Académique Documents
Professionnel Documents
Culture Documents
GNLW means horizontal spiral type which is a normal model of decanting centrifuge GN Solids. Decanter Centrifuge is
the last stage equipment in drilling mud system for solids control and mud cleaning. The superiority of Decanting
Centrifuge is embodied in the solids processing size. Decanter Centrifuge could remove the solid particles with size 2-7
microns using the principle of centrifugal action, it is an ideal choice for separating particles in drilling mud. Always there
is a screw pump or submersible pump to feed the mud to Decanter Centrifuge. After the drilling fluids being fed into the
centrifuge drum, under the function of centrifugal force, solid phase particles are pushed to the internal wall of the drum,
then to the solid discharge export of the small end of the drum and excreted. While the fluids is excreted from the
overflow hole of the large end. Such cycle is to achieve the purpose of continuous separation. High speed decanting
centrifuge are more effective for separation of fine solids.
If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!
Screw conveyors, sometimes called augers or auger conveyor, are used as an efficient way to move a wide
variety of materials. The auger is used to move material along a path using a helical screw. The process of
drilling with a helical bit involves aspects of both: the creation of the hole with the tip of the bit is drilling, while
moving the waste material out of the hole along the helical path is augering. Not all drilling involves augering (oil
field drilling uses a pump to move the material). Screw conveyors in oilfield are often used horizontally or at a
slight incline as an efficient way to move drilling fluids with drill cuttings.