Académique Documents
Professionnel Documents
Culture Documents
2005
PRODUCT
RANGE 2005
Miscellaneous
Tools
Accessories
sampling devices
health and safety items
depth indicators, measures
dip meters, bailers
GEOTOOL
Bodenuntersuchungsgerte GmbH & Co. KG
Am Trimbuschhof 13, D - 44628 Herne
Tel.: 02323 - 911.150
Fax: 02323 - 911.160
URL: http://www.geotool.de
E-mail: info@geotool.de
Company:
...............................................................................
Mr./Mrs.:
...............................................................................
adress:
...............................................................................
...............................................................................
telephone / fax
to:
...............................................................................
Fax-No.:
date: ...........................................
art.-No.
stamp/
signature:
amount
EUR/pc.
EUR/Total.
Undercarriage:
Mini excavator rubber chain crawler with 2 hydraulic gear motors and passive brake
1-cylinder-Diesel- or petrol engine with 2 direct driven hydraulic pumps
Overall width 780 mm; transport height ca. 1.250 mm, transport length ca. 2.100 mmm
Hydraulic system:
Tank
20 Liter bio-degradable hydraulic fluid
Pumps
160 bar
Hydraulic outlet for rod extraction jack with integrated autoreverse valve
Frame structure:
Adjustment range of the mast to reach vertical position in ondulated terrain
Lateral
15 degrees
Front
30 degrees
Rear
35 degrees
Drop weight::
basic weight 10 kg + 2 x 20 kg + 13,5 kg
Drop height:
500 and 750 mm
Blows per minute:
5 - 40
Single blow energy:
50 - 475 Nm
This compact unit is designed as a robust, powerful carrier which offers a variety of drilling methods for soil
investigation and other procedures. On the basis of an self-propelled industrial rubber chain crawler with
variable gauge, extremely able to negotiate rough terrain, inclines/declines up to 30 degrees, fully hydraulic
with integrated autoreverse rod extraction system, folding mast, with boxes for rods, take-up attachment for
accessories like hydraulic extraction jacks, clamping systems, table with 3 tube vice.
++
++
++
++
++
Rotary Drilling
flight and hollow stem augers
++
Diamond Coring
++
Special Applications
DTH hammers, core drilling
++
TECHNICAL DATA :
-
mini excavator rubber chain crawler with hydraulic gear motors and brakes
2 cylinder watercooled Diesel engine, 2 direct flanged hydraulic gear pumps, 160 bar
overall width 800 mm (1020 mm with extended crawler gauge), transport length ca. 2.350 mm; total
weight ca. 950 kg
hydraulic tank: 60 Liter biodegradable oil
hydraulic take-off for extraction system with integrated auto-reverse valve
mast alignment:
lateral
20 Grad
front
30 Grad
Rear
35 Grad
drop weights:
basic weight 10 kg + 20 kg + 20 kg + 13,5 kg or
basic weight 32 kg + 32 kg + 32 kg + 32 kg
drop:
500 and 750 mm
blows per minute:
10 - 30 (with drop weight mechanism)
single blow energy:
50 - 940 Nm (with drop weight mechanism)
LMSR-Ek
LMSR-Hk
SPT-V75k
125 kg
2.340 mm
780 mm
785 mm
1.200 mm max.
10 degrees
10 degrees
15 - 30, adjustable
10 kg
30 kg
50 kg
drop height:
500 mm
Honda engine
type GX100
aircooled 1-cylinder 4-stroke
97 cm , 1,9 kW, leadfree fuel,
1,4 l fuel reservoir capacity,
noise level 75 dB(A) at 3600 RPM
scope of supply:
unit ready to use, with rope winch, crank,
drop weight assembly, drop weight bodies 10 + 20 + 20
kg, blow counter, air bubble level
rod guiding pulleys and brass anvil piece for 22 or 32 mm
rods, wooden base plates, toolkit
rods, points or window sampling tubes not included
LMSR-Vk
This version is powered by a 110 or 230 Volt electric motor; apart from that it features the same
technical layout as the LMSR-V units. A suitable power pack or power supply is required.
TECHNICAL DATA:
basic weight: ca.
total height:
width:
length:
rod/tool length:
125 kg
2.340 mm
780 mm
785 mm
1.200 mm max.
10 degrees
10 degrees
ca. 25
10 kg
30 kg
50 kg
drop height:
500 mm
electric motor *
AC motor, 110 V or 220 Volt
1,1 kW at 2810 RPM, 50 Hz
* to be powered by a suitable
power pack:
110 V, ca. 3,6 kVA
scope of supply:
unit ready to use, with rope winch, crank,
drop weight assembly, drop weight bodies 10 + 20 + 20
kg, blow counter, air bubble level
rod guiding pulleys and brass anvil piece for 22 or 32
mm rods, wooden base plates, toolkit
rods, points or window sampling tubes not included
LMSR-Ek
TECHNICAL DATA:
110 kg
2.280 mm
780 mm
785 mm
1.200 mm max.
10 degrees
10 degrees
depending on
power source
10 kg
30 kg
50 kg
drop height:
500 mm
hydraulic motor
to be powered by a suitable power pack:
LMSR-Hk
scope of supply:
unit ready to use, with rope winch, crank,
drop weight assembly, drop weight bodies
10 + 20 + 20 kg, blow counter, air bubble level,
rod guiding pulleys and brass anvil piece for 22, 32 or 32
mm rod diameters, wooden base plates, toolkit
hydraulic power source, rods, points or window sampling
tubes not included
135 kg
2.600 mm
780 mm
785 mm
1.200 mm
10 degrees
10 degrees
15 - 25 per minute/adjustable
10 kg
30 kg
50 kg
63,5kg
750/500 mm
Honda engine
type GX100
air cooled 1-cylinder 4-stroke motor
97 cm , 1,9 kW ,
fuel tank capacity 1,4 l, lead free regular fuel
noise level 75 dB(A) at 3.600 R.P.M.
LMSR-SPT/Vk dynamic probing rig foldable mast, Honda engine article No.: 555412
ca.
130 kg
2.600 mm
780 mm
785 mm
1.200 mm
10 degrees
10 degrees
10 kg
30 kg
50 kg
63,5kg
750 mm
(500 mm with optional
drop height adaptor)
Dimensions
TECHNICAL DATA:
total weight:
drop weight:
height:
width:
length:
working length:
125 kg approx.
10 / 30 / 50 kg
2.340 mm (2.280 mm)
780 mm
785 mm
1.200 mm
LMSR
RSG
DPH
DPL dynamic
++
robust pneumatic drop weight cylinder with integrated air jack, 10 kg drop weight
and automatic pneumatic control
++
rod connection
with M16 thread
++
air hose
5 m long
++
++
This unit carries a mast guided drop weight of 200 kg at a drop height of 500 mm. Parted in single weight
bodies of 50 kg each it allows for 50 kg DP-H and 50, 100, 150 oder 200 kg drop weight window sampling
operations.
The mast can be hydraulically erected and laterally swiveled by means of a spindle. A vertical jack at the
mast joint sets up the machine on the mast foot and the two rubber chain crawler back ends giving a stable
three-point suspension while operating.
The mechanism to lift the drop weight follows the same principle as the field-proven smaller GEOTOOL
dynamic probing rigs. Moving of the drop weight carriage is achieved by a mechanic link to the chain/ chain
blocks.
rotary drilling with up to 3.000 Nm or 250 U/min. max. (flight auger/HSA drilling, core drilling)
for fast and heavy (window) sampling operations with hydraulic breakers up to 100 kgs
Technical Data:
Dimensions (Transport):
length: 2.900 mm, width: 1.100 mm, height: ca. 2.200 mm, weight: ca. 1.500 kg
Crawler:
Industrial rubber chain crawler, 230 mm chains, length 1.420 mm
2 hydraulic drive motors with brakes
Motor:
Deutz F2L 1011 two-cylinder Diesel engine, air-cooled, ca. 20 kW at 3.000 R.P.M.
Hydraulic system:
2 hydraulic pumps, directly coupled, 2 hydraulic circuits, oil reservoir 80 l, bio-degradable hydraulic fluid
control console with hand valves on the left hand side of the rig
Mast:
igid H-profile with hydraulic duplex chain drive, erected hydraulically, length 3.220 mm, swivels laterally
(15 degrees) by means of a spindle, tool length 1,5 m
pulling force 1,8 t
rod guide at mast foot
Mast carriage /drop weight mechanism:
roller-guided carriage, basic weight 50 kg, three additional weight bodies 50 kg each
latch/chain block mechanism
Rotary drive -optional- :
3000 Nm torque or 250 R.P.M. max.,
cardan joint with hex. connection 1 1/4
Hydraulic breaker -optional- :
25 to 100 kg weight,
Mounted on the drop weight frame or on a
separate mast carriage with roller guides
Article No.:
110200
HAND-HELD PENETROMETER
(MACINTOSH) according to DIN 4094
550100
Penetrometer equipment,
comprising
1
hand-held penetrometer
6
penetrometer rods 22 mm
1
point 5cm 2, M 16
Article number
550100
580221
580105
550110
550111
Accessories
rods 22mm
thread nipple M 16 x 50, mit beids. Innensechskant
key 19 mm
allan-key 8 mm
point 5 cm, M 16, 90
point 10 cm, M16, 90
sacrificial point 10 cm, 22 mm, 90
slotted samling rod 22 mm, PL 1.000 mm
Article number
Article number
Article number
Article number
Article number
Article number
Article number
Article number
589221
589228
589229
580151
580105
580110
580088
580322
Description
The system consists of three major components:
1.)
Sensor:
An incremental sensor is mounted on the rig which
reads the rotation of the drive chain in form of impulses. The unit is linked to the hydraulic motor/
sprocket by means of a flexible coupling inside a rigid metal protection cover.
2.)
Connection box LittleBox:
This metal clamp box connects the rig mounted sensor and motor cut-out cables and provides a
ready-made socket for the control unit cable. It is mounted at a protected location on the rig.
3.)
Control Unit BigBox:
A robust metal console (IP 65, see photo above) with key pad, illuminated LC- display and
pushbuttons carries all electronic components.
Borehole figures (No., date), rig factors (kind of probing, drop height, drop weight etc.) as well as
necessary inputs during the operation (for example rod change confirmation) are fed in by using
keys and pushbuttons.
An integrated automatic engine shut-off (autostop) function stops the rig motor either at a preset
max. depth or by pushbutton (emergency shut-off) control.
A transport case with battery charger and data readout connection cable to fit the PC is included in
the scope of delivery. All connection cable plugs and sockets are mechanically coded to avoid
mistakes.
++
easy-to-carry powerful hydraulic power pack 5/7 , with Honda 4-stroke petrol engine
(220/240 or 110 Volt electric motor optional)
++
with integrated auto-reverse cylinder control valve = automatic reverse control of jack movement
in top and bottom position of the cylinder without delay
++
++
++
CE - approved
++
Mobag
Hydraulic rod extraction unit, modular version
Small, powerful hydraulic pack with Honda GX100
4-stroke petrol engine (lead-free), in rigid tubular
steel frame.
Hydraulic auto-reverse valve controls the return of
oil flow at the end of the cylinder stroke
automatically, 2 m high pressure hoses with
quickcouplers,
Removable pole shaft, weels/axle, take-up for
hydraulic cylinder, clamps, etc.
big balloon tyred weel set with pole shaft for easy
transport in heavy terrain, take-up for hydraulic hoses,
all accessories sitting securely to the relevant takeups.
Pulling force according to the type of cylinder used is
80 160 kN (8 16 t).
robust, self-aligning, hollow cylinder (jack) , pulling force either 8 tons with 65 mm ID,
10 tons with 85 mm ID, 13 tons with 85 mm ID or 16 tons with 120 mm ID
(clamping devices optional)
++
powerful hydraulic power pack 11/12 , with Honda 4-stroke petrol engine, integrated in
a rigid tubular steel frame with wheels and handlebar (top cover, wheels, handles etc. can be removed)
++
with integrated auto-reverse cylinder control valve = automatic reverse control of jack movement
in top and bottom position of the cylinder without delay
++
++
++
CE - approved
++
type 65/8
570201
570210
570219
570218
570203
14 kg
8 kg
opening (ID):
55 mm
rod puller 20 kN
spare lever
23 kg
8 kg
opening (ID):
85 mm
rod puller 60 kN
spare lever
To clamp the rods and (window) sampling tubes of various sizes two alternative types of clamps are
used:
a)
b)
BALL CLAMPS
GEOTOOL ball clamps feature a double-ring ball design providing a better rod serving life.
A twin handle makes it easy to set the clamp on the rod pulling device; the clamps are
very robust and can transmit high pulling forces.
Clamping dia.s
weight
article number
22 - 36 mm
36 - 50 mm
78 - 88 mm
8,0 kg
9,3 kg
14,8 kg
570143
570144
570147
Claw clamps are nice to the rod material. By using one tapered pot along with different
claw clamp inserts all rod or window sampler diameters from 22 to 88 mm can be achieved.
Claw clamps are available in different standard sizes:
570300
570322
570332
570346
570350
570360
570378
589221
589228
589222
589229
580151
589321
589328
589322
589329
580151
589361
589368
589362
589369
580151
M16
M16
M20
M20
length
key size
articleNo.
M 16
M 20
M 22
50 mm
60 mm
60 mm
8 mm
8 mm
8 mm
589228
589328
589368
A wide range of accessories is available at GEOTOOLs like all relevant tools, driving heads,
sacrificial or fixed points, adaptors, window sampling tubes etc. for quick and safe work in
conjunction with the rods.
Driving Heads
Article No.s
Cobra 148/149
Wacker BH/EH 23
Makita HM 1400
Bosch USH27
M16
523151
524221
525122
526122
M20
523150
524220
525132
526132
M22
523149
524222
525142
526136
Different designs with a diameter of 36, 40, 50, 60 and 80 mm are available:
1.
thoroughly manufactured
resistant, hard steel shoe
head piece welded to tube with bevel on top side
head piece with cross hole from 50 mm diameter on
2 windows at 1 m sample length
4 windows at 2 m sample length
thread (stud) connection with size M 20 or M 22 nipple
2.
RKS 1
RKS 1
RKS 1
RKS 1
RKS 1
36 mm
40 mm
50 mm
60 mm
80 mm
length
length
1.000 mm M20 1.000 mm M22
thread
thread
911.360
911.400
911.500
911.600
911.800
911.362
911.402
911.502
911.602
911.802
Type RKS 2
length
length
detachable shoe, 1.000 mm M20 1.000 mm M22
reinforced
thread
thread
RKS 2
RKS 2
RKS 2
RKS 2
RKS 2
36 mm
40 mm
50 mm
60 mm
80 mm
36 mm
40 mm
50 mm
60 mm
80 mm
length
2.000 mm
M20 thread
length
2.000 mm
M22 thread
912.360
912.400
912.500
912.600
912.362
912.402
912.502
912.602
length
2.000 mm M20
thread
length
2.000 mm M22
thread
921.360
921.400
921.500
921.600
921.800
921.362
921.402
921.502
921.602
921.802
922.360
922.400
922.500
922.600
922.362
922.402
922.502
922.602
Spare shoe
Distance rings
922.366
922.406
922.506
922.606
922.806
922.367
922.407
922.507
922.607
922.807
PE core
retainer
922.368
922.408
922.508
922.608
922.808
922.369
922.409
922.509
922.609
922809
diameter
in mm
Spanner
flat mm
articlenumber
22
22
32
32
36
36
36
36
1.000
2.000
1.000
2.000
1.000
2.000
1.000
2.000
19
19
27
27
30
30
30
30
580322
580323
580332
580333
580336
580337
580338
580339
M 16
M 16
M 20
M 20
M 20
M 20
M 22
M 22
1.
2.
article No.:
543150
- 100 m
article No.:
543160
- 150 m
article No.:
543180
- 200 m
article No.:
543200
- 300 m
article No.:
543300
3.
article No.:
E43101
4.
water sampler (bailer) VV-2
0,25 l, steel/perspex,
length 350 mm, OD 40 mm,
with ball valve for sampling below
water level
with overflow inlet for sampling at
water surface
article No.:
5.
article No.:
543102
420091
105112
521112
521113
105118
521119
105125
521126
The GEOTOOL - hydraulic power packs feature an efficient specific oilflow at intermediate pressure levels.
Favourably they can be employed to power the GeoRam hydraulic breakers and hand tools. At the same
time they provide enough pressure and flow to make rod extraction with hydraulic jacks easy and quick.
The rigid design is specially layed out for rough field works.