Académique Documents
Professionnel Documents
Culture Documents
constructive solutions
Surface Preparation
Advantages
All surfaces must be clean and dry and free from dirt, dust, oil
and grease. All loosely adhering particles such as rust, scale,
cement laitance etc should be removed. All organic growth
should be removed using a fungicidal wash, followed by
thorough washing with clean water.
Application
! Single component
Drying time
6 hours @ 35C
Overcoating time
Nitoproof 230*
Limitations
Application should not commence if the temperature is below
6C or above 45C.
Technical support
Fosroc offers a comprehensive technical support service to
specifiers, end users and contractors. It is also able to offer
on-site technical assistance, an AutoCAD facility and
dedicated specification assistance in locations all over the
Nitoproof 230*
Estimating
Additional Information
Supply
Nitoproof 230
Coverage
Nitoproof 230
Storage
Fire
! fluid micro-concretes
Flash points
33C
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard
Conditions for the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the users
responsibility to obtain the recent version. Refer to www.fosroc.com.
Al Gurg Fosroc
LLC
Post Box 657, Dubai
United Arab Emirates
www.fosroc.com
Head Office
telephone: (+9714) 2039699
email: agf@fosroc.com
Regional offices
Abu Dhabi, Al Gurg Fosroc
Bahrain, YBA Kanoo
email: abudhabi@fosroc.com
email: bahrain@fosroc.com
Kuwait, Boodai
Oman, Al Amana
Qatar, Tadmur
telephone: 4817618
telephone: 24815080
telephone: 4500607
fax: 4832124
fax: 24817554
fax: 4500543
email: kuwait@fosroc.com
email: oman@fosroc.com
email: qatar@fosroc.com
UAE/0187/01/D