Académique Documents
Professionnel Documents
Culture Documents
home
sitemap
about
jobs
abbreviations
of
fun
question
conversion
links
copyright
misc
search
contact
PIPING
DOCS MATL SOCIETIES PIPES FLANGES FITTINGS VALVES BOLTS GASKETS EQPT SPECIALS STEEL DIN STEAM OTHERS
NPS
of
Nozzle
Center of
Nozzle
to
O.D. of Run
to
End of
O.D. to O.D.
of Nozzle
End of Run
Nozzle
http://www.wermac.org/documents/spacing-welded-nozzles.html
1/7
6/12/2014
2.1/2
114
76
76
127
89
89
152
102
102
178
114
114
203
127
127
254
152
152
10
305
178
178
12
356
203
203
14
381
216
216
16
432
229
229
18
483
254
254
20
533
279
279
24
610
305
305
http://www.wermac.org/documents/spacing-welded-nozzles.html
2/7
6/12/2014
Table 1 - 3
Center of
Nozzle
to
End of Run
O.D. of Run
to
End of
Nozzle
2.1/2
152
114
152
178
127
178
203
140
203
NPS
of
Nozzle
http://www.wermac.org/documents/spacing-welded-nozzles.html
O.D. to
O.D.
of Nozzle
3/7
6/12/2014
241
152
241
279
165
279
356
203
356
10
432
241
432
12
508
279
508
14
559
305
559
16
635
330
635
18
711
356
711
20
787
381
787
24
914
406
914
Table 2 - 3
http://www.wermac.org/documents/spacing-welded-nozzles.html
4/7
6/12/2014
Center of
O.D. of Run
Nozzle
to
to
End of
Nozzle
End of Run
Nozzle
2.1/2
140
76
152
76
178
89
203
102
254
127
305
152
NPS
of
http://www.wermac.org/documents/spacing-welded-nozzles.html
O.D. to
O.D.
of Nozzle
5/7
6/12/2014
MFR
Standard
10
356
12
406
216
14
432
229
16
483
254
18
533
279
20
584
305
24
660
356
178
Table 3 - 3
Notes:
1.
MFR = Manufacturer
2. All nozzle welds should be checked for compliance with the applicable code requirements.
3. It is preferred that multiple branch openings of in-line nozzles be spaced so that their reinforcement zones do
not overlap. If closer specing is necessary, the reinforcement requirements of the applicable construction
code shall be met.
4. Some configurations of integrally reinforced nozzles in combination with certain header sizes may present a
problem in the radiographic examination of the attachment weld due to inability to meet the geometric
unsharpness requirements of the construction code.
5. Where attachments such as flanges, fittings valve and pipe insulation are involved, minimum dimensions
tabulated may have to be increased to allow for required clearances.
6. In special cases, it may be possible to reduce the dimensions given in the tables. Such design should then be
submitted to the fabricator for individual considerations, as close spacing may involve additional shop
operation to prevent, or correct distortion.
http://www.wermac.org/documents/spacing-welded-nozzles.html
6/7
6/12/2014
Certain materials and combinations of nozzle and header pipe size and wall thickness
together with multiple branch openings welded to a header may result in distortion of the
header pipe.
top of page
Related Results
1. Nozzles
2. Nozzle
3. Spray Nozzles
4. Misting Nozzles
5. Rainbird Nozzles
6. Hose Nozzles
Chitika | Opt out?
http://www.wermac.org/documents/spacing-welded-nozzles.html
7/7