Académique Documents
Professionnel Documents
Culture Documents
metastable -titanium alloy. The present study aims to examine the evolution of deformed texture and
recrystallization texture of the new alloy, to establish the crystal orientation dependence relationship of Youngs
modulus and to find the approach decreasing Youngs modulus of biomedical -Ti alloy by thermo-mechanical
processing.
Although (1 1 1) oriented slices are the standard of industry, the advent of beam lead technology and dielectric
isolated structures has made the use of (100) and (1 10) orientations more common today. Thus, it is important
to understand the many effects of crystal orientation on silicon semiconductor processing, if these technologies
are to be successfully implemented. These results imply that the piezoelectric properties can be greatly enhanced
by adopting the [111] orientation for barium titanate single crystals or thin films.
cube texture in face centre or body centre cubic materials The texture {001} <100> is highly desirable in
substrates for high Tc superconductors. another texture known as Goss texture {110}<001> are usually desired
in magnetic materials, in which it is easy to magnetize in the cube edge <100> direction.
Although (1 1 1) oriented slices are the standard of industry, for barium titanate single
crystals or thin films the development of [111] orientation leads to the increase in
piezoelectric properties. By adopting the (100) and (1 10) crystal orientation on silicon
semiconductor processing the dielectric isolated properties enhanced. The cube texture
{001} <100> in face centre or body centre cubic materials are very common today. For high
temperature superconductors this texture is highly desirable. The development of Goss
texture {110}<001> leads to the increase in magnetic properties of the material.
The properties of materials are texture-specific, and development of unfavourable textures
can lead to the failure of the components. The texture control in the sheet depends on the
proper choice of the processing variables
The physical properties of titanium alloys are generally known very well; Titanium alloys
have a high strength-to-weight ratio, excellent corrosion resistance, low density (1/3 rd. the
density of steel) and compatibility with composite structure. It plays an important role in the
aerospace industry, automobile industry and structural works. To improve its mechanical
properties for the excited high end application it should be interpreted with the crystal
orientation or the texture of the material.
As we know that the evolution of texture during cold deformation and recrystallization heat
treatment has effect on mechanical properties of the material. For materials like cp-ti highly
anisotropic, the texture has great influence on the mechanical properties of the material. The
effect of crystal orientation on hardness of the material is very important as it decides the
other properties of the material like elasticity, toughness, and fatigue strength etc. Hardness of
an individual grain cannot decide the overall properties of the material therefore it required to
consider number of grains for understanding the importance of crystal orientation on
mechanical properties of the material.
About nanoindentation
The relationship between crystal orientation and mechanical properties of single crystal
materials are well investigated by number of researchers. However, there are less and limited
reckonable study on the polycrystalline materials. The present study aims to examine the
orientation dependence mechanical properties of cp-ti by thermomechanical processing.