Académique Documents
Professionnel Documents
Culture Documents
SDC
PUBLICATIONS
2012
Design analysis
SDC
PUBLICATIONS
2012
Linear
Elastic
region
Yield
Point
SDC
PUBLICATIONS
2012
Elastic
Plastic
STRAIN
SDC
PUBLICATIONS
2012
Problem Statement
Determine the maximum normal stress that loading produces in
the aluminum plate.
SDC
PUBLICATIONS
2012
Preliminary Analysis
The nominal normal stress developed at the smallest cross section
(through the center of the hole) in the plate is
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
1. Preliminary Analysis.
2. Preparation of the finite element model:
a. Model the problem into finite elements.
b. Prescribe the geometric and material information of the system.
c. Prescribe how the system is supported.
d. Prescribe how the loads are applied to the system.
3.Perform calculations:
a. Generate a stiffness matrix of each element
b. Assemble the individual stiffness matrices to obtain the overall, or
global, stiffness matrix.
c. Solve the global equations and compute displacements, strains, and
stresses.
4. Post-processing of the results:
a. Viewing the stress contours and the displaced shape.
b. checking any discrepancy between the preliminary analysis results
and the FEA results.
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
Apply Constraints
SDC
PUBLICATIONS
2012
Applying Load
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
SDC
PUBLICATIONS
2012
Comparison of Results
SDC
PUBLICATIONS
2012