Académique Documents
Professionnel Documents
Culture Documents
,
at D-SCC Complex, Ayodhyanagar, Bhopal. (Civil, PH & Electrical works)
PART - A(i) Security Cabin & Rest Rooms - Civil works (Comprising of Morcha, SS
Masonry Jali & M.S. Gate)
Schedule of Quantities
Item
No
1
Rate
Quantity
Description of Item
120.00 SQM Providing and injecting Chemical emulsion for PRECONSTRUCTIONAL Anti-termite treatment and creating
a chemical barrier on top surface of plinth filling, junction
of inside wall and floor, on top of damp proof
course(DPC) or on masonry at the level of plinth filling
as per IS 6313(part-II)-1981 using chemicals like
Chloropyripos emulsifiable (IS: 8944-1978) 20EC mixed
with water in 1:19 ratio (i.e., 1 liter of Chemical to 19
liters of water). The emulsion is spread at 5 lit/sqm on
top surface of plinth filling, top of Damp proof course and
at 1 lit/linear meter along the junction of wall and floor,
all as per specifications and directions. (Plinth area of
the building at Ground floor only shall be measured)
Unit
Amount
SQM
EARTH WORK
2
CUM
CUM
CUM
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
CUM
CUM
CUM
CUM
0.25
CUM
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
0.75
CUM
10
CUM
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
11
20.00
CUM
42.00
CUM
stones of width not less than 150mm with the all edges
chisel dressed and forming a jali structure as per the
drawing using cement mortar 1:4 with joints thickness
not more than 25mm.
12
SQM a)
SQM
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
13
Description of Item
Unit
Amount
14.00
CUM a)
14
CUM
15
CUM
CUM
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
16
Description of Item
Unit
Amount
CUM
CUM
17
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
18
CUM
CUM
FORMWORK
19
SQM
SQM
SQM
SQM
SQM
9.00
landings.
52.00
SQM
STEEL
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
6.00
MT
21
MT
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
MT
0.15
MT
MT
i) For MS gates
b) In MS rectangular/ MS medium tubes
MT
22
23
SQM
22.00
MTR
SQM a) In flooring
SQM
9.00
MTR
10
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
25
Description of Item
Unit
Amount
SQM
SQM
SQM a) In flooring
SQM
55.00
RMT
27
JOINERY
Supplying and fixing solid hard core non decorative
type(BN) interior grade commercial BLOCK BOARD
FLUSH DOOR SHUTTERS of approved make
conforming to IS-2202 (part-I) - 1991 with teak wood
internal lipping on all sides and solid teak wood inserts
for mounting locks, etc; having well matched commercial
ply veneering with cross bands and face veneers on
both faces, including cost of labour for fixing builder's
hardware and locking arrangement etc; complete all as
per specifications including cost of the following builder's
hardware with three nos. of hinges for each shutter with
necessary screws confirming to ISI for each door.
11
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
28
SQM
12
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
KGS
KGS
SQM
SQM
13
No. of Deletions :
No. of Omissions :
Item
No
Quantity
30
Rate
Description of Item
Unit
Amount
31
SQM
14
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
MTR
15
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
33
SQM
KGS
combination of both)
34
ROOFING
160.00 SQM Providing and laying water proofing treatment over RCC
roof in 3 courses, as specified below, after thoroughly
cleaning surface of the roof slab with wire brush,
cleaning of dust and foreign matters, raking and
cleaning of construction joints if any etc., complete to
make the surface suitable for receiving water proofing
treatment.
I COURSE : The existing covering on slab to be
removed and the surface of the RCC slab exposed.
Construction joints if any are to be raked and cleaned. A
coat of cement slurry at the rate of 4.4kg/sqm mixed with
acrylic water proofing compound (as per manufacturers
specification) is spread uniformly over the RCC roof
area
SQM
16
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
17
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
35
Providing and fixing rigid PVC SWR (soil, waste and rain
water) drainage / rain water pipe conforming to Type-A
IS 13592-1992, including accessories like bends and
fixing with clamp at not more than 1.20m c/c fabricated
using MS flat of 30mmx6mm and 30mmx3mm fixed to
masonry or RCC member using anchor fasteners etc.,.
as per the design and manufacturer's specifications
etc., complete all as per specifications and directions of
Engineer in charge. and directions of Engineer in
charge. Rate to include cost of providing a shoe at the
lower end of each RWP & painting of pipes & clamps
with two coats of synthetic enamel paint of approved
make & colour.
13.50
MTR
1.80 mm.
36
Each
18
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
Description of Item
Unit
Amount
FINISHING
Note :
1. The wording "more coats" indicate the additional
coats to be painted, whenever the desired finish has not
been achieved after the application of the specified
number of coats required to be rendered on account of
the above.
2. For plastering items, the rate to include cost of
providing grooves of size 10mm x10mm around doors,
window, ventilators and at junction of dissimilar materials
for internal and external plastering. No extra is
permissible
3. Rates for all finishing items should include lift charges
from FFL/G.L for all heights, depths and levels.
4. All the RCC faces like beam, slabs, lintels, coloums,
flush with internal or external wall faces are plastered
with CM 1:5 and measured under wall plastering and not
under item of CM 1 :4 for RCC surfaces.
5. Rates for all finishing items shall cater for plain or
curved surfaces wherever applicable at all floors and no
extra shall be admissible.
37
SQM
105.00 SQM ii) 12mm thick in C.M 1:4 with lime neeru
SQM
38
SQM
SQM
19
No. of Deletions :
No. of Omissions :
Item
No
Rate
Quantity
39
Description of Item
Unit
Amount
SQM
40
SQM
41
SQM
42
75.00
SQM
43
13.00
SQM
20
No. of Deletions :
No. of Omissions :
Item
No
5.00
44
Rate
Quantity
30.00
Description of Item
Unit
SQM
SQM
Amount
46
100.00
RMT
KGS
TOTAL Rs.
21
No. of Deletions :
No. of Omissions :
Item
No
Quantity
Rate
Description of Item
Unit
Amount
22
No. of Deletions :
No. of Omissions :