Académique Documents
Professionnel Documents
Culture Documents
2014/15
1.
d. Data Link
e. Network
2.
3.
4.
5.
d. 1,3
e. 1,2
6.
Switch>en
Switch# (1)
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#enable password tkj123
Switch(config)#enable (2) tkj123
Switch(config)#(3)
Switch#
Choose the right answer and collect the configuration
a. configure terminal, secret, out
b. configure terminal, deep, logout
c. configure terminal, under, sign out
d. configure terminal, secret, exit
e. configure terminal, login, reload
7.
8.
9.
In Cisco Router if you want to configure the serial 0/0/0 with ip address 192.168.10.2
255.255.255.0 please collect this question and choose the right answer
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)# (1)
R1(config-if)# (2)
R1(config-if)# (3)
R1(config-if)# no shut
R1(config-if)#exit
a. in fa0/1, ip address 192.168.10.2 255.255.255.0, clock rate 630000
b. in s0/0/0, ip address 192.168.10.2 255.255.255.0, clock rate 640000
c. in s1/0/0, ip address 192.168.10.2 255.255.255.0, clock rate 650000
d. in s0/0/0, ip address 192.168.10.2 255.255.253.0, clock rate 660000
e. in s1/0/1, ip address 192.168.10.2 255.255.255.121, clock rate 670000
10. The network shown in the diagram is experiencing connectivity problems. Which of the
following will correct the problems?
11. The Ethernet networks connected to router R1 in the graphic have been summarized for router
R2 as 192.1.144.0/20. Which of the following packet destination addresses will R2 forward to R1,
according to this summary ?
a.
b.
c.
d.
e.
192.1.159.2
192.1.160.11
192.1.138.41
192.1.1.144
192.1.143.145
a.
b.
c.
d.
e.
13. Both switches are using a default configuration. Which two destination addresses will host 4
useto send data to host 1? PLEASE CHOOOSE DOUBLE ANSWER !
a. the IP address of host 1
b. the IP address of host 4
c. the MAC address of host 4
d. the MAC address of the Fa0/0 interface of the R1 Router
e. the MAC address of the Fa0/1 interface of the R1 Router
a.
b.
c.
d.
e.
LAN PORT
CONSOLE PORT
POWER PORT
VGA PORT
SERIAL PORT
23. What must be installed first if we want to configure the web server?
a. Apache
d. Squid
b. Postfix
e. Vsftpd
c. Bind
24. Proxyserversarepopular at this time is...
a. Samba
b. Apache
c. Squid
d. Squirrel Mail
e. Proxylite
25. Server that the function is to allow users to make the process of downloading the e-mails that
exist on the mail server to the local computer to read is the type of server?
a. SMTP
d. SNORT
b. POP
e. DNS
c. SNOP
26. DomainName System(DNS) isa system that allowsahostnameon a computer networkor the
Internettranslatesinto...
a. broadcast address
d. Home ID
b. Thehost ID
e. Protocol
c. IP Address
27. Services that giving IP Address to computers that requested called?
a. DNS Server
d. DHCP Sever
b. File Server
e. Web Server
c. FTP Server
28. The databaseserver isrecently usedis...
a. Apache
b. MySql
c. Squid
a.
b.
c.
d.
e.
d. MYOB
e. DBFSL
31. What command is used to enable login feature on a port that has been given a password?
a. Login
b. Enable
c. Running
d. Disable
e. Password
32. If you want to save the running configuration we can give command?
a. Copy running-config startup-config
b. Copy startup-config running-config
c. Copy running-config tftp
d. Show startup-config
e. Erase startup-config
33. What Default Duplex mode on the switch?
a. Full duplex
b. Half duplex
c. Auto
d. Full-flow-control
e. Auto duplex
34. if you want to give access to the VLAN that the switch can be connected with other switches is
to use mode ?
a. Switchport mode access
b. Switchport mode trunk
c. Switchport mode auto
d. Switchport access vlan2
e. Switchport mode access trunk
35. What is the meaning of this command switch (config) #line vty 0 3?
a. give telnet password on 4 user
b. to enter the port 0 until port 3
c. give access to telnet on port 0 until port 3
d. to enable passwords on telnet
e. telnet configuration
36. how to delete vlan 2?
a. Switch (config) # erase vlan 2
b. Switch (config) # delete vlan 2
c. Switch (config) # format vlan 2
d. Switch (config) # end vlan 2
e. Switch (config) # no vlan 2
37. if we would use a router to connect vlan, which mode switches to be connected to the router?
a. Switchport mode access
b. Switchport mode trunk
c. Switchport mode auto
d. Switchport access trunk
e. Switchport mode access trunk