Académique Documents
Professionnel Documents
Culture Documents
Concept review
This first lab will introduce you to some of the basics of configuring a router or a switch. The are few
difference between routers and switches for most of the basic configuration commands. These
commands include configuring the following items:
Console Password
Telnet Password
Secret Password
IP address
The console port is generally used for administrative purposes when a technician is onsite.
Telnet passwords (or more correctly the vty password) is set for telnet or SSH access.
The secret password is used to restrict access to the privileged mode
Refer to Chapters 8 and 9 in the ICND1 book for more details.
Lab Diagram
switch1
Switch2
Command Prompts
While doing the lab, please look at the prompts-the prompts tell you what commands will be available.
For example, the prompt can help you differentiate between user mode, privileged mode, global config
mode and line config mode.
See the Command Prompt handout for more examples.
Page 1 of 4
Configurations
For this lab, you should access one of the switches and configure it with the following information:
Hostname: Lab1-Switch
Console Pasword: faith
Vty Password: hope
Secret Password: cisco
IP address: 172.16.10.1 255.255.255.0
If you need help, see the detailed instructions below.
Page 3 of 4
Page 4 of 4