Académique Documents
Professionnel Documents
Culture Documents
Living
Outside
Play
Technology
Workshop
Table of Contents
Creating Custom 3D Cribbage Boards With a Laser Cutter! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step 1: Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 2: Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 3: Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step 4: Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Step 5: Grab some cards and a friend and play some cribbage! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
Step 1: Design
So for my designs I usually use adobe illustrator just because it's so easy and basic, as well as being able to save and export into .dxf/autocad for the Laser.
The first thing you want to do is make sure all your lines and measurements are in inches. Second, make sure the color mode is RGB for the document. And when
choosing colors/swatches to use Basic RGB, this makes it easy to export and be read/manipulated by the laser software. All lines including text strokes need to be 0.001
.in. in order to be read by the laser. Depending on the laser and the laser program you use it may not recognize a wide palette of colors. *Get to know your Laser*
The first images here are to illustrate how to set up your cuts, once you have a design in mind you will need to build it layer by layer, thinking of the final product in 5mm
slices ( or how ever thick your material is).
In pic#3: Example I show the Lobster Trap cribbage board. It contains 7 layers total, 6 full cuts and a top layer of accents. pic#4 Shows how the layers look all stacked
together.
Picture #5: Shows how you can line up holes for an elliptical style path. For each cribbage player there need to be 120 peg holes, with 1 'finish' hole or 121 hole. 2
players = (120 x 2) + 1 , 3 players = (120 x 3) +1. and so on. And most people like to have a starting area, so that's 2-3 holes before the game holes. :)
The remaining photos are the basic illustrator files taken into photoshop and made into preview renders of how they 'could' look when finished. This is done by simply
dropping in a wood backdrop and adding some fills and effects.
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
File Downloads
Step 2: Cutting
Once you have your design down, now it's time to cut!
So what you need to do is get the file ready for the laser. To do that we need to export it as a DXF, which is as easy as selecting file > export. and choosing .dxf from the
export menu. Then make sure if to use the setting in the photo if you're using the Universal Laser like I am.
Once the file is saved and exported, you can transfer it over to the Laser Cutter software. Here you can make changes to the POWER and SPEED of the laser. You can
choose these settings for each vector line by Color. This is really something you should test and try yourself to find which settings work best for the look you're going for.
You can then download the file onto the Laser for cutting, and place your wood material into the cutting bed.
Basic rules:
+ Slow speed & High Power = Cut
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
Step 3: Assembly
*Needed*
+Clamps
+Wood glue
+Distilled White Vinegar
+ (twine if you want)
+Stain & Brushes & Rags
+Patience & Time
First things first, there's going to be some light charring and sugar deposited onto your recently cut wood pieces. I've found the best way to get rid of this mess is with
White Distilled Vinegar and a clean rag. Simply soak the rag in the vinegar and wipe clean with the grain of the wood. Let the vinegar dry out.
Once dry you can begin glueing the layers together. Make sure to cover every exposed area, use your finger if necessary. Don't worry about if it gets in the holes, you
can clear them out when it hardens with a small screwdriver or the pegs themselves. Use a nice liberal amount of glue, you can wipe the excess away.
Each layer needs to be glued, set and clamped one at a time otherwise you risk shifting layers. Allow time for each layer to dry.
Make sure when clamped you cover every inch, you can use weights for larger pieces if you have scrap to protect your work. Be very careful all edges line up and peg
holes are flush. This can be tricky.
Once all layers are attached and glue has dried, you can start on finishing touches. I like to use a glue wash on the outer edge to help longevity. It also helps when adding
a hemp twine border. The twine adds a layer of protection and strength.
I like to start by tying a loop around the bottom as shown in the last photo. Then securing it with a small amount of glue to dry. Once dry you can glue wash the outer
border and being wrapping the twine. Once the border is completely and tightly covered in twine give it a nice glue wash/ basically cover it in wood glue and wipe away
the excess, and allow to dry.
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
Step 4: Finishing
For finishing touches all thats left is staining and adding any accessories like peg hatches.
I like to use Cabot wood stains because I can get them tinted to the colors i need, and they mix well with other colors.
I find that staining with a brush is more precise and less wasteful. Also if doing water, you can apply different techniques to make the stain resemble water.
If you decide to use a rag, be careful and make sure to wipe away the excess stain.
Once dried, you can choose to add a shellac or an oil for added protection from fading.
Lastly, add some stick on felt pads to the bottom of the board. And for the bottom hatches I usually use the button hooks from the back of photo frames from the dollar
store. When you're on a budget and can't find anything locally you make due.
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
Step 5: Grab some cards and a friend and play some cribbage!
Thanks for looking, if you have any questions send me an email! ;)
www.etsy.com/shop/MainelyIdeas
www.facebook.com/MainelyIdeas
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
Related Instructables
Laser Cut
Cribbage Board
by melvinkat
Cribbage Board
Jig For A Drill
Press by
MikeCicc
Dive! Cribbage
Board (Photos)
by royshearer
Dive! Cribbage
Board by
royshearer
Nascar
Cribbage Board
by JoeGadget
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/
TwitMap:
Topographical
Colorado
Twitter Map by
ianisborn
Advertisements
Comments
13 comments Add Comment
MrTravisHiggins says:
shaman5188 says:
Being playing crib all my life. This board is simply beautiful, a true artist. Well done!
MrTravisHiggins says:
Thanks tina47!
tina47 says:
it is very beautiful!
MrTravisHiggins says:
andy.knote says:
MrTravisHiggins says:
www.facebook.com/MainelyIdeas
MrTravisHiggins says:
Thank you very much Supergirl! ;) Check out the facebook page, I'm always adding photos of new projects.
Mielameri says:
MrTravisHiggins says:
Thanks FivosC!
FivosC says:
MrTravisHiggins says:
Thanks jlepack!
jlepack says:
I love your map designs.
http://www.instructables.com/id/Creating-Custom-Cribbage-Boards/