Académique Documents
Professionnel Documents
Culture Documents
ruler
pencil with rubber eraser
scissors
pins
12. Cut the final pattern along the seam allowance, NOT on the stitch-line.
13. For the extended facing on the front opening, Shape it by measuring 2 inches from
the centerfold of the waist level and connect this with a concave part of the hip curve
to the point on the neck-shoulder line around 1 inch from the neck-shoulder-point.
Square down to the hemline the 2 inches point adjustment on the waist level.
BACK BLOUSE PATTERN
1. Fold pattern paper on the centerline. The folded paper should be as big as the cut
front blouse pattern excluding the facing.
2. Position the back bodice along the centerfold and 1 inch from the upper edge.
3. Do the same shoulder-neck-point adjustment [ inch] and leave the back centerneck-point as is.
4. Do the same adjustment of the front pattern for the back side, hip, and hemline. But
exclude the or inch downward adjustment. Back hemline is straight.
5. Make sure that the back and front pattern should match on the side seam, shoulder
seam, and hipline.
6. Add the necessary seam allowances.
7. Cut the final pattern
8. Remember to cut along the seam allowance NOT on the stitch-line.