Académique Documents
Professionnel Documents
Culture Documents
BY
PROFESSIONAL
PRODUCTS...
PROFESSIONAL PRODUCTS...
PROFESSIONAL SOLUTIONS...
PROFESSIONAL
SOLUTIONS...
PROFITABLE
PREVENTATIVE
MAINTENANCE...
SUPPLIERS OF
CUSTOMER
R ETENTION
PROGRAMMES
PROUD SPONSORS OF
THE BEST GARA GE GUIDE...
BY
BG Products
BG Products were founded in 1971. Their
goal was, and still is, to produce the best
products in their class.
BG have worked with many of the worlds
OEMs to provide solutions to the deposit
and lubrication challenge that modern engines create.
BG Quality
BG Products quality is rooted in the challenge that modern engines provide. Modern engines are
very susceptible to the deposits created by the demands of emissions control devices and tighter
engineering tolerances demanded by higher output, lower emissions units.
The BG Difference
BG set out to make the best products in their class. For instance
many fuel system cleaners can clean injectors and some can
even clean some soft baked carbon. BG fuel system cleaners contain more of the chemistry
recommended by the engine manufacturers themselves to remove the hard baked deposits, that
interfere with efficient flow of air and fuel, throughout the entire system.
BG continue to work with many OEMs to find solutions to the inevitable problems that deposits create.
Pre Treatment
Injectors
Valve
Egr
Piston Crown
Air Intake
Post Treatment
Registered No. 3871787 Registered Address: ASK House, Northgate Avenue, Bury St Edmunds, Suffolk IP32 6BB
Email: info@bgprod.co.uk
2
DOC
DOC for diesel engine oil is a
revolutionary product
designed especially for todays
modern high-output diesel
engines. DOC maintains likenew diesel engine power and
performance, neutralises acids
and acid corrosion, reduces
friction and wear on engine
parts, stabilizes viscosity,
prevents sludge through
increased oxidation and
soot control.
BG Compression
Restorer
Compression Performance
Restoration is a revolutionary
formula with proven ringclean technology. It is a
quick and effective blend of
cleaners that will soften,
emulsify and dissolve those
hard to remove fuel gums
that clog rings and will
usually do it in 15 minutes
or less.
#112
#109
MOA
BG Compression
Restorer
Compression Performance
Restoration is a revolutionary
formula with proven ringclean technology. It is a
quick and effective blend of
cleaners that will soften,
emulsify and dissolve those
hard to remove fuel gums
that clog rings and will
usually do it in 15 minutes or
less.
#109
#110
www.bgprod.co.uk
or call 01284 777934
Supercharge II
#203
BG 248
Diesel Fuel
Conditioner
#2276
#248
BG Quick Clean
BG Throttle Body/
Air Intake /EGR
Valve Cleaner
For Engines
Restores power and performance to your engine by
rapidly and effectively removing accumulated deposits
that form in the piston ring belt, hydraulic lifters, rocker
arms and other critical engine parts. Add BG Quick
Clean to the oil, then run engine for 10-15 minutes.
When the old oil is drained, contaminants are quickly
flushed away.
#105
BG RF-7
A specially developed formula for engine oil which
helps increase engine compression and power by
increasing the viscosity of the oil. It also helps seal
rings to increase compression. BG RF-7 contains
additives which keep the engine oil from oxidizing or
thickening It will help reduce oil use and exhaust
smoke and will reduce lifter and valve noise.
#4073
#107
Registered No. 3871787 Registered Address: ASK House, Northgate Avenue, Bury St Edmunds, Suffolk IP32 6BB
Email: info@bgprod.co.uk
4
BG Diesel
Induction System
Cleaner
A strong and effective induction
system cleaner for diesels.
Cleans the entire intake system
and EGR circuit. Part of the
complete Diesel Performance
Restoration Service. Complete
service cleans Intake, EGR
Circuit, Intake Valves and DPF.
See Page 6
#255 (Diesel)
BG Air Intake
System Cleaners
BG ISC Induction
System Cleaner
BG Petrol Injection
System Cleaner
BG Diesel Injection
System Cleaner
#210 (Petrol)
#229 (Diesel)
BG Universal Cooling
System Sealer
BG Universal Cooling
System Cleaner
BG GDi
Intake Valve
Cleaning
2 Part Kit for cleaning
GDi/FSi intake valves.
271 soaks into the
carbon, softening in
preparation for
carbon removal. 272
rinses the valve clean.
#271
See Page 7
#272
BG Universal
Super Cool
Coolant additive is specially
formulated for use in conventional,
long life, hybrid and heavy duty
coolants. It provides outstanding
protection for all metals utilized in
modern automotive cooling systems.
It has excellent corrosion inhibitors,
anti-foam capabilities, and is
biodegradable in its unused form.
#5468
www.bgprod.co.uk
or call 01284 777934
5
Post Treatment
Engines, by their very nature, create deposit problems in many of different areas.
Emissions control devices such as EGR valves and PCV valves increase the amount of deposit in
the Air Intake and into the combustion chamber.
Deposits here severely restrict the volume of air moving through
the engine
It is critical to keep the injectors and air
fuel mixture functioning as efficiently as
possible
When the engine is running inefficiently
it will produce more particulate matter
which in turn shortens the life of EGR
valves and *DPFs (*Diesels only)
Pre Service
Post Service
The BG Air/Fuel Induction Service Cleans Air Intake - Fuel Injectors - Intake Valves,
Piston Rings - EGR Circuit* and DPFs* (*Diesel Service Only)
An amazing difference in performance ( Andy Wright, Wright Tech)
The cars are like chalk and cheese (Neil Hutchinson, Mercury Cars)
Registered No. 3871787 Registered Address: ASK House, Northgate Avenue, Bury St Edmunds, Suffolk IP32 6BB
Email: info@bgprod.co.uk
6
Poor Atomisation
Good Atomisation
Pre Service
Post Service
To place an order or see more
superior quality products visit our website:
www.bgprod.co.uk
or call 01284 777934
7
BG Manual Gear
Fluid Exchange
Easy to use gearoil
exchange system.
Tough Sell?
GREAT BRITAIN
Third
6-1
draft
Drive Line Rear Differential: Covers only the lubricated parts contained within the rear
differential housing or case. Items not covered are the rear differential housing or case,
axle(s), pre-packed axle bearing(s), U-joints(s) and CV joint(s) unless damaged due to failure
of covered part.
Drive Line Transfer Case: Covers only the lubricated parts contained within the transfer case.
Items not covered are the housing or case, U-joint(s), CV joint(s) and driveshaft(s) unless
damaged due to failure of covered part.
Drive Line Manual Transmission/Transaxle: Covers only the lubricated parts contained within
the transmission case. Items not covered are the case, flywheel, clutch plate, pressure plate,
U-joint(s), CV joint(s) and driveshaft(s) unless damaged due to failure of covered parts.
Power Steering: Covers only the power steering gear box or rack and power steering pump.
Items not covered are hoses, belts, brackets, seals and leaking gaskets.
Brake System: Covers only the pump, valves, master cylinder, calipers, and metalized hoses.
Items not covered are pads, rotors, shoes, ABS sensors, controller or other electrical parts.
Engine (gasoline and diesel):
Pistons and Rings
Timing Chains*
Cam Shafts and Bearings
Timing Gears or Sprockets
Turbo Bearings
Rods and Rod Bearings
Valve Lifters
Intake Valves and Guides**
Oil Pump
Cylinder Liners or Bores
Wrist Pins and Bushings
Rocker Arms and Pivots
Push Rods
Distributor Drive Gear
Crankshaft and Bearings
Fuel:
Oxygen Sensors
PCV
Injectors (Deposit-related malfunctions only)
*Timing belts and damage to engine parts due to broken timing belts excluded.
**Grinding adjustments excluded.
D. Conditions and Exclusions of This Protection Plan
If the vehicle odometer has been changed or altered, or if odometer has ceased to function, coverage
under the terms of this Protection Plan are not in effect. This Protection Plan covers only legally
registered passenger cars, vans, SUVs and pick-up trucks with a GVW of 4,300 kg or less. Motorcycles,
RVs, and vehicles with more than two axles are excluded. Vehicles used for competitive purposes are
excluded. This service excludes in-house maintenance/repair facilities. In the case of a leased vehicle,
the lessee must be primarily obligated for repairs and maintenance. If covered vehicle is used for towing
a trailer or other vehicle or object, this Protection Plan is not in effect unless covered vehicle is equipped
with professionally or factory-installed tow package and is TUV approved and cooling system has been
modified to the OE specification. Any claim resulting from collision, fire, theft, vandalism, contamination
of fluids, acts of God, misuse, abuse, negligence, lack of normal maintenance required by vehicle
manufacturer renders this Protection Plan null and void. Pre-existing conditions, damage to system
components prior to the service are excluded and may be verified through independent parts analysis at
the discretion of BG Products, Inc. To keep this Protection Plan in effect you must keep all receipts and
Repair Orders for maintenance and services required by this Protection Plan. Failure to furnish all
necessary records will render this Protection Plan null and void.
E. Claims and Repair Procedures
In the event of a claim, the vehicle must be returned to an authorized professional service center where
the BG service was performed.
You must provide the designated claims administrator with information from all of the following:
1. All service Repair Orders as of January 1, 2010, including all applicable BG Part Numbers stated
in Section A, showing compliance with the terms and conditions of this Protection Plan for each
component covered, e.g., automatic transmission, front differential, rear differential, transfer case,
manual transmission/transaxle, power steering, brake system, engine. Repair Orders must
include the following information: Repair Order number, Repair Order date, current odometer
reading, Vehicle Indentification Number (VIN), vehicle year, vehicle make, vehicle model, labor
rate per hour, BG Part Numbers of products used in the service.
2. Lease agreement if vehicle is leased.
3. A complete statement of damage and estimated repair costs.
If required, you must ship the damaged parts, as well as a representive pint sample of vehicle fluid
involved with the damaged parts, to:
BG Products, Inc., Laboratory
701 S. Wichita St.
Wichita, KS 67213 USA
Protection
Plan
Certificates
Given to
customer to
let them
know that
they have a Protection Plan and
that if they renew it they will be
covered all the way up to
150,000 miles
Plan 1 (0 60,000 km initial service):
The initial service(s) must have been performed within 60,000 km, as shown on the odometer.
Protection is not to exceed seven (7) years from model date of the vehicle, or 240,000 km,
whichever occurs first.
Plan 2 (60,00080,000 km initial service):
The initial service(s) must have been performed between 60,000 km, and 80,000 km, as
shown on the odometer. Protection is not to exceed seven (7) years from model date, or
240,000 km, whichever occurs first. This Protection Plan will take effect 800 km after the first
BG Service(s) has been performed by a professional technician.
This Protection Plan for Automatic Transmissions, Front Differentials, Rear Differentials,
Transfer Cases, Manual Transmissions, Transaxles, Power Steering and/or Brake will be
continued by the performance of the proper BG Service within 50,000 km of the previous service.
This Protection Plan for Engine and Fuel (gasoline and diesel) will be continued by the performance of
the BG Service within 20,000 km of the previous service. BG 208 is the required gasoline fuel treatment.
However, BG 203 may be used as the gasoline fuel treatment instead of BG 208 if a second BG 203 fuel
treatment is added at 10,000 km. From the date of your Protection Plan enrollment, the vehicles engine
must be serviced only with the proper grade and weight of engine oil, recommended by the vehicle
manufacturer. Timing belt and air and oil filter must be replaced and emission control system maintained in
accordance with vehicle manufacturers recommendations.
All services referred to in Section A must be performed by an authorized professional service center. You
may not change your own oil. Reclaimed or recycled oil may not be used. All fluids used in covered
components must meet vehicle manufacturers specifications.
In the event of a claim, you must provide BG Products, Inc., with satisfactory evidence, according to
Section E, that all of the required services referred to in Section A were performed.
A professional technician must perform an approved BG maintenance procedure using proper BG products
and equipment. A grace period of 800 km will be extended in order to stay within service interval
compliance, including initial service.
C. Covered
Payment of claims under this Protection Plan is limited to the labor time necessary to make repairs or to
replace any irreparably damaged parts as allocated by Motor or Mitchell Flat Rate Guide or other industry
accepted flat rate guide, multiplied by the commercial repair shops posted hourly labor rate, plus the
reasonable cost of replaced parts of like kind and quality at the administrators discretion.
This BG Protection Plan covers:
Automatic Transmission: Covers only the lubricated parts contained within the transmission
housing or case only when damaged by an internally lubricated part covered under this Protection
Plan. Items not covered are leaking transmission seals and gaskets. Proper fluids meeting vehicle
manufacturers specifications must be used.
Drive Line Front Differential: Covers only the lubricated parts contained within the front
differential housing or case. Items not covered are the front differential housing or case,
pre-packed axle bearing(s), U-joint(s), CV joint(s) and boot(s) unless damaged due to failure of
covered part.
Customer Additional
Service Option Sheet
copyright 2010 BG Products, Inc. s Wichita, Kansas 67213 s www.bgprod.com s BG No. 1970GB
www.bgprod.co.uk
or call 01284 777934
9
BG Quick Clean
For Power Steering
A safe, fast flush for power
steering systems. It will
effectively remove
accumulated residues from
the entire power steering
system, including pumps,
lines, racks and valves.
Use in conjunction with
BG Power Steering
Service Center.
#108
BG Power Steering
Flush Fluid
BG Power Steering
Conditioner
BG ATC Plus
BG Universal
Synthetic ATF
Provides excellent protection of
gears and offers superior thermal
stability, anti-wear protection,
outstanding oxidative stability,
foam resistance and corrosion
control, exceptional low
temperature fluidity, and excellent
shear stability to ensure a long life.
#312
BG In-Force
An ion-activated penetrating oil
which stops rust, and lubricates and
frees rusted parts. It can also be
used in assembly applications.
When bonded to metal, it forms a
protective coating and lubricating
surface which is enhanced by other
lubricants and corrosion inhibitors.
#330
BG MGC
BG CVT
Conditioner
Conditioner for CVT
transmission. Smoothes gear
changes protects against
wear
#302
BG White Lithium
Grease
Special lithium base lubricant
packaged. It is fortified with additives
to help protect tagainst rust and
oxidation problems.
#480
#438
BG Frigi-Fresh
Contains anti-oxidants,
dispersants and anti-wear
ingredients. Maintains fluid
condition, system cleanliness
and prevent noise and
excessive wear
BG Universal
Frigi-Quiet
A revolutionary compressor lubricant
that enhances cooling, under the
harshest of conditions. Using unique,
ashless anti-wear technology, it
ensures quieter, cooler compressor
operation and prolongs life.
Compatible with all AC oils and
contains tracer dye.
100% compatible with mineral
oil, PAG and Ester lubricants. #7018
#792
BG Stop Squeal
Most brake noise is caused by
vibrations that occur when
pressure is applied. BG Stop
Squeal impregnates the brake
pad with ingredients that reduce
sticking between the pad and
rotor. When pressure is applied,
the vibrations are significantly
reduced, thus noise is stopped.
Registered No. 3871787 Registered Address: ASK House, Northgate Avenue, Bury St Edmunds, Suffolk IP32 6BB
Email: info@bgprod.co.uk
10
#860
Before
Dieselcare
BG In-force
Regarded by many as
the best lubricating
penetrating oil ion
activated to give
superior adherence.
Used in marine,
industrial, construction
as well as automotive
applications, to unsieze and protect the
most stubborn joints.
#22932
#438
Advanced waterproof
grease in an aerosol.
Protects to 260C. Protects
against corrosive action
of fresh and salt water.
Resists fertiliser corrosion.
197 HP
PTO Speed
203.2 HP
190.9 HP
198.9 HP
Max Power
205 HP
Conditioner treats
1:10000. Extremely
cost effective
preventative
maintenance for
stopping deposit build
up caused by
agricultural diesel.
Restores lubricity lost by
sulphur removal. #227
24432
#498
Diesel Thaw
After
BGHCF
Grease
BGHCF
Sprayable
Grease
Rating
#605
BGSS2000
Grease
BG
Chain Lube
A multi function
Diesel Fuel
Conditioner for all
weathers.Inhibits
build up of deposits
plus lowers waxing
point of diesel by an
average of 10c.
#495
#230
#605
11
DFC Plus
(All Weather)
Step 1
Step 2
Step 3
service they receive. This card is sent to us and we insert that feedback
on to your on-line listing. It is this feedback that determines how well
rated your garage is by your customers.
www.bestgarageguide.co.uk
The benefit of this guide is simple..
..more customers visiting your garage!
Remember! The biggest single factor that influences how a customer chooses a service provider is Word of Mouth.