Académique Documents
Professionnel Documents
Culture Documents
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
Find
how
to Access
access preview-only content
Lookout
Inside
Get
Leveraging Technology for a Sustainable World
2012, pp 363-368
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future
Directions
Abstract
The energy efficiency of pneumatic and compressed air systems is an important element in the overall development of sustainable production. This paper
starts with a review of energy consumption in compressed air systems and approaches for assessing system efficiency. The state of art in pneumatic device
and compressed air system level energy optimisation research work is then assessed. A specific focus is placed on the consumer devices widely used in
production equipment including pneumatic drives, blowers and condition monitoring approaches for electro-pneumatic systems. Based on the review,
conclusions are drawn on future directions and opportunities for achieving a step change improvement in energy efficiency of pneumatic based production.
Page %P
Page 1
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
1/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
2/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
3/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
Chapter Metrics
Citations
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
4/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
Related Content
References (53)
1. Radgen, P., Blaustein, E.: Compressed Air Systems in the European Union: Energy, Emissions, Savings Potential and Policy Actions.
Fraunhofer ISI, Stuttgart (2001)
2. Yuan, C.Y., Zhang, T., Rangarajan, A., Dornfeld, D., Ziemba, B., Whitbeck, R.: A decision-based analysis of compressed air usage
patterns in automotive manufacturing. Journal of Manufacturing Systems 25(4), 293300 (2006) CrossRef
3. Risi, J.D.: Energy savings with compressed air. Energy Engineering 92(6), 4958 (1995)
4. Herrmann, C., Thiede, S.: Process chain simulation to foster energy efficiency in manufacturing. CIRP Journal of Manufacturing Science and
Technology 1(4), 221229 (2009) CrossRef
5. Gutowski, T., Dahmus, J., Thiriez, A.: Electrical energy requirements for manufacturing processes. Paper presented 13th CIRP International
Conference on Life Cycle Engineering Leuven, May 31 - June 2 (2006)
6. Devoldere, T., Dewulf, W., Deprez, W., Willems, B., Duflou, J.R.: Improvement potential for energy consumption in discrete part
production machines. In: 14th CIRP Conference on Life Cycle Engineering, Tokyo, Japan, June 11-13 (2007)
7. Duflou, J.R., Kellens, K., Dewulf, W.: Unit process impact assessment for discrete part manufacturing: A state of the art. CIRP Journal of
Manufacturing Science and Technology (0) (2011)
8. Hesselbach, J., Herrmann, C., Detzer, R., Martin, L., Thiede, S., Ludemann, B.: Energy efficiency through optimised coordination of
production and technical building services. In: 15th CIRP Conference on Life Cycle Engineering, Sydney, Australia (2008)
9. Herrmann, C., Suh, S.-H., Bogdanski, G., Zein, A., Cha, J.-M., Um, J., Jeong, S., Guzman, A.: Context-aware analysis approach to
enhance industrial smart metering. In: 18th CIRP International Conference on Life Cycle Engineering, Braunschweig, Germany (2011)
10. Harris, P.: Characterisation and modelling of electro-pneumatic production systems. University of Dublin, Dublin (2011)
11. Diarra, D., Jeswiet, J., Astle, B., Gawel, D.: Energy consumption and CO 2 emissions for manufacturing. Compressed air Systems
Transactions of NAMRI/SME 38, 767773 (2010)
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
5/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
12. Gauchel, W.: Energy-saving pneumatic systems. O+P Olhydraulik und Pneumatik 50(1) (2006)
13. Kaya, D., Phelan, P., Chau, D., Sarac, H.I.: Energy conservation in compressed-air systems. International Journal of Energy
Research 26(9), 837849 (2002) CrossRef
14. Saidur, R., Rahim, N.A., Hasanuzzaman, M.: A review on compressed-air energy use and energy savings. Renewable and Sustainable
Energy Reviews 14(4), 11351153 (2010) CrossRef
15. Parkkinen, J., Zenger, K.: A New Efficiency Index for Analysing and Minimising Energy Consumption in Pneumatic Systems. International
Journal of Fluid Power 9(1), 4552 (2008)
16. Improving Compressed Air System Performance: A Sourcebook for Industry: Compressed Air Challenge, Office of Energy Efficiency and
Renewable Energy, U.S. (1998)
17. Energy efficient compressed air systems. Carbon Trust, London, UK
18. Barber, A.: Pneumatic Handbook, 8th edn., Oxford (1997)
19. Parkkinen, R., Lappalainen, P.: A consumption model of pneumatic systems. In: Conference Record of the IEEE Industry Applications
Society Annual Meeting, pp. 16731677 (1991)
20. Cai, M., Kawashima, K., Kagawa, T.: Power Assessment of Flowing Compressed Air. Journal of Fluids Engineering 128 (March 2006)
21. Eret, P., Harris, C., De Lasa, T., Meskell, C., ODonnell, G.E.: Industrial Compressed Air Usage - Two Case Studies. In: 7th International
Fluid Power Conference, Aachen, Germany, March 22-24, pp. 355366 (2010)
22. Cai, M., Kagawa, T., Kawashima, K.: Energy conversion mechanics and power evaluation of compressible fluid in pneumatic actuator
systems. In: 37th Intersociety Energy Conversion Engineering Conference (IECEC), pp. 438443 (2002)
23. Zhang, Y., Cai, M., Kagawa, T.: Study of cost and energy consumption for pneumatic actuator and electric actuator. In: 7th International
Fluid Power Conference, Aachen, pp. 195210 (2010)
24. Winter, C.A., Bredau, J.: From component supplier to solution provider. In: 7th International Fluid Power Conference, Aachen, pp. 203
220 (2010)
25. Shi, Y., Cai, M.-L.: Study on efficiency and flow characteristics of two kinds of pneumatic booster valves. In: International Conference on
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
6/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
Computer, Mechatronics, Control and Electronic Engineering (CMCE), August 24-26, pp. 4550 (2010)
26. Zhang, Y., Cai, M., Kong, D.: Overall Energy Efficiency of Lubricant-Injected Rotary Screw Compressors and Aftercoolers. In: AsiaPacific Power and Energy Engineering Conference 2009, pp. 15 (2009)
27. Koyamada, K., Tamura, S., Ono, O., Cai, M., Kagawa, T.: Simulation for Energy Savings in Pneumatic System. In: Systems Modeling and
Simulation, pp. 258261. Springer, Japan (2007) CrossRef
28. Doll, M., Sawodny, O.: Energy Optimal Open Loop Control of Standard Pneumatic Cylinders. In: 7th International Fluid Power
Conference, Aachen, pp. 259270 (2010)
29. Herrmann, C., Kara, S., Thiede, S.: Dynamic life cycle costing based on lifetime prediction. International Journal of Sustainable
Engineering 4(3), 224235 (2011) CrossRef
30. Yang, A., Pu, J., Wong, C.B., Moore, P.: By-pass valve control to improve energy efficiency of pneumatic drive system. Control
Engineering Practice 17(6), 623628 (2009) CrossRef
31. Fleischer, H.: Stop oversizing pneumatic components. Machine Design 71(11), 101 (1999)
32. Heilala, J., Helin, K., Montonen, J.: Total cost of ownership analysis for modular final assembly systems. International Journal of Production
Research 44(18), 39673988 (2006) CrossRef
33. Fleischer, H.: Manual of Pneumatic Systems Optimisation. McGraw-Hill, New York (1995)
34. Beater, P.: Pneumatic Drives: System Design, Modelling and Control. Springer, Berlin (2007)
35. Senoo, M., Zhang, H., Oneyama, N.: Research and development on energy saving in pneumatic system. Paper presented at 50th National
Conference on Fluid Power (2005)
36. Otis, D.R., Al-Shaalan, T., Weiss, E.: Reducing compressed air consumption by utilising expansion energy during the actuation of a
pneumatic cylinder. In: 45th National Conference on Fluid Power (1992)
37. Li, T.C., Wu, H.W., Kuo, M.J.: A study of gas economizing pneumatic cylinder. Journal of Physics: Conference series 48, 12271232
(2006) CrossRef
38. Mutoh, H., Kawakami, Y., Hriata, Y., Kawai, S.: An approach to energy conservation in pneumatic systems with meter out circuit. In: 7th
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
7/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
8/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
52. Krichel, S.V., Sawodny, O.: Dynamic modeling of compressors illustrated by an oil-flooded twin helical screw compressor.
Mechatronics 21(1), 7784 (2011) CrossRef
53. Wang, J., Yang, L., Luo, X., Mangan, S., Derby, J.W.: Mathematical Modeling Study of Scroll Air Motors and Energy Efficiency AnalysisPart I. IEEE/ASME Transactions on Mechatronics 16(1), 112121 (2011) CrossRef
9/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
10/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
(ID1)
(ID2)
Editor Affiliations
ID1. Laboratory for Manufacturing, and Sustainability (LMAS), University of California at Berkeley
ID2. Laboratory for Manufacturing, and Sustainability (LMAS), University of California at Berkeley
Authors
Paul Harris (1)
Garret E. ODonnell (1)
Tom Whelan (2)
Author Affiliations
1. Department of Mechanical and Manufacturing Engineering, Trinity College, Dublin, Ireland
2. Hewlett Packard Manufacturing, Liffey Park Technology Campus, Kildare, Ireland
Continue reading...
To view the rest of this content please follow the download PDF link above.
Over 8.5 million scientific documents at your fingertips
Springer International Publishing AG, Part of Springer Science+Business M edia
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
11/12
1/19/2015
Energy Efficiency in Pneumatic Production Systems: State of the Art and Future Directions - Springer
http://link.springer.com/chapter/10.1007%2F978-3-642-29069-5_62#page-1
12/12