Académique Documents
Professionnel Documents
Culture Documents
none
Vista:
none
XP:
none
=================================================
2011-09-08 v187_Intel_EL_6224.6XP_6224.7V_SDC
=================================================
Release Notes:
Configuration Changes (All platforms):
none
Known Issues and Limitations
Win 7:
IDT control panel section will freeze and become non-responsive
Vista:
IDT control panel section will freeze and become non-responsive
XP:
none
=================================================
2010-07-13 v185_Intel_EL_6224.6XP_6224.7V_SDC
=================================================
IDT Binary Changes:
6224.7 Latest validated release
Release Notes:
Vista:
none
=================================================
2010-03-17 v184_Intel_EL_6224.6XPV_SDC_WHQL
=================================================
IDT Binary Changes:
6224.6 Latest validated release
Release Notes:
Configuration Changes (All platforms):
Update binary for WLK 1.5 test
Known Issues and Limitations
Win 7:
none
Vista:
none
XP:
none
=================================================
2009-11-06 v183_Intel_EL_6224.4XPV_SDC
=================================================
IDT Binary Changes:
6224.4 Latest validated release
Release Notes:
Configuration Changes (All platforms):
Add configuration to support platform of Niveus Media
Known Issues and Limitations
Win 7:
none
Vista:
none
XP:
none
none
=================================================
2009-09-10 v180_Intel_EL_6224.2XPV_AUS
=================================================
IDT Binary Changes:
6224.2 Latest validated release
Release Notes:
Configuration Changes (All platforms):
Bug fixed: #202PCA-2374IDTGUI2.0:Win7: Master Volume cannot be
unmuted.
Known Issues and Limitations
Win 7:
#197PCA-2157: PLIIx for quad config cannot be disabled.
Vista:
#197PCA-2157: PLIIx for quad config cannot be disabled.
XP:
none
=================================================
2009-08-26 v179_Intel_EL_6224XPV_AUS
=================================================
IDT Binary Changes:
6224 Latest validated release
Release Notes:
Configuration Changes (All platforms):
PCAT-1701 - Connecting jack to FP HP sets Headphones (RTC) to default
playback
PCA-2375 - Enabling DDL on Front SPDIF renders front SPDIF mute button
useless. (EL)
Known Issues and Limitations
Win 7:
Vista:
PCA-2374 :Master Volume cannot be unmuted. (EL)
XP:
none
=================================================
2009-08-14 v178_Intel_EL_6224XPV_AUS_WHQL
=================================================
IDT Binary Changes:
6224 Latest validated release
Release Notes:
Configuration Changes (All platforms):
CP-512 Intel EagleLake XP/Vista/Win7 WHQL
Known Issues and Limitations
Win 7:
Vista:
none
XP:
none
=================================================
2009-07-26 v178_Intel_EL_6224XPV_AUS
=================================================
IDT Binary Changes:
6224 Latest validated release
Release Notes:
Configuration Changes (All platforms):
- Bug fixed: Enabling Dolby on the SPDIF endpoint causes the master
-
- Dolby menu options only appear after the endpoint has been
Vista:
XP:
=================================================
2009-06-19 v169_Intel_EL_6212XPV7_AUS-WHQL
=================================================
IDT Binary Changes:
6212 Latest validated release
Release Notes:
Configuration Changes (All platforms):
PCAT-1484 Intel WHQL issue
PCAT-1485 I92XXD6R.INI is blank
Known Issues and Limitations
Win 7:
PCAT-845 Enabling Dolby on the SPDIF endpoint causes the master mute
function to stop working.
Vista:
PCAT-845 Enabling Dolby on the SPDIF endpoint causes the master mute
function to stop working.
XP:
none
=================================================
2009-06-10 v164_Intel_EL_6210XPV7_AUS
=================================================
IDT Binary Changes:
6210 Latest validated release
Release Notes:
Configuration Changes (All platforms):
none
Known Issues and Limitations
Win 7:
none
Vista:
none
XP:
none
=================================================
2009-05-09 v158_Intel_EL_20005.0XPV_AUS
=================================================
IDT Binary Changes:
20005.0 Dolby certified implementation;
20005.0 Binaries are OEMReady-compliant for Win7;
Release Notes:
Special Note (All platforms, All OSs):
Code refactoring directed at our Command and Control Performance has
increased the throughput of our Get and Set Interfaces. Less CPU usage
and faster response time would be the benefits of this implementation.
Configuration Changes (All platforms):
none
Known Issues and Limitations
Win 7:
none
Vista:
none
XP:
=================================================
2009-05-01 v157_Intel_EL_20002.0XPV_AUS
=================================================
none
Vista:
none
XP:
=================================================
2009-04-06 v155_Intel_EL_20002.0XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
20002.0 Dolby certified implementation;
20002.0 Binaries are OEMReady-compliant for Win7;
Configuration Changes (All platforms):
Win 7:
none
XP:
none
Vista:
none
XP:
=================================================
2009-02-10 v150_Intel_EL_6152.0XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6152.0 Dolby certified implementation;
Configuration Changes (All platforms):
Vista:
Bug fixed: Volume slider in jack setup and levels sections are now
synchronized.
o IDT PCA-1306
XP:
none
XP:
none
=================================================
2009-01-29 v148_Intel_EL_6146.0XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6146.0 Dolby certified implementation;
Configuration Changes (All platforms):
Vista:
Bug no longer reproducible: Vista 32-bit, SP1 - Intel Eagle Lake Hear beeps on stream start and stop on RTC HP endpoint
o IDT PCA-1109
XP:
Bug solved: XP 32-bit SP3, Intel EL; Bug6: Aux left and right
channels lost entirely from audio
o IDT PCA-1247
Bug solved: Lose center channel in Quad Dolby mode
o IDT PCA-1251
Bug solved: Intel EL, Legacy, XP32 &64; Rear right channel's
output is missing when speaker configuration is set to Quad.
o IDT PCA-1341
Bug solved: Intel Legacy & EL, XP32 SP3 - Bass Management has no
effect on audio output.
o IDT PCA-892
Vista:
XP:
=================================================
2008-12-10 v142_Intel_EL_6132.0XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6132.0 Dolby certified implementation;
Configuration Changes (All platforms):
Vista:
IDT GUI speaker graphics are now set to reflect all speakers
available in a specific speaker configuration (stereo, 5.1, etc),
and will show speakers that are plugged in with a light gray
color.
o IDT PCA-515
Rear microphone works correctly with input monitor.
o IDT PCA-1104
XP:
Removed bug that causes input monitor to disable all audio output.
o IDT PCA-1118
XP:
-
none
XP:
The IDT speaker setup GUI displays all speakers (up to 7.1) that
are plugged in despite the user's selection of another speaker
configuration such as stereo.
o IDT PCA-1189
The Dolby Master Studio Logo is being replaced by the Dolby Home
Theater logo (same as in Vista) for the next release.
o IDT PCA-1224
In specific scenarios, back left and right channels play through
both of the back left and back right speakers.
o PCA-1246
=================================================
2008-11-26 v141_Intel_EL_6127.0XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6127.0 Dolby certified implementation;
Configuration Changes (All platforms):
Vista:
XP:
Removed bug that causes input monitor to disable all audio output
o IDT PCA-1118
XP:
-
none
XP:
The IDT speaker setup GUI displays all speakers (up to 7.1) that
are plugged in despite the user's selection of another speaker
configuration such as stereo. This bug has been active for a few
deliveries, but has just been officially reported.
o IDT PCA-1189
=================================================
2008-11-14 v138_Intel_EL_6119.0XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6119.0 Dolby certified implementation; Microsoft WHQL certified
Configuration Changes (All platforms):
Vista:
XP:
none
XP:
When Dolby is disabled, 5.1 and 7.1 channel data rear and side
data is down-mixed into front right and left channels
o IDT PCA-1033
=================================================
2008-11-05 v136_Intel_EL_6104.5XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6104.5 Dolby certified implementation; Microsoft WHQL certified
Configuration Changes (All platforms):
Vista:
XP:
Enabling Dolby headphone now turns on the GUI LED during active
mode
o Intel-reported bug #144
Dolby enabled for all Eagle Lake models
o Intel-reported bug #155
Dolby Digital Live can now be enabled/disabled successfully for
SPDIF
o Intel-reported bug #151, 156
Dolby Virtual Speakers and Virtual Headphone mode works
o Intel-reported bugs #145, 146
When Dolby HT is enabled, speaker setup is changed to 7.1
none
XP:
-
none
=================================================
2008-09-25 v130_Intel_EL_6087XPV_RC_AUS_W.zip
=================================================
IDT Binary Changes:
6087.0 Dolby certified implementation; Microsoft WHQL certified
Configuration Changes (All platforms):
Vista:
- Fixed: Input Monitor slider is exposed in the Stereo Mix endpoint
in the IDT GUI, PCAUD54940
- Fixed: Devices disabled from MS GUI can be re-enabled from IDTGUI;
but the string currently displays **IDS_DEFAULT_ENABLE it
should be Enable this device and will be fixed in the next
release.
- Fixed: Applying high gains for a high level input signal (from
line-in or other capture devices) for stereo mix or input monitor
can potentially cause distortion in recording or playback. Both
stereo mix recording and input monitoring feature involves three
different stages of volume controls. In a more extreme (and rare)
case where three (or even two) volume controls are set high while
input source already has a higher volume, users can potentially
over-amplify the input signal and cause distortion in its
recording or playback activities. Such behavior is actually
working as designed. IDT may provide alternate solution to prevent
such behavior being exposed to end users. However, it is believed
by IDT that the current implementation gives the user the most
flexibility in creating their audio and thus recommend against any
change. PCAUD55018
- Fixed: Inconsistency in Digital Input Monitor behaviors (i.e.
Line-In monitoring function is reportedly switched off after
disable and re-enable DIM.) This was reportedly observed a few
times on Skyberg platform and its under investigation (IDT
internal defect PCAUD52252)
XP:
-
XP:
-
none
=================================================
2008-09-04 v128_Intel_EL_6064.9XPV_RC_AUS_W.zip
=================================================
IDT Binary Changes:
none
Vista:
- none
XP:
- none
Known Issues and Limitations
Vista:
XP:
-
none
=================================================
2008-08-22 v125_Intel_EL_6064XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6064 Dolby certified implementation
Configuration Changes (All platforms):
Vista:
- Fixed: Input Monitor slider is exposed in the Stereo Mix endpoint
in the IDT GUI, PCAUD54940
- Fixed: Devices disabled from MS GUI can be re-enabled from IDTGUI;
but the string currently displays **IDS_DEFAULT_ENABLE it
should be Enable this device and will be fixed in the next
release.
- Fixed: Applying high gains for a high level input signal (from
line-in or other capture devices) for stereo mix or input monitor
can potentially cause distortion in recording or playback. Both
stereo mix recording and input monitoring feature involves three
different stages of volume controls. In a more extreme (and rare)
case where three (or even two) volume controls are set high while
input source already has a higher volume, users can potentially
over-amplify the input signal and cause distortion in its
recording or playback activities. Such behavior is actually
working as designed. IDT may provide alternate solution to prevent
such behavior being exposed to end users. However, it is believed
by IDT that the current implementation gives the user the most
flexibility in creating their audio and thus recommend against any
change. PCAUD55018
- Fixed: Inconsistency in Digital Input Monitor behaviors (i.e.
Line-In monitoring function is reportedly switched off after
XP:
-
none
none
=================================================
2008-08-07 v124_Intel_EL_6033.2XPV_RC_AUS_W.zip
=================================================
IDT Binary Changes:
6033.2 Dolby certified implementation; Microsoft WHQL certified
Configuration Changes (Flycreek i73E-EL3.ini):
Vista:
- none
XP:
-
=================================================
2008-07-20 v122_Intel_EL_6033.2XPV_RC_AUS_W.zip
=================================================
IDT Binary Changes:
6033.2 Dolby certified implementation; Microsoft WHQL certified
Configuration Changes (Flycreek i73E-EL3.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
- Fixed Mic boost will be limited to 10dB in the next driver release
XP:
- Fixed 5.1 and 7.1 speaker configuration options added.
- Fixed 7.1 Surround will break when starting an RTC stream, this
issue has already been recognized and fixed and will be in the
next driver release.
Configuration Changes (Icedale i73E-EL2.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
XP:
- Fixed 5.1 and 7.1 speaker configuration options added.
- Fixed 7.1 Surround will break when starting an RTC stream, this
issue has already been recognized and fixed and will be in the
next driver release.
Configuration Changes (Skyberg i73E-EL1.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
XP:
-
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
- Fixed Mic boost will be limited to 10dB in the next driver release
XP:
- Fixed 5.1 and 7.1 speaker configuration options added.
- 7.1 Surround will break when starting an RTC stream, this issue
has already been recognized and fixed and will be in the next
driver release.
Configuration Changes (Icedale i73E-EL2.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
XP:
- Fixed 5.1 and 7.1 speaker configuration options added.
- 7.1 Surround will break when starting an RTC stream, this issue
has already been recognized and fixed and will be in the next
driver release.
Configuration Changes (Skyberg i73E-EL1.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
XP:
- Fixed 5.1 and 7.1 speaker configuration options added.
- 7.1 Surround will break when starting an RTC stream, this issue
has already been recognized and fixed and will be in the next
driver release.
None
=================================================
2008-07-11 v116_Intel_EL_6033.2XPV_RC_AUS_WHQL.zip
=================================================
IDT Binary Changes:
6033.2 Components are Microsoft certified (v115 WHQLed); Dolby
certified implementation
Configuration Changes (Flycreek i73E-EL3.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
XP:
-
case where three (or even two) volume controls are set high while
input source already has a higher volume, users can potentially
over-amplify the input signal and cause distortion in its
recording or playback activities. Such behavior is actually
working as designed. IDT may provide alternate solution to prevent
such behavior being exposed to end users. However, it is believed
by IDT that the current implementation gives the user the most
flexibility in creating their audio and thus recommend against any
change.
Mic boost will be limited to 10dB in the next driver release
XP:
-
7.1 Surround will break when starting an RTC stream, this issue
has already been recognized and fixed and will be in the next
driver release.
=================================================
2008-07-08 v115_Intel_EL_6033.2XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
6033.2 Dolby certified implementation
Configuration Changes (Flycreek i73E-EL3.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
XP:
- 5.1 and 7.1 speaker configuration options added.
Configuration Changes (Icedale i73E-EL2.ini):
Vista:
- Fixed End user EQ presets currently are configured on speaker/hp
endpoint only for which user EQ is intended for. This introduces a
visual defect where no user EQ presets available in dropdown menu
for RTC headphone, SPDIF-Out front and SPDIF-Out rear endpoints on
IDTGUI2.0 mini panel. (Intel defect #110)
- Fixed No visual indication given when speaker test is run on
IDTGUI2.0 (Intel defect #111)
- Fixed Re-tasking jack pop-up disappears in seconds if the GUI is
already opened during the plug event (Intel defect #119)
XP:
- 5.1 and 7.1 speaker configuration options added.
None
=================================================
2008-06-30 v113_Intel_EL_6017.1XPV_RC_AUS_WHQL.zip
=================================================
IDT Binary Changes:
6017.1 components are Microsoft certified (WHQLd).
XP:
-
=================================================
2008-05-27 v104_Intel_EL_6017.1XPV_RC_AUS.zip
=================================================
IDT Binary Changes:
All components (driver, GUI, service, installer and APOs) moved to
5927.3, which is a branch-out of 6017.1
Driver
-
=================================================
2008-05-14 v100_Intel_EL_5927.3XPV_AUS.zip
=================================================
IDT Binary Changes:
All components (driver, GUI, service, installer and APOs) moved to
5927.3, which is a branch-out of 5927.1
IDTGUI2.0
Addition of AC97 Front Panel Mute Rear Speaker function
Set Device Default function improvement turning on this
function over IDTGUI automatically enables the current
disabled endpoint. This improvement is made to optimize the
set device default function of IDT GUI2.0
Configuration Changes (Icedale Flycreek):
Vista:
XP:
-
None
None
=================================================
2008-04-24 v098_Intel_EL_5927.1XP_5929V_AUS-W.zip
=================================================
IDT Binary Changes:
===============================================
2008-04-08 v091_Intel_EL_5914XPV_AUS.zip
===============================================
Eagle Lake Icedale Flycreek
Configuration Changes:
Vista:
- Added secondary devices support(speakers for front panel green
jack & headphone for rear panel green jack)
- Removed stereo mix endpoint from recording panel (stereo mix is
not functional with 5914 driver binary, but will be added back in
next release)
- Added driver configuration support to synchronize between speaker
configuration and jack configuration on IDTGUI
XP
-
===============================================
2008-04-02 v090_Intel_EL_5914XPV_AUS.zip
===============================================
Eagle Lake Icedale Flycreek
Configuration Changes:
Vista:
- Added Dolby Spruce configurations
- Added Mono Mic APO for microphone endpoint (per Foxconn request)
- Re-named (shorten) all playback endpoints to avoid long string
names on IDTGUI
- Re-configured mixer usage model for WLP compliance (see known
issue section below)
- Bypassed IDT spreader APO (see known issue section below)
XP
-
Exposed Mono Mic checkbox on both IDT and MS mixer panel (per
Foxconn request)
Added speaker device for front panel green jack and headphone
device for rear panel green jack
===============================================
2008-03-06 v075_D5762xp_D5862wrt_Gui2.0_B3.5
===============================================
Eagle Lake Icedale Flycreek
Configuration Changes:
Vista:
- Change Power Management default = off
- Added time delay for Power Management for preventing Brazos pop
- Reconfigure SPDIF. The previous HDMI device is now the front
panel SPDIF
- Modified schema configuration (the GUI look) for additional SPDIF
device
- Added spreader APO (for fixing one of the issue Foxconn reported
earlier)
XP
-
Added time delay for Power Management for preventing Brazos pop
Fixed front panel SPDIF issue; front panel SPDIF is now under IDT
Audio 2 (for RTC capability)
Modified schema configuration; added front panel SPDIF device on
GUI
Added spreader APO plug-in
Added time delay for Power Management for preventing Brazos pop
Fixed front panel SPDIF issue; front panel SPDIF is now under IDT
Audio 2 (for RTC capability)
Modified schema configuration; added front panel SPDIF device on
GUI
Added spreader APO plug-in
==================================================
2008-02-26 v071_D5762xp_D5862wrt_Gui2.0 B3
=================================================
52703 - [Intel] - Eagle Lake - XPV Driver 2.0 BETA3
Vista GUI
========================================================================
2008-02-15 RELEASE: v066_D5762xp_D5862wrt_Gui2.0 Beta.zip
========================================================================
Driver Package
----------------------------------------XPV (WinXP / Vista)
Driver
----------------------------------------XP: V5762
- Known Issues:
* Error message pop up at the end of uninstallation for 64 bit OS
Vista GUI 2.0: V5862
* Configuration support updated for Eagle Lake boards
* Pop suppression implemented for Brazos codec for power saving
modes.
- Known Issues:
* In the RTC menu in IDTGUI, Setup option, there is a dropdown box
with Stereo, Quad, 5.1, 7.1 selection.
* SPDIF jack in IDTGUI and be selected as Side Speaker. This does
not affect SPDIF functionality, only a visual bug.
* Stereo Mix will not work for front panel mic as it is on another
device association. Current Stereo Mix limitation.
* No Dolby support for Eagle Lake boards in this release
* PCAUD00052390 - INTEL_XPV: IDT GUI 2.0 Vista; set sliders on
the "Sliders" button do not aligned correctly...
* Stereo Mix does not function
* Digital Input Monitor not functional for front Mic - Rear Mic
works
* Digital Input Monitor is not exposed for line in - Can be
enabled in MS GUI in Input Monitor Tab in speaker endpoint
* SPDIF string is not translated
* PCAUD00052341 - IDT_XPV: Intel Vista32, GUI 2.0 - There are 2
HDMI endpoints/slider selections in the GUI (see screenshots).
* PCAUD00052392 - INTLDT_XPV_IDT: Bass Management does not
function.
########################################################################
#########
IDT Driver, APO, GUI & Windows Behaviors
#########
########################################################################
A. IDT Spreader
The spreader is a plugin that maximizes the user listening experience
based on the arrangement of speakers connected, the multichannel audio
content of the media being played, and the OS speaker settings.
Spreader action is based on:
Jack presence (speakers connected)
Media playing (channel activity)
OS Speaker setting (Kmixer)
For example:
When an mp3 file is playing over 7.1 speakers
Without the spreader, the mp3 would only render from the front left and
front right speakers.
With the spreader, the mp3 is rendered from all 7.1 speakers.
Note: Spreader is not expected to carry out channel downmix or channel
upmix when an invalid speaker setup is attempted (i.e. setting up for
only rear and C/LFE speakers without the front).
B. IDT Speaker Manager
The speaker manager's primary job is to generate test tones. When a user
clicks a speaker in StacGui, the speaker manager should output an unmodified sound to the speakers.
C. Gui1.8 Hardware Speaker Configuration (XP)
System Speaker Configuration is updated when jack connection status
changes.
1. When connecting front speaker jack only, system speaker configuration
is updated automatically to "Desktop Stereo" for XP and "Stereo" for
Vista
2. When connecting front speaker jack and C/LFE jack, system speaker
configuration is updated automatically to 5.1 Surround
3. When connecting front speaker jack and rear speaker jack, system
speaker configuration is updated automatically to Quad
4. When connecting all 5.1 or 7.1 speaker jacks, system speaker
configuration is updated automatically to 5.1 or 7.1
5. In all other combination, speaker configuration is seen as invalid
and system speaker configuration would not be updated
D. GUI2.0 Software Speaker Configuration (Vista)
Windows
Media Player
Digital
Digital
Analog
Digital
Digital
Analog
Analog
Analog
Control of CD Playback
Volume
Wave in Playback
(path 1)
Wave in Playback
(path 1)
CD-Player or CD Volume
in Playback
(path 2)
1. CD Volume or CD-In
in recording mixer
panel
2. Input-Monitor
in playback mixer
panel
(path 3)
Path 1: Windows Media Player read tracks directly from the CD,
completely bypassing Windows facility. The configuration (analog or
digital) of Windows CD is dont care.
Path 2: Microsoft kernel driver, REDBOOK.SYS, reads sound tracks from
CD and forwards data to a playback stream. Playback stream is supplied
to codec DAC and playback by audio driver.
Path 3: True analog path. CD audio is transmitted over analog cable
between CD drives analog output and codec CD-In input. This doesnt
involve software at all, with exception of controlling CD input
volume/mute on the mixer. Since HD Audio codec does not have a input
mixer, CD audio is playback at codec output through the utilization of
input monitor or digital input monitor. Thus, the control of CD volume
is available at CD volume in recording or (digital) input monitor in
playback panel. Note: Analog CD is NOT hardware-designed on Intel
Eagle Lake platforms, and thus this true analog path does not exist.
However, CD-Player or CD Volume would still appear on Windows and
IDT playback mixer panel because of the existence of path 2 (see above)
where Windows digital CD is still supported.
I.
Rear Mic and Line-In can not work simultaneously because they
share same ADC (1), while the front mic uses a dedicated ADC
(2).
The master volume slider may seem to not affect both SPDIF
devices in EL2 model, however, there are actually two master
sliders to control the main stream and another to control the
RTC endpoint (on which SPDIF2 resides). The second master
volume slider can be accessed by selecting IDTAudio2 from the
Device pulldown on the volume tab of the IDTGUI.