Académique Documents
Professionnel Documents
Culture Documents
User Guide
MobiView
Turning Technologies, LLC, 255 West Federal Street, Youngstown, OH 44503 USA.
TurningPoint is a registered trademark of Turning Technologies, LLC. Other trademarked product names mentioned in this manual
are owned by their respective companies.
The following regulatory statements apply to radio frequency and infrared transmitters and receivers mentioned in this manual,
including the ResponseCard RF, ResponseCard RF LCD, ResponseCard IR, ResponseCard XR, ResponseCard NXT, QT Device,
CPS IR, CPS Pulse, CPS Spark, Gen 2, PRS RF, PRS IR, DualBoard, Touch Board, Touch Board Plus, MeetingBoard, SchoolBoard,
iPannel, Mobi, MobiView, MobiKWIK, Mobi Learner, Mobi 360 and their respective receivers.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate
the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
turningtechnologies.com/user-guides
MobiView
TABLE OF CONTENTS
ABOUT MOBIVIEW
Technical Requirements
4
4
MOBIVIEW SETUP
Pairing the MobiView with the MultiHub
Calibrating the MobiView Touchscreen
Changing the Language on the MobiView
Adjusting the Brightness on the MobiView
Updating Firmware
6
6
7
7
7
8
USING MOBIVIEW
Writing a Note
Annotating Content
Managing Favorites
Using the Keyboard
Viewing Reports
Accessing Settings
Multi-User Mode
Configuring Multi-User Mode
Selecting the Presenter
Locking Tablets
9
9
9
10
10
11
12
12
12
12
13
14
14
14
14
15
CONTACT US
16
turningtechnologies.com/user-guides
MobiView
ABOUT MOBIVIEW
MobiView is a mobile interactive whiteboard used to display course material, annotate your desktop and ask interactive
questions.
MobiView comes with a receiver (MultiHub), USB cable, charging stand and digital pen.
NOTE
The digital pen does not contain any ink and cannot be used to write on paper or surfaces other than the
MobiView.
With MobiView, you can:
l
Access Favorites
Interact with any software installed on your computer by using the MobiView as your keyboard and mouse
Technical Requirements
MobiView is designed to function with most computers; however, there are some basic hardware and software requirements.
PC
Mac
l
l
l
l
l
l
2 GB RAM
Java 6 or higher
turningtechnologies.com/user-guides
MobiView
Linux
l
2 GB RAM
"bc" utility
"finger" utility
libstdc++6
turningtechnologies.com/user-guides
MobiView
MOBIVIEW SETUP
The MobiView and digital pen are delivered partially charged to allow you to use these items immediately after unpacking the
box. However, it is recommended to charge these items for approximately eight (8) hours before beginning normal use.
This chapter covers the following topics:
Pairing the MobiView with the MultiHub
Calibrating the MobiView Touchscreen
Changing the Language on the MobiView
Adjusting the Brightness on the MobiView
Updating Firmware
WorkSpace
Flow
turningtechnologies.com/user-guides
MobiView
Tap Minus to subtract time before the screen enters sleep mode.
turningtechnologies.com/user-guides
MobiView
NOTE
If the screen dims while you are teaching, tap the screen with the digital pen or your fingertip.
Updating Firmware
Turning Technologies periodically updates the firmware on the MobiViewand the MultiHub. If WorkSpace or Flow detects a
new version of the firmware for the MobiView or MultiHub, it generates a message at start-up on the MobiView.
1 If updating the MobiView firmware, remove the MultiHub from the computer.
2 Connect the device requiring the firmware update to the computer. If you are updating the MobiView, connect the device
to the computer with a USB cable.
NOTE
Do not attempt to update the MobiView using the charging stand. Use the USB cable provided to
connect the MobiView directly to your computer.
3 Click the Turning Technologies icon from the notification area (PC)/Menu Extras area (Mac)/Dash Home (Linux).
4 Select eInstruction Device Manager from the menu.
Device Manager opens.
5 Select the MobiView icon.
6 Click File and select Preferences.
7 Click the Firmware Update tab and click Check for Updates.
l
If an update is available, follow the on-screen prompts to install the update.
8 Click OK.
turningtechnologies.com/user-guides
MobiView
USING MOBIVIEW
All MobiView features are accessed directly from the Home Screen.
This chapter covers:
Writing a Note
Annotating Content
Managing Favorites
Using the Keyboard
Viewing Reports
Accessing Settings
Multi-User Mode
Writing a Note
The Note function allows you to create and save up to 20 private notes or post public notes to share with your class.
1 Tap Notes.
The Notepad opens.
2 Tap the Pen button and tap a color choice for the pen.
a Optionally, adjust the thickness of the pen line by tapping the white dots.
b Optionally, tap the icon NEXT to the plus sign to change the background color of the note. The color change is
only visible on the projector.
3 Write the note directly on the touchscreen or the MobiViews active writing area.
Notes are automatically saved in the MobiView. Use the arrow buttons to navigate between notes.
4 To post a note, tap the Post button. The note will be posted to the current WorkSpace page.
l
To add a note, tap the Plus button.
l
Annotating Content
Access WorkSpace tools to annotate content and collaborate with multiple users from anywhere in the classroom. The tools
displayed on the Annotate screen can be customized.
TIP
Refer to the WorkSpace for PC User Guide or WorkSpace for Java User Guide for help using
WorkSpace.
How to annotate content...
1 WorkSpace opens in Lesson Mode upon selecting an annotation tool. Tap the Pen icon on the WorkSpace toolbar.
2 Write on the MobiViews active area to annotate the current screen or tap the Blank Page icon on the WorkSpace
toolbar to annotate on a new page.
l
Use the WorkSpace toolbar tools and the WorkSpace Properties Bar to adjust the pen options.
How to customize the WorkSpace tools on the MobiView...
turningtechnologies.com/user-guides
MobiView
10
1 Tap Annotate.
2 Tap Customize Tools.
Device Manager opens on your computer.
3 Select a function row.
4 Select the desired tool from the MobiView WorkSpace Annotation Tools drop-down menu.
5 Click OK.
Managing Favorites
You can bookmark and access up to 16 favorite links to websites or files. Favorites are set up and stored in Device Manager.
IMPORTANT
If MobiView is used with another computer, your Favorites need to be reset.
How to add a website or file to Favorites...
1 Tap Favorites.
2 Tap Add Favorite.
Device Manager opens to the MobiView Favorites tab.
3 Select an available row.
4 Click the link icon (to link a website) or the folder icon (to link a file).
l
If link, enter the name to be displayed on the touchscreen and the URL.
l
If file, enter the name to be displayed on the touchscreen and browse to the file.
5 Click OK.
TIP
To edit a Favorite, select the appropriate row and follow step 4 above.
How to access a Favorite...
1 Tap Favorites.
2 Tap the Favorite you would like to open.
The website or file opens on your computer.
turningtechnologies.com/user-guides
MobiView
11
How to use the keyboard in Lesson Mode (PC, Mac or Linux) or Annotate Over Desktop Mode (PC Only)...
1 Tap Keyboard.
The keyboard opens.
2 Use the pen tip to enter characters on the MobiView keyboard.
The Type Text window and On-screen Keyboard appear on the desktop.
3 Click the pen once to the MobiView touchscreen to add text.
4 Tap Exit to close the keyboard.
Viewing Reports
Reports can be viewed in real time when using clickers.
Available Reports
Question Statistics
Answer Distribution
Session Summary
Response Grid
When results data is available, a report icon appears to the left of the title bar at the top of the touchscreen.
turningtechnologies.com/user-guides
MobiView
12
Accessing Settings
The following can be accessed from the Settings icon:
l
Auto Start - select the software that will open when the MultiHub is plugged in
Calibrate Touch Screen - calibrate the touch screen when using Notes
Device Name - enter a name for the MobiView (up to eight characters)
Multi-User Mode
Multi-User Mode allows two or more participants to interact in WorkSpace using a collaborative (shared) or defined (one person
per defined area) space. Multiple mobile devices can be displayed on the DualBoard, Touch Board or Touch Board Plus at the
same time.
MobiView is automatically designated as the presenter tablet in a multi-device environment, (if there is no other device
already set as presenter) allowing you to start and stop multi-user mode and to view instant reports if using clickers.
turningtechnologies.com/user-guides
MobiView
13
4 From the menu bar, click Options and select Set Presenter.
The selected device is now the presenter device.
Locking Tablets
If using student tablets with WorkSpace, the presenter can lock any devices in use and regain control of the session.
1 Click the Turning Technologies icon from the notification area (PC)/Menu Extras area (Mac)/Dash Home (Linux).
2 Select eInstruction Device Manager from the menu.
Device Manager opens.
3 Select the icon for the device to be locked.
4 Click the Lock icon.
To unlock a device, click the Unlock icon.
TIP
You can also lock all devices by clicking the Toolbox icon on the WorkSpace toolbar and clicking Lock.
turningtechnologies.com/user-guides
MobiView
14
turningtechnologies.com/user-guides
MobiView
15
turningtechnologies.com/user-guides
MobiView
16
CONTACT US
For additional help, contact Turning Technologies Technical Support.
Technical Support is available from 7 a.m. - 9 p.m. EST.
From within the contiguous United States, you can reach Technical Support toll-free by calling 866.746.3015. If you are calling
from outside of the United States, please call +1 330.746.3015.
Technical Support may also be reached via e-mail at support@turningtechnologies.com or support@einstruction.com, a brand
of Turning Technologies.
Office Locations
Ohio
Belfast
19 Colvin House
Inspire Business Park
Carrowreagh Road
Belfast BT16 1QT
United Kingdom
Direct: +44 (0)28 9048 7898
Paris
Amsterdam
turningtechnologies.com/user-guides