Académique Documents
Professionnel Documents
Culture Documents
Setup Guide
Website: www.dinstar.com
Type the username and password for an administrative user into the Username and Password
fields
A2 Press Enter or click on the Submit button to go to Elastixs Dashboard
A3 Once inside, click on the PBX tab on the menu at the top of the screen
A4 Click Trunks and Add SIP Trunk menu to create a SIP trunk to DWG. This will take you to
the Add SIP Trunk page.
Outgoing settings
Incoming Settings
A6 Configure outbound route On the Add Outbound Routes page, fill in the following
information:
Select the firmware file and click Upload button then keep waiting till it reboot automatically.
B2 Configure SIP server IP on the System Configuration-> SIP Parameter page
Note: s can be replaced by extensions or other DID number as per configuration of SIP
server. To call to extension/DID number automatically, users must configure To VoIP Hotline as
well as Tel-IP Operation.
B4 Configure outbound route on the Call & Routing ->IP_Tel Routing page