
L1
L2
L1
DC
OUTPUT
10
11
12
10
11
12
EXTERNAL
AUX. POWER
LOAD
DC
OUTPUT
L1
LINE
L2
L3
DC
OUTPUT
10
11
L1
LINE
L2
L3
220V
120V
JUMPER JUMPER
7
EXTERNAL
AUX. POWER
LOAD
LINE
L2
L3
220V
120V
JUMPER
JUMPER
12
7
10
11
12
LOAD
LOAD
Adjust
NOTE: Connections for 3 Phase, 3 Wire PF-34 Models are the same, except there is no "N" line.
66
SCI Transducer Cat. 52-89(MTD)
LINE
L1
L2
Exceltronic
Power
Factor
Phone: 1-800-274-5368
Fax: 585-454-7805
67
66-67
1/9/02, 5:28 PM
Wiring Diagrams
Exceltronic AC Phase Angle
(Power Factor) Transducers
Conversion Table
Exceltronic AC Phase Angle
(Power Factor) Transducers
WIRING DIAGRAMS FOR 0 to 50 mVdc AND 0 to 0.5 mAdc UNITS (Style II Case)
AND P-OPTION UNITS (Style I Case)
Angle in
Decimals
1.000
.995
.990
.985
.980
.975
.970
.965
.960
.955
.950
.940
.930
.920
.910
.900
.890
.880
.870
.860
.850
.840
.830
.820
.810
.800
.790
.780
.770
.760
.750
.740
.730
.720
.710
.700
.680
.660
.640
.620
.600
.580
.560
.540
.520
.500
.480
.460
.440
.420
.400
.380
.360
.340
.320
.300
00'
544'
86.6'
956'
1129'
1250'
144.2'
1512'
1616'
1715'
1812'
1957'
2134'
234.4'
2430'
2550.5'
278'
2821.5'
2932.5'
3041'
3147'
3252'
3354'
3455'
3554'
3652'
3749'
3844'
3939'
4032'
4125'
4216'
437'
4357'
4446'
4534'
479'
4842'
5012.5'
5141'
538'
5433'
5557'
5719'
5840'
600'
6119'
6237'
6354'
6510'
6625'
6740'
6854'
707.4'
7120.2'
7232.5'
0.00
5.73
8.11
9.94
11.48
12.84
14.07
15.20
16.26
17.25
18.19
19.95
21.57
23.07
24.49
25.84
27.13
28.36
29.54
30.68
31.79
32.86
33.90
34.92
35.90
36.87
37.81
38.74
39.65
40.54
41.41
42.27
43.11
43.95
44.77
45.57
47.16
48.70
50.21
51.68
53.13
54.55
55.94
57.32
58.67
60.00
61.31
62.61
63.90
65.17
66.42
67.67
68.90
70.12
71.34
72.54
(45.57)
FS = 0.7 PF
0.00
12.58
17.80
21.80
25.19
28.17
30.87
33.36
35.70
37.86
39.92
43.77
47.32
50.63
53.75
56.70
59.52
62.22
64.82
67.32
69.75
72.10
74.39
76.61
78.78
80.90
82.98
85.01
86.99
88.95
90.86
92.75
94.60
96.43
98.23
100.00
(60)
FS = 0.5 PF
0.00
9.56
13.52
16.56
19.13
21.40
23.45
25.34
27.10
28.76
30.32
33.25
35.94
38.46
40.82
43.07
45.21
47.26
49.24
51.14
52.98
54.77
56.50
58.19
59.84
61.45
63.02
64.57
66.08
67.56
69.02
70.45
71.86
73.24
74.61
75.95
78.59
81.17
83.68
86.14
88.55
90.92
93.24
95.53
97.78
100.00
Phone: 1-800-274-5368
(72.54)
FS = 0.3 PF
0.00
7.90
11.18
13.70
15.82
17.70
19.40
20.96
22.41
23.78
25.08
27.50
29.73
31.81
33.77
35.62
37.39
39.09
40.72
42.30
43.82
45.30
46.73
48.13
49.49
50.83
52.13
53.40
54.05
55.88
57.08
58.27
59.43
60.58
61.71
62.82
65.01
67.13
69.21
71.25
73.24
75.20
77.12
79.01
80.87
82.71
84.52
86.31
88.08
89.83
91.56
93.28
94.98
96.67
98.34
100.00
Fax: 585-454-7805
L1
+
1
LINE
L2
L3
DC
OUTPUT
DC
OUTPUT
+
1
LOAD
LOAD
DC
OUTPUT
LINE
L1
L2
L1
DC
OUTPUT
10
11
12
10
11
12
EXTERNAL
AUX. POWER
LOAD
DC
OUTPUT
L1
LINE
L2
L3
DC
OUTPUT
10
11
L1
LINE
L2
L3
220V
120V
JUMPER JUMPER
7
EXTERNAL
AUX. POWER
LOAD
LINE
L2
L3
220V
120V
JUMPER
JUMPER
12
7
10
11
12
LOAD
LOAD
Adjust
NOTE: Connections for 3 Phase, 3 Wire PF-34 Models are the same, except there is no "N" line.
66
SCI Transducer Cat. 52-89(MTD)
LINE
L1
L2
Exceltronic
Power
Factor
Phone: 1-800-274-5368
Fax: 585-454-7805
67
66-67
1/9/02, 5:28 PM
SCIENTIFIC
Exceltronic AC Phase Angle
or Voltage Angle Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC AC PHASE ANGLE OR VOLTAGE ANGLE TRANSDUCERS
Specifications
Current
Input
Nominal
Range
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range
Overload Continuous
Burden/Element
Second
Voltage
Input
Nominal
Range
Overload Continuous
Burden/Element
0 to 1 mAdc
(Phase Angle
Transducer)
5A
0.55 A
10 A
250 A
0.2 VA (maximum) at 5 A
N/A
120 V
50135 V
150 V
2.2 VA (maximum) at 120 V
N/A
None Required
100130 Vac
50500 Hz
3 VA Nominal
Applications
SCADA
Outputs
0 to 1 mAdc
1 mAdc for
Standard Calibration
1 at 25 C
0.5 over
Temperature Range
0.6 over
Temperature Range
0.5 over
Temperature Range
0.6 over
Temperature Range
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Substation monitoring
135 mAdc
Generating stations
41220 mAdc
103050 mAdc
Response Time
10 Vdc
010,000
Load
Standard Calibration
Adjustments
Gain
Zero
10 Vdc
010,000
< 1% RO
< 0.5% RO
< 1% RO
< 0.5% RO
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
Nominal 3%
1% RO,
Noncumulative
1% of Span,
Noncumulative
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Operating Humidity
1% RO,
Noncumulative
Isolation
Dielectric Withstand
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
(excluding mounting plate)
1% of Span,
Noncumulative
095% Noncondensing
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
Frequency
100130 Vac
50500 Hz
3 VA Nominal
None Required
Accuracy
Features
P-Option*
(Voltage Angle
Transducer)
120 V
95135 V
150 V
4 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
0 to 1 mAdc
(Voltage Angle
Transducer)
P-Option*
(Phase Angle
Transducer)
Exceltronic
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Phone: 1-800-274-5368
Fax: 585-454-7805
68
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
69
68-69
1/9/02, 5:28 PM
SCIENTIFIC
Exceltronic AC Phase Angle
or Voltage Angle Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC AC PHASE ANGLE OR VOLTAGE ANGLE TRANSDUCERS
Specifications
Current
Input
Nominal
Range
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range
Overload Continuous
Burden/Element
Second
Voltage
Input
Nominal
Range
Overload Continuous
Burden/Element
0 to 1 mAdc
(Phase Angle
Transducer)
5A
0.55 A
10 A
250 A
0.2 VA (maximum) at 5 A
N/A
120 V
50135 V
150 V
2.2 VA (maximum) at 120 V
N/A
None Required
100130 Vac
50500 Hz
3 VA Nominal
Applications
SCADA
Outputs
0 to 1 mAdc
1 mAdc for
Standard Calibration
1 at 25 C
0.5 over
Temperature Range
0.6 over
Temperature Range
0.5 over
Temperature Range
0.6 over
Temperature Range
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Substation monitoring
135 mAdc
Generating stations
41220 mAdc
103050 mAdc
Response Time
10 Vdc
010,000
Load
Standard Calibration
Adjustments
Gain
Zero
10 Vdc
010,000
< 1% RO
< 0.5% RO
< 1% RO
< 0.5% RO
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
Nominal 3%
1% RO,
Noncumulative
1% of Span,
Noncumulative
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Operating Humidity
1% RO,
Noncumulative
Isolation
Dielectric Withstand
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
(excluding mounting plate)
1% of Span,
Noncumulative
095% Noncondensing
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
Frequency
100130 Vac
50500 Hz
3 VA Nominal
None Required
Accuracy
Features
P-Option*
(Voltage Angle
Transducer)
120 V
95135 V
150 V
4 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
0 to 1 mAdc
(Voltage Angle
Transducer)
P-Option*
(Phase Angle
Transducer)
Exceltronic
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Phone: 1-800-274-5368
Fax: 585-454-7805
68
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
69
68-69
1/9/02, 5:28 PM
Ordering Procedure
Exceltronic AC Phase Angle
or Voltage Angle Transducers
Wiring Diagrams
Exceltronic AC Phase Angle
or Voltage Angle Transducers
WIRING DIAGRAMS FOR 0 to 1 mAdc UNITS (Style II Case) AND P-OPTION UNITS (Style I Case)
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Base Model No.
Output
Angle Range
Designator
Table 1
Table 2
Table 1
0 to 1 mAdc
output
6330
EXAMPLES:
External
Aux. Power
0 to 1 mAdc Units
60
6330
PA7-B
LINE
L1
L2
LINE
L1
L2
180
Consult
factory
for
options
DC
OUTPUT
DC
OUTPUT
LINE
L1
L2
Exceltronic
P-Option
outputs
Options
6330-60
0 to 1 mAdc Phase Angle Transducer, 0 to 60 input range.
LOAD
LOAD
LOAD
SYSTEM A
SYSTEM B
LINE
L1
L2
LINE
L1
L2
6330PA7-B-180
4-12-20 mAdc Phase Angle Transducer, 0 to 180 input range.
P-Option Units
Table 1 Base Model Number Selection
Model 6330 Phase Angle
Phase Angle
Model No.
6330
VoltageAngle
Model No.
6314
Angle Range
Designator
45
60
75
180
Power Factor
1 to 0.7071
1 to 0.5
1 to 0.2588
1 to -1 and -1 to 1
Standard Calibration
Input
Output
0 to 45
0 to 1mAdc
0 to 60
0 to 1mAdc
0 to 75
0 to 1mAdc
0 to 180
0 to 1mAdc
DC
OUTPUT
DC
OUTPUT
10
11
12
10
11
12
P-Option
PAN6-B
PAN7-B
PAN8-B
Output Range
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
PA6-B
PA7-B
PA8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Please consult the factory if you require any options with Phase Angle or Voltage Angle Transducers.
Phone: 1-800-274-5368
Fax: 585-454-7805
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
LOAD
SYSTEM A
SYSTEM B
Adjust
AMETEK Power Instruments
70
SCI Transducer Cat. 52-89(MTD)
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
71
70-71
1/9/02, 5:28 PM
Ordering Procedure
Exceltronic AC Phase Angle
or Voltage Angle Transducers
Wiring Diagrams
Exceltronic AC Phase Angle
or Voltage Angle Transducers
WIRING DIAGRAMS FOR 0 to 1 mAdc UNITS (Style II Case) AND P-OPTION UNITS (Style I Case)
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Base Model No.
Output
Angle Range
Designator
Table 1
Table 2
Table 1
0 to 1 mAdc
output
6330
EXAMPLES:
External
Aux. Power
0 to 1 mAdc Units
60
6330
PA7-B
LINE
L1
L2
LINE
L1
L2
180
Consult
factory
for
options
DC
OUTPUT
DC
OUTPUT
LINE
L1
L2
Exceltronic
P-Option
outputs
Options
6330-60
0 to 1 mAdc Phase Angle Transducer, 0 to 60 input range.
LOAD
LOAD
LOAD
SYSTEM A
SYSTEM B
LINE
L1
L2
LINE
L1
L2
6330PA7-B-180
4-12-20 mAdc Phase Angle Transducer, 0 to 180 input range.
P-Option Units
Table 1 Base Model Number Selection
Model 6330 Phase Angle
Phase Angle
Model No.
6330
VoltageAngle
Model No.
6314
Angle Range
Designator
45
60
75
180
Power Factor
1 to 0.7071
1 to 0.5
1 to 0.2588
1 to -1 and -1 to 1
Standard Calibration
Input
Output
0 to 45
0 to 1mAdc
0 to 60
0 to 1mAdc
0 to 75
0 to 1mAdc
0 to 180
0 to 1mAdc
DC
OUTPUT
DC
OUTPUT
10
11
12
10
11
12
P-Option
PAN6-B
PAN7-B
PAN8-B
Output Range
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
PA6-B
PA7-B
PA8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Please consult the factory if you require any options with Phase Angle or Voltage Angle Transducers.
Phone: 1-800-274-5368
Fax: 585-454-7805
EXTERNAL
AUX. POWER
EXTERNAL
AUX. POWER
LOAD
LOAD
SYSTEM A
SYSTEM B
Adjust
AMETEK Power Instruments
70
SCI Transducer Cat. 52-89(MTD)
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
71
70-71
1/9/02, 5:28 PM
SCIENTIFIC
Exceltronic AC Frequency Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC AC FREQUENCY TRANSDUCERS
01 mAdc
(Frequency Transducer)
Specifications
Voltage
Input
120 V
90150 V
150 V
2 VA (maximum) at 120 V
Nominal
Range
Overload Continuous
Burden/Element
0.0025% / C
0.01% / C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
Applications
Outputs
Response Time
Standard Calibration
Adjustments
Process control
01 mAdc
Generating stations
15 mAdc
Operating Humidity
Substation monitoring
Gain
Zero
< 1% RO
5% of Span (minimum)
10% of Span (minimum)
Isolation
420 mAdc
Complete (Input/Output/Case)
Dielectric Withstand
1050 mAdc
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Variety of calibration
available
010,000
Load
Features
100130 Vac
50500 Hz
3 VA Nominal
None Required
Exceltronic
P-Option*
(Frequency Transducer)
Approximate Dimensions
(excluding mounting plate)
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
One or two frequency transducers in one module
Two, four, or eight modules in one enclosure
Easy to install, expand, or repair
Convenient front-panel access for calibration and outputcurrent jacks available
See pages 7794 for more information.
Phone: 1-800-274-5368
Fax: 585-454-7805
72
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
73
72-73
1/9/02, 5:28 PM
SCIENTIFIC
Exceltronic AC Frequency Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC AC FREQUENCY TRANSDUCERS
01 mAdc
(Frequency Transducer)
Specifications
Voltage
Input
120 V
90150 V
150 V
2 VA (maximum) at 120 V
Nominal
Range
Overload Continuous
Burden/Element
0.0025% / C
0.01% / C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
Applications
Outputs
Response Time
Standard Calibration
Adjustments
Process control
01 mAdc
Generating stations
15 mAdc
Operating Humidity
Substation monitoring
Gain
Zero
< 1% RO
5% of Span (minimum)
10% of Span (minimum)
Isolation
420 mAdc
Complete (Input/Output/Case)
Dielectric Withstand
1050 mAdc
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Variety of calibration
available
010,000
Load
Features
100130 Vac
50500 Hz
3 VA Nominal
None Required
Exceltronic
P-Option*
(Frequency Transducer)
Approximate Dimensions
(excluding mounting plate)
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
One or two frequency transducers in one module
Two, four, or eight modules in one enclosure
Easy to install, expand, or repair
Convenient front-panel access for calibration and outputcurrent jacks available
See pages 7794 for more information.
Phone: 1-800-274-5368
Fax: 585-454-7805
72
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
73
72-73
1/9/02, 5:28 PM
Ordering Procedure
Exceltronic AC Frequency
Transducers
Ordering Procedure
Exceltronic AC Frequency Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
0-1 mAdc
output
Output
Table 1
6281B
Table 2
Table 3
6281
PAN7
A4
EXAMPLES:
Scaling
Resistor
Option #1
Option
#2
Option
#3
External
Auxiliary
Power
Table 4
Table 5
Table 5
Table 3
-RS
-SM
Specify
voltage
range
(P-Option Units)
A2** (leave blank)
A4
-Z
If other than 120 Vac (std.),
specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux.,
277 Vac Aux., or 480 Vac Aux.
Option
-RS***
Description
Scaling Resistor
-Z
Input Range
* All 0-1 mAdc output units are calibrated for 0.5 mAdc output at center frequency.
Description
24 Vdc Loop-Powered (PA7 models only)
(consult factory for specifications)
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units)
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Style II Case) AND P-OPTION UNITS (Style I Case)
(P-Option Units)
6281
6283
6284
45-55 Hz
375-425 Hz
55-65 Hz
Frequency
0-1 mAdc Units
Frequency
P-Option Units
3 VA
3 VA
-SM
45-55 Hz
375-425 Hz
55-65 Hz
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
6281B
6283B
6284B
Burden
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
6281PAN7A4-RS-SM-Z
45-55 Hz, 4-20 mAdc Frequency Transducer; internal auxiliary power; resistor scaling; seismic brace; zero-based output
calibration (-Z option converts 4-20 mAdc output to 0-20 mAdc output and -RS option converts current output to voltage
output).
Model No.
Frequency Range
None Required
6281B-RS-SM
45-55 Hz, 0-1 mAdc Frequency Transducer; resistor scaling (converts current output to voltage output); seismic brace.
Input Range
Exceltronic
P-Option
outputs
Auxiliary
Power
Description
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
AC
DC
INPUT
OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
1
3
AC
INPUT
Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Fax: 585-454-7805
74
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
75
74-75
1/9/02, 5:29 PM
Ordering Procedure
Exceltronic AC Frequency
Transducers
Ordering Procedure
Exceltronic AC Frequency Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
0-1 mAdc
output
Output
Table 1
6281B
Table 2
Table 3
6281
PAN7
A4
EXAMPLES:
Scaling
Resistor
Option #1
Option
#2
Option
#3
External
Auxiliary
Power
Table 4
Table 5
Table 5
Table 3
-RS
-SM
Specify
voltage
range
(P-Option Units)
A2** (leave blank)
A4
-Z
If other than 120 Vac (std.),
specify ext. aux. power voltage:
69 Vac Aux., 240 Vac Aux.,
277 Vac Aux., or 480 Vac Aux.
Option
-RS***
Description
Scaling Resistor
-Z
Input Range
* All 0-1 mAdc output units are calibrated for 0.5 mAdc output at center frequency.
Description
24 Vdc Loop-Powered (PA7 models only)
(consult factory for specifications)
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units)
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Style II Case) AND P-OPTION UNITS (Style I Case)
(P-Option Units)
6281
6283
6284
45-55 Hz
375-425 Hz
55-65 Hz
Frequency
0-1 mAdc Units
Frequency
P-Option Units
3 VA
3 VA
-SM
45-55 Hz
375-425 Hz
55-65 Hz
100-130 Vac
50-500 Hz
84-108% of Nominal Aux. Power Voltage Equals Input Frequency
6281B
6283B
6284B
Burden
** For external auxiliary power voltages other than 120 Vac, specify the voltage in the last position of the complete model number. (Example: 240 Vac Aux.)
6281PAN7A4-RS-SM-Z
45-55 Hz, 4-20 mAdc Frequency Transducer; internal auxiliary power; resistor scaling; seismic brace; zero-based output
calibration (-Z option converts 4-20 mAdc output to 0-20 mAdc output and -RS option converts current output to voltage
output).
Model No.
Frequency Range
None Required
6281B-RS-SM
45-55 Hz, 0-1 mAdc Frequency Transducer; resistor scaling (converts current output to voltage output); seismic brace.
Input Range
Exceltronic
P-Option
outputs
Auxiliary
Power
Description
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
AC
DC
INPUT
OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
1
3
AC
INPUT
Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Fax: 585-454-7805
74
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
75
74-75
1/9/02, 5:29 PM
SCIENTIFIC
Exceltronic Temperature Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC TEMPERATURE TRANSDUCERS
Specifications
01 mAdc
(Temperature Transducer)
P-Option*
(Temperature Transducer)
90130 Vac
50500 Hz
3.5 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
0.015% / F
0.02% / F
Compliance Voltage
10 Vdc
< 1% RO
Response Time
Standard Calibration
Adjustments
Applications
Features
Compatible with nickel-iron,
platinum, & copper RTDs
Exceptional reliability
Outputs
< 50 ms to 99%
Operating Humidity
Isolation
01 mAdc
Substation monitoring
15 mAdc
Surge Withstand
420 mAdc
Gain
Zero
Process control
Generating stations
16 Vdc
010,000
Load
Dielectric Withstand
Approximate
Dimensions
(excluding
mounting plate)
1050 mAdc
Exceltronic
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
2 lbs., 1 oz. (0.9 kg)
3.3" W x 2.1" D x 4.1" H
(84 mm x 53 mm x 104 mm)
Style III Case, see page 122
Model
9015N
Models
9016P &
9019C
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
One or two temperature transducers in one module
Two, four, or eight modules in one enclosure
Easy to install, expand, or repair
Convenient front-panel access for calibration and outputcurrent jacks available
See pages 7794 for more information.
Phone: 1-800-274-5368
Fax: 585-454-7805
76
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
77
76-77
1/9/02, 5:29 PM
SCIENTIFIC
Exceltronic Temperature Transducers
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
EXCELTRONIC TEMPERATURE TRANSDUCERS
Specifications
01 mAdc
(Temperature Transducer)
P-Option*
(Temperature Transducer)
90130 Vac
50500 Hz
3.5 VA Nominal
100130 Vac
50500 Hz
6 VA Nominal
0.015% / F
0.02% / F
Compliance Voltage
10 Vdc
< 1% RO
Response Time
Standard Calibration
Adjustments
Applications
Features
Compatible with nickel-iron,
platinum, & copper RTDs
Exceptional reliability
Outputs
< 50 ms to 99%
Operating Humidity
Isolation
01 mAdc
Substation monitoring
15 mAdc
Surge Withstand
420 mAdc
Gain
Zero
Process control
Generating stations
16 Vdc
010,000
Load
Dielectric Withstand
Approximate
Dimensions
(excluding
mounting plate)
1050 mAdc
Exceltronic
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
2 lbs., 1 oz. (0.9 kg)
3.3" W x 2.1" D x 4.1" H
(84 mm x 53 mm x 104 mm)
Style III Case, see page 122
Model
9015N
Models
9016P &
9019C
Also available in XLP modular, plug-in format for limitedspace applications requiring large numbers of transducers.
One or two temperature transducers in one module
Two, four, or eight modules in one enclosure
Easy to install, expand, or repair
Convenient front-panel access for calibration and outputcurrent jacks available
See pages 7794 for more information.
Phone: 1-800-274-5368
Fax: 585-454-7805
76
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
77
76-77
1/9/02, 5:29 PM
Ordering Procedure
Exceltronic Temperature Transducers
Ordering Procedure
Exceltronic Temperature Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
-RS
Output
Scaling
Resistor
Option #1
Table 1
Table 2
Table 3
Option
#2
Option
#3
Table 4
Table 4
External
Auxiliary
Power
PAN7
Option
-24
-SM
Specify
output
voltage
-Z
-SM
-Z
Description
24 Vdc Loop-Powered (PA7 models only)
(consult factory for specifications)
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units)
9019C-RS-SM
0-1 mAdc Temperature Transducer for use with copper RTD, resistor scaling (converts current output to voltage output),
seismic brace.
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Styles III & II Cases) AND P-OPTION UNITS (Style I Case)
9019CPAN7-RS-SM-Z
4-20 mAdc Temperature Transducer for use with copper RTD, resistor scaling, seismic brace, zero-based output calibration
(-Z option converts 4-20 mAdc output to 0-20 mAdc output and -RS option converts current output to voltage output).
9015N Temperature
0-1 mAdc Units
(Style III Case)
For Use w/
RTD Type
Nickel-Iron
Platinum
Copper
RTD
Resistance
676 at 77 F
100 at 32 F
10 at 77 F
EXTERNAL
AUX. POWER
DC
OUTPUT
EXTERNAL
AUX. POWER
DC
OUTPUT
Temperature
Range*
-200 F to +500 F
-320 F to +1000 F
-100 F to +300 F
Temperature
Span*
50 F thru 150 F
150 F thru 300 F
150 F thru 300 F
Measurement
Accuracy
0.4 F or 1 F
0.8 F or 1.5 F
1 F or 2 F
Maximum
RTD Current
<3 mAdc
<5 mAdc
<50 mAdc
* You must specify minimum and maximum input temperature values from within the Temperature Range shown for each RTD type.
The resulting temperature span (maximum temperature value minus minimum temperature value) must fall within the Temperature
Span shown for each RTD type. (Example: Model 9015N temperature range = -195 F to -110 F and temperature span = 85 F.)
Exceltronic
9019C
EXAMPLES:
0-1 mAdc
output
P-Option
outputs
Description
Scaling Resistor***
RTD
RTD
This information is not part of the model number, but must be provided to the factory when you place your order.
** You must specify the Temperature Coefficient of Resistance (TCR) of your 100 platinum RTD probewhether it is designed to the
American Standard (TCR = .00392 //C), U.S. Industrial Standard (TCR = .00391 //C), or European Standard (TCR = .00385 //C).
This information is not part of the model number, but must be provided to the factory when you place your order.
9015N Temperature
P-Option Units
(Style I Case)
RTD
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Adjust
255 North Union Street
Phone: 1-800-274-5368
Fax: 585-454-7805
78
SCI Transducer Cat. 52-89(MTD)
AUX. POWER
DC
OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
RTD
Phone: 1-800-274-5368
Fax: 585-454-7805
79
78-79
1/9/02, 5:29 PM
Ordering Procedure
Exceltronic Temperature Transducers
Ordering Procedure
Exceltronic Temperature Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
-RS
Output
Scaling
Resistor
Option #1
Table 1
Table 2
Table 3
Option
#2
Option
#3
Table 4
Table 4
External
Auxiliary
Power
PAN7
Option
-24
-SM
Specify
output
voltage
-Z
-SM
-Z
Description
24 Vdc Loop-Powered (PA7 models only)
(consult factory for specifications)
Seismic Brace (available with 0-1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units)
9019C-RS-SM
0-1 mAdc Temperature Transducer for use with copper RTD, resistor scaling (converts current output to voltage output),
seismic brace.
WIRING DIAGRAMS FOR 0-1 mAdc UNITS (Styles III & II Cases) AND P-OPTION UNITS (Style I Case)
9019CPAN7-RS-SM-Z
4-20 mAdc Temperature Transducer for use with copper RTD, resistor scaling, seismic brace, zero-based output calibration
(-Z option converts 4-20 mAdc output to 0-20 mAdc output and -RS option converts current output to voltage output).
9015N Temperature
0-1 mAdc Units
(Style III Case)
For Use w/
RTD Type
Nickel-Iron
Platinum
Copper
RTD
Resistance
676 at 77 F
100 at 32 F
10 at 77 F
EXTERNAL
AUX. POWER
DC
OUTPUT
EXTERNAL
AUX. POWER
DC
OUTPUT
Temperature
Range*
-200 F to +500 F
-320 F to +1000 F
-100 F to +300 F
Temperature
Span*
50 F thru 150 F
150 F thru 300 F
150 F thru 300 F
Measurement
Accuracy
0.4 F or 1 F
0.8 F or 1.5 F
1 F or 2 F
Maximum
RTD Current
<3 mAdc
<5 mAdc
<50 mAdc
* You must specify minimum and maximum input temperature values from within the Temperature Range shown for each RTD type.
The resulting temperature span (maximum temperature value minus minimum temperature value) must fall within the Temperature
Span shown for each RTD type. (Example: Model 9015N temperature range = -195 F to -110 F and temperature span = 85 F.)
Exceltronic
9019C
EXAMPLES:
0-1 mAdc
output
P-Option
outputs
Description
Scaling Resistor***
RTD
RTD
This information is not part of the model number, but must be provided to the factory when you place your order.
** You must specify the Temperature Coefficient of Resistance (TCR) of your 100 platinum RTD probewhether it is designed to the
American Standard (TCR = .00392 //C), U.S. Industrial Standard (TCR = .00391 //C), or European Standard (TCR = .00385 //C).
This information is not part of the model number, but must be provided to the factory when you place your order.
9015N Temperature
P-Option Units
(Style I Case)
RTD
P-Option
PAN6
PAN7
PAN8
PA6
PA7
PA8
Output Range
1-5 mAdc
4-20 mAdc
10-50 mAdc
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Adjust
255 North Union Street
Phone: 1-800-274-5368
Fax: 585-454-7805
78
SCI Transducer Cat. 52-89(MTD)
AUX. POWER
DC
OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
RTD
Phone: 1-800-274-5368
Fax: 585-454-7805
79
78-79
1/9/02, 5:29 PM
MAV 2
Meter Accuracy Verifier
MAV2 offers
Simplicity, Safety, and Accuracy All In One
Compact Portable Meter-testing Instrument.
The MAV2 Meter Accuracy Verifier is a straightforward,
safe, and cost-effective instrument for on-site verification
and calibration of self-contained meter accuracy. Every
aspect of the MAV2s design and construction, from its
menu-driven operation to the lightweight and compact
package, is focused on the needs of the customer service
representative or field technicianincluding accuracy
assurance traceable to NIST.
TIFIE
Headquarters
50 Fordham Road
CER
Wilmington, MA 01887
Tel: 978-988-4101
Fax: 978-988-4179
E-Mail: power.industrial@ametek.com
Modules Available
Current
Voltage
Combined Current/Voltage
Expanded-Scale Voltage
Watt
Var
Combined Watt/Var
Phase Angle
Voltage Angle
Applications
Substations
Up to six transducers in
one module
SCADA
Frequency
Generating stations
Outputs
0 to 1 mAdc
15 or 135 mAdc
420 or 41220 mAdc
Temperature (RTD)
80
SCI Transducer Cat. 52-89(MTD)
Features
XLP Plug-In
SCIENTIFIC
Exceltronic XLP Modular
Plug-In Transducers
COLUMBUS
Phone: 1-800-274-5368
Fax: 585-454-7805
81
80-81
1/9/02, 5:29 PM
MAV 2
Meter Accuracy Verifier
MAV2 offers
Simplicity, Safety, and Accuracy All In One
Compact Portable Meter-testing Instrument.
The MAV2 Meter Accuracy Verifier is a straightforward,
safe, and cost-effective instrument for on-site verification
and calibration of self-contained meter accuracy. Every
aspect of the MAV2s design and construction, from its
menu-driven operation to the lightweight and compact
package, is focused on the needs of the customer service
representative or field technicianincluding accuracy
assurance traceable to NIST.
TIFIE
Headquarters
50 Fordham Road
CER
Wilmington, MA 01887
Tel: 978-988-4101
Fax: 978-988-4179
E-Mail: power.industrial@ametek.com
Modules Available
Current
Voltage
Combined Current/Voltage
Expanded-Scale Voltage
Watt
Var
Combined Watt/Var
Phase Angle
Voltage Angle
Applications
Substations
Up to six transducers in
one module
SCADA
Frequency
Generating stations
Outputs
0 to 1 mAdc
15 or 135 mAdc
420 or 41220 mAdc
Temperature (RTD)
80
SCI Transducer Cat. 52-89(MTD)
Features
XLP Plug-In
SCIENTIFIC
Exceltronic XLP Modular
Plug-In Transducers
COLUMBUS
Phone: 1-800-274-5368
Fax: 585-454-7805
81
80-81
1/9/02, 5:29 PM
Specifications
Exceltronic XLP AC Average-Sensing
Current or Voltage Transducers
Specifications
Current
Input
Voltage
Input
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
01 mAdc Amps
(Current Transducer)
P-Option* Amps
(Current Transducer)
5A
05 A
010 A
20 A
250 A
0.25 VA (maximum) at 5 A
5A
05 A
06 A
20 A
250 A
0.25 VA (maximum) at 5 A
N/A
N/A
120 V
0150 V
0150 V
180 V
2.2 VA (maximum) at 120 V
N/A
01 mAdc Volts
(Voltage Transducer)
Specifications
P-Option* Volts
(Voltage Transducer)
Voltage
Input
N/A
01 mAdc Volts
(Expanded-Scale Voltage Transducer)
120 V
0150 V
0165 V
180 V
2.2 VA (maximum) at 120 V
100130 Vac
50500 Hz
3 VA Nominal
None Required
None Required
100130 Vac
50500 Hz
3 VA Nominal
Accuracy
Temperature Effect on Accuracy
0.007% / C
0.01% / C
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
Load
010,000
< 2.5% RO
Compliance Voltage
1 mAdc for
Standard Calibration
Accuracy Standard
A4 Models
0.25% RO
0.1% RO
0.25% of Span
0.25% RO
0.1% RO
0.25% of Span
0.01% / C
0.015% / C
0.01% / C
0.015% / C
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
10 Vdc
25 Vdc
Frequency Range
5565 Hz
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
Load
010,000
010,000
< 0.25% RO
< 0.25% RO
Response Time
Standard Calibration
Adjustments
0.15% of Span,
Noncumulative
Operating Humidity
0.25% RO,
Noncumulative
0.3% of Span,
Noncumulative
20% of Span
5% of Span
095% Noncondensing
Operating Humidity
Isolation
Complete (Input/Output/Case)
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Weights vary by model; consult factory.
Approximate Dimensions
095% Noncondensing
Isolation
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Dielectric Withstand
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
*P-Option includes 15 and 420 mAdc outputs. Not available on all models.
Phone: 1-800-274-5368
Fax: 585-454-7805
82
SCI Transducer Cat. 52-89(MTD)
Gain
Zero
Dielectric Withstand
Frequency Range
Response Time
Standard Calibration
Adjustments
XLP Plug-In
Compliance Voltage
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
P-Option* Volts
(Expanded-Scale Voltage Transducer)
Span/Range
Overload Continuous
Burden/Element
100130 Vac
50500 Hz
3 VA Nominal
None Required
Specifications
Exceltronic XLP AC ExpandedScale Voltage Transducers
Phone: 1-800-274-5368
Fax: 585-454-7805
83
82-83
1/9/02, 5:29 PM
Specifications
Exceltronic XLP AC Average-Sensing
Current or Voltage Transducers
Specifications
Current
Input
Voltage
Input
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
01 mAdc Amps
(Current Transducer)
P-Option* Amps
(Current Transducer)
5A
05 A
010 A
20 A
250 A
0.25 VA (maximum) at 5 A
5A
05 A
06 A
20 A
250 A
0.25 VA (maximum) at 5 A
N/A
N/A
120 V
0150 V
0150 V
180 V
2.2 VA (maximum) at 120 V
N/A
01 mAdc Volts
(Voltage Transducer)
Specifications
P-Option* Volts
(Voltage Transducer)
Voltage
Input
N/A
01 mAdc Volts
(Expanded-Scale Voltage Transducer)
120 V
0150 V
0165 V
180 V
2.2 VA (maximum) at 120 V
100130 Vac
50500 Hz
3 VA Nominal
None Required
None Required
100130 Vac
50500 Hz
3 VA Nominal
Accuracy
Temperature Effect on Accuracy
0.007% / C
0.01% / C
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
Load
010,000
< 2.5% RO
Compliance Voltage
1 mAdc for
Standard Calibration
Accuracy Standard
A4 Models
0.25% RO
0.1% RO
0.25% of Span
0.25% RO
0.1% RO
0.25% of Span
0.01% / C
0.015% / C
0.01% / C
0.015% / C
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
10 Vdc
25 Vdc
Frequency Range
5565 Hz
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
Load
010,000
010,000
< 0.25% RO
< 0.25% RO
Response Time
Standard Calibration
Adjustments
0.15% of Span,
Noncumulative
Operating Humidity
0.25% RO,
Noncumulative
0.3% of Span,
Noncumulative
20% of Span
5% of Span
095% Noncondensing
Operating Humidity
Isolation
Complete (Input/Output/Case)
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Weights vary by model; consult factory.
Approximate Dimensions
095% Noncondensing
Isolation
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Dielectric Withstand
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
*P-Option includes 15 and 420 mAdc outputs. Not available on all models.
Phone: 1-800-274-5368
Fax: 585-454-7805
82
SCI Transducer Cat. 52-89(MTD)
Gain
Zero
Dielectric Withstand
Frequency Range
Response Time
Standard Calibration
Adjustments
XLP Plug-In
Compliance Voltage
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
P-Option* Volts
(Expanded-Scale Voltage Transducer)
Span/Range
Overload Continuous
Burden/Element
100130 Vac
50500 Hz
3 VA Nominal
None Required
Specifications
Exceltronic XLP AC ExpandedScale Voltage Transducers
Phone: 1-800-274-5368
Fax: 585-454-7805
83
82-83
1/9/02, 5:29 PM
Specifications
Exceltronic XLP Combined
AC Watt/Var Transducers
Specifications
Exceltronic XLP AC Watt
or Var Transducers
0 to 1 mAdc Watts
(Watt Transducer)
Specifications
0 to 1 mAdc Vars
(Var Transducer)
P-Option* Watts
(Watt Transducer)
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
25 Vdc
10 Vdc
25 Vdc
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
Power Factor
PF Effect on Accuracy
Gain
Zero
0.1% VA (maximum)
0.15% VA (maximum)
2% of Reading (minimum)
20% of Span (minimum)
5% of Zero Point (minimum)
None Required
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Frequency Range
5862 Hz
0.1% RO,
Noncumulative
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
7 VA Nominal
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
Temperature Effect on Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Load
10 Vdc
25 Vdc
10 Vdc
25 Vdc
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
< 0.5% RO
60 Hz
0.15% of Span,
Noncumulative
0.25% of Span,
Noncumulative
0.2% RO,
Noncumulative
Power Factor
Any
PF Effect on Accuracy
Standard Calibration
Adjustments
Gain
Zero
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
60 Hz
0.1% RO,
Noncumulative
Phone: 1-800-274-5368
Fax: 585-454-7805
0.25% of Span,
Noncumulative
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
Weights vary by model; consult factory.
See enclosure diagrams on page 85.
Approximate Dimensions
Overrange with Linearity
0.2% RO,
Noncumulative
095% Noncondensing
0.15% of Span,
Noncumulative
Complete (Input/Output/Power/Case)
Surge Withstand
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Dielectric Withstand
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Isolation
0.15% VA (maximum)
Operating Humidity
Complete (Input/Output/Power/Case)
Dielectric Withstand
0.1% VA (maximum)
Frequency
095% Noncondensing
Isolation
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
84
SCI Transducer Cat. 52-89(MTD)
100130 Vac
50500 Hz
7 VA Nominal
Response Time
Any
P-Option* Vars
(Combined Watt/Var
Transducer)
85135 Vac
50500 Hz
3 VA Nominal
0 to 1 mAdc Vars
(Combined Watt/Var
Transducer)
P-Option* Watts
(Combined Watt/Var
Transducer)
Current
Input
< 0.5% RO
Response Time
Standard Calibration
Adjustments
0 to 1 mAdc Watts
(Combined Watt/Var
Transducer)
XLP Plug-In
Load
Specifications
P-Option* Vars
(Var Transducer)
Phone: 1-800-274-5368
Fax: 585-454-7805
85
84-85
1/9/02, 5:29 PM
Specifications
Exceltronic XLP Combined
AC Watt/Var Transducers
Specifications
Exceltronic XLP AC Watt
or Var Transducers
0 to 1 mAdc Watts
(Watt Transducer)
Specifications
0 to 1 mAdc Vars
(Var Transducer)
P-Option* Watts
(Watt Transducer)
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
5 VA Nominal
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
10 Vdc
25 Vdc
10 Vdc
25 Vdc
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
20 A
250 A
0.2 VA (maximum) at 5 A
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
120 V
0150 V
200 V
0.02 VA (maximum) at 120 V
Power Factor
PF Effect on Accuracy
Gain
Zero
0.1% VA (maximum)
0.15% VA (maximum)
2% of Reading (minimum)
20% of Span (minimum)
5% of Zero Point (minimum)
None Required
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Frequency Range
5862 Hz
0.1% RO,
Noncumulative
85135 Vac
50500 Hz
3 VA Nominal
100130 Vac
50500 Hz
7 VA Nominal
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
(0.2% Reading + 0.01% RO) (0.2% Reading + 0.05% RO) (0.2% Reading + 0.02% RO) (0.3% Reading + 0.05% RO)
at 0120% RO
at 0200% RO
at 0120% RO
at 0200% RO
Accuracy
Temperature Effect on Accuracy
0.005% / C
0.0075% / C
0.009% / C
0.012% / C
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Load
10 Vdc
25 Vdc
10 Vdc
25 Vdc
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
010,000
05,000 for
15/135 mAdc units
01,250 for
420/41220 mAdc units
< 0.5% RO
60 Hz
0.15% of Span,
Noncumulative
0.25% of Span,
Noncumulative
0.2% RO,
Noncumulative
Power Factor
Any
PF Effect on Accuracy
Standard Calibration
Adjustments
Gain
Zero
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
60 Hz
0.1% RO,
Noncumulative
Phone: 1-800-274-5368
Fax: 585-454-7805
0.25% of Span,
Noncumulative
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
Weights vary by model; consult factory.
See enclosure diagrams on page 85.
Approximate Dimensions
Overrange with Linearity
0.2% RO,
Noncumulative
095% Noncondensing
0.15% of Span,
Noncumulative
Complete (Input/Output/Power/Case)
Surge Withstand
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Dielectric Withstand
2% of Reading (minimum)
20% of Span (minimum)
None Required
5% of Zero Point (minimum)
Isolation
0.15% VA (maximum)
Operating Humidity
Complete (Input/Output/Power/Case)
Dielectric Withstand
0.1% VA (maximum)
Frequency
095% Noncondensing
Isolation
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
84
SCI Transducer Cat. 52-89(MTD)
100130 Vac
50500 Hz
7 VA Nominal
Response Time
Any
P-Option* Vars
(Combined Watt/Var
Transducer)
85135 Vac
50500 Hz
3 VA Nominal
0 to 1 mAdc Vars
(Combined Watt/Var
Transducer)
P-Option* Watts
(Combined Watt/Var
Transducer)
Current
Input
< 0.5% RO
Response Time
Standard Calibration
Adjustments
0 to 1 mAdc Watts
(Combined Watt/Var
Transducer)
XLP Plug-In
Load
Specifications
P-Option* Vars
(Var Transducer)
Phone: 1-800-274-5368
Fax: 585-454-7805
85
84-85
1/9/02, 5:29 PM
Specifications
Exceltronic XLP AC Phase Angle
or Voltage Angle Transducers
0 to 1 mAdc
(Phase Angle
Transducer)
Specifications
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Second
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
5A
0.55 A
10 A
250 A
0.2 VA (maximum) at 5 A
None Required
100130 Vac
50500 Hz
2 VA Nominal
100130 Vac
50500 Hz
2 VA Nominal
None Required
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
0.5
-20 C to +60 C
0.6
0.6
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
10 Vdc
25 Vdc
010,000
010,000
< 1% RO
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
0.0025% / C
0.005% / C
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
010,000
Compliance Voltage
Load
Output Ripple Peak
< 1% RO
< 1% of Span
Response Time
5% of Span (minimum)
10% of Span (minimum)
Operating Humidity
Isolation
Complete (Input/Output/Case)
Dielectric Withstand
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
Nominal 3%
Frequency
1% RO,
Noncumulative
1% of Span,
Noncumulative
1% RO,
Noncumulative
1% of Span,
Noncumulative
095% Noncondensing
Isolation
Complete
(Input/Output/Case)
Dielectric Withstand
Complete
(Input/Output/Power/Case)
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
Surge Withstand
Phone: 1-800-274-5368
Fax: 585-454-7805
86
SCI Transducer Cat. 52-89(MTD)
0.5
-20 C to +50 C
Accuracy
Standard Calibration
Adjustments
100130 Vac
50500 Hz
2 VA Nominal
None Required
XLP Plug-In
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
P-Option*
(Frequency Transducer)
120 V
90150 V
150 V
2 VA (maximum) at 120 V
Nominal
Range
Overload Continuous
Burden/Element
1 at 25 C
Voltage
Input
120 V
50135 V
150 V
2.2 VA (maximum) at 120 V
N/A
01 mAdc
(Frequency Transducer)
Specifications
N/A
Accuracy
Standard Calibration
Adjustments
P-Option*
(Voltage Angle
Transducer)
120 V
95135 V
150 V
4 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
0 to 1 mAdc
(Voltage Angle
Transducer)
P-Option*
(Phase Angle
Transducer)
Specifications
Exceltronic XLP AC Frequency Transducers
Phone: 1-800-274-5368
Fax: 585-454-7805
87
86-87
1/9/02, 5:29 PM
Specifications
Exceltronic XLP AC Phase Angle
or Voltage Angle Transducers
0 to 1 mAdc
(Phase Angle
Transducer)
Specifications
Current
Input
Nominal
Range**
Overload Continuous
Overload 1 Second/Hour
Burden/Element
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
Second
Voltage
Input
Nominal
Range**
Overload Continuous
Burden/Element
5A
0.55 A
10 A
250 A
0.2 VA (maximum) at 5 A
None Required
100130 Vac
50500 Hz
2 VA Nominal
100130 Vac
50500 Hz
2 VA Nominal
None Required
1 mAdc for
Standard Calibration
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
0.5
-20 C to +60 C
0.6
0.6
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
10 Vdc
25 Vdc
010,000
010,000
< 1% RO
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
0.0025% / C
0.005% / C
-20 C to +60 C
-20 C to +50 C
10 Vdc
25 Vdc
010,000
Compliance Voltage
Load
Output Ripple Peak
< 1% RO
< 1% of Span
Response Time
5% of Span (minimum)
10% of Span (minimum)
Operating Humidity
Isolation
Complete (Input/Output/Case)
Dielectric Withstand
Complete (Input/Output/Power/Case)
1500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
3% of Reading (minimum)
20% of Span (minimum)
2% RO (minimum)
5% of Zero Point (minimum)
Nominal 3%
Frequency
1% RO,
Noncumulative
1% of Span,
Noncumulative
1% RO,
Noncumulative
1% of Span,
Noncumulative
095% Noncondensing
Isolation
Complete
(Input/Output/Case)
Dielectric Withstand
Complete
(Input/Output/Power/Case)
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
1500 VRMS at 60 Hz
ANSI/IEEE C37.90.1
Surge Withstand
Phone: 1-800-274-5368
Fax: 585-454-7805
86
SCI Transducer Cat. 52-89(MTD)
0.5
-20 C to +50 C
Accuracy
Standard Calibration
Adjustments
100130 Vac
50500 Hz
2 VA Nominal
None Required
XLP Plug-In
5 or 20 mAdc for
Std. Calibration, depending on
selected output range*
P-Option*
(Frequency Transducer)
120 V
90150 V
150 V
2 VA (maximum) at 120 V
Nominal
Range
Overload Continuous
Burden/Element
1 at 25 C
Voltage
Input
120 V
50135 V
150 V
2.2 VA (maximum) at 120 V
N/A
01 mAdc
(Frequency Transducer)
Specifications
N/A
Accuracy
Standard Calibration
Adjustments
P-Option*
(Voltage Angle
Transducer)
120 V
95135 V
150 V
4 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
0 to 1 mAdc
(Voltage Angle
Transducer)
P-Option*
(Phase Angle
Transducer)
Specifications
Exceltronic XLP AC Frequency Transducers
Phone: 1-800-274-5368
Fax: 585-454-7805
87
86-87
1/9/02, 5:29 PM
Enclosure Drawings
Exceltronic XLP Modular
Plug-In Transducers
Specifications
Exceltronic XLP Temperature
Transducers
ENCLOSURE DRAWINGS
Specifications
External Input Range
Auxiliary Frequency Range
Burden
Power
Rated Output (RO)
01 mAdc
(Temperature Transducer)
P-Option*
(Temperature Transducer)
90130 Vac
50500 Hz
3.5 VA Nominal
100130 Vac
50500 Hz
5.5 VA Nominal
Accuracy Nickel-Iron
Platinum
Copper
0.015% / F
0.017% / F
Compliance Voltage
10 Vdc
25 Vdc
16 Vdc
30 Vdc
010,000
Load
Output Ripple Peak
< 1% RO
< 1% of Span
Response Time
4-Module Enclosure
6.57"
(166.89 mm)
5.82"
(147.83 mm)
0.8% of Span
0.5% of Span
0.8% of Span
Standard Calibration
Adjustments
2-Module Enclosure
4.00"
(101.60 mm)
4.52"
MAX.
(114.81 mm)
7.00"
(177.80 mm)
7.00"
4.00"
(101.60 mm) (177.80 mm)
1.50"
(38.10 mm)
8.65" MAX.
(219.71 mm)
1.50"
(38.10 mm)
< 50 ms to 99%
Gain
Zero
5% of Span (minimum)
3% of Span (minimum)
Operating Humidity
095% Noncondensing
Isolation
Dielectric Withstand
1500 VRMS at 60 Hz
Surge Withstand
Maximum Net Weight
Approximate Dimensions
ANSI/IEEE C37.90.1
Instrumentation
4.00"
7.00"
(101.60 mm) (177.80 mm)
Enclosure
Module
(side view)
1.50"
(38.10 mm)
FRONT OF MODULE
0.061" (1.55 mm)
BEHIND THIS LINE
Phone: 1-800-274-5368
Fax: 585-454-7805
88
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
89
88-89
1/9/02, 5:29 PM
Enclosure Drawings
Exceltronic XLP Modular
Plug-In Transducers
Specifications
Exceltronic XLP Temperature
Transducers
ENCLOSURE DRAWINGS
Specifications
External Input Range
Auxiliary Frequency Range
Burden
Power
Rated Output (RO)
01 mAdc
(Temperature Transducer)
P-Option*
(Temperature Transducer)
90130 Vac
50500 Hz
3.5 VA Nominal
100130 Vac
50500 Hz
5.5 VA Nominal
Accuracy Nickel-Iron
Platinum
Copper
0.015% / F
0.017% / F
Compliance Voltage
10 Vdc
25 Vdc
16 Vdc
30 Vdc
010,000
Load
Output Ripple Peak
< 1% RO
< 1% of Span
Response Time
4-Module Enclosure
6.57"
(166.89 mm)
5.82"
(147.83 mm)
0.8% of Span
0.5% of Span
0.8% of Span
Standard Calibration
Adjustments
2-Module Enclosure
4.00"
(101.60 mm)
4.52"
MAX.
(114.81 mm)
7.00"
(177.80 mm)
7.00"
4.00"
(101.60 mm) (177.80 mm)
1.50"
(38.10 mm)
8.65" MAX.
(219.71 mm)
1.50"
(38.10 mm)
< 50 ms to 99%
Gain
Zero
5% of Span (minimum)
3% of Span (minimum)
Operating Humidity
095% Noncondensing
Isolation
Dielectric Withstand
1500 VRMS at 60 Hz
Surge Withstand
Maximum Net Weight
Approximate Dimensions
ANSI/IEEE C37.90.1
Instrumentation
4.00"
7.00"
(101.60 mm) (177.80 mm)
Enclosure
Module
(side view)
1.50"
(38.10 mm)
FRONT OF MODULE
0.061" (1.55 mm)
BEHIND THIS LINE
Phone: 1-800-274-5368
Fax: 585-454-7805
88
SCI Transducer Cat. 52-89(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
89
88-89
1/9/02, 5:29 PM
Ordering Procedure
Exceltronic XLP Modular
Plug-In Transducers
Ordering Procedure
Exceltronic XLP Modular
Plug-In Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
Option
#1
Option
#2
Tables 1 thru 5
Table 6
Table 7
Table 7
A2
-FA
Watt
Model No.
XLPW10
XLPW15
XLPW20
XLPW25
XLPW30
External
Aux. Power
0 to 1 mAdc
output
XLPWV20
Var
Model No.
XLPV10
XLPV15
XLPV20
XLPV25
XLPV30
Description
1-Element Watt
11/2-Element Watt
2-Element Watt
21/2-Element Watt
3-Element Watt
Description
1-Element Var
11/2-Element Var
2-Element Var
21/2-Element Var
3-Element Var
Combined Watt/
Var Model No.
XLPWV10
XLPWV15
XLPWV20
XLPWV25
XLPWV30
XLPWV10-30*
Description
1-Element Watt/Var
11/2-Element Watt/Var
2-Element Watt/Var
21/2-Element Watt/Var
3-Element Watt/Var
Three 1-Element Watt/Vars
* Not available with 1-5 or 4-20 mAdc outputs.
P-Option
outputs
EXAMPLES:
P7-B
XLPWV20A2-FA
2-element, 0 to 1 mAdc Watt/Var Plug-In Transducer; 120 Vac external auxiliary power; front access.
XLPWV20P7-BA2-FA
2-element, 4-12-20 mAdc Watt/Var Plug-In Transducer; 120 Vac external auxiliary power; front access.
You must specify a model number for each module position in the
bin (l-r). Specify unused positions as either "blank" or "empty".
8-Position Bin
4-Position Bin
2-Position Bin
Quantity of Blanks
10093-001K
10387-001K
10386-001K
10184-001
Description
One Current Unit
Two Current Units
Three Current Units
Description
One Voltage Unit
Two Voltage Units
Three Voltage Units
Four Voltage Units
Combined Current/
Voltage Model No.
XLPCE
XLPC2E
XLPC3E*
XLPCE2
XLPCE3*
XLPCE4*
XLPC2E2*
XLPC2E3*
XLPC2E4*
XLPC3E2*
XLPC3E3*
Description
One Voltage Unit (with 90-150 V
expanded-scale option)
Two Voltage Units (with 90-150 V
expanded-scale option)
Three Voltage Units (with 90-150 V
expanded-scale option)
XLPEX2
XLPEX3
Description
One Current Unit/One Voltage Unit
Two Current Units/One Voltage Unit
Three Current Units/One Voltage Unit
One Current Unit/Two Voltage Units
One Current Unit/Three Voltage Units
One Current Unit/Four Voltage Units
Two Current Units/Two Voltage Units
Two Current Units/Three Voltage Units
Two Current Units/Four Voltage Units
Three Current Units/Two Voltage Units
Three Current Units/Three Voltage Units
Phone: 1-800-274-5368
Description
One 45 Voltage Angle Unit
One 60 Voltage Angle Unit
One 75 Voltage Angle Unit
One 180 Voltage Angle Unit
Two 45 Voltage Angle Units
Two 60 Voltage Angle Units
Two 75 Voltage Angle Units
Two 180 Voltage Angle Units
Description
One 50 Hz Frequency Unit
One 60 Hz Frequency Unit
One 400 Hz Frequency Unit
Two 50 Hz Frequency Units
Two 60 Hz Frequency Units
Two 400 Hz Frequency Units
Description
One Nickel-Iron Temperature Unit
One Platinum Temperature Unit
One Copper Temperature Unit
Two Nickel-Iron Temperature Units
Two Platinum Temperature Units
Two Copper Temperature Units
Output Range
1-5 mAdc
4-20 mAdc
1-3-5 mAdc
4-12-20 mAdc
Compliance Voltage
25 Vdc
25 Vdc
25 Vdc
25 Vdc
Maximum Load
5000
1250
5000
1250
** P6 and P7 options are available for all XLP types except Phase Angle and Voltage Angle.
*** P6-B and P7-B options are available for all XLP types except Current, Voltage, Frequency, and Temperature.
Table 7 Options
Option
-1
-5
A2****
-FA
Description
240 V Input
10 A Input
External Auxiliary Power (120 Vac std.)
Front Access
**** Most XLP transducers come standard with internal auxiliary power (A4 option).
If you require external auxiliary power, the A2 option designator should come
before any other options in the complete model number.
If you require additional options not shown here, please consult the factory.
Combined Watt/Watthour or Var/Varhour and Combined Phase/Voltage Angle transducers are available in XLP format on special order.
Please consult the factory for more information.
Fax: 585-454-7805
90
SCI Transducer Cat 90-134(MTD)
Description
One 45 Phase Angle Unit
One 60 Phase Angle Unit
One 75 Phase Angle Unit
One 180 Phase Angle Unit
Two 45 Phase Angle Units
Two 60 Phase Angle Units
Two 75 Phase Angle Units
Two 180 Phase Angle Units
Expanded-Scale
Voltage Model No.
XLPEX
Instrumentation
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
91
90-91
1/9/02, 5:32 PM
Ordering Procedure
Exceltronic XLP Modular
Plug-In Transducers
Ordering Procedure
Exceltronic XLP Modular
Plug-In Transducers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Output
Option
#1
Option
#2
Tables 1 thru 5
Table 6
Table 7
Table 7
A2
-FA
Watt
Model No.
XLPW10
XLPW15
XLPW20
XLPW25
XLPW30
External
Aux. Power
0 to 1 mAdc
output
XLPWV20
Var
Model No.
XLPV10
XLPV15
XLPV20
XLPV25
XLPV30
Description
1-Element Watt
11/2-Element Watt
2-Element Watt
21/2-Element Watt
3-Element Watt
Description
1-Element Var
11/2-Element Var
2-Element Var
21/2-Element Var
3-Element Var
Combined Watt/
Var Model No.
XLPWV10
XLPWV15
XLPWV20
XLPWV25
XLPWV30
XLPWV10-30*
Description
1-Element Watt/Var
11/2-Element Watt/Var
2-Element Watt/Var
21/2-Element Watt/Var
3-Element Watt/Var
Three 1-Element Watt/Vars
* Not available with 1-5 or 4-20 mAdc outputs.
P-Option
outputs
EXAMPLES:
P7-B
XLPWV20A2-FA
2-element, 0 to 1 mAdc Watt/Var Plug-In Transducer; 120 Vac external auxiliary power; front access.
XLPWV20P7-BA2-FA
2-element, 4-12-20 mAdc Watt/Var Plug-In Transducer; 120 Vac external auxiliary power; front access.
You must specify a model number for each module position in the
bin (l-r). Specify unused positions as either "blank" or "empty".
8-Position Bin
4-Position Bin
2-Position Bin
Quantity of Blanks
10093-001K
10387-001K
10386-001K
10184-001
Description
One Current Unit
Two Current Units
Three Current Units
Description
One Voltage Unit
Two Voltage Units
Three Voltage Units
Four Voltage Units
Combined Current/
Voltage Model No.
XLPCE
XLPC2E
XLPC3E*
XLPCE2
XLPCE3*
XLPCE4*
XLPC2E2*
XLPC2E3*
XLPC2E4*
XLPC3E2*
XLPC3E3*
Description
One Voltage Unit (with 90-150 V
expanded-scale option)
Two Voltage Units (with 90-150 V
expanded-scale option)
Three Voltage Units (with 90-150 V
expanded-scale option)
XLPEX2
XLPEX3
Description
One Current Unit/One Voltage Unit
Two Current Units/One Voltage Unit
Three Current Units/One Voltage Unit
One Current Unit/Two Voltage Units
One Current Unit/Three Voltage Units
One Current Unit/Four Voltage Units
Two Current Units/Two Voltage Units
Two Current Units/Three Voltage Units
Two Current Units/Four Voltage Units
Three Current Units/Two Voltage Units
Three Current Units/Three Voltage Units
Phone: 1-800-274-5368
Description
One 45 Voltage Angle Unit
One 60 Voltage Angle Unit
One 75 Voltage Angle Unit
One 180 Voltage Angle Unit
Two 45 Voltage Angle Units
Two 60 Voltage Angle Units
Two 75 Voltage Angle Units
Two 180 Voltage Angle Units
Description
One 50 Hz Frequency Unit
One 60 Hz Frequency Unit
One 400 Hz Frequency Unit
Two 50 Hz Frequency Units
Two 60 Hz Frequency Units
Two 400 Hz Frequency Units
Description
One Nickel-Iron Temperature Unit
One Platinum Temperature Unit
One Copper Temperature Unit
Two Nickel-Iron Temperature Units
Two Platinum Temperature Units
Two Copper Temperature Units
Output Range
1-5 mAdc
4-20 mAdc
1-3-5 mAdc
4-12-20 mAdc
Compliance Voltage
25 Vdc
25 Vdc
25 Vdc
25 Vdc
Maximum Load
5000
1250
5000
1250
** P6 and P7 options are available for all XLP types except Phase Angle and Voltage Angle.
*** P6-B and P7-B options are available for all XLP types except Current, Voltage, Frequency, and Temperature.
Table 7 Options
Option
-1
-5
A2****
-FA
Description
240 V Input
10 A Input
External Auxiliary Power (120 Vac std.)
Front Access
**** Most XLP transducers come standard with internal auxiliary power (A4 option).
If you require external auxiliary power, the A2 option designator should come
before any other options in the complete model number.
If you require additional options not shown here, please consult the factory.
Combined Watt/Watthour or Var/Varhour and Combined Phase/Voltage Angle transducers are available in XLP format on special order.
Please consult the factory for more information.
Fax: 585-454-7805
90
SCI Transducer Cat 90-134(MTD)
Description
One 45 Phase Angle Unit
One 60 Phase Angle Unit
One 75 Phase Angle Unit
One 180 Phase Angle Unit
Two 45 Phase Angle Units
Two 60 Phase Angle Units
Two 75 Phase Angle Units
Two 180 Phase Angle Units
Expanded-Scale
Voltage Model No.
XLPEX
Instrumentation
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
91
90-91
1/9/02, 5:32 PM
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
WIRING DIAGRAMS
WIRING DIAGRAMS
Models C, C2, C3 Current
1
2
INPUT
CURRENT 1
INPUT
CURRENT 1
AMPS
1
3
AMPS
2
INPUT
CURRENT 2
AMPS
2
INPUT
CURRENT 2
AMPS
3
INPUT
CURRENT 3
OUTPUT 1
OUTPUT 1
0-1 mAdc
LOAD 0-10K OHMS
+
OUTPUT 2
0-1 mAdc
LOAD 0-10K OHMS
11
VOLTS
5
OUTPUT
1-5 mA
4-20 mA
LOAD RANGE
0-5K OHMS
0-1250 OHMS
9
OUTPUT 2
*
10
11
OUTPUT 3
0-1 mAdc
LOAD 0-10K OHMS
+
3
-007
OUTPUT 4
0-1 mAdc
LOAD 0-10K OHMS
11
+
OUTPUT 2
LOAD RANGE
0-5K OHMS
0-1250 OHMS
11
OUTPUT 5
0-1 mAdc
LOAD 0-10K OHMS
12
14
OUTPUT 1
10
AUX. PWR.
10
13
EXTERNAL
AUX. POWER
7
OUTPUT 1
0-1 mAdc
LOAD 0-10K OHMS
EXTERNAL
AUX. POWER
AUX. PWR.
12
INPUT
VOLTAGE 5
OUTPUT 3
12
INPUT
VOLTAGE 2
10
VOLTS
2
XLP Plug-In
OUTPUTS
INPUT
CURRENT 1
OUTPUTS
INPUT
VOLTAGE 4
5
7
VOLTS
4
AMPS
1
INPUT
CURRENT 3
OUTPUTS
AMPS
3
INPUT
CURRENT 1
AMPS
1
OUTPUTS
AMPS
1
12
-005
-008
-013
1
INPUT
VOLTAGE 1
1
VOLTS
1
INPUT
VOLTAGE 1
VOLTS
1
2
3
INPUT
VOLTAGE 2
3
VOLTS
2
INPUT
VOLTAGE 2
5
INPUT
VOLTAGE 3
5
VOLTS
3
OUTPUT 2
0-1 mAdc
LOAD 0-10K OHMS
OUTPUT
1-5 mA
4-20 mA
LOAD RANGE
0-5K OHMS
0-1250 OHMS
9
OUTPUT 2
10
11
OUTPUT 3
0-1 mAdc
LOAD 0-10K OHMS
12
VOLT
6
13
EXTERNAL
AUX. POWER
-006
15
16
17
19
OUT
4
OUTPUT 5
0-1 mAdc
OUT
5
OUTPUT 6
0-1 mAdc
14
18
OUTPUT 4
0-1 mAdc
12
20
+ 9
21
10
22
+ 11
OUT
6
12
INPUT
VOLTAGE 4
VOLT
4
AMP
2
INPUT
CURRENT 2
INPUT
VOLTAGE 5
VOLT
5
AMP
3
INPUT
CURRENT 3
INPUT
VOLTAGE 6
VOLT
6
+
OUT
1
OUT
2
OUT
3
Phone: 1-800-274-5368
Fax: 585-454-7805
15
18
+ 7
19
OUT
5
OUTPUT 5
0-1 mAdc
-013
14
17
OUTPUT 2
0-1 mAdc
OUTPUT(S) 0-1 mA
INTO 0-10K OHMS LOAD
OUT
4
OUTPUT 6
0-1 mAdc
13
16
OUTPUT 4
0-1 mAdc
OUTPUT 3
0-1 mAdc
OUTPUT 1
0-1 mAdc
14
92
SCI Transducer Cat 90-134(MTD)
INPUT
CURRENT 1
+
23
24
NUMBERS CORRESPOND
TO CHANNEL NUMBERS
ON PC BOARD
AMP
1
AUX. PWR.
-006
13
+ 7
OUTPUT 3
10
11
INPUT
VOLTAGE 6
1
OUTPUTS
OUTPUTS
*
+
VOLT
5
OUTPUT 1
0-1 mAdc
LOAD 0-10K OHMS
OUTPUT 1
INPUT
VOLTAGE 5
VOLTS
3
VOLT
4
INPUT
VOLTAGE 3
6
7
INPUT
VOLTAGE 4
VOLTS
2
20
+ 9
21
10
22
+ 11
23
OUT
6
12
24
VOLT
1
INPUT
VOLTAGE 1
AMP
2
INPUT
CURRENT 2
AMP
3
INPUT
CURRENT 3
XLPC2E4
ONLY
+
OUT
1
OUTPUT 1
0-1 mAdc
+
OUT
2
OUTPUT 2
0-1 mAdc
+
OUT
3
OUTPUT 3
0-1 mAdc
OUTPUT(S) 0-1 mA
INTO 0-10K OHMS LOAD
-014
Phone: 1-800-274-5368
Fax: 585-454-7805
93
92-93
1/9/02, 5:32 PM
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
WIRING DIAGRAMS
WIRING DIAGRAMS
Models C, C2, C3 Current
1
2
INPUT
CURRENT 1
INPUT
CURRENT 1
AMPS
1
3
AMPS
2
INPUT
CURRENT 2
AMPS
2
INPUT
CURRENT 2
AMPS
3
INPUT
CURRENT 3
OUTPUT 1
OUTPUT 1
0-1 mAdc
LOAD 0-10K OHMS
+
OUTPUT 2
0-1 mAdc
LOAD 0-10K OHMS
11
VOLTS
5
OUTPUT
1-5 mA
4-20 mA
LOAD RANGE
0-5K OHMS
0-1250 OHMS
9
OUTPUT 2
*
10
11
OUTPUT 3
0-1 mAdc
LOAD 0-10K OHMS
+
3
-007
OUTPUT 4
0-1 mAdc
LOAD 0-10K OHMS
11
+
OUTPUT 2
LOAD RANGE
0-5K OHMS
0-1250 OHMS
11
OUTPUT 5
0-1 mAdc
LOAD 0-10K OHMS
12
14
OUTPUT 1
10
AUX. PWR.
10
13
EXTERNAL
AUX. POWER
7
OUTPUT 1
0-1 mAdc
LOAD 0-10K OHMS
EXTERNAL
AUX. POWER
AUX. PWR.
12
INPUT
VOLTAGE 5
OUTPUT 3
12
INPUT
VOLTAGE 2
10
VOLTS
2
XLP Plug-In
OUTPUTS
INPUT
CURRENT 1
OUTPUTS
INPUT
VOLTAGE 4
5
7
VOLTS
4
AMPS
1
INPUT
CURRENT 3
OUTPUTS
AMPS
3
INPUT
CURRENT 1
AMPS
1
OUTPUTS
AMPS
1
12
-005
-008
-013
1
INPUT
VOLTAGE 1
1
VOLTS
1
INPUT
VOLTAGE 1
VOLTS
1
2
3
INPUT
VOLTAGE 2
3
VOLTS
2
INPUT
VOLTAGE 2
5
INPUT
VOLTAGE 3
5
VOLTS
3
OUTPUT 2
0-1 mAdc
LOAD 0-10K OHMS
OUTPUT
1-5 mA
4-20 mA
LOAD RANGE
0-5K OHMS
0-1250 OHMS
9
OUTPUT 2
10
11
OUTPUT 3
0-1 mAdc
LOAD 0-10K OHMS
12
VOLT
6
13
EXTERNAL
AUX. POWER
-006
15
16
17
19
OUT
4
OUTPUT 5
0-1 mAdc
OUT
5
OUTPUT 6
0-1 mAdc
14
18
OUTPUT 4
0-1 mAdc
12
20
+ 9
21
10
22
+ 11
OUT
6
12
INPUT
VOLTAGE 4
VOLT
4
AMP
2
INPUT
CURRENT 2
INPUT
VOLTAGE 5
VOLT
5
AMP
3
INPUT
CURRENT 3
INPUT
VOLTAGE 6
VOLT
6
+
OUT
1
OUT
2
OUT
3
Phone: 1-800-274-5368
Fax: 585-454-7805
15
18
+ 7
19
OUT
5
OUTPUT 5
0-1 mAdc
-013
14
17
OUTPUT 2
0-1 mAdc
OUTPUT(S) 0-1 mA
INTO 0-10K OHMS LOAD
OUT
4
OUTPUT 6
0-1 mAdc
13
16
OUTPUT 4
0-1 mAdc
OUTPUT 3
0-1 mAdc
OUTPUT 1
0-1 mAdc
14
92
SCI Transducer Cat 90-134(MTD)
INPUT
CURRENT 1
+
23
24
NUMBERS CORRESPOND
TO CHANNEL NUMBERS
ON PC BOARD
AMP
1
AUX. PWR.
-006
13
+ 7
OUTPUT 3
10
11
INPUT
VOLTAGE 6
1
OUTPUTS
OUTPUTS
*
+
VOLT
5
OUTPUT 1
0-1 mAdc
LOAD 0-10K OHMS
OUTPUT 1
INPUT
VOLTAGE 5
VOLTS
3
VOLT
4
INPUT
VOLTAGE 3
6
7
INPUT
VOLTAGE 4
VOLTS
2
20
+ 9
21
10
22
+ 11
23
OUT
6
12
24
VOLT
1
INPUT
VOLTAGE 1
AMP
2
INPUT
CURRENT 2
AMP
3
INPUT
CURRENT 3
XLPC2E4
ONLY
+
OUT
1
OUTPUT 1
0-1 mAdc
+
OUT
2
OUTPUT 2
0-1 mAdc
+
OUT
3
OUTPUT 3
0-1 mAdc
OUTPUT(S) 0-1 mA
INTO 0-10K OHMS LOAD
-014
Phone: 1-800-274-5368
Fax: 585-454-7805
93
92-93
1/9/02, 5:32 PM
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
WIRING DIAGRAMS
WIRING DIAGRAMS
1-Element Watt, Var, Watt/Var with External Aux. Power
1
IA
AMPS
LINE
B
IA
LINE
B
LINE
B
IA
AMPS
IA
AMPS
AMPS
2
3
IC
AMPS
IC
AMPS
EA
VOLTS
E AB
VOLTS
7
8
E CB
EXTERNAL
AUX. POWER
VOLTS
LOAD
LOAD
VAR OUTPUT
WATT
WATT OUTPUT
12
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
10
11
VAR
VAR OUTPUT
+
WATT
WATT OUTPUT
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
OUTPUTS
11
VAR
OUTPUTS
OUTPUTS
9
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
11
VAR
VAR OUTPUT
+
WATT
WATT OUTPUT
12
12
-001
10
AUX. PWR.
10
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
11
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
VAR OUTPUT
VAR
12
13
+
WATT
WATT OUTPUT
14
-003
-004
-001
LINE
B
LINE
B
LINE
B
C
LINE
B C
IA
AMPS
AMPS
IA
AMPS
IA
AMPS
2
3
3
AMPS
AMPS
AMPS
IB
AMPS
IC
E AC
VOLTS
VOLTS
E AN
VOLTS
LOAD
EXTERNAL
AUX. POWER
10
11
VAR OUTPUT
VAR
WATT
WATT OUTPUT
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
12
OUTPUTS
OUTPUTS
9
10
11
VAR
VAR OUTPUT
+
WATT
WATT OUTPUT
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
12
-002
VOLTS
10
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
-005
VAR OUTPUT
VAR
12
13
WATT OUTPUT
LOAD
+
+
WATT OUTPUT
WATT
15
16
17
18
19
20
21
10
22
11
23
12
24
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
EXTERNAL
AUX. POWER
ECN
LOAD
11
14
EAN
E CN
VOLTS
VOLTS
IC
AUX. PWR.
LOAD
AMPS
OUTPUTS
E AC
IC
6
13
IB
5
AMPS
1
IA
IC
XLP Plug-In
10
EXTERNAL
AUX. POWER
LOAD
E CB
VOLTS
LOAD
AUX. PWR.
E AB
6
VOLTS
OUTPUTS
EA
VOLTS
VAR OUTPUT
-011
14
-002
Phone: 1-800-274-5368
Fax: 585-454-7805
94
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
95
94-95
1/9/02, 5:32 PM
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
WIRING DIAGRAMS
WIRING DIAGRAMS
1-Element Watt, Var, Watt/Var with External Aux. Power
1
IA
AMPS
LINE
B
IA
LINE
B
LINE
B
IA
AMPS
IA
AMPS
AMPS
2
3
IC
AMPS
IC
AMPS
EA
VOLTS
E AB
VOLTS
7
8
E CB
EXTERNAL
AUX. POWER
VOLTS
LOAD
LOAD
VAR OUTPUT
WATT
WATT OUTPUT
12
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
10
11
VAR
VAR OUTPUT
+
WATT
WATT OUTPUT
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
OUTPUTS
11
VAR
OUTPUTS
OUTPUTS
9
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
11
VAR
VAR OUTPUT
+
WATT
WATT OUTPUT
12
12
-001
10
AUX. PWR.
10
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
11
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
VAR OUTPUT
VAR
12
13
+
WATT
WATT OUTPUT
14
-003
-004
-001
LINE
B
LINE
B
LINE
B
C
LINE
B C
IA
AMPS
AMPS
IA
AMPS
IA
AMPS
2
3
3
AMPS
AMPS
AMPS
IB
AMPS
IC
E AC
VOLTS
VOLTS
E AN
VOLTS
LOAD
EXTERNAL
AUX. POWER
10
11
VAR OUTPUT
VAR
WATT
WATT OUTPUT
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
12
OUTPUTS
OUTPUTS
9
10
11
VAR
VAR OUTPUT
+
WATT
WATT OUTPUT
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
12
-002
VOLTS
10
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
-005
VAR OUTPUT
VAR
12
13
WATT OUTPUT
LOAD
+
+
WATT OUTPUT
WATT
15
16
17
18
19
20
21
10
22
11
23
12
24
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
EXTERNAL
AUX. POWER
ECN
LOAD
11
14
EAN
E CN
VOLTS
VOLTS
IC
AUX. PWR.
LOAD
AMPS
OUTPUTS
E AC
IC
6
13
IB
5
AMPS
1
IA
IC
XLP Plug-In
10
EXTERNAL
AUX. POWER
LOAD
E CB
VOLTS
LOAD
AUX. PWR.
E AB
6
VOLTS
OUTPUTS
EA
VOLTS
VAR OUTPUT
-011
14
-002
Phone: 1-800-274-5368
Fax: 585-454-7805
94
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
95
94-95
1/9/02, 5:32 PM
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
WIRING DIAGRAMS
WIRING DIAGRAMS
3-Element Watt, Var, Watt/Var with External Aux. Power
LINE
C
IA
AMPS
AMPS
IB
AMPS
13
14
15
E1A
16
17
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
IC
AMPS
AMPS
6
7
EA
EB
EC
VOLTS
VOLTS
VOLTS
VOLTS
VOLTS
10
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
13
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
WATT OUTPUT
18
EA
19
EB
20
21
VOLTS
OUTPUTS
12
+
+
WATT
WATT OUTPUT
LOAD
LINE
VOLTS
10
22
11
23
AMPS
8
9
24
LA
VOLTS
LB
LA
E 2A
VOLTS
+
CH. 2
CHANNEL 2 OUTPUT
12
LB
LA
E 2B
VOLTS
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-1250 OHMS
LB
C
H
A
N
N
E
L
2
+
CH. 1
CHANNEL 1 OUTPUT
10
11
CH. 2
C
H
A
N
N
E
L
SYSTEM B
12
-012
-012
SYSTEM A
OUTPUT
0 to + 1 mA
1-3-5 mA
4-12-20 mA
SYSTEM B
10
+
CHANNEL 1 OUTPUT
SYSTEM A
LB
E1B
LOAD
CH. 1
11
VOLTS
C
H
A
N
N
E
L
5
E 2A
LA
E1A
EXTERNAL
AUX. POWER
12
14
AMPS
I 2A
VAR OUTPUT
LOAD
3
I 1A
CHANNEL 2 OUTPUT
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-1250 OHMS
-011
-003
Three 1-Element Watt/Vars in One Module with or without External Aux. Power
A
LINE
B C
XLP Plug-In
VAR OUTPUT
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
N
VAR
LOAD
IC
EC
11
VOLTS
IB
C
H
A
N
N
E
L
LINE
1
IA
3
AMPS
OUTPUTS
LINE
B C
OUTPUTS
1
1
AMPS
AMPS
VOLTS
AMPS
VOLTS
14
15
16
17
18
19
20
IB
EC
N
22
11
23
LOAD
12
24
VAR B
OUTPUT
WATT B
OUTPUT
O
U
T
P
U
T
S
6
RTD2
RTD2
7
8
COM
COM
VAR C
OUTPUT
+
+
WC
EXTERNAL
AUX. POWER
(opt.)
RTD1
+
+
VC
10
RTD1
COM
WB
21
WATT A
OUTPUT
O
U
T
P
U
T
S
COM
VB
VAR A
OUTPUT
+
+
WA
IC
EA
COM
VA
IA
EB
VOLTS
13
WATT C
OUTPUT
O
U
T
P
U
T
S
OUTPUT
0-1 mA
1-5 mA
4-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-1250 OHMS
CHANNEL 1 OUTPUT
*
10
11
CHANNEL 2 OUTPUT
*
12
COM
-015
EXTERNAL
AUX. POWER
OUTPUT(S) 0 to + 1 mA
INTO 0-5K OHMS LOAD
+
CH. 1
OUT
+
CH. 2
OUT
13
AUX. PWR.
14
-004
Phone: 1-800-274-5368
Fax: 585-454-7805
96
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
97
96-97
1/9/02, 5:32 PM
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
Wiring Diagrams
Exceltronic XLP Modular
Plug-In Transducers
WIRING DIAGRAMS
WIRING DIAGRAMS
3-Element Watt, Var, Watt/Var with External Aux. Power
LINE
C
IA
AMPS
AMPS
IB
AMPS
13
14
15
E1A
16
17
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
IC
AMPS
AMPS
6
7
EA
EB
EC
VOLTS
VOLTS
VOLTS
VOLTS
VOLTS
10
OUTPUT
0 to + 1 mA
1-5 mA
1-3-5 mA
4-20 mA
4-12-20 mA
13
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
WATT OUTPUT
18
EA
19
EB
20
21
VOLTS
OUTPUTS
12
+
+
WATT
WATT OUTPUT
LOAD
LINE
VOLTS
10
22
11
23
AMPS
8
9
24
LA
VOLTS
LB
LA
E 2A
VOLTS
+
CH. 2
CHANNEL 2 OUTPUT
12
LB
LA
E 2B
VOLTS
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-1250 OHMS
LB
C
H
A
N
N
E
L
2
+
CH. 1
CHANNEL 1 OUTPUT
10
11
CH. 2
C
H
A
N
N
E
L
SYSTEM B
12
-012
-012
SYSTEM A
OUTPUT
0 to + 1 mA
1-3-5 mA
4-12-20 mA
SYSTEM B
10
+
CHANNEL 1 OUTPUT
SYSTEM A
LB
E1B
LOAD
CH. 1
11
VOLTS
C
H
A
N
N
E
L
5
E 2A
LA
E1A
EXTERNAL
AUX. POWER
12
14
AMPS
I 2A
VAR OUTPUT
LOAD
3
I 1A
CHANNEL 2 OUTPUT
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-1250 OHMS
-011
-003
Three 1-Element Watt/Vars in One Module with or without External Aux. Power
A
LINE
B C
XLP Plug-In
VAR OUTPUT
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-5K OHMS
0-1250 OHMS
0-1250 OHMS
N
VAR
LOAD
IC
EC
11
VOLTS
IB
C
H
A
N
N
E
L
LINE
1
IA
3
AMPS
OUTPUTS
LINE
B C
OUTPUTS
1
1
AMPS
AMPS
VOLTS
AMPS
VOLTS
14
15
16
17
18
19
20
IB
EC
N
22
11
23
LOAD
12
24
VAR B
OUTPUT
WATT B
OUTPUT
O
U
T
P
U
T
S
6
RTD2
RTD2
7
8
COM
COM
VAR C
OUTPUT
+
+
WC
EXTERNAL
AUX. POWER
(opt.)
RTD1
+
+
VC
10
RTD1
COM
WB
21
WATT A
OUTPUT
O
U
T
P
U
T
S
COM
VB
VAR A
OUTPUT
+
+
WA
IC
EA
COM
VA
IA
EB
VOLTS
13
WATT C
OUTPUT
O
U
T
P
U
T
S
OUTPUT
0-1 mA
1-5 mA
4-20 mA
LOAD RANGE
0-10K OHMS
0-5K OHMS
0-1250 OHMS
CHANNEL 1 OUTPUT
*
10
11
CHANNEL 2 OUTPUT
*
12
COM
-015
EXTERNAL
AUX. POWER
OUTPUT(S) 0 to + 1 mA
INTO 0-5K OHMS LOAD
+
CH. 1
OUT
+
CH. 2
OUT
13
AUX. PWR.
14
-004
Phone: 1-800-274-5368
Fax: 585-454-7805
96
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
97
96-97
1/9/02, 5:32 PM
SCIENTIFIC
Exceltronic II XLG AC Transducers
COLUMBUS
Test Equipment
Exceltronic XLP Modular
Plug-In Transducers
Process control
0 to 1 mAdc
UL Recognized
Generating stations
420 mAdc
SCADA
41220 mAdc
Isolated outputs on
combined watt/var units
Substation monitoring
Unidirectional &
bidirectional outputs
on combination watt/var
units
Features
Applications
Phone: 1-800-274-5368
Fax: 585-454-7805
98
SCI Transducer Cat 90-134(MTD)
XLG
Outputs
Phone: 1-800-274-5368
Fax: 585-454-7805
99
98-99
1/9/02, 5:33 PM
SCIENTIFIC
Exceltronic II XLG AC Transducers
COLUMBUS
Test Equipment
Exceltronic XLP Modular
Plug-In Transducers
Process control
0 to 1 mAdc
UL Recognized
Generating stations
420 mAdc
SCADA
41220 mAdc
Isolated outputs on
combined watt/var units
Substation monitoring
Unidirectional &
bidirectional outputs
on combination watt/var
units
Features
Applications
Phone: 1-800-274-5368
Fax: 585-454-7805
98
SCI Transducer Cat 90-134(MTD)
XLG
Outputs
Phone: 1-800-274-5368
Fax: 585-454-7805
99
98-99
1/9/02, 5:33 PM
Specifications
Exceltronic II XLG AC Average-Sensing
Current or Voltage Transducers
ORDERING PROCEDURE
Specifications
Option A
5A
05 A
07.5 A
15 A
250 A
0.25 VA (maximum) at 5 A
Option D
10 A
010 A
015 A
20 A
250 A
0.35 VA (maximum) at 10 A
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
N/A
Option 3
240 V
0300 V
0300 V
300 V
2.2 VA (maximum) at 120 V
None Required
85150 Vac
50500 Hz
2.5 VA (maximum) at 120 V
None Required
85150 Vac
50500 Hz
2.5 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
20 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
20 mAdc for
Standard Calibration
N/A
0.0075% / C (typical)
- 0.015% / C (typical)
10
1
EXAMPLE: XLGV10S1-1
Voltage Transducer, 1 element,
self-powered (internal auxiliary
power), 0-1 mAdc output, 120 V input.
Elements
10 = 1 Element (single)
30 = 3 Element (triple)
Auxiliary Power
S = Self-Powered (internal auxiliary power)0-1 mAdc units only
E = External Auxiliary Power (120 Vac std.)4-20 mAdc units only
Output
1 = 0-1 mAdc
4 = 4-20 mAdc (unidirectional)
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
15 Vdc
10 Vdc
15 Vdc
Current Units
Voltage Units
A=5A
D = 10 A
1 = 120 V
3 = 240 V
< 0.5% RO
Response Time
Gain
Zero
10% of Reading (minimum) 20% of Reading (minimum) 10% of Reading (minimum) 20% of Reading (minimum)
None Required
5% of Zero Point (minimum)
None Required
5% of Zero Point (minimum)
Frequency Range
4862 Hz
Operating Humidity
095% Noncondensing
Complete
(Input/Output/Case)
Isolation
Dielectric Withstand
Complete
(Input/Output/Power/Case)
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Single
Triple
Approximate
Dimensions
(excluding
mounting plate)
Single
3.07"
(77.98 mm)
3.50"
(88.90 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
1.14"
(28.96 mm)
.75"
(19.05 mm)
2.00"
(50.80 mm)
.094" RAD.
(2.39 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.75"
(120.65 mm)
5.25"
(133.35 mm)
Phone: 1-800-274-5368
Fax: 585-454-7805
100
4.15"
(105.41 mm)
.23"
(5.84 mm)
3.77"
(95.76 mm)
4.40"
(111.76 mm)
.07"
(1.78 mm)
3.53"
(89.66 mm)
4.00"
(101.60 mm)
Triple
.75"
(19.05 mm)
.094" RAD.
(2.39 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
ANSI/IEEE C37.90.1-1989
Maximum
Net Weight
.25"
(6.35 mm)
.23"
(5.84 mm)
.25"
(6.35 mm)
2500 VRMS at 60 Hz
Surge Withstand
XLG
-20 C to +60 C
XLG
Input
0.2% RO
Option 1
120 V
0150 V
0150 V
180 V
2.2 VA (maximum) at 120 V
Accuracy
Standard Calibration
Adjustments
01 mAdc Volts
(Voltage Transducer)
1.50"
(38.10 mm)
Voltage
Input
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
2.05"
(52.07 mm)
Current
Input
01 mAdc Amps
(Current Transducer)
.07"
(1.78 mm)
Terminal strips shown for illustration purposes only. For exact terminalstrip configuration on specific units, see connection diagrams on page 98.
Drawings not to scale.
Phone: 1-800-274-5368
Fax: 585-454-7805
101
100-101
1/9/02, 5:33 PM
Specifications
Exceltronic II XLG AC Average-Sensing
Current or Voltage Transducers
ORDERING PROCEDURE
Specifications
Option A
5A
05 A
07.5 A
15 A
250 A
0.25 VA (maximum) at 5 A
Option D
10 A
010 A
015 A
20 A
250 A
0.35 VA (maximum) at 10 A
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Burden/Element
N/A
Option 3
240 V
0300 V
0300 V
300 V
2.2 VA (maximum) at 120 V
None Required
85150 Vac
50500 Hz
2.5 VA (maximum) at 120 V
None Required
85150 Vac
50500 Hz
2.5 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
20 mAdc for
Standard Calibration
1 mAdc for
Standard Calibration
20 mAdc for
Standard Calibration
N/A
0.0075% / C (typical)
- 0.015% / C (typical)
10
1
EXAMPLE: XLGV10S1-1
Voltage Transducer, 1 element,
self-powered (internal auxiliary
power), 0-1 mAdc output, 120 V input.
Elements
10 = 1 Element (single)
30 = 3 Element (triple)
Auxiliary Power
S = Self-Powered (internal auxiliary power)0-1 mAdc units only
E = External Auxiliary Power (120 Vac std.)4-20 mAdc units only
Output
1 = 0-1 mAdc
4 = 4-20 mAdc (unidirectional)
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
15 Vdc
10 Vdc
15 Vdc
Current Units
Voltage Units
A=5A
D = 10 A
1 = 120 V
3 = 240 V
< 0.5% RO
Response Time
Gain
Zero
10% of Reading (minimum) 20% of Reading (minimum) 10% of Reading (minimum) 20% of Reading (minimum)
None Required
5% of Zero Point (minimum)
None Required
5% of Zero Point (minimum)
Frequency Range
4862 Hz
Operating Humidity
095% Noncondensing
Complete
(Input/Output/Case)
Isolation
Dielectric Withstand
Complete
(Input/Output/Power/Case)
Complete
(Input/Output/Case)
Complete
(Input/Output/Power/Case)
Single
Triple
Approximate
Dimensions
(excluding
mounting plate)
Single
3.07"
(77.98 mm)
3.50"
(88.90 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
1.14"
(28.96 mm)
.75"
(19.05 mm)
2.00"
(50.80 mm)
.094" RAD.
(2.39 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.75"
(120.65 mm)
5.25"
(133.35 mm)
Phone: 1-800-274-5368
Fax: 585-454-7805
100
4.15"
(105.41 mm)
.23"
(5.84 mm)
3.77"
(95.76 mm)
4.40"
(111.76 mm)
.07"
(1.78 mm)
3.53"
(89.66 mm)
4.00"
(101.60 mm)
Triple
.75"
(19.05 mm)
.094" RAD.
(2.39 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
ANSI/IEEE C37.90.1-1989
Maximum
Net Weight
.25"
(6.35 mm)
.23"
(5.84 mm)
.25"
(6.35 mm)
2500 VRMS at 60 Hz
Surge Withstand
XLG
-20 C to +60 C
XLG
Input
0.2% RO
Option 1
120 V
0150 V
0150 V
180 V
2.2 VA (maximum) at 120 V
Accuracy
Standard Calibration
Adjustments
01 mAdc Volts
(Voltage Transducer)
1.50"
(38.10 mm)
Voltage
Input
Nominal
Calibrating Range
Range with Linearity
Overload Continuous
Overload 1 Second/Hour
Burden/Element
2.05"
(52.07 mm)
Current
Input
01 mAdc Amps
(Current Transducer)
.07"
(1.78 mm)
Terminal strips shown for illustration purposes only. For exact terminalstrip configuration on specific units, see connection diagrams on page 98.
Drawings not to scale.
Phone: 1-800-274-5368
Fax: 585-454-7805
101
100-101
1/9/02, 5:33 PM
Wiring Diagrams
Exceltronic II XLG AC Average-Sensing
Current or Voltage Transducers
Specifications
Exceltronic II XLG
AC Watt or Var Transducers
WIRING DIAGRAMS FOR 0-1 mAdc AND 4-20 mAdc UNITS (Styles III & II Cases)
Specifications
AO
CO
- + - + - +
1
Voltage
Input
Nominal
Range*
Overload Continuous
Burden/Element
11
10
CO
AC
INPUT
AC
INPUT
85150 Vac
50500 Hz
4 VA (maximum) at 120 V
85150 Vac
50500 Hz
4.5 VA (maximum) at 120 V
0.005% / C (typical)
0.0075% / C (typical)
0.0075% / C (typical)
0.008% / C (typical)
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
15 Vdc
10 Vdc
15 Vdc
Compliance Voltage
< 0.5% RO
Gain
Zero
Frequency Range
5862 Hz
60 Hz
0.25% RO, Noncumulative
095% Noncondensing
Operating Humidity
Isolation
Complete (Input/Output/Power/Case)
2500 VRMS at 60 Hz
Dielectric Withstand
AO
EXTERNAL
AUX. POWER
AC
INPUT
BO
Surge Withstand
CO
- + - + - +
Approximate Dimensions
(excluding mounting plate)
DC
OUTPUT
1
4
6A
EXTERNAL
AUX. POWER
10
11
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
ANSI/IEEE C37.90.1-1989
DC
DC
DC
OUTPUT OUTPUT OUTPUT
0.2% RO (maximum)
PF Effect on Accuracy
Standard Calibration
Adjustments
XLG
BO
AC
INPUT
120 V
0150 V
180 V
0.035 VA (maximum) at 120 V
20 mAdc for
Standard Calibration
Load
AO
5A
010 A
15 A
250 A
0.3 VA (maximum) at 5 A
1 mAdc for
Standard Calibration
Accuracy
12
20 mAdc for
Standard Calibration
0 to 1 mAdc Vars
(Var Transducer)
1 mAdc for
Standard Calibration
Nominal
Range*
Overload Continuous
Overload 1 Second/Hour
Burden/Element
DC
DC
DC
OUTPUT OUTPUT OUTPUT
AC
INPUT
DC
OUTPUT
BO
Current
Input
0 to 1 mAdc Watts
(Watt Transducer)
*Total input not to exceed 200% of standard-calibration watts or vars on units with 0 to 1 mAdc output.
Total input not to exceed 120% of standard-calibration watts or vars on units with 420 mAdc output.
12 12A
AO
BO
CO
AC
INPUT
AC
INPUT
AC
INPUT
Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Fax: 585-454-7805
102
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
103
102-103
1/9/02, 5:33 PM
Wiring Diagrams
Exceltronic II XLG AC Average-Sensing
Current or Voltage Transducers
Specifications
Exceltronic II XLG
AC Watt or Var Transducers
WIRING DIAGRAMS FOR 0-1 mAdc AND 4-20 mAdc UNITS (Styles III & II Cases)
Specifications
AO
CO
- + - + - +
1
Voltage
Input
Nominal
Range*
Overload Continuous
Burden/Element
11
10
CO
AC
INPUT
AC
INPUT
85150 Vac
50500 Hz
4 VA (maximum) at 120 V
85150 Vac
50500 Hz
4.5 VA (maximum) at 120 V
0.005% / C (typical)
0.0075% / C (typical)
0.0075% / C (typical)
0.008% / C (typical)
-20 C to +70 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
10 Vdc
15 Vdc
10 Vdc
15 Vdc
Compliance Voltage
< 0.5% RO
Gain
Zero
Frequency Range
5862 Hz
60 Hz
0.25% RO, Noncumulative
095% Noncondensing
Operating Humidity
Isolation
Complete (Input/Output/Power/Case)
2500 VRMS at 60 Hz
Dielectric Withstand
AO
EXTERNAL
AUX. POWER
AC
INPUT
BO
Surge Withstand
CO
- + - + - +
Approximate Dimensions
(excluding mounting plate)
DC
OUTPUT
1
4
6A
EXTERNAL
AUX. POWER
10
11
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
ANSI/IEEE C37.90.1-1989
DC
DC
DC
OUTPUT OUTPUT OUTPUT
0.2% RO (maximum)
PF Effect on Accuracy
Standard Calibration
Adjustments
XLG
BO
AC
INPUT
120 V
0150 V
180 V
0.035 VA (maximum) at 120 V
20 mAdc for
Standard Calibration
Load
AO
5A
010 A
15 A
250 A
0.3 VA (maximum) at 5 A
1 mAdc for
Standard Calibration
Accuracy
12
20 mAdc for
Standard Calibration
0 to 1 mAdc Vars
(Var Transducer)
1 mAdc for
Standard Calibration
Nominal
Range*
Overload Continuous
Overload 1 Second/Hour
Burden/Element
DC
DC
DC
OUTPUT OUTPUT OUTPUT
AC
INPUT
DC
OUTPUT
BO
Current
Input
0 to 1 mAdc Watts
(Watt Transducer)
*Total input not to exceed 200% of standard-calibration watts or vars on units with 0 to 1 mAdc output.
Total input not to exceed 120% of standard-calibration watts or vars on units with 420 mAdc output.
12 12A
AO
BO
CO
AC
INPUT
AC
INPUT
AC
INPUT
Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Fax: 585-454-7805
102
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
103
102-103
1/9/02, 5:33 PM
ORDERING PROCEDURE
Wiring Diagrams
Exceltronic II XLG
AC Watt or Var Transducers
WIRING DIAGRAMS FOR 0-1 mAdc AND 4-20 mAdc UNITS (Style II Case)
XLG
20
Transducer Type
W = Watt
R = Reactive (var)
A1 EXAMPLE: XLGW20E4-A1
Watt Transducer, 2 element,
120 Vac external auxiliary
power, 4-20 mAdc output,
5 A/120 V input.
Elements
10 = 1 Element
20 = 2 Element
25 = 21/2 Element
30 = 3 Element
L1
LINE
L1
L2
Output
1 = 0-1 mAdc
4 = 4-20 mAdc (unidirectional)
12 = 4-12-20 mAdc (bidirectional)
L3
DC
OUTPUT
DC
OUTPUT
Auxiliary Power
S = Self-Powered (internal auxiliary power)
E = External Auxiliary Power (120 Vac std.)
LINE
L2
10
11
12
10
11
12
LOAD
Input
A=5A
1 = 120 V
EXTERNAL
AUX. POWER
LOAD
XLG
Option
5 = 50 Hz (not UL Recognized)
EXTERNAL
AUX. POWER
1.14"
(28.96 mm)
DC
OUTPUT
.75"
(19.05 mm)
6A
2.00"
(50.80 mm)
4.15"
(105.41 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
LINE
L2
L3
6A
EXT.
AUX.
POWER
.23"
(5.84 mm)
1.50"
(38.10 mm)
L1
N
DC
OUTPUT
.094" RAD.
(2.39 mm)
3.77"
(95.76 mm)
LINE
L2
L3
10
11
EXT.
AUX.
POWER
12 12A
10
11
12 12A
LOAD
LOAD
.07"
(1.78 mm)
4.75"
(120.65 mm)
5.25"
(133.35 mm)
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams on page 101.
Drawings not to scale.
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
104
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
105
104-105
1/9/02, 5:33 PM
ORDERING PROCEDURE
Wiring Diagrams
Exceltronic II XLG
AC Watt or Var Transducers
WIRING DIAGRAMS FOR 0-1 mAdc AND 4-20 mAdc UNITS (Style II Case)
XLG
20
Transducer Type
W = Watt
R = Reactive (var)
A1 EXAMPLE: XLGW20E4-A1
Watt Transducer, 2 element,
120 Vac external auxiliary
power, 4-20 mAdc output,
5 A/120 V input.
Elements
10 = 1 Element
20 = 2 Element
25 = 21/2 Element
30 = 3 Element
L1
LINE
L1
L2
Output
1 = 0-1 mAdc
4 = 4-20 mAdc (unidirectional)
12 = 4-12-20 mAdc (bidirectional)
L3
DC
OUTPUT
DC
OUTPUT
Auxiliary Power
S = Self-Powered (internal auxiliary power)
E = External Auxiliary Power (120 Vac std.)
LINE
L2
10
11
12
10
11
12
LOAD
Input
A=5A
1 = 120 V
EXTERNAL
AUX. POWER
LOAD
XLG
Option
5 = 50 Hz (not UL Recognized)
EXTERNAL
AUX. POWER
1.14"
(28.96 mm)
DC
OUTPUT
.75"
(19.05 mm)
6A
2.00"
(50.80 mm)
4.15"
(105.41 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
LINE
L2
L3
6A
EXT.
AUX.
POWER
.23"
(5.84 mm)
1.50"
(38.10 mm)
L1
N
DC
OUTPUT
.094" RAD.
(2.39 mm)
3.77"
(95.76 mm)
LINE
L2
L3
10
11
EXT.
AUX.
POWER
12 12A
10
11
12 12A
LOAD
LOAD
.07"
(1.78 mm)
4.75"
(120.65 mm)
5.25"
(133.35 mm)
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams on page 101.
Drawings not to scale.
Adjust
Phone: 1-800-274-5368
Fax: 585-454-7805
104
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
105
104-105
1/9/02, 5:33 PM
Specifications
Exceltronic II XLG Combined
AC Watt/Var Transducers
ORDERING PROCEDURE
0 to 1 mAdc Watts
(Combined Watt/Var
Transducer)
Specifications
Voltage
Input
Nominal
Range*
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
15 A
250 A
0.3 VA (maximum) at 5 A
Nominal
Range*
Overload Continuous
Burden/Element
120 V
0150 V
180 V
0.035 VA (maximum) at 120 V
85150 Vac
50500 Hz
8 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
20 mAdc for
Standard Calibration
0.005% / C (typical)
0.0075% / C (typical)
0.0075% / C (typical)
0.008% / C (typical)
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Load
15 Vdc
10 Vdc
15 Vdc
< 0.5% RO
Response Time
0.2% RO (maximum)
PF Effect on Accuracy
Standard Calibration
Adjustments
Any
Power Factor
Gain
Zero
Frequency
30
A1 -
N
EXAMPLE: XLGC30E1-A1-N
Combined Watt/Var Transducer,
3 element, 120 Vac external
auxiliary power, 0-1 mAdc output,
5 A/120 V input, nonisolated.
Auxiliary Power
S = Self-Powered (internal auxiliary power)
E = External Auxiliary Power (120 Vac std.)
Output
1 = 0-1 mAdc
4 = 4-20 mAdc (unidirectional)
12 = 4-12-20 mAdc (bidirectional)
15 = 4-20 mAdc Unidirectional (watts)/4-12-20 mAdc Bidirectional (vars)
Input
A=5A
1 = 120 V
XLG
10 Vdc
Any load from 010,000
at 1 mAdc
Elements
10 = 1 Element
20 = 2 Element
25 = 21/2 Element
30 = 3 Element
20 mAdc for
Standard Calibration
Accuracy
XLG
Transducer Type
C = Combined Watt/Var
1 mAdc for
Standard Calibration
Options
N = Nonisolated Outputs
5 = 50 Hz (not UL Recognized)
60 Hz
0.25% RO, Noncumulative
095% Noncondensing
Isolation
Complete (Input/Output/Power/Case)
Dielectric Withstand
2500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1-1989
1.14"
(28.96 mm)
Approximate Dimensions
(excluding mounting plate)
4.4" W x 3.9" D x 6.5" H (112 mm x 99 mm x 165 mm) Style IV Case, see page 123
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
.75"
(19.05 mm)
.094" RAD.
(2.39 mm)
2.00"
(50.80 mm)
Current
Input
0 to 1 mAdc Vars
(Combined Watt/Var
Transducer)
.23"
(5.84 mm)
3.77"
(95.76 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
5.78"
(146.81 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
4.75"
(120.65 mm)
.07"
(1.78 mm)
5.25"
(133.35 mm)
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams on page 104.
Drawings not to scale.
Phone: 1-800-274-5368
Fax: 585-454-7805
106
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
107
106-107
1/9/02, 5:33 PM
Specifications
Exceltronic II XLG Combined
AC Watt/Var Transducers
ORDERING PROCEDURE
0 to 1 mAdc Watts
(Combined Watt/Var
Transducer)
Specifications
Voltage
Input
Nominal
Range*
Overload Continuous
Overload 1 Second/Hour
Burden/Element
5A
010 A
15 A
250 A
0.3 VA (maximum) at 5 A
Nominal
Range*
Overload Continuous
Burden/Element
120 V
0150 V
180 V
0.035 VA (maximum) at 120 V
85150 Vac
50500 Hz
8 VA (maximum) at 120 V
1 mAdc for
Standard Calibration
20 mAdc for
Standard Calibration
0.005% / C (typical)
0.0075% / C (typical)
0.0075% / C (typical)
0.008% / C (typical)
-20 C to +60 C
-20 C to +50 C
-20 C to +60 C
-20 C to +50 C
Compliance Voltage
Load
15 Vdc
10 Vdc
15 Vdc
< 0.5% RO
Response Time
0.2% RO (maximum)
PF Effect on Accuracy
Standard Calibration
Adjustments
Any
Power Factor
Gain
Zero
Frequency
30
A1 -
N
EXAMPLE: XLGC30E1-A1-N
Combined Watt/Var Transducer,
3 element, 120 Vac external
auxiliary power, 0-1 mAdc output,
5 A/120 V input, nonisolated.
Auxiliary Power
S = Self-Powered (internal auxiliary power)
E = External Auxiliary Power (120 Vac std.)
Output
1 = 0-1 mAdc
4 = 4-20 mAdc (unidirectional)
12 = 4-12-20 mAdc (bidirectional)
15 = 4-20 mAdc Unidirectional (watts)/4-12-20 mAdc Bidirectional (vars)
Input
A=5A
1 = 120 V
XLG
10 Vdc
Any load from 010,000
at 1 mAdc
Elements
10 = 1 Element
20 = 2 Element
25 = 21/2 Element
30 = 3 Element
20 mAdc for
Standard Calibration
Accuracy
XLG
Transducer Type
C = Combined Watt/Var
1 mAdc for
Standard Calibration
Options
N = Nonisolated Outputs
5 = 50 Hz (not UL Recognized)
60 Hz
0.25% RO, Noncumulative
095% Noncondensing
Isolation
Complete (Input/Output/Power/Case)
Dielectric Withstand
2500 VRMS at 60 Hz
Surge Withstand
ANSI/IEEE C37.90.1-1989
1.14"
(28.96 mm)
Approximate Dimensions
(excluding mounting plate)
4.4" W x 3.9" D x 6.5" H (112 mm x 99 mm x 165 mm) Style IV Case, see page 123
5001000 Watts/Element
500600 Watts/Element
5001000 Vars/Element
500600 Vars/Element
.75"
(19.05 mm)
.094" RAD.
(2.39 mm)
2.00"
(50.80 mm)
Current
Input
0 to 1 mAdc Vars
(Combined Watt/Var
Transducer)
.23"
(5.84 mm)
3.77"
(95.76 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
5.78"
(146.81 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
4.75"
(120.65 mm)
.07"
(1.78 mm)
5.25"
(133.35 mm)
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams on page 104.
Drawings not to scale.
Phone: 1-800-274-5368
Fax: 585-454-7805
106
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
107
106-107
1/9/02, 5:33 PM
Wiring Diagrams
Exceltronic II XLG Combined
AC Watt/Var Transducers
How Accurate
is your Cash
Register?
WIRING DIAGRAMS FOR 0-1 mAdc AND 4-20 mAdc ISOLATED UNITS (Style IV Case)
Nonisolated units have the same connections as the Exceltronic Combined Watt/Var Transducers on page 48.
L1
LINE
L1
L2
DC
OUTPUT
WATT
6A
6A
EXTERNAL
AUX. POWER
10
11
EXTERNAL
AUX. POWER
12 12A
DC
OUTPUT
VAR
12 12A
JemStar is the metering solution for the new era of deregulation. At a time when old metering
standards just wont do, JemStar provides accuracy you can take to the bank. Put profit and
loss control at your fingertips. A powerful meter, that exceeds industry standards, JEMSTAR
is the new cash register for the industry. Accurate
monitoring provides more data, and it allows you to
provide customers with additional services and information. JEMSTAR can help turn your profits around.
LOAD
LINE
L2
L3
6A 6B
L1
DC
OUTPUT
WATT
11
DC
OUTPUT
VAR
10
LINE
L2
L3
+
1
1-888-880-JEM1
4
6A 6B
EXT.
AUX.
POWER
Simply Powerful
EXT.
AUX.
POWER
SCIENTIFIC COLUMBUS
Contact Inputs
(2) Channels Programmable
for Pulse counter, Demand
Synchronization, Status Input
or TOU Rate Override.
10 11 12 12A 12B
Graphical Display
10 11 12 12A 12B
LOAD
DC
OUTPUT
VAR
DC
OUTPUT
VAR
LOAD
Registers:
Instantaneous, Consumption, Demand (Sliding &
Fixed), Time of Peak, Average Power Factor,
Coincident Demand, Coincident Power Factor,
Cumulative Demand, Continuous Cumulative
Demand,
Simultaneous Communications
I/R Port, RS-232, RS-485, Modem
Instrumentation
L1
DC
OUTPUT
WATT
LOAD
L3
DC
OUTPUT
WATT
LINE
L2
Auto-ranging Voltage:
55-530 VAC
Site Diagnostics include
installation verification and
on-going monitoring.
www.rochester.com
E Models: Shown. S Models: External aux. power not required.
Adjust
NOTE: Dynamic separation between the two analog outputs is limited to 10 Vdc (15 Vdc separation on E1 & S1 units).
Phone: 1-800-274-5368
Headquarters
50 Fordham Road
Wilmington, MA 01887
Tel: 978-988-4101
Fax: 978-988-4179
E-Mail: power.industrial@ametek.com
Fax: 585-454-7805
108
SCI Transducer Cat 90-134(MTD)
108-109
1/9/02, 5:33 PM
109
Wiring Diagrams
Exceltronic II XLG Combined
AC Watt/Var Transducers
How Accurate
is your Cash
Register?
WIRING DIAGRAMS FOR 0-1 mAdc AND 4-20 mAdc ISOLATED UNITS (Style IV Case)
Nonisolated units have the same connections as the Exceltronic Combined Watt/Var Transducers on page 48.
L1
LINE
L1
L2
DC
OUTPUT
WATT
6A
6A
EXTERNAL
AUX. POWER
10
11
EXTERNAL
AUX. POWER
12 12A
DC
OUTPUT
VAR
12 12A
JemStar is the metering solution for the new era of deregulation. At a time when old metering
standards just wont do, JemStar provides accuracy you can take to the bank. Put profit and
loss control at your fingertips. A powerful meter, that exceeds industry standards, JEMSTAR
is the new cash register for the industry. Accurate
monitoring provides more data, and it allows you to
provide customers with additional services and information. JEMSTAR can help turn your profits around.
LOAD
LINE
L2
L3
6A 6B
L1
DC
OUTPUT
WATT
11
DC
OUTPUT
VAR
10
LINE
L2
L3
+
1
1-888-880-JEM1
4
6A 6B
EXT.
AUX.
POWER
Simply Powerful
EXT.
AUX.
POWER
SCIENTIFIC COLUMBUS
Contact Inputs
(2) Channels Programmable
for Pulse counter, Demand
Synchronization, Status Input
or TOU Rate Override.
10 11 12 12A 12B
Graphical Display
10 11 12 12A 12B
LOAD
DC
OUTPUT
VAR
DC
OUTPUT
VAR
LOAD
Registers:
Instantaneous, Consumption, Demand (Sliding &
Fixed), Time of Peak, Average Power Factor,
Coincident Demand, Coincident Power Factor,
Cumulative Demand, Continuous Cumulative
Demand,
Simultaneous Communications
I/R Port, RS-232, RS-485, Modem
Instrumentation
L1
DC
OUTPUT
WATT
LOAD
L3
DC
OUTPUT
WATT
LINE
L2
Auto-ranging Voltage:
55-530 VAC
Site Diagnostics include
installation verification and
on-going monitoring.
www.rochester.com
E Models: Shown. S Models: External aux. power not required.
Adjust
NOTE: Dynamic separation between the two analog outputs is limited to 10 Vdc (15 Vdc separation on E1 & S1 units).
Phone: 1-800-274-5368
Headquarters
50 Fordham Road
Wilmington, MA 01887
Tel: 978-988-4101
Fax: 978-988-4179
E-Mail: power.industrial@ametek.com
Fax: 585-454-7805
108
SCI Transducer Cat 90-134(MTD)
108-109
1/9/02, 5:33 PM
109
SCIENTIFIC
DC Watt Transducers
COLUMBUS
SCIENTIFIC
Specifications, Ordering Procedure,
& Wiring Diagram
COLUMBUS
DC WATT TRANSDUCERS
DC Watt Transducer
Specifications
Current
Input
Nominal
Range
Overload Continuous
Burden
Voltage
Input
Nominal
Range
Overload Continuous
Burden
1001000 Vdc (For input above 600 Vdc, an external multiplier resistance box is supplied.)
Rated Voltage 20%
Rated Voltage + 30%
200 Ohms/Volt Nominal
105130 Vac
60500 Hz
6 VA Nominal
1 mAdc at Nominal Inputs
0 to 1 mAdc
Output Range
0.75% RO
0.5% RO
-20 C to +60 C
Compliance Voltage
10 Vdc
010,000
Load
Output Ripple Peak
Features
Applications
High reliability
DC rail systems
Wide operating
temperature range
DC transmission lines
Long-term stability
Outputs
0 to 1 mAdc
< 0.5% RO
< 400 ms to 99%
Response Time
Standard Calibration
Adjustments
2% of Reading (minimum)
None Required
Gain
Zero
095% Noncondensing
Complete (Input/Output/Power/Case)
Isolation
Dielectric Withstand
Mining
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
(excluding mounting plate)
ORDERING PROCEDURE
Model No.
6268
Please consult the factory if you require any options with the 6268 DC Watt Transducer.
LINE
10
11
12 12A
EXTERNAL
AUX. POWER
Phone: 1-800-274-5368
Fax: 585-454-7805
110
SCI Transducer Cat 90-134(MTD)
Instrumentation
DC Rail Systems
MV
SHUNT
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
111
110-111
1/9/02, 5:33 PM
SCIENTIFIC
DC Watt Transducers
COLUMBUS
SCIENTIFIC
Specifications, Ordering Procedure,
& Wiring Diagram
COLUMBUS
DC WATT TRANSDUCERS
DC Watt Transducer
Specifications
Current
Input
Nominal
Range
Overload Continuous
Burden
Voltage
Input
Nominal
Range
Overload Continuous
Burden
1001000 Vdc (For input above 600 Vdc, an external multiplier resistance box is supplied.)
Rated Voltage 20%
Rated Voltage + 30%
200 Ohms/Volt Nominal
105130 Vac
60500 Hz
6 VA Nominal
1 mAdc at Nominal Inputs
0 to 1 mAdc
Output Range
0.75% RO
0.5% RO
-20 C to +60 C
Compliance Voltage
10 Vdc
010,000
Load
Output Ripple Peak
Features
Applications
High reliability
DC rail systems
Wide operating
temperature range
DC transmission lines
Long-term stability
Outputs
0 to 1 mAdc
< 0.5% RO
< 400 ms to 99%
Response Time
Standard Calibration
Adjustments
2% of Reading (minimum)
None Required
Gain
Zero
095% Noncondensing
Complete (Input/Output/Power/Case)
Isolation
Dielectric Withstand
Mining
Surge Withstand
ANSI/IEEE C37.90.1
Approximate Dimensions
(excluding mounting plate)
ORDERING PROCEDURE
Model No.
6268
Please consult the factory if you require any options with the 6268 DC Watt Transducer.
LINE
10
11
12 12A
EXTERNAL
AUX. POWER
Phone: 1-800-274-5368
Fax: 585-454-7805
110
SCI Transducer Cat 90-134(MTD)
Instrumentation
DC Rail Systems
MV
SHUNT
LOAD
Phone: 1-800-274-5368
Fax: 585-454-7805
111
110-111
1/9/02, 5:33 PM
SCIENTIFIC
DC Voltage Isolation Amplifiers
COLUMBUS
The Model 6271A DC Voltage Isolation Amplifier is a
linear amplifier designed to amplify dc shunted millivolt signals or dc
voltages ranging from 0 50 mV through 0 1000 V, and provide
complete isolation of the input signal.
SCIENTIFIC
Specifications
COLUMBUS
Current
Input
Units
Only
Nominal
Range
Overload Continuous
Impedance
Voltage
Input
Units
Only
Nominal
Ranges Available
Impedance
020 Vdc
211000 Vdc
0 to 1 mAdc
(DC Voltage Isolation Amplifier)
0 to 1 mAdc**
3 mAdc
< 100
0 to 100 mVdc
0 to 50 mVdc thru 0 to 1000 Vdc (customer specified)
5000 Ohms/Volt
1400 Ohms/Volt
108132 Vac
5862 Hz
2 VA Nominal
108132 Vac
5862 Hz
5 VA Nominal
0.5% RO at 25 C
0.7% of Span
0.04% / C
0.05% / C
-10 C to +70 C
-10 C to +50 C
Accuracy
Features
Applications
Outputs
Compliance Voltage
10 Vdc
DC shunt inputs or dc
voltage from 050 mV thru
01000 V
Telemetering
Recording devices
0 to 1 mAdc
15 or 135 mAdc
Response Time
A/D converters
Standard Calibration
Adjustments
010,000
Load
Complete isolation
15% RO (minimum)
1% RO (minimum)
Gain
Zero
Operating Humidity
Filtered output
Isolation
Dielectric Withstand
Maximum Net Weight
Approximate Dimensions
(excluding mounting plate)
095% Noncondensing
Input to
(Output/Power/Case)
Output/Power/Case
Input to
(Output/Power/Case)
Output/Power/Case
4000 Vdc
1500 VRMS at 60 Hz
4000 Vdc
1500 VRMS at 60 Hz
Instrumentation
Off-the-shelf electronic components are used by a large investorowned utility to measure quasi-direct currents flowing in the neutrals
of key transformers during solar-magnetic storms. The primary aim is
to collect field data confirming the accuracy of recently developed
models of dc current during geomagnetic activity. The geomagnetic
current sensors interface with the utilitys SCADA system, so dispatchers can act accordingly when magnetic activity occurs.
P-Option*
(DC Voltage Isolation Amplifier)
Phone: 1-800-274-5368
Fax: 585-454-7805
112
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
113
112-113
1/9/02, 5:33 PM
SCIENTIFIC
DC Voltage Isolation Amplifiers
COLUMBUS
The Model 6271A DC Voltage Isolation Amplifier is a
linear amplifier designed to amplify dc shunted millivolt signals or dc
voltages ranging from 0 50 mV through 0 1000 V, and provide
complete isolation of the input signal.
SCIENTIFIC
Specifications
COLUMBUS
Current
Input
Units
Only
Nominal
Range
Overload Continuous
Impedance
Voltage
Input
Units
Only
Nominal
Ranges Available
Impedance
020 Vdc
211000 Vdc
0 to 1 mAdc
(DC Voltage Isolation Amplifier)
0 to 1 mAdc**
3 mAdc
< 100
0 to 100 mVdc
0 to 50 mVdc thru 0 to 1000 Vdc (customer specified)
5000 Ohms/Volt
1400 Ohms/Volt
108132 Vac
5862 Hz
2 VA Nominal
108132 Vac
5862 Hz
5 VA Nominal
0.5% RO at 25 C
0.7% of Span
0.04% / C
0.05% / C
-10 C to +70 C
-10 C to +50 C
Accuracy
Features
Applications
Outputs
Compliance Voltage
10 Vdc
DC shunt inputs or dc
voltage from 050 mV thru
01000 V
Telemetering
Recording devices
0 to 1 mAdc
15 or 135 mAdc
Response Time
A/D converters
Standard Calibration
Adjustments
010,000
Load
Complete isolation
15% RO (minimum)
1% RO (minimum)
Gain
Zero
Operating Humidity
Filtered output
Isolation
Dielectric Withstand
Maximum Net Weight
Approximate Dimensions
(excluding mounting plate)
095% Noncondensing
Input to
(Output/Power/Case)
Output/Power/Case
Input to
(Output/Power/Case)
Output/Power/Case
4000 Vdc
1500 VRMS at 60 Hz
4000 Vdc
1500 VRMS at 60 Hz
Instrumentation
Off-the-shelf electronic components are used by a large investorowned utility to measure quasi-direct currents flowing in the neutrals
of key transformers during solar-magnetic storms. The primary aim is
to collect field data confirming the accuracy of recently developed
models of dc current during geomagnetic activity. The geomagnetic
current sensors interface with the utilitys SCADA system, so dispatchers can act accordingly when magnetic activity occurs.
P-Option*
(DC Voltage Isolation Amplifier)
Phone: 1-800-274-5368
Fax: 585-454-7805
112
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
113
112-113
1/9/02, 5:33 PM
Ordering Procedure
DC Voltage Isolation Amplifiers
Ordering Procedure
DC Voltage Isolation Amplifiers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
-RS*
Output
Scaling
Resistor
Option #1
Table 1
Table 2
Table 3
0 to 1 mAdc
output
Option
#2
Input
Table 4
Table 5
External
Auxiliary
Power
6271
PAN7
-SM
Specify
output
voltage
100 mVdc
Option
-24
-SM
-Z
EXAMPLES:
6271A
P-Option
outputs
Description
Scaling Resistor
Description
24 Vdc Loop-Powered (PA7 and PA7-B models only)
(consult factory for specifications)
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units, except PAN-B
models)
6271A-RS-SM-100 mVdc
0 to 1 mAdc output DC Voltage Isolation Amplifier, resistor scaling (converts current output to voltage output),
seismic brace, 0 to 100 mVdc (std.) input calibration.
6271PAN7-RS-SM-100 mVdc
4-20 mAdc output DC Voltage Isolation Amplifier, resistor scaling (converts current output to voltage output),
seismic brace, 0-100 mVdc (std.) input calibration.
Type of Input
Current
Voltage
Input Span
0 to 1 mAdc
0 to 50 mVdc thru 0 to 1000 Vdc
All inputs for these units are zero-based spans. The standard
input span is 0 to 100 mVdc. All 0 to 1 mAdc output units are
inherently bidirectional; P-Option units are unidirectional or
bidirectional as indicated in Table 2.
WIRING DIAGRAMS FOR 0 to 1 mAdc UNITS (Style II Case) AND P-OPTION UNITS (Style I Case)
Model No.
(0 to 1 mAdc Units)
6271A
(P-Option Units)
6271
EXTERNAL
AUX. PWR.
PAN6-B
PAN7-B
PAN8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
PA6
PA7
PA8
PA6-B
PA7-B
PA8-B
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
1
1
+
Gain Adjust
8
7
DC
INPUT
8
DC
INPUT
REF.
REF.
Zero Adjust
+
+
UNIDIRECTIONAL
BIDIRECTIONAL
Adjust
Caution: For 0 to 1 mAdc units, external auxiliary power connects to terminals 1 & 2;
for P-Option units, external auxiliary power connects to terminals 5 & 6.
114
SCI Transducer Cat 90-134(MTD)
DC
OUTPUT
DC
OUTPUT
REF.
Instrumentation
0 to 1 mAdc output is
standard, and is specified
by the Base Model
Numbers. For outputs
other than 0 to 1 mAdc,
indicate the appropriate
P-Option in the "Output"
position of the complete
model number.
P-Option
PAN6
PAN7
PAN8
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
AUX.
GAIN
EXTERNAL
AUX. POWER
AUX.
GAIN
Phone: 1-800-274-5368
Fax: 585-454-7805
115
114-115
1/9/02, 5:34 PM
Ordering Procedure
DC Voltage Isolation Amplifiers
Ordering Procedure
DC Voltage Isolation Amplifiers
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Option
-RS*
Output
Scaling
Resistor
Option #1
Table 1
Table 2
Table 3
0 to 1 mAdc
output
Option
#2
Input
Table 4
Table 5
External
Auxiliary
Power
6271
PAN7
-SM
Specify
output
voltage
100 mVdc
Option
-24
-SM
-Z
EXAMPLES:
6271A
P-Option
outputs
Description
Scaling Resistor
Description
24 Vdc Loop-Powered (PA7 and PA7-B models only)
(consult factory for specifications)
Seismic Brace (available with 0 to 1 mAdc units)
(consult factory if you desire this option with
a P-Option unit)
Zero-Based Output Calibration (ex.: PA7-Z = 0-20 mAdc)
(available only with P-Option units, except PAN-B
models)
6271A-RS-SM-100 mVdc
0 to 1 mAdc output DC Voltage Isolation Amplifier, resistor scaling (converts current output to voltage output),
seismic brace, 0 to 100 mVdc (std.) input calibration.
6271PAN7-RS-SM-100 mVdc
4-20 mAdc output DC Voltage Isolation Amplifier, resistor scaling (converts current output to voltage output),
seismic brace, 0-100 mVdc (std.) input calibration.
Type of Input
Current
Voltage
Input Span
0 to 1 mAdc
0 to 50 mVdc thru 0 to 1000 Vdc
All inputs for these units are zero-based spans. The standard
input span is 0 to 100 mVdc. All 0 to 1 mAdc output units are
inherently bidirectional; P-Option units are unidirectional or
bidirectional as indicated in Table 2.
WIRING DIAGRAMS FOR 0 to 1 mAdc UNITS (Style II Case) AND P-OPTION UNITS (Style I Case)
Model No.
(0 to 1 mAdc Units)
6271A
(P-Option Units)
6271
EXTERNAL
AUX. PWR.
PAN6-B
PAN7-B
PAN8-B
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
15 Vdc/3000
15 Vdc/750
15 Vdc/300
PA6
PA7
PA8
PA6-B
PA7-B
PA8-B
Maximum Open
Circuit Voltage
30 Vdc
30 Vdc
30 Vdc
30 Vdc
30 Vdc
30 Vdc
1-5 mAdc
4-20 mAdc
10-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
1-3-5 mAdc
4-12-20 mAdc
10-30-50 mAdc
40 Vdc/8000
40 Vdc/2000
30 Vdc/600
70 Vdc
70 Vdc
70 Vdc
Phone: 1-800-274-5368
Fax: 585-454-7805
1
1
+
Gain Adjust
8
7
DC
INPUT
8
DC
INPUT
REF.
REF.
Zero Adjust
+
+
UNIDIRECTIONAL
BIDIRECTIONAL
Adjust
Caution: For 0 to 1 mAdc units, external auxiliary power connects to terminals 1 & 2;
for P-Option units, external auxiliary power connects to terminals 5 & 6.
114
SCI Transducer Cat 90-134(MTD)
DC
OUTPUT
DC
OUTPUT
REF.
Instrumentation
0 to 1 mAdc output is
standard, and is specified
by the Base Model
Numbers. For outputs
other than 0 to 1 mAdc,
indicate the appropriate
P-Option in the "Output"
position of the complete
model number.
P-Option
PAN6
PAN7
PAN8
Compliance Voltage/
Maximum Load
15 Vdc/3000
15 Vdc/750
15 Vdc/300
AUX.
GAIN
EXTERNAL
AUX. POWER
AUX.
GAIN
Phone: 1-800-274-5368
Fax: 585-454-7805
115
114-115
1/9/02, 5:34 PM
SCIENTIFIC
DC Instrument Amplifiers
COLUMBUS
SCIENTIFIC
Ordering Procedure & Wiring Diagrams
COLUMBUS
ORDERING PROCEDURE FOR DC INSTRUMENT AMPLIFIERS
Model No.
6181A
Please consult the factory if you require any options with the 6181A DC Instrument Amplifier.
Operating modes include: current-amplifier mode, voltageamplifier mode, transresistance mode, and transconductance
mode.
WIRING DIAGRAMS FOR DC INSTRUMENT AMPLIFIERS (Style II Case)
Current-Amplifier Mode
Voltage-Amplifier Mode
DC INPUT
EXTERNAL
AUX. POWER
+ -
DC
INPUT
- +
DC OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
R1
5
SPECIFICATIONS
IS
CURRENT
INPUT
IL
6181
R1
010 A thru 05 mA
010 mV thru 08 V
DC Output Limits
(zero-based span)
Current
Voltage
010 mA (maximum)
08 V (maximum)
Effective Input
Impedance
Current
Voltage
< 10
>10 M
DC Linearity
Gain Stability
Zero Stability
20 V / C (maximum), 5 V / C (typical)
Referenced to Input
-10 C to +50 C
Response Time
ES
EXTERNAL
AUX. POWER
R1 + R2
R1
Transconductance Mode
DC
OUTPUT
EXTERNAL
AUX. POWER
EL
ES
DC INPUT
DC
INPUT
IS
7
CURRENT
INPUT
RK
* Must fall within input, output, and feedback resistance limits listed.
R1 + R2
R1
Approximate Dimensions
(excluding mounting plate)
Transresistance Mode
VOLTAGE
OUTPUT
DC
OUTPUT
7
4
VOLTAGE
INPUT
IL
3
1
VOLTAGE
EL OUTPUT
6181
RK
5
CURRENT
OUTPUT
6
RK
ES
RK
EL
IS
6181
= RK
ES
= RK
IL
Instrumentation
Accuracy/Temperature Effect/
Long-Term Stability
EL
IL
IS
Current
Voltage
6181
R2
100130 Vac
50500 Hz
5 VA (maximum)
DC Input Limits
(zero-based span)
VOLTAGE
INPUT
R2
7
R1
R2
R2
3
4
R1
DC Instrument Amplifier
Specifications
CURRENT
OUTPUT
Zero Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Fax: 585-454-7805
116
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
117
116-117
1/9/02, 5:34 PM
SCIENTIFIC
DC Instrument Amplifiers
COLUMBUS
SCIENTIFIC
Ordering Procedure & Wiring Diagrams
COLUMBUS
ORDERING PROCEDURE FOR DC INSTRUMENT AMPLIFIERS
Model No.
6181A
Please consult the factory if you require any options with the 6181A DC Instrument Amplifier.
Operating modes include: current-amplifier mode, voltageamplifier mode, transresistance mode, and transconductance
mode.
WIRING DIAGRAMS FOR DC INSTRUMENT AMPLIFIERS (Style II Case)
Current-Amplifier Mode
Voltage-Amplifier Mode
DC INPUT
EXTERNAL
AUX. POWER
+ -
DC
INPUT
- +
DC OUTPUT
DC
OUTPUT
EXTERNAL
AUX. POWER
R1
5
SPECIFICATIONS
IS
CURRENT
INPUT
IL
6181
R1
010 A thru 05 mA
010 mV thru 08 V
DC Output Limits
(zero-based span)
Current
Voltage
010 mA (maximum)
08 V (maximum)
Effective Input
Impedance
Current
Voltage
< 10
>10 M
DC Linearity
Gain Stability
Zero Stability
20 V / C (maximum), 5 V / C (typical)
Referenced to Input
-10 C to +50 C
Response Time
ES
EXTERNAL
AUX. POWER
R1 + R2
R1
Transconductance Mode
DC
OUTPUT
EXTERNAL
AUX. POWER
EL
ES
DC INPUT
DC
INPUT
IS
7
CURRENT
INPUT
RK
* Must fall within input, output, and feedback resistance limits listed.
R1 + R2
R1
Approximate Dimensions
(excluding mounting plate)
Transresistance Mode
VOLTAGE
OUTPUT
DC
OUTPUT
7
4
VOLTAGE
INPUT
IL
3
1
VOLTAGE
EL OUTPUT
6181
RK
5
CURRENT
OUTPUT
6
RK
ES
RK
EL
IS
6181
= RK
ES
= RK
IL
Instrumentation
Accuracy/Temperature Effect/
Long-Term Stability
EL
IL
IS
Current
Voltage
6181
R2
100130 Vac
50500 Hz
5 VA (maximum)
DC Input Limits
(zero-based span)
VOLTAGE
INPUT
R2
7
R1
R2
R2
3
4
R1
DC Instrument Amplifier
Specifications
CURRENT
OUTPUT
Zero Adjust
AMETEK Power Instruments
Phone: 1-800-274-5368
Fax: 585-454-7805
116
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
117
116-117
1/9/02, 5:34 PM
SCIENTIFIC
Analog-to-Pulse Converters
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
ANALOG-TO-PULSE CONVERTERS
Current
Input
Voltage
Input
Applications
Accuracy to 0.1% of
reading
Unidirectional or
bidirectional
Substations
Outputs
Rated
Output
(RO)
214,000 cph
2900,000 cph
(0.05% Reading + 0.005% RO)
0.005% / C (maximum)
Accuracy
Scientific Columbus analog-to-pulse converters have the same three-year warranty as the Exceltronic line.
Features
Analog-to-Pulse Converters
Specifications
-20 C to +70 C
Generating stations
Form-C mercury-wetted
relay or solid-state output
1% (minimum)
Operating Humidity
0-95% Noncondensing
Input/Power/Case and Output/Power Case
1500 VRMS
Orientation
Instrumentation
Surge Withstand
ANSI/IEEE C37.90.1
Within 30 of Vertical/Horizontal
Unlimited
Approximate Dimensions
(excluding mounting plate)
Phone: 1-800-274-5368
Fax: 585-454-7805
118
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
119
118-119
1/9/02, 5:34 PM
SCIENTIFIC
Analog-to-Pulse Converters
COLUMBUS
SCIENTIFIC
Specifications
COLUMBUS
ANALOG-TO-PULSE CONVERTERS
Current
Input
Voltage
Input
Applications
Accuracy to 0.1% of
reading
Unidirectional or
bidirectional
Substations
Outputs
Rated
Output
(RO)
214,000 cph
2900,000 cph
(0.05% Reading + 0.005% RO)
0.005% / C (maximum)
Accuracy
Scientific Columbus analog-to-pulse converters have the same three-year warranty as the Exceltronic line.
Features
Analog-to-Pulse Converters
Specifications
-20 C to +70 C
Generating stations
Form-C mercury-wetted
relay or solid-state output
1% (minimum)
Operating Humidity
0-95% Noncondensing
Input/Power/Case and Output/Power Case
1500 VRMS
Orientation
Instrumentation
Surge Withstand
ANSI/IEEE C37.90.1
Within 30 of Vertical/Horizontal
Unlimited
Approximate Dimensions
(excluding mounting plate)
Phone: 1-800-274-5368
Fax: 585-454-7805
118
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
119
118-119
1/9/02, 5:34 PM
Ordering Procedure
Analog-to-Pulse Converters
Wiring Diagrams
Analog-to-Pulse Converters
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Mounting
Orientation
SAF-2
Table 1
-VTable 2
Add'l. Form-C
Output(s)
Option #1
-ATable 3
Counter
Drive
Option #2
-CTable 3
DC
INPUT
Isolated
Input
Option #3
- +
-ISTable 4
10
11
EXTERNAL
AUX. POWER
DC
INPUT
- +
6A
10
11
12 12A
6A
EXAMPLES:
SAF-2-V-A-C-IS
0 to -1 mAdc, 2-channel Analog-to-Pulse Converter with two standard Form-C solid-state outputs; vertical mounting;
two additional Form-C mercury-wetted relays; two counter-drive outputs; isolated inputs.
Input
0-1 mAdc
0-1 mAdc
0-1 Vdc
0-1 Vdc
0 to 1 mAdc
0 to 1 mAdc
0 to 1 Vdc
0 to 1 Vdc
0 to -1 mAdc
0 to -1 mAdc
0 to -1 mAdc
12 12A
OUTPUT RELAY
(FORM-C)
SOLID-STATE OUTPUT
(FORM-C)
Configuration
Unidirectional
Unidirectional
Unidirectional
Unidirectional
Bidirectional
Bidirectional
Bidirectional
Bidirectional
1 Channel, Unidirectional
2 Channels, Unidirectional
3 Channels, Unidirectional
Input Impedance
1 (maximum)
1 (maximum)
10 M (minimum)
10 M (minimum)
1 (maximum)
1 (maximum)
10 M (minimum)
10 M (minimum)
1 (maximum)
1 (maximum)
1 (maximum)
Output
1 Form-C Mercury-Wetted Relay
1 Form-C Solid-State Output
1 Form-C Mercury-Wetted Relay
1 Form-C Solid-State Output
2 Form-C Mercury-Wetted Relays
2 Form-C Solid-State Outputs
2 Form-C Mercury-Wetted Relays
2 Form-C Solid-State Outputs
1 Form-C Solid-State Output
2 Form-C Solid-State Outputs
3 Form-C Solid-State Outputs
DC
INPUT
CPH Range*
2-14,000
2-900,000
2-14,000
2-900,000
2-14,000
2-900,000
2-14,000
2-900,000
2-900,000
2-900,000
2-900,000
- +
* You must specify the desired counts per hour. This information is not part of the model number, but must be provided to the factory when you place your order.
10
11
REVERSE
EXTERNAL
AUX. POWER
DC
INPUT
- +
6A
12 12A
FORWARD
10
11
REVERSE
6A
12 12A
FORWARD
** Standard SAF-2 and SAF-3 units have common positive input terminals.
OUTPUT RELAYS
(FORM-C)
DC INPUTS
-+-+-+
EXTERNAL
AUX. POWER
Description
Add'l. Form-C Mercury-Wetted Relay(s)
Add'l. Form-C Solid-State Output(s)
Counter-Drive Output(s)
9
A
C
A
B
B
10 11 12 13 14 15
This option applies only to SAF-model units and requires a Style V case.
(See page 123 for case dimensions.)
Please consult the factory if you require any additional options with Analog-to-Pulse Converters.
Phone: 1-800-274-5368
Fax: 585-454-7805
OPTIONAL
COUNTER-DRIVE
OUTPUTS
120
SCI Transducer Cat 90-134(MTD)
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Description
Isolated Inputs
These options apply only to SAF models. The number of relays, solid-state
outputs, or counter drives corresponds to the number of channels in the
unit. (Example: An SAF-3-A unit has three additional Form-C mercurywetted relays in addition to the three standard solid-state outputs.)
Instrumentation
Option
-H
-V
SOLID-STATE OUTPUTS
(FORM-C)
OPTIONAL
OUTPUT RELAYS
(FORM-C)
Gain Adjust
Rochester, New York 14605
Phone: 1-800-274-5368
Fax: 585-454-7805
121
120-121
1/9/02, 5:34 PM
Ordering Procedure
Analog-to-Pulse Converters
Wiring Diagrams
Analog-to-Pulse Converters
ORDERING PROCEDURE
Specify by base model number and appropriate selection or option suffixes in the order shown in the following example.
Mounting
Orientation
SAF-2
Table 1
-VTable 2
Add'l. Form-C
Output(s)
Option #1
-ATable 3
Counter
Drive
Option #2
-CTable 3
DC
INPUT
Isolated
Input
Option #3
- +
-ISTable 4
10
11
EXTERNAL
AUX. POWER
DC
INPUT
- +
6A
10
11
12 12A
6A
EXAMPLES:
SAF-2-V-A-C-IS
0 to -1 mAdc, 2-channel Analog-to-Pulse Converter with two standard Form-C solid-state outputs; vertical mounting;
two additional Form-C mercury-wetted relays; two counter-drive outputs; isolated inputs.
Input
0-1 mAdc
0-1 mAdc
0-1 Vdc
0-1 Vdc
0 to 1 mAdc
0 to 1 mAdc
0 to 1 Vdc
0 to 1 Vdc
0 to -1 mAdc
0 to -1 mAdc
0 to -1 mAdc
12 12A
OUTPUT RELAY
(FORM-C)
SOLID-STATE OUTPUT
(FORM-C)
Configuration
Unidirectional
Unidirectional
Unidirectional
Unidirectional
Bidirectional
Bidirectional
Bidirectional
Bidirectional
1 Channel, Unidirectional
2 Channels, Unidirectional
3 Channels, Unidirectional
Input Impedance
1 (maximum)
1 (maximum)
10 M (minimum)
10 M (minimum)
1 (maximum)
1 (maximum)
10 M (minimum)
10 M (minimum)
1 (maximum)
1 (maximum)
1 (maximum)
Output
1 Form-C Mercury-Wetted Relay
1 Form-C Solid-State Output
1 Form-C Mercury-Wetted Relay
1 Form-C Solid-State Output
2 Form-C Mercury-Wetted Relays
2 Form-C Solid-State Outputs
2 Form-C Mercury-Wetted Relays
2 Form-C Solid-State Outputs
1 Form-C Solid-State Output
2 Form-C Solid-State Outputs
3 Form-C Solid-State Outputs
DC
INPUT
CPH Range*
2-14,000
2-900,000
2-14,000
2-900,000
2-14,000
2-900,000
2-14,000
2-900,000
2-900,000
2-900,000
2-900,000
- +
* You must specify the desired counts per hour. This information is not part of the model number, but must be provided to the factory when you place your order.
10
11
REVERSE
EXTERNAL
AUX. POWER
DC
INPUT
- +
6A
12 12A
FORWARD
10
11
REVERSE
6A
12 12A
FORWARD
** Standard SAF-2 and SAF-3 units have common positive input terminals.
OUTPUT RELAYS
(FORM-C)
DC INPUTS
-+-+-+
EXTERNAL
AUX. POWER
Description
Add'l. Form-C Mercury-Wetted Relay(s)
Add'l. Form-C Solid-State Output(s)
Counter-Drive Output(s)
9
A
C
A
B
B
10 11 12 13 14 15
This option applies only to SAF-model units and requires a Style V case.
(See page 123 for case dimensions.)
Please consult the factory if you require any additional options with Analog-to-Pulse Converters.
Phone: 1-800-274-5368
Fax: 585-454-7805
OPTIONAL
COUNTER-DRIVE
OUTPUTS
120
SCI Transducer Cat 90-134(MTD)
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Description
Isolated Inputs
These options apply only to SAF models. The number of relays, solid-state
outputs, or counter drives corresponds to the number of channels in the
unit. (Example: An SAF-3-A unit has three additional Form-C mercurywetted relays in addition to the three standard solid-state outputs.)
Instrumentation
Option
-H
-V
SOLID-STATE OUTPUTS
(FORM-C)
OPTIONAL
OUTPUT RELAYS
(FORM-C)
Gain Adjust
Rochester, New York 14605
Phone: 1-800-274-5368
Fax: 585-454-7805
121
120-121
1/9/02, 5:34 PM
SCIENTIFIC
Registers
COLUMBUS
SCIENTIFIC
Ordering Procedure & Wiring Diagrams
COLUMBUS
Specify by base model number and appropriate option or selection suffixes in the order shown in the following example.
Auxiliary
Output
Option #1
6152R
Mounting
Configuration
Option #2
Table 1
Table 2
External
Auxiliary
Power
Mounting
Orientation
-V
Table 3
Table 4
All units have 120 Vac external aux. power. Specify other voltage, if
required: 69 Vac Aux., 240 Vac Aux., 277 Vac Aux., or 480 Vac Aux.
FEATURES
Unidirectional or
bidirectional
6-digit resettable or
7-digit nonresettable display
SPECIFICATIONS
Input
External
Auxiliary
Power
Model No.
6152
6152R
6153
6153R
Registers
Specifications
Single or Dual
Form-C Relays
Maximum Input Rate
Open Contact Voltage
Closed Contact Current
Closed Contact Voltage
Input Range
Frequency Range
Burden
108132 Vac
50500 Hz
1.5 VA Nominal at 120 V
Accuracy
6152RDP-V
Single 6-digit Resettable Register, single auxiliary relay output, panel mounting, vertical mounting.
Description
Single 7-digit Register
Single 6-digit Register
Dual 7-digit Register
Dual 6-digit Register
Option
D
DD
Option
Std. (leave blank)
P
Option
-H
-V
Description
Wall or Shelf Mounting
Panel Mounting
Visual Output
-20 C to +60 C
Single or Dual Registers, Figure Size 3/16" High, 6-Digit Resettable or 7-Digit Nonresettable Display
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
Y'F
Register
Characteristics
One count is registered for each transfer of the Form-C, 3-wire input.
The register holds counts indefinitely under power-failure conditions and does not give false counts when the power is restored.
INPUT PULSE
CONTACT SOURCE
INPUT PULSE
CONTACT SOURCE
Y
Y'
The normally open and normally closed contacts transfer their previous position for each transfer of the corresponding input relay.
< 250 ms
Operating Humidity
095% Noncondensing
Input/Power/Case
Input/Output
ZF
F
K'
Y''
1000 VRMS at 60 Hz
K'R
K''
Standard
Optional
EXTERNAL
AUX. POWER
Z''
EXTERNAL
AUX. POWER
120 Vac
Z'R
Phone: 1-800-274-5368
Fax: 585-454-7805
122
Y'R
EXTERNAL
AUX. POWER
**
K'R
120 Vac
60 Hz
R
REGISTER
Z''F
ZR
60 Hz
60 Hz
Approximate Dimensions
(excluding mounting plate)
120 Vac
K''F
YR
Y'R
**
Y''F
ZF
K'F
Z'F
YF
Z'F
ZR
R
K'F
YR
Z'
1500 VRMS at 60 Hz
INPUT PULSE
CONTACT SOURCE
Y'F
Response Time
YF
F
REGISTER
Instrumentation
F
REGISTER
REGISTER
Description
Horizontal Mounting
Vertical Mounting
Mounting
Configuration
Description
Single Auxiliary Relay Output
(one relay per register)
Dual Auxiliary Relay Output
(two relays per register)
R
REGISTER
Z'R
Y''R
K''R
Z''R
Phone: 1-800-274-5368
Fax: 585-454-7805
123
122-123
1/9/02, 5:34 PM
SCIENTIFIC
Registers
COLUMBUS
SCIENTIFIC
Ordering Procedure & Wiring Diagrams
COLUMBUS
Specify by base model number and appropriate option or selection suffixes in the order shown in the following example.
Auxiliary
Output
Option #1
6152R
Mounting
Configuration
Option #2
Table 1
Table 2
External
Auxiliary
Power
Mounting
Orientation
-V
Table 3
Table 4
All units have 120 Vac external aux. power. Specify other voltage, if
required: 69 Vac Aux., 240 Vac Aux., 277 Vac Aux., or 480 Vac Aux.
FEATURES
Unidirectional or
bidirectional
6-digit resettable or
7-digit nonresettable display
SPECIFICATIONS
Input
External
Auxiliary
Power
Model No.
6152
6152R
6153
6153R
Registers
Specifications
Single or Dual
Form-C Relays
Maximum Input Rate
Open Contact Voltage
Closed Contact Current
Closed Contact Voltage
Input Range
Frequency Range
Burden
108132 Vac
50500 Hz
1.5 VA Nominal at 120 V
Accuracy
6152RDP-V
Single 6-digit Resettable Register, single auxiliary relay output, panel mounting, vertical mounting.
Description
Single 7-digit Register
Single 6-digit Register
Dual 7-digit Register
Dual 6-digit Register
Option
D
DD
Option
Std. (leave blank)
P
Option
-H
-V
Description
Wall or Shelf Mounting
Panel Mounting
Visual Output
-20 C to +60 C
Single or Dual Registers, Figure Size 3/16" High, 6-Digit Resettable or 7-Digit Nonresettable Display
15 VA at 1 A (maximum) or 150 Vac/15 Vdc (maximum) with resistive load. Contact protection required for inductive loads.
Y'F
Register
Characteristics
One count is registered for each transfer of the Form-C, 3-wire input.
The register holds counts indefinitely under power-failure conditions and does not give false counts when the power is restored.
INPUT PULSE
CONTACT SOURCE
INPUT PULSE
CONTACT SOURCE
Y
Y'
The normally open and normally closed contacts transfer their previous position for each transfer of the corresponding input relay.
< 250 ms
Operating Humidity
095% Noncondensing
Input/Power/Case
Input/Output
ZF
F
K'
Y''
1000 VRMS at 60 Hz
K'R
K''
Standard
Optional
EXTERNAL
AUX. POWER
Z''
EXTERNAL
AUX. POWER
120 Vac
Z'R
Phone: 1-800-274-5368
Fax: 585-454-7805
122
Y'R
EXTERNAL
AUX. POWER
**
K'R
120 Vac
60 Hz
R
REGISTER
Z''F
ZR
60 Hz
60 Hz
Approximate Dimensions
(excluding mounting plate)
120 Vac
K''F
YR
Y'R
**
Y''F
ZF
K'F
Z'F
YF
Z'F
ZR
R
K'F
YR
Z'
1500 VRMS at 60 Hz
INPUT PULSE
CONTACT SOURCE
Y'F
Response Time
YF
F
REGISTER
Instrumentation
F
REGISTER
REGISTER
Description
Horizontal Mounting
Vertical Mounting
Mounting
Configuration
Description
Single Auxiliary Relay Output
(one relay per register)
Dual Auxiliary Relay Output
(two relays per register)
R
REGISTER
Z'R
Y''R
K''R
Z''R
Phone: 1-800-274-5368
Fax: 585-454-7805
123
122-123
1/9/02, 5:34 PM
SCIENTIFIC
Calibrator
COLUMBUS
SCIENTIFIC
Specifications & Ordering Procedure
COLUMBUS
CALIBRATOR
Scientific Columbus Model 6444 Portable Transducer
Calibrator is designed for easy field verification and precision
calibration of watt, var, voltage, and current transducers.
With its solid-state measurement technology and programmability, it is ideal for field testing and calibration of power-monitoring
transducers and supervisory control systems, and as a calibrator/
tester for receiving inspection.
Function
Tester and calibrator for ac watt, var, voltage, and current transducers
Output Ranges
0150 V
05 or 010 A
0750 or 01500 W
0750 or 01500 Vars
15 VA Nominal
High
Range
Low
Range
010 Vdc for zero to full scale of test quantity (V, A, W, Var)
108132 Vac
60 Hz (50 Hz optional)
40130 VA (dependent upon loading on voltage- and current-output circuits)
0.1% RO
Individual LCD indicating displays provide readouts of watts, vars, volts, and amps. The % Error meter displays
percent-of-reading error. Test voltage from 0150 Vac and current from 05 A or 010 A may be adjusted
independently. During watt or var testing, volts and amps are displayed continuously.
No external loads or accessory equipment are required. The null method of calibration and testing is used. An
internal precision-reference standard and the transducer under test are subjected to identical input variables. The
standard and test transducer output signals are compared algebraically. The difference between the two is displayed
directly on a differential null meter, which reads deviations of up to 19.99%. The Model 6444 Calibrator and this
differential measurement technique offer distinct advantages:
The industrys highest resolution and accuracy.
Consistentreadings.Variationsintestconditionsdo
not influence the results.
Calibrator
Specifications
Accuracy of Digital
Indicating Displays
15 C to 35 C
199,999 and Infinity, selected by thumbwheel digital-readout switches
Operating Humidity
095% Noncondensing
Displays
Display Scaling
Volts
Amps
Watts/Vars
Error
Terminations
Five-way binding posts are mounted on the front panel of the instrument. Power receptable is on the rear of the case.
Accessories
No accessories are required for complete functional testing of transducers with 01 mAdc output. An optional offset adapter
(Model 6242B) is available for use with transducers with outputs of 15/135, 420/41220, or 1050/103050 mAdc.
Packaging
Approximate Dimensions
Scientific Columbus Model 6444 Calibrator has the same three-year warranty as the Exceltronic line.
ORDERING PROCEDURE
Applications
Features
Outputs
Transducer calibration
0150 V
Digitally programmable
Receiving inspection
05 or 010 A
Self-contained
Field testing
0750 or 01500 W
Portable
6242B
One-person operation
Description
6444 Calibrator, 60 Hz
6444 Calibrator, 50 Hz
6444 Calibrator, 60 Hz, 240 Vac External Auxiliary Power
6444 Calibrator, 50 Hz, 240 Vac External Auxiliary Power
6444 Calibrator, 60 Hz, Expanded Scale
Calibrator with Internal Offset Adapter for Calibrating Transducers with 15/135 mAdc, 420/41220 mAdc,
or 1050/103050 mAdc Outputs
Offset Adaptor (to be used with 6444 Calibrator) for Calibrating Transducers with 15/135 mAdc,
420/41220 mAdc, or 1050/103050 mAdc Outputs
Phone: 1-800-274-5368
Fax: 585-454-7805
124
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Reference
Multifunction calibrator/tester
Model No.
6444
6444-50
6444-240V Aux.
6444-50 240V Aux.
6444-EX
6444-P
Fax: 585-454-7805
125
124-125
1/9/02, 5:34 PM
SCIENTIFIC
Calibrator
COLUMBUS
SCIENTIFIC
Specifications & Ordering Procedure
COLUMBUS
CALIBRATOR
Scientific Columbus Model 6444 Portable Transducer
Calibrator is designed for easy field verification and precision
calibration of watt, var, voltage, and current transducers.
With its solid-state measurement technology and programmability, it is ideal for field testing and calibration of power-monitoring
transducers and supervisory control systems, and as a calibrator/
tester for receiving inspection.
Function
Tester and calibrator for ac watt, var, voltage, and current transducers
Output Ranges
0150 V
05 or 010 A
0750 or 01500 W
0750 or 01500 Vars
15 VA Nominal
High
Range
Low
Range
010 Vdc for zero to full scale of test quantity (V, A, W, Var)
108132 Vac
60 Hz (50 Hz optional)
40130 VA (dependent upon loading on voltage- and current-output circuits)
0.1% RO
Individual LCD indicating displays provide readouts of watts, vars, volts, and amps. The % Error meter displays
percent-of-reading error. Test voltage from 0150 Vac and current from 05 A or 010 A may be adjusted
independently. During watt or var testing, volts and amps are displayed continuously.
No external loads or accessory equipment are required. The null method of calibration and testing is used. An
internal precision-reference standard and the transducer under test are subjected to identical input variables. The
standard and test transducer output signals are compared algebraically. The difference between the two is displayed
directly on a differential null meter, which reads deviations of up to 19.99%. The Model 6444 Calibrator and this
differential measurement technique offer distinct advantages:
The industrys highest resolution and accuracy.
Consistentreadings.Variationsintestconditionsdo
not influence the results.
Calibrator
Specifications
Accuracy of Digital
Indicating Displays
15 C to 35 C
199,999 and Infinity, selected by thumbwheel digital-readout switches
Operating Humidity
095% Noncondensing
Displays
Display Scaling
Volts
Amps
Watts/Vars
Error
Terminations
Five-way binding posts are mounted on the front panel of the instrument. Power receptable is on the rear of the case.
Accessories
No accessories are required for complete functional testing of transducers with 01 mAdc output. An optional offset adapter
(Model 6242B) is available for use with transducers with outputs of 15/135, 420/41220, or 1050/103050 mAdc.
Packaging
Approximate Dimensions
Scientific Columbus Model 6444 Calibrator has the same three-year warranty as the Exceltronic line.
ORDERING PROCEDURE
Applications
Features
Outputs
Transducer calibration
0150 V
Digitally programmable
Receiving inspection
05 or 010 A
Self-contained
Field testing
0750 or 01500 W
Portable
6242B
One-person operation
Description
6444 Calibrator, 60 Hz
6444 Calibrator, 50 Hz
6444 Calibrator, 60 Hz, 240 Vac External Auxiliary Power
6444 Calibrator, 50 Hz, 240 Vac External Auxiliary Power
6444 Calibrator, 60 Hz, Expanded Scale
Calibrator with Internal Offset Adapter for Calibrating Transducers with 15/135 mAdc, 420/41220 mAdc,
or 1050/103050 mAdc Outputs
Offset Adaptor (to be used with 6444 Calibrator) for Calibrating Transducers with 15/135 mAdc,
420/41220 mAdc, or 1050/103050 mAdc Outputs
Phone: 1-800-274-5368
Fax: 585-454-7805
124
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Reference
Multifunction calibrator/tester
Model No.
6444
6444-50
6444-240V Aux.
6444-50 240V Aux.
6444-EX
6444-P
Fax: 585-454-7805
125
124-125
1/9/02, 5:34 PM
1.02"
(25.91 mm)
.53"
(13.46 mm)
.25"
(6.35 mm)
1.14"
(28.96 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
6.95"
(176.53 mm)
5.02"
(127.51 mm)
.23"
(5.84 mm)
3.77"
(95.76 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
7.31"
(185.67 mm)
.53"
(13.46 mm)
.094" RAD.
(2.39 mm)
.23"
(5.84 mm)
3.54"
(89.92 mm)
2.00"
(50.80 mm)
2.00"
(50.80 mm)
.094" RAD.
(2.39 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
7.83"
(198.88 mm)
.07"
(1.78 mm)
5.78"
(146.81 mm)
4.75"
(120.65 mm)
5.25"
(133.35 mm)
Style I
.07"
(1.78 mm)
Style IV
1.14"
(28.96 mm)
.53"
(13.46 mm)
1.82"
(46.23 mm)
.25"
(6.35 mm)
.53"
(13.46 mm)
.23"
(5.84 mm)
3.77"
(95.76 mm)
4.15"
(105.41 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
.07"
(1.78 mm)
.094" RAD.
(2.39 mm)
3.00"
(76.20 mm)
2.00"
(50.80 mm)
.094" RAD.
(2.39 mm)
5.15"
(130.81 mm)
.23"
(5.84 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.75"
(120.65 mm)
5.25"
(133.35 mm)
7.16"
(181.86 mm)
Style II
5.28"
(134.11 mm)
.10"
(2.54 mm)
7.31"
(185.67 mm)
7.83"
(198.88 mm)
Style V
1.50"
(38.10 mm)
2.05"
(52.07 mm)
.53"
(13.46 mm)
.23"
(5.84 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
3.07"
(77.98 mm)
.25"
(6.35 mm)
3.50"
(88.90 mm)
Instrumentation
3.53"
(89.66 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.00"
(101.60 mm)
.07"
(1.78 mm)
Style III
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams.
Drawings not to scale.
Phone: 1-800-274-5368
Fax: 585-454-7805
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams.
Drawings not to scale.
126
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
127
126-127
1/9/02, 5:34 PM
1.02"
(25.91 mm)
.53"
(13.46 mm)
.25"
(6.35 mm)
1.14"
(28.96 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
6.95"
(176.53 mm)
5.02"
(127.51 mm)
.23"
(5.84 mm)
3.77"
(95.76 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
7.31"
(185.67 mm)
.53"
(13.46 mm)
.094" RAD.
(2.39 mm)
.23"
(5.84 mm)
3.54"
(89.92 mm)
2.00"
(50.80 mm)
2.00"
(50.80 mm)
.094" RAD.
(2.39 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
7.83"
(198.88 mm)
.07"
(1.78 mm)
5.78"
(146.81 mm)
4.75"
(120.65 mm)
5.25"
(133.35 mm)
Style I
.07"
(1.78 mm)
Style IV
1.14"
(28.96 mm)
.53"
(13.46 mm)
1.82"
(46.23 mm)
.25"
(6.35 mm)
.53"
(13.46 mm)
.23"
(5.84 mm)
3.77"
(95.76 mm)
4.15"
(105.41 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.40"
(111.76 mm)
.07"
(1.78 mm)
.094" RAD.
(2.39 mm)
3.00"
(76.20 mm)
2.00"
(50.80 mm)
.094" RAD.
(2.39 mm)
5.15"
(130.81 mm)
.23"
(5.84 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
1.50"
(38.10 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.75"
(120.65 mm)
5.25"
(133.35 mm)
7.16"
(181.86 mm)
Style II
5.28"
(134.11 mm)
.10"
(2.54 mm)
7.31"
(185.67 mm)
7.83"
(198.88 mm)
Style V
1.50"
(38.10 mm)
2.05"
(52.07 mm)
.53"
(13.46 mm)
.23"
(5.84 mm)
.36" DIA.
(9.14 mm)
2 KEYSLOTS
3.07"
(77.98 mm)
.25"
(6.35 mm)
3.50"
(88.90 mm)
Instrumentation
3.53"
(89.66 mm)
.187" DIA.
(4.75 mm)
2 MOUNTING
HOLES
4.00"
(101.60 mm)
.07"
(1.78 mm)
Style III
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams.
Drawings not to scale.
Phone: 1-800-274-5368
Fax: 585-454-7805
Terminal strips shown for illustration purposes only. For exact terminal-strip configuration on specific units, see connection diagrams.
Drawings not to scale.
126
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Fax: 585-454-7805
127
126-127
1/9/02, 5:34 PM
Transducer Glossary
Transducer Glossary
Accuracy
The degree of uncertainty with which a measured value
agrees with the ideal value.
Analog Output Shorting Relay (-CE)
The shorting relay monitors the external auxiliary power signal
on a watt, var, or watt/var unit. If the external auxiliary power
deviates from a prespecified range (i.e., below 85 V), a relay
contact closes, shorting the analog output. This helps prevent
erroneous signals from the analog output due to low external
auxiliary power.
Apparent Power (volt-amps)
The product of the applied voltage and current in an ac circuit.
Apparent power, or volt-amps, is not the true power of the
circuit because the power factor is not considered in the
calculation.
Auxiliary Power
See External Auxiliary Power and Internal Auxiliary Power.
Balanced Load
Refers to an equal loading of the phases in a polyphase
system (current and phase angle).
Bidirectional (-B)
A bidirectional unit allows measurements of inputs which
flow in two directions, forward and reverse. A typical
41220 mAdc device would have a zero setting at 12 and
minimum and maximum settings at 4 and 20, respectively.
The -B option applies only to P-Option units. Add -B to the
PAN or PA designator to specify a bidirectional unit (for
example, 41220 mAdc versus 420 mAdc).
Burden
Load imposed by a transducer on the measured input circuit,
expressed in volt-amps.
Calibration
Adjustment of a transducer so the output is within a specified
range for particular values of the input.
Phone: 1-800-274-5368
Fax: 585-454-7805
15 A Input (-7)
The unit operates from 020 A. The standard calibration is
1500 W or vars per element input for 1 mAdc output.
Frequency
A measure of the number of complete cycles of a waveform
per unit of time, specified in Hertz (Hz), or cycles per second.
The following options refer to signal input frequency only:
25 A Input (-8)
The unit operates from 030 A. The standard calibration is
2500 W or vars per element input for 1 mAdc output. The
25 A option requires a larger case and is not available on all
transducers.
50 Hz Operation (-12)
400 Hz Operation (-6)
Full Scale (F.S.)
The specified maximum magnitude of the input quantity being
measured that can be applied to a transducer without causing
a change in performance beyond specified tolerance.
Full Scale Output
The specified maximum output value for which the stated
accuracy condition applies.
Impedance
The total opposing force to the flow of current in an ac circuit.
Input
The standard transducer input is 5 A and 120 V; however,
many other inputs are available:
69 V Input (-0)
The unit operates from 075 V. The standard calibration is
250 W or vars per element input for 1 mAdc output.
240 V Input (-1)
The unit operates from 0300 V. The standard calibration is
1000 W or vars per element input for 1 mAdc output.
277 V Input (-9)
The unit operates from 0340 V. The standard calibration is
1200 W or vars per element input for 1 mAdc output.
480 V Input (-2)
The unit operates from 0600 V. The standard calibration is
2000 W or vars per element input for 1 mAdc output.
1 A Input (-3)
The unit operates from 02 A. The standard calibration is
100 W or vars per element input for 1 mAdc output.
2.5 A Input (-4)
The unit operates from 05 A. The standard calibration is
250 W or vars per element input for 1 mAdc output.
7.5 A Input (-11)
The unit operates from 015 A. The standard calibration is
750 W or vars per element input for 1 mAdc output.
10 A Input (-5)
The unit operates from 020 A. The standard calibration is
1000 W or vars per element input for 1 mAdc output.
128
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Reference
Fax: 585-454-7805
129
128-129
1/9/02, 5:34 PM
Transducer Glossary
Transducer Glossary
Accuracy
The degree of uncertainty with which a measured value
agrees with the ideal value.
Analog Output Shorting Relay (-CE)
The shorting relay monitors the external auxiliary power signal
on a watt, var, or watt/var unit. If the external auxiliary power
deviates from a prespecified range (i.e., below 85 V), a relay
contact closes, shorting the analog output. This helps prevent
erroneous signals from the analog output due to low external
auxiliary power.
Apparent Power (volt-amps)
The product of the applied voltage and current in an ac circuit.
Apparent power, or volt-amps, is not the true power of the
circuit because the power factor is not considered in the
calculation.
Auxiliary Power
See External Auxiliary Power and Internal Auxiliary Power.
Balanced Load
Refers to an equal loading of the phases in a polyphase
system (current and phase angle).
Bidirectional (-B)
A bidirectional unit allows measurements of inputs which
flow in two directions, forward and reverse. A typical
41220 mAdc device would have a zero setting at 12 and
minimum and maximum settings at 4 and 20, respectively.
The -B option applies only to P-Option units. Add -B to the
PAN or PA designator to specify a bidirectional unit (for
example, 41220 mAdc versus 420 mAdc).
Burden
Load imposed by a transducer on the measured input circuit,
expressed in volt-amps.
Calibration
Adjustment of a transducer so the output is within a specified
range for particular values of the input.
Phone: 1-800-274-5368
Fax: 585-454-7805
15 A Input (-7)
The unit operates from 020 A. The standard calibration is
1500 W or vars per element input for 1 mAdc output.
Frequency
A measure of the number of complete cycles of a waveform
per unit of time, specified in Hertz (Hz), or cycles per second.
The following options refer to signal input frequency only:
25 A Input (-8)
The unit operates from 030 A. The standard calibration is
2500 W or vars per element input for 1 mAdc output. The
25 A option requires a larger case and is not available on all
transducers.
50 Hz Operation (-12)
400 Hz Operation (-6)
Full Scale (F.S.)
The specified maximum magnitude of the input quantity being
measured that can be applied to a transducer without causing
a change in performance beyond specified tolerance.
Full Scale Output
The specified maximum output value for which the stated
accuracy condition applies.
Impedance
The total opposing force to the flow of current in an ac circuit.
Input
The standard transducer input is 5 A and 120 V; however,
many other inputs are available:
69 V Input (-0)
The unit operates from 075 V. The standard calibration is
250 W or vars per element input for 1 mAdc output.
240 V Input (-1)
The unit operates from 0300 V. The standard calibration is
1000 W or vars per element input for 1 mAdc output.
277 V Input (-9)
The unit operates from 0340 V. The standard calibration is
1200 W or vars per element input for 1 mAdc output.
480 V Input (-2)
The unit operates from 0600 V. The standard calibration is
2000 W or vars per element input for 1 mAdc output.
1 A Input (-3)
The unit operates from 02 A. The standard calibration is
100 W or vars per element input for 1 mAdc output.
2.5 A Input (-4)
The unit operates from 05 A. The standard calibration is
250 W or vars per element input for 1 mAdc output.
7.5 A Input (-11)
The unit operates from 015 A. The standard calibration is
750 W or vars per element input for 1 mAdc output.
10 A Input (-5)
The unit operates from 020 A. The standard calibration is
1000 W or vars per element input for 1 mAdc output.
128
SCI Transducer Cat 90-134(MTD)
Phone: 1-800-274-5368
Reference
Fax: 585-454-7805
129
128-129
1/9/02, 5:34 PM
Transducer Glossary
Transducer Glossary
Range
Nominal operating limits, specified by the lowest calibration
point to the highest calibration point.
Rated Output (RO)
The output at standard calibration.
Overload
The specified maximum magnitude of the input quantity being
measured that can be applied to a transducer for a specified
period of time without causing damage.
Overrange
The specified maximum operating point for which the stated
accuracy condition applies.
Peak to Peak
The amplitude of the ac waveform from its positive peak to its
negative peak.
Phase Angle
The angular displacement between a current and voltage
waveform, measured in degrees or radians.
P-Option
P-Option refers to model number designators that specify
certain outputs required for process control applications:
15 mAdc Output
(-PAN6) Where a compliance rating of 3000 or 15 Vdc is
required.
(-PA6) Where a compliance rating of 8000 or 40 Vdc is
required.
(-P6 for XLP models) Where a compliance rating of 5000
or 25 Vdc is required.
420 mAdc Output
(-PAN7) Where a compliance rating of 750 or 15 Vdc is
required.
(-PA7) Where a compliance rating of 2000 or 40 Vdc is
required.
(-P7 for XLP models) Where a compliance rating of 1250
or 25 Vdc is required.
Standard Calibration
The nominal point at which a transducer is adjusted.
Surge Withstand
A measure of a transducers ability to withstand high-voltage,
high-frequency transients of short duration without damage.
Response Time
The time for a transducer output signal to reach 99% of its
final value after a step change in the applied input. Typically
the response is an exponential curve.
Ripple
The magnitude of ac fluctuations in a dc signal, after filtering.
Usually expressed as a percentage of rated output.
Transducer
A device for converting an electrical signal into a usable
direct current or voltage for measurement purposes.
Root-Mean-Square (RMS)
The effective value of alternating current or voltage. The RMS
value equates an ac signal to a dc signal that provides the
same power transfer.
Transformer Factor
The product of the current transformer ratio (CTR) and the
voltage transformer ratio (VTR). Also called the power ratio.
Unbalanced Loads
Refers to an unequal loading of the phases in a polyphase
system (current and/or phase angle).
Unidirectional Unit
A unidirectional unit allows inputs to be measured in
one direction only. The stated output range (for example,
420 mAdc) indicates the minimum and maximum input levels.
Voltage Transformer (VT)
Transformer used to accurately scale ac voltages up
or down, or to provide isolation. Generally used to scale large
primary or bus voltages to usable values for measuring
purposes.
Voltage Transformer Ratio (VTR)
The ratio of primary volts divided by secondary volts.
Zero-Based Output Calibration (-Z)
The -Z option applies only to P-Option units. The normal zero
point1, 4, or 10 mAdcis replaced with a 0 mAdc zero
point. For example, when a PAN7-Z unit is specified, the
output range of the unit will be 020 mAdc instead of
420 mAdc. The -Z option is not available with PAN-B models.
Phone: 1-800-274-5368
Fax: 585-454-7805
130
SCI Transducer Cat 90-134(MTD)
Stability
The ability of a transducer to maintain its performance
characteristics over a specified period of time.
Reading
The expected output at a given input value.
Reference
Phone: 1-800-274-5368
Fax: 585-454-7805
131
130-131
1/9/02, 5:35 PM
Transducer Glossary
Transducer Glossary
Range
Nominal operating limits, specified by the lowest calibration
point to the highest calibration point.
Rated Output (RO)
The output at standard calibration.
Overload
The specified maximum magnitude of the input quantity being
measured that can be applied to a transducer for a specified
period of time without causing damage.
Overrange
The specified maximum operating point for which the stated
accuracy condition applies.
Peak to Peak
The amplitude of the ac waveform from its positive peak to its
negative peak.
Phase Angle
The angular displacement between a current and voltage
waveform, measured in degrees or radians.
P-Option
P-Option refers to model number designators that specify
certain outputs required for process control applications:
15 mAdc Output
(-PAN6) Where a compliance rating of 3000 or 15 Vdc is
required.
(-PA6) Where a compliance rating of 8000 or 40 Vdc is
required.
(-P6 for XLP models) Where a compliance rating of 5000
or 25 Vdc is required.
420 mAdc Output
(-PAN7) Where a compliance rating of 750 or 15 Vdc is
required.
(-PA7) Where a compliance rating of 2000 or 40 Vdc is
required.
(-P7 for XLP models) Where a compliance rating of 1250
or 25 Vdc is required.
Standard Calibration
The nominal point at which a transducer is adjusted.
Surge Withstand
A measure of a transducers ability to withstand high-voltage,
high-frequency transients of short duration without damage.
Response Time
The time for a transducer output signal to reach 99% of its
final value after a step change in the applied input. Typically
the response is an exponential curve.
Ripple
The magnitude of ac fluctuations in a dc signal, after filtering.
Usually expressed as a percentage of rated output.
Transducer
A device for converting an electrical signal into a usable
direct current or voltage for measurement purposes.
Root-Mean-Square (RMS)
The effective value of alternating current or voltage. The RMS
value equates an ac signal to a dc signal that provides the
same power transfer.
Transformer Factor
The product of the current transformer ratio (CTR) and the
voltage transformer ratio (VTR). Also called the power ratio.
Unbalanced Loads
Refers to an unequal loading of the phases in a polyphase
system (current and/or phase angle).
Unidirectional Unit
A unidirectional unit allows inputs to be measured in
one direction only. The stated output range (for example,
420 mAdc) indicates the minimum and maximum input levels.
Voltage Transformer (VT)
Transformer used to accurately scale ac voltages up
or down, or to provide isolation. Generally used to scale large
primary or bus voltages to usable values for measuring
purposes.
Voltage Transformer Ratio (VTR)
The ratio of primary volts divided by secondary volts.
Zero-Based Output Calibration (-Z)
The -Z option applies only to P-Option units. The normal zero
point1, 4, or 10 mAdcis replaced with a 0 mAdc zero
point. For example, when a PAN7-Z unit is specified, the
output range of the unit will be 020 mAdc instead of
420 mAdc. The -Z option is not available with PAN-B models.
Phone: 1-800-274-5368
Fax: 585-454-7805
130
SCI Transducer Cat 90-134(MTD)
Stability
The ability of a transducer to maintain its performance
characteristics over a specified period of time.
Reading
The expected output at a given input value.
Reference
Phone: 1-800-274-5368
Fax: 585-454-7805
131
130-131
1/9/02, 5:35 PM
AC FORMULAS
Two-Phase* Four-Wire
Three-Phase
Direct Current
Formulas
I x E x PF
I x E x 2 x PF
I x E x 1.73 x PF
IxE
1000
1000
1000
1000
IxE
IxEx2
I x E x 1.73
1000
1000
1000
I x E x % Eff. x PF
I x E x 2 x % Eff. x PF
I x E x 1.73 x % Eff. x PF
I x E x % Eff.
746
746
746
746
kW x 1000
kW x 1000
kW x 1000
kW x 1000
E x PF
2 x E x PF
1.73 x E x PF
kVA x 1000
kVA x 1000
kVA x 1000
2xE
1.73 x E
hp x 746
hp x 746
hp x 746
hp x 746
E x % Eff. x PF
2 x E x % Eff. x PF
1.73 x E x % Eff. x PF
E x % Eff.
To Find
Kilowatts
Kilovolt-Amps
Horsepower (output)
STANDARD ABBREVIATIONS
Symbol or
Abbreviation
ampere (amp)*
alternating current
additional
adjustable/adjustment
amperehour (amphour)
auxiliary
American wire gauge
degree Celsius
calibration
counts per hour
current transformer
current transformer ratio
direct current
double-pole, double-throw
external
degree Fahrenheit
full scale
hour
horsepower
high voltage
Symbol or
Abbreviation
Hz
Ke
kHz
k
kV
kVA
kvar
kW
kWh
mA
ms
M
mV
MW
mW
PF
PKe
Unit or Term
hertz
secondary constant of
energy (watthours**/ pulse)
kilohertz
kilohm
kilovolt
kilovolt-ampere
kilovar
kilowatt
kilowatthour
milliampere
millisecond
megohm
millivolt
megawatt
milliwatt
ohm
power factor
primary constant of
energy (watthours**/pulse)
Symbol or
Abbreviation
RFI
RMS
RO
RPM
RTD
SPDT
std.
A
s
V
V
VA
VAh
var
varh
VT
VTR
W
Wh
Unit or Term
radio-frequency interference
root-mean-square
rated output
revolutions per minute
resistance temperature
detector
single-pole, double-throw
standard
microampere
microsecond
microvolt
volt*
volt-ampere (volt-amp)
volt-amperehour (volt-amphour)
volt-ampere reactive
varhour
voltage transformer
voltage transformer ratio
watt
watthour
CALIBRATION FORMULAS
Definitions and Formulas for Calibration of Watt/Watthour, Var/Varhour, and Volt-Amp/Volt-Amphour Transducers
cph = counts per hour; where a count is a contact transfer of a 3-wire (KYZ) output device (mercury-wetted relay or
solid-state). cph = Calibrating Watts (Vars or Volt-Amps) Ke
cph = (Calibrating Watts (Vars or Volt-Amps) x CTR x VTR) PKe
Phone: 1-800-274-5368
Fax: 585-454-7805
132
SCI Transducer Cat 90-134(MTD)
Reference
A
AC/ac
addl.
adj.
Ah
aux.
AWG
C
cal.
cph
CT
CTR
DC/dc
DPDT
ext.
F
F.S.
h
hp
HV
Unit or Term
Phone: 1-800-274-5368
Fax: 585-454-7805
133
132-133
1/9/02, 5:35 PM
AC FORMULAS
Two-Phase* Four-Wire
Three-Phase
Direct Current
Formulas
I x E x PF
I x E x 2 x PF
I x E x 1.73 x PF
IxE
1000
1000
1000
1000
IxE
IxEx2
I x E x 1.73
1000
1000
1000
I x E x % Eff. x PF
I x E x 2 x % Eff. x PF
I x E x 1.73 x % Eff. x PF
I x E x % Eff.
746
746
746
746
kW x 1000
kW x 1000
kW x 1000
kW x 1000
E x PF
2 x E x PF
1.73 x E x PF
kVA x 1000
kVA x 1000
kVA x 1000
2xE
1.73 x E
hp x 746
hp x 746
hp x 746
hp x 746
E x % Eff. x PF
2 x E x % Eff. x PF
1.73 x E x % Eff. x PF
E x % Eff.
To Find
Kilowatts
Kilovolt-Amps
Horsepower (output)
STANDARD ABBREVIATIONS
Symbol or
Abbreviation
ampere (amp)*
alternating current
additional
adjustable/adjustment
amperehour (amphour)
auxiliary
American wire gauge
degree Celsius
calibration
counts per hour
current transformer
current transformer ratio
direct current
double-pole, double-throw
external
degree Fahrenheit
full scale
hour
horsepower
high voltage
Symbol or
Abbreviation
Hz
Ke
kHz
k
kV
kVA
kvar
kW
kWh
mA
ms
M
mV
MW
mW
PF
PKe
Unit or Term
hertz
secondary constant of
energy (watthours**/ pulse)
kilohertz
kilohm
kilovolt
kilovolt-ampere
kilovar
kilowatt
kilowatthour
milliampere
millisecond
megohm
millivolt
megawatt
milliwatt
ohm
power factor
primary constant of
energy (watthours**/pulse)
Symbol or
Abbreviation
RFI
RMS
RO
RPM
RTD
SPDT
std.
A
s
V
V
VA
VAh
var
varh
VT
VTR
W
Wh
Unit or Term
radio-frequency interference
root-mean-square
rated output
revolutions per minute
resistance temperature
detector
single-pole, double-throw
standard
microampere
microsecond
microvolt
volt*
volt-ampere (volt-amp)
volt-amperehour (volt-amphour)
volt-ampere reactive
varhour
voltage transformer
voltage transformer ratio
watt
watthour
CALIBRATION FORMULAS
Definitions and Formulas for Calibration of Watt/Watthour, Var/Varhour, and Volt-Amp/Volt-Amphour Transducers
cph = counts per hour; where a count is a contact transfer of a 3-wire (KYZ) output device (mercury-wetted relay or
solid-state). cph = Calibrating Watts (Vars or Volt-Amps) Ke
cph = (Calibrating Watts (Vars or Volt-Amps) x CTR x VTR) PKe
Phone: 1-800-274-5368
Fax: 585-454-7805
132
SCI Transducer Cat 90-134(MTD)
Reference
A
AC/ac
addl.
adj.
Ah
aux.
AWG
C
cal.
cph
CT
CTR
DC/dc
DPDT
ext.
F
F.S.
h
hp
HV
Unit or Term
Phone: 1-800-274-5368
Fax: 585-454-7805
133
132-133
1/9/02, 5:35 PM
Quotes
Contact your local representative for pricing and delivery estimates.
Payment Terms
Standard terms of payment are net thirty (30) days from date of invoice.
Warranty
Seller warrants its Equipment to meet applicable specifications, if any, and to be free from defects in material
and workmanship for a period of one (1) year from date of shipment to the original Purchaser, provided that such
warranty shall be for a period of (a) two (2) years from the date of shipment for the Exceltronic II XLG product and
(b) three (3) years from the date of shipment for the Exceltronic XL and Digilogic DL products. Upon receipt of
prompt notice from Purchaser, referencing the order number and detailing the claimed nonconformity or defect,
Seller shall, at its option, repair or replace the Equipment. Equipment returned to Seller will only be accepted with
a Returned Materials Authorization number (RMA) issued by Seller or one of its authorized representatives.
Inbound shipping charges to Sellers factory in Rochester, New York, or other designated facility, are the
responsibility of Purchaser. Normal shipping charges for the return to Purchaser of repaired or replacement
Equipment shall be the responsibility of the Seller (North American points only).
Repair or replacement of the Equipment in the manner described above is the exclusive warranty remedy and shall
constitute complete fulfillment of all Sellers liabilities for breach of this Warranty. Seller assumes no responsibility
hereunder for any Equipment damage or failure caused by (a) improper installation, operation, and maintenance of
the Equipment, or (b) normal wear and tear on disposable and/or consumable parts. This Warranty shall be void in
the event of unauthorized modification or servicing of the Equipment.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF QUALITY, WHETHER
EXPRESSED OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE). In no event shall Seller be liable hereunder for any special, indirect, incidental, or consequential
damages including but not limited to loss of revenue or production.
Exceltronic is a Registered Trademark of Scientific Columbus Co.
Copyright 1995 Scientific Columbus Co. All rights reserved.
Delivery
Standard delivery is via UPS, F.O.B. shipping point (Rochester, New York). Express delivery can be made via
either UPS or Federal Express. Shipments over 150 pounds are made via Yellow Freight or Overnight Transportation.
All delivery charges are automatically added to your invoice.
Returns
If it is necessary to return Scientific Columbus products for repair or calibration, contact either your local
representative or the factory at 1-800-274-5368 (U.S. and Canada).
Phone: 1-800-274-5368
Fax: 585-454-7805
134
SCI Transducer Cat 90-134(MTD)
134
1/9/02, 5:35 PM
Ametek Transducer
Comp MTD1
1/9/02
5:10 PM
Page 1
SCIENTIFIC
COLUMBUS
SCIENTIFIC COLUMBUS
Headquarters
Rochester Factory
50 Fordham Road
Wilmington, Massachusetts 01887
Tel: 978-988-4101
Fax: 978-988-4179
Email: power.industrial@ametek.com
2 Queens Drive
Kings Norton Business Centre
Birmingham B30 3HH England
Tel: +44 121 246 2260
Fax: +44 121 246 2270
W W W. S C I E N T I F I C C O L U M B U S . C O M