Académique Documents
Professionnel Documents
Culture Documents
Product Dimensions
Power Source
Water Quantity (WASH)
Power Consumption(WASH)
Power Consumption(SPIN)
Power Consumption(DRY)
Power Consumption(WARM)
Maximal Input Power
Required Water Pressure
CODE NO.301-6-421S-101-40-
INSTRUCTION MANUAL
DRUM TYPE FRONT LOADING
WASHER DRYER
AWD-L703HCTP
AWD-L703HCT
CONTENTS
SAFETY NOTICE 2
NAME OF PARTS 3
To protect the user and other people's health and property, be sure to observe
the following safety notice.
ACCESSORIES 3
LOCK AND UNLOCK THE DOOR
WARNINGS
About dry
NAME OF PARTS
The door will be locked automatically when the machine get started, and the
Control Panel
Power Plug
Power Cord
Washer Door
Frame
When the lock light is on, press START/PAUSE button, the Wash/Spin tub
stop, then you will hear a clicking sound, which means the door has unlocked.
The door will not open if you directly pulled out the electrical plug.
If there is a power failure during the operation, wait for power on, press
POWER ON/ OFF button, door will be unlocked automatically.
Foam spill over if you open the door during washing process, use towel to
clean it.
The door can not be unlocked in high temperature or high ozone density states.
Wash/Spin Tub
Liquid detergent
and Bleach
Drain Hose
Adjustable Leg
Powder synthetic
detergents
For the undissolved
detergents, for example:
powder state soap,
dissolve it in advance,
then pour into the case.
ACCESSORIES
Softener
Instruction manual
Drain Hose
(Only for AWD-L703HCT)
Hose Band
Lid
SPEED button
WARM button
STERILIZATION button
ON/OFF
COURSE
COURSE button
Choose the right program
according to the type and
stained of clothes.
The light will be on after
certain program be chosen.
DRY
WASH
RINSE
SPIN
SPEED
WARM
DRY button
PROCESS button
START/PAUSE button
NORMAL USAGE
1.Preparation:
Load the laundry into the washer. Close the washer door.
Put the detergent and softener into the Detergent Case.
Connect the Drain Hose. Connect the Water Supply Hose to the
faucet and turn the faucet on. Plug the Power Cord into a
socket-outlet.
2.Press the
3.Press the
ON/OFF
1.Preparation:
Load the laundry into the washer. Close the washer door.
Put the detergent and softener into the Detergent Case.
Connect the Drain Hose. Connect the Water Supply Hose to the
faucet and turn the faucet on. Plug the Power Cord into a
socket-outlet.
2.Press the
ON/OFF
operation.
5.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
4.Press
time, rinse times, spin time, spin speed and water temperature.
5.Press the
operation.
Wash and Spin capacity below 3.0 kg in SYNTHETIC FIBER
course.
Wash and Spin capacity below 2.0 kg in the ECO-SPEEDY
course.
6.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
ON/OFF
3.Press the
3.Preparation:
Close the washer door.
Put the detergent into the Detergent Case.
Connect the Drain Hose. Connect the Water Supply Hose to the
faucet and turn the faucet on. Plug the Power Cord into a
socket-outlet.
4.Press the
4.Press the
5.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
ON/OFF
5.Press the
6.Press the
7.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
Do not use net bag for the machine washable blanket, otherwise the
washer vibrate abnormally and will be damaged in the spin process.
Do not tweak or roll clothes into a boll before put them into the tub.
Electric blanket and carpet are forbidden of wash.
100% villous and the long-villous blanket are forbidden of wash.
Wash capacity of 100% synthetic fiber below 3.0kg.
Wash capacity of 100% cotton blanket below 2.0kg.
Water temperature should not exceed 30.
10
ON/OFF
3.Press the
ON/OFF
4.Press the
operation.
4.Press
time, rinse times, spin time, spin speed and water temperature.
5.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
There maybe peculiar smell caused by little overflow ozone
during the operation, the density of it is safe, please use at
ease.
Do not use air wash for easily faded clothes.
No spin of wash/spin tub during the program, no need for
water.
If you need to open the washer door during air wash program,
press POWER ON/OFF or START/PAUSE button ,30 minutes
later the washer door will be unlocked.
11
7.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
PRESET function could not be used for DELICATE and TUB CLEAN
course.
To change the preset time, please press POWER ON/OFF button,
restart from step 2.
To cancel the preset, press POWER ON/OFF to shut off the electrical
power.
To check the preset procedure, press PRESET button, the washer will
show you the current preset setting for 5 seconds.
The actual ending time maybe different from the preset time as the
different of water pressure, drainage, type of clothes, water
temperatures, etc.
After the preset is started, the corresponding light will be turn on.
12
VARIOUS FUNCTIONS
ON/OFF
3.Press the
4.Press the
button.
5.Press the
operation.
6.At the end of operation, the buzzer will sound and the power will
be turned off automatically after 12 seconds.
Dry capacity should below 3.0kg.
Set the dry time shorter than standard to prevent wrinkle caused by too
much dry, then add more dry time according to the dry results.
When use the dry course only, spinning clothes firstly.
Untie the knot of clothes after spinning if necessary, then put them into
tub to dry.
Dry function could not be used for DELICATE and AIR WASH course.
13
If select this function, the buzzer will not sound at the end of operation.
Method of setting:
Press the POWER ON/OFF button and hold down the START/PAUSE button for
4 seconds until a sound from buzzer. Follow the above instruction to restart
buzzer.
WASHING TIPS
Check whether there is anything in the pockets (for example: coin, pin, clip,
paper, etc).
Zips shall be zipped close and buttons or hooks shall be fixed. The loose band
or ribbon shall be bound together.
Do not wash colored clothes together.
Follow the washing guide printed on the clothes' mark or the symbol types of
care label by the manufacturer.
Before first washing, use a white towel dipped in detergents to rub an uneasily
discovered place of the clothes for a moment, check whether there is color on
the white towel, if the color fade, be careful in washing the clothes.
If a part of clothes is too dirty, use a towel or soft brush dipped in detergents to
rub the dirty part slightly in a same direction. then put the clothes into machine.
The machine may shock heavily in spin when there is only few clothes or single
big and heavy dress, add 2~3 pieces of clothes into the tub to relieve shock.
14
NORMAL
6.2
HEAVY
DUTY
6 .2
SOFT
WASH
6.2
CUSTOM
6 .2
BLANKET
3 .0
30
30
RINSE
TIMES
Washer body
700
approx.
Cold water2060105 0 14 1369500Max. 69 min.
30
50
105 0 14
Cold water2060
30
30
105 0 14
Cold water2060
700
1369500Max.
700
1369
approx.
105 min.
approx.
500
500900
900 64 min.
30
30
700
approx.
20
103 0 14
Cold water2030
6
136
700
approx.
500900 72 min.
2 Pull out
horizontally
ECO-SPEEDY
2 .0
SYNTHETIC
FIBER
3 .5
DELICATE
AIR
WASH
TUB
CLEAN
2 .0
10
103 0 14
30
30
700
1369 500900
approx.
33 min.
700
approx.
Cold water2040103 0 14 1369 500900 69 min.
20
103 0 14 13
Cold water2030
500
approx.
69 min.
approx.
46 min.
Faucet
Revolver
700
approx.
500900 60 min.
NOTES
1.Washing time changes in different water pressure, drain situation, clothes
texture, weight, temperature, etc.
2.The needed washing and dry time displayed during operation could be
different from the actual time needed.
3.As the quantity of clothes and detergents type are different, rinse result
maybe not ideal if the spin speed is slow. In this case, add the rinse times.
4.Parameter in the above chart will be different as the machine types are
different.
15
Magic
Hose Joint
Water
Supply Hose
46
50
16
NO TROUBLE CONDITIONS
SITUATION
REASON
Peculiar smell.
wash clothes.
No water inflow.
Drainage water in
during washing.
Remaining time
changes
Abnormal sound in
spin process.
Kind Of
Trouble
The washer
does not
work at all.
Water does
not flow into
the Wash/
Spin Tub or
water flow is
slim.
Sound of water flow in Cold water is needed in dry process to cool and dehumidify
dry.
the clothes.
17
Failure of
spin
Program stops when
power off
Where To Check
Failure of
open the
door
Press START/PAUSE
or POWER ON/ OFF
button, and the door
will open automatically
30 minutes later.
18
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
How to Attach the Magic Hose Joint
Transportation
Two people are required in transportation. The
washer should be kept upright, each people hold
the bottom of one side to move the machine.
To protect the machine in transportation, there are two bolts inserted into the inner part
of the machine. Remove these bolts before use. (otherwise there will be strong shock,
noise, and disfunction in spin process.)
1
1.Unscrew the bolts that are fixed before
transportation by spanner(two bolts)
2.Remove the bolts horizontally.
2
3.Fit the lid into the holes .
Let the sales force or professional
maintenance worker to install the machine.
Keep the dismounted bolts carefully ,
you will need them in house moving.
NOTE:
Detach the protection washer
before use the machine.
19
1.Loosen the four screws and slide the top of the "Magic"Hose Joint(section A in the
figure)onto the faucet. Then, securely tighten the four screws provided with the
Magic" Hose Joint by using a screwdriver to secure the top of the joint to the faucet.
2.Remove the CAUTION label from the "Magic" Hose Joint.
3.Turn the male coupler on the joint (section B in the figure) clockwise to attach it securely
to the top of the joint (section A in the figure).
The appliance is to be connected to the
water mains using new Water Supply
Screw
After tightened
Hose and Magic" Hose Joint and old
About 4mm
hose-sets should not be reused.
(About 2mm or less)
CAUTION
label
CAUTION:
If outer diameter of faucet is larger than
calibre of the Joint Ring, loosen the four
Joint Ring
screws and remove the Joint Ring from
the "Magic" Hose Joint.
B
Nut
Lock Lever
Sleeve
D
20
INSTALLATION INSTRUCTIONS
FOR WASHER PLUG TOP 3 PIN ( For BS Standard Plug With A 13 Amp Fuse )
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green/yellow: Earth
Drain Hose
Brown: Live
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
Hose Band
Max.3m
Max.10cm
The wire which is coloured green and yellow must be connected to the terminal
in the plug which is marked with the letter E or by the earth symbol
or coloured green or green and yellow.
The wire which is coloured light blue must be connected to the terminal which is
marked with the letter N or coloured white.
The wire which is coloured brown must be connected to the terminal which is marked
with the letter L or coloured black.
Wipe the Power Plug with a soft cloth and remove any dust to prevent a risk of the
accidental fire before plugging into the socket-outlet.
To prevent electric shock, be sure to provide adequate
electrical grounding for the washer.
Do not plug two Power Cords in one socket-outlet.
2.
Drain Hose
Grounding
Terminal
Grounding
Wire Of
Washer
Max.1200 mm
Drain Hose
21
Grounding
Rod
Grounding
Wire
22