Académique Documents
Professionnel Documents
Culture Documents
LM1117/LM1117I
800mA Low-Dropout Linear Regulator
General Description
Features
Applications
n
n
n
n
n
Typical Application
Active Terminator for SCSI-2 Bus
10091905
10091928
DS100919
www.national.com
April 2006
LM1117/LM1117I
Ordering Information
Package
3-lead
SOT-223
Temperature
Range
Part Number
Packaging Marking
Transport Media
NSC
Drawing
0C to +125C
LM1117MPX-ADJ
N03A
MP04A
LM1117MPX-1.8
N12A
40C to +125C
3-lead TO-220
3-lead TO-252
0C to +125C
0C to +125C
40C to +125C
8-lead LLP
0C to +125C
40C to 125C
TO-263
www.national.com
0C to +125C
LM1117MPX-2.5
N13A
LM1117MPX-2.85
N04A
LM1117MPX-3.3
N05A
LM1117MPX-5.0
N06A
LM1117IMPX-ADJ
N03B
LM1117IMPX-3.3
N05B
LM1117IMPX-5.0
N06B
LM1117T-ADJ
LM1117T-ADJ
Rails
LM1117T-1.8
LM1117T-1.8
Rails
Rails
LM1117T-2.5
LM1117T-2.5
LM1117T-2.85
LM1117T-2.85
Rails
LM1117T-3.3
LM1117T-3.3
Rails
LM1117T-5.0
LM1117T-5.0
Rails
LM1117DTX-ADJ
LM1117DT-ADJ
LM1117DTX-1.8
LM1117DT-1.8
LM1117DTX-2.5
LM1117DT-2.5
LM1117DTX-2.85
LM1117DT-2.85
LM1117DTX-3.3
LM1117DT-3.3
LM1117DTX-5.0
LM1117DT-5.0
LM1117IDTX-ADJ
LM1117IDT-ADJ
LM1117IDTX-3.3
LM1117IDT-3.3
LM1117IDTX-5.0
LM1117IDT-5.0
LM1117LDX-ADJ
1117ADJ
LM1117LDX-1.8
1117-18
LM1117LDX-2.5
1117-25
LM1117LDX-2.85
1117-28
LM1117LDX-3.3
1117-33
LM1117LDX-5.0
1117-50
LM1117ILDX-ADJ
1117IAD
LM1117ILDX-3.3
1117I33
LM1117ILDX-5.0
1117I50
LM1117SX-ADJ
LM1117SADJ
LM1117SX-2.85
LM1117S2.85
LM1117SX-3.3
LM1117S3.3
LM1117SX-5.0
LM1117S5.0
T03B
TD03B
LDC08A
TS3B
LM1117/LM1117I
Block Diagram
10091901
Connection Diagrams
TO-263
SOT-223
10091944
Top View
10091904
Top View
10091945
TO-220
Side View
LLP
10091902
Top View
TO-252
10091946
Top View
10091938
Top View
www.national.com
LM1117/LM1117I
260C, 10 sec
260C, 4 sec
20V
Internally Limited
2000V
15V
-65C to 150C
Lead Temperature
LM1117
0C to 125C
LM1117I
40C to 125C
VOUT
VOUT
Parameter
Reference Voltage
Output Voltage
Line Regulation
(Note 6)
www.national.com
Conditions
Min
(Note 5)
Typ
(Note 4)
Max
(Note 5)
Units
LM1117-ADJ
IOUT = 10mA, VIN-VOUT = 2V, TJ = 25C
10mA IOUT 800mA, 1.4V VIN-VOUT
10V
1.238
1.225
1.250
1.250
1.262
1.270
V
V
LM1117-1.8
IOUT = 10mA, VIN = 3.8V, TJ = 25C
0 IOUT 800mA, 3.2V VIN 10V
1.782
1.746
1.800
1.800
1.818
1.854
V
V
LM1117-2.5
IOUT = 10mA, VIN = 4.5V, TJ = 25C
0 IOUT 800mA, 3.9V VIN 10V
2.475
2.450
2.500
2.500
2.525
2.550
V
V
LM1117-2.85
IOUT = 10mA, VIN = 4.85V, TJ = 25C
0 IOUT 800mA, 4.25V VIN 10V
0 IOUT 500mA, VIN = 4.10V
2.820
2.790
2.790
2.850
2.850
2.850
2.880
2.910
2.910
V
V
V
LM1117-3.3
IOUT = 10mA, VIN = 5V TJ = 25C
0 IOUT 800mA, 4.75V VIN 10V
3.267
3.235
3.300
3.300
3.333
3.365
V
V
LM1117-5.0
IOUT = 10mA, VIN = 7V, TJ = 25C
0 IOUT 800mA, 6.5V VIN 12V
4.950
4.900
5.000
5.000
5.050
5.100
V
V
LM1117-ADJ
IOUT = 10mA, 1.5V VIN-VOUT 13.75V
0.035
0.2
LM1117-1.8
IOUT = 0mA, 3.2V VIN 10V
mV
LM1117-2.5
IOUT = 0mA, 3.9V VIN 10V
mV
LM1117-2.85
IOUT = 0mA, 4.25V VIN 10V
mV
LM1117-3.3
IOUT = 0mA, 4.75V VIN 15V
mV
LM1117-5.0
IOUT = 0mA, 6.5V VIN 15V
10
mV
(Continued)
Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C.
Symbol
VOUT
Typ
(Note 4)
Max
(Note 5)
Units
0.2
0.4
LM1117-1.8
VIN = 3.2V, 0 IOUT 800mA
10
mV
LM1117-2.5
VIN = 3.9V, 0 IOUT 800mA
10
mV
LM1117-2.85
VIN = 4.25V, 0 IOUT 800mA
10
mV
LM1117-3.3
VIN = 4.75V, 0 IOUT 800mA
10
mV
Parameter
Load Regulation
(Note 6)
Min
(Note 5)
Conditions
LM1117-ADJ
VIN-VOUT = 3V, 10 IOUT 800mA
LM1117-5.0
VIN = 6.5V, 0 IOUT 800mA
VIN-V OUT
15
mV
Dropout Voltage
(Note 7)
IOUT = 100mA
1.10
1.20
IOUT = 500mA
1.15
1.25
Current Limit
Minimum Load
Current (Note 8)
LM1117-ADJ
VIN = 15V
Quiescent Current
IOUT = 800mA
ILIMIT
1.20
1.30
1200
1500
mA
1.7
mA
LM1117-1.8
VIN 15V
10
mA
LM1117-2.5
VIN 15V
10
mA
LM1117-2.85
VIN 10V
10
mA
LM1117-3.3
VIN 15V
10
mA
800
LM1117-5.0
VIN 15V
Thermal Regulation
Ripple Regulation
10 IOUT 800mA,
1.4V VIN-VOUT 10V
Temperature Stability
60
10
mA
0.01
0.1
%/W
75
dB
60
120
0.2
0.5
0.3
TA = 125C, 1000Hrs
0.003
Thermal Resistance
Junction-to-Case
3-Lead SOT-223
15.0
C/W
3-Lead TO-220
3.0
C/W
Thermal Resistance
Junction-to-Ambient
(No air flow)
3-Lead TO-252
10
C/W
136
C/W
79
C/W
92
C/W
3-Lead TO-263
55
C/W
40
C/W
www.national.com
LM1117/LM1117I
LM1117/LM1117I
VOUT
VOUT
VOUT
Conditions
Min
(Note 5)
Typ
(Note 4)
Max
(Note 5)
Units
LM1117I-ADJ
IOUT = 10mA, VIN-VOUT = 2V, TJ = 25C
10mA IOUT 800mA, 1.4V VIN-VOUT
10V
1.238
1.200
1.250
1.250
1.262
1.290
V
V
LM1117I-3.3
IOUT = 10mA, VIN = 5V, TJ = 25C
0 IOUT 800mA, 4.75V VIN 10V
3.267
3.168
3.300
3.300
3.333
3.432
V
V
LM1117I-5.0
IOUT = 10mA, VIN = 7V, TJ = 25C
0 IOUT 800mA, 6.5V VIN 12V
4.950
4.800
5.000
5.000
5.050
5.200
V
V
Parameter
Reference Voltage
Output Voltage
Line Regulation
(Note 6)
Load Regulation
(Note 6)
LM1117I-ADJ
IOUT = 10mA, 1.5V VIN-VOUT 13.75V
0.035
0.3
LM1117I-3.3
IOUT = 0mA, 4.75V VIN 15V
10
mV
LM1117I-5.0
IOUT = 0mA, 6.5V VIN 15V
15
mV
0.2
0.5
15
mV
LM1117I-ADJ
VIN-VOUT = 3V, 10 IOUT 800mA
LM1117I-3.3
VIN = 4.75V, 0 IOUT 800mA
LM1117I-5.0
VIN = 6.5V, 0 IOUT 800mA
VIN-V OUT
ILIMIT
Dropout Voltage
(Note 7)
20
mV
IOUT = 100mA
1.10
1.30
IOUT = 500mA
1.15
1.35
IOUT = 800mA
1.20
1.40
1200
1500
mA
Current Limit
800
Minimum Load
Current (Note 8)
LM1117I-ADJ
VIN = 15V
1.7
mA
Quiescent Current
LM1117I-3.3
VIN 15V
15
mA
LM1117I-5.0
VIN 15V
Thermal Regulation
Ripple Regulation
15
mA
0.1
%/W
75
dB
60
120
10 IOUT 800mA,
1.4V VIN-VOUT 10V
0.2
10
0.5
TA = 125C, 1000Hrs
0.3
Temperature Stability
Long Term Stability
60
5
0.01
0.003
Thermal Resistance
Junction-to-Case
3-Lead SOT-223
15.0
C/W
3-Lead TO-252
10
C/W
Thermal Resistance
Junction-to-Ambient
No air flow)
136
C/W
92
C/W
40
C/W
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
www.national.com
Note 3: For testing purposes, ESD was applied using human body model, 1.5k in series with 100pF.
Note 4: Typical Values represent the most likely parametric norm.
Note 5: All limits are guaranteed by testing or statistical analysis.
Note 6: Load and line regulation are measured at constant junction room temperature.
Note 7: The dropout voltage is the input/output differential at which the circuit ceases to regulate against further reduction in input voltage. It is measured when the
output voltage has dropped 100mV from the nominal value obtained at VIN = VOUT +1.5V.
Note 8: The minimum output current required to maintain regulation.
Note 9: Minimum pad size of 0.038in2
Note 10: Thermal Performance for the LLP was obtained using JESD51-7 board with six vias and an ambient temperature of 22C. For information about improved
thermal performance and power dissipation for the LLP, refer to Application Note AN-1187.
OUT)
Short-Circuit Current
10091922
10091923
Load Regulation
10091943
10091906
www.national.com
LM1117/LM1117I
Note 2: The maximum power dissipation is a function of TJ(max) , JA, and TA. The maximum allowable power dissipation at any ambient temperature is
PD = (TJ(max)TA)/JA. All numbers apply for packages soldered directly into a PC board.
LM1117/LM1117I
(Continued)
Temperature Stability
10091925
10091907
10091926
10091908
10091909
www.national.com
10091910
LM1117/LM1117I
(Continued)
10091911
Application Note
1.0 EXTERNAL CAPACITORS/STABILITY
1.1 Input Bypass Capacitor
An input capacitor is recommended. A 10F tantalum on the
input is a suitable input bypassing for almost all applications.
1.2 Adjust Terminal Bypass Capacitor
The adjust terminal can be bypassed to ground with a bypass capacitor (CADJ) to improve ripple rejection. This bypass capacitor prevents ripple from being amplified as the
output voltage is increased. At any ripple frequency, the
impedance of the CADJ should be less than R1 to prevent the
ripple from being amplified:
1/(2*fRIPPLE*CADJ) < R1
The R1 is the resistor between the output and the adjust pin.
Its value is normally in the range of 100-200. For example,
with R1 = 124 and fRIPPLE = 120Hz, the CADJ should be >
11F.
10091917
www.national.com
LM1117/LM1117I
Application Note
(Continued)
10091918
10091915
10091919
R CA (Application
Variables)
Placement of Mounting
Pad
Die Size
10
(Continued)
The next parameter which must be calculated is the maximum allowable temperature rise, TR(max):
TR(max) = TJ(max)-TA(max)
where TJ(max) is the maximum allowable junction temperature (125C), and TA(max) is the maximum ambient temperature which will be encountered in the application.
Using the calculated values for TR(max) and PD, the maximum allowable value for the junction-to-ambient thermal
resistance (JA) can be calculated:
JA = TR(max)/PD
10091937
10091916
Copper Area
Thermal Resistance
(JA,C/W) SOT-223
(JA,C/W) TO-252
0.0123
136
103
0.066
123
87
0.3
84
60
0.53
75
54
0.76
69
52
66
47
0.2
115
84
0.4
98
70
0.6
89
63
10
0.8
82
57
11
79
57
12
0.066
0.066
125
89
13
0.175
0.175
93
72
11
www.national.com
LM1117/LM1117I
Application Note
LM1117/LM1117I
Application Note
(Continued)
TABLE 1. JA Different Heatsink Area (Continued)
Layout
Copper Area
Thermal Resistance
14
0.284
0.284
83
61
15
0.392
0.392
75
55
16
0.5
0.5
70
53
www.national.com
12
LM1117/LM1117I
Application Note
(Continued)
10091936
10091913
10091914
10091934
10091912
10091935
13
www.national.com
LM1117/LM1117I
Application Note
(Continued)
10091941
FIGURE 13. Top View of the Thermal Test Pattern in Actual Scale
www.national.com
14
LM1117/LM1117I
Application Note
(Continued)
10091942
FIGURE 14. Bottom View of the Thermal Test Pattern in Actual Scale
15
www.national.com
LM1117/LM1117I
10091927
10091930
10091931
10091929
www.national.com
16
LM1117/LM1117I
(Continued)
10091932
10091933
17
www.national.com
LM1117/LM1117I
Physical Dimensions
3-Lead SOT-223
NS Package Number MP04A
3-Lead TO-220
NS Package Number T03B
www.national.com
18
LM1117/LM1117I
Physical Dimensions
3-Lead TO-263
NS Package Number TS3B
19
www.national.com
LM1117/LM1117I
Physical Dimensions
3-Lead TO-252
NS Package Number TD03B
8-Lead LLP
NS Package Number LDC08A
www.national.com
20
Notes
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONALS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Franais Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Support Center
Email: ap.support@nsc.com
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: jpn.feedback@nsc.com
Tel: 81-3-5639-7560
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Amplifiers
amplifier.ti.com
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP Products
www.dlp.com
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Microcontrollers
microcontroller.ti.com
RFID
www.ti-rfid.com
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
www.ti.com/video
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright 2011, Texas Instruments Incorporated